]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - drivers/net/cxgb3/sge.c
Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6
[linux-2.6.git] / drivers / net / cxgb3 / sge.c
1 /*
2  * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  */
32 #include <linux/skbuff.h>
33 #include <linux/netdevice.h>
34 #include <linux/etherdevice.h>
35 #include <linux/if_vlan.h>
36 #include <linux/ip.h>
37 #include <linux/tcp.h>
38 #include <linux/dma-mapping.h>
39 #include "common.h"
40 #include "regs.h"
41 #include "sge_defs.h"
42 #include "t3_cpl.h"
43 #include "firmware_exports.h"
44
45 #define USE_GTS 0
46
47 #define SGE_RX_SM_BUF_SIZE 1536
48
49 #define SGE_RX_COPY_THRES  256
50 #define SGE_RX_PULL_LEN    128
51
52 /*
53  * Page chunk size for FL0 buffers if FL0 is to be populated with page chunks.
54  * It must be a divisor of PAGE_SIZE.  If set to 0 FL0 will use sk_buffs
55  * directly.
56  */
57 #define FL0_PG_CHUNK_SIZE  2048
58
59 #define SGE_RX_DROP_THRES 16
60
61 /*
62  * Period of the Tx buffer reclaim timer.  This timer does not need to run
63  * frequently as Tx buffers are usually reclaimed by new Tx packets.
64  */
65 #define TX_RECLAIM_PERIOD (HZ / 4)
66
67 /* WR size in bytes */
68 #define WR_LEN (WR_FLITS * 8)
69
70 /*
71  * Types of Tx queues in each queue set.  Order here matters, do not change.
72  */
73 enum { TXQ_ETH, TXQ_OFLD, TXQ_CTRL };
74
75 /* Values for sge_txq.flags */
76 enum {
77         TXQ_RUNNING = 1 << 0,   /* fetch engine is running */
78         TXQ_LAST_PKT_DB = 1 << 1,       /* last packet rang the doorbell */
79 };
80
81 struct tx_desc {
82         __be64 flit[TX_DESC_FLITS];
83 };
84
85 struct rx_desc {
86         __be32 addr_lo;
87         __be32 len_gen;
88         __be32 gen2;
89         __be32 addr_hi;
90 };
91
92 struct tx_sw_desc {             /* SW state per Tx descriptor */
93         struct sk_buff *skb;
94 };
95
96 struct rx_sw_desc {                /* SW state per Rx descriptor */
97         union {
98                 struct sk_buff *skb;
99                 struct fl_pg_chunk pg_chunk;
100         };
101         DECLARE_PCI_UNMAP_ADDR(dma_addr);
102 };
103
104 struct rsp_desc {               /* response queue descriptor */
105         struct rss_header rss_hdr;
106         __be32 flags;
107         __be32 len_cq;
108         u8 imm_data[47];
109         u8 intr_gen;
110 };
111
112 struct unmap_info {             /* packet unmapping info, overlays skb->cb */
113         int sflit;              /* start flit of first SGL entry in Tx descriptor */
114         u16 fragidx;            /* first page fragment in current Tx descriptor */
115         u16 addr_idx;           /* buffer index of first SGL entry in descriptor */
116         u32 len;                /* mapped length of skb main body */
117 };
118
119 /*
120  * Holds unmapping information for Tx packets that need deferred unmapping.
121  * This structure lives at skb->head and must be allocated by callers.
122  */
123 struct deferred_unmap_info {
124         struct pci_dev *pdev;
125         dma_addr_t addr[MAX_SKB_FRAGS + 1];
126 };
127
128 /*
129  * Maps a number of flits to the number of Tx descriptors that can hold them.
130  * The formula is
131  *
132  * desc = 1 + (flits - 2) / (WR_FLITS - 1).
133  *
134  * HW allows up to 4 descriptors to be combined into a WR.
135  */
136 static u8 flit_desc_map[] = {
137         0,
138 #if SGE_NUM_GENBITS == 1
139         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
140         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
141         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
142         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
143 #elif SGE_NUM_GENBITS == 2
144         1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
145         2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
146         3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
147         4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
148 #else
149 # error "SGE_NUM_GENBITS must be 1 or 2"
150 #endif
151 };
152
153 static inline struct sge_qset *fl_to_qset(const struct sge_fl *q, int qidx)
154 {
155         return container_of(q, struct sge_qset, fl[qidx]);
156 }
157
158 static inline struct sge_qset *rspq_to_qset(const struct sge_rspq *q)
159 {
160         return container_of(q, struct sge_qset, rspq);
161 }
162
163 static inline struct sge_qset *txq_to_qset(const struct sge_txq *q, int qidx)
164 {
165         return container_of(q, struct sge_qset, txq[qidx]);
166 }
167
168 /**
169  *      refill_rspq - replenish an SGE response queue
170  *      @adapter: the adapter
171  *      @q: the response queue to replenish
172  *      @credits: how many new responses to make available
173  *
174  *      Replenishes a response queue by making the supplied number of responses
175  *      available to HW.
176  */
177 static inline void refill_rspq(struct adapter *adapter,
178                                const struct sge_rspq *q, unsigned int credits)
179 {
180         t3_write_reg(adapter, A_SG_RSPQ_CREDIT_RETURN,
181                      V_RSPQ(q->cntxt_id) | V_CREDITS(credits));
182 }
183
184 /**
185  *      need_skb_unmap - does the platform need unmapping of sk_buffs?
186  *
187  *      Returns true if the platfrom needs sk_buff unmapping.  The compiler
188  *      optimizes away unecessary code if this returns true.
189  */
190 static inline int need_skb_unmap(void)
191 {
192         /*
193          * This structure is used to tell if the platfrom needs buffer
194          * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
195          */
196         struct dummy {
197                 DECLARE_PCI_UNMAP_ADDR(addr);
198         };
199
200         return sizeof(struct dummy) != 0;
201 }
202
203 /**
204  *      unmap_skb - unmap a packet main body and its page fragments
205  *      @skb: the packet
206  *      @q: the Tx queue containing Tx descriptors for the packet
207  *      @cidx: index of Tx descriptor
208  *      @pdev: the PCI device
209  *
210  *      Unmap the main body of an sk_buff and its page fragments, if any.
211  *      Because of the fairly complicated structure of our SGLs and the desire
212  *      to conserve space for metadata, we keep the information necessary to
213  *      unmap an sk_buff partly in the sk_buff itself (in its cb), and partly
214  *      in the Tx descriptors (the physical addresses of the various data
215  *      buffers).  The send functions initialize the state in skb->cb so we
216  *      can unmap the buffers held in the first Tx descriptor here, and we
217  *      have enough information at this point to update the state for the next
218  *      Tx descriptor.
219  */
220 static inline void unmap_skb(struct sk_buff *skb, struct sge_txq *q,
221                              unsigned int cidx, struct pci_dev *pdev)
222 {
223         const struct sg_ent *sgp;
224         struct unmap_info *ui = (struct unmap_info *)skb->cb;
225         int nfrags, frag_idx, curflit, j = ui->addr_idx;
226
227         sgp = (struct sg_ent *)&q->desc[cidx].flit[ui->sflit];
228
229         if (ui->len) {
230                 pci_unmap_single(pdev, be64_to_cpu(sgp->addr[0]), ui->len,
231                                  PCI_DMA_TODEVICE);
232                 ui->len = 0;    /* so we know for next descriptor for this skb */
233                 j = 1;
234         }
235
236         frag_idx = ui->fragidx;
237         curflit = ui->sflit + 1 + j;
238         nfrags = skb_shinfo(skb)->nr_frags;
239
240         while (frag_idx < nfrags && curflit < WR_FLITS) {
241                 pci_unmap_page(pdev, be64_to_cpu(sgp->addr[j]),
242                                skb_shinfo(skb)->frags[frag_idx].size,
243                                PCI_DMA_TODEVICE);
244                 j ^= 1;
245                 if (j == 0) {
246                         sgp++;
247                         curflit++;
248                 }
249                 curflit++;
250                 frag_idx++;
251         }
252
253         if (frag_idx < nfrags) {        /* SGL continues into next Tx descriptor */
254                 ui->fragidx = frag_idx;
255                 ui->addr_idx = j;
256                 ui->sflit = curflit - WR_FLITS - j;     /* sflit can be -1 */
257         }
258 }
259
260 /**
261  *      free_tx_desc - reclaims Tx descriptors and their buffers
262  *      @adapter: the adapter
263  *      @q: the Tx queue to reclaim descriptors from
264  *      @n: the number of descriptors to reclaim
265  *
266  *      Reclaims Tx descriptors from an SGE Tx queue and frees the associated
267  *      Tx buffers.  Called with the Tx queue lock held.
268  */
269 static void free_tx_desc(struct adapter *adapter, struct sge_txq *q,
270                          unsigned int n)
271 {
272         struct tx_sw_desc *d;
273         struct pci_dev *pdev = adapter->pdev;
274         unsigned int cidx = q->cidx;
275
276         const int need_unmap = need_skb_unmap() &&
277                                q->cntxt_id >= FW_TUNNEL_SGEEC_START;
278
279         d = &q->sdesc[cidx];
280         while (n--) {
281                 if (d->skb) {   /* an SGL is present */
282                         if (need_unmap)
283                                 unmap_skb(d->skb, q, cidx, pdev);
284                         if (d->skb->priority == cidx)
285                                 kfree_skb(d->skb);
286                 }
287                 ++d;
288                 if (++cidx == q->size) {
289                         cidx = 0;
290                         d = q->sdesc;
291                 }
292         }
293         q->cidx = cidx;
294 }
295
296 /**
297  *      reclaim_completed_tx - reclaims completed Tx descriptors
298  *      @adapter: the adapter
299  *      @q: the Tx queue to reclaim completed descriptors from
300  *
301  *      Reclaims Tx descriptors that the SGE has indicated it has processed,
302  *      and frees the associated buffers if possible.  Called with the Tx
303  *      queue's lock held.
304  */
305 static inline void reclaim_completed_tx(struct adapter *adapter,
306                                         struct sge_txq *q)
307 {
308         unsigned int reclaim = q->processed - q->cleaned;
309
310         if (reclaim) {
311                 free_tx_desc(adapter, q, reclaim);
312                 q->cleaned += reclaim;
313                 q->in_use -= reclaim;
314         }
315 }
316
317 /**
318  *      should_restart_tx - are there enough resources to restart a Tx queue?
319  *      @q: the Tx queue
320  *
321  *      Checks if there are enough descriptors to restart a suspended Tx queue.
322  */
323 static inline int should_restart_tx(const struct sge_txq *q)
324 {
325         unsigned int r = q->processed - q->cleaned;
326
327         return q->in_use - r < (q->size >> 1);
328 }
329
330 /**
331  *      free_rx_bufs - free the Rx buffers on an SGE free list
332  *      @pdev: the PCI device associated with the adapter
333  *      @rxq: the SGE free list to clean up
334  *
335  *      Release the buffers on an SGE free-buffer Rx queue.  HW fetching from
336  *      this queue should be stopped before calling this function.
337  */
338 static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
339 {
340         unsigned int cidx = q->cidx;
341
342         while (q->credits--) {
343                 struct rx_sw_desc *d = &q->sdesc[cidx];
344
345                 pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
346                                  q->buf_size, PCI_DMA_FROMDEVICE);
347                 if (q->use_pages) {
348                         put_page(d->pg_chunk.page);
349                         d->pg_chunk.page = NULL;
350                 } else {
351                         kfree_skb(d->skb);
352                         d->skb = NULL;
353                 }
354                 if (++cidx == q->size)
355                         cidx = 0;
356         }
357
358         if (q->pg_chunk.page) {
359                 __free_page(q->pg_chunk.page);
360                 q->pg_chunk.page = NULL;
361         }
362 }
363
364 /**
365  *      add_one_rx_buf - add a packet buffer to a free-buffer list
366  *      @va:  buffer start VA
367  *      @len: the buffer length
368  *      @d: the HW Rx descriptor to write
369  *      @sd: the SW Rx descriptor to write
370  *      @gen: the generation bit value
371  *      @pdev: the PCI device associated with the adapter
372  *
373  *      Add a buffer of the given length to the supplied HW and SW Rx
374  *      descriptors.
375  */
376 static inline void add_one_rx_buf(void *va, unsigned int len,
377                                   struct rx_desc *d, struct rx_sw_desc *sd,
378                                   unsigned int gen, struct pci_dev *pdev)
379 {
380         dma_addr_t mapping;
381
382         mapping = pci_map_single(pdev, va, len, PCI_DMA_FROMDEVICE);
383         pci_unmap_addr_set(sd, dma_addr, mapping);
384
385         d->addr_lo = cpu_to_be32(mapping);
386         d->addr_hi = cpu_to_be32((u64) mapping >> 32);
387         wmb();
388         d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
389         d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
390 }
391
392 static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp)
393 {
394         if (!q->pg_chunk.page) {
395                 q->pg_chunk.page = alloc_page(gfp);
396                 if (unlikely(!q->pg_chunk.page))
397                         return -ENOMEM;
398                 q->pg_chunk.va = page_address(q->pg_chunk.page);
399                 q->pg_chunk.offset = 0;
400         }
401         sd->pg_chunk = q->pg_chunk;
402
403         q->pg_chunk.offset += q->buf_size;
404         if (q->pg_chunk.offset == PAGE_SIZE)
405                 q->pg_chunk.page = NULL;
406         else {
407                 q->pg_chunk.va += q->buf_size;
408                 get_page(q->pg_chunk.page);
409         }
410         return 0;
411 }
412
413 /**
414  *      refill_fl - refill an SGE free-buffer list
415  *      @adapter: the adapter
416  *      @q: the free-list to refill
417  *      @n: the number of new buffers to allocate
418  *      @gfp: the gfp flags for allocating new buffers
419  *
420  *      (Re)populate an SGE free-buffer list with up to @n new packet buffers,
421  *      allocated with the supplied gfp flags.  The caller must assure that
422  *      @n does not exceed the queue's capacity.
