]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - drivers/acpi/sleep/main.c
19f8557c711cdf5f6b980dc7122423df526ad704
[linux-2.6.git] / drivers / acpi / sleep / main.c
1 /*
2  * sleep.c - ACPI sleep support.
3  *
4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
6  * Copyright (c) 2000-2003 Patrick Mochel
7  * Copyright (c) 2003 Open Source Development Lab
8  *
9  * This file is released under the GPLv2.
10  *
11  */
12
13 #include <linux/delay.h>
14 #include <linux/irq.h>
15 #include <linux/dmi.h>
16 #include <linux/device.h>
17 #include <linux/suspend.h>
18 #include <acpi/acpi_bus.h>
19 #include <acpi/acpi_drivers.h>
20 #include "sleep.h"
21
22 u8 sleep_states[ACPI_S_STATE_COUNT];
23
24 static struct pm_ops acpi_pm_ops;
25
26 extern void do_suspend_lowlevel(void);
27
28 static u32 acpi_suspend_states[] = {
29         [PM_SUSPEND_ON] = ACPI_STATE_S0,
30         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
31         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
32         [PM_SUSPEND_MAX] = ACPI_STATE_S5
33 };
34
35 static int init_8259A_after_S1;
36
37 extern int acpi_sleep_prepare(u32 acpi_state);
38 extern void acpi_power_off(void);
39
40 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
41
42 /**
43  *      acpi_pm_set_target - Set the target system sleep state to the state
44  *              associated with given @pm_state, if supported.
45  */
46
47 static int acpi_pm_set_target(suspend_state_t pm_state)
48 {
49         u32 acpi_state = acpi_suspend_states[pm_state];
50         int error = 0;
51
52         if (sleep_states[acpi_state]) {
53                 acpi_target_sleep_state = acpi_state;
54         } else {
55                 printk(KERN_ERR "ACPI does not support this state: %d\n",
56                         pm_state);
57                 error = -ENOSYS;
58         }
59         return error;
60 }
61
62 /**
63  *      acpi_pm_prepare - Do preliminary suspend work.
64  *      @pm_state: ignored
65  *
66  *      If necessary, set the firmware waking vector and do arch-specific
67  *      nastiness to get the wakeup code to the waking vector.
68  */
69
70 static int acpi_pm_prepare(suspend_state_t pm_state)
71 {
72         int error = acpi_sleep_prepare(acpi_target_sleep_state);
73
74         if (error)
75                 acpi_target_sleep_state = ACPI_STATE_S0;
76
77         return error;
78 }
79
80 /**
81  *      acpi_pm_enter - Actually enter a sleep state.
82  *      @pm_state: ignored
83  *
84  *      Flush caches and go to sleep. For STR or S2, we have to call
85  *      arch-specific assembly, which in turn call acpi_enter_sleep_state().
86  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
87  */
88
89 static int acpi_pm_enter(suspend_state_t pm_state)
90 {
91         acpi_status status = AE_OK;
92         unsigned long flags = 0;
93         u32 acpi_state = acpi_target_sleep_state;
94
95         ACPI_FLUSH_CPU_CACHE();
96
97         /* Do arch specific saving of state. */
98         if (acpi_state == ACPI_STATE_S2 || acpi_state == ACPI_STATE_S3) {
99                 int error = acpi_save_state_mem();
100
101                 if (error) {
102                         acpi_target_sleep_state = ACPI_STATE_S0;
103                         return error;
104                 }
105         }
106
107         local_irq_save(flags);
108         acpi_enable_wakeup_device(acpi_state);
109         switch (acpi_state) {
110         case ACPI_STATE_S1:
111                 barrier();
112                 status = acpi_enter_sleep_state(acpi_state);
113                 break;
114
115         case ACPI_STATE_S2:
116         case ACPI_STATE_S3:
117                 do_suspend_lowlevel();
118                 break;
119         }
120
121         /* ACPI 3.0 specs (P62) says that it's the responsabilty
122          * of the OSPM to clear the status bit [ implying that the
123          * POWER_BUTTON event should not reach userspace ]
124          */
125         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
126                 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
127
128         local_irq_restore(flags);
129         printk(KERN_DEBUG "Back to C!\n");
130
131         /* restore processor state */
132         if (acpi_state == ACPI_STATE_S2 || acpi_state == ACPI_STATE_S3)
133                 acpi_restore_state_mem();
134
135         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
136 }
137
138 /**
139  *      acpi_pm_finish - Finish up suspend sequence.
140  *      @pm_state: ignored
141  *
142  *      This is called after we wake back up (or if entering the sleep state
143  *      failed). 
