]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - sound/drivers/vx/vx_core.c
[ECONET]: Convert away from SOCKOPS_WRAPPED
[linux-2.6.git] / sound / drivers / vx / vx_core.c
1 /*
2  * Driver for Digigram VX soundcards
3  *
4  * Hardware core part
5  *
6  * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
7  *
8  *   This program is free software; you can redistribute it and/or modify
9  *   it under the terms of the GNU General Public License as published by
10  *   the Free Software Foundation; either version 2 of the License, or
11  *   (at your option) any later version.
12  *
13  *   This program is distributed in the hope that it will be useful,
14  *   but WITHOUT ANY WARRANTY; without even the implied warranty of
15  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  *   GNU General Public License for more details.
17  *
18  *   You should have received a copy of the GNU General Public License
19  *   along with this program; if not, write to the Free Software
20  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
21  */
22
23 #include <sound/driver.h>
24 #include <linux/delay.h>
25 #include <linux/slab.h>
26 #include <linux/interrupt.h>
27 #include <linux/init.h>
28 #include <linux/device.h>
29 #include <linux/firmware.h>
30 #include <sound/core.h>
31 #include <sound/pcm.h>
32 #include <sound/asoundef.h>
33 #include <sound/info.h>
34 #include <asm/io.h>
35 #include <sound/vx_core.h>
36 #include "vx_cmd.h"
37
38 MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
39 MODULE_DESCRIPTION("Common routines for Digigram VX drivers");
40 MODULE_LICENSE("GPL");
41
42
43 /*
44  * vx_check_reg_bit - wait for the specified bit is set/reset on a register
45  * @reg: register to check
46  * @mask: bit mask
47  * @bit: resultant bit to be checked
48  * @time: time-out of loop in msec
49  *
50  * returns zero if a bit matches, or a negative error code.
51  */
52 int snd_vx_check_reg_bit(struct vx_core *chip, int reg, int mask, int bit, int time)
53 {
54         unsigned long end_time = jiffies + (time * HZ + 999) / 1000;
55 #ifdef CONFIG_SND_DEBUG
56         static char *reg_names[VX_REG_MAX] = {
57                 "ICR", "CVR", "ISR", "IVR", "RXH", "RXM", "RXL",
58                 "DMA", "CDSP", "RFREQ", "RUER/V2", "DATA", "MEMIRQ",
59                 "ACQ", "BIT0", "BIT1", "MIC0", "MIC1", "MIC2",
60                 "MIC3", "INTCSR", "CNTRL", "GPIOC",
61                 "LOFREQ", "HIFREQ", "CSUER", "RUER"
62         };
63 #endif
64         do {
65                 if ((snd_vx_inb(chip, reg) & mask) == bit)
66                         return 0;
67                 //msleep(10);
68         } while (time_after_eq(end_time, jiffies));
69         snd_printd(KERN_DEBUG "vx_check_reg_bit: timeout, reg=%s, mask=0x%x, val=0x%x\n", reg_names[reg], mask, snd_vx_inb(chip, reg));
70         return -EIO;
71 }
72
73 /*
74  * vx_send_irq_dsp - set command irq bit
75  * @num: the requested IRQ type, IRQ_XXX
76  *
77  * this triggers the specified IRQ request
78  * returns 0 if successful, or a negative error code.
79  * 
80  */
81 static int vx_send_irq_dsp(struct vx_core *chip, int num)
82 {
83         int nirq;
84
85         /* wait for Hc = 0 */
86         if (snd_vx_check_reg_bit(chip, VX_CVR, CVR_HC, 0, 200) < 0)
87                 return -EIO;
88
89         nirq = num;
90         if (vx_has_new_dsp(chip))
91                 nirq += VXP_IRQ_OFFSET;
92         vx_outb(chip, CVR, (nirq >> 1) | CVR_HC);
93         return 0;
94 }
95
96
97 /*
98  * vx_reset_chk - reset CHK bit on ISR
99  *
100  * returns 0 if successful, or a negative error code.
