]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - sound/drivers/vx/vx_core.c
Merge branch 'generic-ipi' into generic-ipi-for-linus
[linux-2.6.git] / sound / drivers / vx / vx_core.c
1 /*
2  * Driver for Digigram VX soundcards
3  *
4  * Hardware core part
5  *
6  * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
7  *
8  *   This program is free software; you can redistribute it and/or modify
9  *   it under the terms of the GNU General Public License as published by
10  *   the Free Software Foundation; either version 2 of the License, or
11  *   (at your option) any later version.
12  *
13  *   This program is distributed in the hope that it will be useful,
14  *   but WITHOUT ANY WARRANTY; without even the implied warranty of
15  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  *   GNU General Public License for more details.
17  *
18  *   You should have received a copy of the GNU General Public License
19  *   along with this program; if not, write to the Free Software
20  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
21  */
22
23 #include <linux/delay.h>
24 #include <linux/slab.h>
25 #include <linux/interrupt.h>
26 #include <linux/init.h>
27 #include <linux/device.h>
28 #include <linux/firmware.h>
29 #include <sound/core.h>
30 #include <sound/pcm.h>
31 #include <sound/asoundef.h>
32 #include <sound/info.h>
33 #include <asm/io.h>
34 #include <sound/vx_core.h>
35 #include "vx_cmd.h"
36
37 MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
38 MODULE_DESCRIPTION("Common routines for Digigram VX drivers");
39 MODULE_LICENSE("GPL");
40
41
42 /*
43  * vx_check_reg_bit - wait for the specified bit is set/reset on a register
44  * @reg: register to check
45  * @mask: bit mask
46  * @bit: resultant bit to be checked
47  * @time: time-out of loop in msec
48  *
49  * returns zero if a bit matches, or a negative error code.
50  */
51 int snd_vx_check_reg_bit(struct vx_core *chip, int reg, int mask, int bit, int time)
52 {
53         unsigned long end_time = jiffies + (time * HZ + 999) / 1000;
54 #ifdef CONFIG_SND_DEBUG
55         static char *reg_names[VX_REG_MAX] = {
56                 "ICR", "CVR", "ISR", "IVR", "RXH", "RXM", "RXL",
57                 "DMA", "CDSP", "RFREQ", "RUER/V2", "DATA", "MEMIRQ",
58                 "ACQ", "BIT0", "BIT1", "MIC0", "MIC1", "MIC2",
59                 "MIC3", "INTCSR", "CNTRL", "GPIOC",
60                 "LOFREQ", "HIFREQ", "CSUER", "RUER"
61         };
62 #endif
63         do {
64                 if ((snd_vx_inb(chip, reg) & mask) == bit)
65                         return 0;
66                 //msleep(10);
67         } while (time_after_eq(end_time, jiffies));
68         snd_printd(KERN_DEBUG "vx_check_reg_bit: timeout, reg=%s, mask=0x%x, val=0x%x\n", reg_names[reg], mask, snd_vx_inb(chip, reg));
69         return -EIO;
70 }
71
72 EXPORT_SYMBOL(snd_vx_check_reg_bit);
73
74 /*
75  * vx_send_irq_dsp - set command irq bit
76  * @num: the requested IRQ type, IRQ_XXX
77  *
78  * this triggers the specified IRQ request
79  * returns 0 if successful, or a negative error code.
80  * 
81  */
82 static int vx_send_irq_dsp(struct vx_core *chip, int num)
83 {
84         int nirq;
85
86         /* wait for Hc = 0 */
87         if (snd_vx_check_reg_bit(chip, VX_CVR, CVR_HC, 0, 200) < 0)
88                 return -EIO;
89
90         nirq = num;
91         if (vx_has_new_dsp(chip))
92                 nirq += VXP_IRQ_OFFSET;
93         vx_outb(chip, CVR, (nirq >> 1) | CVR_HC);
94         return 0;
95 }
96
97
98 /*
99  * vx_reset_chk - reset CHK bit on ISR
100  *
101  * returns 0 if successful, or a negative error code.
