Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

[linux-2.6.git] / arch / blackfin / mach-bf518 / boards / ezbrd.c

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 01975c0171168a656a558c423da183534e2549a7..44d6d5299022dbba305e8b83b8fa21c5c664dfd7 100644 (file)
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -382,30 +382,93 @@ static struct platform_device bfin_spi1_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
        {
-               .start = 0xFFC00400,
-               .end = 0xFFC004FF,
+               .start = UART0_THR,
+               .end = UART0_GCTL+2,
                .flags = IORESOURCE_MEM,
        },
+       {
+               .start = IRQ_UART0_RX,
+               .end = IRQ_UART0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_UART0_ERROR,
+               .end = IRQ_UART0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART0_TX,
+               .end = CH_UART0_TX,
+               .flags = IORESOURCE_DMA,
+       },
+       {
+               .start = CH_UART0_RX,
+               .end = CH_UART0_RX,
+               .flags = IORESOURCE_DMA,
+       },
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+       P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+       .name = "bfin-uart",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+       .resource = bfin_uart0_resources,
+       .dev = {
+               .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+       },
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
        {
-               .start = 0xFFC02000,
-               .end = 0xFFC020FF,
+               .start = UART1_THR,
+               .end = UART1_GCTL+2,
                .flags = IORESOURCE_MEM,
        },
-#endif
+       {
+               .start = IRQ_UART1_RX,
+               .end = IRQ_UART1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_UART1_ERROR,
+               .end = IRQ_UART1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = CH_UART1_TX,
+               .end = CH_UART1_TX,
+               .flags = IORESOURCE_DMA,
+       },
+       {
+               .start = CH_UART1_RX,
+               .end = CH_UART1_RX,
+               .flags = IORESOURCE_DMA,
+       },
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+       P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
        .name = "bfin-uart",
        .id = 1,
-       .num_resources = ARRAY_SIZE(bfin_uart_resources),
-       .resource = bfin_uart_resources,
+       .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+       .resource = bfin_uart1_resources,
+       .dev = {
+               .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -499,16 +562,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -593,7 +715,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-       &bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+       &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+       &bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -610,9 +737,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
        &bfin_device_gpiokeys,
@@ -644,6 +775,33 @@ static int __init ezbrd_init(void)
 
 arch_initcall(ezbrd_init);
 
+static struct platform_device *ezbrd_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+       &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+       &bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+       &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+       &bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+       printk(KERN_INFO "register early platform devices\n");
+       early_platform_add_devices(ezbrd_early_devices,
+               ARRAY_SIZE(ezbrd_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
        /* workaround reboot hang when booting from SPI */