101  */
102 static int vx_reset_chk(struct vx_core *chip)
103 {
104         /* Reset irq CHK */
105         if (vx_send_irq_dsp(chip, IRQ_RESET_CHK) < 0)
106                 return -EIO;
107         /* Wait until CHK = 0 */
108         if (vx_check_isr(chip, ISR_CHK, 0, 200) < 0)
109                 return -EIO;
110         return 0;
111 }
112
113 /*
114  * vx_transfer_end - terminate message transfer
115  * @cmd: IRQ message to send (IRQ_MESS_XXX_END)
116  *
117  * returns 0 if successful, or a negative error code.
118  * the error code can be VX-specific, retrieved via vx_get_error().
119  * NB: call with spinlock held!
120  */
121 static int vx_transfer_end(struct vx_core *chip, int cmd)
122 {
123         int err;
124
125         if ((err = vx_reset_chk(chip)) < 0)
126                 return err;
127
128         /* irq MESS_READ/WRITE_END */
129         if ((err = vx_send_irq_dsp(chip, cmd)) < 0)
130                 return err;
131
132         /* Wait CHK = 1 */
133         if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
134                 return err;
135
136         /* If error, Read RX */
137         if ((err = vx_inb(chip, ISR)) & ISR_ERR) {
138                 if ((err = vx_wait_for_rx_full(chip)) < 0) {
139                         snd_printd(KERN_DEBUG "transfer_end: error in rx_full\n");
140                         return err;
141                 }
142                 err = vx_inb(chip, RXH) << 16;
143                 err |= vx_inb(chip, RXM) << 8;
144                 err |= vx_inb(chip, RXL);
145                 snd_printd(KERN_DEBUG "transfer_end: error = 0x%x\n", err);
146                 return -(VX_ERR_MASK | err);
147         }
148         return 0;
149 }
150
151 /*
152  * vx_read_status - return the status rmh
153  * @rmh: rmh record to store the status
154  *
155  * returns 0 if successful, or a negative error code.
156  * the error code can be VX-specific, retrieved via vx_get_error().
157  * NB: call with spinlock held!
158  */
159 static int vx_read_status(struct vx_core *chip, struct vx_rmh *rmh)
160 {
161         int i, err, val, size;
162
163         /* no read necessary? */
164         if (rmh->DspStat == RMH_SSIZE_FIXED && rmh->LgStat == 0)
165                 return 0;
166
167         /* Wait for RX full (with timeout protection)
168          * The first word of status is in RX
169          */
170         err = vx_wait_for_rx_full(chip);
171         if (err < 0)
172                 return err;
173
174         /* Read RX */
175         val = vx_inb(chip, RXH) << 16;
176         val |= vx_inb(chip, RXM) << 8;
177         val |= vx_inb(chip, RXL);
178
179         /* If status given by DSP, let's decode its size */
180         switch (rmh->DspStat) {
181         case RMH_SSIZE_ARG:
182                 size = val & 0xff;
183                 rmh->Stat[0] = val & 0xffff00;
184                 rmh->LgStat = size + 1;
185                 break;
186         case RMH_SSIZE_MASK:
187                 /* Let's count the arg numbers from a mask */
188                 rmh->Stat[0] = val;
189                 size = 0;
190                 while (val) {
191                         if (val & 0x01)
192                                 size++;
193                         val >>= 1;
194                 }
195                 rmh->LgStat = size + 1;
196                 break;
197         default:
198                 /* else retrieve the status length given by the driver */
199                 size = rmh->LgStat;
200                 rmh->Stat[0] = val;  /* Val is the status 1st word */
201                 size--;              /* hence adjust remaining length */
202                 break;
203         }
204
205         if (size < 1)
206                 return 0;
207         snd_assert(size <= SIZE_MAX_STATUS, return -EINVAL);
208
209         for (i = 1; i <= size; i++) {
210                 /* trigger an irq MESS_WRITE_NEXT */
211                 err = vx_send_irq_dsp(chip, IRQ_MESS_WRITE_NEXT);
212                 if (err < 0)
213                         return err;
214                 /* Wait for RX full (with timeout protection) */
215                 err = vx_wait_for_rx_full(chip);
216                 if (err < 0)
217                         return err;
218                 rmh->Stat[i] = vx_inb(chip, RXH) << 16;
219                 rmh->Stat[i] |= vx_inb(chip, RXM) <<  8;
220                 rmh->Stat[i] |= vx_inb(chip, RXL);
221         }
222
223         return vx_transfer_end(chip, IRQ_MESS_WRITE_END);
224 }
225
226
227 #define MASK_MORE_THAN_1_WORD_COMMAND   0x00008000
228 #define MASK_1_WORD_COMMAND             0x00ff7fff
229
230 /*
231  * vx_send_msg_nolock - send a DSP message and read back the status
232  * @rmh: the rmh record to send and receive
233  *
234  * returns 0 if successful, or a negative error code.
