drivers/media/video/bttv-cards.c

   1 /*
   2     $Id: bttv-cards.c,v 1.47 2005/02/22 14:06:32 kraxel Exp $
   3
   4     bttv-cards.c
   5
   6     this file has configuration informations - card-specific stuff
   7     like the big tvcards array for the most part
   8
   9     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
  10                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  11     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  12
  13     This program is free software; you can redistribute it and/or modify
  14     it under the terms of the GNU General Public License as published by
  15     the Free Software Foundation; either version 2 of the License, or
  16     (at your option) any later version.
  17
  18     This program is distributed in the hope that it will be useful,
  19     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21     GNU General Public License for more details.
  22
  23     You should have received a copy of the GNU General Public License
  24     along with this program; if not, write to the Free Software
  25     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26
  27 */
  28
  29 #include <linux/config.h>
  30 #include <linux/delay.h>
  31 #include <linux/module.h>
  32 #include <linux/moduleparam.h>
  33 #include <linux/kmod.h>
  34 #include <linux/init.h>
  35 #include <linux/pci.h>
  36 #include <linux/vmalloc.h>
  37 #include <linux/firmware.h>
  38
  39 #include <asm/io.h>
  40
  41 #include "bttvp.h"
  42 #if 0 /* not working yet */
  43 #include "bt832.h"
  44 #endif
  45
  46 /* fwd decl */
  47 static void boot_msp34xx(struct bttv *btv, int pin);
  48 static void boot_bt832(struct bttv *btv);
  49 static void hauppauge_eeprom(struct bttv *btv);
  50 static void avermedia_eeprom(struct bttv *btv);
  51 static void osprey_eeprom(struct bttv *btv);
  52 static void modtec_eeprom(struct bttv *btv);
  53 static void init_PXC200(struct bttv *btv);
  54
  55 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
  56 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
  57 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
  58                                     int set);
  59 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
  60                                       int set);
  61 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
  62 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
  63 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
  64 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
  65 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
  66 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
  67 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
  68 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
  69 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  70 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  71 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  72 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  73 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  74
  75 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  76
  77 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  78 static void picolo_tetra_init(struct bttv *btv);
  79
  80 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  81 static void tibetCS16_init(struct bttv *btv);
  82
  83 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  84 static void kodicom4400r_init(struct bttv *btv);
  85
  86 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  87 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  88
  89 static int terratec_active_radio_upgrade(struct bttv *btv);
  90 static int tea5757_read(struct bttv *btv);
  91 static int tea5757_write(struct bttv *btv, int value);
  92 static void identify_by_eeprom(struct bttv *btv,
  93                                unsigned char eeprom_data[256]);
  94 static int __devinit pvr_boot(struct bttv *btv);
  95
  96 /* config variables */
  97 static unsigned int triton1=0;
  98 static unsigned int vsfx=0;
  99 static unsigned int latency = UNSET;
 100 static unsigned int no_overlay=-1;
 101
 102 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 103 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 104 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 105 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 106 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 107 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 108 #ifdef MODULE
 109 static unsigned int autoload = 1;
 110 #else
 111 static unsigned int autoload = 0;
 112 #endif
 113 static unsigned int gpiomask = UNSET;
 114 static unsigned int audioall = UNSET;
 115 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 116
 117 /* insmod options */
 118 module_param(triton1,    int, 0444);
 119 module_param(vsfx,       int, 0444);
 120 module_param(no_overlay, int, 0444);
 121 module_param(latency,    int, 0444);
 122 module_param(gpiomask,   int, 0444);
 123 module_param(audioall,   int, 0444);
 124 module_param(autoload,   int, 0444);
 125
 126 module_param_array(card,     int, NULL, 0444);
 127 module_param_array(pll,      int, NULL, 0444);
 128 module_param_array(tuner,    int, NULL, 0444);
 129 module_param_array(svhs,     int, NULL, 0444);
 130 module_param_array(remote,   int, NULL, 0444);
 131 module_param_array(audiomux, int, NULL, 0444);
 132
 133 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 134                  "[enable bug compatibility for triton1 + others]");
 135 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 136                  "[yet another chipset flaw workaround]");
 137 MODULE_PARM_DESC(latency,"pci latency timer");
 138 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 139 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 140 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 141 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
 142
 143 /* ----------------------------------------------------------------------- */
 144 /* list of card IDs for bt878+ cards                                       */
 145
 146 static struct CARD {
 147         unsigned id;
 148         int cardnr;
 149         char *name;
 150 } cards[] __devinitdata = {
 151         { 0x13eb0070, BTTV_HAUPPAUGE878,  "Hauppauge WinTV" },
 152         { 0x39000070, BTTV_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 153         { 0x45000070, BTTV_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 154         { 0xff000070, BTTV_OSPREY1x0,     "Osprey-100" },
 155         { 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
 156         { 0xff020070, BTTV_OSPREY500,     "Osprey-500" },
 157         { 0xff030070, BTTV_OSPREY2000,    "Osprey-2000" },
 158         { 0xff040070, BTTV_OSPREY540,     "Osprey-540" },
 159
 160         { 0x00011002, BTTV_ATI_TVWONDER,  "ATI TV Wonder" },
 161         { 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 162
 163         { 0x6606107d, BTTV_WINFAST2000,   "Leadtek WinFast TV 2000" },
 164         { 0x6607107d, BTTV_WINFASTVC100,  "Leadtek WinFast VC 100" },
 165         { 0x6609107d, BTTV_WINFAST2000,   "Leadtek TV 2000 XP" },
 166         { 0x263610b4, BTTV_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 167         { 0x264510b4, BTTV_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 168         { 0x402010fc, BTTV_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 169         { 0x405010fc, BTTV_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 170         { 0x407010fc, BTTV_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 171         { 0xd01810fc, BTTV_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 172
 173         { 0x001211bd, BTTV_PINNACLE,      "Pinnacle PCTV" },
 174         // some cards ship with byteswapped IDs ...
 175         { 0x1200bd11, BTTV_PINNACLE,      "Pinnacle PCTV [bswap]" },
 176         { 0xff00bd11, BTTV_PINNACLE,      "Pinnacle PCTV [bswap]" },
 177         // this seems to happen as well ...
 178         { 0xff1211bd, BTTV_PINNACLE,      "Pinnacle PCTV" },
 179
 180         { 0x3000121a, BTTV_VOODOOTV_FM,   "3Dfx VoodooTV FM/ VoodooTV 200" },
 181         { 0x263710b4, BTTV_VOODOOTV_FM,   "3Dfx VoodooTV FM/ VoodooTV 200" },
 182         { 0x3060121a, BTTV_STB2,          "3Dfx VoodooTV 100/ STB OEM" },
 183
 184         { 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 185         { 0xa005144f, BTTV_MAGICTVIEW063, "CPH06X TView99-Card" },
 186         { 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 187         { 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 188         { 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" },
 189         { 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
 190         { 0x300214ff, BTTV_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 191
 192         { 0x00011461, BTTV_AVPHONE98,     "AVerMedia TVPhone98" },
 193         { 0x00021461, BTTV_AVERMEDIA98,   "AVermedia TVCapture 98" },
 194         { 0x00031461, BTTV_AVPHONE98,     "AVerMedia TVPhone98" },
 195         { 0x00041461, BTTV_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 196         { 0x03001461, BTTV_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 197
 198         { 0x1117153b, BTTV_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 199         { 0x1118153b, BTTV_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 200         { 0x1119153b, BTTV_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 201         { 0x111a153b, BTTV_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 202
 203         { 0x1123153b, BTTV_TERRATVRADIO,  "Terratec TV Radio+" },
 204         { 0x1127153b, BTTV_TERRATV,       "Terratec TV+ (V1.05)"    },
 205         // clashes with FlyVideo
 206         //{ 0x18521852, BTTV_TERRATV,     "Terratec TV+ (V1.10)"    },
 207         { 0x1134153b, BTTV_TERRATVALUE,   "Terratec TValue (LR102)" },
 208         { 0x1135153b, BTTV_TERRATVALUER,  "Terratec TValue Radio" }, // LR102
 209         { 0x5018153b, BTTV_TERRATVALUE,   "Terratec TValue" },       // ??
 210         { 0xff3b153b, BTTV_TERRATVALUER,  "Terratec TValue Radio" }, // ??
 211
 212         { 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 213         { 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 214         { 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 215         { 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 216         { 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 217
 218         { 0x1430aa00, BTTV_PV143,         "Provideo PV143A" },
 219         { 0x1431aa00, BTTV_PV143,         "Provideo PV143B" },
 220         { 0x1432aa00, BTTV_PV143,         "Provideo PV143C" },
 221         { 0x1433aa00, BTTV_PV143,         "Provideo PV143D" },
 222         { 0x1433aa03, BTTV_PV143,         "Security Eyes" },
 223
 224         { 0x1460aa00, BTTV_PV150,         "Provideo PV150A-1" },
 225         { 0x1461aa01, BTTV_PV150,         "Provideo PV150A-2" },
 226         { 0x1462aa02, BTTV_PV150,         "Provideo PV150A-3" },
 227         { 0x1463aa03, BTTV_PV150,         "Provideo PV150A-4" },
 228
 229         { 0x1464aa04, BTTV_PV150,         "Provideo PV150B-1" },
 230         { 0x1465aa05, BTTV_PV150,         "Provideo PV150B-2" },
 231         { 0x1466aa06, BTTV_PV150,         "Provideo PV150B-3" },
 232         { 0x1467aa07, BTTV_PV150,         "Provideo PV150B-4" },
 233
 234         { 0xa132ff00, BTTV_IVC100,        "IVC-100"  },
 235         { 0xa1550000, BTTV_IVC200,        "IVC-200"  },
 236         { 0xa1550001, BTTV_IVC200,        "IVC-200"  },
 237         { 0xa1550002, BTTV_IVC200,        "IVC-200"  },
 238         { 0xa1550003, BTTV_IVC200,        "IVC-200"  },
 239         { 0xa1550100, BTTV_IVC200,        "IVC-200G" },
 240         { 0xa1550101, BTTV_IVC200,        "IVC-200G" },
 241         { 0xa1550102, BTTV_IVC200,        "IVC-200G" },
 242         { 0xa1550103, BTTV_IVC200,        "IVC-200G" },
 243         { 0xa182ff00, BTTV_IVC120,        "IVC-120G" },
 244         { 0xa182ff01, BTTV_IVC120,        "IVC-120G" },
 245         { 0xa182ff02, BTTV_IVC120,        "IVC-120G" },
 246         { 0xa182ff03, BTTV_IVC120,        "IVC-120G" },
 247         { 0xa182ff04, BTTV_IVC120,        "IVC-120G" },
 248         { 0xa182ff05, BTTV_IVC120,        "IVC-120G" },
 249         { 0xa182ff06, BTTV_IVC120,        "IVC-120G" },
 250         { 0xa182ff07, BTTV_IVC120,        "IVC-120G" },
 251         { 0xa182ff08, BTTV_IVC120,        "IVC-120G" },
 252         { 0xa182ff09, BTTV_IVC120,        "IVC-120G" },
 253         { 0xa182ff0a, BTTV_IVC120,        "IVC-120G" },
 254         { 0xa182ff0b, BTTV_IVC120,        "IVC-120G" },
 255         { 0xa182ff0c, BTTV_IVC120,        "IVC-120G" },
 256         { 0xa182ff0d, BTTV_IVC120,        "IVC-120G" },
 257         { 0xa182ff0e, BTTV_IVC120,        "IVC-120G" },
 258         { 0xa182ff0f, BTTV_IVC120,        "IVC-120G" },
 259
 260         { 0x41424344, BTTV_GRANDTEC,      "GrandTec Multi Capture" },
 261         { 0x01020304, BTTV_XGUARD,        "Grandtec Grand X-Guard" },
 262
 263         { 0x18501851, BTTV_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 264         { 0xa0501851, BTTV_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 265         { 0x18511851, BTTV_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 266         { 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 267         { 0x41a0a051, BTTV_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 268         { 0x18501f7f, BTTV_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 269
 270         { 0x010115cb, BTTV_GMV1,          "AG GMV1" },
 271         { 0x010114c7, BTTV_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 272
 273         { 0x10b42636, BTTV_HAUPPAUGE878,  "STB ???" },
 274         { 0x217d6606, BTTV_WINFAST2000,   "Leadtek WinFast TV 2000" },
 275         { 0xfff6f6ff, BTTV_WINFAST2000,   "Leadtek WinFast TV 2000" },
 276         { 0x03116000, BTTV_SENSORAY311,   "Sensoray 311" },
 277         { 0x00790e11, BTTV_WINDVR,        "Canopus WinDVR PCI" },
 278         { 0xa0fca1a0, BTTV_ZOLTRIX,       "Face to Face Tvmax" },
 279         { 0x20007063, BTTV_PC_HDTV,       "pcHDTV HD-2000 TV"},
 280         { 0x82b2aa6a, BTTV_SIMUS_GVC1100, "SIMUS GVC1100" },
 281         { 0x146caa0c, BTTV_PV951,         "ituner spectra8" },
 282         { 0x200a1295, BTTV_PXC200,        "ImageNation PXC200A" },
 283
 284         { 0x40111554, BTTV_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 285         { 0x17de0a01, BTTV_KWORLD,        "Mecer TV/FM/Video Tuner" },
 286
 287         { 0x01051805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 288         { 0x01061805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 289         { 0x01071805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 290         { 0x01081805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 291
 292         // likely broken, vendor id doesn't match the other magic views ...