423  */
424 static void refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
425 {
426         void *buf_start;
427         struct rx_sw_desc *sd = &q->sdesc[q->pidx];
428         struct rx_desc *d = &q->desc[q->pidx];
429
430         while (n--) {
431                 if (q->use_pages) {
432                         if (unlikely(alloc_pg_chunk(q, sd, gfp))) {
433 nomem:                          q->alloc_failed++;
434                                 break;
435                         }
436                         buf_start = sd->pg_chunk.va;
437                 } else {
438                         struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
439
440                         if (!skb)
441                                 goto nomem;
442
443                         sd->skb = skb;
444                         buf_start = skb->data;
445                 }
446
447                 add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen,
448                                adap->pdev);
449                 d++;
450                 sd++;
451                 if (++q->pidx == q->size) {
452                         q->pidx = 0;
453                         q->gen ^= 1;
454                         sd = q->sdesc;
455                         d = q->desc;
456                 }
457                 q->credits++;
458         }
459
460         t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
461 }
462
463 static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
464 {
465         refill_fl(adap, fl, min(16U, fl->size - fl->credits), GFP_ATOMIC);
466 }
467
468 /**
469  *      recycle_rx_buf - recycle a receive buffer
470  *      @adapter: the adapter
471  *      @q: the SGE free list
472  *      @idx: index of buffer to recycle
473  *
474  *      Recycles the specified buffer on the given free list by adding it at
475  *      the next available slot on the list.
476  */
477 static void recycle_rx_buf(struct adapter *adap, struct sge_fl *q,
478                            unsigned int idx)
479 {
480         struct rx_desc *from = &q->desc[idx];
481         struct rx_desc *to = &q->desc[q->pidx];
482
483         q->sdesc[q->pidx] = q->sdesc[idx];
484         to->addr_lo = from->addr_lo;    /* already big endian */
485         to->addr_hi = from->addr_hi;    /* likewise */
486         wmb();
487         to->len_gen = cpu_to_be32(V_FLD_GEN1(q->gen));
488         to->gen2 = cpu_to_be32(V_FLD_GEN2(q->gen));
489         q->credits++;
490
491         if (++q->pidx == q->size) {
492                 q->pidx = 0;
493                 q->gen ^= 1;
494         }
495         t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
496 }
497
498 /**
499  *      alloc_ring - allocate resources for an SGE descriptor ring
500  *      @pdev: the PCI device
501  *      @nelem: the number of descriptors
502  *      @elem_size: the size of each descriptor
503  *      @sw_size: the size of the SW state associated with each ring element
504  *      @phys: the physical address of the allocated ring
505  *      @metadata: address of the array holding the SW state for the ring
506  *
507  *      Allocates resources for an SGE descriptor ring, such as Tx queues,
508  *      free buffer lists, or response queues.  Each SGE ring requires
509  *      space for its HW descriptors plus, optionally, space for the SW state
510  *      associated with each HW entry (the metadata).  The function returns
511  *      three values: the virtual address for the HW ring (the return value
512  *      of the function), the physical address of the HW ring, and the address
513  *      of the SW ring.
514  */
515 static void *alloc_ring(struct pci_dev *pdev, size_t nelem, size_t elem_size,
516                         size_t sw_size, dma_addr_t * phys, void *metadata)
517 {
518         size_t len = nelem * elem_size;
519         void *s = NULL;
520         void *p = dma_alloc_coherent(&pdev->dev, len, phys, GFP_KERNEL);
521
522         if (!p)
523                 return NULL;
524         if (sw_size) {
525                 s = kcalloc(nelem, sw_size, GFP_KERNEL);
526
527                 if (!s) {
528                         dma_free_coherent(&pdev->dev, len, p, *phys);
529                         return NULL;
530                 }
531         }
532         if (metadata)
533                 *(void **)metadata = s;
534         memset(p, 0, len);
535         return p;
536 }
537
538 /**
539  *      free_qset - free the resources of an SGE queue set
540  *      @adapter: the adapter owning the queue set
541  *      @q: the queue set
542  *
543  *      Release the HW and SW resources associated with an SGE queue set, such
544  *      as HW contexts, packet buffers, and descriptor rings.  Traffic to the
545  *      queue set must be quiesced prior to calling this.
546  */
547 static void t3_free_qset(struct adapter *adapter, struct sge_qset *q)
548 {
549         int i;
550         struct pci_dev *pdev = adapter->pdev;
551
552         if (q->tx_reclaim_timer.function)
553                 del_timer_sync(&q->tx_reclaim_timer);
554
555         for (i = 0; i < SGE_RXQ_PER_SET; ++i)
556                 if (q->fl[i].desc) {
557                         spin_lock(&adapter->sge.reg_lock);
558                         t3_sge_disable_fl(adapter, q->fl[i].cntxt_id);
559                         spin_unlock(&adapter->sge.reg_lock);
560                         free_rx_bufs(pdev, &q->fl[i]);
561                         kfree(q->fl[i].sdesc);
562                         dma_free_coherent(&pdev->dev,
563                                           q->fl[i].size *
564                                           sizeof(struct rx_desc), q->fl[i].desc,
565                                           q->fl[i].phys_addr);
566                 }
567
568         for (i = 0; i < SGE_TXQ_PER_SET; ++i)
569                 if (q->txq[i].desc) {
570                         spin_lock(&adapter->sge.reg_lock);
571                         t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0);
572                         spin_unlock(&adapter->sge.reg_lock);
573                         if (q->txq[i].sdesc) {
574                                 free_tx_desc(adapter, &q->txq[i],
575                                              q->txq[i].in_use);
576                                 kfree(q->txq[i].sdesc);
577                         }
578                         dma_free_coherent(&pdev->dev,
579                                           q->txq[i].size *
580                                           sizeof(struct tx_desc),
581                                           q->txq[i].desc, q->txq[i].phys_addr);
582                         __skb_queue_purge(&q->txq[i].sendq);
583                 }
584
585         if (q->rspq.desc) {
586                 spin_lock(&adapter->sge.reg_lock);
587                 t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id);
588                 spin_unlock(&adapter->sge.reg_lock);
589                 dma_free_coherent(&pdev->dev,
590                                   q->rspq.size * sizeof(struct rsp_desc),
591                                   q->rspq.desc, q->rspq.phys_addr);
592         }
593
594         memset(q, 0, sizeof(*q));
595 }
596
597 /**
598  *      init_qset_cntxt - initialize an SGE queue set context info
599  *      @qs: the queue set
600  *      @id: the queue set id
601  *
602  *      Initializes the TIDs and context ids for the queues of a queue set.
603  */
604 static void init_qset_cntxt(struct sge_qset *qs, unsigned int id)
605 {
606         qs->rspq.cntxt_id = id;
607         qs->fl[0].cntxt_id = 2 * id;
608         qs->fl[1].cntxt_id = 2 * id + 1;
609         qs->txq[TXQ_ETH].cntxt_id = FW_TUNNEL_SGEEC_START + id;
610         qs->txq[TXQ_ETH].token = FW_TUNNEL_TID_START + id;
611         qs->txq[TXQ_OFLD].cntxt_id = FW_OFLD_SGEEC_START + id;
612         qs->txq[TXQ_CTRL].cntxt_id = FW_CTRL_SGEEC_START + id;
613         qs->txq[TXQ_CTRL].token = FW_CTRL_TID_START + id;
614 }
615
616 /**
617  *      sgl_len - calculates the size of an SGL of the given capacity
618  *      @n: the number of SGL entries
619  *
620  *      Calculates the number of flits needed for a scatter/gather list that
621  *      can hold the given number of entries.
622  */
623 static inline unsigned int sgl_len(unsigned int n)
624 {
625         /* alternatively: 3 * (n / 2) + 2 * (n & 1) */
626         return (3 * n) / 2 + (n & 1);
627 }
628
629 /**
630  *      flits_to_desc - returns the num of Tx descriptors for the given flits
631  *      @n: the number of flits
632  *
633  *      Calculates the number of Tx descriptors needed for the supplied number
634  *      of flits.
635  */
636 static inline unsigned int flits_to_desc(unsigned int n)
637 {
638         BUG_ON(n >= ARRAY_SIZE(flit_desc_map));
639         return flit_desc_map[n];
640 }
641
642 /**
643  *      get_packet - return the next ingress packet buffer from a free list
644  *      @adap: the adapter that received the packet
645  *      @fl: the SGE free list holding the packet
646  *      @len: the packet length including any SGE padding
647  *      @drop_thres: # of remaining buffers before we start dropping packets
648  *
649  *      Get the next packet from a free list and complete setup of the
650  *      sk_buff.  If the packet is small we make a copy and recycle the
651  *      original buffer, otherwise we use the original buffer itself.  If a
652  *      positive drop threshold is supplied packets are dropped and their
653  *      buffers recycled if (a) the number of remaining buffers is under the
654  *      threshold and the packet is too big to copy, or (b) the packet should
655  *      be copied but there is no memory for the copy.
656  */
657 static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl,
658                                   unsigned int len, unsigned int drop_thres)
659 {
660         struct sk_buff *skb = NULL;
661         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
662
663         prefetch(sd->skb->data);
664         fl->credits--;
665
666         if (len <= SGE_RX_COPY_THRES) {
667                 skb = alloc_skb(len, GFP_ATOMIC);
668                 if (likely(skb != NULL)) {
669                         __skb_put(skb, len);
670                         pci_dma_sync_single_for_cpu(adap->pdev,
671                                             pci_unmap_addr(sd, dma_addr), len,
672                                             PCI_DMA_FROMDEVICE);
673                         memcpy(skb->data, sd->skb->data, len);
674                         pci_dma_sync_single_for_device(adap->pdev,
675                                             pci_unmap_addr(sd, dma_addr), len,
676                                             PCI_DMA_FROMDEVICE);
677                 } else if (!drop_thres)
678                         goto use_orig_buf;
679 recycle:
680                 recycle_rx_buf(adap, fl, fl->cidx);
681                 return skb;
682         }
683
684         if (unlikely(fl->credits < drop_thres))
685                 goto recycle;
686
687 use_orig_buf:
688         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
689                          fl->buf_size, PCI_DMA_FROMDEVICE);
690         skb = sd->skb;
691         skb_put(skb, len);
692         __refill_fl(adap, fl);
693         return skb;
694 }
695
696 /**
697  *      get_packet_pg - return the next ingress packet buffer from a free list
698  *      @adap: the adapter that received the packet
699  *      @fl: the SGE free list holding the packet
700  *      @len: the packet length including any SGE padding
701  *      @drop_thres: # of remaining buffers before we start dropping packets
702  *
703  *      Get the next packet from a free list populated with page chunks.
704  *      If the packet is small we make a copy and recycle the original buffer,
705  *      otherwise we attach the original buffer as a page fragment to a fresh
706  *      sk_buff.  If a positive drop threshold is supplied packets are dropped
707  *      and their buffers recycled if (a) the number of remaining buffers is
708  *      under the threshold and the packet is too big to copy, or (b) there's
709  *      no system memory.
710  *
711  *      Note: this function is similar to @get_packet but deals with Rx buffers
712  *      that are page chunks rather than sk_buffs.
713  */
714 static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
715                                      unsigned int len, unsigned int drop_thres)
716 {
717         struct sk_buff *skb = NULL;
718         struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
719
720         if (len <= SGE_RX_COPY_THRES) {
721                 skb = alloc_skb(len, GFP_ATOMIC);
722                 if (likely(skb != NULL)) {
723                         __skb_put(skb, len);
724                         pci_dma_sync_single_for_cpu(adap->pdev,
725                                             pci_unmap_addr(sd, dma_addr), len,
726                                             PCI_DMA_FROMDEVICE);
727                         memcpy(skb->data, sd->pg_chunk.va, len);
728                         pci_dma_sync_single_for_device(adap->pdev,
729                                             pci_unmap_addr(sd, dma_addr), len,
730                                             PCI_DMA_FROMDEVICE);
731                 } else if (!drop_thres)
732                         return NULL;
733 recycle:
734                 fl->credits--;
735                 recycle_rx_buf(adap, fl, fl->cidx);
736                 return skb;
737         }
738
739         if (unlikely(fl->credits <= drop_thres))
740                 goto recycle;
741
742         skb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
743         if (unlikely(!skb)) {
744                 if (!drop_thres)
745                         return NULL;
746                 goto recycle;
747         }
748
749         pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
750                          fl->buf_size, PCI_DMA_FROMDEVICE);
751         __skb_put(skb, SGE_RX_PULL_LEN);
752         memcpy(skb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
753         skb_fill_page_desc(skb, 0, sd->pg_chunk.page,
754                            sd->pg_chunk.offset + SGE_RX_PULL_LEN,
755                            len - SGE_RX_PULL_LEN);
756         skb->len = len;
757         skb->data_len = len - SGE_RX_PULL_LEN;
758         skb->truesize += skb->data_len;
759
760         fl->credits--;
761         /*
762          * We do not refill FLs here, we let the caller do it to overlap a
763          * prefetch.
764          */
765         return skb;
766 }
767
768 /**
769  *      get_imm_packet - return the next ingress packet buffer from a response
770  *      @resp: the response descriptor containing the packet data
771  *
772  *      Return a packet containing the immediate data of the given response.
773  */
774 static inline struct sk_buff *get_imm_packet(const struct rsp_desc *resp)
775 {
776         struct sk_buff *skb = alloc_skb(IMMED_PKT_SIZE, GFP_ATOMIC);
777
778         if (skb) {
779                 __skb_put(skb, IMMED_PKT_SIZE);
780                 skb_copy_to_linear_data(skb, resp->imm_data, IMMED_PKT_SIZE);
781         }
782         return skb;
783 }
784
785 /**
786  *      calc_tx_descs - calculate the number of Tx descriptors for a packet
787  *      @skb: the packet
788  *
789  *      Returns the number of Tx descriptors needed for the given Ethernet
790  *      packet.  Ethernet packets require addition of WR and CPL headers.