102  */
103 static int vx_reset_chk(struct vx_core *chip)
104 {
105         /* Reset irq CHK */
106         if (vx_send_irq_dsp(chip, IRQ_RESET_CHK) < 0)
107                 return -EIO;
108         /* Wait until CHK = 0 */
109         if (vx_check_isr(chip, ISR_CHK, 0, 200) < 0)
110                 return -EIO;
111         return 0;
112 }
113
114 /*
115  * vx_transfer_end - terminate message transfer
116  * @cmd: IRQ message to send (IRQ_MESS_XXX_END)
117  *
118  * returns 0 if successful, or a negative error code.
119  * the error code can be VX-specific, retrieved via vx_get_error().
120  * NB: call with spinlock held!
121  */
122 static int vx_transfer_end(struct vx_core *chip, int cmd)
123 {
124         int err;
125
126         if ((err = vx_reset_chk(chip)) < 0)
127                 return err;
128
129         /* irq MESS_READ/WRITE_END */
130         if ((err = vx_send_irq_dsp(chip, cmd)) < 0)
131                 return err;
132
133         /* Wait CHK = 1 */
134         if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
135                 return err;
136
137         /* If error, Read RX */
138         if ((err = vx_inb(chip, ISR)) & ISR_ERR) {
139                 if ((err = vx_wait_for_rx_full(chip)) < 0) {
140                         snd_printd(KERN_DEBUG "transfer_end: error in rx_full\n");
141                         return err;
142                 }
143                 err = vx_inb(chip, RXH) << 16;
144                 err |= vx_inb(chip, RXM) << 8;
145                 err |= vx_inb(chip, RXL);
146                 snd_printd(KERN_DEBUG "transfer_end: error = 0x%x\n", err);
147                 return -(VX_ERR_MASK | err);
148         }
149         return 0;
150 }
151
152 /*
153  * vx_read_status - return the status rmh
154  * @rmh: rmh record to store the status
155  *
156  * returns 0 if successful, or a negative error code.
157  * the error code can be VX-specific, retrieved via vx_get_error().
158  * NB: call with spinlock held!
159  */
160 static int vx_read_status(struct vx_core *chip, struct vx_rmh *rmh)
161 {
162         int i, err, val, size;
163
164         /* no read necessary? */
165         if (rmh->DspStat == RMH_SSIZE_FIXED && rmh->LgStat == 0)
166                 return 0;
167
168         /* Wait for RX full (with timeout protection)
169          * The first word of status is in RX
170          */
171         err = vx_wait_for_rx_full(chip);
172         if (err < 0)
173                 return err;
174
175         /* Read RX */
176         val = vx_inb(chip, RXH) << 16;
177         val |= vx_inb(chip, RXM) << 8;
178         val |= vx_inb(chip, RXL);
179
180         /* If status given by DSP, let's decode its size */
181         switch (rmh->DspStat) {
182         case RMH_SSIZE_ARG:
183                 size = val & 0xff;
184                 rmh->Stat[0] = val & 0xffff00;
185                 rmh->LgStat = size + 1;
186                 break;
187         case RMH_SSIZE_MASK:
188                 /* Let's count the arg numbers from a mask */
189                 rmh->Stat[0] = val;
190                 size = 0;
191                 while (val) {
192                         if (val & 0x01)
193                                 size++;
194                         val >>= 1;
195                 }
196                 rmh->LgStat = size + 1;
197                 break;
198         default:
199                 /* else retrieve the status length given by the driver */
200                 size = rmh->LgStat;
201                 rmh->Stat[0] = val;  /* Val is the status 1st word */
202                 size--;              /* hence adjust remaining length */
203                 break;
204         }
205
