mainmenu "uClinux/68k (w/o MMU) Kernel Configuration"
-config M68KNOMMU
+config M68K
bool
default y
bool
default n
-config UID16
- bool
- default y
-
config RWSEM_GENERIC_SPINLOCK
bool
default y
bool
default n
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
config GENERIC_CALIBRATE_DELAY
bool
default y
+config TIME_LOW_RES
+ bool
+ default y
+
source "init/Kconfig"
menu "Processor type and features"
help
Motorola ColdFire 5307 processor support.
+config M532x
+ bool "MCF532x"
+ help
+ Freescale (Motorola) ColdFire 532x processor support.
+
config M5407
bool "MCF5407"
help
config COLDFIRE
bool
- depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407)
+ depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407)
default y
-choice
- prompt "CPU CLOCK Frequency"
- default AUTO
-
-config CLOCK_AUTO
- bool "AUTO"
- ---help---
- Define the CPU clock frequency in use. On many boards you don't
- really need to know, so you can select the AUTO option. On some
- boards you need to know the real clock frequency to determine other
- system timing (for example baud rate dividors, etc). Some processors
- have an internal PLL and you can select a frequency to run at.
- You need to know a little about the internals of your processor to
- set this. If in doubt choose the AUTO option.
-
-config CLOCK_11MHz
- bool "11MHz"
- help
- Select a 11MHz CPU clock frequency.
-
-config CLOCK_16MHz
- bool "16MHz"
- help
- Select a 16MHz CPU clock frequency.
-
-config CLOCK_20MHz
- bool "20MHz"
- help
- Select a 20MHz CPU clock frequency.
-
-config CLOCK_24MHz
- bool "24MHz"
- help
- Select a 24MHz CPU clock frequency.
-
-config CLOCK_25MHz
- bool "25MHz"
- help
- Select a 25MHz CPU clock frequency.
-
-config CLOCK_33MHz
- bool "33MHz"
- help
- Select a 33MHz CPU clock frequency.
-
-config CLOCK_40MHz
- bool "40MHz"
- help
- Select a 40MHz CPU clock frequency.
-
-config CLOCK_45MHz
- bool "45MHz"
- help
- Select a 45MHz CPU clock frequency.
-
-config CLOCK_48MHz
- bool "48MHz"
- help
- Select a 48MHz CPU clock frequency.
-
-config CLOCK_50MHz
- bool "50MHz"
- help
- Select a 50MHz CPU clock frequency.
-
-config CLOCK_54MHz
- bool "54MHz"
- help
- Select a 54MHz CPU clock frequency.
-
-config CLOCK_60MHz
- bool "60MHz"
- help
- Select a 60MHz CPU clock frequency.
-
-config CLOCK_62_5MHz
- bool "62.5MHz"
- help
- Select a 62.5MHz CPU clock frequency.
-
-config CLOCK_64MHz
- bool "64MHz"
- help
- Select a 64MHz CPU clock frequency.
-
-config CLOCK_66MHz
- bool "66MHz"
- help
- Select a 66MHz CPU clock frequency.
-
-config CLOCK_70MHz
- bool "70MHz"
- help
- Select a 70MHz CPU clock frequency.
-
-config CLOCK_100MHz
- bool "100MHz"
- help
- Select a 100MHz CPU clock frequency.
-
-config CLOCK_140MHz
- bool "140MHz"
- help
- Select a 140MHz CPU clock frequency.
-
-config CLOCK_150MHz
- bool "150MHz"
- help
- Select a 150MHz CPU clock frequency.
-
-config CLOCK_166MHz
- bool "166MHz"
+config CLOCK_SET
+ bool "Enable setting the CPU clock frequency"
+ default n
help
- Select a 166MHz CPU clock frequency.
-
-endchoice
+ On some CPU's you do not need to know what the core CPU clock
+ frequency is. On these you can disable clock setting. On some
+ traditional 68K parts, and on all ColdFire parts you need to set
+ the appropriate CPU clock frequency. On these devices many of the
+ onboard peripherals derive their timing from the master CPU clock
+ frequency.
+
+config CLOCK_FREQ
+ int "Set the core clock frequency"
+ default "66666666"
+ depends on CLOCK_SET
+ help
+ Define the CPU clock frequency in use. This is the core clock
+ frequency, it may or may not be the same as the external clock
+ crystal fitted to your board. Some processors have an internal
+ PLL and can have their frequency programmed at run time, others
+ use internal dividers. In gernal the kernel won't setup a PLL
+ if it is fitted (there are some expections). This value will be
+ specific to the exact CPU that you are using.
+
+config CLOCK_DIV
+ int "Set the core/bus clock divide ratio"
+ default "1"
+ depends on CLOCK_SET
+ help
+ On many SoC style CPUs the master CPU clock is also used to drive
+ on-chip peripherals. The clock that is distributed to these
+ peripherals is sometimes a fixed ratio of the master clock
+ frequency. If so then set this to the divider ration of the
+ master clock to the peripheral clock. If not sure then select 1.
config OLDMASK
bool "Old mask 5307 (1H55J) silicon"
help
Support for the senTec COBRA5272 board.
+config AVNET5282
+ bool "Avnet 5282 board support"
+ depends on M528x
+ help
+ Support for the Avnet 5282 board.
+
config M5282EVB
bool "Motorola M5282EVB board support"
depends on M528x
help
Support for the SnapGear SecureEdge/MP3 platform.
+config M5329EVB
+ bool "Freescale (Motorola) M5329EVB board support"
+ depends on M532x
+ help
+ Support for the Freescale (Motorola) M5329EVB board.
+
+config COBRA5329
+ bool "senTec COBRA5329 board support"
+ depends on M532x
+ help
+ Support for the senTec COBRA5329 board.
+
config M5407C3
bool "Motorola M5407C3 board support"
depends on M5407
config FREESCALE
bool
default y
- depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3)
+ depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3)
config HW_FEITH
bool
bool
default y
depends on CPU16B
+
+config AVNET
+ bool
+ default y
+ depends on (AVNET5282)
config LARGE_ALLOCS
bool "Allow allocating large blocks (> 1MB) of memory"
Code Review / linux-2.6.git / blobdiff