Merge branch 'topic/hda' into for-linus

[linux-2.6.git] / Documentation / sound / alsa / ALSA-Configuration.txt

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 841a9365d5fdd67b5018c7551ff7bb2433056c8a..ab163b701f9dc136034354a95678e1966d7d1345 100644 (file)
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -346,6 +346,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     sbirq      - IRQ # for CMI8330 chip (SB16)
     sbdma8     - 8bit DMA # for CMI8330 chip (SB16)
     sbdma16    - 16bit DMA # for CMI8330 chip (SB16)
+    fmport     - (optional) OPL3 I/O port
+    mpuport    - (optional) MPU401 I/O port
+    mpuirq     - (optional) MPU401 irq #
 
     This module supports multiple cards and autoprobe.
 
@@ -388,34 +391,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
     
-  Module snd-cs4232
-  -----------------
-
-    Module for sound cards based on CS4232/CS4232A ISA chips.
-
-    isapnp     - ISA PnP detection - 0 = disable, 1 = enable (default)
-
-    with isapnp=0, the following options are available:
-
-    port       - port # for CS4232 chip (PnP setup - 0x534)
-    cport      - control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
-    mpu_port   - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
-    fm_port    - FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
-    irq                - IRQ # for CS4232 chip (5,7,9,11,12,15)
-    mpu_irq    - IRQ # for MPU-401 UART (9,11,12,15)
-    dma1       - first DMA # for CS4232 chip (0,1,3)
-    dma2       - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
-    
-    This module supports multiple cards. This module does not support autoprobe
-    (if ISA PnP is not used) thus main port must be specified!!! Other ports are
-    optional.
-
-    The power-management is supported.
-    
   Module snd-cs4236
   -----------------
 
-    Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
+    Module for sound cards based on CS4232/CS4232A,
+                                  CS4235/CS4236/CS4236B/CS4237B/
                                    CS4238B/CS4239 ISA chips.
 
     isapnp     - ISA PnP detection - 0 = disable, 1 = enable (default)
@@ -437,6 +417,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+    This module is aliased as snd-cs4232 since it provides the old
+    snd-cs4232 functionality, too.
+
   Module snd-cs4281
   -----------------
 
@@ -606,6 +589,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
 
     port       - port # for ES-1688 chip (0x220,0x240,0x260)
+    fm_port    - port # for OPL3 (option; share the same port as default)
     mpu_port   - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
     irq                - IRQ # for ES-1688 chip (5,7,9,10)
     mpu_irq    - IRQ # for MPU-401 port (5,7,9,10)
@@ -757,6 +741,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     model      - force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
+                 When the bit 8 (0x100) is set, the lower 8 bits are used
+                 as the "fixed" codec slots; i.e. the driver probes the
+                 slots regardless what hardware reports back
     probe_only - Only probing and no codec initialization (default=off);
                  Useful to check the initial codec status for debugging
     bdl_pos_adj        - Specifies the DMA IRQ timing delay in samples.