206         if (size < 1)
207                 return 0;
208         snd_assert(size <= SIZE_MAX_STATUS, return -EINVAL);
209
210         for (i = 1; i <= size; i++) {
211                 /* trigger an irq MESS_WRITE_NEXT */
212                 err = vx_send_irq_dsp(chip, IRQ_MESS_WRITE_NEXT);
213                 if (err < 0)
214                         return err;
215                 /* Wait for RX full (with timeout protection) */
216                 err = vx_wait_for_rx_full(chip);
217                 if (err < 0)
218                         return err;
219                 rmh->Stat[i] = vx_inb(chip, RXH) << 16;
220                 rmh->Stat[i] |= vx_inb(chip, RXM) <<  8;
221                 rmh->Stat[i] |= vx_inb(chip, RXL);
222         }
223
224         return vx_transfer_end(chip, IRQ_MESS_WRITE_END);
225 }
226
227
228 #define MASK_MORE_THAN_1_WORD_COMMAND   0x00008000
229 #define MASK_1_WORD_COMMAND             0x00ff7fff
230
231 /*
232  * vx_send_msg_nolock - send a DSP message and read back the status
233  * @rmh: the rmh record to send and receive
234  *
235  * returns 0 if successful, or a negative error code.
236  * the error code can be VX-specific, retrieved via vx_get_error().
237  * 
238  * this function doesn't call spinlock at all.
239  */
240 int vx_send_msg_nolock(struct vx_core *chip, struct vx_rmh *rmh)
241 {
242         int i, err;
243         
244         if (chip->chip_status & VX_STAT_IS_STALE)
245                 return -EBUSY;
246
247         if ((err = vx_reset_chk(chip)) < 0) {
248                 snd_printd(KERN_DEBUG "vx_send_msg: vx_reset_chk error\n");
249                 return err;
250         }
251
252 #if 0
253         printk(KERN_DEBUG "rmh: cmd = 0x%06x, length = %d, stype = %d\n",
254                rmh->Cmd[0], rmh->LgCmd, rmh->DspStat);
255         if (rmh->LgCmd > 1) {
256                 printk(KERN_DEBUG "  ");
257                 for (i = 1; i < rmh->LgCmd; i++)
258                         printk("0x%06x ", rmh->Cmd[i]);
259                 printk("\n");
260         }
261 #endif
262         /* Check bit M is set according to length of the command */
263         if (rmh->LgCmd > 1)
264                 rmh->Cmd[0] |= MASK_MORE_THAN_1_WORD_COMMAND;
265         else
266                 rmh->Cmd[0] &= MASK_1_WORD_COMMAND;
267
268         /* Wait for TX empty */
269         if ((err = vx_wait_isr_bit(chip, ISR_TX_EMPTY)) < 0) {
270                 snd_printd(KERN_DEBUG "vx_send_msg: wait tx empty error\n");
271                 return err;
272         }
273
274         /* Write Cmd[0] */
275         vx_outb(chip, TXH, (rmh->Cmd[0] >> 16) & 0xff);
276         vx_outb(chip, TXM, (rmh->Cmd[0] >> 8) & 0xff);
277         vx_outb(chip, TXL, rmh->Cmd[0] & 0xff);
278
279         /* Trigger irq MESSAGE */
280         if ((err = vx_send_irq_dsp(chip, IRQ_MESSAGE)) < 0) {
281                 snd_printd(KERN_DEBUG "vx_send_msg: send IRQ_MESSAGE error\n");
282                 return err;
283         }
284
285         /* Wait for CHK = 1 */
286         if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
287                 return err;
288
289         /* If error, get error value from RX */
290         if (vx_inb(chip, ISR) & ISR_ERR) {
291                 if ((err = vx_wait_for_rx_full(chip)) < 0) {
292                         snd_printd(KERN_DEBUG "vx_send_msg: rx_full read error\n");
293                         return err;
294                 }
295                 err = vx_inb(chip, RXH) << 16;
296                 err |= vx_inb(chip, RXM) << 8;
297                 err |= vx_inb(chip, RXL);
298                 snd_printd(KERN_DEBUG "msg got error = 0x%x at cmd[0]\n", err);
299                 err = -(VX_ERR_MASK | err);