 293         //{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
 294
 295         // DVB cards (using pci function .1 for mpeg data xfer)
 296         { 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 297         { 0x07611461, BTTV_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 298         { 0x001c11bd, BTTV_PINNACLESAT,   "Pinnacle PCTV Sat" },
 299         { 0x002611bd, BTTV_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 300         { 0x00011822, BTTV_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 301         { 0xfc00270f, BTTV_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 302         { 0x07711461, BTTV_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 303         { 0xdb1018ac, BTTV_DVICO_DVBT_LITE,    "DVICO FusionHDTV DVB-T Lite" },
 304
 305         { 0, -1, NULL }
 306 };
 307
 308 /* ----------------------------------------------------------------------- */
 309 /* array with description for bt848 / bt878 tv/grabber cards               */
 310
 311 struct tvcard bttv_tvcards[] = {
 312 {
 313 /* ---- card 0x00 ---------------------------------- */
 314         .name           = " *** UNKNOWN/GENERIC *** ",
 315         .video_inputs   = 4,
 316         .audio_inputs   = 1,
 317         .tuner          = 0,
 318         .svhs           = 2,
 319         .muxsel         = { 2, 3, 1, 0},
 320         .tuner_type     = -1,
 321 },{
 322         .name           = "MIRO PCTV",
 323         .video_inputs   = 4,
 324         .audio_inputs   = 1,
 325         .tuner          = 0,
 326         .svhs           = 2,
 327         .gpiomask       = 15,
 328         .muxsel         = { 2, 3, 1, 1},
 329         .audiomux       = { 2, 0, 0, 0, 10},
 330         .needs_tvaudio  = 1,
 331         .tuner_type     = -1,
 332 },{
 333         .name           = "Hauppauge (bt848)",
 334         .video_inputs   = 4,
 335         .audio_inputs   = 1,
 336         .tuner          = 0,
 337         .svhs           = 2,
 338         .gpiomask       = 7,
 339         .muxsel         = { 2, 3, 1, 1},
 340         .audiomux       = { 0, 1, 2, 3, 4},
 341         .needs_tvaudio  = 1,
 342         .tuner_type     = -1,
 343 },{
 344         .name           = "STB, Gateway P/N 6000699 (bt848)",
 345         .video_inputs   = 3,
 346         .audio_inputs   = 1,
 347         .tuner          = 0,
 348         .svhs           = 2,
 349         .gpiomask       = 7,
 350         .muxsel         = { 2, 3, 1, 1},
 351         .audiomux       = { 4, 0, 2, 3, 1},
 352         .no_msp34xx     = 1,
 353         .needs_tvaudio  = 1,
 354         .tuner_type     = TUNER_PHILIPS_NTSC,
 355         .pll            = PLL_28,
 356         .has_radio      = 1,
 357 },{
 358
 359 /* ---- card 0x04 ---------------------------------- */
 360         .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 361         .video_inputs   = 4,
 362         .audio_inputs   = 0,
 363         .tuner          = -1,
 364         .svhs           = 2,
 365         .gpiomask       = 0,
 366         .muxsel         = { 2, 3, 1, 1},
 367         .audiomux       = { 0 },
 368         .needs_tvaudio  = 0,
 369         .tuner_type     = 4,
 370 },{
 371         .name           = "Diamond DTV2000",
 372         .video_inputs   = 4,
 373         .audio_inputs   = 1,
 374         .tuner          = 0,
 375         .svhs           = 2,
 376         .gpiomask       = 3,
 377         .muxsel         = { 2, 3, 1, 0},
 378         .audiomux       = { 0, 1, 0, 1, 3},
 379         .needs_tvaudio  = 1,
 380         .tuner_type     = -1,
 381 },{
 382         .name           = "AVerMedia TVPhone",
 383         .video_inputs   = 3,
 384         .audio_inputs   = 1,
 385         .tuner          = 0,
 386         .svhs           = 3,
 387         .muxsel         = { 2, 3, 1, 1},
 388         .gpiomask       = 0x0f,
 389         .audiomux       = { 0x0c, 0x04, 0x08, 0x04, 0},
 390         /*                0x04 for some cards ?? */
 391         .needs_tvaudio  = 1,
 392         .tuner_type     = -1,
 393         .audio_hook     = avermedia_tvphone_audio,
 394         .has_remote     = 1,
 395 },{
 396         .name           = "MATRIX-Vision MV-Delta",
 397         .video_inputs   = 5,
 398         .audio_inputs   = 1,
 399         .tuner          = -1,
 400         .svhs           = 3,
 401         .gpiomask       = 0,
 402         .muxsel         = { 2, 3, 1, 0, 0},
 403         .audiomux       = {0 },
 404         .needs_tvaudio  = 1,
 405         .tuner_type     = -1,
 406 },{
 407
 408 /* ---- card 0x08 ---------------------------------- */
 409         .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 410         .video_inputs   = 4,
 411         .audio_inputs   = 1,
 412         .tuner          = 0,
 413         .svhs           = 2,
 414         .gpiomask       = 0xc00,
 415         .muxsel         = { 2, 3, 1, 1},
 416         .audiomux       = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
 417         .needs_tvaudio  = 1,
 418         .pll            = PLL_28,
 419         .tuner_type     = -1,
 420 },{
 421         .name           = "IMS/IXmicro TurboTV",
 422         .video_inputs   = 3,
 423         .audio_inputs   = 1,
 424         .tuner          = 0,
 425         .svhs           = 2,
 426         .gpiomask       = 3,
 427         .muxsel         = { 2, 3, 1, 1},
 428         .audiomux       = { 1, 1, 2, 3, 0},
 429         .needs_tvaudio  = 0,
 430         .pll            = PLL_28,
 431         .tuner_type     = TUNER_TEMIC_PAL,
 432 },{
 433         .name           = "Hauppauge (bt878)",
 434         .video_inputs   = 4,
 435         .audio_inputs   = 1,
 436         .tuner          = 0,
 437         .svhs           = 2,
 438         .gpiomask       = 0x0f, /* old: 7 */
 439         .muxsel         = { 2, 0, 1, 1},
 440         .audiomux       = { 0, 1, 2, 3, 4},
 441         .needs_tvaudio  = 1,
 442         .pll            = PLL_28,
 443         .tuner_type     = -1,
 444 },{
 445         .name           = "MIRO PCTV pro",
 446         .video_inputs   = 3,
 447         .audio_inputs   = 1,
 448         .tuner          = 0,
 449         .svhs           = 2,
 450         .gpiomask       = 0x3014f,
 451         .muxsel         = { 2, 3, 1, 1},
 452         .audiomux       = { 0x20001,0x10001, 0, 0,10},
 453         .needs_tvaudio  = 1,
 454         .tuner_type     = -1,
 455 },{
 456
 457 /* ---- card 0x0c ---------------------------------- */
 458         .name           = "ADS Technologies Channel Surfer TV (bt848)",
 459         .video_inputs   = 3,
 460         .audio_inputs   = 1,
 461         .tuner          = 0,
 462         .svhs           = 2,
 463         .gpiomask       = 15,
 464         .muxsel         = { 2, 3, 1, 1},
 465         .audiomux       = { 13, 14, 11, 7, 0, 0},
 466         .needs_tvaudio  = 1,
 467         .tuner_type     = -1,
 468 },{
 469         .name           = "AVerMedia TVCapture 98",
 470         .video_inputs   = 3,
 471         .audio_inputs   = 4,
 472         .tuner          = 0,
 473         .svhs           = 2,
 474         .gpiomask       = 15,
 475         .muxsel         = { 2, 3, 1, 1},
 476         .audiomux       = { 13, 14, 11, 7, 0, 0},
 477         .needs_tvaudio  = 1,
 478         .msp34xx_alt    = 1,
 479         .pll            = PLL_28,
 480         .tuner_type     = TUNER_PHILIPS_PAL,
 481         .audio_hook     = avermedia_tv_stereo_audio,
 482 },{
 483         .name           = "Aimslab Video Highway Xtreme (VHX)",
 484         .video_inputs   = 3,
 485         .audio_inputs   = 1,
 486         .tuner          = 0,
 487         .svhs           = 2,
 488         .gpiomask       = 7,
 489         .muxsel         = { 2, 3, 1, 1},
 490         .audiomux       = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
 491         .needs_tvaudio  = 1,
 492         .pll            = PLL_28,
 493         .tuner_type     = -1,
 494 },{
 495         .name           = "Zoltrix TV-Max",
 496         .video_inputs   = 3,
 497         .audio_inputs   = 1,
 498         .tuner          = 0,
 499         .svhs           = 2,
 500         .gpiomask       = 15,
 501         .muxsel         = { 2, 3, 1, 1},
 502         .audiomux       = {0 , 0, 1 , 0, 10},
 503         .needs_tvaudio  = 1,
 504         .tuner_type     = -1,
 505 },{
 506
 507 /* ---- card 0x10 ---------------------------------- */
 508         .name           = "Prolink Pixelview PlayTV (bt878)",
 509         .video_inputs   = 3,
 510         .audio_inputs   = 1,
 511         .tuner          = 0,
 512         .svhs           = 2,
 513         .gpiomask       = 0x01fe00,
 514         .muxsel         = { 2, 3, 1, 1},
 515 #if 0
 516         // old
 517         .audiomux       = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
 518 #else
 519         // 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru>
 520         .audiomux       = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
 521 #endif
 522         .needs_tvaudio  = 1,
 523         .pll            = PLL_28,
 524         .tuner_type     = -1,
 525 },{
 526         .name           = "Leadtek WinView 601",
 527         .video_inputs   = 3,
 528         .audio_inputs   = 1,
 529         .tuner          = 0,
 530         .svhs           = 2,
 531         .gpiomask       = 0x8300f8,
 532         .muxsel         = { 2, 3, 1, 1,0},
 533         .audiomux       = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
 534         .needs_tvaudio  = 1,
 535         .tuner_type     = -1,
 536         .audio_hook     = winview_audio,
 537         .has_radio      = 1,
 538 },{
 539         .name           = "AVEC Intercapture",
 540         .video_inputs   = 3,
 541         .audio_inputs   = 2,
 542         .tuner          = 0,
 543         .svhs           = 2,
 544         .gpiomask       = 0,
 545         .muxsel         = {2, 3, 1, 1},
 546         .audiomux       = {1, 0, 0, 0, 0},
 547         .needs_tvaudio  = 1,
 548         .tuner_type     = -1,
 549 },{
 550         .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 551         .video_inputs   = 4,
 552         .audio_inputs   = 1,
 553         .tuner          = -1,
 554         .svhs           = -1,
 555         .gpiomask       = 0x8dff00,
 556         .muxsel         = { 2, 3, 1, 1},
 557         .audiomux       = { 0 },
 558         .no_msp34xx     = 1,
 559         .tuner_type     = -1,
 560 },{
 561
 562 /* ---- card 0x14 ---------------------------------- */
 563         .name           = "CEI Raffles Card",
 564         .video_inputs   = 3,
 565         .audio_inputs   = 3,
 566         .tuner          = 0,
 567         .svhs           = 2,
 568         .muxsel         = {2, 3, 1, 1},
 569         .tuner_type     = -1,
 570 },{
 571         .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 572         .video_inputs   = 4,
 573         .audio_inputs   = 2,  // tuner, line in
 574         .tuner          = 0,
 575         .svhs           = 2,
 576         .gpiomask       = 0x1800,
 577         .muxsel         = { 2, 3, 1, 1},
 578         .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800},
 579         .pll            = PLL_28,
 580         .tuner_type     = TUNER_PHILIPS_PAL_I,
 581 },{
 582         .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 583         .video_inputs   = 3,
 584         .audio_inputs   = 1,
 585         .tuner          = 0,
 586         .svhs           = 2,
 587         .gpiomask       = 0xc00,
 588         .muxsel         = { 2, 3, 1, 1},
 589         .audiomux       = {0, 1, 0x800, 0x400, 0xc00, 0},
 590         .needs_tvaudio  = 1,
 591         .pll            = PLL_28,
 592         .tuner_type     = -1,
 593 },{
 594         .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 595         .video_inputs   = 3,
 596         .audio_inputs   = 1,
 597         .tuner          = 0,
 598         .svhs           = -1,
 599         .gpiomask       = 7,
 600         .muxsel         = { 2, 3, -1 },
 601         .digital_mode   = DIGITAL_MODE_CAMERA,
 602         .audiomux       = { 0, 0, 0, 0, 0 },
 603         .no_msp34xx     = 1,
 604         .pll            = PLL_28,
 605         .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 606 },{
 607
 608 /* ---- card 0x18 ---------------------------------- */
 609         .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 610         .video_inputs   = 3,
 611         .audio_inputs   = 1,
 612         .tuner          = 0,
 613         .svhs           = 2,
 614         .gpiomask       = 0xe00,
 615         .muxsel         = { 2, 3, 1, 1},
 616         .audiomux       = {0x400, 0x400, 0x400, 0x400, 0xc00},
 617         .needs_tvaudio  = 1,
 618         .pll            = PLL_28,
 619         .tuner_type     = -1,
 620         .has_remote     = 1,
 621 },{
 622         .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 623         .video_inputs   = 3,
 624         .audio_inputs   = 1,
 625         .tuner          = 0,
 626         .svhs           = 2,
 627         .gpiomask       = 0x1f0fff,
 628         .muxsel         = { 2, 3, 1, 1},
 629         .audiomux       = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
 630         .needs_tvaudio  = 0,
 631         .tuner_type     = TUNER_PHILIPS_PAL,
 632         .audio_hook     = terratv_audio,
 633 },{
 634         .name           = "Hauppauge WinCam newer (bt878)",
 635         .video_inputs   = 4,
 636         .audio_inputs   = 1,
 637         .tuner          = 0,
 638         .svhs           = 3,
 639         .gpiomask       = 7,
 640         .muxsel         = { 2, 0, 1, 1},
 641         .audiomux       = { 0, 1, 2, 3, 4},
 642         .needs_tvaudio  = 1,
 643         .tuner_type     = -1,
 644 },{
 645         .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 646         .video_inputs   = 4,
 647         .audio_inputs   = 2,
 648         .tuner          = 0,
 649         .svhs           = 2,
 650         .gpiomask       = 0x1800,
 651         .muxsel         = { 2, 3, 1, 1},
 652         .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800},
 653         .pll            = PLL_28,
 654         .tuner_type     = TUNER_PHILIPS_SECAM,
 655 },{
 656
 657 /* ---- card 0x1c ---------------------------------- */
 658         .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 659         .video_inputs   = 3,
 660         .audio_inputs   = 1,
 661         .tuner          = 0,
 662         .svhs           = 2,
 663         .gpiomask       = 0x1f0fff,
 664         .muxsel         = { 2, 3, 1, 1},
 665         .audiomux       = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
 666         .needs_tvaudio  = 0,
 667         .tuner_type     = TUNER_PHILIPS_PAL,
 668         .audio_hook     = terratv_audio,
 669         /* GPIO wiring:
 670                External 20 pin connector (for Active Radio Upgrade board)
 671                gpio00: i2c-sda
 672                gpio01: i2c-scl
 673                gpio02: om5610-data
 674                gpio03: om5610-clk
 675                gpio04: om5610-wre
 676                gpio05: om5610-stereo
 677                gpio06: rds6588-davn
 678                gpio07: Pin 7 n.c.
