]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - drivers/scsi/sym53c8xx_2/sym_glue.c
[SCSI] sym2 version 2.2.1
[linux-2.6.git] / drivers / scsi / sym53c8xx_2 / sym_glue.c
1 /*
2  * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family 
3  * of PCI-SCSI IO processors.
4  *
5  * Copyright (C) 1999-2001  Gerard Roudier <groudier@free.fr>
6  * Copyright (c) 2003-2005  Matthew Wilcox <matthew@wil.cx>
7  *
8  * This driver is derived from the Linux sym53c8xx driver.
9  * Copyright (C) 1998-2000  Gerard Roudier
10  *
11  * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 
12  * a port of the FreeBSD ncr driver to Linux-1.2.13.
13  *
14  * The original ncr driver has been written for 386bsd and FreeBSD by
15  *         Wolfgang Stanglmeier        <wolf@cologne.de>
16  *         Stefan Esser                <se@mi.Uni-Koeln.de>
17  * Copyright (C) 1994  Wolfgang Stanglmeier
18  *
19  * Other major contributions:
20  *
21  * NVRAM detection and reading.
22  * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
23  *
24  *-----------------------------------------------------------------------------
25  *
26  * This program is free software; you can redistribute it and/or modify
27  * it under the terms of the GNU General Public License as published by
28  * the Free Software Foundation; either version 2 of the License, or
29  * (at your option) any later version.
30  *
31  * This program is distributed in the hope that it will be useful,
32  * but WITHOUT ANY WARRANTY; without even the implied warranty of
33  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
34  * GNU General Public License for more details.
35  *
36  * You should have received a copy of the GNU General Public License
37  * along with this program; if not, write to the Free Software
38  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
39  */
40 #include <linux/ctype.h>
41 #include <linux/init.h>
42 #include <linux/interrupt.h>
43 #include <linux/module.h>
44 #include <linux/moduleparam.h>
45 #include <linux/spinlock.h>
46 #include <scsi/scsi.h>
47 #include <scsi/scsi_tcq.h>
48 #include <scsi/scsi_device.h>
49 #include <scsi/scsi_transport.h>
50
51 #include "sym_glue.h"
52 #include "sym_nvram.h"
53
54 #define NAME53C         "sym53c"
55 #define NAME53C8XX      "sym53c8xx"
56
57 /* SPARC just has to be different ... */
58 #ifdef __sparc__
59 #define IRQ_FMT "%s"
60 #define IRQ_PRM(x) __irq_itoa(x)
61 #else
62 #define IRQ_FMT "%d"
63 #define IRQ_PRM(x) (x)
64 #endif
65
66 struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP;
67 unsigned int sym_debug_flags = 0;
68
69 static char *excl_string;
70 static char *safe_string;
71 module_param_named(cmd_per_lun, sym_driver_setup.max_tag, ushort, 0);
72 module_param_string(tag_ctrl, sym_driver_setup.tag_ctrl, 100, 0);
73 module_param_named(burst, sym_driver_setup.burst_order, byte, 0);
74 module_param_named(led, sym_driver_setup.scsi_led, byte, 0);
75 module_param_named(diff, sym_driver_setup.scsi_diff, byte, 0);
76 module_param_named(irqm, sym_driver_setup.irq_mode, byte, 0);
77 module_param_named(buschk, sym_driver_setup.scsi_bus_check, byte, 0);
78 module_param_named(hostid, sym_driver_setup.host_id, byte, 0);
79 module_param_named(verb, sym_driver_setup.verbose, byte, 0);
80 module_param_named(debug, sym_debug_flags, uint, 0);
81 module_param_named(settle, sym_driver_setup.settle_delay, byte, 0);
82 module_param_named(nvram, sym_driver_setup.use_nvram, byte, 0);
83 module_param_named(excl, excl_string, charp, 0);
84 module_param_named(safe, safe_string, charp, 0);
85
86 MODULE_PARM_DESC(cmd_per_lun, "The maximum number of tags to use by default");
87 MODULE_PARM_DESC(tag_ctrl, "More detailed control over tags per LUN");
88 MODULE_PARM_DESC(burst, "Maximum burst.  0 to disable, 255 to read from registers");
89 MODULE_PARM_DESC(led, "Set to 1 to enable LED support");
90 MODULE_PARM_DESC(diff, "0 for no differential mode, 1 for BIOS, 2 for always, 3 for not GPIO3");
91 MODULE_PARM_DESC(irqm, "0 for open drain, 1 to leave alone, 2 for totem pole");
92 MODULE_PARM_DESC(buschk, "0 to not check, 1 for detach on error, 2 for warn on error");
93 MODULE_PARM_DESC(hostid, "The SCSI ID to use for the host adapters");
94 MODULE_PARM_DESC(verb, "0 for minimal verbosity, 1 for normal, 2 for excessive");
95 MODULE_PARM_DESC(debug, "Set bits to enable debugging");
96 MODULE_PARM_DESC(settle, "Settle delay in seconds.  Default 3");
97 MODULE_PARM_DESC(nvram, "Option currently not used");
98 MODULE_PARM_DESC(excl, "List ioport addresses here to prevent controllers from being attached");
99 MODULE_PARM_DESC(safe, "Set other settings to a \"safe mode\"");
100
101 MODULE_LICENSE("GPL");
102 MODULE_VERSION(SYM_VERSION);
103 MODULE_AUTHOR("Matthew Wilcox <matthew@wil.cx>");
104 MODULE_DESCRIPTION("NCR, Symbios and LSI 8xx and 1010 PCI SCSI adapters");
105
106 static void sym2_setup_params(void)
107 {
108         char *p = excl_string;
109         int xi = 0;
110
111         while (p && (xi < 8)) {
112                 char *next_p;
113                 int val = (int) simple_strtoul(p, &next_p, 0);
114                 sym_driver_setup.excludes[xi++] = val;
115                 p = next_p;
116         }
117
118         if (safe_string) {
119                 if (*safe_string == 'y') {
120                         sym_driver_setup.max_tag = 0;
121                         sym_driver_setup.burst_order = 0;
122                         sym_driver_setup.scsi_led = 0;
123                         sym_driver_setup.scsi_diff = 1;
124                         sym_driver_setup.irq_mode = 0;
125                         sym_driver_setup.scsi_bus_check = 2;
126                         sym_driver_setup.host_id = 7;
127                         sym_driver_setup.verbose = 2;
128                         sym_driver_setup.settle_delay = 10;
129                         sym_driver_setup.use_nvram = 1;
130                 } else if (*safe_string != 'n') {
131                         printk(KERN_WARNING NAME53C8XX "Ignoring parameter %s"
132                                         " passed to safe option", safe_string);
133                 }
134         }
135 }
136
137 /*
138  * We used to try to deal with 64-bit BARs here, but don't any more.
139  * There are many parts of this driver which would need to be modified
140  * to handle a 64-bit base address, including scripts.  I'm uncomfortable
141  * with making those changes when I have no way of testing it, so I'm
142  * just going to disable it.
143  *
144  * Note that some machines (eg HP rx8620 and Superdome) have bus addresses
145  * below 4GB and physical addresses above 4GB.  These will continue to work.
146  */
147 static int __devinit
148 pci_get_base_address(struct pci_dev *pdev, int index, unsigned long *basep)
149 {
150         u32 tmp;
151         unsigned long base;
152 #define PCI_BAR_OFFSET(index) (PCI_BASE_ADDRESS_0 + (index<<2))
153
154         pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
155         base = tmp;
156         if ((tmp & 0x7) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
157                 pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
158                 if (tmp > 0) {
159                         dev_err(&pdev->dev,
160                                 "BAR %d is 64-bit, disabling\n", index - 1);
161                         base = 0;
162                 }
163         }
164
165         if ((base & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
166                 base &= PCI_BASE_ADDRESS_IO_MASK;
167         } else {
168                 base &= PCI_BASE_ADDRESS_MEM_MASK;
169         }
170
171         *basep = base;
172         return index;
173 #undef PCI_BAR_OFFSET
174 }
175
176 static struct scsi_transport_template *sym2_transport_template = NULL;
177
178 /*
179  *  Used by the eh thread to wait for command completion.
180  *  It is allocated on the eh thread stack.
181  */
182 struct sym_eh_wait {
183         struct completion done;
184         struct timer_list timer;
185         void (*old_done)(struct scsi_cmnd *);
186         int to_do;
187         int timed_out;
188 };
189
190 /*
191  *  Driver private area in the SCSI command structure.
192  */
193 struct sym_ucmd {               /* Override the SCSI pointer structure */
194         dma_addr_t data_mapping;
195         u_char  data_mapped;
196         struct sym_eh_wait *eh_wait;
197 };
198
199 #define SYM_UCMD_PTR(cmd)  ((struct sym_ucmd *)(&(cmd)->SCp))
200 #define SYM_SOFTC_PTR(cmd) sym_get_hcb(cmd->device->host)
201
202 static void __unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
203 {
204         int dma_dir = cmd->sc_data_direction;
205
206         switch(SYM_UCMD_PTR(cmd)->data_mapped) {
207         case 2:
208                 pci_unmap_sg(pdev, cmd->buffer, cmd->use_sg, dma_dir);
209                 break;
210         case 1:
211                 pci_unmap_single(pdev, SYM_UCMD_PTR(cmd)->data_mapping,
212                                  cmd->request_bufflen, dma_dir);
213                 break;
214         }
215         SYM_UCMD_PTR(cmd)->data_mapped = 0;
216 }
217
218 static dma_addr_t __map_scsi_single_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
219 {
220         dma_addr_t mapping;
221         int dma_dir = cmd->sc_data_direction;
222
223         mapping = pci_map_single(pdev, cmd->request_buffer,
224                                  cmd->request_bufflen, dma_dir);
225         if (mapping) {
226                 SYM_UCMD_PTR(cmd)->data_mapped  = 1;
227                 SYM_UCMD_PTR(cmd)->data_mapping = mapping;
228         }
229
230         return mapping;
231 }
232
233 static int __map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
234 {
235         int use_sg;
236         int dma_dir = cmd->sc_data_direction;
237
238         use_sg = pci_map_sg(pdev, cmd->buffer, cmd->use_sg, dma_dir);
239         if (use_sg > 0) {
240                 SYM_UCMD_PTR(cmd)->data_mapped  = 2;
241                 SYM_UCMD_PTR(cmd)->data_mapping = use_sg;
242         }
243
244         return use_sg;
245 }
246
247 #define unmap_scsi_data(np, cmd)        \
248                 __unmap_scsi_data(np->s.device, cmd)
249 #define map_scsi_single_data(np, cmd)   \
250                 __map_scsi_single_data(np->s.device, cmd)
251 #define map_scsi_sg_data(np, cmd)       \
252                 __map_scsi_sg_data(np->s.device, cmd)
253 /*
254  *  Complete a pending CAM CCB.