300                 return err;
301         }
302
303         /* Send the other words */
304         if (rmh->LgCmd > 1) {
305                 for (i = 1; i < rmh->LgCmd; i++) {
306                         /* Wait for TX ready */
307                         if ((err = vx_wait_isr_bit(chip, ISR_TX_READY)) < 0) {
308                                 snd_printd(KERN_DEBUG "vx_send_msg: tx_ready error\n");
309                                 return err;
310                         }
311
312                         /* Write Cmd[i] */
313                         vx_outb(chip, TXH, (rmh->Cmd[i] >> 16) & 0xff);
314                         vx_outb(chip, TXM, (rmh->Cmd[i] >> 8) & 0xff);
315                         vx_outb(chip, TXL, rmh->Cmd[i] & 0xff);
316
317                         /* Trigger irq MESS_READ_NEXT */
318                         if ((err = vx_send_irq_dsp(chip, IRQ_MESS_READ_NEXT)) < 0) {
319                                 snd_printd(KERN_DEBUG "vx_send_msg: IRQ_READ_NEXT error\n");
320                                 return err;
321                         }
322                 }
323                 /* Wait for TX empty */
324                 if ((err = vx_wait_isr_bit(chip, ISR_TX_READY)) < 0) {
325                         snd_printd(KERN_DEBUG "vx_send_msg: TX_READY error\n");
326                         return err;
327                 }
328                 /* End of transfer */
329                 err = vx_transfer_end(chip, IRQ_MESS_READ_END);
330                 if (err < 0)
331                         return err;
332         }
333
334         return vx_read_status(chip, rmh);
335 }
336
337
338 /*
339  * vx_send_msg - send a DSP message with spinlock
340  * @rmh: the rmh record to send and receive
341  *
342  * returns 0 if successful, or a negative error code.
343  * see vx_send_msg_nolock().
344  */
345 int vx_send_msg(struct vx_core *chip, struct vx_rmh *rmh)
346 {
347         unsigned long flags;
348         int err;
349
350         spin_lock_irqsave(&chip->lock, flags);
351         err = vx_send_msg_nolock(chip, rmh);
352         spin_unlock_irqrestore(&chip->lock, flags);
353         return err;
354 }
355
356
357 /*
358  * vx_send_rih_nolock - send an RIH to xilinx
359  * @cmd: the command to send
360  *
361  * returns 0 if successful, or a negative error code.
362  * the error code can be VX-specific, retrieved via vx_get_error().
363  *
364  * this function doesn't call spinlock at all.
365  *
366  * unlike RMH, no command is sent to DSP.
367  */
368 int vx_send_rih_nolock(struct vx_core *chip, int cmd)
369 {
370         int err;
371
372         if (chip->chip_status & VX_STAT_IS_STALE)
373                 return -EBUSY;
374
375 #if 0
376         printk(KERN_DEBUG "send_rih: cmd = 0x%x\n", cmd);
377 #endif
378         if ((err = vx_reset_chk(chip)) < 0)
379                 return err;
380         /* send the IRQ */
381         if ((err = vx_send_irq_dsp(chip, cmd)) < 0)
382                 return err;
383         /* Wait CHK = 1 */
384         if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
385                 return err;
386         /* If error, read RX */
387         if (vx_inb(chip, ISR) & ISR_ERR) {
388                 if ((err = vx_wait_for_rx_full(chip)) < 0)
389                         return err;
390                 err = vx_inb(chip, RXH) << 16;
391                 err |= vx_inb(chip, RXM) << 8;
392                 err |= vx_inb(chip, RXL);
393                 return -(VX_ERR_MASK | err);
394         }
395         return 0;
396 }
397
398
399 /*
400  * vx_send_rih - send an RIH with spinlock
401  * @cmd: the command to send
402  *
403  * see vx_send_rih_nolock().