 679                gpio08: nIOW
 680                gpio09+10: nIOR, nSEL ?? (bt878)
 681                 gpio09: nIOR (bt848)
 682                 gpio10: nSEL (bt848)
 683               Sound Routing:
 684                gpio16: u2-A0 (1st 4052bt)
 685                gpio17: u2-A1
 686                gpio18: u2-nEN
 687                gpio19: u4-A0 (2nd 4052)
 688                gpio20: u4-A1
 689                        u4-nEN - GND
 690             Btspy:
 691                 00000 : Cdrom (internal audio input)
 692                 10000 : ext. Video audio input
 693                 20000 : TV Mono
 694                 a0000 : TV Mono/2
 695                1a0000 : TV Stereo
 696                 30000 : Radio
 697                 40000 : Mute
 698        */
 699
 700 },{
 701         /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 702         .name           = "Imagenation PXC200",
 703         .video_inputs   = 5,
 704         .audio_inputs   = 1,
 705         .tuner          = -1,
 706         .svhs           = 1, /* was: 4 */
 707         .gpiomask       = 0,
 708         .muxsel         = { 2, 3, 1, 0, 0},
 709         .audiomux       = { 0 },
 710         .needs_tvaudio  = 1,
 711         .tuner_type     = -1,
 712         .muxsel_hook    = PXC200_muxsel,
 713
 714 },{
 715         .name           = "Lifeview FlyVideo 98 LR50",
 716         .video_inputs   = 4,
 717         .audio_inputs   = 1,
 718         .tuner          = 0,
 719         .svhs           = 2,
 720         .gpiomask       = 0x1800,  //0x8dfe00
 721         .muxsel         = { 2, 3, 1, 1},
 722         .audiomux       = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
 723         .pll            = PLL_28,
 724         .tuner_type     = -1,
 725 },{
 726         .name           = "Formac iProTV, Formac ProTV I (bt848)",
 727         .video_inputs   = 4,
 728         .audio_inputs   = 1,
 729         .tuner          = 0,
 730         .svhs           = 3,
 731         .gpiomask       = 1,
 732         .muxsel         = { 2, 3, 1, 1},
 733         .audiomux       = { 1, 0, 0, 0, 0 },
 734         .pll            = PLL_28,
 735         .tuner_type     = TUNER_PHILIPS_PAL,
 736 },{
 737
 738 /* ---- card 0x20 ---------------------------------- */
 739         .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 740         .video_inputs   = 4,
 741         .audio_inputs   = 0,
 742         .tuner          = -1,
 743         .svhs           = 2,
 744         .gpiomask       = 0,
 745         .muxsel         = { 2, 3, 1, 1},
 746         .audiomux       = { 0 },
 747         .needs_tvaudio  = 0,
 748         .tuner_type     = 4,
 749 },{
 750         .name           = "Terratec TerraTValue Version Bt878",
 751         .video_inputs   = 3,
 752         .audio_inputs   = 1,
 753         .tuner          = 0,
 754         .svhs           = 2,
 755         .gpiomask       = 0xffff00,
 756         .muxsel         = { 2, 3, 1, 1},
 757         .audiomux       = { 0x500, 0, 0x300, 0x900, 0x900},
 758         .needs_tvaudio  = 1,
 759         .pll            = PLL_28,
 760         .tuner_type     = TUNER_PHILIPS_PAL,
 761 },{
 762         .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 763         .video_inputs   = 4,
 764         .audio_inputs   = 1,
 765         .tuner          = 0,
 766         .svhs           = 2,
 767         .muxsel         = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
 768 #if 0
 769         .gpiomask       = 0xc33000,
 770         .audiomux       = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
 771 #else
 772         /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 773         .gpiomask       = 0xb33000,
 774         .audiomux       = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
 775 #endif
 776         /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 777                 gpio23 -- hef4052:nEnable (0x800000)
 778                 gpio12 -- hef4052:A1
 779                 gpio13 -- hef4052:A0
 780             0x0000: external audio
 781             0x1000: FM
 782             0x2000: TV
 783             0x3000: n.c.
 784           Note: There exists another variant "Winfast 2000" with tv stereo !?
 785           Note: eeprom only contains FF and pci subsystem id 107d:6606
 786          */
 787         .needs_tvaudio  = 0,
 788         .pll            = PLL_28,
 789         .has_radio      = 1,
 790         .tuner_type     = 5, // default for now, gpio reads BFFF06 for Pal bg+dk
 791         .audio_hook     = winfast2000_audio,
 792         .has_remote     = 1,
 793 },{
 794         .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 795         .video_inputs   = 4,
 796         .audio_inputs   = 3,
 797         .tuner          = 0,
 798         .svhs           = 2,
 799         .gpiomask       = 0x1800,
 800         .muxsel         = { 2, 3, 1, 1},
 801         .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800},
 802         .pll            = PLL_28,
 803         .tuner_type     = -1,
 804 },{
 805
 806 /* ---- card 0x24 ---------------------------------- */
 807         .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 808         .video_inputs   = 4,
 809         .audio_inputs   = 3,
 810         .tuner          = 0,
 811         .svhs           = 2,
 812         .gpiomask       = 0x1800,
 813         .muxsel         = { 2, 3, 1, 1},
 814         .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
 815         .pll            = PLL_28,
 816         .tuner_type     = -1,
 817         .has_radio      = 1,
 818 },{
 819         .name           = "Prolink PixelView PlayTV pro",
 820         .video_inputs   = 3,
 821         .audio_inputs   = 1,
 822         .tuner          = 0,
 823         .svhs           = 2,
 824         .gpiomask       = 0xff,
 825         .muxsel         = { 2, 3, 1, 1 },
 826         .audiomux       = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
 827         .no_msp34xx     = 1,
 828         .pll            = PLL_28,
 829         .tuner_type     = -1,
 830 },{
 831         .name           = "Askey CPH06X TView99",
 832         .video_inputs   = 4,
 833         .audio_inputs   = 1,
 834         .tuner          = 0,
 835         .svhs           = 2,
 836         .gpiomask       = 0x551e00,
 837         .muxsel         = { 2, 3, 1, 0},
 838         .audiomux       = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
 839         .needs_tvaudio  = 1,
 840         .pll            = PLL_28,
 841         .tuner_type     = 1,
 842         .has_remote     = 1,
 843 },{
 844         .name           = "Pinnacle PCTV Studio/Rave",
 845         .video_inputs   = 3,
 846         .audio_inputs   = 1,
 847         .tuner          = 0,
 848         .svhs           = 2,
 849         .gpiomask       = 0x03000F,
 850         .muxsel         = { 2, 3, 1, 1},
 851         .audiomux       = { 2, 0xd0001, 0, 0, 1},
 852         .needs_tvaudio  = 0,
 853         .pll            = PLL_28,
 854         .tuner_type     = -1,
 855 },{
 856
 857 /* ---- card 0x28 ---------------------------------- */
 858         .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 859         .video_inputs   = 3,
 860         .audio_inputs   = 1,
 861         .tuner          = 0,
 862         .svhs           = 2,
 863         .gpiomask       = 7,
 864         .muxsel         = { 2, 3, 1, 1},
 865         .audiomux       = { 4, 0, 2, 3, 1},
 866         .no_msp34xx     = 1,
 867         .needs_tvaudio  = 1,
 868         .tuner_type     = TUNER_PHILIPS_NTSC,
 869         .pll            = PLL_28,
 870         .has_radio      = 1,
 871 },{
 872         .name           = "AVerMedia TVPhone 98",
 873         .video_inputs   = 3,
 874         .audio_inputs   = 4,
 875         .tuner          = 0,
 876         .svhs           = 2,
 877         .gpiomask       = 15,
 878         .muxsel         = { 2, 3, 1, 1},
 879         .audiomux       = { 13, 4, 11, 7, 0, 0},
 880         .needs_tvaudio  = 1,
 881         .pll            = PLL_28,
 882         .tuner_type     = -1,
 883         .has_radio      = 1,
 884         .audio_hook     = avermedia_tvphone_audio,
 885 },{
 886         .name           = "ProVideo PV951", /* pic16c54 */
 887         .video_inputs   = 3,
 888         .audio_inputs   = 1,
 889         .tuner          = 0,
 890         .svhs           = 2,
 891         .gpiomask       = 0,
 892         .muxsel         = { 2, 3, 1, 1},
 893         .audiomux       = { 0, 0, 0, 0, 0},
 894         .needs_tvaudio  = 1,
 895         .no_msp34xx     = 1,
 896         .pll            = PLL_28,
 897         .tuner_type     = 1,
 898 },{
 899         .name           = "Little OnAir TV",
 900         .video_inputs   = 3,
 901         .audio_inputs   = 1,
 902         .tuner          = 0,
 903         .svhs           = 2,
 904         .gpiomask       = 0xe00b,
 905         .muxsel         = {2, 3, 1, 1},
 906         .audiomux       = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
 907         .no_msp34xx     = 1,
 908         .tuner_type     = -1,
 909 },{
 910
 911 /* ---- card 0x2c ---------------------------------- */
 912         .name           = "Sigma TVII-FM",
 913         .video_inputs   = 2,
 914         .audio_inputs   = 1,
 915         .tuner          = 0,
 916         .svhs           = -1,
 917         .gpiomask       = 3,
 918         .muxsel         = {2, 3, 1, 1},
 919         .audiomux       = {1, 1, 0, 2, 3},
 920         .no_msp34xx     = 1,
 921         .pll            = PLL_NONE,
 922         .tuner_type     = -1,
 923 },{
 924         .name           = "MATRIX-Vision MV-Delta 2",
 925         .video_inputs   = 5,
 926         .audio_inputs   = 1,
 927         .tuner          = -1,
 928         .svhs           = 3,
 929         .gpiomask       = 0,
 930         .muxsel         = { 2, 3, 1, 0, 0},
 931         .audiomux       = {0 },
 932         .no_msp34xx     = 1,
 933         .pll            = PLL_28,
 934         .tuner_type     = -1,
 935 },{
 936         .name           = "Zoltrix Genie TV/FM",
 937         .video_inputs   = 3,
 938         .audio_inputs   = 1,
 939         .tuner          = 0,
 940         .svhs           = 2,
 941         .gpiomask       = 0xbcf03f,
 942         .muxsel         = { 2, 3, 1, 1},
 943         .audiomux       = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
 944         .no_msp34xx     = 1,
 945         .pll            = PLL_28,
 946         .tuner_type     = 21,
 947 },{
 948         .name           = "Terratec TV/Radio+",
 949         .video_inputs   = 3,
 950         .audio_inputs   = 1,
 951         .tuner          = 0,
 952         .svhs           = 2,
 953         .gpiomask       = 0x70000,
 954         .muxsel         = { 2, 3, 1, 1},
 955         .audiomux       = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
 956         .needs_tvaudio  = 1,
 957         .no_msp34xx     = 1,
 958         .pll            = PLL_35,
 959         .tuner_type     = 1,
 960         .has_radio      = 1,
 961 },{
 962
 963 /* ---- card 0x30 ---------------------------------- */
 964         .name           = "Askey CPH03x/ Dynalink Magic TView",
 965         .video_inputs   = 3,
 966         .audio_inputs   = 1,
 967         .tuner          = 0,
 968         .svhs           = 2,
 969         .gpiomask       = 15,
 970         .muxsel         = { 2, 3, 1, 1},
 971         .audiomux       = {2,0,0,0,1},
 972         .needs_tvaudio  = 1,
 973         .pll            = PLL_28,
 974         .tuner_type     = -1,
 975 },{
 976         .name           = "IODATA GV-BCTV3/PCI",
 977         .video_inputs   = 3,
 978         .audio_inputs   = 1,
 979         .tuner          = 0,
 980         .svhs           = 2,
 981         .gpiomask       = 0x010f00,
 982         .muxsel         = {2, 3, 0, 0},
 983         .audiomux       = {0x10000, 0, 0x10000, 0, 0, 0},
 984         .no_msp34xx     = 1,
 985         .pll            = PLL_28,
 986         .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
 987         .audio_hook     = gvbctv3pci_audio,
 988 },{
 989         .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
 990         .video_inputs   = 5,
 991         .audio_inputs   = 1,
 992         .tuner          = 0,
 993         .svhs           = 3,
 994         .gpiomask       = 0xAA0000,
 995         .muxsel         = { 2,3,1,1,-1 },
 996         .digital_mode   = DIGITAL_MODE_CAMERA,
 997         .audiomux       = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000  },
 998         .no_msp34xx     = 1,
 999         .pll            = PLL_28,
1000         .tuner_type     = TUNER_PHILIPS_PAL_I,
1001         .has_remote     = 1,
1002         /* GPIO wiring: (different from Rev.4C !)
1003                 GPIO17: U4.A0 (first hef4052bt)
1004                 GPIO19: U4.A1
1005                 GPIO20: U5.A1 (second hef4052bt)
1006                 GPIO21: U4.nEN
1007                 GPIO22: BT832 Reset Line
1008                 GPIO23: A5,A0, U5,nEN
1009            Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1010          */
1011 },{
1012         .name           = "Eagle Wireless Capricorn2 (bt878A)",
1013         .video_inputs   = 4,
1014         .audio_inputs   = 1,
1015         .tuner          = 0,
1016         .svhs           = 2,
1017         .gpiomask       = 7,
1018         .muxsel         = { 2, 0, 1, 1},
1019         .audiomux       = { 0, 1, 2, 3, 4},
1020         .pll            = PLL_28,
1021         .tuner_type     = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1022 },{
1023
1024 /* ---- card 0x34 ---------------------------------- */
1025         /* David Härdeman <david@2gen.com> */
1026         .name           = "Pinnacle PCTV Studio Pro",
1027         .video_inputs   = 4,
1028         .audio_inputs   = 1,
1029         .tuner          = 0,
1030         .svhs           = 3,
1031         .gpiomask       = 0x03000F,
1032         .muxsel         = { 2, 3, 1, 1},
1033         .audiomux       = { 1, 0xd0001, 0, 0, 10},
1034                         /* sound path (5 sources):
1035                            MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1036                                 0= ext. Audio IN
1037                                 1= from MUX2
1038                                 2= Mono TV sound from Tuner
1039                                 3= not connected
1040                            MUX2 (mask 0x30000):
1041                                 0,2,3= from MSP34xx
1042                                 1= FM stereo Radio from Tuner */
1043         .needs_tvaudio  = 0,
1044         .pll            = PLL_28,
1045         .tuner_type     = -1,
1046 },{
1047         /* Claas Langbehn <claas@bigfoot.com>,
1048            Sven Grothklags <sven@upb.de> */
1049         .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1050         .video_inputs   = 4,
1051         .audio_inputs   = 3,
1052         .tuner          = 0,
1053         .svhs           = 2,
1054         .gpiomask       = 0x1c,
1055         .muxsel         = { 2, 3, 1, 1},
1056         .audiomux       = { 0, 0, 0x10, 8, 4 },
1057         .needs_tvaudio  = 1,
1058         .pll            = PLL_28,
1059         .tuner_type     = TUNER_PHILIPS_PAL,
1060         .has_radio      = 1,
1061 },{
1062         /* Tim Röstermundt <rosterm@uni-muenster.de>
1063            in de.comp.os.unix.linux.hardware:
1064                 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1065                 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1066                 options tuner type=5 */
1067         .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1068         .video_inputs   = 4,
1069         .audio_inputs   = 1,
1070         .tuner          = 0,
1071         .svhs           = 2,
1072         .gpiomask       = 0x18e0,
1073         .muxsel         = { 2, 3, 1, 1},
1074         .audiomux       = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1075                        /* For cards with tda9820/tda9821:
1076                           0x0000: Tuner normal stereo
1077                           0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1078                           0x0880: Tuner A2 stereo */
1079         .pll            = PLL_28,
1080         .tuner_type     = -1,
1081 },{
1082         /* Miguel Angel Alvarez <maacruz@navegalia.com>
1083            old Easy TV BT848 version (model CPH031) */
1084         .name           = "Askey CPH031/ BESTBUY Easy TV",
1085         .video_inputs   = 4,
1086         .audio_inputs   = 1,
1087         .tuner          = 0,
1088         .svhs           = 2,
1089         .gpiomask       = 0xF,
1090         .muxsel         = { 2, 3, 1, 0},
1091         .audiomux       = { 2, 0, 0, 0, 10},
1092         .needs_tvaudio  = 0,
1093         .pll            = PLL_28,
1094         .tuner_type     = TUNER_TEMIC_PAL,
1095 },{
1096
1097 /* ---- card 0x38 ---------------------------------- */
1098         /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1099         .name           = "Lifeview FlyVideo 98FM LR50",
1100         .video_inputs   = 4,
1101         .audio_inputs   = 3,
1102         .tuner          = 0,
1103         .svhs           = 2,
1104         .gpiomask       = 0x1800,
1105         .muxsel         = { 2, 3, 1, 1},
1106         .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1107         .pll            = PLL_28,
1108         .tuner_type     = 5,
1109 },{
1110         /* This is the ultimate cheapo capture card
1111          * just a BT848A on a small PCB!