235  * the error code can be VX-specific, retrieved via vx_get_error().
236  * 
237  * this function doesn't call spinlock at all.
238  */
239 int vx_send_msg_nolock(struct vx_core *chip, struct vx_rmh *rmh)
240 {
241         int i, err;
242         
243         if (chip->chip_status & VX_STAT_IS_STALE)
244                 return -EBUSY;
245
246         if ((err = vx_reset_chk(chip)) < 0) {
247                 snd_printd(KERN_DEBUG "vx_send_msg: vx_reset_chk error\n");
248                 return err;
249         }
250
251 #if 0
252         printk(KERN_DEBUG "rmh: cmd = 0x%06x, length = %d, stype = %d\n",
253                rmh->Cmd[0], rmh->LgCmd, rmh->DspStat);
254         if (rmh->LgCmd > 1) {
255                 printk(KERN_DEBUG "  ");
256                 for (i = 1; i < rmh->LgCmd; i++)
257                         printk("0x%06x ", rmh->Cmd[i]);
258                 printk("\n");
259         }
260 #endif
261         /* Check bit M is set according to length of the command */
262         if (rmh->LgCmd > 1)
263                 rmh->Cmd[0] |= MASK_MORE_THAN_1_WORD_COMMAND;
264         else
265                 rmh->Cmd[0] &= MASK_1_WORD_COMMAND;
266
267         /* Wait for TX empty */
268         if ((err = vx_wait_isr_bit(chip, ISR_TX_EMPTY)) < 0) {
269                 snd_printd(KERN_DEBUG "vx_send_msg: wait tx empty error\n");
270                 return err;
271         }
272
273         /* Write Cmd[0] */
274         vx_outb(chip, TXH, (rmh->Cmd[0] >> 16) & 0xff);
275         vx_outb(chip, TXM, (rmh->Cmd[0] >> 8) & 0xff);
276         vx_outb(chip, TXL, rmh->Cmd[0] & 0xff);
277
278         /* Trigger irq MESSAGE */
279         if ((err = vx_send_irq_dsp(chip, IRQ_MESSAGE)) < 0) {
280                 snd_printd(KERN_DEBUG "vx_send_msg: send IRQ_MESSAGE error\n");
281                 return err;
282         }
283
284         /* Wait for CHK = 1 */
285         if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
286                 return err;
287
288         /* If error, get error value from RX */
289         if (vx_inb(chip, ISR) & ISR_ERR) {
290                 if ((err = vx_wait_for_rx_full(chip)) < 0) {
291                         snd_printd(KERN_DEBUG "vx_send_msg: rx_full read error\n");
292                         return err;
293                 }
294                 err = vx_inb(chip, RXH) << 16;
295                 err |= vx_inb(chip, RXM) << 8;
296                 err |= vx_inb(chip, RXL);
297                 snd_printd(KERN_DEBUG "msg got error = 0x%x at cmd[0]\n", err);
298                 err = -(VX_ERR_MASK | err);
299                 return err;
300         }
301
302         /* Send the other words */
303         if (rmh->LgCmd > 1) {
304                 for (i = 1; i < rmh->LgCmd; i++) {
305                         /* Wait for TX ready */
306                         if ((err = vx_wait_isr_bit(chip, ISR_TX_READY)) < 0) {
307                                 snd_printd(KERN_DEBUG "vx_send_msg: tx_ready error\n");
308                                 return err;
309                         }
310
311                         /* Write Cmd[i] */