404  */
405 int vx_send_rih(struct vx_core *chip, int cmd)
406 {
407         unsigned long flags;
408         int err;
409
410         spin_lock_irqsave(&chip->lock, flags);
411         err = vx_send_rih_nolock(chip, cmd);
412         spin_unlock_irqrestore(&chip->lock, flags);
413         return err;
414 }
415
416 #define END_OF_RESET_WAIT_TIME          500     /* us */
417
418 /**
419  * snd_vx_boot_xilinx - boot up the xilinx interface
420  * @boot: the boot record to load
421  */
422 int snd_vx_load_boot_image(struct vx_core *chip, const struct firmware *boot)
423 {
424         unsigned int i;
425         int no_fillup = vx_has_new_dsp(chip);
426
427         /* check the length of boot image */
428         snd_assert(boot->size > 0, return -EINVAL);
429         snd_assert(boot->size % 3 == 0, return -EINVAL);
430 #if 0
431         {
432                 /* more strict check */
433                 unsigned int c = ((u32)boot->data[0] << 16) | ((u32)boot->data[1] << 8) | boot->data[2];
434                 snd_assert(boot->size == (c + 2) * 3, return -EINVAL);
435         }
436 #endif
437
438         /* reset dsp */
439         vx_reset_dsp(chip);
440         
441         udelay(END_OF_RESET_WAIT_TIME); /* another wait? */
442
443         /* download boot strap */
444         for (i = 0; i < 0x600; i += 3) {
445                 if (i >= boot->size) {
446                         if (no_fillup)
447                                 break;
448                         if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
449                                 snd_printk(KERN_ERR "dsp boot failed at %d\n", i);
450                                 return -EIO;
451                         }
452                         vx_outb(chip, TXH, 0);
453                         vx_outb(chip, TXM, 0);
454                         vx_outb(chip, TXL, 0);
455                 } else {
456                         const unsigned char *image = boot->data + i;
457                         if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
458                                 snd_printk(KERN_ERR "dsp boot failed at %d\n", i);
459                                 return -EIO;
460                         }
461                         vx_outb(chip, TXH, image[0]);
462                         vx_outb(chip, TXM, image[1]);
463                         vx_outb(chip, TXL, image[2]);
464                 }
465         }
466         return 0;
467 }
468
469 EXPORT_SYMBOL(snd_vx_load_boot_image);
470
471 /*
472  * vx_test_irq_src - query the source of interrupts
473  *
474  * called from irq handler only
475  */
476 static int vx_test_irq_src(struct vx_core *chip, unsigned int *ret)
477 {
478         int err;
479
480         vx_init_rmh(&chip->irq_rmh, CMD_TEST_IT);
481         spin_lock(&chip->lock);
482         err = vx_send_msg_nolock(chip, &chip->irq_rmh);
483         if (err < 0)
484                 *ret = 0;
485         else
486                 *ret = chip->irq_rmh.Stat[0];
487         spin_unlock(&chip->lock);
488         return err;
489 }
490
491
492 /*
493  * vx_interrupt - soft irq handler
494  */
495 static void vx_interrupt(unsigned long private_data)
496 {
497         struct vx_core *chip = (struct vx_core *) private_data;
498         unsigned int events;
499                 
500         if (chip->chip_status & VX_STAT_IS_STALE)
501                 return;
502
503         if (vx_test_irq_src(chip, &events) < 0)
504                 return;
505     
506 #if 0
507         if (events & 0x000800)
508                 printk(KERN_ERR "DSP Stream underrun ! IRQ events = 0x%x\n", events);
509 #endif
510         // printk(KERN_DEBUG "IRQ events = 0x%x\n", events);
511
512         /* We must prevent any application using this DSP
513          * and block any further request until the application
514          * either unregisters or reloads the DSP
515          */
516         if (events & FATAL_DSP_ERROR) {
517                 snd_printk(KERN_ERR "vx_core: fatal DSP error!!\n");
518                 return;
519         }
520
521         /* The start on time code conditions are filled (ie the time code
522          * received by the board is equal to one of those given to it).