1112          * Steve Hosgood <steve@equiinet.com> */
1113         .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1114         .video_inputs   = 2,
1115         .audio_inputs   = 0,
1116         .tuner          = -1,
1117         .svhs           = 1,
1118         .gpiomask       = 0,
1119         .muxsel         = { 3, 1 },
1120         .audiomux       = { 0 },
1121         .needs_tvaudio  = 0,
1122         .no_msp34xx     = 1,
1123         .pll            = PLL_35,
1124         .tuner_type     = -1,
1125 },{
1126         /* Daniel Herrington <daniel.herrington@home.com> */
1127         .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1128         .video_inputs   = 3,
1129         .audio_inputs   = 1,
1130         .tuner          = 0,
1131         .svhs           = 2,
1132         .gpiomask       = 0xe00,
1133         .muxsel         = { 2, 3, 1, 1},
1134         .audiomux       = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1135         .needs_tvaudio  = 1,
1136         .pll            = PLL_28,
1137         .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1138 },{
1139         /* Matti Mottus <mottus@physic.ut.ee> */
1140         .name           = "Askey CPH03x TV Capturer",
1141         .video_inputs   = 4,
1142         .audio_inputs   = 1,
1143         .tuner          = 0,
1144         .svhs           = 2,
1145         .gpiomask       = 0x03000F,
1146         .muxsel         = { 2, 3, 1, 0},
1147         .audiomux       = { 2,0,0,0,1 },
1148         .pll            = PLL_28,
1149         .tuner_type     = 0,
1150 },{
1151
1152 /* ---- card 0x3c ---------------------------------- */
1153         /* Philip Blundell <philb@gnu.org> */
1154         .name           = "Modular Technology MM100PCTV",
1155         .video_inputs   = 2,
1156         .audio_inputs   = 2,
1157         .tuner          = 0,
1158         .svhs           = -1,
1159         .gpiomask       = 11,
1160         .muxsel         = { 2, 3, 1, 1},
1161         .audiomux       = { 2, 0, 0, 1, 8},
1162         .pll            = PLL_35,
1163         .tuner_type     = TUNER_TEMIC_PAL,
1164
1165 },{
1166         /* Adrian Cox <adrian@humboldt.co.uk */
1167         .name           = "AG Electronics GMV1",
1168         .video_inputs   = 2,
1169         .audio_inputs   = 0,
1170         .tuner          = -1,
1171         .svhs           = 1,
1172         .gpiomask       = 0xF,
1173         .muxsel         = { 2, 2},
1174         .audiomux       = { },
1175         .no_msp34xx     = 1,
1176         .needs_tvaudio  = 0,
1177         .pll            = PLL_28,
1178         .tuner_type     = -1,
1179 },{
1180         /* Miguel Angel Alvarez <maacruz@navegalia.com>
1181            new Easy TV BT878 version (model CPH061)
1182            special thanks to Informatica Mieres for providing the card */
1183         .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1184         .video_inputs   = 3,
1185         .audio_inputs   = 2,
1186         .tuner          = 0,
1187         .svhs           = 2,
1188         .gpiomask       = 0xFF,
1189         .muxsel         = { 2, 3, 1, 0},
1190         .audiomux       = { 1, 0, 4, 4, 9},
1191         .needs_tvaudio  = 0,
1192         .pll            = PLL_28,
1193         .tuner_type     = TUNER_PHILIPS_PAL,
1194 },{
1195         /* Lukas Gebauer <geby@volny.cz> */
1196         .name           = "ATI TV-Wonder",
1197         .video_inputs   = 3,
1198         .audio_inputs   = 1,
1199         .tuner          = 0,
1200         .svhs           = 2,
1201         .gpiomask       = 0xf03f,
1202         .muxsel         = { 2, 3, 1, 0 },
1203         .audiomux       = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
1204         .pll            = PLL_28,
1205         .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1206 },{
1207
1208 /* ---- card 0x40 ---------------------------------- */
1209         /* Lukas Gebauer <geby@volny.cz> */
1210         .name           = "ATI TV-Wonder VE",
1211         .video_inputs   = 2,
1212         .audio_inputs   = 1,
1213         .tuner          = 0,
1214         .svhs           = -1,
1215         .gpiomask       = 1,
1216         .muxsel         = { 2, 3, 0, 1},
1217         .audiomux       = { 0, 0, 1, 0, 0},
1218         .no_msp34xx     = 1,
1219         .pll            = PLL_28,
1220         .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1221 },{
1222         /* DeeJay <deejay@westel900.net (2000S) */
1223         .name           = "Lifeview FlyVideo 2000S LR90",
1224         .video_inputs   = 3,
1225         .audio_inputs   = 3,
1226         .tuner          = 0,
1227         .svhs           = 2,
1228         .gpiomask       = 0x18e0,
1229         .muxsel         = { 2, 3, 0, 1},
1230                         /* Radio changed from 1e80 to 0x800 to make
1231                            FlyVideo2000S in .hu happy (gm)*/
1232                         /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1233         .audiomux       = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1234         .audio_hook     = fv2000s_audio,
1235         .no_msp34xx     = 1,
1236         .no_tda9875     = 1,
1237         .needs_tvaudio  = 1,
1238         .pll            = PLL_28,
1239         .tuner_type     = 5,
1240 },{
1241         .name           = "Terratec TValueRadio",
1242         .video_inputs   = 3,
1243         .audio_inputs   = 1,
1244         .tuner          = 0,
1245         .svhs           = 2,
1246         .gpiomask       = 0xffff00,
1247         .muxsel         = { 2, 3, 1, 1},
1248         .audiomux       = { 0x500, 0x500, 0x300, 0x900, 0x900},
1249         .needs_tvaudio  = 1,
1250         .pll            = PLL_28,
1251         .tuner_type     = TUNER_PHILIPS_PAL,
1252         .has_radio      = 1,
1253 },{
1254         /* TANAKA Kei <peg00625@nifty.com> */
1255         .name           = "IODATA GV-BCTV4/PCI",
1256         .video_inputs   = 3,
1257         .audio_inputs   = 1,
1258         .tuner          = 0,
1259         .svhs           = 2,
1260         .gpiomask       = 0x010f00,
1261         .muxsel         = {2, 3, 0, 0},
1262         .audiomux       = {0x10000, 0, 0x10000, 0, 0, 0},
1263         .no_msp34xx     = 1,
1264         .pll            = PLL_28,
1265         .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1266         .audio_hook     = gvbctv3pci_audio,
1267 },{
1268
1269 /* ---- card 0x44 ---------------------------------- */
1270         .name           = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1271         // try "insmod msp3400 simple=0" if you have
1272         // sound problems with this card.
1273         .video_inputs   = 4,
1274         .audio_inputs   = 1,
1275         .tuner          = 0,
1276         .svhs           = -1,
1277         .gpiomask       = 0x4f8a00,
1278         // 0x100000: 1=MSP enabled (0=disable again)
1279         // 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
1280         .audiomux       = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1281         // tvtuner, radio,   external,internal, mute,  stereo
1282         /* tuner, Composit, SVid, Composit-on-Svid-adapter*/
1283         .muxsel         = { 2, 3 ,0 ,1},
1284         .tuner_type     = TUNER_MT2032,
1285         .pll            = PLL_28,
1286         .has_radio      = 1,
1287 },{
1288         /* Philip Blundell <pb@nexus.co.uk> */
1289         .name           = "Active Imaging AIMMS",
1290         .video_inputs   = 1,
1291         .audio_inputs   = 0,
1292         .tuner          = -1,
1293         .tuner_type     = -1,
1294         .pll            = PLL_28,
1295         .muxsel         = { 2 },
1296         .gpiomask       = 0
1297 },{
1298         /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1299         .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1300         .video_inputs   = 3,
1301         .audio_inputs   = 4,
1302         .tuner          = 0,
1303         .svhs           = 2,
1304         .gpiomask       = 15,
1305         .muxsel         = { 2, 3, 1, 1},
1306         .audiomux       = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
1307         .needs_tvaudio  = 1,
1308         .pll            = PLL_28,
1309         .tuner_type     = 25,
1310         .has_remote     = 1,
1311         /* GPIO wiring:
1312                 GPIO0: U4.A0 (hef4052bt)
1313                 GPIO1: U4.A1
1314                 GPIO2: U4.A1 (second hef4052bt)
1315                 GPIO3: U4.nEN, U5.A0, A5.nEN
1316                 GPIO8-15: vrd866b ?
1317          */
1318 },{
1319         .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1320         .video_inputs   = 4,
1321         .audio_inputs   = 0,
1322         .tuner          = -1,
1323         .svhs           = 2,
1324         .muxsel         = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
1325         .pll            = PLL_28,
1326         .no_msp34xx     = 1,
1327 },{
1328
1329 /* ---- card 0x48 ---------------------------------- */
1330         /* Dariusz Kowalewski <darekk@automex.pl> */
1331         .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1332         .video_inputs   = 4,
1333         .audio_inputs   = 1,
1334         .tuner          = 0,
1335         .svhs           = 2,
1336         .gpiomask       = 0x3f,
1337         .muxsel         = { 2, 3, 1, 1 },
1338         .audiomux       = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1339         .needs_tvaudio  = 1,
1340         .no_msp34xx     = 1,
1341         .no_tda9875     = 1,
1342         .pll            = PLL_28,
1343         .tuner_type     = 5,
1344         .audio_hook     = pvbt878p9b_audio, // Note: not all cards have stereo
1345         .has_radio      = 1,  // Note: not all cards have radio
1346         .has_remote     = 1,
1347         /* GPIO wiring:
1348                 GPIO0: A0 hef4052
1349                 GPIO1: A1 hef4052
1350                 GPIO3: nEN hef4052
1351                 GPIO8-15: vrd866b
1352                 GPIO20,22,23: R30,R29,R28
1353          */
1354 },{
1355         /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1356         /* you must jumper JP5 for the card to work */
1357         .name           = "Sensoray 311",
1358         .video_inputs   = 5,
1359         .audio_inputs   = 0,
1360         .tuner          = -1,
1361         .svhs           = 4,
1362         .gpiomask       = 0,
1363         .muxsel         = { 2, 3, 1, 0, 0},
1364         .audiomux       = { 0 },
1365         .needs_tvaudio  = 0,
1366         .tuner_type     = -1,
1367 },{
1368         /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1369         .name           = "RemoteVision MX (RV605)",
1370         .video_inputs   = 16,
1371         .audio_inputs   = 0,
1372         .tuner          = -1,
1373         .svhs           = -1,
1374         .gpiomask       = 0x00,
1375         .gpiomask2      = 0x07ff,
1376         .muxsel         = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1377                           0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1378         .no_msp34xx     = 1,
1379         .no_tda9875     = 1,
1380         .tuner_type     = -1,
1381         .muxsel_hook    = rv605_muxsel,
1382 },{
1383         .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1384         .video_inputs   = 3,
1385         .audio_inputs   = 2,
1386         .tuner          = 0,
1387         .svhs           = 2,
1388         .gpiomask       = 0x1C800F,  // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
1389         .muxsel         = { 2, 1, 1, },
1390         .audiomux       = { 0, 1, 2, 2, 4 },
1391         .needs_tvaudio  = 0,
1392         .tuner_type     = TUNER_PHILIPS_PAL,
1393         .pll            = PLL_28,
1394         .has_radio      = 1,
1395 },{
1396
1397 /* ---- card 0x4c ---------------------------------- */
1398         /* Masaki Suzuki <masaki@btree.org> */
1399         .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1400         .video_inputs   = 3,
1401         .audio_inputs   = 1,
1402         .tuner          = 0,
1403         .svhs           = 2,
1404         .gpiomask       = 0x140007,
1405         .muxsel         = { 2, 3, 1, 1 },
1406         .audiomux       = { 0, 1, 2, 3, 4, 0 },
1407         .tuner_type     = TUNER_PHILIPS_NTSC,
1408         .audio_hook     = windvr_audio,
1409 },{
1410         .name           = "GrandTec Multi Capture Card (Bt878)",
1411         .video_inputs   = 4,
1412         .audio_inputs   = 0,
1413         .tuner          = -1,
1414         .svhs           = -1,
1415         .gpiomask       = 0,
1416         .muxsel         = { 2, 3, 1, 0 },
1417         .audiomux       = { 0 },
1418         .needs_tvaudio  = 0,
1419         .no_msp34xx     = 1,
1420         .pll            = PLL_28,
1421         .tuner_type     = -1,
1422 },{
1423         .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1424         .video_inputs   = 4,
1425         .audio_inputs   = 3,
1426         .tuner          = 0,
1427         .svhs           = 2,
1428         .gpiomask       = 7,
1429         .muxsel         = { 2, 3, 1, 1 },   // Tuner, SVid, SVHS, SVid to SVHS connector
1430         .audiomux       = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
1431                                           // This card lacks external Audio In, so we mute it on Ext. & Int.
1432                                           // The PCB can take a sbx1637/sbx1673, wiring unknown.
1433                                           // This card lacks PCI subsystem ID, sigh.
1434                                           // audiomux=1: lower volume, 2+3: mute
1435                                           // btwincap uses 0x80000/0x80003
1436         .needs_tvaudio  = 0,
1437         .no_msp34xx     = 1,
1438         .pll            = PLL_28,
1439         .tuner_type     = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1440                            // radio signal strength indicators work fine.