144  */
145
146 static int acpi_pm_finish(suspend_state_t pm_state)
147 {
148         u32 acpi_state = acpi_target_sleep_state;
149
150         acpi_leave_sleep_state(acpi_state);
151         acpi_disable_wakeup_device(acpi_state);
152
153         /* reset firmware waking vector */
154         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
155
156         acpi_target_sleep_state = ACPI_STATE_S0;
157
158         if (init_8259A_after_S1) {
159                 printk("Broken toshiba laptop -> kicking interrupts\n");
160                 init_8259A(0);
161         }
162         return 0;
163 }
164
165 int acpi_suspend(u32 acpi_state)
166 {
167         suspend_state_t states[] = {
168                 [1] = PM_SUSPEND_STANDBY,
169                 [3] = PM_SUSPEND_MEM,
170                 [5] = PM_SUSPEND_MAX
171         };
172
173         if (acpi_state < 6 && states[acpi_state])
174                 return pm_suspend(states[acpi_state]);
175         if (acpi_state == 4)
176                 return hibernate();
177         return -EINVAL;
178 }
179
180 static int acpi_pm_state_valid(suspend_state_t pm_state)
181 {
182         u32 acpi_state;
183
184         switch (pm_state) {
185         case PM_SUSPEND_ON:
186         case PM_SUSPEND_STANDBY:
187         case PM_SUSPEND_MEM:
188                 acpi_state = acpi_suspend_states[pm_state];
189
190                 return sleep_states[acpi_state];
191         default:
192                 return 0;
193         }
194 }
195
196 static struct pm_ops acpi_pm_ops = {
197         .valid = acpi_pm_state_valid,
198         .set_target = acpi_pm_set_target,
199         .prepare = acpi_pm_prepare,
200         .enter = acpi_pm_enter,
201         .finish = acpi_pm_finish,
202 };
203
204 #ifdef CONFIG_SOFTWARE_SUSPEND
205 static int acpi_hibernation_prepare(void)
206 {
207         return acpi_sleep_prepare(ACPI_STATE_S4);
208 }
209
210 static int acpi_hibernation_enter(void)
211 {
212         acpi_status status = AE_OK;
213         unsigned long flags = 0;
214
215         ACPI_FLUSH_CPU_CACHE();
216
217         local_irq_save(flags);
218         acpi_enable_wakeup_device(ACPI_STATE_S4);
219         /* This shouldn't return.  If it returns, we have a problem */
220         status = acpi_enter_sleep_state(ACPI_STATE_S4);
221         local_irq_restore(flags);
222
223         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
224 }
225
226 static void acpi_hibernation_finish(void)
227 {
228         acpi_leave_sleep_state(ACPI_STATE_S4);
229         acpi_disable_wakeup_device(ACPI_STATE_S4);
230
231         /* reset firmware waking vector */
232         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
233
234         if (init_8259A_after_S1) {
235                 printk("Broken toshiba laptop -> kicking interrupts\n");
236                 init_8259A(0);
237         }
238 }
239
240 static int acpi_hibernation_pre_restore(void)
241 {
242         acpi_status status;
243
244         status = acpi_hw_disable_all_gpes();
245
246         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
247 }
248
249 static void acpi_hibernation_restore_cleanup(void)
250 {
251         acpi_hw_enable_all_runtime_gpes();
252 }
253
254 static struct hibernation_ops acpi_hibernation_ops = {
255         .prepare = acpi_hibernation_prepare,
256         .enter = acpi_hibernation_enter,
257         .finish = acpi_hibernation_finish,
258         .pre_restore = acpi_hibernation_pre_restore,
259         .restore_cleanup = acpi_hibernation_restore_cleanup,
260 };
261 #endif                          /* CONFIG_SOFTWARE_SUSPEND */
262
263 /*
264  * Toshiba fails to preserve interrupts over S1, reinitialization
265  * of 8259 is needed after S1 resume.
266  */
267 static int __init init_ints_after_s1(struct dmi_system_id *d)
268 {
269         printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident);
270         init_8259A_after_S1 = 1;
271         return 0;
272 }
273
274 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
275         {
276          .callback = init_ints_after_s1,
277          .ident = "Toshiba Satellite 4030cdt",
278          .matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),},
279          },
280         {},
281 };
282
283 int __init acpi_sleep_init(void)
284 {
285         int i = 0;
286
287         dmi_check_system(acpisleep_dmi_table);
288
289         if (acpi_disabled)
290                 return 0;
291
292         printk(KERN_INFO PREFIX "(supports");
293         for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
294                 acpi_status status;
295                 u8 type_a, type_b;
296                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
297                 if (ACPI_SUCCESS(status)) {
298                         sleep_states[i] = 1;
299                         printk(" S%d", i);
300                 }
301         }
302         printk(")\n");
303
304         pm_set_ops(&acpi_pm_ops);
305
306 #ifdef CONFIG_SOFTWARE_SUSPEND
307         if (sleep_states[ACPI_STATE_S4])
308                 hibernation_set_ops(&acpi_hibernation_ops);
309 #else
310         sleep_states[ACPI_STATE_S4] = 0;
311 #endif
312
313         return 0;
314 }