523          */
524         if (events & TIME_CODE_EVENT_PENDING)
525                 ; /* so far, nothing to do yet */
526
527         /* The frequency has changed on the board (UER mode). */
528         if (events & FREQUENCY_CHANGE_EVENT_PENDING)
529                 vx_change_frequency(chip);
530
531         /* update the pcm streams */
532         vx_pcm_update_intr(chip, events);
533 }
534
535
536 /**
537  * snd_vx_irq_handler - interrupt handler
538  */
539 irqreturn_t snd_vx_irq_handler(int irq, void *dev)
540 {
541         struct vx_core *chip = dev;
542
543         if (! (chip->chip_status & VX_STAT_CHIP_INIT) ||
544             (chip->chip_status & VX_STAT_IS_STALE))
545                 return IRQ_NONE;
546         if (! vx_test_and_ack(chip))
547                 tasklet_hi_schedule(&chip->tq);
548         return IRQ_HANDLED;
549 }
550
551 EXPORT_SYMBOL(snd_vx_irq_handler);
552
553 /*
554  */
555 static void vx_reset_board(struct vx_core *chip, int cold_reset)
556 {
557         snd_assert(chip->ops->reset_board, return);
558
559         /* current source, later sync'ed with target */
560         chip->audio_source = VX_AUDIO_SRC_LINE;
561         if (cold_reset) {
562                 chip->audio_source_target = chip->audio_source;
563                 chip->clock_source = INTERNAL_QUARTZ;
564                 chip->clock_mode = VX_CLOCK_MODE_AUTO;
565                 chip->freq = 48000;
566                 chip->uer_detected = VX_UER_MODE_NOT_PRESENT;
567                 chip->uer_bits = SNDRV_PCM_DEFAULT_CON_SPDIF;
568         }
569
570         chip->ops->reset_board(chip, cold_reset);
571
572         vx_reset_codec(chip, cold_reset);
573
574         vx_set_internal_clock(chip, chip->freq);
575
576         /* Reset the DSP */
577         vx_reset_dsp(chip);
578
579         if (vx_is_pcmcia(chip)) {
580                 /* Acknowledge any pending IRQ and reset the MEMIRQ flag. */
581                 vx_test_and_ack(chip);
582                 vx_validate_irq(chip, 1);
583         }
584
585         /* init CBits */
586         vx_set_iec958_status(chip, chip->uer_bits);
587 }
588
589
590 /*
591  * proc interface
592  */
593
594 static void vx_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
595 {
596         struct vx_core *chip = entry->private_data;
597         static char *audio_src_vxp[] = { "Line", "Mic", "Digital" };
598         static char *audio_src_vx2[] = { "Analog", "Analog", "Digital" };
599         static char *clock_mode[] = { "Auto", "Internal", "External" };
600         static char *clock_src[] = { "Internal", "External" };
601         static char *uer_type[] = { "Consumer", "Professional", "Not Present" };
602         
603         snd_iprintf(buffer, "%s\n", chip->card->longname);
604         snd_iprintf(buffer, "Xilinx Firmware: %s\n",
605                     chip->chip_status & VX_STAT_XILINX_LOADED ? "Loaded" : "No");
606         snd_iprintf(buffer, "Device Initialized: %s\n",
607                     chip->chip_status & VX_STAT_DEVICE_INIT ? "Yes" : "No");
608         snd_iprintf(buffer, "DSP audio info:");
609         if (chip->audio_info & VX_AUDIO_INFO_REAL_TIME)
610                 snd_iprintf(buffer, " realtime");
611         if (chip->audio_info & VX_AUDIO_INFO_OFFLINE)
612                 snd_iprintf(buffer, " offline");
613         if (chip->audio_info & VX_AUDIO_INFO_MPEG1)
614                 snd_iprintf(buffer, " mpeg1");
615         if (chip->audio_info & VX_AUDIO_INFO_MPEG2)
616                 snd_iprintf(buffer, " mpeg2");
617         if (chip->audio_info & VX_AUDIO_INFO_LINEAR_8)
618                 snd_iprintf(buffer, " linear8");
619         if (chip->audio_info & VX_AUDIO_INFO_LINEAR_16)
620                 snd_iprintf(buffer, " linear16");
621         if (chip->audio_info & VX_AUDIO_INFO_LINEAR_24)
622                 snd_iprintf(buffer, " linear24");
623         snd_iprintf(buffer, "\n");
624         snd_iprintf(buffer, "Input Source: %s\n", vx_is_pcmcia(chip) ?