1441         .has_radio              = 1,
1442         /* GPIO Info:
1443                 GPIO0,1:   HEF4052 A0,A1
1444                 GPIO2:     HEF4052 nENABLE
1445                 GPIO3-7:   n.c.
1446                 GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1447                 GPIO14,15: ??
1448                 GPIO16-21: n.c.
1449                 GPIO22,23: ??
1450                 ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1451 },{
1452         /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1453         .name           = "DSP Design TCVIDEO",
1454         .video_inputs   = 4,
1455         .svhs           = -1,
1456         .muxsel         = { 2, 3, 1, 0},
1457         .pll            = PLL_28,
1458         .tuner_type     = -1,
1459 },{
1460
1461         /* ---- card 0x50 ---------------------------------- */
1462         .name           = "Hauppauge WinTV PVR",
1463         .video_inputs   = 4,
1464         .audio_inputs   = 1,
1465         .tuner          = 0,
1466         .svhs           = 2,
1467         .muxsel         = { 2, 0, 1, 1},
1468         .needs_tvaudio  = 1,
1469         .pll            = PLL_28,
1470         .tuner_type     = -1,
1471
1472         .gpiomask       = 7,
1473         .audiomux       = {7},
1474 },{
1475         .name           = "IODATA GV-BCTV5/PCI",
1476         .video_inputs   = 3,
1477         .audio_inputs   = 1,
1478         .tuner          = 0,
1479         .svhs           = 2,
1480         .gpiomask       = 0x0f0f80,
1481         .muxsel         = {2, 3, 1, 0},
1482         .audiomux       = {0x030000, 0x010000, 0, 0, 0x020000, 0},
1483         .no_msp34xx     = 1,
1484         .pll            = PLL_28,
1485         .tuner_type     = TUNER_PHILIPS_NTSC_M,
1486         .audio_hook     = gvbctv5pci_audio,
1487         .has_radio      = 1,
1488 },{
1489         .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1490         .video_inputs   = 4,                  /* id-inputs-clock */
1491         .audio_inputs   = 0,
1492         .tuner          = -1,
1493         .svhs           = 3,
1494         .muxsel         = { 3, 2, 0, 1 },
1495         .pll            = PLL_28,
1496         .tuner_type     = -1,
1497         .no_msp34xx     = 1,
1498         .no_tda9875     = 1,
1499         .no_tda7432     = 1,
1500 },{
1501         .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1502         .video_inputs   = 3,
1503         .audio_inputs   = 0,
1504         .tuner          = -1,
1505         .svhs           = 2,
1506         .muxsel         = { 2, 3, 1 },
1507         .pll            = PLL_28,
1508         .tuner_type     = -1,
1509         .no_msp34xx     = 1,
1510         .no_tda9875     = 1,
1511         .no_tda7432     = 1,
1512 },{
1513
1514         /* ---- card 0x54 ---------------------------------- */
1515         .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1516         .video_inputs   = 2,
1517         .audio_inputs   = 0,
1518         .tuner          = -1,
1519         .svhs           = 1,
1520         .muxsel         = { 3, 1 },
1521         .pll            = PLL_28,
1522         .tuner_type     = -1,
1523         .no_msp34xx     = 1,
1524         .no_tda9875     = 1,
1525         .no_tda7432     = 1,
1526 },{
1527         .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1528         .video_inputs   = 1,
1529         .audio_inputs   = 0,
1530         .tuner          = -1,
1531         .svhs           = -1,
1532         .muxsel         = { 0 },
1533         .pll            = PLL_28,
1534         .tuner_type     = -1,
1535         .no_msp34xx     = 1,
1536         .no_tda9875     = 1,
1537         .no_tda7432     = 1,
1538 },{
1539         .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1540         .video_inputs   = 2,
1541         .audio_inputs   = 0,
1542         .tuner          = -1,
1543         .svhs           = 1,
1544         .muxsel         = { 0, 1 },
1545         .pll            = PLL_28,
1546         .tuner_type     = -1,
1547         .no_msp34xx     = 1,
1548         .no_tda9875     = 1,
1549         .no_tda7432     = 1,
1550 },{
1551         .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1552         .video_inputs   = 1,
1553         .audio_inputs   = 1,
1554         .tuner          = -1,
1555         .svhs           = -1,
1556         .muxsel         = { 0 },
1557         .pll            = PLL_28,
1558         .tuner_type     = -1,
1559         .no_msp34xx     = 1,
1560         .no_tda9875     = 1,
1561         .no_tda7432     = 1,
1562 },{
1563
1564         /* ---- card 0x58 ---------------------------------- */
1565         .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1566         .video_inputs   = 2,
1567         .audio_inputs   = 1,
1568         .tuner          = -1,
1569         .svhs           = 1,
1570         .muxsel         = { 0, 1 },
1571         .pll            = PLL_28,
1572         .tuner_type     = -1,
1573         .no_msp34xx     = 1,
1574         .no_tda9875     = 1,
1575         .no_tda7432     = 1,
1576 },{
1577         .name           = "Osprey 210/220",   /* 0x1(A|B)-04C0-C1 */
1578         .video_inputs   = 2,
1579         .audio_inputs   = 1,
1580         .tuner          = -1,
1581         .svhs           = 1,
1582         .muxsel         = { 2, 3 },
1583         .pll            = PLL_28,
1584         .tuner_type     = -1,
1585         .no_msp34xx     = 1,
1586         .no_tda9875     = 1,
1587         .no_tda7432     = 1,
1588 },{
1589         .name           = "Osprey 500",   /* 500 */
1590         .video_inputs   = 2,
1591         .audio_inputs   = 1,
1592         .tuner          = -1,
1593         .svhs           = 1,
1594         .muxsel         = { 2, 3 },
1595         .pll            = PLL_28,
1596         .tuner_type     = -1,
1597         .no_msp34xx     = 1,
1598         .no_tda9875     = 1,
1599         .no_tda7432     = 1,
1600 },{
1601        .name           = "Osprey 540",   /* 540 */
1602        .video_inputs   = 4,
1603        .audio_inputs   = 1,
1604        .tuner          = -1,
1605 #if 0 /* TODO ... */
1606        .svhs           = OSPREY540_SVID_ANALOG,
1607        .muxsel         = {       [OSPREY540_COMP_ANALOG] = 2,
1608                                [OSPREY540_SVID_ANALOG] = 3, },
1609 #endif
1610        .pll            = PLL_28,
1611        .tuner_type     = -1,
1612        .no_msp34xx     = 1,
1613        .no_tda9875     = 1,
1614        .no_tda7432     = 1,
1615 #if 0 /* TODO ... */
1616        .muxsel_hook    = osprey_540_muxsel,
1617        .picture_hook   = osprey_540_set_picture,
1618 #endif
1619 },{
1620
1621         /* ---- card 0x5C ---------------------------------- */
1622         .name           = "Osprey 2000",  /* 2000 */
1623         .video_inputs   = 2,
1624         .audio_inputs   = 1,
1625         .tuner          = -1,
1626         .svhs           = 1,
1627         .muxsel         = { 2, 3 },
1628         .pll            = PLL_28,
1629         .tuner_type     = -1,
1630         .no_msp34xx     = 1,
1631         .no_tda9875     = 1,
1632         .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1633 },{
1634         /* M G Berberich <berberic@forwiss.uni-passau.de> */
1635         .name           = "IDS Eagle",
1636         .video_inputs   = 4,
1637         .audio_inputs   = 0,
1638         .tuner          = -1,
1639         .tuner_type     = -1,
1640         .svhs           = -1,
1641         .gpiomask       = 0,
1642         .muxsel         = { 0, 1, 2, 3 },
1643         .muxsel_hook    = eagle_muxsel,
1644         .no_msp34xx     = 1,
1645         .no_tda9875     = 1,
1646         .pll            = PLL_28,
1647 },{
1648         .name           = "Pinnacle PCTV Sat",
1649         .video_inputs   = 2,
1650         .audio_inputs   = 0,
1651         .svhs           = 1,
1652         .tuner          = -1,
1653         .tuner_type     = -1,
1654         .no_msp34xx     = 1,
1655         .no_tda9875     = 1,
1656         .no_tda7432     = 1,
1657         .gpiomask       = 0x01,
1658         .audiomux       = { 0, 0, 0, 0, 1 },
1659         .muxsel         = { 3, 0, 1, 2},
1660         .needs_tvaudio  = 0,
1661         .pll            = PLL_28,
1662         .no_gpioirq     = 1,
1663         .has_dvb        = 1,
1664 },{
1665         .name           = "Formac ProTV II (bt878)",
1666         .video_inputs   = 4,
1667         .audio_inputs   = 1,
1668         .tuner          = 0,
1669         .svhs           = 3,
1670         .gpiomask       = 2,
1671         // TV, Comp1, Composite over SVID con, SVID
1672         .muxsel         = { 2, 3, 1, 1},
1673         .audiomux       = { 2, 2, 0, 0, 0 },
1674         .pll            = PLL_28,
1675         .has_radio      = 1,
1676         .tuner_type     = TUNER_PHILIPS_PAL,
1677       /* sound routing:
1678            GPIO=0x00,0x01,0x03: mute (?)
1679               0x02: both TV and radio (tuner: FM1216/I)
1680          The card has onboard audio connectors labeled "cdrom" and "board",
1681          not soldered here, though unknown wiring.
1682          Card lacks: external audio in, pci subsystem id.
1683        */
1684 },{
1685
1686         /* ---- card 0x60 ---------------------------------- */
1687         .name           = "MachTV",
1688         .video_inputs   = 3,
1689         .audio_inputs   = 1,
1690         .tuner          = 0,
1691         .svhs           = -1,
1692         .gpiomask       = 7,
1693         .muxsel         = { 2, 3, 1, 1},
1694         .audiomux       = { 0, 1, 2, 3, 4},
1695         .needs_tvaudio  = 1,
1696         .tuner_type     = 5,
1697         .pll            = 1,
1698 },{
1699         .name           = "Euresys Picolo",
1700         .video_inputs   = 3,
1701         .audio_inputs   = 0,
1702         .tuner          = -1,
1703         .svhs           = 2,
1704         .gpiomask       = 0,
1705         .no_msp34xx     = 1,
1706         .no_tda9875     = 1,
1707         .no_tda7432     = 1,
1708         .muxsel         = { 2, 0, 1},
1709         .pll            = PLL_28,
1710 },{
1711         /* Luc Van Hoeylandt <luc@e-magic.be> */
1712         .name           = "ProVideo PV150", /* 0x4f */
1713         .video_inputs   = 2,
1714         .audio_inputs   = 0,
1715         .tuner          = -1,
1716         .svhs           = -1,
1717         .gpiomask       = 0,
1718         .muxsel         = { 2, 3 },
1719         .audiomux       = { 0 },
1720         .needs_tvaudio  = 0,
1721         .no_msp34xx     = 1,
1722         .pll            = PLL_28,
1723         .tuner_type     = -1,
1724 },{
1725         /* Hiroshi Takekawa <sian@big.or.jp> */
1726         /* This card lacks subsystem ID */
1727         .name           = "AD-TVK503", /* 0x63 */
1728         .video_inputs   = 4,
1729         .audio_inputs   = 1,
1730         .tuner          = 0,
1731         .svhs           = 2,
1732         .gpiomask       = 0x001e8007,
1733         .muxsel         = { 2, 3, 1, 0 },
1734         /*                  Tuner, Radio, external, internal, off,  on */
1735         .audiomux       = { 0x08,  0x0f,  0x0a,     0x08,     0x0f, 0x08 },
1736         .needs_tvaudio  = 0,
1737         .no_msp34xx     = 1,
1738         .pll            = PLL_28,
1739         .tuner_type     = 2,
1740         .audio_hook     = adtvk503_audio,
1741 },{
1742
1743         /* ---- card 0x64 ---------------------------------- */
1744         .name           = "Hercules Smart TV Stereo",
1745         .video_inputs   = 4,
1746         .audio_inputs   = 1,
1747         .tuner          = 0,
1748         .svhs           = 2,
1749         .gpiomask       = 0x00,
1750         .muxsel         = { 2, 3, 1, 1 },
1751         .needs_tvaudio  = 1,
1752         .no_msp34xx     = 1,
1753         .pll            = PLL_28,
1754         .tuner_type     = 5,
1755         /* Notes:
1756            - card lacks subsystem ID
1757            - stereo variant w/ daughter board with tda9874a @0xb0
1758            - Audio Routing:
1759                 always from tda9874 independent of GPIO (?)
1760                 external line in: unknown
1761            - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1762                       hef4053 (instead 4052) for unknown function
1763         */
1764 },{
1765         .name           = "Pace TV & Radio Card",
1766         .video_inputs   = 4,
1767         .audio_inputs   = 1,
1768         .tuner          = 0,
1769         .svhs           = 2,
1770         .muxsel         = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
1771         .gpiomask       = 0,
1772         .no_tda9875     = 1,
1773         .no_tda7432     = 1,
1774         .tuner_type     = 1,
1775         .has_radio      = 1,
1776         .pll            = PLL_28,
1777         /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1778            only internal line out: (4pin header) RGGL
1779            Radio must be decoded by msp3410d (not routed through)*/
1780         //         .digital_mode   = DIGITAL_MODE_CAMERA, // todo!
