/* cpu.c: Dinky routines to look for the kind of Sparc cpu * we are on. * * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) */ #include #include #include #include #include #include #include #include #include #include #include DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 }; struct cpu_iu_info { int psr_impl; int psr_vers; char* cpu_name; /* should be enough I hope... */ }; struct cpu_fp_info { int psr_impl; int fp_vers; char* fp_name; }; /* In order to get the fpu type correct, you need to take the IDPROM's * machine type value into consideration too. I will fix this. */ struct cpu_fp_info linux_sparc_fpu[] = { { 0, 0, "Fujitsu MB86910 or Weitek WTL1164/5"}, { 0, 1, "Fujitsu MB86911 or Weitek WTL1164/5 or LSI L64831"}, { 0, 2, "LSI Logic L64802 or Texas Instruments ACT8847"}, /* SparcStation SLC, SparcStation1 */ { 0, 3, "Weitek WTL3170/2"}, /* SPARCstation-5 */ { 0, 4, "Lsi Logic/Meiko L64804 or compatible"}, { 0, 5, "reserved"}, { 0, 6, "reserved"}, { 0, 7, "No FPU"}, { 1, 0, "ROSS HyperSparc combined IU/FPU"}, { 1, 1, "Lsi Logic L64814"}, { 1, 2, "Texas Instruments TMS390-C602A"}, { 1, 3, "Cypress CY7C602 FPU"}, { 1, 4, "reserved"}, { 1, 5, "reserved"}, { 1, 6, "reserved"}, { 1, 7, "No FPU"}, { 2, 0, "BIT B5010 or B5110/20 or B5210"}, { 2, 1, "reserved"}, { 2, 2, "reserved"}, { 2, 3, "reserved"}, { 2, 4, "reserved"}, { 2, 5, "reserved"}, { 2, 6, "reserved"}, { 2, 7, "No FPU"}, /* SuperSparc 50 module */ { 4, 0, "SuperSparc on-chip FPU"}, /* SparcClassic */ { 4, 4, "TI MicroSparc on chip FPU"}, { 5, 0, "Matsushita MN10501"}, { 5, 1, "reserved"}, { 5, 2, "reserved"}, { 5, 3, "reserved"}, { 5, 4, "reserved"}, { 5, 5, "reserved"}, { 5, 6, "reserved"}, { 5, 7, "No FPU"}, { 9, 3, "Fujitsu or Weitek on-chip FPU"}, }; #define NSPARCFPU (sizeof(linux_sparc_fpu)/sizeof(struct cpu_fp_info)) struct cpu_iu_info linux_sparc_chips[] = { /* Sun4/100, 4/200, SLC */ { 0, 0, "Fujitsu MB86900/1A or LSI L64831 SparcKIT-40"}, /* borned STP1012PGA */ { 0, 4, "Fujitsu MB86904"}, { 0, 5, "Fujitsu TurboSparc MB86907"}, /* SparcStation2, SparcServer 490 & 690 */ { 1, 0, "LSI Logic Corporation - L64811"}, /* SparcStation2 */ { 1, 1, "Cypress/ROSS CY7C601"}, /* Embedded controller */ { 1, 3, "Cypress/ROSS CY7C611"}, /* Ross Technologies HyperSparc */ { 1, 0xf, "ROSS HyperSparc RT620"}, { 1, 0xe, "ROSS HyperSparc RT625 or RT626"}, /* ECL Implementation, CRAY S-MP Supercomputer... AIEEE! */ /* Someone please write the code to support this beast! ;) */ { 2, 0, "Bipolar Integrated Technology - B5010"}, { 3, 0, "LSI Logic Corporation - unknown-type"}, { 4, 0, "Texas Instruments, Inc. - SuperSparc-(II)"}, /* SparcClassic -- borned STP1010TAB-50*/ { 4, 1, "Texas Instruments, Inc. - MicroSparc"}, { 4, 2, "Texas Instruments, Inc. - MicroSparc II"}, { 4, 3, "Texas Instruments, Inc. - SuperSparc 51"}, { 4, 4, "Texas Instruments, Inc. - SuperSparc 61"}, { 4, 5, "Texas Instruments, Inc. - unknown"}, { 5, 0, "Matsushita - MN10501"}, { 6, 0, "Philips Corporation - unknown"}, { 7, 0, "Harvest VLSI Design Center, Inc. - unknown"}, /* Gallium arsenide 200MHz, BOOOOGOOOOMIPS!!! */ { 8, 0, "Systems and Processes Engineering Corporation (SPEC)"}, { 9, 0, "Fujitsu or Weitek Power-UP"}, { 9, 1, "Fujitsu or Weitek Power-UP"}, { 9, 2, "Fujitsu or Weitek Power-UP"}, { 9, 3, "Fujitsu or Weitek Power-UP"}, { 0xa, 0, "UNKNOWN CPU-VENDOR/TYPE"}, { 0xb, 0, "UNKNOWN CPU-VENDOR/TYPE"}, { 0xc, 0, "UNKNOWN CPU-VENDOR/TYPE"}, { 0xd, 0, "UNKNOWN CPU-VENDOR/TYPE"}, { 0xe, 0, "UNKNOWN CPU-VENDOR/TYPE"}, { 0xf, 0, "UNKNOWN CPU-VENDOR/TYPE"}, }; #define NSPARCCHIPS (sizeof(linux_sparc_chips)/sizeof(struct cpu_iu_info)) char *sparc_cpu_type; char *sparc_fpu_type; unsigned int fsr_storage; void __init cpu_probe(void) { int psr_impl, psr_vers, fpu_vers; int i, psr; psr_impl = ((get_psr()>>28)&0xf); psr_vers = ((get_psr()>>24)&0xf); psr = get_psr(); put_psr(psr | PSR_EF); fpu_vers = ((get_fsr()>>17)&0x7); put_psr(psr); for(i = 0; i