791  */
792 static inline unsigned int calc_tx_descs(const struct sk_buff *skb)
793 {
794         unsigned int flits;
795
796         if (skb->len <= WR_LEN - sizeof(struct cpl_tx_pkt))
797                 return 1;
798
799         flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 2;
800         if (skb_shinfo(skb)->gso_size)
801                 flits++;
802         return flits_to_desc(flits);
803 }
804
805 /**
806  *      make_sgl - populate a scatter/gather list for a packet
807  *      @skb: the packet
808  *      @sgp: the SGL to populate
809  *      @start: start address of skb main body data to include in the SGL
810  *      @len: length of skb main body data to include in the SGL
811  *      @pdev: the PCI device
812  *
813  *      Generates a scatter/gather list for the buffers that make up a packet
814  *      and returns the SGL size in 8-byte words.  The caller must size the SGL
815  *      appropriately.
816  */
817 static inline unsigned int make_sgl(const struct sk_buff *skb,
818                                     struct sg_ent *sgp, unsigned char *start,
819                                     unsigned int len, struct pci_dev *pdev)
820 {
821         dma_addr_t mapping;
822         unsigned int i, j = 0, nfrags;
823
824         if (len) {
825                 mapping = pci_map_single(pdev, start, len, PCI_DMA_TODEVICE);
826                 sgp->len[0] = cpu_to_be32(len);
827                 sgp->addr[0] = cpu_to_be64(mapping);
828                 j = 1;
829         }
830
831         nfrags = skb_shinfo(skb)->nr_frags;
832         for (i = 0; i < nfrags; i++) {
833                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
834
835                 mapping = pci_map_page(pdev, frag->page, frag->page_offset,
836                                        frag->size, PCI_DMA_TODEVICE);
837                 sgp->len[j] = cpu_to_be32(frag->size);
838                 sgp->addr[j] = cpu_to_be64(mapping);
839                 j ^= 1;
840                 if (j == 0)
841                         ++sgp;
842         }
843         if (j)
844                 sgp->len[j] = 0;
845         return ((nfrags + (len != 0)) * 3) / 2 + j;
846 }
847
848 /**
849  *      check_ring_tx_db - check and potentially ring a Tx queue's doorbell
850  *      @adap: the adapter
851  *      @q: the Tx queue
852  *
853  *      Ring the doorbel if a Tx queue is asleep.  There is a natural race,
854  *      where the HW is going to sleep just after we checked, however,
855  *      then the interrupt handler will detect the outstanding TX packet
856  *      and ring the doorbell for us.
857  *
858  *      When GTS is disabled we unconditionally ring the doorbell.
859  */
860 static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
861 {
862 #if USE_GTS
863         clear_bit(TXQ_LAST_PKT_DB, &q->flags);
864         if (test_and_set_bit(TXQ_RUNNING, &q->flags) == 0) {
865                 set_bit(TXQ_LAST_PKT_DB, &q->flags);
866                 t3_write_reg(adap, A_SG_KDOORBELL,
867                              F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
868         }
869 #else
870         wmb();                  /* write descriptors before telling HW */
871         t3_write_reg(adap, A_SG_KDOORBELL,
872                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
873 #endif
874 }
875
876 static inline void wr_gen2(struct tx_desc *d, unsigned int gen)
877 {
878 #if SGE_NUM_GENBITS == 2
879         d->flit[TX_DESC_FLITS - 1] = cpu_to_be64(gen);
880 #endif
881 }
882
883 /**
884  *      write_wr_hdr_sgl - write a WR header and, optionally, SGL
885  *      @ndesc: number of Tx descriptors spanned by the SGL
886  *      @skb: the packet corresponding to the WR
887  *      @d: first Tx descriptor to be written
888  *      @pidx: index of above descriptors
889  *      @q: the SGE Tx queue
890  *      @sgl: the SGL
891  *      @flits: number of flits to the start of the SGL in the first descriptor
892  *      @sgl_flits: the SGL size in flits
893  *      @gen: the Tx descriptor generation
894  *      @wr_hi: top 32 bits of WR header based on WR type (big endian)
895  *      @wr_lo: low 32 bits of WR header based on WR type (big endian)
896  *
897  *      Write a work request header and an associated SGL.  If the SGL is
898  *      small enough to fit into one Tx descriptor it has already been written
899  *      and we just need to write the WR header.  Otherwise we distribute the
900  *      SGL across the number of descriptors it spans.
901  */
902 static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb,
903                              struct tx_desc *d, unsigned int pidx,
904                              const struct sge_txq *q,
905                              const struct sg_ent *sgl,
906                              unsigned int flits, unsigned int sgl_flits,
907                              unsigned int gen, __be32 wr_hi,
908                              __be32 wr_lo)
909 {
910         struct work_request_hdr *wrp = (struct work_request_hdr *)d;
911         struct tx_sw_desc *sd = &q->sdesc[pidx];
912
913         sd->skb = skb;
914         if (need_skb_unmap()) {
915                 struct unmap_info *ui = (struct unmap_info *)skb->cb;
916
917                 ui->fragidx = 0;
918                 ui->addr_idx = 0;
919                 ui->sflit = flits;
920         }
921
922         if (likely(ndesc == 1)) {
923                 skb->priority = pidx;
924                 wrp->wr_hi = htonl(F_WR_SOP | F_WR_EOP | V_WR_DATATYPE(1) |
925                                    V_WR_SGLSFLT(flits)) | wr_hi;
926                 wmb();
927                 wrp->wr_lo = htonl(V_WR_LEN(flits + sgl_flits) |
928                                    V_WR_GEN(gen)) | wr_lo;
929                 wr_gen2(d, gen);
930         } else {
931                 unsigned int ogen = gen;
932                 const u64 *fp = (const u64 *)sgl;
933                 struct work_request_hdr *wp = wrp;
934
935                 wrp->wr_hi = htonl(F_WR_SOP | V_WR_DATATYPE(1) |
936                                    V_WR_SGLSFLT(flits)) | wr_hi;
937
938                 while (sgl_flits) {
939                         unsigned int avail = WR_FLITS - flits;
940
941                         if (avail > sgl_flits)
942                                 avail = sgl_flits;
943                         memcpy(&d->flit[flits], fp, avail * sizeof(*fp));
944                         sgl_flits -= avail;
945                         ndesc--;
946                         if (!sgl_flits)
947                                 break;
948
949                         fp += avail;
950                         d++;
951                         sd++;
952                         if (++pidx == q->size) {
953                                 pidx = 0;
954                                 gen ^= 1;
955                                 d = q->desc;
956                                 sd = q->sdesc;
957                         }
958
959                         sd->skb = skb;
960                         wrp = (struct work_request_hdr *)d;
961                         wrp->wr_hi = htonl(V_WR_DATATYPE(1) |
962                                            V_WR_SGLSFLT(1)) | wr_hi;
963                         wrp->wr_lo = htonl(V_WR_LEN(min(WR_FLITS,
964                                                         sgl_flits + 1)) |
965                                            V_WR_GEN(gen)) | wr_lo;
966                         wr_gen2(d, gen);
967                         flits = 1;
968                 }
969                 skb->priority = pidx;
970                 wrp->wr_hi |= htonl(F_WR_EOP);
971                 wmb();
972                 wp->wr_lo = htonl(V_WR_LEN(WR_FLITS) | V_WR_GEN(ogen)) | wr_lo;
973                 wr_gen2((struct tx_desc *)wp, ogen);
974                 WARN_ON(ndesc != 0);
975         }
976 }
977
978 /**
979  *      write_tx_pkt_wr - write a TX_PKT work request
980  *      @adap: the adapter
981  *      @skb: the packet to send
982  *      @pi: the egress interface
983  *      @pidx: index of the first Tx descriptor to write
984  *      @gen: the generation value to use
985  *      @q: the Tx queue
986  *      @ndesc: number of descriptors the packet will occupy
987  *      @compl: the value of the COMPL bit to use
988  *
989  *      Generate a TX_PKT work request to send the supplied packet.
990  */
991 static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
992                             const struct port_info *pi,
993                             unsigned int pidx, unsigned int gen,
994                             struct sge_txq *q, unsigned int ndesc,
995                             unsigned int compl)
996 {
997         unsigned int flits, sgl_flits, cntrl, tso_info;
998         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
999         struct tx_desc *d = &q->desc[pidx];
1000         struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d;
1001
1002         cpl->len = htonl(skb->len | 0x80000000);
1003         cntrl = V_TXPKT_INTF(pi->port_id);
1004
1005         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
1006                 cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(vlan_tx_tag_get(skb));
1007
1008         tso_info = V_LSO_MSS(skb_shinfo(skb)->gso_size);
1009         if (tso_info) {
1010                 int eth_type;
1011                 struct cpl_tx_pkt_lso *hdr = (struct cpl_tx_pkt_lso *)cpl;
1012
1013                 d->flit[2] = 0;
1014                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT_LSO);
1015                 hdr->cntrl = htonl(cntrl);
1016                 eth_type = skb_network_offset(skb) == ETH_HLEN ?
1017                     CPL_ETH_II : CPL_ETH_II_VLAN;
1018                 tso_info |= V_LSO_ETH_TYPE(eth_type) |
1019                     V_LSO_IPHDR_WORDS(ip_hdr(skb)->ihl) |
1020                     V_LSO_TCPHDR_WORDS(tcp_hdr(skb)->doff);
1021                 hdr->lso_info = htonl(tso_info);
1022                 flits = 3;
1023         } else {
1024                 cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT);
1025                 cntrl |= F_TXPKT_IPCSUM_DIS;    /* SW calculates IP csum */
1026                 cntrl |= V_TXPKT_L4CSUM_DIS(skb->ip_summed != CHECKSUM_PARTIAL);
1027                 cpl->cntrl = htonl(cntrl);
1028
1029                 if (skb->len <= WR_LEN - sizeof(*cpl)) {
1030                         q->sdesc[pidx].skb = NULL;
1031                         if (!skb->data_len)
1032                                 skb_copy_from_linear_data(skb, &d->flit[2],
1033                                                           skb->len);
1034                         else
1035                                 skb_copy_bits(skb, 0, &d->flit[2], skb->len);
1036
1037                         flits = (skb->len + 7) / 8 + 2;
1038                         cpl->wr.wr_hi = htonl(V_WR_BCNTLFLT(skb->len & 7) |
1039                                               V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT)
1040                                               | F_WR_SOP | F_WR_EOP | compl);
1041                         wmb();
1042                         cpl->wr.wr_lo = htonl(V_WR_LEN(flits) | V_WR_GEN(gen) |
1043                                               V_WR_TID(q->token));
1044                         wr_gen2(d, gen);
1045                         kfree_skb(skb);
1046                         return;
1047                 }
1048
1049                 flits = 2;
1050         }
1051
1052         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
1053         sgl_flits = make_sgl(skb, sgp, skb->data, skb_headlen(skb), adap->pdev);
1054         if (need_skb_unmap())
1055                 ((struct unmap_info *)skb->cb)->len = skb_headlen(skb);
1056
1057         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, gen,
1058                          htonl(V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) | compl),
1059                          htonl(V_WR_TID(q->token)));
1060 }
1061
1062 /**
1063  *      eth_xmit - add a packet to the Ethernet Tx queue
1064  *      @skb: the packet
1065  *      @dev: the egress net device
1066  *
1067  *      Add a packet to an SGE Tx queue.  Runs with softirqs disabled.
1068  */
1069 int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
1070 {
1071         unsigned int ndesc, pidx, credits, gen, compl;
1072         const struct port_info *pi = netdev_priv(dev);
1073         struct adapter *adap = pi->adapter;
1074         struct sge_qset *qs = pi->qs;
1075         struct sge_txq *q = &qs->txq[TXQ_ETH];
1076
1077         /*
1078          * The chip min packet length is 9 octets but play safe and reject
1079          * anything shorter than an Ethernet header.
1080          */
1081         if (unlikely(skb->len < ETH_HLEN)) {
1082                 dev_kfree_skb(skb);
1083                 return NETDEV_TX_OK;
1084         }
1085
1086         spin_lock(&q->lock);
1087         reclaim_completed_tx(adap, q);
1088
1089         credits = q->size - q->in_use;
1090         ndesc = calc_tx_descs(skb);
1091
1092         if (unlikely(credits < ndesc)) {
1093                 if (!netif_queue_stopped(dev)) {
1094                         netif_stop_queue(dev);
1095                         set_bit(TXQ_ETH, &qs->txq_stopped);
1096                         q->stops++;
1097                         dev_err(&adap->pdev->dev,
1098                                 "%s: Tx ring %u full while queue awake!\n",
1099                                 dev->name, q->cntxt_id & 7);
1100                 }
1101                 spin_unlock(&q->lock);
1102                 return NETDEV_TX_BUSY;
1103         }
1104
1105         q->in_use += ndesc;
1106         if (unlikely(credits - ndesc < q->stop_thres)) {
1107                 q->stops++;
1108                 netif_stop_queue(dev);
1109                 set_bit(TXQ_ETH, &qs->txq_stopped);
1110 #if !USE_GTS
1111                 if (should_restart_tx(q) &&
1112                     test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
1113                         q->restarts++;
1114                         netif_wake_queue(dev);
1115                 }
1116 #endif
1117         }
1118
1119         gen = q->gen;
1120         q->unacked += ndesc;
1121         compl = (q->unacked & 8) << (S_WR_COMPL - 3);
1122         q->unacked &= 7;
1123         pidx = q->pidx;
1124         q->pidx += ndesc;
1125         if (q->pidx >= q->size) {
1126                 q->pidx -= q->size;
1127                 q->gen ^= 1;
1128         }
1129
1130         /* update port statistics */
1131         if (skb->ip_summed == CHECKSUM_COMPLETE)
1132                 qs->port_stats[SGE_PSTAT_TX_CSUM]++;
1133         if (skb_shinfo(skb)->gso_size)
1134                 qs->port_stats[SGE_PSTAT_TSO]++;
1135         if (vlan_tx_tag_present(skb) && pi->vlan_grp)
1136                 qs->port_stats[SGE_PSTAT_VLANINS]++;
1137
1138         dev->trans_start = jiffies;
1139         spin_unlock(&q->lock);
1140
1141         /*
1142          * We do not use Tx completion interrupts to free DMAd Tx packets.