255  */
256 void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *cmd)
257 {
258         unmap_scsi_data(np, cmd);
259         cmd->scsi_done(cmd);
260 }
261
262 static void sym_xpt_done2(struct sym_hcb *np, struct scsi_cmnd *cmd, int cam_status)
263 {
264         sym_set_cam_status(cmd, cam_status);
265         sym_xpt_done(np, cmd);
266 }
267
268
269 /*
270  *  Tell the SCSI layer about a BUS RESET.
271  */
272 void sym_xpt_async_bus_reset(struct sym_hcb *np)
273 {
274         printf_notice("%s: SCSI BUS has been reset.\n", sym_name(np));
275         np->s.settle_time = jiffies + sym_driver_setup.settle_delay * HZ;
276         np->s.settle_time_valid = 1;
277         if (sym_verbose >= 2)
278                 printf_info("%s: command processing suspended for %d seconds\n",
279                             sym_name(np), sym_driver_setup.settle_delay);
280 }
281
282 /*
283  *  Tell the SCSI layer about a BUS DEVICE RESET message sent.
284  */
285 void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target)
286 {
287         printf_notice("%s: TARGET %d has been reset.\n", sym_name(np), target);
288 }
289
290 /*
291  *  Choose the more appropriate CAM status if 
292  *  the IO encountered an extended error.
293  */
294 static int sym_xerr_cam_status(int cam_status, int x_status)
295 {
296         if (x_status) {
297                 if      (x_status & XE_PARITY_ERR)
298                         cam_status = DID_PARITY;
299                 else if (x_status &(XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN))
300                         cam_status = DID_ERROR;
301                 else if (x_status & XE_BAD_PHASE)
302                         cam_status = DID_ERROR;
303                 else
304                         cam_status = DID_ERROR;
305         }
306         return cam_status;
307 }
308
309 /*
310  *  Build CAM result for a failed or auto-sensed IO.
311  */
312 void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid)
313 {
314         struct scsi_cmnd *cmd = cp->cmd;
315         u_int cam_status, scsi_status, drv_status;
316
317         drv_status  = 0;
318         cam_status  = DID_OK;
319         scsi_status = cp->ssss_status;
320
321         if (cp->host_flags & HF_SENSE) {
322                 scsi_status = cp->sv_scsi_status;
323                 resid = cp->sv_resid;
324                 if (sym_verbose && cp->sv_xerr_status)
325                         sym_print_xerr(cmd, cp->sv_xerr_status);
326                 if (cp->host_status == HS_COMPLETE &&
327                     cp->ssss_status == S_GOOD &&
328                     cp->xerr_status == 0) {
329                         cam_status = sym_xerr_cam_status(DID_OK,
330                                                          cp->sv_xerr_status);
331                         drv_status = DRIVER_SENSE;
332                         /*
333                          *  Bounce back the sense data to user.
334                          */
335                         memset(&cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
336                         memcpy(cmd->sense_buffer, cp->sns_bbuf,
337                               min(sizeof(cmd->sense_buffer),
338                                   (size_t)SYM_SNS_BBUF_LEN));
339 #if 0
340                         /*
341                          *  If the device reports a UNIT ATTENTION condition 
342                          *  due to a RESET condition, we should consider all 
343                          *  disconnect CCBs for this unit as aborted.
344                          */
345                         if (1) {
346                                 u_char *p;
347                                 p  = (u_char *) cmd->sense_data;
348                                 if (p[0]==0x70 && p[2]==0x6 && p[12]==0x29)
349                                         sym_clear_tasks(np, DID_ABORT,
350                                                         cp->target,cp->lun, -1);
351                         }
352 #endif
353                 } else {
354                         /*
355                          * Error return from our internal request sense.  This
356                          * is bad: we must clear the contingent allegiance
357                          * condition otherwise the device will always return
358                          * BUSY.  Use a big stick.
359                          */
360                         sym_reset_scsi_target(np, cmd->device->id);
361                         cam_status = DID_ERROR;
362                 }
363         } else if (cp->host_status == HS_COMPLETE)      /* Bad SCSI status */
364                 cam_status = DID_OK;
365         else if (cp->host_status == HS_SEL_TIMEOUT)     /* Selection timeout */
366                 cam_status = DID_NO_CONNECT;
367         else if (cp->host_status == HS_UNEXPECTED)      /* Unexpected BUS FREE*/
368                 cam_status = DID_ERROR;
369         else {                                          /* Extended error */
370                 if (sym_verbose) {
371                         sym_print_addr(cmd, "COMMAND FAILED (%x %x %x).\n",
372                                 cp->host_status, cp->ssss_status,
373                                 cp->xerr_status);
374                 }
375                 /*
376                  *  Set the most appropriate value for CAM status.
377                  */
378                 cam_status = sym_xerr_cam_status(DID_ERROR, cp->xerr_status);
379         }
380         cmd->resid = resid;
381         cmd->result = (drv_status << 24) + (cam_status << 16) + scsi_status;
382 }
383
384
385 /*
386  *  Build the scatter/gather array for an I/O.
387  */
388
389 static int sym_scatter_no_sglist(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd *cmd)
390 {
391         struct sym_tblmove *data = &cp->phys.data[SYM_CONF_MAX_SG-1];
392         int segment;
393         unsigned int len = cmd->request_bufflen;
394
395         if (len) {
396                 dma_addr_t baddr = map_scsi_single_data(np, cmd);
397                 if (baddr) {
398                         if (len & 1) {
399                                 struct sym_tcb *tp = &np->target[cp->target];
400                                 if (tp->head.wval & EWS) {
401                                         len++;
402                                         cp->odd_byte_adjustment++;
403                                 }
404                         }
405                         cp->data_len = len;
406                         sym_build_sge(np, data, baddr, len);
407                         segment = 1;
408                 } else {
409                         segment = -2;
410                 }
411         } else {
412                 segment = 0;
413         }
414
415         return segment;
416 }
417
418 static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd *cmd)
419 {
420         int segment;
421         int use_sg = (int) cmd->use_sg;
422
423         cp->data_len = 0;
424
425         if (!use_sg)
426                 segment = sym_scatter_no_sglist(np, cp, cmd);
427         else if ((use_sg = map_scsi_sg_data(np, cmd)) > 0) {
428                 struct scatterlist *scatter = (struct scatterlist *)cmd->buffer;
429                 struct sym_tcb *tp = &np->target[cp->target];
430                 struct sym_tblmove *data;
431
432                 if (use_sg > SYM_CONF_MAX_SG) {
433                         unmap_scsi_data(np, cmd);
434                         return -1;
435                 }
436
437                 data = &cp->phys.data[SYM_CONF_MAX_SG - use_sg];
438
439                 for (segment = 0; segment < use_sg; segment++) {
440                         dma_addr_t baddr = sg_dma_address(&scatter[segment]);
441                         unsigned int len = sg_dma_len(&scatter[segment]);
442
443                         if ((len & 1) && (tp->head.wval & EWS)) {
444                                 len++;
445                                 cp->odd_byte_adjustment++;
446                         }
447
448                         sym_build_sge(np, &data[segment], baddr, len);
449                         cp->data_len += len;
450                 }
451         } else {
452                 segment = -2;
453         }
454
455         return segment;
456 }
457
458 /*
459  *  Queue a SCSI command.
460  */
461 static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
462 {
463         struct scsi_device *sdev = cmd->device;
464         struct sym_tcb *tp;
465         struct sym_lcb *lp;
466         struct sym_ccb *cp;
467         int     order;
468
469         /*
470          *  Minimal checkings, so that we will not 
471          *  go outside our tables.
472          */
473         if (sdev->id == np->myaddr) {
474                 sym_xpt_done2(np, cmd, DID_NO_CONNECT);
475                 return 0;
476         }
477
478         /*
479          *  Retrieve the target descriptor.
480          */
481         tp = &np->target[sdev->id];
482
483         /*
484          *  Select tagged/untagged.
485          */
486         lp = sym_lp(tp, sdev->lun);
487         order = (lp && lp->s.reqtags) ? M_SIMPLE_TAG : 0;
488
489         /*
490          *  Queue the SCSI IO.
491          */
492         cp = sym_get_ccb(np, cmd, order);
493         if (!cp)
494                 return 1;       /* Means resource shortage */
495         sym_queue_scsiio(np, cmd, cp);
496         return 0;
497 }
498
499 /*
500  *  Setup buffers and pointers that address the CDB.
501  */
502 static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
503 {
504         memcpy(cp->cdb_buf, cmd->cmnd, cmd->cmd_len);
505
506         cp->phys.cmd.addr = CCB_BA(cp, cdb_buf[0]);
507         cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len);
508
509         return 0;
510 }
511
512 /*
513  *  Setup pointers that address the data and start the I/O.