1781 },{
1782         /* Chris Willing <chris@vislab.usyd.edu.au> */
1783         .name           = "IVC-200",
1784         .video_inputs   = 1,
1785         .audio_inputs   = 0,
1786         .tuner          = -1,
1787         .tuner_type     = -1,
1788         .svhs           = -1,
1789         .gpiomask       = 0xdf,
1790         .muxsel         = { 2 },
1791         .pll            = PLL_28,
1792 },{
1793         .name           = "Grand X-Guard / Trust 814PCI",
1794         .video_inputs   = 16,
1795         .audio_inputs   = 0,
1796         .tuner          = -1,
1797         .svhs           = -1,
1798         .tuner_type     = 4,
1799         .gpiomask2      = 0xff,
1800         .muxsel         = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
1801         .muxsel_hook    = xguard_muxsel,
1802         .no_msp34xx     = 1,
1803         .no_tda9875     = 1,
1804         .no_tda7432     = 1,
1805         .pll            = PLL_28,
1806 },{
1807
1808         /* ---- card 0x68 ---------------------------------- */
1809         .name           = "Nebula Electronics DigiTV",
1810         .video_inputs   = 1,
1811         .tuner          = -1,
1812         .svhs           = -1,
1813         .muxsel         = { 2, 3, 1, 0},
1814         .no_msp34xx     = 1,
1815         .no_tda9875     = 1,
1816         .no_tda7432     = 1,
1817         .pll            = PLL_28,
1818         .tuner_type     = -1,
1819         .has_dvb        = 1,
1820         .no_gpioirq     = 1,
1821 },{
1822         /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1823         .name           = "ProVideo PV143",
1824         .video_inputs   = 4,
1825         .audio_inputs   = 0,
1826         .tuner          = -1,
1827         .svhs           = -1,
1828         .gpiomask       = 0,
1829         .muxsel         = { 2, 3, 1, 0 },
1830         .audiomux       = { 0 },
1831         .needs_tvaudio  = 0,
1832         .no_msp34xx     = 1,
1833         .pll            = PLL_28,
1834         .tuner_type     = -1,
1835 },{
1836         /* M.Klahr@phytec.de */
1837         .name           = "PHYTEC VD-009-X1 MiniDIN (bt878)",
1838         .video_inputs   = 4,
1839         .audio_inputs   = 0,
1840         .tuner          = -1, /* card has no tuner */
1841         .svhs           = 3,
1842         .gpiomask       = 0x00,
1843         .muxsel         = { 2, 3, 1, 0},
1844         .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1845         .needs_tvaudio  = 1,
1846         .pll            = PLL_28,
1847         .tuner_type     = -1,
1848 },{
1849         .name           = "PHYTEC VD-009-X1 Combi (bt878)",
1850         .video_inputs   = 4,
1851         .audio_inputs   = 0,
1852         .tuner          = -1, /* card has no tuner */
1853         .svhs           = 3,
1854         .gpiomask       = 0x00,
1855         .muxsel         = { 2, 3, 1, 1},
1856         .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1857         .needs_tvaudio  = 1,
1858         .pll            = PLL_28,
1859         .tuner_type     = -1,
1860 },{
1861
1862         /* ---- card 0x6c ---------------------------------- */
1863         .name           = "PHYTEC VD-009 MiniDIN (bt878)",
1864         .video_inputs   = 10,
1865         .audio_inputs   = 0,
1866         .tuner          = -1, /* card has no tuner */
1867         .svhs           = 9,
1868         .gpiomask       = 0x00,
1869         .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
1870                                    via the upper nibble of muxsel. here: used for
1871                                    xternal video-mux */
1872         .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
1873         .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1874         .needs_tvaudio  = 1,
1875         .pll            = PLL_28,
1876         .tuner_type     = -1,
1877 },{
1878         .name           = "PHYTEC VD-009 Combi (bt878)",
1879         .video_inputs   = 10,
1880         .audio_inputs   = 0,
1881         .tuner          = -1, /* card has no tuner */
1882         .svhs           = 9,
1883         .gpiomask       = 0x00,
1884         .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
1885                                    via the upper nibble of muxsel. here: used for
1886                                    xternal video-mux */
1887         .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
1888         .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1889         .needs_tvaudio  = 1,
1890         .pll            = PLL_28,
1891         .tuner_type     = -1,
1892 },{
1893         .name           = "IVC-100",
1894         .video_inputs   = 4,
1895         .audio_inputs   = 0,
1896         .tuner          = -1,
1897         .tuner_type     = -1,
1898         .svhs           = -1,
1899         .gpiomask       = 0xdf,
1900         .muxsel         = { 2, 3, 1, 0 },
1901         .pll            = PLL_28,
1902 },{
1903         /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
1904         .name           = "IVC-120G",
1905         .video_inputs   = 16,
1906         .audio_inputs   = 0,    /* card has no audio */
1907         .tuner          = -1,   /* card has no tuner */
1908         .tuner_type     = -1,
1909         .svhs           = -1,   /* card has no svhs */
1910         .needs_tvaudio  = 0,
1911         .no_msp34xx     = 1,
1912         .no_tda9875     = 1,
1913         .no_tda7432     = 1,
1914         .gpiomask       = 0x00,
1915         .muxsel         = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
1916                             0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
1917         .muxsel_hook    = ivc120_muxsel,
1918         .pll            = PLL_28,
1919 },{
1920
1921         /* ---- card 0x70 ---------------------------------- */
1922         .name           = "pcHDTV HD-2000 TV",
1923         .video_inputs   = 4,
1924         .audio_inputs   = 1,
1925         .tuner          = 0,
1926         .svhs           = 2,
1927         .muxsel         = { 2, 3, 1, 0},
1928         .tuner_type     = TUNER_PHILIPS_ATSC,
1929         .has_dvb        = 1,
1930 },{
1931         .name           = "Twinhan DST + clones",
1932         .no_msp34xx     = 1,
1933         .no_tda9875     = 1,
1934         .no_tda7432     = 1,
1935         .tuner_type     = TUNER_ABSENT,
1936         .no_video       = 1,
1937         .has_dvb        = 1,
1938 },{
1939         .name           = "Winfast VC100",
1940         .video_inputs   = 3,
1941         .audio_inputs   = 0,
1942         .svhs           = 1,
1943         .tuner          = -1, // no tuner
1944         .muxsel         = { 3, 1, 1, 3}, // Vid In, SVid In, Vid over SVid in connector
1945         .no_msp34xx     = 1,
1946         .no_tda9875     = 1,
1947         .no_tda7432     = 1,
1948         .tuner_type     = TUNER_ABSENT,
1949         .no_video       = 1,
1950         .pll            = PLL_28,
1951 },{
1952         .name           = "Teppro TEV-560/InterVision IV-560",
1953         .video_inputs   = 3,
1954         .audio_inputs   = 1,
1955         .tuner          = 0,
1956         .svhs           = 2,
1957         .gpiomask       = 3,
1958         .muxsel         = { 2, 3, 1, 1},
1959         .audiomux       = { 1, 1, 1, 1, 0},
1960         .needs_tvaudio  = 1,
1961         .tuner_type     = TUNER_PHILIPS_PAL,
1962         .pll            = PLL_35,
1963 },{
1964
1965         /* ---- card 0x74 ---------------------------------- */
1966         .name           = "SIMUS GVC1100",
1967         .video_inputs   = 4,
1968         .audio_inputs   = 0,
1969         .tuner          = -1,
1970         .svhs           = -1,
1971         .tuner_type     = -1,
1972         .pll            = PLL_28,
1973         .muxsel         = { 2, 2, 2, 2},
1974         .gpiomask       = 0x3F,
1975         .muxsel_hook    = gvc1100_muxsel,
1976 },{
1977         /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
1978         .name           = "NGS NGSTV+",
1979         .video_inputs   = 3,
1980         .tuner          = 0,
1981         .svhs           = 2,
1982         .gpiomask       = 0x008007,
1983         .muxsel         = {2, 3, 0, 0},
1984         .audiomux       = {0, 0, 0, 0, 0x000003, 0},
1985         .pll            = PLL_28,
1986         .tuner_type     = TUNER_PHILIPS_PAL,
1987         .has_remote     = 1,
1988 },{
1989         /* http://linuxmedialabs.com */
1990         .name           = "LMLBT4",
1991         .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
1992         .audio_inputs   = 0,
1993         .tuner          = -1,
1994         .svhs           = -1,
1995         .muxsel         = { 2, 3, 1, 0 },
1996         .no_msp34xx     = 1,
1997         .no_tda9875     = 1,
1998         .no_tda7432     = 1,
1999         .needs_tvaudio  = 0,
2000 },{
2001         /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2002         .name           = "Tekram M205 PRO",
2003         .video_inputs   = 3,
2004         .audio_inputs   = 1,
2005         .tuner          = 0,
2006         .tuner_type     = TUNER_PHILIPS_PAL,
2007         .svhs           = 2,
2008         .needs_tvaudio  = 0,
2009         .gpiomask       = 0x68,
2010         .muxsel         = { 2, 3, 1},
2011         .audiomux       = { 0x68, 0x68, 0x61, 0x61, 0x00 },
2012         .pll            = PLL_28,
2013 },{
2014
2015         /* ---- card 0x78 ---------------------------------- */
2016         /* Javier Cendan Ares <jcendan@lycos.es> */
2017         /* bt878 TV + FM without subsystem ID */
2018         .name           = "Conceptronic CONTVFMi",
2019         .video_inputs   = 3,
2020         .audio_inputs   = 1,
2021         .tuner          = 0,
2022         .svhs           = 2,
2023         .gpiomask       = 0x008007,
2024         .muxsel         = { 2, 3, 1, 1 },
2025         .audiomux       = { 0, 1, 2, 2, 3 },
2026         .needs_tvaudio  = 0,
2027         .pll            = PLL_28,
2028         .tuner_type     = TUNER_PHILIPS_PAL,
2029         .has_remote     = 1,
2030         .has_radio      = 1,
2031 },{
2032         /*Eric DEBIEF <debief@telemsa.com>*/
2033         /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2034         /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_PICOLO_TETRA_CHIP*/
2035         /*0x79 in bttv.h*/
2036         .name           = "Euresys Picolo Tetra",
2037         .video_inputs   = 4,
2038         .audio_inputs   = 0,
2039         .tuner          = -1,
2040         .svhs           = -1,
2041         .gpiomask       = 0,
2042         .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2043         .no_msp34xx     = 1,
2044         .no_tda9875     = 1,
2045         .no_tda7432     = 1,
2046         .muxsel         = {2,2,2,2},/*878A input is always MUX0, see above.*/
2047         .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2048         .pll            = PLL_28,
2049         .needs_tvaudio  = 0,
2050         .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2051 },{
2052         /* Spirit TV Tuner from http://spiritmodems.com.au */
2053         /* Stafford Goodsell <surge@goliath.homeunix.org> */
2054         .name           = "Spirit TV Tuner",
2055         .video_inputs   = 3,
2056         .audio_inputs   = 1,
2057         .tuner          = 0,
2058         .svhs           = 2,
2059         .gpiomask       = 0x0000000f,
2060         .muxsel         = { 2, 1, 1 },
2061         .audiomux       = { 0x02, 0x00, 0x00, 0x00, 0x00},
2062         .tuner_type     = TUNER_TEMIC_PAL,
2063         .no_msp34xx     = 1,
2064         .no_tda9875     = 1,
2065 },{
2066         /* Wolfram Joost <wojo@frokaschwei.de> */
2067         .name           = "AVerMedia AVerTV DVB-T 771",
2068         .video_inputs   = 2,
2069         .svhs           = 1,
2070         .tuner          = -1,
2071         .tuner_type     = TUNER_ABSENT,
2072         .muxsel         = { 3 , 3 },
2073         .no_msp34xx     = 1,
2074         .no_tda9875     = 1,
2075         .no_tda7432     = 1,
2076         .pll            = PLL_28,
2077         .has_dvb        = 1,
2078         .no_gpioirq     = 1,
2079         .has_remote     = 1,
2080 },{
2081         /* ---- card 0x7c ---------------------------------- */
2082         /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2083         /* Based on the Nebula card data - added remote and new card number - BTTV_AVDVBT_761, see also ir-kbd-gpio.c */
2084         .name           = "AverMedia AverTV DVB-T 761",
2085         .video_inputs   = 2,
2086         .tuner          = -1,
2087         .svhs           = 1,
2088         .muxsel         = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
2089         .no_msp34xx     = 1,
2090         .no_tda9875     = 1,
2091         .no_tda7432     = 1,
2092         .pll            = PLL_28,
2093         .tuner_type     = -1,
2094         .has_dvb        = 1,
2095         .no_gpioirq     = 1,
2096         .has_remote     = 1,
2097 },{
2098         /* andre.schwarz@matrix-vision.de */
2099         .name             = "MATRIX Vision Sigma-SQ",
2100         .video_inputs     = 16,
2101         .audio_inputs     = 0,
2102         .tuner            = -1,
2103         .svhs             = -1,
2104         .gpiomask         = 0x0,
2105         .muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
2106                               3, 3, 3, 3, 3, 3, 3, 3 },
2107         .muxsel_hook      = sigmaSQ_muxsel,
2108         .audiomux         = { 0 },
2109         .no_msp34xx       = 1,
2110         .pll              = PLL_28,
2111         .tuner_type       = -1,
2112 },{
2113         /* andre.schwarz@matrix-vision.de */
2114         .name             = "MATRIX Vision Sigma-SLC",
2115         .video_inputs     = 4,
2116         .audio_inputs     = 0,
2117         .tuner            = -1,
2118         .svhs             = -1,
2119         .gpiomask         = 0x0,
2120         .muxsel           = { 2, 2, 2, 2 },
2121         .muxsel_hook      = sigmaSLC_muxsel,
2122         .audiomux         = { 0 },
2123         .no_msp34xx       = 1,
2124         .pll              = PLL_28,
2125         .tuner_type       = -1,
2126 },{
2127         /* BTTV_APAC_VIEWCOMP */
2128         /* Attila Kondoros <attila.kondoros@chello.hu> */
2129         /* bt878 TV + FM 0x00000000 subsystem ID */
2130         .name           = "APAC Viewcomp 878(AMAX)",
2131         .video_inputs   = 2,
2132         .audio_inputs   = 1,
2133         .tuner          = 0,
2134         .svhs           = -1,
2135         .gpiomask       = 0xFF,
2136         .muxsel         = { 2, 3, 1, 1},
2137         .audiomux       = { 2, 0, 0, 0, 10},
2138         .needs_tvaudio  = 0,
2139         .pll            = PLL_28,
2140         .tuner_type     = TUNER_PHILIPS_PAL,
2141         .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2142         .has_radio      = 1,   /* not every card has radio */
2143 },{
2144
2145         /* ---- card 0x80 ---------------------------------- */
2146         /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2147         .name           = "DVICO FusionHDTV DVB-T Lite",
2148         .tuner          = -1,
2149         .no_msp34xx     = 1,
2150         .no_tda9875     = 1,
2151         .no_tda7432     = 1,
2152         .pll            = PLL_28,
2153         .no_video       = 1,
2154         .has_dvb        = 1,
2155         .tuner_type     = -1,
2156 },{
2157         /* Steven <photon38@pchome.com.tw> */
2158         .name           = "V-Gear MyVCD",
2159         .video_inputs   = 3,
2160         .audio_inputs   = 1,
2161         .tuner          = 0,
2162         .svhs           = 2,
2163         .gpiomask       = 0x3f,
2164         .muxsel         = {2, 3, 1, 0},
2165         .audiomux       = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
2166         .no_msp34xx     = 1,
2167         .pll            = PLL_28,
2168         .tuner_type     = TUNER_PHILIPS_NTSC_M,
2169         .has_radio      = 0,
2170         // .has_remote     = 1,
2171 },{
2172         /* Rick C <cryptdragoon@gmail.com> */
2173         .name           = "Super TV Tuner",
2174         .video_inputs   = 4,
2175         .audio_inputs   = 1,
2176         .tuner          = 0,
2177         .svhs           = 2,
2178         .muxsel         = { 2, 3, 1, 0},
2179         .tuner_type     = TUNER_PHILIPS_NTSC,
2180         .gpiomask       = 0x008007,
2181         .audiomux       = { 0, 0x000001,0,0, 0},
2182         .needs_tvaudio  = 1,
2183         .has_radio      = 1,
2184 },{
2185                 /* Chris Fanning <video4linux@haydon.net> */
2186                 .name           = "Tibet Systems 'Progress DVR' CS16",
2187                 .video_inputs   = 16,
2188                 .audio_inputs   = 0,
2189                 .tuner          = -1,
2190                 .svhs           = -1,
2191                 .muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2192                 .pll            = PLL_28,
2193                 .no_msp34xx     = 1,
2194                 .no_tda9875     = 1,
2195                 .no_tda7432     = 1,
2196                 .tuner_type     = -1,
2197                 .muxsel_hook    = tibetCS16_muxsel,
2198 },
2199 {
2200         /* Bill Brack <wbrack@mmm.com.hk> */
2201         /*
2202          * Note that, because of the card's wiring, the "master"
2203          * BT878A chip (i.e. the one which controls the analog switch
2204          * and must use this card type) is the 2nd one detected.  The
2205          * other 3 chips should use card type 0x85, whose description
2206          * follows this one.  There is a EEPROM on the card (which is
2207          * connected to the I2C of one of those other chips), but is
2208          * not currently handled.  There is also a facility for a
2209          * "monitor", which is also not currently implemented.