1143          * This is good for performamce but means that we rely on new Tx
1144          * packets arriving to run the destructors of completed packets,
1145          * which open up space in their sockets' send queues.  Sometimes
1146          * we do not get such new packets causing Tx to stall.  A single
1147          * UDP transmitter is a good example of this situation.  We have
1148          * a clean up timer that periodically reclaims completed packets
1149          * but it doesn't run often enough (nor do we want it to) to prevent
1150          * lengthy stalls.  A solution to this problem is to run the
1151          * destructor early, after the packet is queued but before it's DMAd.
1152          * A cons is that we lie to socket memory accounting, but the amount
1153          * of extra memory is reasonable (limited by the number of Tx
1154          * descriptors), the packets do actually get freed quickly by new
1155          * packets almost always, and for protocols like TCP that wait for
1156          * acks to really free up the data the extra memory is even less.
1157          * On the positive side we run the destructors on the sending CPU
1158          * rather than on a potentially different completing CPU, usually a
1159          * good thing.  We also run them without holding our Tx queue lock,
1160          * unlike what reclaim_completed_tx() would otherwise do.
1161          *
1162          * Run the destructor before telling the DMA engine about the packet
1163          * to make sure it doesn't complete and get freed prematurely.
1164          */
1165         if (likely(!skb_shared(skb)))
1166                 skb_orphan(skb);
1167
1168         write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl);
1169         check_ring_tx_db(adap, q);
1170         return NETDEV_TX_OK;
1171 }
1172
1173 /**
1174  *      write_imm - write a packet into a Tx descriptor as immediate data
1175  *      @d: the Tx descriptor to write
1176  *      @skb: the packet
1177  *      @len: the length of packet data to write as immediate data
1178  *      @gen: the generation bit value to write
1179  *
1180  *      Writes a packet as immediate data into a Tx descriptor.  The packet
1181  *      contains a work request at its beginning.  We must write the packet
1182  *      carefully so the SGE doesn't read it accidentally before it's written
1183  *      in its entirety.
1184  */
1185 static inline void write_imm(struct tx_desc *d, struct sk_buff *skb,
1186                              unsigned int len, unsigned int gen)
1187 {
1188         struct work_request_hdr *from = (struct work_request_hdr *)skb->data;
1189         struct work_request_hdr *to = (struct work_request_hdr *)d;
1190
1191         if (likely(!skb->data_len))
1192                 memcpy(&to[1], &from[1], len - sizeof(*from));
1193         else
1194                 skb_copy_bits(skb, sizeof(*from), &to[1], len - sizeof(*from));
1195
1196         to->wr_hi = from->wr_hi | htonl(F_WR_SOP | F_WR_EOP |
1197                                         V_WR_BCNTLFLT(len & 7));
1198         wmb();
1199         to->wr_lo = from->wr_lo | htonl(V_WR_GEN(gen) |
1200                                         V_WR_LEN((len + 7) / 8));
1201         wr_gen2(d, gen);
1202         kfree_skb(skb);
1203 }
1204
1205 /**
1206  *      check_desc_avail - check descriptor availability on a send queue
1207  *      @adap: the adapter
1208  *      @q: the send queue
1209  *      @skb: the packet needing the descriptors
1210  *      @ndesc: the number of Tx descriptors needed
1211  *      @qid: the Tx queue number in its queue set (TXQ_OFLD or TXQ_CTRL)
1212  *
1213  *      Checks if the requested number of Tx descriptors is available on an
1214  *      SGE send queue.  If the queue is already suspended or not enough
1215  *      descriptors are available the packet is queued for later transmission.
1216  *      Must be called with the Tx queue locked.
1217  *
1218  *      Returns 0 if enough descriptors are available, 1 if there aren't
1219  *      enough descriptors and the packet has been queued, and 2 if the caller
1220  *      needs to retry because there weren't enough descriptors at the
1221  *      beginning of the call but some freed up in the mean time.
1222  */
1223 static inline int check_desc_avail(struct adapter *adap, struct sge_txq *q,
1224                                    struct sk_buff *skb, unsigned int ndesc,
1225                                    unsigned int qid)
1226 {
1227         if (unlikely(!skb_queue_empty(&q->sendq))) {
1228               addq_exit:__skb_queue_tail(&q->sendq, skb);
1229                 return 1;
1230         }
1231         if (unlikely(q->size - q->in_use < ndesc)) {
1232                 struct sge_qset *qs = txq_to_qset(q, qid);
1233
1234                 set_bit(qid, &qs->txq_stopped);
1235                 smp_mb__after_clear_bit();
1236
1237                 if (should_restart_tx(q) &&
1238                     test_and_clear_bit(qid, &qs->txq_stopped))
1239                         return 2;
1240
1241                 q->stops++;
1242                 goto addq_exit;
1243         }
1244         return 0;
1245 }
1246
1247 /**
1248  *      reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
1249  *      @q: the SGE control Tx queue
1250  *
1251  *      This is a variant of reclaim_completed_tx() that is used for Tx queues
1252  *      that send only immediate data (presently just the control queues) and
1253  *      thus do not have any sk_buffs to release.
1254  */
1255 static inline void reclaim_completed_tx_imm(struct sge_txq *q)
1256 {
1257         unsigned int reclaim = q->processed - q->cleaned;
1258
1259         q->in_use -= reclaim;
1260         q->cleaned += reclaim;
1261 }
1262
1263 static inline int immediate(const struct sk_buff *skb)
1264 {
1265         return skb->len <= WR_LEN;
1266 }
1267
1268 /**
1269  *      ctrl_xmit - send a packet through an SGE control Tx queue
1270  *      @adap: the adapter
1271  *      @q: the control queue
1272  *      @skb: the packet
1273  *
1274  *      Send a packet through an SGE control Tx queue.  Packets sent through
1275  *      a control queue must fit entirely as immediate data in a single Tx
1276  *      descriptor and have no page fragments.
1277  */
1278 static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
1279                      struct sk_buff *skb)
1280 {
1281         int ret;
1282         struct work_request_hdr *wrp = (struct work_request_hdr *)skb->data;
1283
1284         if (unlikely(!immediate(skb))) {
1285                 WARN_ON(1);
1286                 dev_kfree_skb(skb);
1287                 return NET_XMIT_SUCCESS;
1288         }
1289
1290         wrp->wr_hi |= htonl(F_WR_SOP | F_WR_EOP);
1291         wrp->wr_lo = htonl(V_WR_TID(q->token));
1292
1293         spin_lock(&q->lock);
1294       again:reclaim_completed_tx_imm(q);
1295
1296         ret = check_desc_avail(adap, q, skb, 1, TXQ_CTRL);
1297         if (unlikely(ret)) {
1298                 if (ret == 1) {
1299                         spin_unlock(&q->lock);
1300                         return NET_XMIT_CN;
1301                 }
1302                 goto again;
1303         }
1304
1305         write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
1306
1307         q->in_use++;
1308         if (++q->pidx >= q->size) {
1309                 q->pidx = 0;
1310                 q->gen ^= 1;
1311         }
1312         spin_unlock(&q->lock);
1313         wmb();
1314         t3_write_reg(adap, A_SG_KDOORBELL,
1315                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1316         return NET_XMIT_SUCCESS;
1317 }
1318
1319 /**
1320  *      restart_ctrlq - restart a suspended control queue
1321  *      @qs: the queue set cotaining the control queue
1322  *
1323  *      Resumes transmission on a suspended Tx control queue.
1324  */
1325 static void restart_ctrlq(unsigned long data)
1326 {
1327         struct sk_buff *skb;
1328         struct sge_qset *qs = (struct sge_qset *)data;
1329         struct sge_txq *q = &qs->txq[TXQ_CTRL];
1330
1331         spin_lock(&q->lock);
1332       again:reclaim_completed_tx_imm(q);
1333
1334         while (q->in_use < q->size &&
1335                (skb = __skb_dequeue(&q->sendq)) != NULL) {
1336
1337                 write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
1338
1339                 if (++q->pidx >= q->size) {
1340                         q->pidx = 0;
1341                         q->gen ^= 1;
1342                 }
1343                 q->in_use++;
1344         }
1345
1346         if (!skb_queue_empty(&q->sendq)) {
1347                 set_bit(TXQ_CTRL, &qs->txq_stopped);
1348                 smp_mb__after_clear_bit();
1349
1350                 if (should_restart_tx(q) &&
1351                     test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped))
1352                         goto again;
1353                 q->stops++;
1354         }
1355
1356         spin_unlock(&q->lock);
1357         t3_write_reg(qs->adap, A_SG_KDOORBELL,
1358                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1359 }
1360
1361 /*
1362  * Send a management message through control queue 0
1363  */
1364 int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
1365 {
1366         return ctrl_xmit(adap, &adap->sge.qs[0].txq[TXQ_CTRL], skb);
1367 }
1368
1369 /**
1370  *      deferred_unmap_destructor - unmap a packet when it is freed
1371  *      @skb: the packet
1372  *
1373  *      This is the packet destructor used for Tx packets that need to remain
1374  *      mapped until they are freed rather than until their Tx descriptors are
1375  *      freed.
1376  */
1377 static void deferred_unmap_destructor(struct sk_buff *skb)
1378 {
1379         int i;
1380         const dma_addr_t *p;
1381         const struct skb_shared_info *si;
1382         const struct deferred_unmap_info *dui;
1383         const struct unmap_info *ui = (struct unmap_info *)skb->cb;
1384
1385         dui = (struct deferred_unmap_info *)skb->head;
1386         p = dui->addr;
1387
1388         if (ui->len)
1389                 pci_unmap_single(dui->pdev, *p++, ui->len, PCI_DMA_TODEVICE);
1390
1391         si = skb_shinfo(skb);
1392         for (i = 0; i < si->nr_frags; i++)
1393                 pci_unmap_page(dui->pdev, *p++, si->frags[i].size,
1394                                PCI_DMA_TODEVICE);
1395 }
1396
1397 static void setup_deferred_unmapping(struct sk_buff *skb, struct pci_dev *pdev,
1398                                      const struct sg_ent *sgl, int sgl_flits)
1399 {
1400         dma_addr_t *p;
1401         struct deferred_unmap_info *dui;
1402
1403         dui = (struct deferred_unmap_info *)skb->head;
1404         dui->pdev = pdev;
1405         for (p = dui->addr; sgl_flits >= 3; sgl++, sgl_flits -= 3) {
1406                 *p++ = be64_to_cpu(sgl->addr[0]);
1407                 *p++ = be64_to_cpu(sgl->addr[1]);
1408         }
1409         if (sgl_flits)
1410                 *p = be64_to_cpu(sgl->addr[0]);
1411 }
1412
1413 /**
1414  *      write_ofld_wr - write an offload work request
1415  *      @adap: the adapter
1416  *      @skb: the packet to send
1417  *      @q: the Tx queue
1418  *      @pidx: index of the first Tx descriptor to write
1419  *      @gen: the generation value to use
1420  *      @ndesc: number of descriptors the packet will occupy
1421  *
1422  *      Write an offload work request to send the supplied packet.  The packet
1423  *      data already carry the work request with most fields populated.
1424  */
1425 static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb,
1426                           struct sge_txq *q, unsigned int pidx,
1427                           unsigned int gen, unsigned int ndesc)
1428 {
1429         unsigned int sgl_flits, flits;
1430         struct work_request_hdr *from;
1431         struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
1432         struct tx_desc *d = &q->desc[pidx];
1433
1434         if (immediate(skb)) {
1435                 q->sdesc[pidx].skb = NULL;
1436                 write_imm(d, skb, skb->len, gen);
1437                 return;
1438         }
1439
1440         /* Only TX_DATA builds SGLs */
1441
1442         from = (struct work_request_hdr *)skb->data;
1443         memcpy(&d->flit[1], &from[1],
1444                skb_transport_offset(skb) - sizeof(*from));
1445
1446         flits = skb_transport_offset(skb) / 8;
1447         sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
1448         sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb),
1449                              skb->tail - skb->transport_header,
1450                              adap->pdev);
1451         if (need_skb_unmap()) {
1452                 setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits);
1453                 skb->destructor = deferred_unmap_destructor;
1454                 ((struct unmap_info *)skb->cb)->len = (skb->tail -
1455                                                        skb->transport_header);
1456         }
1457
1458         write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits,
1459                          gen, from->wr_hi, from->wr_lo);
1460 }
1461
1462 /**
1463  *      calc_tx_descs_ofld - calculate # of Tx descriptors for an offload packet
1464  *      @skb: the packet
1465  *
1466  *      Returns the number of Tx descriptors needed for the given offload
1467  *      packet.  These packets are already fully constructed.
1468  */
1469 static inline unsigned int calc_tx_descs_ofld(const struct sk_buff *skb)
1470 {
1471         unsigned int flits, cnt;
1472
1473         if (skb->len <= WR_LEN)
1474                 return 1;       /* packet fits as immediate data */
1475
1476         flits = skb_transport_offset(skb) / 8;  /* headers */
1477         cnt = skb_shinfo(skb)->nr_frags;
1478         if (skb->tail != skb->transport_header)
1479                 cnt++;
1480         return flits_to_desc(flits + sgl_len(cnt));
1481 }
1482
1483 /**
1484  *      ofld_xmit - send a packet through an offload queue
1485  *      @adap: the adapter
1486  *      @q: the Tx offload queue
1487  *      @skb: the packet
1488  *
1489  *      Send an offload packet through an SGE offload queue.