514  */
515 int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
516 {
517         int dir;
518         struct sym_tcb *tp = &np->target[cp->target];
519         struct sym_lcb *lp = sym_lp(tp, cp->lun);
520
521         /*
522          *  Build the CDB.
523          */
524         if (sym_setup_cdb(np, cmd, cp))
525                 goto out_abort;
526
527         /*
528          *  No direction means no data.
529          */
530         dir = cmd->sc_data_direction;
531         if (dir != DMA_NONE) {
532                 cp->segments = sym_scatter(np, cp, cmd);
533                 if (cp->segments < 0) {
534                         sym_set_cam_status(cmd, DID_ERROR);
535                         goto out_abort;
536                 }
537         } else {
538                 cp->data_len = 0;
539                 cp->segments = 0;
540         }
541
542         /*
543          *  Set data pointers.
544          */
545         sym_setup_data_pointers(np, cp, dir);
546
547         /*
548          *  When `#ifed 1', the code below makes the driver 
549          *  panic on the first attempt to write to a SCSI device.
550          *  It is the first test we want to do after a driver 
551          *  change that does not seem obviously safe. :)
552          */
553 #if 0
554         switch (cp->cdb_buf[0]) {
555         case 0x0A: case 0x2A: case 0xAA:
556                 panic("XXXXXXXXXXXXX WRITE NOT YET ALLOWED XXXXXXXXXXXXXX\n");
557                 break;
558         default:
559                 break;
560         }
561 #endif
562
563         /*
564          *      activate this job.
565          */
566         if (lp)
567                 sym_start_next_ccbs(np, lp, 2);
568         else
569                 sym_put_start_queue(np, cp);
570         return 0;
571
572 out_abort:
573         sym_free_ccb(np, cp);
574         sym_xpt_done(np, cmd);
575         return 0;
576 }
577
578
579 /*
580  *  timer daemon.
581  *
582  *  Misused to keep the driver running when
583  *  interrupts are not configured correctly.
584  */
585 static void sym_timer(struct sym_hcb *np)
586 {
587         unsigned long thistime = jiffies;
588
589         /*
590          *  Restart the timer.
591          */
592         np->s.timer.expires = thistime + SYM_CONF_TIMER_INTERVAL;
593         add_timer(&np->s.timer);
594
595         /*
596          *  If we are resetting the ncr, wait for settle_time before 
597          *  clearing it. Then command processing will be resumed.
598          */
599         if (np->s.settle_time_valid) {
600                 if (time_before_eq(np->s.settle_time, thistime)) {
601                         if (sym_verbose >= 2 )
602                                 printk("%s: command processing resumed\n",
603                                        sym_name(np));
604                         np->s.settle_time_valid = 0;
605                 }
606                 return;
607         }
608
609         /*
610          *      Nothing to do for now, but that may come.
611          */
612         if (np->s.lasttime + 4*HZ < thistime) {
613                 np->s.lasttime = thistime;
614         }
615
616 #ifdef SYM_CONF_PCIQ_MAY_MISS_COMPLETIONS
617         /*
618          *  Some way-broken PCI bridges may lead to 
619          *  completions being lost when the clearing 
620          *  of the INTFLY flag by the CPU occurs 
621          *  concurrently with the chip raising this flag.
622          *  If this ever happen, lost completions will 
623          * be reaped here.
624          */
625         sym_wakeup_done(np);
626 #endif
627 }
628
629
630 /*
631  *  PCI BUS error handler.
632  */
633 void sym_log_bus_error(struct sym_hcb *np)
634 {
635         u_short pci_sts;
636         pci_read_config_word(np->s.device, PCI_STATUS, &pci_sts);
637         if (pci_sts & 0xf900) {
638                 pci_write_config_word(np->s.device, PCI_STATUS, pci_sts);
639                 printf("%s: PCI STATUS = 0x%04x\n",
640                         sym_name(np), pci_sts & 0xf900);
641         }
642 }
643
644 /*
645  * queuecommand method.  Entered with the host adapter lock held and
646  * interrupts disabled.
647  */
648 static int sym53c8xx_queue_command(struct scsi_cmnd *cmd,
649                                         void (*done)(struct scsi_cmnd *))
650 {
651         struct sym_hcb *np = SYM_SOFTC_PTR(cmd);
652         struct sym_ucmd *ucp = SYM_UCMD_PTR(cmd);
653         int sts = 0;
654
655         cmd->scsi_done     = done;
656         memset(ucp, 0, sizeof(*ucp));
657
658         /*
659          *  Shorten our settle_time if needed for 
660          *  this command not to time out.
661          */
662         if (np->s.settle_time_valid && cmd->timeout_per_command) {
663                 unsigned long tlimit = jiffies + cmd->timeout_per_command;
664                 tlimit -= SYM_CONF_TIMER_INTERVAL*2;
665                 if (time_after(np->s.settle_time, tlimit)) {
666                         np->s.settle_time = tlimit;
667                 }
668         }
669
670         if (np->s.settle_time_valid)
671                 return SCSI_MLQUEUE_HOST_BUSY;
672
673         sts = sym_queue_command(np, cmd);
674         if (sts)
675                 return SCSI_MLQUEUE_HOST_BUSY;
676         return 0;
677 }
678
679 /*
680  *  Linux entry point of the interrupt handler.
681  */
682 static irqreturn_t sym53c8xx_intr(int irq, void *dev_id, struct pt_regs * regs)
683 {
684         unsigned long flags;
685         struct sym_hcb *np = (struct sym_hcb *)dev_id;
686
687         if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("[");
688
689         spin_lock_irqsave(np->s.host->host_lock, flags);
690         sym_interrupt(np);
691         spin_unlock_irqrestore(np->s.host->host_lock, flags);
692
693         if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("]\n");
694
695         return IRQ_HANDLED;
696 }
697
698 /*
699  *  Linux entry point of the timer handler
700  */
701 static void sym53c8xx_timer(unsigned long npref)
702 {
703         struct sym_hcb *np = (struct sym_hcb *)npref;
704         unsigned long flags;
705
706         spin_lock_irqsave(np->s.host->host_lock, flags);
707         sym_timer(np);
708         spin_unlock_irqrestore(np->s.host->host_lock, flags);
709 }
710
711
712 /*
713  *  What the eh thread wants us to perform.
714  */
715 #define SYM_EH_ABORT            0
716 #define SYM_EH_DEVICE_RESET     1
717 #define SYM_EH_BUS_RESET        2
718 #define SYM_EH_HOST_RESET       3
719
720 /*
721  *  What we will do regarding the involved SCSI command.
722  */
723 #define SYM_EH_DO_IGNORE        0
724 #define SYM_EH_DO_COMPLETE      1
725 #define SYM_EH_DO_WAIT          2
726
727 /*
728  *  Our general completion handler.
729  */
730 static void __sym_eh_done(struct scsi_cmnd *cmd, int timed_out)
731 {
732         struct sym_eh_wait *ep = SYM_UCMD_PTR(cmd)->eh_wait;
733         if (!ep)
734                 return;
735
736         /* Try to avoid a race here (not 100% safe) */
737         if (!timed_out) {
738                 ep->timed_out = 0;
739                 if (ep->to_do == SYM_EH_DO_WAIT && !del_timer(&ep->timer))
740                         return;
741         }
742
743         /* Revert everything */
744         SYM_UCMD_PTR(cmd)->eh_wait = NULL;
745         cmd->scsi_done = ep->old_done;
746
747         /* Wake up the eh thread if it wants to sleep */
748         if (ep->to_do == SYM_EH_DO_WAIT)
749                 complete(&ep->done);
750 }
751
752 /*
753  *  scsi_done() alias when error recovery is in progress. 
754  */
755 static void sym_eh_done(struct scsi_cmnd *cmd) { __sym_eh_done(cmd, 0); }
756
757 /*
758  *  Some timeout handler to avoid waiting too long.
759  */
760 static void sym_eh_timeout(u_long p) { __sym_eh_done((struct scsi_cmnd *)p, 1); }
761
762 /*
763  *  Generic method for our eh processing.
764  *  The 'op' argument tells what we have to do.
765  */
766 static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
767 {
768         struct sym_hcb *np = SYM_SOFTC_PTR(cmd);
769         SYM_QUEHEAD *qp;
770         int to_do = SYM_EH_DO_IGNORE;
771         int sts = -1;
772         struct sym_eh_wait eh, *ep = &eh;
773
774         dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname);
775
776         /* This one is queued in some place -> to wait for completion */
777         FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
778                 struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
779                 if (cp->cmd == cmd) {
780                         to_do = SYM_EH_DO_WAIT;
781                         goto prepare;
782                 }
783         }
784
785 prepare:
786         /* Prepare stuff to either ignore, complete or wait for completion */
787         switch(to_do) {
788         default:
789         case SYM_EH_DO_IGNORE:
790                 break;
791         case SYM_EH_DO_WAIT:
792                 init_completion(&ep->done);
793                 /* fall through */
794         case SYM_EH_DO_COMPLETE:
795                 ep->old_done = cmd->scsi_done;
796                 cmd->scsi_done = sym_eh_done;
797                 SYM_UCMD_PTR(cmd)->eh_wait = ep;
798         }
799
800         /* Try to proceed the operation we have been asked for */
801         sts = -1;
802         switch(op) {
803         case SYM_EH_ABORT:
804                 sts = sym_abort_scsiio(np, cmd, 1);
805                 break;
806         case SYM_EH_DEVICE_RESET:
807                 sts = sym_reset_scsi_target(np, cmd->device->id);
808                 break;
809         case SYM_EH_BUS_RESET:
810                 sym_reset_scsi_bus(np, 1);
811                 sts = 0;
812                 break;
813         case SYM_EH_HOST_RESET:
814                 sym_reset_scsi_bus(np, 0);
815                 sym_start_up (np, 1);
816                 sts = 0;
817                 break;
818         default:
819                 break;
820         }
821
822         /* On error, restore everything and cross fingers :) */
823         if (sts) {
824                 SYM_UCMD_PTR(cmd)->eh_wait = NULL;
825                 cmd->scsi_done = ep->old_done;
826                 to_do = SYM_EH_DO_IGNORE;
827         }
828
829         ep->to_do = to_do;
830         /* Complete the command with locks held as required by the driver */
831         if (to_do == SYM_EH_DO_COMPLETE)
832                 sym_xpt_done2(np, cmd, DID_ABORT);
833
834         /* Wait for completion with locks released, as required by kernel */
835         if (to_do == SYM_EH_DO_WAIT) {
836                 init_timer(&ep->timer);
837                 ep->timer.expires = jiffies + (5*HZ);
838                 ep->timer.function = sym_eh_timeout;
839                 ep->timer.data = (u_long)cmd;
840                 ep->timed_out = 1;      /* Be pessimistic for once :) */
841                 add_timer(&ep->timer);
842                 spin_unlock_irq(np->s.host->host_lock);
843                 wait_for_completion(&ep->done);
844                 spin_lock_irq(np->s.host->host_lock);
845                 if (ep->timed_out)
846                         sts = -2;
847         }
848         dev_warn(&cmd->device->sdev_gendev, "%s operation %s.\n", opname,
849                         sts==0 ? "complete" :sts==-2 ? "timed-out" : "failed");
850         return sts ? SCSI_FAILED : SCSI_SUCCESS;
851 }
852
853
854 /*
855  * Error handlers called from the eh thread (one thread per HBA).