312                         vx_outb(chip, TXH, (rmh->Cmd[i] >> 16) & 0xff);
313                         vx_outb(chip, TXM, (rmh->Cmd[i] >> 8) & 0xff);
314                         vx_outb(chip, TXL, rmh->Cmd[i] & 0xff);
315
316                         /* Trigger irq MESS_READ_NEXT */
317                         if ((err = vx_send_irq_dsp(chip, IRQ_MESS_READ_NEXT)) < 0) {
318                                 snd_printd(KERN_DEBUG "vx_send_msg: IRQ_READ_NEXT error\n");
319                                 return err;
320                         }
321                 }
322                 /* Wait for TX empty */
323                 if ((err = vx_wait_isr_bit(chip, ISR_TX_READY)) < 0) {
324                         snd_printd(KERN_DEBUG "vx_send_msg: TX_READY error\n");
325                         return err;
326                 }
327                 /* End of transfer */
328                 err = vx_transfer_end(chip, IRQ_MESS_READ_END);
329                 if (err < 0)
330                         return err;
331         }
332
333         return vx_read_status(chip, rmh);
334 }
335
336
337 /*
338  * vx_send_msg - send a DSP message with spinlock
339  * @rmh: the rmh record to send and receive
340  *
341  * returns 0 if successful, or a negative error code.
342  * see vx_send_msg_nolock().
343  */
344 int vx_send_msg(struct vx_core *chip, struct vx_rmh *rmh)
345 {
346         unsigned long flags;
347         int err;
348
349         spin_lock_irqsave(&chip->lock, flags);
350         err = vx_send_msg_nolock(chip, rmh);
351         spin_unlock_irqrestore(&chip->lock, flags);
352         return err;
353 }
354
355
356 /*
357  * vx_send_rih_nolock - send an RIH to xilinx
358  * @cmd: the command to send
359  *
360  * returns 0 if successful, or a negative error code.
361  * the error code can be VX-specific, retrieved via vx_get_error().
362  *
363  * this function doesn't call spinlock at all.
364  *
365  * unlike RMH, no command is sent to DSP.
366  */
367 int vx_send_rih_nolock(struct vx_core *chip, int cmd)
368 {
369         int err;
370
371         if (chip->chip_status & VX_STAT_IS_STALE)
372                 return -EBUSY;
373
374 #if 0
375         printk(KERN_DEBUG "send_rih: cmd = 0x%x\n", cmd);
376 #endif
377         if ((err = vx_reset_chk(chip)) < 0)
378                 return err;
379         /* send the IRQ */
380         if ((err = vx_send_irq_dsp(chip, cmd)) < 0)
381                 return err;
382         /* Wait CHK = 1 */
383         if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
384                 return err;
385         /* If error, read RX */
386         if (vx_inb(chip, ISR) & ISR_ERR) {
387                 if ((err = vx_wait_for_rx_full(chip)) < 0)
388                         return err;
389                 err = vx_inb(chip, RXH) << 16;
390                 err |= vx_inb(chip, RXM) << 8;
391                 err |= vx_inb(chip, RXL);
392                 return -(VX_ERR_MASK | err);
393         }
394         return 0;
395 }
396
397
398 /*
399  * vx_send_rih - send an RIH with spinlock
400  * @cmd: the command to send
401  *
402  * see vx_send_rih_nolock().
