486, 586, Pentiums, and various instruction-set-compatible chips by
AMD, Cyrix, and others.
+config GENERIC_TIME
+ bool
+ default y
+
config SEMAPHORE_SLEEPERS
bool
default y
menu "Processor type and features"
+config SMP
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, like most personal computers, say N. If
+ you have a system with more than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ singleprocessor machines. On a singleprocessor machine, the kernel
+ will run faster if you say N here.
+
+ Note that if you say Y here and choose architecture "586" or
+ "Pentium" under "Processor family", the kernel will not work on 486
+ architectures. Similarly, multiprocessor kernels for the "PPro"
+ architecture may not work on all Pentium based boards.
+
+ People using multiprocessor machines who say Y here should also say
+ Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+ Management" code will be disabled if you say Y here.
+
+ See also the <file:Documentation/smp.txt>,
+ <file:Documentation/i386/IO-APIC.txt>,
+ <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
choice
prompt "Subarchitecture Type"
default X86_PC
bool
default y
depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
+ select ACPI_NUMA
+
+config HAVE_ARCH_PARSE_SRAT
+ bool
+ default y
+ depends on ACPI_SRAT
config X86_SUMMIT_NUMA
bool
depends on HPET_TIMER && RTC=y
default y
-config SMP
- bool "Symmetric multi-processing support"
- ---help---
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, like most personal computers, say N. If
- you have a system with more than one CPU, say Y.
-
- If you say N here, the kernel will run on single and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- singleprocessor machines. On a singleprocessor machine, the kernel
- will run faster if you say N here.
-
- Note that if you say Y here and choose architecture "586" or
- "Pentium" under "Processor family", the kernel will not work on 486
- architectures. Similarly, multiprocessor kernels for the "PPro"
- architecture may not work on all Pentium based boards.
-
- People using multiprocessor machines who say Y here should also say
- Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
- Management" code will be disabled if you say Y here.
-
- See also the <file:Documentation/smp.txt>,
- <file:Documentation/i386/IO-APIC.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
- <http://www.tldp.org/docs.html#howto>.
-
- If you don't know what to do here, say N.
-
config NR_CPUS
int "Maximum number of CPUs (2-255)"
range 2 255
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
depends on SMP
- default off
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with Intel Pentium 4 chips with HyperThreading at a
Enabling this feature will cause a message to be printed when the P4
enters thermal throttling.
+config VM86
+ default y
+ bool "Enable VM86 support" if EMBEDDED
+ help
+ This option is required by programs like DOSEMU to run 16-bit legacy
+ code on X86 processors. It also may be needed by software like
+ XFree86 to initialize some video cards via BIOS. Disabling this
+ option saves about 6k.
+
config TOSHIBA
tristate "Toshiba Laptop support"
---help---
choice
depends on EXPERIMENTAL && !X86_PAE
- prompt "Memory split"
+ prompt "Memory split" if EMBEDDED
default VMSPLIT_3G
help
Select the desired split between kernel and user memory.
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
+config NODES_SHIFT
+ int
+ default "4" if X86_NUMAQ
+ default "3"
+ depends on NEED_MULTIPLE_NODES
+
config HAVE_ARCH_BOOTMEM_NODE
bool
depends on NUMA
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER && !X86_PC
+ depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
- Say Y here to experiment with turning CPUs off and on. CPUs
- can be controlled through /sys/devices/system/cpu.
+ Say Y here to experiment with turning CPUs off and on, and to
+ enable suspend on SMP systems. CPUs can be controlled through
+ /sys/devices/system/cpu.
- Say N.
-
-config DOUBLEFAULT
- default y
- bool "Enable doublefault exception handler" if EMBEDDED
- help
- This option allows trapping of rare doublefault exceptions that
- would otherwise cause a system to silently reboot. Disabling this
- option saves about 4k and might cause you much additional grey
- hair.
endmenu
tristate "NatSemi SCx200 support"
depends on !X86_VOYAGER
help
- This provides basic support for the National Semiconductor SCx200
- processor. Right now this is just a driver for the GPIO pins.
+ This provides basic support for National Semiconductor's
+ (now AMD's) Geode processors. The driver probes for the
+ PCI-IDs of several on-chip devices, so its a good dependency
+ for other scx200_* drivers.
- If you don't know what to do here, say N.
+ If compiled as a module, the driver is named scx200.
- This support is also available as a module. If compiled as a
- module, it will be called scx200.
+config SCx200HR_TIMER
+ tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
+ depends on SCx200 && GENERIC_TIME
+ default y
+ help
+ This driver provides a clocksource built upon the on-chip
+ 27MHz high-resolution timer. Its also a workaround for
+ NSC Geode SC-1100's buggy TSC, which loses time when the
+ processor goes idle (as is done by the scheduler). The
+ other workaround is idle=poll boot option.
+
+config K8_NB
+ def_bool y
+ depends on AGP_AMD64
source "drivers/pcmcia/Kconfig"