856  */
857 static int sym53c8xx_eh_abort_handler(struct scsi_cmnd *cmd)
858 {
859         return sym_eh_handler(SYM_EH_ABORT, "ABORT", cmd);
860 }
861
862 static int sym53c8xx_eh_device_reset_handler(struct scsi_cmnd *cmd)
863 {
864         return sym_eh_handler(SYM_EH_DEVICE_RESET, "DEVICE RESET", cmd);
865 }
866
867 static int sym53c8xx_eh_bus_reset_handler(struct scsi_cmnd *cmd)
868 {
869         return sym_eh_handler(SYM_EH_BUS_RESET, "BUS RESET", cmd);
870 }
871
872 static int sym53c8xx_eh_host_reset_handler(struct scsi_cmnd *cmd)
873 {
874         return sym_eh_handler(SYM_EH_HOST_RESET, "HOST RESET", cmd);
875 }
876
877 /*
878  *  Tune device queuing depth, according to various limits.
879  */
880 static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
881 {
882         struct sym_lcb *lp = sym_lp(tp, lun);
883         u_short oldtags;
884
885         if (!lp)
886                 return;
887
888         oldtags = lp->s.reqtags;
889
890         if (reqtags > lp->s.scdev_depth)
891                 reqtags = lp->s.scdev_depth;
892
893         lp->started_limit = reqtags ? reqtags : 2;
894         lp->started_max   = 1;
895         lp->s.reqtags     = reqtags;
896
897         if (reqtags != oldtags) {
898                 dev_info(&tp->starget->dev,
899                          "tagged command queuing %s, command queue depth %d.\n",
900                           lp->s.reqtags ? "enabled" : "disabled",
901                           lp->started_limit);
902         }
903 }
904
905 /*
906  *  Linux select queue depths function
907  */
908 #define DEF_DEPTH       (sym_driver_setup.max_tag)
909 #define ALL_TARGETS     -2
910 #define NO_TARGET       -1
911 #define ALL_LUNS        -2
912 #define NO_LUN          -1
913
914 static int device_queue_depth(struct sym_hcb *np, int target, int lun)
915 {
916         int c, h, t, u, v;
917         char *p = sym_driver_setup.tag_ctrl;
918         char *ep;
919
920         h = -1;
921         t = NO_TARGET;
922         u = NO_LUN;
923         while ((c = *p++) != 0) {
924                 v = simple_strtoul(p, &ep, 0);
925                 switch(c) {
926                 case '/':
927                         ++h;
928                         t = ALL_TARGETS;
929                         u = ALL_LUNS;
930                         break;
931                 case 't':
932                         if (t != target)
933                                 t = (target == v) ? v : NO_TARGET;
934                         u = ALL_LUNS;
935                         break;
936                 case 'u':
937                         if (u != lun)
938                                 u = (lun == v) ? v : NO_LUN;
939                         break;
940                 case 'q':
941                         if (h == np->s.unit &&
942                                 (t == ALL_TARGETS || t == target) &&
943                                 (u == ALL_LUNS    || u == lun))
944                                 return v;
945                         break;
946                 case '-':
947                         t = ALL_TARGETS;
948                         u = ALL_LUNS;
949                         break;
950                 default:
951                         break;
952                 }
953                 p = ep;
954         }
955         return DEF_DEPTH;
956 }
957
958 static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
959 {
960         struct sym_hcb *np;
961         struct sym_tcb *tp;
962
963         if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN)
964                 return -ENXIO;
965
966         np = sym_get_hcb(sdev->host);
967         tp = &np->target[sdev->id];
968
969         /*
970          * Fail the device init if the device is flagged NOSCAN at BOOT in
971          * the NVRAM.  This may speed up boot and maintain coherency with
972          * BIOS device numbering.  Clearing the flag allows the user to
973          * rescan skipped devices later.  We also return an error for
974          * devices not flagged for SCAN LUNS in the NVRAM since some single
975          * lun devices behave badly when asked for a non zero LUN.
976          */
977
978         if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) ||
979             ((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && sdev->lun != 0)) {
980                 tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
981                 return -ENXIO;
982         }
983
984         tp->starget = sdev->sdev_target;
985         return 0;
986 }
987
988 /*
989  * Linux entry point for device queue sizing.
990  */
991 static int sym53c8xx_slave_configure(struct scsi_device *device)
992 {
993         struct sym_hcb *np = sym_get_hcb(device->host);
994         struct sym_tcb *tp = &np->target[device->id];
995         struct sym_lcb *lp;
996         int reqtags, depth_to_use;
997
998         /*
999          *  Allocate the LCB if not yet.
1000          *  If it fail, we may well be in the sh*t. :)
1001          */
1002         lp = sym_alloc_lcb(np, device->id, device->lun);
1003         if (!lp)
1004                 return -ENOMEM;
1005
1006         /*
1007          *  Get user flags.
1008          */
1009         lp->curr_flags = lp->user_flags;
1010
1011         /*
1012          *  Select queue depth from driver setup.
1013          *  Donnot use more than configured by user.
1014          *  Use at least 2.
1015          *  Donnot use more than our maximum.
1016          */
1017         reqtags = device_queue_depth(np, device->id, device->lun);
1018         if (reqtags > tp->usrtags)
1019                 reqtags = tp->usrtags;
1020         if (!device->tagged_supported)
1021                 reqtags = 0;
1022 #if 1 /* Avoid to locally queue commands for no good reasons */
1023         if (reqtags > SYM_CONF_MAX_TAG)
1024                 reqtags = SYM_CONF_MAX_TAG;
1025         depth_to_use = (reqtags ? reqtags : 2);
1026 #else
1027         depth_to_use = (reqtags ? SYM_CONF_MAX_TAG : 2);
1028 #endif
1029         scsi_adjust_queue_depth(device,
1030                                 (device->tagged_supported ?
1031                                  MSG_SIMPLE_TAG : 0),
1032                                 depth_to_use);
1033         lp->s.scdev_depth = depth_to_use;
1034         sym_tune_dev_queuing(tp, device->lun, reqtags);
1035
1036         if (!spi_initial_dv(device->sdev_target))
1037                 spi_dv_device(device);
1038
1039         return 0;
1040 }
1041
1042 /*
1043  *  Linux entry point for info() function
1044  */
1045 static const char *sym53c8xx_info (struct Scsi_Host *host)
1046 {
1047         return SYM_DRIVER_NAME;
1048 }
1049
1050
1051 #ifdef SYM_LINUX_PROC_INFO_SUPPORT
1052 /*
1053  *  Proc file system stuff
1054  *
1055  *  A read operation returns adapter information.
1056  *  A write operation is a control command.
1057  *  The string is parsed in the driver code and the command is passed 
1058  *  to the sym_usercmd() function.
1059  */
1060
1061 #ifdef SYM_LINUX_USER_COMMAND_SUPPORT
1062
1063 struct  sym_usrcmd {
1064         u_long  target;
1065         u_long  lun;
1066         u_long  data;
1067         u_long  cmd;
1068 };
1069
1070 #define UC_SETSYNC      10
1071 #define UC_SETTAGS      11
1072 #define UC_SETDEBUG     12
1073 #define UC_SETWIDE      14
1074 #define UC_SETFLAG      15
1075 #define UC_SETVERBOSE   17
1076 #define UC_RESETDEV     18
1077 #define UC_CLEARDEV     19
1078
1079 static void sym_exec_user_command (struct sym_hcb *np, struct sym_usrcmd *uc)
1080 {
1081         struct sym_tcb *tp;
1082         int t, l;
1083
1084         switch (uc->cmd) {
1085         case 0: return;
1086
1087 #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
1088         case UC_SETDEBUG:
1089                 sym_debug_flags = uc->data;
1090                 break;
1091 #endif
1092         case UC_SETVERBOSE:
1093                 np->verbose = uc->data;
1094                 break;
1095         default:
1096                 /*
1097                  * We assume that other commands apply to targets.
1098                  * This should always be the case and avoid the below 
1099                  * 4 lines to be repeated 6 times.