403  */
404 int vx_send_rih(struct vx_core *chip, int cmd)
405 {
406         unsigned long flags;
407         int err;
408
409         spin_lock_irqsave(&chip->lock, flags);
410         err = vx_send_rih_nolock(chip, cmd);
411         spin_unlock_irqrestore(&chip->lock, flags);
412         return err;
413 }
414
415 #define END_OF_RESET_WAIT_TIME          500     /* us */
416
417 /**
418  * snd_vx_boot_xilinx - boot up the xilinx interface
419  * @boot: the boot record to load
420  */
421 int snd_vx_load_boot_image(struct vx_core *chip, const struct firmware *boot)
422 {
423         unsigned int i;
424         int no_fillup = vx_has_new_dsp(chip);
425
426         /* check the length of boot image */
427         snd_assert(boot->size > 0, return -EINVAL);
428         snd_assert(boot->size % 3 == 0, return -EINVAL);
429 #if 0
430         {
431                 /* more strict check */
432                 unsigned int c = ((u32)boot->data[0] << 16) | ((u32)boot->data[1] << 8) | boot->data[2];
433                 snd_assert(boot->size == (c + 2) * 3, return -EINVAL);
434         }
435 #endif
436
437         /* reset dsp */
438         vx_reset_dsp(chip);
439         
440         udelay(END_OF_RESET_WAIT_TIME); /* another wait? */
441
442         /* download boot strap */
443         for (i = 0; i < 0x600; i += 3) {
444                 if (i >= boot->size) {
445                         if (no_fillup)
446                                 break;
447                         if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
448                                 snd_printk(KERN_ERR "dsp boot failed at %d\n", i);
449                                 return -EIO;
450                         }
451                         vx_outb(chip, TXH, 0);
452                         vx_outb(chip, TXM, 0);
453                         vx_outb(chip, TXL, 0);
454                 } else {
455                         unsigned char *image = boot->data + i;
456                         if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
457                                 snd_printk(KERN_ERR "dsp boot failed at %d\n", i);
458                                 return -EIO;
459                         }
460                         vx_outb(chip, TXH, image[0]);
461                         vx_outb(chip, TXM, image[1]);
462                         vx_outb(chip, TXL, image[2]);
463                 }
464         }
465         return 0;
466 }
467
468 /*
469  * vx_test_irq_src - query the source of interrupts
470  *
471  * called from irq handler only
472  */
473 static int vx_test_irq_src(struct vx_core *chip, unsigned int *ret)
474 {
475         int err;
476
477         vx_init_rmh(&chip->irq_rmh, CMD_TEST_IT);
478         spin_lock(&chip->lock);
479         err = vx_send_msg_nolock(chip, &chip->irq_rmh);
480         if (err < 0)
481                 *ret = 0;
482         else
483                 *ret = chip->irq_rmh.Stat[0];
484         spin_unlock(&chip->lock);
485         return err;
486 }
487
488
489 /*
490  * vx_interrupt - soft irq handler
491  */
492 static void vx_interrupt(unsigned long private_data)
493 {
494         struct vx_core *chip = (struct vx_core *) private_data;
495         unsigned int events;
496                 
497         if (chip->chip_status & VX_STAT_IS_STALE)
498                 return;
499
500         if (vx_test_irq_src(chip, &events) < 0)
501                 return;
502     
503 #if 0
504         if (events & 0x000800)
505                 printk(KERN_ERR "DSP Stream underrun ! IRQ events = 0x%x\n", events);
506 #endif
507         // printk(KERN_DEBUG "IRQ events = 0x%x\n", events);
508
509         /* We must prevent any application using this DSP
510          * and block any further request until the application
511          * either unregisters or reloads the DSP
512          */
513         if (events & FATAL_DSP_ERROR) {
514                 snd_printk(KERN_ERR "vx_core: fatal DSP error!!\n");
515                 return;
516         }
517
518         /* The start on time code conditions are filled (ie the time code
519          * received by the board is equal to one of those given to it).