625                     audio_src_vxp[chip->audio_source] :
626                     audio_src_vx2[chip->audio_source]);
627         snd_iprintf(buffer, "Clock Mode: %s\n", clock_mode[chip->clock_mode]);
628         snd_iprintf(buffer, "Clock Source: %s\n", clock_src[chip->clock_source]);
629         snd_iprintf(buffer, "Frequency: %d\n", chip->freq);
630         snd_iprintf(buffer, "Detected Frequency: %d\n", chip->freq_detected);
631         snd_iprintf(buffer, "Detected UER type: %s\n", uer_type[chip->uer_detected]);
632         snd_iprintf(buffer, "Min/Max/Cur IBL: %d/%d/%d (granularity=%d)\n",
633                     chip->ibl.min_size, chip->ibl.max_size, chip->ibl.size,
634                     chip->ibl.granularity);
635 }
636
637 static void vx_proc_init(struct vx_core *chip)
638 {
639         struct snd_info_entry *entry;
640
641         if (! snd_card_proc_new(chip->card, "vx-status", &entry))
642                 snd_info_set_text_ops(entry, chip, vx_proc_read);
643 }
644
645
646 /**
647  * snd_vx_dsp_boot - load the DSP boot
648  */
649 int snd_vx_dsp_boot(struct vx_core *chip, const struct firmware *boot)
650 {
651         int err;
652         int cold_reset = !(chip->chip_status & VX_STAT_DEVICE_INIT);
653
654         vx_reset_board(chip, cold_reset);
655         vx_validate_irq(chip, 0);
656
657         if ((err = snd_vx_load_boot_image(chip, boot)) < 0)
658                 return err;
659         msleep(10);
660
661         return 0;
662 }
663
664 EXPORT_SYMBOL(snd_vx_dsp_boot);
665
666 /**
667  * snd_vx_dsp_load - load the DSP image
668  */
669 int snd_vx_dsp_load(struct vx_core *chip, const struct firmware *dsp)
670 {
671         unsigned int i;
672         int err;
673         unsigned int csum = 0;
674         const unsigned char *image, *cptr;
675
676         snd_assert(dsp->size % 3 == 0, return -EINVAL);
677
678         vx_toggle_dac_mute(chip, 1);
679
680         /* Transfert data buffer from PC to DSP */
681         for (i = 0; i < dsp->size; i += 3) {
682                 image = dsp->data + i;
683                 /* Wait DSP ready for a new read */
684                 if ((err = vx_wait_isr_bit(chip, ISR_TX_EMPTY)) < 0) {
685                         printk("dsp loading error at position %d\n", i);
686                         return err;
687                 }
688                 cptr = image;
689                 csum ^= *cptr;
690                 csum = (csum >> 24) | (csum << 8);
691                 vx_outb(chip, TXH, *cptr++);
692                 csum ^= *cptr;
693                 csum = (csum >> 24) | (csum << 8);
694                 vx_outb(chip, TXM, *cptr++);
695                 csum ^= *cptr;
696                 csum = (csum >> 24) | (csum << 8);
697                 vx_outb(chip, TXL, *cptr++);
698         }
699         snd_printdd(KERN_DEBUG "checksum = 0x%08x\n", csum);
700
701         msleep(200);
702
703         if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
704                 return err;
705
706         vx_toggle_dac_mute(chip, 0);
707
708         vx_test_and_ack(chip);