1100                  */
1101                 for (t = 0; t < SYM_CONF_MAX_TARGET; t++) {
1102                         if (!((uc->target >> t) & 1))
1103                                 continue;
1104                         tp = &np->target[t];
1105
1106                         switch (uc->cmd) {
1107
1108                         case UC_SETSYNC:
1109                                 if (!uc->data || uc->data >= 255) {
1110                                         tp->tgoal.iu = tp->tgoal.dt =
1111                                                 tp->tgoal.qas = 0;
1112                                         tp->tgoal.offset = 0;
1113                                 } else if (uc->data <= 9 && np->minsync_dt) {
1114                                         if (uc->data < np->minsync_dt)
1115                                                 uc->data = np->minsync_dt;
1116                                         tp->tgoal.iu = tp->tgoal.dt =
1117                                                 tp->tgoal.qas = 1;
1118                                         tp->tgoal.width = 1;
1119                                         tp->tgoal.period = uc->data;
1120                                         tp->tgoal.offset = np->maxoffs_dt;
1121                                 } else {
1122                                         if (uc->data < np->minsync)
1123                                                 uc->data = np->minsync;
1124                                         tp->tgoal.iu = tp->tgoal.dt =
1125                                                 tp->tgoal.qas = 0;
1126                                         tp->tgoal.period = uc->data;
1127                                         tp->tgoal.offset = np->maxoffs;
1128                                 }
1129                                 tp->tgoal.check_nego = 1;
1130                                 break;
1131                         case UC_SETWIDE:
1132                                 tp->tgoal.width = uc->data ? 1 : 0;
1133                                 tp->tgoal.check_nego = 1;
1134                                 break;
1135                         case UC_SETTAGS:
1136                                 for (l = 0; l < SYM_CONF_MAX_LUN; l++)
1137                                         sym_tune_dev_queuing(tp, l, uc->data);
1138                                 break;
1139                         case UC_RESETDEV:
1140                                 tp->to_reset = 1;
1141                                 np->istat_sem = SEM;
1142                                 OUTB(np, nc_istat, SIGP|SEM);
1143                                 break;
1144                         case UC_CLEARDEV:
1145                                 for (l = 0; l < SYM_CONF_MAX_LUN; l++) {
1146                                         struct sym_lcb *lp = sym_lp(tp, l);
1147                                         if (lp) lp->to_clear = 1;
1148                                 }
1149                                 np->istat_sem = SEM;
1150                                 OUTB(np, nc_istat, SIGP|SEM);
1151                                 break;
1152                         case UC_SETFLAG:
1153                                 tp->usrflags = uc->data;
1154                                 break;
1155                         }
1156                 }
1157                 break;
1158         }
1159 }
1160
1161 static int skip_spaces(char *ptr, int len)
1162 {
1163         int cnt, c;
1164
1165         for (cnt = len; cnt > 0 && (c = *ptr++) && isspace(c); cnt--);
1166
1167         return (len - cnt);
1168 }
1169
1170 static int get_int_arg(char *ptr, int len, u_long *pv)
1171 {
1172         char *end;
1173
1174         *pv = simple_strtoul(ptr, &end, 10);
1175         return (end - ptr);
1176 }
1177
1178 static int is_keyword(char *ptr, int len, char *verb)
1179 {
1180         int verb_len = strlen(verb);
1181
1182         if (len >= verb_len && !memcmp(verb, ptr, verb_len))
1183                 return verb_len;
1184         else
1185                 return 0;
1186 }
1187
1188 #define SKIP_SPACES(ptr, len)                                           \
1189         if ((arg_len = skip_spaces(ptr, len)) < 1)                      \
1190                 return -EINVAL;                                         \
1191         ptr += arg_len; len -= arg_len;
1192
1193 #define GET_INT_ARG(ptr, len, v)                                        \
1194         if (!(arg_len = get_int_arg(ptr, len, &(v))))                   \
1195                 return -EINVAL;                                         \
1196         ptr += arg_len; len -= arg_len;
1197
1198
1199 /*
1200  * Parse a control command
1201  */
1202
1203 static int sym_user_command(struct sym_hcb *np, char *buffer, int length)
1204 {
1205         char *ptr       = buffer;
1206         int len         = length;
1207         struct sym_usrcmd cmd, *uc = &cmd;
1208         int             arg_len;
1209         u_long          target;
1210
1211         memset(uc, 0, sizeof(*uc));
1212
1213         if (len > 0 && ptr[len-1] == '\n')
1214                 --len;
1215
1216         if      ((arg_len = is_keyword(ptr, len, "setsync")) != 0)
1217                 uc->cmd = UC_SETSYNC;
1218         else if ((arg_len = is_keyword(ptr, len, "settags")) != 0)
1219                 uc->cmd = UC_SETTAGS;
1220         else if ((arg_len = is_keyword(ptr, len, "setverbose")) != 0)
1221                 uc->cmd = UC_SETVERBOSE;
1222         else if ((arg_len = is_keyword(ptr, len, "setwide")) != 0)
1223                 uc->cmd = UC_SETWIDE;
1224 #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
1225         else if ((arg_len = is_keyword(ptr, len, "setdebug")) != 0)
1226                 uc->cmd = UC_SETDEBUG;
1227 #endif
1228         else if ((arg_len = is_keyword(ptr, len, "setflag")) != 0)
1229                 uc->cmd = UC_SETFLAG;
1230         else if ((arg_len = is_keyword(ptr, len, "resetdev")) != 0)
1231                 uc->cmd = UC_RESETDEV;
1232         else if ((arg_len = is_keyword(ptr, len, "cleardev")) != 0)
1233                 uc->cmd = UC_CLEARDEV;
1234         else
1235                 arg_len = 0;
1236
1237 #ifdef DEBUG_PROC_INFO
1238 printk("sym_user_command: arg_len=%d, cmd=%ld\n", arg_len, uc->cmd);
1239 #endif
1240
1241         if (!arg_len)
1242                 return -EINVAL;
1243         ptr += arg_len; len -= arg_len;
1244
1245         switch(uc->cmd) {
1246         case UC_SETSYNC:
1247         case UC_SETTAGS:
1248         case UC_SETWIDE:
1249         case UC_SETFLAG:
1250         case UC_RESETDEV:
1251         case UC_CLEARDEV:
1252                 SKIP_SPACES(ptr, len);
1253                 if ((arg_len = is_keyword(ptr, len, "all")) != 0) {
1254                         ptr += arg_len; len -= arg_len;
1255                         uc->target = ~0;
1256                 } else {
1257                         GET_INT_ARG(ptr, len, target);
1258                         uc->target = (1<<target);
1259 #ifdef DEBUG_PROC_INFO
1260 printk("sym_user_command: target=%ld\n", target);
1261 #endif
1262                 }
1263                 break;
1264         }
1265
1266         switch(uc->cmd) {
1267         case UC_SETVERBOSE:
1268         case UC_SETSYNC:
1269         case UC_SETTAGS:
1270         case UC_SETWIDE:
1271                 SKIP_SPACES(ptr, len);
1272                 GET_INT_ARG(ptr, len, uc->data);
1273 #ifdef DEBUG_PROC_INFO
1274 printk("sym_user_command: data=%ld\n", uc->data);
1275 #endif
1276                 break;
1277 #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT
1278         case UC_SETDEBUG:
1279                 while (len > 0) {
1280                         SKIP_SPACES(ptr, len);
1281                         if      ((arg_len = is_keyword(ptr, len, "alloc")))
1282                                 uc->data |= DEBUG_ALLOC;
1283                         else if ((arg_len = is_keyword(ptr, len, "phase")))
1284                                 uc->data |= DEBUG_PHASE;
1285                         else if ((arg_len = is_keyword(ptr, len, "queue")))
1286                                 uc->data |= DEBUG_QUEUE;
1287                         else if ((arg_len = is_keyword(ptr, len, "result")))
1288                                 uc->data |= DEBUG_RESULT;
1289                         else if ((arg_len = is_keyword(ptr, len, "scatter")))
1290                                 uc->data |= DEBUG_SCATTER;
1291                         else if ((arg_len = is_keyword(ptr, len, "script")))
1292                                 uc->data |= DEBUG_SCRIPT;
1293                         else if ((arg_len = is_keyword(ptr, len, "tiny")))
1294                                 uc->data |= DEBUG_TINY;
1295                         else if ((arg_len = is_keyword(ptr, len, "timing")))
1296                                 uc->data |= DEBUG_TIMING;
1297                         else if ((arg_len = is_keyword(ptr, len, "nego")))
1298                                 uc->data |= DEBUG_NEGO;
1299                         else if ((arg_len = is_keyword(ptr, len, "tags")))
1300                                 uc->data |= DEBUG_TAGS;
1301                         else if ((arg_len = is_keyword(ptr, len, "pointer")))
1302                                 uc->data |= DEBUG_POINTER;
1303                         else
1304                                 return -EINVAL;
1305                         ptr += arg_len; len -= arg_len;
1306                 }
1307 #ifdef DEBUG_PROC_INFO
1308 printk("sym_user_command: data=%ld\n", uc->data);
1309 #endif
1310                 break;
1311 #endif /* SYM_LINUX_DEBUG_CONTROL_SUPPORT */
1312         case UC_SETFLAG:
1313                 while (len > 0) {
1314                         SKIP_SPACES(ptr, len);
1315                         if      ((arg_len = is_keyword(ptr, len, "no_disc")))
1316                                 uc->data &= ~SYM_DISC_ENABLED;
1317                         else
1318                                 return -EINVAL;
1319                         ptr += arg_len; len -= arg_len;
1320                 }
1321                 break;
1322         default:
1323                 break;
1324         }
1325
1326         if (len)
1327                 return -EINVAL;
1328         else {
1329                 unsigned long flags;
1330
1331                 spin_lock_irqsave(np->s.host->host_lock, flags);
1332                 sym_exec_user_command (np, uc);
1333                 spin_unlock_irqrestore(np->s.host->host_lock, flags);
1334         }
1335         return length;
1336 }
1337
1338 #endif  /* SYM_LINUX_USER_COMMAND_SUPPORT */
1339
1340
1341 #ifdef SYM_LINUX_USER_INFO_SUPPORT
1342 /*
1343  *  Informations through the proc file system.