520          */
521         if (events & TIME_CODE_EVENT_PENDING)
522                 ; /* so far, nothing to do yet */
523
524         /* The frequency has changed on the board (UER mode). */
525         if (events & FREQUENCY_CHANGE_EVENT_PENDING)
526                 vx_change_frequency(chip);
527
528         /* update the pcm streams */
529         vx_pcm_update_intr(chip, events);
530 }
531
532
533 /**
534  * snd_vx_irq_handler - interrupt handler
535  */
536 irqreturn_t snd_vx_irq_handler(int irq, void *dev, struct pt_regs *regs)
537 {
538         struct vx_core *chip = dev;
539
540         if (! (chip->chip_status & VX_STAT_CHIP_INIT) ||
541             (chip->chip_status & VX_STAT_IS_STALE))
542                 return IRQ_NONE;
543         if (! vx_test_and_ack(chip))
544                 tasklet_hi_schedule(&chip->tq);
545         return IRQ_HANDLED;
546 }
547
548
549 /*
550  */
551 static void vx_reset_board(struct vx_core *chip, int cold_reset)
552 {
553         snd_assert(chip->ops->reset_board, return);
554
555         /* current source, later sync'ed with target */
556         chip->audio_source = VX_AUDIO_SRC_LINE;
557         if (cold_reset) {
558                 chip->audio_source_target = chip->audio_source;
559                 chip->clock_source = INTERNAL_QUARTZ;
560                 chip->clock_mode = VX_CLOCK_MODE_AUTO;
561                 chip->freq = 48000;
562                 chip->uer_detected = VX_UER_MODE_NOT_PRESENT;
563                 chip->uer_bits = SNDRV_PCM_DEFAULT_CON_SPDIF;
564         }
565
566         chip->ops->reset_board(chip, cold_reset);
567
568         vx_reset_codec(chip, cold_reset);
569
570         vx_set_internal_clock(chip, chip->freq);
571
572         /* Reset the DSP */
573         vx_reset_dsp(chip);
574
575         if (vx_is_pcmcia(chip)) {
576                 /* Acknowledge any pending IRQ and reset the MEMIRQ flag. */
577                 vx_test_and_ack(chip);
578                 vx_validate_irq(chip, 1);
579         }
580
581         /* init CBits */
582         vx_set_iec958_status(chip, chip->uer_bits);
583 }
584
585
586 /*
587  * proc interface
588  */
589
590 static void vx_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
591 {
592         struct vx_core *chip = entry->private_data;
593         static char *audio_src_vxp[] = { "Line", "Mic", "Digital" };
594         static char *audio_src_vx2[] = { "Analog", "Analog", "Digital" };
595         static char *clock_mode[] = { "Auto", "Internal", "External" };
596         static char *clock_src[] = { "Internal", "External" };
597         static char *uer_type[] = { "Consumer", "Professional", "Not Present" };
598         
599         snd_iprintf(buffer, "%s\n", chip->card->longname);
600         snd_iprintf(buffer, "Xilinx Firmware: %s\n",
601                     chip->chip_status & VX_STAT_XILINX_LOADED ? "Loaded" : "No");
602         snd_iprintf(buffer, "Device Initialized: %s\n",
603                     chip->chip_status & VX_STAT_DEVICE_INIT ? "Yes" : "No");
604         snd_iprintf(buffer, "DSP audio info:");
605         if (chip->audio_info & VX_AUDIO_INFO_REAL_TIME)
606                 snd_iprintf(buffer, " realtime");
607         if (chip->audio_info & VX_AUDIO_INFO_OFFLINE)
608                 snd_iprintf(buffer, " offline");
609         if (chip->audio_info & VX_AUDIO_INFO_MPEG1)
610                 snd_iprintf(buffer, " mpeg1");
611         if (chip->audio_info & VX_AUDIO_INFO_MPEG2)
612                 snd_iprintf(buffer, " mpeg2");
613         if (chip->audio_info & VX_AUDIO_INFO_LINEAR_8)
614                 snd_iprintf(buffer, " linear8");
615         if (chip->audio_info & VX_AUDIO_INFO_LINEAR_16)
616                 snd_iprintf(buffer, " linear16");
617         if (chip->audio_info & VX_AUDIO_INFO_LINEAR_24)
618                 snd_iprintf(buffer, " linear24");
619         snd_iprintf(buffer, "\n");
620         snd_iprintf(buffer, "Input Source: %s\n", vx_is_pcmcia(chip) ?