1490  */
1491 static int ofld_xmit(struct adapter *adap, struct sge_txq *q,
1492                      struct sk_buff *skb)
1493 {
1494         int ret;
1495         unsigned int ndesc = calc_tx_descs_ofld(skb), pidx, gen;
1496
1497         spin_lock(&q->lock);
1498       again:reclaim_completed_tx(adap, q);
1499
1500         ret = check_desc_avail(adap, q, skb, ndesc, TXQ_OFLD);
1501         if (unlikely(ret)) {
1502                 if (ret == 1) {
1503                         skb->priority = ndesc;  /* save for restart */
1504                         spin_unlock(&q->lock);
1505                         return NET_XMIT_CN;
1506                 }
1507                 goto again;
1508         }
1509
1510         gen = q->gen;
1511         q->in_use += ndesc;
1512         pidx = q->pidx;
1513         q->pidx += ndesc;
1514         if (q->pidx >= q->size) {
1515                 q->pidx -= q->size;
1516                 q->gen ^= 1;
1517         }
1518         spin_unlock(&q->lock);
1519
1520         write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
1521         check_ring_tx_db(adap, q);
1522         return NET_XMIT_SUCCESS;
1523 }
1524
1525 /**
1526  *      restart_offloadq - restart a suspended offload queue
1527  *      @qs: the queue set cotaining the offload queue
1528  *
1529  *      Resumes transmission on a suspended Tx offload queue.
1530  */
1531 static void restart_offloadq(unsigned long data)
1532 {
1533         struct sk_buff *skb;
1534         struct sge_qset *qs = (struct sge_qset *)data;
1535         struct sge_txq *q = &qs->txq[TXQ_OFLD];
1536         const struct port_info *pi = netdev_priv(qs->netdev);
1537         struct adapter *adap = pi->adapter;
1538
1539         spin_lock(&q->lock);
1540       again:reclaim_completed_tx(adap, q);
1541
1542         while ((skb = skb_peek(&q->sendq)) != NULL) {
1543                 unsigned int gen, pidx;
1544                 unsigned int ndesc = skb->priority;
1545
1546                 if (unlikely(q->size - q->in_use < ndesc)) {
1547                         set_bit(TXQ_OFLD, &qs->txq_stopped);
1548                         smp_mb__after_clear_bit();
1549
1550                         if (should_restart_tx(q) &&
1551                             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped))
1552                                 goto again;
1553                         q->stops++;
1554                         break;
1555                 }
1556
1557                 gen = q->gen;
1558                 q->in_use += ndesc;
1559                 pidx = q->pidx;
1560                 q->pidx += ndesc;
1561                 if (q->pidx >= q->size) {
1562                         q->pidx -= q->size;
1563                         q->gen ^= 1;
1564                 }
1565                 __skb_unlink(skb, &q->sendq);
1566                 spin_unlock(&q->lock);
1567
1568                 write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
1569                 spin_lock(&q->lock);
1570         }
1571         spin_unlock(&q->lock);
1572
1573 #if USE_GTS
1574         set_bit(TXQ_RUNNING, &q->flags);
1575         set_bit(TXQ_LAST_PKT_DB, &q->flags);
1576 #endif
1577         t3_write_reg(adap, A_SG_KDOORBELL,
1578                      F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
1579 }
1580
1581 /**
1582  *      queue_set - return the queue set a packet should use
1583  *      @skb: the packet
1584  *
1585  *      Maps a packet to the SGE queue set it should use.  The desired queue
1586  *      set is carried in bits 1-3 in the packet's priority.
1587  */
1588 static inline int queue_set(const struct sk_buff *skb)
1589 {
1590         return skb->priority >> 1;
1591 }
1592
1593 /**
1594  *      is_ctrl_pkt - return whether an offload packet is a control packet
1595  *      @skb: the packet
1596  *
1597  *      Determines whether an offload packet should use an OFLD or a CTRL
1598  *      Tx queue.  This is indicated by bit 0 in the packet's priority.
1599  */
1600 static inline int is_ctrl_pkt(const struct sk_buff *skb)
1601 {
1602         return skb->priority & 1;
1603 }
1604
1605 /**
1606  *      t3_offload_tx - send an offload packet
1607  *      @tdev: the offload device to send to
1608  *      @skb: the packet
1609  *
1610  *      Sends an offload packet.  We use the packet priority to select the
1611  *      appropriate Tx queue as follows: bit 0 indicates whether the packet
1612  *      should be sent as regular or control, bits 1-3 select the queue set.
1613  */
1614 int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
1615 {
1616         struct adapter *adap = tdev2adap(tdev);
1617         struct sge_qset *qs = &adap->sge.qs[queue_set(skb)];
1618
1619         if (unlikely(is_ctrl_pkt(skb)))
1620                 return ctrl_xmit(adap, &qs->txq[TXQ_CTRL], skb);
1621
1622         return ofld_xmit(adap, &qs->txq[TXQ_OFLD], skb);
1623 }
1624
1625 /**
1626  *      offload_enqueue - add an offload packet to an SGE offload receive queue
1627  *      @q: the SGE response queue
1628  *      @skb: the packet
1629  *
1630  *      Add a new offload packet to an SGE response queue's offload packet
1631  *      queue.  If the packet is the first on the queue it schedules the RX
1632  *      softirq to process the queue.
1633  */
1634 static inline void offload_enqueue(struct sge_rspq *q, struct sk_buff *skb)
1635 {
1636         skb->next = skb->prev = NULL;
1637         if (q->rx_tail)
1638                 q->rx_tail->next = skb;
1639         else {
1640                 struct sge_qset *qs = rspq_to_qset(q);
1641
1642                 napi_schedule(&qs->napi);
1643                 q->rx_head = skb;
1644         }
1645         q->rx_tail = skb;
1646 }
1647
1648 /**
1649  *      deliver_partial_bundle - deliver a (partial) bundle of Rx offload pkts
1650  *      @tdev: the offload device that will be receiving the packets
1651  *      @q: the SGE response queue that assembled the bundle
1652  *      @skbs: the partial bundle
1653  *      @n: the number of packets in the bundle
1654  *
1655  *      Delivers a (partial) bundle of Rx offload packets to an offload device.
1656  */
1657 static inline void deliver_partial_bundle(struct t3cdev *tdev,
1658                                           struct sge_rspq *q,
1659                                           struct sk_buff *skbs[], int n)
1660 {
1661         if (n) {
1662                 q->offload_bundles++;
1663                 tdev->recv(tdev, skbs, n);
1664         }
1665 }
1666
1667 /**
1668  *      ofld_poll - NAPI handler for offload packets in interrupt mode
1669  *      @dev: the network device doing the polling
1670  *      @budget: polling budget
1671  *
1672  *      The NAPI handler for offload packets when a response queue is serviced
1673  *      by the hard interrupt handler, i.e., when it's operating in non-polling
1674  *      mode.  Creates small packet batches and sends them through the offload
1675  *      receive handler.  Batches need to be of modest size as we do prefetches
1676  *      on the packets in each.
1677  */
1678 static int ofld_poll(struct napi_struct *napi, int budget)
1679 {
1680         struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
1681         struct sge_rspq *q = &qs->rspq;
1682         struct adapter *adapter = qs->adap;
1683         int work_done = 0;
1684
1685         while (work_done < budget) {
1686                 struct sk_buff *head, *tail, *skbs[RX_BUNDLE_SIZE];
1687                 int ngathered;
1688
1689                 spin_lock_irq(&q->lock);
1690                 head = q->rx_head;
1691                 if (!head) {
1692                         napi_complete(napi);
1693                         spin_unlock_irq(&q->lock);
1694                         return work_done;
1695                 }
1696
1697                 tail = q->rx_tail;
1698                 q->rx_head = q->rx_tail = NULL;
1699                 spin_unlock_irq(&q->lock);
1700
1701                 for (ngathered = 0; work_done < budget && head; work_done++) {
1702                         prefetch(head->data);
1703                         skbs[ngathered] = head;
1704                         head = head->next;
1705                         skbs[ngathered]->next = NULL;
1706                         if (++ngathered == RX_BUNDLE_SIZE) {
1707                                 q->offload_bundles++;
1708                                 adapter->tdev.recv(&adapter->tdev, skbs,
1709                                                    ngathered);
1710                                 ngathered = 0;
1711                         }
1712                 }
1713                 if (head) {     /* splice remaining packets back onto Rx queue */
1714                         spin_lock_irq(&q->lock);
1715                         tail->next = q->rx_head;
1716                         if (!q->rx_head)
1717                                 q->rx_tail = tail;
1718                         q->rx_head = head;
1719                         spin_unlock_irq(&q->lock);
1720                 }
1721                 deliver_partial_bundle(&adapter->tdev, q, skbs, ngathered);
1722         }
1723
1724         return work_done;
1725 }
1726
1727 /**
1728  *      rx_offload - process a received offload packet
1729  *      @tdev: the offload device receiving the packet
1730  *      @rq: the response queue that received the packet
1731  *      @skb: the packet
1732  *      @rx_gather: a gather list of packets if we are building a bundle
1733  *      @gather_idx: index of the next available slot in the bundle
1734  *
1735  *      Process an ingress offload pakcet and add it to the offload ingress
1736  *      queue.  Returns the index of the next available slot in the bundle.
1737  */
1738 static inline int rx_offload(struct t3cdev *tdev, struct sge_rspq *rq,
1739                              struct sk_buff *skb, struct sk_buff *rx_gather[],
1740                              unsigned int gather_idx)
1741 {
1742         rq->offload_pkts++;
1743         skb_reset_mac_header(skb);
1744         skb_reset_network_header(skb);
1745         skb_reset_transport_header(skb);
1746
1747         if (rq->polling) {
1748                 rx_gather[gather_idx++] = skb;
1749                 if (gather_idx == RX_BUNDLE_SIZE) {
1750                         tdev->recv(tdev, rx_gather, RX_BUNDLE_SIZE);
1751                         gather_idx = 0;
1752                         rq->offload_bundles++;
1753                 }
1754         } else
1755                 offload_enqueue(rq, skb);
1756
1757         return gather_idx;
1758 }
1759
1760 /**
1761  *      restart_tx - check whether to restart suspended Tx queues
1762  *      @qs: the queue set to resume
1763  *
1764  *      Restarts suspended Tx queues of an SGE queue set if they have enough
1765  *      free resources to resume operation.
1766  */
1767 static void restart_tx(struct sge_qset *qs)
1768 {
1769         if (test_bit(TXQ_ETH, &qs->txq_stopped) &&
1770             should_restart_tx(&qs->txq[TXQ_ETH]) &&
1771             test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
1772                 qs->txq[TXQ_ETH].restarts++;
1773                 if (netif_running(qs->netdev))
1774                         netif_wake_queue(qs->netdev);
1775         }
1776
1777         if (test_bit(TXQ_OFLD, &qs->txq_stopped) &&
1778             should_restart_tx(&qs->txq[TXQ_OFLD]) &&
1779             test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped)) {
1780                 qs->txq[TXQ_OFLD].restarts++;
1781                 tasklet_schedule(&qs->txq[TXQ_OFLD].qresume_tsk);
1782         }
1783         if (test_bit(TXQ_CTRL, &qs->txq_stopped) &&
1784             should_restart_tx(&qs->txq[TXQ_CTRL]) &&
1785             test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped)) {
1786                 qs->txq[TXQ_CTRL].restarts++;
1787                 tasklet_schedule(&qs->txq[TXQ_CTRL].qresume_tsk);
1788         }
1789 }
1790
1791 /**
1792  *      rx_eth - process an ingress ethernet packet
1793  *      @adap: the adapter
1794  *      @rq: the response queue that received the packet
1795  *      @skb: the packet
1796  *      @pad: amount of padding at the start of the buffer
1797  *
1798  *      Process an ingress ethernet pakcet and deliver it to the stack.
1799  *      The padding is 2 if the packet was delivered in an Rx buffer and 0
1800  *      if it was immediate data in a response.
1801  */
1802 static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
1803                    struct sk_buff *skb, int pad)
1804 {
1805         struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)(skb->data + pad);
1806         struct port_info *pi;
1807
1808         skb_pull(skb, sizeof(*p) + pad);
1809         skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
1810         skb->dev->last_rx = jiffies;
1811         pi = netdev_priv(skb->dev);
1812         if (pi->rx_csum_offload && p->csum_valid && p->csum == 0xffff &&
1813             !p->fragment) {
1814                 rspq_to_qset(rq)->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
1815                 skb->ip_summed = CHECKSUM_UNNECESSARY;
1816         } else
1817                 skb->ip_summed = CHECKSUM_NONE;
1818
1819         if (unlikely(p->vlan_valid)) {
1820                 struct vlan_group *grp = pi->vlan_grp;
1821
1822                 rspq_to_qset(rq)->port_stats[SGE_PSTAT_VLANEX]++;
1823                 if (likely(grp))
1824                         __vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
1825                                           rq->polling);
1826                 else
1827                         dev_kfree_skb_any(skb);
1828         } else if (rq->polling)
1829                 netif_receive_skb(skb);
1830         else
1831                 netif_rx(skb);
1832 }
1833
1834 /**
1835  *      handle_rsp_cntrl_info - handles control information in a response
1836  *      @qs: the queue set corresponding to the response
1837  *      @flags: the response control flags
1838  *
1839  *      Handles the control information of an SGE response, such as GTS
1840  *      indications and completion credits for the queue set's Tx queues.
1841  *      HW coalesces credits, we don't do any extra SW coalescing.