1344  */
1345 struct info_str {
1346         char *buffer;
1347         int length;
1348         int offset;
1349         int pos;
1350 };
1351
1352 static void copy_mem_info(struct info_str *info, char *data, int len)
1353 {
1354         if (info->pos + len > info->length)
1355                 len = info->length - info->pos;
1356
1357         if (info->pos + len < info->offset) {
1358                 info->pos += len;
1359                 return;
1360         }
1361         if (info->pos < info->offset) {
1362                 data += (info->offset - info->pos);
1363                 len  -= (info->offset - info->pos);
1364         }
1365
1366         if (len > 0) {
1367                 memcpy(info->buffer + info->pos, data, len);
1368                 info->pos += len;
1369         }
1370 }
1371
1372 static int copy_info(struct info_str *info, char *fmt, ...)
1373 {
1374         va_list args;
1375         char buf[81];
1376         int len;
1377
1378         va_start(args, fmt);
1379         len = vsprintf(buf, fmt, args);
1380         va_end(args);
1381
1382         copy_mem_info(info, buf, len);
1383         return len;
1384 }
1385
1386 /*
1387  *  Copy formatted information into the input buffer.
1388  */
1389 static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len)
1390 {
1391         struct info_str info;
1392
1393         info.buffer     = ptr;
1394         info.length     = len;
1395         info.offset     = offset;
1396         info.pos        = 0;
1397
1398         copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
1399                          "revision id 0x%x\n",
1400                          np->s.chip_name, np->device_id, np->revision_id);
1401         copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n",
1402                 pci_name(np->s.device), IRQ_PRM(np->s.irq));
1403         copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
1404                          (int) (np->minsync_dt ? np->minsync_dt : np->minsync),
1405                          np->maxwide ? "Wide" : "Narrow",
1406                          np->minsync_dt ? ", DT capable" : "");
1407
1408         copy_info(&info, "Max. started commands %d, "
1409                          "max. commands per LUN %d\n",
1410                          SYM_CONF_MAX_START, SYM_CONF_MAX_TAG);
1411
1412         return info.pos > info.offset? info.pos - info.offset : 0;
1413 }
1414 #endif /* SYM_LINUX_USER_INFO_SUPPORT */
1415
1416 /*
1417  *  Entry point of the scsi proc fs of the driver.
1418  *  - func = 0 means read  (returns adapter infos)
1419  *  - func = 1 means write (not yet merget from sym53c8xx)
1420  */
1421 static int sym53c8xx_proc_info(struct Scsi_Host *host, char *buffer,
1422                         char **start, off_t offset, int length, int func)
1423 {
1424         struct sym_hcb *np = sym_get_hcb(host);
1425         int retv;
1426
1427         if (func) {
1428 #ifdef  SYM_LINUX_USER_COMMAND_SUPPORT
1429                 retv = sym_user_command(np, buffer, length);
1430 #else
1431                 retv = -EINVAL;
1432 #endif
1433         } else {
1434                 if (start)
1435                         *start = buffer;
1436 #ifdef SYM_LINUX_USER_INFO_SUPPORT
1437                 retv = sym_host_info(np, buffer, offset, length);
1438 #else
1439                 retv = -EINVAL;
1440 #endif
1441         }
1442
1443         return retv;
1444 }
1445 #endif /* SYM_LINUX_PROC_INFO_SUPPORT */
1446
1447 /*
1448  *      Free controller resources.
1449  */
1450 static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev)
1451 {
1452         /*
1453          *  Free O/S specific resources.
1454          */
1455         if (np->s.irq)
1456                 free_irq(np->s.irq, np);
1457         if (np->s.ioaddr)
1458                 pci_iounmap(pdev, np->s.ioaddr);
1459         if (np->s.ramaddr)
1460                 pci_iounmap(pdev, np->s.ramaddr);
1461         /*
1462          *  Free O/S independent resources.
1463          */
1464         sym_hcb_free(np);
1465
1466         sym_mfree_dma(np, sizeof(*np), "HCB");
1467 }
1468
1469 /*
1470  *  Ask/tell the system about DMA addressing.
1471  */
1472 static int sym_setup_bus_dma_mask(struct sym_hcb *np)
1473 {
1474 #if SYM_CONF_DMA_ADDRESSING_MODE > 0
1475 #if   SYM_CONF_DMA_ADDRESSING_MODE == 1
1476 #define DMA_DAC_MASK    0x000000ffffffffffULL /* 40-bit */
1477 #elif SYM_CONF_DMA_ADDRESSING_MODE == 2
1478 #define DMA_DAC_MASK    DMA_64BIT_MASK
1479 #endif
1480         if ((np->features & FE_DAC) &&
1481                         !pci_set_dma_mask(np->s.device, DMA_DAC_MASK)) {
1482                 np->use_dac = 1;
1483                 return 0;
1484         }
1485 #endif
1486
1487         if (!pci_set_dma_mask(np->s.device, DMA_32BIT_MASK))
1488                 return 0;
1489
1490         printf_warning("%s: No suitable DMA available\n", sym_name(np));
1491         return -1;
1492 }
1493
1494 /*
1495  *  Host attach and initialisations.
1496  *
1497  *  Allocate host data and ncb structure.
1498  *  Remap MMIO region.
1499  *  Do chip initialization.
1500  *  If all is OK, install interrupt handling and
1501  *  start the timer daemon.
1502  */
1503 static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
1504                 int unit, struct sym_device *dev)
1505 {
1506         struct host_data *host_data;
1507         struct sym_hcb *np = NULL;
1508         struct Scsi_Host *instance = NULL;
1509         struct pci_dev *pdev = dev->pdev;
1510         unsigned long flags;
1511         struct sym_fw *fw;
1512
1513         printk(KERN_INFO
1514                 "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
1515                 unit, dev->chip.name, dev->chip.revision_id,
1516                 pci_name(pdev), IRQ_PRM(pdev->irq));
1517
1518         /*
1519          *  Get the firmware for this chip.
1520          */
1521         fw = sym_find_firmware(&dev->chip);
1522         if (!fw)
1523                 goto attach_failed;
1524
1525         /*
1526          *      Allocate host_data structure
1527          */
1528         instance = scsi_host_alloc(tpnt, sizeof(*host_data));
1529         if (!instance)
1530                 goto attach_failed;
1531         host_data = (struct host_data *) instance->hostdata;
1532
1533         /*
1534          *  Allocate immediately the host control block, 
1535          *  since we are only expecting to succeed. :)
1536          *  We keep track in the HCB of all the resources that 
1537          *  are to be released on error.
1538          */
1539         np = __sym_calloc_dma(&pdev->dev, sizeof(*np), "HCB");
1540         if (!np)
1541                 goto attach_failed;
1542         np->s.device = pdev;
1543         np->bus_dmat = &pdev->dev; /* Result in 1 DMA pool per HBA */
1544         host_data->ncb = np;
1545         np->s.host = instance;
1546
1547         pci_set_drvdata(pdev, np);
1548
1549         /*
1550          *  Copy some useful infos to the HCB.
1551          */
1552         np->hcb_ba      = vtobus(np);
1553         np->verbose     = sym_driver_setup.verbose;
1554         np->s.device    = pdev;
1555         np->s.unit      = unit;
1556         np->device_id   = dev->chip.device_id;
1557         np->revision_id = dev->chip.revision_id;
1558         np->features    = dev->chip.features;
1559         np->clock_divn  = dev->chip.nr_divisor;
1560         np->maxoffs     = dev->chip.offset_max;
1561         np->maxburst    = dev->chip.burst_max;
1562         np->myaddr      = dev->host_id;
1563
1564         /*
1565          *  Edit its name.
1566          */
1567         strlcpy(np->s.chip_name, dev->chip.name, sizeof(np->s.chip_name));
1568         sprintf(np->s.inst_name, "sym%d", np->s.unit);
1569
1570         if (sym_setup_bus_dma_mask(np))
1571                 goto attach_failed;
1572
1573         /*
1574          *  Try to map the controller chip to
1575          *  virtual and physical memory.
1576          */
1577         np->mmio_ba = (u32)dev->mmio_base;
1578         np->s.ioaddr    = dev->s.ioaddr;
1579         np->s.ramaddr   = dev->s.ramaddr;
1580         np->s.io_ws = (np->features & FE_IO256) ? 256 : 128;
1581
1582         /*
1583          *  Map on-chip RAM if present and supported.
1584          */
1585         if (!(np->features & FE_RAM))
1586                 dev->ram_base = 0;
1587         if (dev->ram_base) {
1588                 np->ram_ba = (u32)dev->ram_base;
1589                 np->ram_ws = (np->features & FE_RAM8K) ? 8192 : 4096;
1590         }
1591
1592         if (sym_hcb_attach(instance, fw, dev->nvram))
1593                 goto attach_failed;
1594
1595         /*
1596          *  Install the interrupt handler.
1597          *  If we synchonize the C code with SCRIPTS on interrupt, 
1598          *  we do not want to share the INTR line at all.
1599          */
1600         if (request_irq(pdev->irq, sym53c8xx_intr, SA_SHIRQ, NAME53C8XX, np)) {
1601                 printf_err("%s: request irq %d failure\n",
1602                         sym_name(np), pdev->irq);
1603                 goto attach_failed;
1604         }
1605         np->s.irq = pdev->irq;
1606
1607         /*
1608          *  After SCSI devices have been opened, we cannot
1609          *  reset the bus safely, so we do it here.