2210          */
2211         .name           = "Kodicom 4400R (master)",
2212         .video_inputs   = 16,
2213         .audio_inputs   = 0,
2214         .tuner          = -1,
2215         .tuner_type     = -1,
2216         .svhs           = -1,
2217         /* GPIO bits 0-9 used for analog switch:
2218          *   00 - 03:   camera selector
2219          *   04 - 06:   channel (controller) selector
2220          *   07:        data (1->on, 0->off)
2221          *   08:        strobe
2222          *   09:        reset
2223          * bit 16 is input from sync separator for the channel
2224          */
2225         .gpiomask       = 0x0003ff,
2226         .no_gpioirq     = 1,
2227         .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2228         .pll            = PLL_28,
2229         .no_msp34xx     = 1,
2230         .no_tda7432     = 1,
2231         .no_tda9875     = 1,
2232         .muxsel_hook    = kodicom4400r_muxsel,
2233 },
2234 {
2235         /* Bill Brack <wbrack@mmm.com.hk> */
2236         /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2237          * one which controls the analog switch, and must use the card type)
2238          * is the 2nd one detected.  The other 3 chips should use this card
2239          * type
2240          */
2241         .name           = "Kodicom 4400R (slave)",
2242         .video_inputs   = 16,
2243         .audio_inputs   = 0,
2244         .tuner          = -1,
2245         .tuner_type     = -1,
2246         .svhs           = -1,
2247         .gpiomask       = 0x010000,
2248         .no_gpioirq     = 1,
2249         .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2250         .pll            = PLL_28,
2251         .no_msp34xx     = 1,
2252         .no_tda7432     = 1,
2253         .no_tda9875     = 1,
2254         .muxsel_hook    = kodicom4400r_muxsel,
2255 }};
2256
2257 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2258
2259 /* ----------------------------------------------------------------------- */
2260
2261 static unsigned char eeprom_data[256];
2262
2263 /*
2264  * identify card
2265  */
2266 void __devinit bttv_idcard(struct bttv *btv)
2267 {
2268         unsigned int gpiobits;
2269         int i,type;
2270         unsigned short tmp;
2271
2272         /* read PCI subsystem ID */
2273         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2274         btv->cardid = tmp << 16;
2275         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2276         btv->cardid |= tmp;
2277
2278         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2279                 /* look for the card */
2280                 for (type = -1, i = 0; cards[i].id != 0; i++)
2281                         if (cards[i].id  == btv->cardid)
2282                                 type = i;
2283
2284                 if (type != -1) {
2285                         /* found it */
2286                         printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2287                                "PCI subsystem ID is %04x:%04x\n",
2288                                btv->c.nr,cards[type].name,cards[type].cardnr,
2289                                btv->cardid & 0xffff,
2290                                (btv->cardid >> 16) & 0xffff);
2291                         btv->c.type = cards[type].cardnr;
2292                 } else {
2293                         /* 404 */
2294                         printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2295                                btv->c.nr, btv->cardid & 0xffff,
2296                                (btv->cardid >> 16) & 0xffff);
2297                         printk(KERN_DEBUG "please mail id, board name and "
2298                                "the correct card= insmod option to kraxel@bytesex.org\n");
2299                 }
2300         }
2301
2302         /* let the user override the autodetected type */
2303         if (card[btv->c.nr] < bttv_num_tvcards)
2304                 btv->c.type=card[btv->c.nr];
2305
2306         /* print which card config we are using */
2307         printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2308                bttv_tvcards[btv->c.type].name, btv->c.type,
2309                card[btv->c.nr] < bttv_num_tvcards
2310                ? "insmod option" : "autodetected");
2311
2312         /* overwrite gpio stuff ?? */
2313         if (UNSET == audioall && UNSET == audiomux[0])
2314                 return;
2315
2316         if (UNSET != audiomux[0]) {
2317                 gpiobits = 0;
2318                 for (i = 0; i < 5; i++) {
2319                         bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
2320                         gpiobits |= audiomux[i];
2321                 }
2322         } else {
2323                 gpiobits = audioall;
2324                 for (i = 0; i < 5; i++) {
2325                         bttv_tvcards[btv->c.type].audiomux[i] = audioall;
2326                 }
2327         }
2328         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2329         printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2330                btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2331         for (i = 0; i < 5; i++) {
2332                 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
2333         }
2334         printk("\n");
2335 }
2336
2337 /*
2338  * (most) board specific initialisations goes here
2339  */
2340
2341 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2342 void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2343 {
2344         int type = -1;
2345
2346         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2347                 type = BTTV_MODTEC_205;
2348         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2349                 type = BTTV_EURESYS_PICOLO;
2350         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2351                 type = BTTV_HAUPPAUGE; /* old bt848 */
2352
2353         if (-1 != type) {
2354                 btv->c.type = type;
2355                 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2356                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2357         }
2358 }
2359
2360 static void flyvideo_gpio(struct bttv *btv)
2361 {
2362         int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
2363         int tuner=-1,ttype;
2364
2365         gpio_inout(0xffffff, 0);
2366         udelay(8);  // without this we would see the 0x1800 mask
2367         gpio = gpio_read();
2368         /* FIXME: must restore OUR_EN ??? */
2369
2370         // all cards provide GPIO info, some have an additional eeprom
2371         // LR50: GPIO coding can be found lower right CP1 .. CP9
2372         //       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2373         //       GPIO14-12: n.c.
2374         // LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2375
2376         // lowest 3 bytes are remote control codes (no handshake needed)
2377         // xxxFFF: No remote control chip soldered
2378         // xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2379         // Note: Some bits are Audio_Mask !
2380
2381         ttype=(gpio&0x0f0000)>>16;
2382         switch(ttype) {
2383         case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
2384                 break;
2385         case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
2386                 break;
2387         case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
2388                 break;
2389         case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
2390                 break;
2391         case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
2392                 break;
2393         default:
2394                 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
2395         }
2396
2397         has_remote          =   gpio & 0x800000;
2398         has_radio           =   gpio & 0x400000;
2399         //   unknown                   0x200000;
2400         //   unknown2                  0x100000;
2401         is_capture_only     = !(gpio & 0x008000); //GPIO15
2402         has_tda9820_tda9821 = !(gpio & 0x004000);
2403         is_lr90             = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
2404         //                      gpio & 0x001000 // output bit for audio routing
2405
2406         if(is_capture_only)
2407                 tuner=4; // No tuner present
2408
2409         printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2410                btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
2411         printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2412                 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
2413                 is_capture_only?"yes":"no ");
2414
2415         if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
2416                 btv->tuner_type = tuner;
2417         btv->has_radio = has_radio;
2418
2419         // LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2420         // LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2421         // Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
2422         if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
2423         //todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
2424 }
2425
2426 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
2427                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
2428 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
2429                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
2430
2431 static void miro_pinnacle_gpio(struct bttv *btv)
2432 {
2433         int id,msp,gpio;
2434         char *info;
2435
2436         gpio_inout(0xffffff, 0);
2437         gpio = gpio_read();
2438         id   = ((gpio>>10) & 63) -1;
2439         msp  = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
2440         if (id < 32) {
2441                 btv->tuner_type = miro_tunermap[id];
2442                 if (0 == (gpio & 0x20)) {
2443                         btv->has_radio = 1;
2444                         if (!miro_fmtuner[id]) {
2445                                 btv->has_matchbox = 1;
2446                                 btv->mbox_we    = (1<<6);
2447                                 btv->mbox_most  = (1<<7);
2448                                 btv->mbox_clk   = (1<<8);
2449                                 btv->mbox_data  = (1<<9);
2450                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
2451                         }
2452                 } else {
2453                         btv->has_radio = 0;
2454                 }
2455                 if (-1 != msp) {
2456                         if (btv->c.type == BTTV_MIRO)
2457                                 btv->c.type = BTTV_MIROPRO;
2458                         if (btv->c.type == BTTV_PINNACLE)
2459                                 btv->c.type = BTTV_PINNACLEPRO;
2460                 }
2461                 printk(KERN_INFO
2462                        "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
2463                        btv->c.nr, id+1, btv->tuner_type,
2464                        !btv->has_radio ? "no" :
2465                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
2466                        (-1 == msp) ? "no" : "yes");
2467         } else {
2468                 /* new cards with microtune tuner */
2469                 id = 63 - id;
2470                 btv->has_radio = 0;
2471                 switch (id) {
2472                 case 1:
2473                         info = "PAL / mono";
2474                         break;
2475                 case 2:
2476                         info = "PAL+SECAM / stereo";
2477                         btv->has_radio = 1;
2478                         break;
2479                 case 3:
2480                         info = "NTSC / stereo";
2481                         btv->has_radio = 1;
2482                         break;
2483                 case 4:
2484                         info = "PAL+SECAM / mono";
2485                         break;
2486                 case 5:
2487                         info = "NTSC / mono";
2488                         break;
2489                 case 6:
2490                         info = "NTSC / stereo";
2491                         break;
2492                 case 7:
2493                         info = "PAL / stereo";
2494                         break;
2495                 default:
2496                         info = "oops: unknown card";
2497                         break;
2498                 }
2499                 if (-1 != msp)
2500                         btv->c.type = BTTV_PINNACLEPRO;
2501                 printk(KERN_INFO
2502                        "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
2503                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
2504                 btv->tuner_type  = 33;
2505                 btv->pinnacle_id = id;
2506         }
2507 }
2508
2509 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
2510 #define LM1882_SYNC_DRIVE     0x200000L
2511
2512 static void init_ids_eagle(struct bttv *btv)
2513 {
2514         gpio_inout(0xffffff,0xFFFF37);
2515         gpio_write(0x200020);
2516
2517         /* flash strobe inverter ?! */
2518         gpio_write(0x200024);
2519
2520         /* switch sync drive off */
2521         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2522
2523         /* set BT848 muxel to 2 */
2524         btaor((2)<<5, ~(2<<5), BT848_IFORM);
2525 }
2526
2527 /* Muxsel helper for the IDS Eagle.
2528  * the eagles does not use the standard muxsel-bits but
2529  * has its own multiplexer */
2530 static void eagle_muxsel(struct bttv *btv, unsigned int input)
2531 {
2532         btaor((2)<<5, ~(3<<5), BT848_IFORM);
2533         gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
2534
2535 #if 0
2536        /* svhs */
2537        /* wake chroma ADC */
2538        btand(~BT848_ADC_C_SLEEP, BT848_ADC);
2539        /* set to YC video */
2540        btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
2541        btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
2542 #else
2543        /* composite */
2544        /* set chroma ADC to sleep */
2545        btor(BT848_ADC_C_SLEEP, BT848_ADC);
2546        /* set to composite video */
2547        btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
2548        btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
2549 #endif
2550
2551        /* switch sync drive off */
2552        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2553 }
2554
2555 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
2556 {
2557         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
2558         gpio_write(masks[input%4]);
2559 }
2560
2561 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
2562    alarms output
2563
2564    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
2565    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
2566
2567    IN - sensor inputs, INx - sensor inputs and TI XORed together
2568    O1,O2,O3 - alarm outputs (relays)
2569
2570    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
2571
2572 */
2573
2574 static void init_lmlbt4x(struct bttv *btv)
2575 {
2576         printk(KERN_DEBUG "LMLBT4x init\n");
2577         btwrite(0x000000, BT848_GPIO_REG_INP);
2578         gpio_inout(0xffffff, 0x0006C0);
2579         gpio_write(0x000000);
2580 }
2581
2582 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
2583 {
2584         unsigned int inmux = input % 8;
2585         gpio_inout( 0xf, 0xf );
2586         gpio_bits( 0xf, inmux );
2587 }
2588
2589 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
2590 {
2591         unsigned int inmux = input % 4;
2592         gpio_inout( 3<<9, 3<<9 );
2593         gpio_bits( 3<<9, inmux<<9 );
2594 }
2595
2596 /* ----------------------------------------------------------------------- */
2597
2598 static void bttv_reset_audio(struct bttv *btv)
2599 {
2600         /*
2601          * BT878A has a audio-reset register.
2602          * 1. This register is an audio reset function but it is in
2603          *    function-0 (video capture) address space.
2604          * 2. It is enough to do this once per power-up of the card.