709         vx_validate_irq(chip, 1);
710
711         return 0;
712 }
713
714 EXPORT_SYMBOL(snd_vx_dsp_load);
715
716 #ifdef CONFIG_PM
717 /*
718  * suspend
719  */
720 int snd_vx_suspend(struct vx_core *chip, pm_message_t state)
721 {
722         unsigned int i;
723
724         snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
725         chip->chip_status |= VX_STAT_IN_SUSPEND;
726         for (i = 0; i < chip->hw->num_codecs; i++)
727                 snd_pcm_suspend_all(chip->pcm[i]);
728
729         return 0;
730 }
731
732 EXPORT_SYMBOL(snd_vx_suspend);
733
734 /*
735  * resume
736  */
737 int snd_vx_resume(struct vx_core *chip)
738 {
739         int i, err;
740
741         chip->chip_status &= ~VX_STAT_CHIP_INIT;
742
743         for (i = 0; i < 4; i++) {
744                 if (! chip->firmware[i])
745                         continue;
746                 err = chip->ops->load_dsp(chip, i, chip->firmware[i]);
747                 if (err < 0) {
748                         snd_printk(KERN_ERR "vx: firmware resume error at DSP %d\n", i);
749                         return -EIO;
750                 }
751         }
752
753         chip->chip_status |= VX_STAT_CHIP_INIT;
754         chip->chip_status &= ~VX_STAT_IN_SUSPEND;
755
756         snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
757         return 0;
758 }
759
760 EXPORT_SYMBOL(snd_vx_resume);
761 #endif
762
763 /**
764  * snd_vx_create - constructor for struct vx_core
765  * @hw: hardware specific record
766  *
767  * this function allocates the instance and prepare for the hardware
768  * initialization.
769  *
770  * return the instance pointer if successful, NULL in error.
771  */
772 struct vx_core *snd_vx_create(struct snd_card *card, struct snd_vx_hardware *hw,
773                               struct snd_vx_ops *ops,
774                               int extra_size)
775 {
776         struct vx_core *chip;
777
778         snd_assert(card && hw && ops, return NULL);
779
780         chip = kzalloc(sizeof(*chip) + extra_size, GFP_KERNEL);
781         if (! chip) {
782                 snd_printk(KERN_ERR "vx_core: no memory\n");
783                 return NULL;
784         }
785         spin_lock_init(&chip->lock);
786         spin_lock_init(&chip->irq_lock);
787         chip->irq = -1;
788         chip->hw = hw;
789         chip->type = hw->type;
790         chip->ops = ops;
791         tasklet_init(&chip->tq, vx_interrupt, (unsigned long)chip);
792         mutex_init(&chip->mixer_mutex);
793
794         chip->card = card;
795         card->private_data = chip;
796         strcpy(card->driver, hw->name);
797         sprintf(card->shortname, "Digigram %s", hw->name);
798
799         vx_proc_init(chip);
800
801         return chip;
802 }
803
804 EXPORT_SYMBOL(snd_vx_create);
805
806 /*
807  * module entries
808  */
809 static int __init alsa_vx_core_init(void)
810 {
811         return 0;
812 }
813
814 static void __exit alsa_vx_core_exit(void)
815 {
816 }
817
818 module_init(alsa_vx_core_init)
819 module_exit(alsa_vx_core_exit)