1842  */
1843 static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags)
1844 {
1845         unsigned int credits;
1846
1847 #if USE_GTS
1848         if (flags & F_RSPD_TXQ0_GTS)
1849                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_ETH].flags);
1850 #endif
1851
1852         credits = G_RSPD_TXQ0_CR(flags);
1853         if (credits)
1854                 qs->txq[TXQ_ETH].processed += credits;
1855
1856         credits = G_RSPD_TXQ2_CR(flags);
1857         if (credits)
1858                 qs->txq[TXQ_CTRL].processed += credits;
1859
1860 # if USE_GTS
1861         if (flags & F_RSPD_TXQ1_GTS)
1862                 clear_bit(TXQ_RUNNING, &qs->txq[TXQ_OFLD].flags);
1863 # endif
1864         credits = G_RSPD_TXQ1_CR(flags);
1865         if (credits)
1866                 qs->txq[TXQ_OFLD].processed += credits;
1867 }
1868
1869 /**
1870  *      check_ring_db - check if we need to ring any doorbells
1871  *      @adapter: the adapter
1872  *      @qs: the queue set whose Tx queues are to be examined
1873  *      @sleeping: indicates which Tx queue sent GTS
1874  *
1875  *      Checks if some of a queue set's Tx queues need to ring their doorbells
1876  *      to resume transmission after idling while they still have unprocessed
1877  *      descriptors.
1878  */
1879 static void check_ring_db(struct adapter *adap, struct sge_qset *qs,
1880                           unsigned int sleeping)
1881 {
1882         if (sleeping & F_RSPD_TXQ0_GTS) {
1883                 struct sge_txq *txq = &qs->txq[TXQ_ETH];
1884
1885                 if (txq->cleaned + txq->in_use != txq->processed &&
1886                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
1887                         set_bit(TXQ_RUNNING, &txq->flags);
1888                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
1889                                      V_EGRCNTX(txq->cntxt_id));
1890                 }
1891         }
1892
1893         if (sleeping & F_RSPD_TXQ1_GTS) {
1894                 struct sge_txq *txq = &qs->txq[TXQ_OFLD];
1895
1896                 if (txq->cleaned + txq->in_use != txq->processed &&
1897                     !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
1898                         set_bit(TXQ_RUNNING, &txq->flags);
1899                         t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
1900                                      V_EGRCNTX(txq->cntxt_id));
1901                 }
1902         }
1903 }
1904
1905 /**
1906  *      is_new_response - check if a response is newly written
1907  *      @r: the response descriptor
1908  *      @q: the response queue
1909  *
1910  *      Returns true if a response descriptor contains a yet unprocessed
1911  *      response.
1912  */
1913 static inline int is_new_response(const struct rsp_desc *r,
1914                                   const struct sge_rspq *q)
1915 {
1916         return (r->intr_gen & F_RSPD_GEN2) == q->gen;
1917 }
1918
1919 #define RSPD_GTS_MASK  (F_RSPD_TXQ0_GTS | F_RSPD_TXQ1_GTS)
1920 #define RSPD_CTRL_MASK (RSPD_GTS_MASK | \
1921                         V_RSPD_TXQ0_CR(M_RSPD_TXQ0_CR) | \
1922                         V_RSPD_TXQ1_CR(M_RSPD_TXQ1_CR) | \
1923                         V_RSPD_TXQ2_CR(M_RSPD_TXQ2_CR))
1924
1925 /* How long to delay the next interrupt in case of memory shortage, in 0.1us. */
1926 #define NOMEM_INTR_DELAY 2500
1927
1928 /**
1929  *      process_responses - process responses from an SGE response queue
1930  *      @adap: the adapter
1931  *      @qs: the queue set to which the response queue belongs
1932  *      @budget: how many responses can be processed in this round
1933  *
1934  *      Process responses from an SGE response queue up to the supplied budget.
1935  *      Responses include received packets as well as credits and other events
1936  *      for the queues that belong to the response queue's queue set.
1937  *      A negative budget is effectively unlimited.
1938  *
1939  *      Additionally choose the interrupt holdoff time for the next interrupt
1940  *      on this queue.  If the system is under memory shortage use a fairly
1941  *      long delay to help recovery.
1942  */
1943 static int process_responses(struct adapter *adap, struct sge_qset *qs,
1944                              int budget)
1945 {
1946         struct sge_rspq *q = &qs->rspq;
1947         struct rsp_desc *r = &q->desc[q->cidx];
1948         int budget_left = budget;
1949         unsigned int sleeping = 0;
1950         struct sk_buff *offload_skbs[RX_BUNDLE_SIZE];
1951         int ngathered = 0;
1952
1953         q->next_holdoff = q->holdoff_tmr;
1954
1955         while (likely(budget_left && is_new_response(r, q))) {
1956                 int eth, ethpad = 2;
1957                 struct sk_buff *skb = NULL;
1958                 u32 len, flags = ntohl(r->flags);
1959                 u32 rss_hi = *(const u32 *)r, rss_lo = r->rss_hdr.rss_hash_val;
1960
1961                 eth = r->rss_hdr.opcode == CPL_RX_PKT;
1962
1963                 if (unlikely(flags & F_RSPD_ASYNC_NOTIF)) {
1964                         skb = alloc_skb(AN_PKT_SIZE, GFP_ATOMIC);
1965                         if (!skb)
1966                                 goto no_mem;
1967
1968                         memcpy(__skb_put(skb, AN_PKT_SIZE), r, AN_PKT_SIZE);
1969                         skb->data[0] = CPL_ASYNC_NOTIF;
1970                         rss_hi = htonl(CPL_ASYNC_NOTIF << 24);
1971                         q->async_notif++;
1972                 } else if (flags & F_RSPD_IMM_DATA_VALID) {
1973                         skb = get_imm_packet(r);
1974                         if (unlikely(!skb)) {
1975 no_mem:
1976                                 q->next_holdoff = NOMEM_INTR_DELAY;
1977                                 q->nomem++;
1978                                 /* consume one credit since we tried */
1979                                 budget_left--;
1980                                 break;
1981                         }
1982                         q->imm_data++;
1983                         ethpad = 0;
1984                 } else if ((len = ntohl(r->len_cq)) != 0) {
1985                         struct sge_fl *fl;
1986
1987                         fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
1988                         if (fl->use_pages) {
1989                                 void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
1990
1991                                 prefetch(addr);
1992 #if L1_CACHE_BYTES < 128
1993                                 prefetch(addr + L1_CACHE_BYTES);
1994 #endif
1995                                 __refill_fl(adap, fl);
1996
1997                                 skb = get_packet_pg(adap, fl, G_RSPD_LEN(len),
1998                                                  eth ? SGE_RX_DROP_THRES : 0);
1999                         } else
2000                                 skb = get_packet(adap, fl, G_RSPD_LEN(len),
2001                                                  eth ? SGE_RX_DROP_THRES : 0);
2002                         if (unlikely(!skb)) {
2003                                 if (!eth)
2004                                         goto no_mem;
2005                                 q->rx_drops++;
2006                         } else if (unlikely(r->rss_hdr.opcode == CPL_TRACE_PKT))
2007                                 __skb_pull(skb, 2);
2008
2009                         if (++fl->cidx == fl->size)
2010                                 fl->cidx = 0;
2011                 } else
2012                         q->pure_rsps++;
2013
2014                 if (flags & RSPD_CTRL_MASK) {
2015                         sleeping |= flags & RSPD_GTS_MASK;
2016                         handle_rsp_cntrl_info(qs, flags);
2017                 }
2018
2019                 r++;
2020                 if (unlikely(++q->cidx == q->size)) {
2021                         q->cidx = 0;
2022                         q->gen ^= 1;
2023                         r = q->desc;
2024                 }
2025                 prefetch(r);
2026
2027                 if (++q->credits >= (q->size / 4)) {
2028                         refill_rspq(adap, q, q->credits);
2029                         q->credits = 0;
2030                 }
2031
2032                 if (likely(skb != NULL)) {
2033                         if (eth)
2034                                 rx_eth(adap, q, skb, ethpad);
2035                         else {
2036                                 /* Preserve the RSS info in csum & priority */
2037                                 skb->csum = rss_hi;
2038                                 skb->priority = rss_lo;
2039                                 ngathered = rx_offload(&adap->tdev, q, skb,
2040                                                        offload_skbs,
2041                                                        ngathered);
2042                         }
2043                 }
2044                 --budget_left;
2045         }
2046
2047         deliver_partial_bundle(&adap->tdev, q, offload_skbs, ngathered);
2048         if (sleeping)
2049                 check_ring_db(adap, qs, sleeping);
2050
2051         smp_mb();               /* commit Tx queue .processed updates */
2052         if (unlikely(qs->txq_stopped != 0))
2053                 restart_tx(qs);
2054
2055         budget -= budget_left;
2056         return budget;
2057 }
2058
2059 static inline int is_pure_response(const struct rsp_desc *r)
2060 {
2061         u32 n = ntohl(r->flags) & (F_RSPD_ASYNC_NOTIF | F_RSPD_IMM_DATA_VALID);
2062
2063         return (n | r->len_cq) == 0;
2064 }
2065
2066 /**
2067  *      napi_rx_handler - the NAPI handler for Rx processing
2068  *      @napi: the napi instance
2069  *      @budget: how many packets we can process in this round
2070  *
2071  *      Handler for new data events when using NAPI.
2072  */
2073 static int napi_rx_handler(struct napi_struct *napi, int budget)
2074 {
2075         struct sge_qset *qs = container_of(napi, struct sge_qset, napi);
2076         struct adapter *adap = qs->adap;
2077         int work_done = process_responses(adap, qs, budget);
2078
2079         if (likely(work_done < budget)) {
2080                 napi_complete(napi);
2081
2082                 /*
2083                  * Because we don't atomically flush the following
2084                  * write it is possible that in very rare cases it can
2085                  * reach the device in a way that races with a new
2086                  * response being written plus an error interrupt
2087                  * causing the NAPI interrupt handler below to return
2088                  * unhandled status to the OS.  To protect against
2089                  * this would require flushing the write and doing
2090                  * both the write and the flush with interrupts off.
2091                  * Way too expensive and unjustifiable given the
2092                  * rarity of the race.
2093                  *
2094                  * The race cannot happen at all with MSI-X.
2095                  */
2096                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(qs->rspq.cntxt_id) |
2097                              V_NEWTIMER(qs->rspq.next_holdoff) |
2098                              V_NEWINDEX(qs->rspq.cidx));
2099         }
2100         return work_done;
2101 }
2102
2103 /*
2104  * Returns true if the device is already scheduled for polling.
2105  */
2106 static inline int napi_is_scheduled(struct napi_struct *napi)
2107 {
2108         return test_bit(NAPI_STATE_SCHED, &napi->state);
2109 }
2110
2111 /**
2112  *      process_pure_responses - process pure responses from a response queue
2113  *      @adap: the adapter
2114  *      @qs: the queue set owning the response queue
2115  *      @r: the first pure response to process
2116  *
2117  *      A simpler version of process_responses() that handles only pure (i.e.,
2118  *      non data-carrying) responses.  Such respones are too light-weight to
2119  *      justify calling a softirq under NAPI, so we handle them specially in
2120  *      the interrupt handler.  The function is called with a pointer to a
2121  *      response, which the caller must ensure is a valid pure response.
2122  *
2123  *      Returns 1 if it encounters a valid data-carrying response, 0 otherwise.
2124  */
2125 static int process_pure_responses(struct adapter *adap, struct sge_qset *qs,
2126                                   struct rsp_desc *r)
2127 {
2128         struct sge_rspq *q = &qs->rspq;
2129         unsigned int sleeping = 0;
2130
2131         do {
2132                 u32 flags = ntohl(r->flags);
2133
2134                 r++;
2135                 if (unlikely(++q->cidx == q->size)) {
2136                         q->cidx = 0;
2137                         q->gen ^= 1;
2138                         r = q->desc;
2139                 }
2140                 prefetch(r);
2141
2142                 if (flags & RSPD_CTRL_MASK) {
2143                         sleeping |= flags & RSPD_GTS_MASK;
2144                         handle_rsp_cntrl_info(qs, flags);
2145                 }
2146
2147                 q->pure_rsps++;
2148                 if (++q->credits >= (q->size / 4)) {
2149                         refill_rspq(adap, q, q->credits);
2150                         q->credits = 0;
2151                 }
2152         } while (is_new_response(r, q) && is_pure_response(r));
2153
2154         if (sleeping)
2155                 check_ring_db(adap, qs, sleeping);
2156
2157         smp_mb();               /* commit Tx queue .processed updates */
2158         if (unlikely(qs->txq_stopped != 0))
2159                 restart_tx(qs);
2160
2161         return is_new_response(r, q);
2162 }
2163
2164 /**
2165  *      handle_responses - decide what to do with new responses in NAPI mode
2166  *      @adap: the adapter
2167  *      @q: the response queue
2168  *
2169  *      This is used by the NAPI interrupt handlers to decide what to do with
2170  *      new SGE responses.  If there are no new responses it returns -1.  If
2171  *      there are new responses and they are pure (i.e., non-data carrying)
2172  *      it handles them straight in hard interrupt context as they are very
2173  *      cheap and don't deliver any packets.  Finally, if there are any data
2174  *      signaling responses it schedules the NAPI handler.  Returns 1 if it
2175  *      schedules NAPI, 0 if all new responses were pure.
2176  *
2177  *      The caller must ascertain NAPI is not already running.
2178  */
2179 static inline int handle_responses(struct adapter *adap, struct sge_rspq *q)
2180 {
2181         struct sge_qset *qs = rspq_to_qset(q);
2182         struct rsp_desc *r = &q->desc[q->cidx];
2183
2184         if (!is_new_response(r, q))
2185                 return -1;
2186         if (is_pure_response(r) && process_pure_responses(adap, qs, r) == 0) {
2187                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2188                              V_NEWTIMER(q->holdoff_tmr) | V_NEWINDEX(q->cidx));
2189                 return 0;
2190         }
2191         napi_schedule(&qs->napi);
2192         return 1;
2193 }
2194
2195 /*
2196  * The MSI-X interrupt handler for an SGE response queue for the non-NAPI case
2197  * (i.e., response queue serviced in hard interrupt).
2198  */
2199 irqreturn_t t3_sge_intr_msix(int irq, void *cookie)
2200 {
2201         struct sge_qset *qs = cookie;
2202         struct adapter *adap = qs->adap;
2203         struct sge_rspq *q = &qs->rspq;
2204
2205         spin_lock(&q->lock);
2206         if (process_responses(adap, qs, -1) == 0)
2207                 q->unhandled_irqs++;
2208         t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2209                      V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
2210         spin_unlock(&q->lock);
2211         return IRQ_HANDLED;
2212 }
2213
2214 /*
2215  * The MSI-X interrupt handler for an SGE response queue for the NAPI case
2216  * (i.e., response queue serviced by NAPI polling).