621                     audio_src_vxp[chip->audio_source] :
622                     audio_src_vx2[chip->audio_source]);
623         snd_iprintf(buffer, "Clock Mode: %s\n", clock_mode[chip->clock_mode]);
624         snd_iprintf(buffer, "Clock Source: %s\n", clock_src[chip->clock_source]);
625         snd_iprintf(buffer, "Frequency: %d\n", chip->freq);
626         snd_iprintf(buffer, "Detected Frequency: %d\n", chip->freq_detected);
627         snd_iprintf(buffer, "Detected UER type: %s\n", uer_type[chip->uer_detected]);
628         snd_iprintf(buffer, "Min/Max/Cur IBL: %d/%d/%d (granularity=%d)\n",
629                     chip->ibl.min_size, chip->ibl.max_size, chip->ibl.size,
630                     chip->ibl.granularity);
631 }
632
633 static void vx_proc_init(struct vx_core *chip)
634 {
635         struct snd_info_entry *entry;
636
637         if (! snd_card_proc_new(chip->card, "vx-status", &entry))
638                 snd_info_set_text_ops(entry, chip, 1024, vx_proc_read);
639 }
640
641
642 /**
643  * snd_vx_dsp_boot - load the DSP boot
644  */
645 int snd_vx_dsp_boot(struct vx_core *chip, const struct firmware *boot)
646 {
647         int err;
648         int cold_reset = !(chip->chip_status & VX_STAT_DEVICE_INIT);
649
650         vx_reset_board(chip, cold_reset);
651         vx_validate_irq(chip, 0);
652
653         if ((err = snd_vx_load_boot_image(chip, boot)) < 0)
654                 return err;
655         msleep(10);
656
657         return 0;
658 }
659
660 /**
661  * snd_vx_dsp_load - load the DSP image
662  */
663 int snd_vx_dsp_load(struct vx_core *chip, const struct firmware *dsp)
664 {
665         unsigned int i;
666         int err;
667         unsigned int csum = 0;
668         unsigned char *image, *cptr;
669
670         snd_assert(dsp->size % 3 == 0, return -EINVAL);
671
672         vx_toggle_dac_mute(chip, 1);
673
674         /* Transfert data buffer from PC to DSP */
675         for (i = 0; i < dsp->size; i += 3) {
676                 image = dsp->data + i;
677                 /* Wait DSP ready for a new read */
678                 if ((err = vx_wait_isr_bit(chip, ISR_TX_EMPTY)) < 0) {
679                         printk("dsp loading error at position %d\n", i);
680                         return err;
681                 }
682                 cptr = image;
683                 csum ^= *cptr;
684                 csum = (csum >> 24) | (csum << 8);
685                 vx_outb(chip, TXH, *cptr++);
686                 csum ^= *cptr;
687                 csum = (csum >> 24) | (csum << 8);
688                 vx_outb(chip, TXM, *cptr++);
689                 csum ^= *cptr;
690                 csum = (csum >> 24) | (csum << 8);
691                 vx_outb(chip, TXL, *cptr++);
692         }
693         snd_printdd(KERN_DEBUG "checksum = 0x%08x\n", csum);
694
695         msleep(200);
696
697         if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
698                 return err;
699
700         vx_toggle_dac_mute(chip, 0);
701
702         vx_test_and_ack(chip);
703         vx_validate_irq(chip, 1);
704
705         return 0;
706 }
707
708 #ifdef CONFIG_PM
709 /*
710  * suspend
711  */
712 int snd_vx_suspend(struct vx_core *chip, pm_message_t state)