1610          */
1611         spin_lock_irqsave(instance->host_lock, flags);
1612         if (sym_reset_scsi_bus(np, 0))
1613                 goto reset_failed;
1614
1615         /*
1616          *  Start the SCRIPTS.
1617          */
1618         sym_start_up (np, 1);
1619
1620         /*
1621          *  Start the timer daemon
1622          */
1623         init_timer(&np->s.timer);
1624         np->s.timer.data     = (unsigned long) np;
1625         np->s.timer.function = sym53c8xx_timer;
1626         np->s.lasttime=0;
1627         sym_timer (np);
1628
1629         /*
1630          *  Fill Linux host instance structure
1631          *  and return success.
1632          */
1633         instance->max_channel   = 0;
1634         instance->this_id       = np->myaddr;
1635         instance->max_id        = np->maxwide ? 16 : 8;
1636         instance->max_lun       = SYM_CONF_MAX_LUN;
1637         instance->unique_id     = pci_resource_start(pdev, 0);
1638         instance->cmd_per_lun   = SYM_CONF_MAX_TAG;
1639         instance->can_queue     = (SYM_CONF_MAX_START-2);
1640         instance->sg_tablesize  = SYM_CONF_MAX_SG;
1641         instance->max_cmd_len   = 16;
1642         BUG_ON(sym2_transport_template == NULL);
1643         instance->transportt    = sym2_transport_template;
1644
1645         spin_unlock_irqrestore(instance->host_lock, flags);
1646
1647         return instance;
1648
1649  reset_failed:
1650         printf_err("%s: FATAL ERROR: CHECK SCSI BUS - CABLES, "
1651                    "TERMINATION, DEVICE POWER etc.!\n", sym_name(np));
1652         spin_unlock_irqrestore(instance->host_lock, flags);
1653  attach_failed:
1654         if (!instance)
1655                 return NULL;
1656         printf_info("%s: giving up ...\n", sym_name(np));
1657         if (np)
1658                 sym_free_resources(np, pdev);
1659         scsi_host_put(instance);
1660
1661         return NULL;
1662  }
1663
1664
1665 /*
1666  *    Detect and try to read SYMBIOS and TEKRAM NVRAM.
1667  */
1668 #if SYM_CONF_NVRAM_SUPPORT
1669 static void __devinit sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp)
1670 {
1671         devp->nvram = nvp;
1672         devp->device_id = devp->chip.device_id;
1673         nvp->type = 0;
1674
1675         sym_read_nvram(devp, nvp);
1676 }
1677 #else
1678 static inline void sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp)
1679 {
1680 }
1681 #endif  /* SYM_CONF_NVRAM_SUPPORT */
1682
1683 static int __devinit sym_check_supported(struct sym_device *device)
1684 {
1685         struct sym_chip *chip;
1686         struct pci_dev *pdev = device->pdev;
1687         u_char revision;
1688         unsigned long io_port = pci_resource_start(pdev, 0);
1689         int i;
1690
1691         /*
1692          *  If user excluded this chip, do not initialize it.
1693          *  I hate this code so much.  Must kill it.
1694          */
1695         if (io_port) {
1696                 for (i = 0 ; i < 8 ; i++) {
1697                         if (sym_driver_setup.excludes[i] == io_port)
1698                                 return -ENODEV;
1699                 }
1700         }
1701
1702         /*
1703          * Check if the chip is supported.  Then copy the chip description
1704          * to our device structure so we can make it match the actual device
1705          * and options.
1706          */
1707         pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
1708         chip = sym_lookup_chip_table(pdev->device, revision);
1709         if (!chip) {
1710                 dev_info(&pdev->dev, "device not supported\n");
1711                 return -ENODEV;
1712         }
1713         memcpy(&device->chip, chip, sizeof(device->chip));
1714         device->chip.revision_id = revision;
1715
1716         return 0;
1717 }
1718
1719 /*
1720  * Ignore Symbios chips controlled by various RAID controllers.
1721  * These controllers set value 0x52414944 at RAM end - 16.
1722  */
1723 static int __devinit sym_check_raid(struct sym_device *device)
1724 {
1725         unsigned int ram_size, ram_val;
1726
1727         if (!device->s.ramaddr)
1728                 return 0;
1729
1730         if (device->chip.features & FE_RAM8K)
1731                 ram_size = 8192;
1732         else
1733                 ram_size = 4096;
1734
1735         ram_val = readl(device->s.ramaddr + ram_size - 16);
1736         if (ram_val != 0x52414944)
1737                 return 0;
1738
1739         dev_info(&device->pdev->dev,
1740                         "not initializing, driven by RAID controller.\n");
1741         return -ENODEV;
1742 }
1743
1744 static int __devinit sym_set_workarounds(struct sym_device *device)
1745 {
1746         struct sym_chip *chip = &device->chip;
1747         struct pci_dev *pdev = device->pdev;
1748         u_short status_reg;
1749
1750         /*
1751          *  (ITEM 12 of a DEL about the 896 I haven't yet).
1752          *  We must ensure the chip will use WRITE AND INVALIDATE.
1753          *  The revision number limit is for now arbitrary.
1754          */
1755         if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && chip->revision_id < 0x4) {
1756                 chip->features  |= (FE_WRIE | FE_CLSE);
1757         }
1758
1759         /* If the chip can do Memory Write Invalidate, enable it */
1760         if (chip->features & FE_WRIE) {
1761                 if (pci_set_mwi(pdev))
1762                         return -ENODEV;
1763         }
1764
1765         /*
1766          *  Work around for errant bit in 895A. The 66Mhz
1767          *  capable bit is set erroneously. Clear this bit.
1768          *  (Item 1 DEL 533)
1769          *
1770          *  Make sure Config space and Features agree.
1771          *
1772          *  Recall: writes are not normal to status register -
1773          *  write a 1 to clear and a 0 to leave unchanged.
1774          *  Can only reset bits.
1775          */
1776         pci_read_config_word(pdev, PCI_STATUS, &status_reg);
1777         if (chip->features & FE_66MHZ) {
1778                 if (!(status_reg & PCI_STATUS_66MHZ))
1779                         chip->features &= ~FE_66MHZ;
1780         } else {
1781                 if (status_reg & PCI_STATUS_66MHZ) {
1782                         status_reg = PCI_STATUS_66MHZ;
1783                         pci_write_config_word(pdev, PCI_STATUS, status_reg);
1784                         pci_read_config_word(pdev, PCI_STATUS, &status_reg);
1785                 }
1786         }
1787
1788         return 0;
1789 }
1790
1791 /*
1792  *  Read and check the PCI configuration for any detected NCR 
1793  *  boards and save data for attaching after all boards have 
1794  *  been detected.
1795  */
1796 static void __devinit
1797 sym_init_device(struct pci_dev *pdev, struct sym_device *device)
1798 {
1799         int i;
1800
1801         device->host_id = SYM_SETUP_HOST_ID;
1802         device->pdev = pdev;
1803
1804         i = pci_get_base_address(pdev, 1, &device->mmio_base);
1805         pci_get_base_address(pdev, i, &device->ram_base);
1806
1807 #ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED
1808         if (device->mmio_base)
1809                 device->s.ioaddr = pci_iomap(pdev, 1,
1810                                                 pci_resource_len(pdev, 1));
1811 #endif
1812         if (!device->s.ioaddr)
1813                 device->s.ioaddr = pci_iomap(pdev, 0,
1814                                                 pci_resource_len(pdev, 0));
1815         if (device->ram_base)
1816                 device->s.ramaddr = pci_iomap(pdev, i,
1817                                                 pci_resource_len(pdev, i));
1818 }
1819
1820 /*
1821  * The NCR PQS and PDS cards are constructed as a DEC bridge
1822  * behind which sits a proprietary NCR memory controller and
1823  * either four or two 53c875s as separate devices.  We can tell
1824  * if an 875 is part of a PQS/PDS or not since if it is, it will
1825  * be on the same bus as the memory controller.  In its usual
1826  * mode of operation, the 875s are slaved to the memory
1827  * controller for all transfers.  To operate with the Linux
1828  * driver, the memory controller is disabled and the 875s
1829  * freed to function independently.  The only wrinkle is that
1830  * the preset SCSI ID (which may be zero) must be read in from
1831  * a special configuration space register of the 875.
1832  */
1833 static void sym_config_pqs(struct pci_dev *pdev, struct sym_device *sym_dev)
1834 {
1835         int slot;
1836         u8 tmp;
1837
1838         for (slot = 0; slot < 256; slot++) {
1839                 struct pci_dev *memc = pci_get_slot(pdev->bus, slot);
1840
1841                 if (!memc || memc->vendor != 0x101a || memc->device == 0x0009) {
1842                         pci_dev_put(memc);
1843                         continue;
1844                 }
1845
1846                 /* bit 1: allow individual 875 configuration */
1847                 pci_read_config_byte(memc, 0x44, &tmp);
1848                 if ((tmp & 0x2) == 0) {
1849                         tmp |= 0x2;
1850                         pci_write_config_byte(memc, 0x44, tmp);
1851                 }
1852
1853                 /* bit 2: drive individual 875 interrupts to the bus */
1854                 pci_read_config_byte(memc, 0x45, &tmp);
1855                 if ((tmp & 0x4) == 0) {
1856                         tmp |= 0x4;
1857                         pci_write_config_byte(memc, 0x45, tmp);
1858                 }
1859
1860                 pci_dev_put(memc);
1861                 break;
1862         }
1863
1864         pci_read_config_byte(pdev, 0x84, &tmp);
1865         sym_dev->host_id = tmp;
1866 }
1867
1868 /*
1869  *  Called before unloading the module.
1870  *  Detach the host.
1871  *  We have to free resources and halt the NCR chip.