2605          * 3. There is a typo in the Conexant doc -- it is not at
2606          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
2607          * --//Shrikumar 030609
2608          */
2609         if (btv->id != 878)
2610                 return;
2611
2612         if (bttv_debug)
2613                 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
2614         btwrite((1<<7), 0x058);
2615         udelay(10);
2616         btwrite(     0, 0x058);
2617 }
2618
2619 /* initialization part one -- before registering i2c bus */
2620 void __devinit bttv_init_card1(struct bttv *btv)
2621 {
2622         switch (btv->c.type) {
2623         case BTTV_HAUPPAUGE:
2624         case BTTV_HAUPPAUGE878:
2625                 boot_msp34xx(btv,5);
2626                 break;
2627         case BTTV_VOODOOTV_FM:
2628                 boot_msp34xx(btv,20);
2629                 break;
2630         case BTTV_AVERMEDIA98:
2631                 boot_msp34xx(btv,11);
2632                 break;
2633         case BTTV_HAUPPAUGEPVR:
2634                 pvr_boot(btv);
2635                 break;
2636         case BTTV_TWINHAN_DST:
2637         case BTTV_AVDVBT_771:
2638                 btv->use_i2c_hw = 1;
2639                 break;
2640         }
2641         if (!bttv_tvcards[btv->c.type].has_dvb)
2642                 bttv_reset_audio(btv);
2643 }
2644
2645 /* initialization part two -- after registering i2c bus */
2646 void __devinit bttv_init_card2(struct bttv *btv)
2647 {
2648         int tda9887;
2649         btv->tuner_type = -1;
2650
2651         if (BTTV_UNKNOWN == btv->c.type) {
2652                 bttv_readee(btv,eeprom_data,0xa0);
2653                 identify_by_eeprom(btv,eeprom_data);
2654         }
2655
2656         switch (btv->c.type) {
2657         case BTTV_MIRO:
2658         case BTTV_MIROPRO:
2659         case BTTV_PINNACLE:
2660         case BTTV_PINNACLEPRO:
2661                 /* miro/pinnacle */
2662                 miro_pinnacle_gpio(btv);
2663                 break;
2664         case BTTV_FLYVIDEO_98:
2665         case BTTV_MAXI:
2666         case BTTV_LIFE_FLYKIT:
2667         case BTTV_FLYVIDEO:
2668         case BTTV_TYPHOON_TVIEW:
2669         case BTTV_CHRONOS_VS2:
2670         case BTTV_FLYVIDEO_98FM:
2671         case BTTV_FLYVIDEO2000:
2672         case BTTV_FLYVIDEO98EZ:
2673         case BTTV_CONFERENCETV:
2674         case BTTV_LIFETEC_9415:
2675                 flyvideo_gpio(btv);
2676                 break;
2677         case BTTV_HAUPPAUGE:
2678         case BTTV_HAUPPAUGE878:
2679         case BTTV_HAUPPAUGEPVR:
2680                 /* pick up some config infos from the eeprom */
2681                 bttv_readee(btv,eeprom_data,0xa0);
2682                 hauppauge_eeprom(btv);
2683                 break;
2684         case BTTV_AVERMEDIA98:
2685         case BTTV_AVPHONE98:
2686                 bttv_readee(btv,eeprom_data,0xa0);
2687                 avermedia_eeprom(btv);
2688                 break;
2689         case BTTV_PXC200:
2690                 init_PXC200(btv);
2691                 break;
2692         case BTTV_PICOLO_TETRA_CHIP:
2693                 picolo_tetra_init(btv);
2694                 break;
2695         case BTTV_VHX:
2696                 btv->has_radio    = 1;
2697                 btv->has_matchbox = 1;
2698                 btv->mbox_we      = 0x20;
2699                 btv->mbox_most    = 0;
2700                 btv->mbox_clk     = 0x08;
2701                 btv->mbox_data    = 0x10;
2702                 btv->mbox_mask    = 0x38;
2703                 break;
2704         case BTTV_VOBIS_BOOSTAR:
2705         case BTTV_TERRATV:
2706                 terratec_active_radio_upgrade(btv);
2707                 break;
2708         case BTTV_MAGICTVIEW061:
2709                 if (btv->cardid == 0x3002144f) {
2710                         btv->has_radio=1;
2711                         printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
2712                 }
2713                 break;
2714        case BTTV_STB2:
2715                 if (btv->cardid == 0x3060121a) {
2716                         /* Fix up entry for 3DFX VoodooTV 100,
2717                            which is an OEM STB card variant. */
2718                         btv->has_radio=0;
2719                         btv->tuner_type=TUNER_TEMIC_NTSC;
2720                 }
2721                 break;
2722         case BTTV_OSPREY1x0:
2723         case BTTV_OSPREY1x0_848:
2724         case BTTV_OSPREY101_848:
2725         case BTTV_OSPREY1x1:
2726         case BTTV_OSPREY1x1_SVID:
2727         case BTTV_OSPREY2xx:
2728         case BTTV_OSPREY2x0_SVID:
2729         case BTTV_OSPREY2x0:
2730         case BTTV_OSPREY500:
2731         case BTTV_OSPREY540:
2732         case BTTV_OSPREY2000:
2733                 bttv_readee(btv,eeprom_data,0xa0);
2734                 osprey_eeprom(btv);
2735                 break;
2736         case BTTV_IDS_EAGLE:
2737                 init_ids_eagle(btv);
2738                 break;
2739         case BTTV_MODTEC_205:
2740                 bttv_readee(btv,eeprom_data,0xa0);
2741                 modtec_eeprom(btv);
2742                 break;
2743         case BTTV_LMLBT4:
2744                 init_lmlbt4x(btv);
2745                 break;
2746         case BTTV_TIBET_CS16:
2747                 tibetCS16_init(btv);
2748                 break;
2749         case BTTV_KODICOM_4400R:
2750                 kodicom4400r_init(btv);
2751                 break;
2752         }
2753
2754         /* pll configuration */
2755         if (!(btv->id==848 && btv->revision==0x11)) {
2756                 /* defaults from card list */
2757                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
2758                         btv->pll.pll_ifreq=28636363;
2759                         btv->pll.pll_crystal=BT848_IFORM_XT0;
2760                 }
2761                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
2762                         btv->pll.pll_ifreq=35468950;
2763                         btv->pll.pll_crystal=BT848_IFORM_XT1;
2764                 }
2765                 /* insmod options can override */
2766                 switch (pll[btv->c.nr]) {
2767                 case 0: /* none */
2768                         btv->pll.pll_crystal = 0;
2769                         btv->pll.pll_ifreq   = 0;
2770                         btv->pll.pll_ofreq   = 0;
2771                         break;
2772                 case 1: /* 28 MHz */
2773                 case 28:
2774                         btv->pll.pll_ifreq   = 28636363;
2775                         btv->pll.pll_ofreq   = 0;
2776                         btv->pll.pll_crystal = BT848_IFORM_XT0;
2777                         break;
2778                 case 2: /* 35 MHz */
2779                 case 35:
2780                         btv->pll.pll_ifreq   = 35468950;
2781                         btv->pll.pll_ofreq   = 0;
2782                         btv->pll.pll_crystal = BT848_IFORM_XT1;
2783                         break;
2784                 }
2785         }
2786         btv->pll.pll_current = -1;
2787
2788         /* tuner configuration (from card list / autodetect / insmod option) */
2789         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
2790                 if(UNSET == btv->tuner_type)
2791                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
2792         if (UNSET != tuner[btv->c.nr])
2793                 btv->tuner_type = tuner[btv->c.nr];
2794         printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
2795         if (btv->pinnacle_id != UNSET)
2796                 bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
2797                                       &btv->pinnacle_id);
2798         if (btv->tuner_type != UNSET)
2799                 bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
2800         btv->svhs = bttv_tvcards[btv->c.type].svhs;
2801         if (svhs[btv->c.nr] != UNSET)
2802                 btv->svhs = svhs[btv->c.nr];
2803         if (remote[btv->c.nr] != UNSET)
2804                 btv->has_remote = remote[btv->c.nr];
2805
2806         if (bttv_tvcards[btv->c.type].has_radio)
2807                 btv->has_radio=1;
2808         if (bttv_tvcards[btv->c.type].has_remote)
2809                 btv->has_remote=1;
2810         if (bttv_tvcards[btv->c.type].no_gpioirq)
2811                 btv->gpioirq=0;
2812         if (bttv_tvcards[btv->c.type].audio_hook)
2813                 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
2814
2815         if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
2816                 /* detect Bt832 chip for quartzsight digital camera */
2817                 if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
2818                     (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
2819                         boot_bt832(btv);
2820         }
2821
2822         if (!autoload)
2823                 return;
2824
2825         /* try to detect audio/fader chips */
2826         if (!bttv_tvcards[btv->c.type].no_msp34xx &&
2827             bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
2828                 request_module("msp3400");
2829
2830         if (bttv_tvcards[btv->c.type].msp34xx_alt &&
2831             bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
2832                 request_module("msp3400");
2833
2834         if (!bttv_tvcards[btv->c.type].no_tda9875 &&
2835             bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
2836                 request_module("tda9875");
2837
2838         if (!bttv_tvcards[btv->c.type].no_tda7432 &&
2839             bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
2840                 request_module("tda7432");
2841
2842         if (bttv_tvcards[btv->c.type].needs_tvaudio)
2843                 request_module("tvaudio");
2844
2845         /* tuner modules */
2846         tda9887 = 0;
2847         if (btv->pinnacle_id != UNSET)
2848                 tda9887 = 1;
2849         if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
2850             bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
2851                 tda9887 = 1;
2852         if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
2853            (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
2854            (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
2855             tda9887)
2856                 request_module("tda9887");
2857         if (btv->tuner_type != UNSET)
2858                 request_module("tuner");
2859 }
2860
2861
2862 /* ----------------------------------------------------------------------- */
2863
2864 static void modtec_eeprom(struct bttv *btv)
2865 {
2866         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
2867                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
2868                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2869                        btv->c.nr,&eeprom_data[0x1e]);
2870         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
2871                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
2872                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2873                        btv->c.nr,&eeprom_data[0x1e]);
2874         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
2875                 btv->tuner_type=TUNER_PHILIPS_NTSC;
2876                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2877                        btv->c.nr,&eeprom_data[0x1e]);
2878         } else {
2879                 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
2880                        btv->c.nr,&eeprom_data[0x1e]);
2881         }
2882 }
2883
2884 static void __devinit hauppauge_eeprom(struct bttv *btv)
2885 {
2886         struct tveeprom tv;
2887
2888         tveeprom_hauppauge_analog(&tv, eeprom_data);
2889         btv->tuner_type = tv.tuner_type;
2890         btv->has_radio  = tv.has_radio;
2891 }
2892
2893 static int terratec_active_radio_upgrade(struct bttv *btv)
2894 {
2895         int freq;
2896
2897         btv->has_radio    = 1;
2898         btv->has_matchbox = 1;
2899         btv->mbox_we      = 0x10;
2900         btv->mbox_most    = 0x20;
2901         btv->mbox_clk     = 0x08;
2902         btv->mbox_data    = 0x04;
2903         btv->mbox_mask    = 0x3c;
2904
2905         btv->mbox_iow     = 1 <<  8;
2906         btv->mbox_ior     = 1 <<  9;
2907         btv->mbox_csel    = 1 << 10;
2908
2909         freq=88000/62.5;
2910         tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
2911         if (0x1ed8 == tea5757_read(btv)) {
2912                 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
2913                        btv->c.nr);
2914                 btv->has_radio    = 1;
2915                 btv->has_matchbox = 1;
2916         } else {
2917                 btv->has_radio    = 0;
2918                 btv->has_matchbox = 0;
2919         }
2920         return 0;
2921 }
2922
2923
2924 /* ----------------------------------------------------------------------- */
2925
2926 /*
2927  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
2928  *
2929  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
2930  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
2931  * unpacked with unzip).
2932  */
2933 #define PVR_GPIO_DELAY          10
2934
2935 #define BTTV_ALT_DATA           0x000001
2936 #define BTTV_ALT_DCLK           0x100000
2937 #define BTTV_ALT_NCONFIG        0x800000
2938
2939 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
2940 {
2941         u32 n;
2942         u8 bits;
2943         int i;
2944
2945         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
2946         gpio_write(0);
2947         udelay(PVR_GPIO_DELAY);
2948
2949         gpio_write(BTTV_ALT_NCONFIG);
2950         udelay(PVR_GPIO_DELAY);
2951
2952         for (n = 0; n < microlen; n++) {
2953                 bits = micro[n];
2954                 for ( i = 0 ; i < 8 ; i++ ) {
2955                         gpio_bits(BTTV_ALT_DCLK,0);
2956                         if (bits & 0x01)
2957                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
2958                         else
2959                                 gpio_bits(BTTV_ALT_DATA,0);
2960                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
2961                         bits >>= 1;
2962                 }
2963         }
2964         gpio_bits(BTTV_ALT_DCLK,0);
2965         udelay(PVR_GPIO_DELAY);
2966
2967         /* begin Altera init loop (Not necessary,but doesn't hurt) */
2968         for (i = 0 ; i < 30 ; i++) {
2969                 gpio_bits(BTTV_ALT_DCLK,0);
2970                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
2971         }
2972         gpio_bits(BTTV_ALT_DCLK,0);
2973         return 0;
2974 }
2975
2976 static int __devinit pvr_boot(struct bttv *btv)
2977 {
2978         const struct firmware *fw_entry;
2979         int rc;
2980
2981         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
2982         if (rc != 0) {
2983                 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
2984                        btv->c.nr);
2985                 return rc;
2986         }
2987         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
2988         printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
2989                btv->c.nr, (rc < 0) ? "failed" : "ok");
2990         release_firmware(fw_entry);
2991         return rc;
2992 }
2993
2994 /* ----------------------------------------------------------------------- */
2995 /* some osprey specific stuff                                              */
2996
2997 static void __devinit osprey_eeprom(struct bttv *btv)
2998 {
2999        int i = 0;
3000        unsigned char *ee = eeprom_data;
3001        unsigned long serial = 0;
3002
3003        if (btv->c.type == 0) {
3004                /* this might be an antique... check for MMAC label in eeprom */
3005                if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3006                        unsigned char checksum = 0;
3007                        for (i =0; i<21; i++)
3008                                checksum += ee[i];
3009                        if (checksum != ee[21])
3010                                return;
3011                        btv->c.type = BTTV_OSPREY1x0_848;
3012                        for (i = 12; i < 21; i++)
3013                                serial *= 10, serial += ee[i] - '0';
3014                }
3015        } else {
3016                unsigned short type;
3017                int offset = 4*16;
3018
3019                for(; offset < 8*16; offset += 16) {
3020                        unsigned short checksum = 0;
3021                        /* verify the checksum */
3022                        for(i = 0; i<14; i++) checksum += ee[i+offset];
3023                                checksum = ~checksum;  /* no idea why */
3024                                if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3025                                    ((checksum & 0x0FF) == ee[offset+15])) {
3026                                break;
3027                        }
3028                }
3029
3030                if (offset >= 8*16)
3031                        return;
3032
3033                /* found a valid descriptor */
3034                type = (ee[offset+4]<<8) | (ee[offset+5]);
3035
3036                switch(type) {
3037
3038                /* 848 based */
3039                case 0x0004:
3040                        btv->c.type = BTTV_OSPREY1x0_848;
3041                        break;
3042                case 0x0005:
3043                        btv->c.type = BTTV_OSPREY101_848;
3044                        break;
3045
3046                /* 878 based */
3047                case 0x0012:
3048                case 0x0013:
3049                        btv->c.type = BTTV_OSPREY1x0;
3050                        break;
3051                case 0x0014:
3052                case 0x0015:
3053                        btv->c.type = BTTV_OSPREY1x1;
3054                        break;
3055                case 0x0016:
3056                case 0x0017:
3057                case 0x0020:
3058                        btv->c.type = BTTV_OSPREY1x1_SVID;
3059                        break;
3060                case 0x0018:
3061                case 0x0019:
3062                case 0x001E:
3063                case 0x001F:
3064                        btv->c.