713 {
714         unsigned int i;
715
716         snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
717         chip->chip_status |= VX_STAT_IN_SUSPEND;
718         for (i = 0; i < chip->hw->num_codecs; i++)
719                 snd_pcm_suspend_all(chip->pcm[i]);
720
721         return 0;
722 }
723
724 /*
725  * resume
726  */
727 int snd_vx_resume(struct vx_core *chip)
728 {
729         int i, err;
730
731         chip->chip_status &= ~VX_STAT_CHIP_INIT;
732
733         for (i = 0; i < 4; i++) {
734                 if (! chip->firmware[i])
735                         continue;
736                 err = chip->ops->load_dsp(chip, i, chip->firmware[i]);
737                 if (err < 0) {
738                         snd_printk(KERN_ERR "vx: firmware resume error at DSP %d\n", i);
739                         return -EIO;
740                 }
741         }
742
743         chip->chip_status |= VX_STAT_CHIP_INIT;
744         chip->chip_status &= ~VX_STAT_IN_SUSPEND;
745
746         snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
747         return 0;
748 }
749
750 #endif
751
752 /**
753  * snd_vx_create - constructor for struct vx_core
754  * @hw: hardware specific record
755  *
756  * this function allocates the instance and prepare for the hardware
757  * initialization.
758  *
759  * return the instance pointer if successful, NULL in error.
760  */
761 struct vx_core *snd_vx_create(struct snd_card *card, struct snd_vx_hardware *hw,
762                               struct snd_vx_ops *ops,
763                               int extra_size)
764 {
765         struct vx_core *chip;
766
767         snd_assert(card && hw && ops, return NULL);
768
769         chip = kzalloc(sizeof(*chip) + extra_size, GFP_KERNEL);
770         if (! chip) {
771                 snd_printk(KERN_ERR "vx_core: no memory\n");
772                 return NULL;
773         }
774         spin_lock_init(&chip->lock);
775         spin_lock_init(&chip->irq_lock);
776         chip->irq = -1;
777         chip->hw = hw;
778         chip->type = hw->type;
779         chip->ops = ops;
780         tasklet_init(&chip->tq, vx_interrupt, (unsigned long)chip);
781         mutex_init(&chip->mixer_mutex);
782
783         chip->card = card;
784         card->private_data = chip;
785         strcpy(card->driver, hw->name);
786         sprintf(card->shortname, "Digigram %s", hw->name);
787
788         vx_proc_init(chip);
789
790         return chip;
791 }
792
793 /*
794  * module entries
795  */
796 static int __init alsa_vx_core_init(void)
797 {
798         return 0;
799 }
800
801 static void __exit alsa_vx_core_exit(void)
802 {
803 }
804
805 module_init(alsa_vx_core_init)
806 module_exit(alsa_vx_core_exit)
807
808 /*
809  * exports
810  */
811 EXPORT_SYMBOL(snd_vx_check_reg_bit);
812 EXPORT_SYMBOL(snd_vx_create);
813 EXPORT_SYMBOL(snd_vx_setup_firmware);
814 EXPORT_SYMBOL(snd_vx_free_firmware);
815 EXPORT_SYMBOL(snd_vx_irq_handler);
816 EXPORT_SYMBOL(snd_vx_dsp_boot);
817 EXPORT_SYMBOL(snd_vx_dsp_load);
818 EXPORT_SYMBOL(snd_vx_load_boot_image);
819 #ifdef CONFIG_PM
820 EXPORT_SYMBOL(snd_vx_suspend);
821 EXPORT_SYMBOL(snd_vx_resume);
822 #endif