1872  */
1873 static int sym_detach(struct sym_hcb *np, struct pci_dev *pdev)
1874 {
1875         printk("%s: detaching ...\n", sym_name(np));
1876
1877         del_timer_sync(&np->s.timer);
1878
1879         /*
1880          * Reset NCR chip.
1881          * We should use sym_soft_reset(), but we don't want to do 
1882          * so, since we may not be safe if interrupts occur.
1883          */
1884         printk("%s: resetting chip\n", sym_name(np));
1885         OUTB(np, nc_istat, SRST);
1886         INB(np, nc_mbox1);
1887         udelay(10);
1888         OUTB(np, nc_istat, 0);
1889
1890         sym_free_resources(np, pdev);
1891
1892         return 1;
1893 }
1894
1895 /*
1896  * Driver host template.
1897  */
1898 static struct scsi_host_template sym2_template = {
1899         .module                 = THIS_MODULE,
1900         .name                   = "sym53c8xx",
1901         .info                   = sym53c8xx_info, 
1902         .queuecommand           = sym53c8xx_queue_command,
1903         .slave_alloc            = sym53c8xx_slave_alloc,
1904         .slave_configure        = sym53c8xx_slave_configure,
1905         .eh_abort_handler       = sym53c8xx_eh_abort_handler,
1906         .eh_device_reset_handler = sym53c8xx_eh_device_reset_handler,
1907         .eh_bus_reset_handler   = sym53c8xx_eh_bus_reset_handler,
1908         .eh_host_reset_handler  = sym53c8xx_eh_host_reset_handler,
1909         .this_id                = 7,
1910         .use_clustering         = DISABLE_CLUSTERING,
1911 #ifdef SYM_LINUX_PROC_INFO_SUPPORT
1912         .proc_info              = sym53c8xx_proc_info,
1913         .proc_name              = NAME53C8XX,
1914 #endif
1915 };
1916
1917 static int attach_count;
1918
1919 static int __devinit sym2_probe(struct pci_dev *pdev,
1920                                 const struct pci_device_id *ent)
1921 {
1922         struct sym_device sym_dev;
1923         struct sym_nvram nvram;
1924         struct Scsi_Host *instance;
1925
1926         memset(&sym_dev, 0, sizeof(sym_dev));
1927         memset(&nvram, 0, sizeof(nvram));
1928
1929         if (pci_enable_device(pdev))
1930                 goto leave;
1931
1932         pci_set_master(pdev);
1933
1934         if (pci_request_regions(pdev, NAME53C8XX))
1935                 goto disable;
1936
1937         sym_init_device(pdev, &sym_dev);
1938         if (sym_check_supported(&sym_dev))
1939                 goto free;
1940
1941         if (sym_check_raid(&sym_dev))
1942                 goto leave;     /* Don't disable the device */
1943
1944         if (sym_set_workarounds(&sym_dev))
1945                 goto free;
1946
1947         sym_config_pqs(pdev, &sym_dev);
1948
1949         sym_get_nvram(&sym_dev, &nvram);
1950
1951         instance = sym_attach(&sym2_template, attach_count, &sym_dev);
1952         if (!instance)
1953                 goto free;
1954
1955         if (scsi_add_host(instance, &pdev->dev))
1956                 goto detach;
1957         scsi_scan_host(instance);
1958
1959         attach_count++;
1960
1961         return 0;
1962
1963  detach:
1964         sym_detach(pci_get_drvdata(pdev), pdev);
1965  free:
1966         pci_release_regions(pdev);
1967  disable:
1968         pci_disable_device(pdev);
1969  leave:
1970         return -ENODEV;
1971 }
1972
1973 static void __devexit sym2_remove(struct pci_dev *pdev)
1974 {
1975         struct sym_hcb *np = pci_get_drvdata(pdev);
1976         struct Scsi_Host *host = np->s.host;
1977
1978         scsi_remove_host(host);
1979         scsi_host_put(host);
1980
1981         sym_detach(np, pdev);
1982
1983         pci_release_regions(pdev);
1984         pci_disable_device(pdev);
1985
1986         attach_count--;
1987 }
1988
1989 static void sym2_get_signalling(struct Scsi_Host *shost)
1990 {
1991         struct sym_hcb *np = sym_get_hcb(shost);
1992         enum spi_signal_type type;
1993
1994         switch (np->scsi_mode) {
1995         case SMODE_SE:
1996                 type = SPI_SIGNAL_SE;
1997                 break;
1998         case SMODE_LVD:
1999                 type = SPI_SIGNAL_LVD;
2000                 break;
2001         case SMODE_HVD:
2002                 type = SPI_SIGNAL_HVD;
2003                 break;
2004         default:
2005                 type = SPI_SIGNAL_UNKNOWN;
2006                 break;
2007         }
2008         spi_signalling(shost) = type;
2009 }
2010
2011 static void sym2_set_offset(struct scsi_target *starget, int offset)
2012 {
2013         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2014         struct sym_hcb *np = sym_get_hcb(shost);
2015         struct sym_tcb *tp = &np->target[starget->id];
2016
2017         tp->tgoal.offset = offset;
2018         tp->tgoal.check_nego = 1;
2019 }
2020
2021 static void sym2_set_period(struct scsi_target *starget, int period)
2022 {
2023         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2024         struct sym_hcb *np = sym_get_hcb(shost);
2025         struct sym_tcb *tp = &np->target[starget->id];
2026
2027         /* have to have DT for these transfers, but DT will also
2028          * set width, so check that this is allowed */
2029         if (period <= np->minsync && spi_width(starget))
2030                 tp->tgoal.dt = 1;
2031
2032         tp->tgoal.period = period;
2033         tp->tgoal.check_nego = 1;
2034 }
2035
2036 static void sym2_set_width(struct scsi_target *starget, int width)
2037 {
2038         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2039         struct sym_hcb *np = sym_get_hcb(shost);
2040         struct sym_tcb *tp = &np->target[starget->id];
2041
2042         /* It is illegal to have DT set on narrow transfers.  If DT is
2043          * clear, we must also clear IU and QAS.  */
2044         if (width == 0)
2045                 tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
2046
2047         tp->tgoal.width = width;
2048         tp->tgoal.check_nego = 1;
2049 }
2050
2051 static void sym2_set_dt(struct scsi_target *starget, int dt)
2052 {
2053         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2054         struct sym_hcb *np = sym_get_hcb(shost);
2055         struct sym_tcb *tp = &np->target[starget->id];
2056
2057         /* We must clear QAS and IU if DT is clear */
2058         if (dt)
2059                 tp->tgoal.dt = 1;
2060         else
2061                 tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
2062         tp->tgoal.check_nego = 1;
2063 }
2064
2065 static void sym2_set_iu(struct scsi_target *starget, int iu)
2066 {
2067         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2068         struct sym_hcb *np = sym_get_hcb(shost);
2069         struct sym_tcb *tp = &np->target[starget->id];
2070
2071         if (iu)
2072                 tp->tgoal.iu = tp->tgoal.dt = 1;
2073         else
2074                 tp->tgoal.iu = 0;
2075         tp->tgoal.check_nego = 1;
2076 }
2077
2078 static void sym2_set_qas(struct scsi_target *starget, int qas)
2079 {
2080         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2081         struct sym_hcb *np = sym_get_hcb(shost);
2082         struct sym_tcb *tp = &np->target[starget->id];
2083
2084         if (qas)
2085                 tp->tgoal.dt = tp->tgoal.qas = 1;
2086         else
2087                 tp->tgoal.qas = 0;
2088         tp->tgoal.check_nego = 1;
2089 }
2090
2091
2092 static struct spi_function_template sym2_transport_functions = {
2093         .set_offset     = sym2_set_offset,
2094         .show_offset    = 1,
2095         .set_period     = sym2_set_period,
2096         .show_period    = 1,
2097         .set_width      = sym2_set_width,
2098         .show_width     = 1,
2099         .set_dt         = sym2_set_dt,
2100         .show_dt        = 1,
2101         .set_iu         = sym2_set_iu,
2102         .show_iu        = 1,
2103         .set_qas        = sym2_set_qas,
2104         .show_qas       = 1,
2105         .get_signalling = sym2_get_signalling,
2106 };
2107
2108 static struct pci_device_id sym2_id_table[] __devinitdata = {
2109         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C810,
2110           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2111         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C820,
2112           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */
2113         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C825,
2114           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2115         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C815,
2116           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2117         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C810AP,
2118           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */
2119         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C860,
2120           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2121         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510,
2122           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2123         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896,
2124           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2125         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895,
2126           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2127         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C885,
2128           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2129         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C875,
2130           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2131         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C1510,
2132           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */
2133         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C895A,
2134           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2135         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C875A,
2136           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2137         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1010_33,
2138           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2139         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1010_66,
2140           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2141         { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C875J,
2142           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
2143         { 0, }
2144 };
2145
2146 MODULE_DEVICE_TABLE(pci, sym2_id_table);
2147
2148 static struct pci_driver sym2_driver = {
2149         .name           = NAME53C8XX,
2150         .id_table       = sym2_id_table,
2151         .probe          = sym2_probe,
2152         .remove         = __devexit_p(sym2_remove),
2153 };
2154
2155 static int __init sym2_init(void)
2156 {
2157         int error;
2158
2159         sym2_setup_params();
2160         sym2_transport_template = spi_attach_transport(&sym2_transport_functions);
2161         if (!sym2_transport_template)
2162                 return -ENODEV;
2163
2164         error = pci_register_driver(&sym2_driver);
2165         if (error)
2166                 spi_release_transport(sym2_transport_template);
2167         return error;
2168 }
2169
2170 static void __exit sym2_exit(void)
2171 {
2172         pci_unregister_driver(&sym2_driver);
2173         spi_release_transport(sym2_transport_template);
2174 }
2175
2176 module_init(sym2_init);
2177 module_exit(sym2_exit);