2217  */
2218 static irqreturn_t t3_sge_intr_msix_napi(int irq, void *cookie)
2219 {
2220         struct sge_qset *qs = cookie;
2221         struct sge_rspq *q = &qs->rspq;
2222
2223         spin_lock(&q->lock);
2224
2225         if (handle_responses(qs->adap, q) < 0)
2226                 q->unhandled_irqs++;
2227         spin_unlock(&q->lock);
2228         return IRQ_HANDLED;
2229 }
2230
2231 /*
2232  * The non-NAPI MSI interrupt handler.  This needs to handle data events from
2233  * SGE response queues as well as error and other async events as they all use
2234  * the same MSI vector.  We use one SGE response queue per port in this mode
2235  * and protect all response queues with queue 0's lock.
2236  */
2237 static irqreturn_t t3_intr_msi(int irq, void *cookie)
2238 {
2239         int new_packets = 0;
2240         struct adapter *adap = cookie;
2241         struct sge_rspq *q = &adap->sge.qs[0].rspq;
2242
2243         spin_lock(&q->lock);
2244
2245         if (process_responses(adap, &adap->sge.qs[0], -1)) {
2246                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
2247                              V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
2248                 new_packets = 1;
2249         }
2250
2251         if (adap->params.nports == 2 &&
2252             process_responses(adap, &adap->sge.qs[1], -1)) {
2253                 struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
2254
2255                 t3_write_reg(adap, A_SG_GTS, V_RSPQ(q1->cntxt_id) |
2256                              V_NEWTIMER(q1->next_holdoff) |
2257                              V_NEWINDEX(q1->cidx));
2258                 new_packets = 1;
2259         }
2260
2261         if (!new_packets && t3_slow_intr_handler(adap) == 0)
2262                 q->unhandled_irqs++;
2263
2264         spin_unlock(&q->lock);
2265         return IRQ_HANDLED;
2266 }
2267
2268 static int rspq_check_napi(struct sge_qset *qs)
2269 {
2270         struct sge_rspq *q = &qs->rspq;
2271
2272         if (!napi_is_scheduled(&qs->napi) &&
2273             is_new_response(&q->desc[q->cidx], q)) {
2274                 napi_schedule(&qs->napi);
2275                 return 1;
2276         }
2277         return 0;
2278 }
2279
2280 /*
2281  * The MSI interrupt handler for the NAPI case (i.e., response queues serviced
2282  * by NAPI polling).  Handles data events from SGE response queues as well as
2283  * error and other async events as they all use the same MSI vector.  We use
2284  * one SGE response queue per port in this mode and protect all response
2285  * queues with queue 0's lock.
2286  */
2287 static irqreturn_t t3_intr_msi_napi(int irq, void *cookie)
2288 {
2289         int new_packets;
2290         struct adapter *adap = cookie;
2291         struct sge_rspq *q = &adap->sge.qs[0].rspq;
2292
2293         spin_lock(&q->lock);
2294
2295         new_packets = rspq_check_napi(&adap->sge.qs[0]);
2296         if (adap->params.nports == 2)
2297                 new_packets += rspq_check_napi(&adap->sge.qs[1]);
2298         if (!new_packets && t3_slow_intr_handler(adap) == 0)
2299                 q->unhandled_irqs++;
2300
2301         spin_unlock(&q->lock);
2302         return IRQ_HANDLED;
2303 }
2304
2305 /*
2306  * A helper function that processes responses and issues GTS.
2307  */
2308 static inline int process_responses_gts(struct adapter *adap,
2309                                         struct sge_rspq *rq)
2310 {
2311         int work;
2312
2313         work = process_responses(adap, rspq_to_qset(rq), -1);
2314         t3_write_reg(adap, A_SG_GTS, V_RSPQ(rq->cntxt_id) |
2315                      V_NEWTIMER(rq->next_holdoff) | V_NEWINDEX(rq->cidx));
2316         return work;
2317 }
2318
2319 /*
2320  * The legacy INTx interrupt handler.  This needs to handle data events from
2321  * SGE response queues as well as error and other async events as they all use
2322  * the same interrupt pin.  We use one SGE response queue per port in this mode
2323  * and protect all response queues with queue 0's lock.
2324  */
2325 static irqreturn_t t3_intr(int irq, void *cookie)
2326 {
2327         int work_done, w0, w1;
2328         struct adapter *adap = cookie;
2329         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
2330         struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
2331
2332         spin_lock(&q0->lock);
2333
2334         w0 = is_new_response(&q0->desc[q0->cidx], q0);
2335         w1 = adap->params.nports == 2 &&
2336             is_new_response(&q1->desc[q1->cidx], q1);
2337
2338         if (likely(w0 | w1)) {
2339                 t3_write_reg(adap, A_PL_CLI, 0);
2340                 t3_read_reg(adap, A_PL_CLI);    /* flush */
2341
2342                 if (likely(w0))
2343                         process_responses_gts(adap, q0);
2344
2345                 if (w1)
2346                         process_responses_gts(adap, q1);
2347
2348                 work_done = w0 | w1;
2349         } else
2350                 work_done = t3_slow_intr_handler(adap);
2351
2352         spin_unlock(&q0->lock);
2353         return IRQ_RETVAL(work_done != 0);
2354 }
2355
2356 /*
2357  * Interrupt handler for legacy INTx interrupts for T3B-based cards.
2358  * Handles data events from SGE response queues as well as error and other
2359  * async events as they all use the same interrupt pin.  We use one SGE
2360  * response queue per port in this mode and protect all response queues with
2361  * queue 0's lock.
2362  */
2363 static irqreturn_t t3b_intr(int irq, void *cookie)
2364 {
2365         u32 map;
2366         struct adapter *adap = cookie;
2367         struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
2368
2369         t3_write_reg(adap, A_PL_CLI, 0);
2370         map = t3_read_reg(adap, A_SG_DATA_INTR);
2371
2372         if (unlikely(!map))     /* shared interrupt, most likely */
2373                 return IRQ_NONE;
2374
2375         spin_lock(&q0->lock);
2376
2377         if (unlikely(map & F_ERRINTR))
2378                 t3_slow_intr_handler(adap);
2379
2380         if (likely(map & 1))
2381                 process_responses_gts(adap, q0);
2382
2383         if (map & 2)
2384                 process_responses_gts(adap, &adap->sge.qs[1].rspq);
2385
2386         spin_unlock(&q0->lock);
2387         return IRQ_HANDLED;
2388 }
2389
2390 /*
2391  * NAPI interrupt handler for legacy INTx interrupts for T3B-based cards.
2392  * Handles data events from SGE response queues as well as error and other
2393  * async events as they all use the same interrupt pin.  We use one SGE
2394  * response queue per port in this mode and protect all response queues with
2395  * queue 0's lock.
2396  */
2397 static irqreturn_t t3b_intr_napi(int irq, void *cookie)
2398 {
2399         u32 map;
2400         struct adapter *adap = cookie;
2401         struct sge_qset *qs0 = &adap->sge.qs[0];
2402         struct sge_rspq *q0 = &qs0->rspq;
2403
2404         t3_write_reg(adap, A_PL_CLI, 0);
2405         map = t3_read_reg(adap, A_SG_DATA_INTR);
2406
2407         if (unlikely(!map))     /* shared interrupt, most likely */
2408                 return IRQ_NONE;
2409
2410         spin_lock(&q0->lock);
2411
2412         if (unlikely(map & F_ERRINTR))
2413                 t3_slow_intr_handler(adap);
2414
2415         if (likely(map & 1))
2416                 napi_schedule(&qs0->napi);
2417
2418         if (map & 2)
2419                 napi_schedule(&adap->sge.qs[1].napi);
2420
2421         spin_unlock(&q0->lock);
2422         return IRQ_HANDLED;
2423 }
2424
2425 /**
2426  *      t3_intr_handler - select the top-level interrupt handler
2427  *      @adap: the adapter
2428  *      @polling: whether using NAPI to service response queues
2429  *
2430  *      Selects the top-level interrupt handler based on the type of interrupts
2431  *      (MSI-X, MSI, or legacy) and whether NAPI will be used to service the
2432  *      response queues.
2433  */
2434 irq_handler_t t3_intr_handler(struct adapter *adap, int polling)
2435 {
2436         if (adap->flags & USING_MSIX)
2437                 return polling ? t3_sge_intr_msix_napi : t3_sge_intr_msix;
2438         if (adap->flags & USING_MSI)
2439                 return polling ? t3_intr_msi_napi : t3_intr_msi;
2440         if (adap->params.rev > 0)
2441                 return polling ? t3b_intr_napi : t3b_intr;
2442         return t3_intr;
2443 }
2444
2445 /**
2446  *      t3_sge_err_intr_handler - SGE async event interrupt handler
2447  *      @adapter: the adapter
2448  *
2449  *      Interrupt handler for SGE asynchronous (non-data) events.
2450  */
2451 void t3_sge_err_intr_handler(struct adapter *adapter)
2452 {
2453         unsigned int v, status = t3_read_reg(adapter, A_SG_INT_CAUSE);
2454
2455         if (status & F_RSPQCREDITOVERFOW)
2456                 CH_ALERT(adapter, "SGE response queue credit overflow\n");
2457
2458         if (status & F_RSPQDISABLED) {
2459                 v = t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS);
2460
2461                 CH_ALERT(adapter,
2462                          "packet delivered to disabled response queue "
2463                          "(0x%x)\n", (v >> S_RSPQ0DISABLED) & 0xff);
2464         }
2465
2466         if (status & (F_HIPIODRBDROPERR | F_LOPIODRBDROPERR))
2467                 CH_ALERT(adapter, "SGE dropped %s priority doorbell\n",
2468                          status & F_HIPIODRBDROPERR ? "high" : "lo");
2469
2470         t3_write_reg(adapter, A_SG_INT_CAUSE, status);
2471         if (status & (F_RSPQCREDITOVERFOW | F_RSPQDISABLED))
2472                 t3_fatal_err(adapter);
2473 }
2474
2475 /**
2476  *      sge_timer_cb - perform periodic maintenance of an SGE qset
2477  *      @data: the SGE queue set to maintain
2478  *
2479  *      Runs periodically from a timer to perform maintenance of an SGE queue
2480  *      set.  It performs two tasks:
2481  *
2482  *      a) Cleans up any completed Tx descriptors that may still be pending.
2483  *      Normal descriptor cleanup happens when new packets are added to a Tx
2484  *      queue so this timer is relatively infrequent and does any cleanup only
2485  *      if the Tx queue has not seen any new packets in a while.  We make a
2486  *      best effort attempt to reclaim descriptors, in that we don't wait
2487  *      around if we cannot get a queue's lock (which most likely is because
2488  *      someone else is queueing new packets and so will also handle the clean
2489  *      up).  Since control queues use immediate data exclusively we don't
2490  *      bother cleaning them up here.
2491  *
2492  *      b) Replenishes Rx queues that have run out due to memory shortage.
2493  *      Normally new Rx buffers are added when existing ones are consumed but
2494  *      when out of memory a queue can become empty.  We try to add only a few
2495  *      buffers here, the queue will be replenished fully as these new buffers
2496  *      are used up if memory shortage has subsided.
2497  */
2498 static void sge_timer_cb(unsigned long data)
2499 {
2500         spinlock_t *lock;
2501         struct sge_qset *qs = (struct sge_qset *)data;
2502         struct adapter *adap = qs->adap;
2503
2504         if (spin_trylock(&qs->txq[TXQ_ETH].lock)) {
2505                 reclaim_completed_tx(adap, &qs->txq[TXQ_ETH]);
2506                 spin_unlock(&qs->txq[TXQ_ETH].lock);
2507         }
2508         if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) {
2509                 reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD]);
2510                 spin_unlock(&qs->txq[TXQ_OFLD].lock);
2511         }
2512         lock = (adap->flags & USING_MSIX) ? &qs->rspq.lock :
2513                                             &adap->sge.qs[0].rspq.lock;
2514         if (spin_trylock_irq(lock)) {
2515                 if (!napi_is_scheduled(&qs->napi)) {
2516                         u32 status = t3_read_reg(adap, A_SG_RSPQ_FL_STATUS);
2517
2518                         if (qs->fl[0].credits < qs->fl[0].size)
2519                                 __refill_fl(adap, &qs->fl[0]);
2520                         if (qs->fl[1].credits < qs->fl[1].size)
2521                                 __refill_fl(adap, &qs->fl[1]);
2522
2523                         if (status & (1 << qs->rspq.cntxt_id)) {
2524                                 qs->rspq.starved++;
2525                                 if (qs->rspq.credits) {
2526                                         refill_rspq(adap, &qs->rspq, 1);
2527                                         qs->rspq.credits--;
2528                                         qs->rspq.restarted++;
2529                                         t3_write_reg(adap, A_SG_RSPQ_FL_STATUS,
2530                                                      1 << qs->rspq.cntxt_id);
2531                                 }
2532                         }
2533                 }
2534                 spin_unlock_irq(lock);
2535         }
2536         mod_timer(&qs->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
2537 }
2538
2539 /**
2540  *      t3_update_qset_coalesce - update coalescing settings for a queue set
2541  *      @qs: the SGE queue set
2542  *      @p: new queue set parameters
2543  *
2544  *      Update the coalescing settings for an SGE queue set.  Nothing is done
2545  *      if the queue set is not initialized yet.
2546  */
2547 void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p)
2548 {
2549         qs->rspq.holdoff_tmr = max(p->coalesce_usecs * 10, 1U);/* can't be 0 */
2550         qs->rspq.polling = p->polling;
2551         qs->napi.poll = p->polling ? napi_rx_handler : ofld_poll;
2552 }
2553
2554 /**
2555  *      t3_sge_alloc_qset - initialize an SGE queue set
2556  *      @adapter: the adapter
2557  *      @id: the queue set id
2558  *      @nports: how many Ethernet ports will be using this queue set
2559  *      @irq_vec_idx: the IRQ vector index for response queue interrupts
2560  *      @p: configuration parameters for this queue set
2561  *      @ntxq: number of Tx queues for the queue set
2562  *      @netdev: net device associated with this queue set
2563  *
2564  *      Allocate resources and initialize an SGE queue set.  A queue set
2565  *      comprises a response queue, two Rx free-buffer queues, and up to 3
2566  *      Tx queues.  The Tx queues are assigned roles in the order Ethernet
2567  *      queue, offload queue, and control queue.
2568  */
2569 int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
2570                       int irq_vec_idx, const struct qset_params *p,
2571                       int ntxq, struct net_device *dev)
2572 {
2573         int i, ret = -ENOMEM;
2574         struct sge_qset *q = &adapter->sge.qs[id];
2575
2576         init_qset_cntxt(q, id);
2577         init_timer(&q->tx_reclaim_timer);
2578         q->tx_reclaim_timer.data = (unsigned long)q;
2579         q->tx_reclaim_timer.function = sge_timer_cb;
2580
2581         q->fl[0].desc = alloc_ring(adapter->pdev, p->fl_size,
2582                                    sizeof(struct rx_desc),
2583                                    sizeof(struct rx_sw_desc),
2584                                    &q->fl[0].phys_addr, &q->fl[0].sdesc);
2585         if (!q->fl[0].desc)
2586                 goto err;
2587
2588         q->fl[1].desc = alloc_ring(adapter->pdev, p->jumbo_size,
2589                                    sizeof(struct rx_desc),
2590                                    sizeof(struct rx_sw_desc),
2591                                    &q->fl[1].phys_addr, &q->fl[1].sdesc);
2592         if (!q->fl[1].desc)
2593                 goto err;
2594
2595         q->rspq.desc = alloc_ring(adapter->pdev, p->rspq_size,
2596                                   sizeof(struct rsp_desc), 0,
2597                                   &q->rspq.phys_addr, NULL);
2598         if (!q->rspq.desc)
2599                 goto err;
2600
2601         for (i = 0; i < ntxq; ++i) {
2602                 /*
2603                  * The control queue always uses immediate data so does not
2604                  * need to keep track of any sk_buffs.
2605                  */
2606                 size_t sz = i == TXQ_CTRL ? 0 : sizeof(struct tx_sw_desc);
2607
2608                 q->txq[i].desc = alloc_ring(adapter->pdev, p->txq_size[i],
2609                                             sizeof(struct tx_desc), sz,
2610                                             &q->txq[i].phys_addr,
2611                                             &q->txq[i].sdesc);
2612                 if (!q->txq[i].desc)
2613                         goto err;
2614
2615                 q->txq[i].gen = 1;
2616                 q->txq[i].size = p->txq_size[i];
2617                 spin_lock_init(&q->txq[i].lock);
2618                 skb_queue_head_init(&q->txq[i].sendq);
2619         }
2620
2621         tasklet_init(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq,
2622                      (unsigned long)q);
2623         tasklet_init(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq,
2624                      (unsigned long)q);
2625
2626         q->fl[0].gen = q->fl[1].gen = 1;
2627         q->fl[0].size = p->fl_size;
2628         q->fl[1].size = p->jumbo_size;
2629
2630         q->rspq.gen = 1;
2631         q->rspq.size = p->rspq_size;
2632         spin_lock_init(&q->rspq.lock);
2633
2634         q->txq[TXQ_ETH].stop_thres = nports *
2635             flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3);
2636
2637 #if FL0_PG_CHUNK_SIZE > 0
2638         q->fl[0].buf_size = FL0_PG_CHUNK_SIZE;
2639 #else
2640         q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + sizeof(struct cpl_rx_data);
2641 #endif
2642         q->fl[0].use_pages = FL0_PG_CHUNK_SIZE > 0;
2643         q->fl[1].buf_size = is_offload(adapter) ?
2644                 (16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
2645                 MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
2646
2647         spin_lock(&adapter->sge.reg_lock);
2648
2649         /* FL threshold comparison uses < */
2650         ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
2651                                    q->rspq.phys_addr, q->rspq.size,
2652                                    q->fl[0].buf_size, 1, 0);
2653         if (ret)
2654                 goto err_unlock;
2655
2656         for (i = 0; i < SGE_RXQ_PER_SET; ++i) {
2657                 ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0,
2658                                           q->fl[i].phys_addr, q->fl[i].size,
2659                                           q->fl[i].buf_size, p->cong_thres, 1,
2660                                           0);
2661                 if (ret)
2662                         goto err_unlock;
2663         }
2664
2665         ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_ETH].cntxt_id, USE_GTS,
2666                                  SGE_CNTXT_ETH, id, q->txq[TXQ_ETH].phys_addr,
2667                                  q->txq[TXQ_ETH].size, q->txq[TXQ_ETH].token,
2668                                  1, 0);
2669         if (ret)
2670                 goto err_unlock;
2671
2672         if (ntxq > 1) {
2673                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_OFLD].cntxt_id,
2674                                          USE_GTS, SGE_CNTXT_OFLD, id,
2675                                          q->txq[TXQ_OFLD].phys_addr,
2676                                          q->txq[TXQ_OFLD].size, 0, 1, 0);
2677                 if (ret)
2678                         goto err_unlock;
2679         }
2680
2681         if (ntxq > 2) {
2682                 ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_CTRL].cntxt_id, 0,
2683                                          SGE_CNTXT_CTRL, id,
2684                                          q->txq[TXQ_CTRL].phys_addr,
2685                                          q->txq[TXQ_CTRL].size,
2686                                          q->txq[TXQ_CTRL].token, 1, 0);
2687                 if (ret)
2688                         goto err_unlock;
2689         }
2690
2691         spin_unlock(&adapter->sge.reg_lock);
2692
2693         q->adap = adapter;
2694         q->netdev = dev;
2695         t3_update_qset_coalesce(q, p);
2696
2697         refill_fl(adapter, &q->fl[0], q->fl[0].size, GFP_KERNEL);
2698         refill_fl(adapter, &q->fl[1], q->fl[1].size, GFP_KERNEL);
2699         refill_rspq(adapter, &q->rspq, q->rspq.size - 1);
2700
2701         t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) |
2702                      V_NEWTIMER(q->rspq.holdoff_tmr));
2703
2704         mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
2705         return 0;
2706
2707       err_unlock:
2708         spin_unlock(&adapter->sge.reg_lock);
2709       err:
2710         t3_free_qset(adapter, q);
2711         return ret;
2712 }
2713
2714 /**
2715  *      t3_free_sge_resources - free SGE resources
2716  *      @adap: the adapter
2717  *
2718  *      Frees resources used by the SGE queue sets.
2719  */
2720 void t3_free_sge_resources(struct adapter *adap)
2721 {
2722         int i;
2723
2724         for (i = 0; i < SGE_QSETS; ++i)
2725                 t3_free_qset(adap, &adap->sge.qs[i]);
2726 }
2727
2728 /**
2729  *      t3_sge_start - enable SGE
2730  *      @adap: the adapter
2731  *
2732  *      Enables the SGE for DMAs.  This is the last step in starting packet
2733  *      transfers.
2734  */
2735 void t3_sge_start(struct adapter *adap)
2736 {
2737         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, F_GLOBALENABLE);
2738 }
2739
2740 /**
2741  *      t3_sge_stop - disable SGE operation
2742  *      @adap: the adapter
2743  *
2744  *      Disables the DMA engine.  This can be called in emeregencies (e.g.,
2745  *      from error interrupts) or from normal process context.  In the latter
2746  *      case it also disables any pending queue restart tasklets.  Note that
2747  *      if it is called in interrupt context it cannot disable the restart
2748  *      tasklets as it cannot wait, however the tasklets will have no effect
2749  *      since the doorbells are disabled and the driver will call this again
2750  *      later from process context, at which time the tasklets will be stopped
2751  *      if they are still running.
2752  */
2753 void t3_sge_stop(struct adapter *adap)
2754 {
2755         t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, 0);
2756         if (!in_interrupt()) {
2757                 int i;
2758
2759                 for (i = 0; i < SGE_QSETS; ++i) {
2760                         struct sge_qset *qs = &adap->sge.qs[i];
2761
2762                         tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk);
2763                         tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk);
2764                 }
2765         }
2766 }
2767
2768 /**
2769  *      t3_sge_init - initialize SGE
2770  *      @adap: the adapter
2771  *      @p: the SGE parameters
2772  *
2773  *      Performs SGE initialization needed every time after a chip reset.
2774  *      We do not initialize any of the queue sets here, instead the driver
2775  *      top-level must request those individually.  We also do not enable DMA
2776  *      here, that should be done after the queues have been set up.
2777  */
2778 void t3_sge_init(struct adapter *adap, struct sge_params *p)
2779 {
2780         unsigned int ctrl, ups = ffs(pci_resource_len(adap->pdev, 2) >> 12);
2781
2782         ctrl = F_DROPPKT | V_PKTSHIFT(2) | F_FLMODE | F_AVOIDCQOVFL |
2783             F_CQCRDTCTRL |
2784             V_HOSTPAGESIZE(PAGE_SHIFT - 11) | F_BIGENDIANINGRESS |
2785             V_USERSPACESIZE(ups ? ups - 1 : 0) | F_ISCSICOALESCING;
2786 #if SGE_NUM_GENBITS == 1
2787         ctrl |= F_EGRGENCTRL;
2788 #endif
2789         if (adap->params.rev > 0) {
2790                 if (!(adap->flags & (USING_MSIX | USING_MSI)))
2791                         ctrl |= F_ONEINTMULTQ | F_OPTONEINTMULTQ;
2792                 ctrl |= F_CQCRDTCTRL | F_AVOIDCQOVFL;
2793         }
2794         t3_write_reg(adap, A_SG_CONTROL, ctrl);
2795         t3_write_reg(adap, A_SG_EGR_RCQ_DRB_THRSH, V_HIRCQDRBTHRSH(512) |
2796                      V_LORCQDRBTHRSH(512));
2797         t3_write_reg(adap, A_SG_TIMER_TICK, core_ticks_per_usec(adap) / 10);
2798         t3_write_reg(adap, A_SG_CMDQ_CREDIT_TH, V_THRESHOLD(32) |
2799                      V_TIMEOUT(200 * core_ticks_per_usec(adap)));
2800         t3_write_reg(adap, A_SG_HI_DRB_HI_THRSH, 1000);
2801         t3_write_reg(adap, A_SG_HI_DRB_LO_THRSH, 256);
2802         t3_write_reg(adap, A_SG_LO_DRB_HI_THRSH, 1000);
2803         t3_write_reg(adap, A_SG_LO_DRB_LO_THRSH, 256);
2804         t3_write_reg(adap, A_SG_OCO_BASE, V_BASE1(0xfff));
2805         t3_write_reg(adap, A_SG_DRB_PRI_THRESH, 63 * 1024);
2806 }
2807
2808 /**
2809  *      t3_sge_prep - one-time SGE initialization
2810  *      @adap: the associated adapter
2811  *      @p: SGE parameters
2812  *
2813  *      Performs one-time initialization of SGE SW state.  Includes determining
2814  *      defaults for the assorted SGE parameters, which admins can change until
2815  *      they are used to initialize the SGE.
2816  */
2817 void __devinit t3_sge_prep(struct adapter *adap, struct sge_params *p)
2818 {
2819         int i;
2820
2821         p->max_pkt_size = (16 * 1024) - sizeof(struct cpl_rx_data) -
2822             SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
2823
2824         for (i = 0; i < SGE_QSETS; ++i) {
2825                 struct qset_params *q = p->qset + i;
2826
2827                 q->polling = adap->params.rev > 0;
2828                 q->coalesce_usecs = 5;
2829                 q->rspq_size = 1024;
2830                 q->fl_size = 1024;
2831                 q->jumbo_size = 512;
2832                 q->txq_size[TXQ_ETH] = 1024;
2833                 q->txq_size[TXQ_OFLD] = 1024;
2834                 q->txq_size[TXQ_CTRL] = 256;
2835                 q->cong_thres = 0;
2836         }
2837
2838         spin_lock_init(&adap->sge.reg_lock);
2839 }
2840
2841 /**
2842  *      t3_get_desc - dump an SGE descriptor for debugging purposes
2843  *      @qs: the queue set
2844  *      @qnum: identifies the specific queue (0..2: Tx, 3:response, 4..5: Rx)
2845  *      @idx: the descriptor index in the queue
2846  *      @data: where to dump the descriptor contents
2847  *
2848  *      Dumps the contents of a HW descriptor of an SGE queue.  Returns the
2849  *      size of the descriptor.
2850  */
2851 int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx,
2852                 unsigned char *data)
2853 {
2854         if (qnum >= 6)
2855                 return -EINVAL;
2856
2857         if (qnum < 3) {
2858                 if (!qs->txq[qnum].desc || idx >= qs->txq[qnum].size)
2859                         return -EINVAL;
2860                 memcpy(data, &qs->txq[qnum].desc[idx], sizeof(struct tx_desc));
2861                 return sizeof(struct tx_desc);
2862         }
2863
2864         if (qnum == 3) {
2865                 if (!qs->rspq.desc || idx >= qs->rspq.size)
2866                         return -EINVAL;
2867                 memcpy(data, &qs->rspq.desc[idx], sizeof(struct rsp_desc));
2868                 return sizeof(struct rsp_desc);
2869         }
2870
2871         qnum -= 4;
2872         if (!qs->fl[qnum].desc || idx >= qs->fl[qnum].size)
2873                 return -EINVAL;
2874         memcpy(data, &qs->fl[qnum].desc[idx], sizeof(struct rx_desc));
2875         return sizeof(struct rx_desc);
2876 }