arch/powerpc/oprofile/op_model_cell.c

   1 /*
   2  * Cell Broadband Engine OProfile Support
   3  *
   4  * (C) Copyright IBM Corporation 2006
   5  *
   6  * Author: David Erb (djerb@us.ibm.com)
   7  * Modifications:
   8  *         Carl Love <carll@us.ibm.com>
   9  *         Maynard Johnson <maynardj@us.ibm.com>
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License
  13  * as published by the Free Software Foundation; either version
  14  * 2 of the License, or (at your option) any later version.
  15  */
  16
  17 #include <linux/cpufreq.h>
  18 #include <linux/delay.h>
  19 #include <linux/init.h>
  20 #include <linux/jiffies.h>
  21 #include <linux/kthread.h>
  22 #include <linux/oprofile.h>
  23 #include <linux/percpu.h>
  24 #include <linux/smp.h>
  25 #include <linux/spinlock.h>
  26 #include <linux/timer.h>
  27 #include <asm/cell-pmu.h>
  28 #include <asm/cputable.h>
  29 #include <asm/firmware.h>
  30 #include <asm/io.h>
  31 #include <asm/oprofile_impl.h>
  32 #include <asm/processor.h>
  33 #include <asm/prom.h>
  34 #include <asm/ptrace.h>
  35 #include <asm/reg.h>
  36 #include <asm/rtas.h>
  37 #include <asm/system.h>
  38
  39 #include "../platforms/cell/interrupt.h"
  40
  41 #define PPU_CYCLES_EVENT_NUM 1  /*  event number for CYCLES */
  42 #define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */
  43
  44 #define NUM_THREADS 2
  45 #define VIRT_CNTR_SW_TIME_NS 100000000  // 0.5 seconds
  46
  47 struct pmc_cntrl_data {
  48         unsigned long vcntr;
  49         unsigned long evnts;
  50         unsigned long masks;
  51         unsigned long enabled;
  52 };
  53
  54 /*
  55  * ibm,cbe-perftools rtas parameters
  56  */
  57
  58 struct pm_signal {
  59         u16 cpu;                /* Processor to modify */
  60         u16 sub_unit;           /* hw subunit this applies to (if applicable) */
  61         u16 signal_group;       /* Signal Group to Enable/Disable */
  62         u8 bus_word;            /* Enable/Disable on this Trace/Trigger/Event
  63                                  * Bus Word(s) (bitmask)
  64                                  */
  65         u8 bit;                 /* Trigger/Event bit (if applicable) */
  66 };
  67
  68 /*
  69  * rtas call arguments
  70  */
  71 enum {
  72         SUBFUNC_RESET = 1,
  73         SUBFUNC_ACTIVATE = 2,
  74         SUBFUNC_DEACTIVATE = 3,
  75
  76         PASSTHRU_IGNORE = 0,
  77         PASSTHRU_ENABLE = 1,
  78         PASSTHRU_DISABLE = 2,
  79 };
  80
  81 struct pm_cntrl {
  82         u16 enable;
  83         u16 stop_at_max;
  84         u16 trace_mode;
  85         u16 freeze;
  86         u16 count_mode;
  87 };
  88
  89 static struct {
  90         u32 group_control;
  91         u32 debug_bus_control;
  92         struct pm_cntrl pm_cntrl;
  93         u32 pm07_cntrl[NR_PHYS_CTRS];
  94 } pm_regs;
  95
  96
  97 #define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12)
  98 #define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4)
  99 #define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8)
 100 #define GET_POLARITY(x) ((x & 0x00000002) >> 1)
 101 #define GET_COUNT_CYCLES(x) (x & 0x00000001)
 102 #define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2)
 103
 104
 105 static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values);
 106
 107 static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS];
 108
 109 /* Interpetation of hdw_thread:
 110  * 0 - even virtual cpus 0, 2, 4,...
 111  * 1 - odd virtual cpus 1, 3, 5, ...
 112  */
 113 static u32 hdw_thread;
 114
 115 static u32 virt_cntr_inter_mask;
 116 static struct timer_list timer_virt_cntr;
 117
 118 /* pm_signal needs to be global since it is initialized in
 119  * cell_reg_setup at the time when the necessary information
 120  * is available.
 121  */
 122 static struct pm_signal pm_signal[NR_PHYS_CTRS];
 123 static int pm_rtas_token;
 124
 125 static u32 reset_value[NR_PHYS_CTRS];
 126 static int num_counters;
 127 static int oprofile_running;
 128 static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED;
 129
 130 static u32 ctr_enabled;
 131
 132 static unsigned char trace_bus[4];
 133 static unsigned char input_bus[2];
 134
 135 /*
 136  * Firmware interface functions
 137  */
 138 static int
 139 rtas_ibm_cbe_perftools(int subfunc, int passthru,
 140                        void *address, unsigned long length)
 141 {
 142         u64 paddr = __pa(address);
 143
 144         return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc, passthru,
 145                          paddr >> 32, paddr & 0xffffffff, length);
 146 }
 147
 148 static void pm_rtas_reset_signals(u32 node)
 149 {
 150         int ret;
 151         struct pm_signal pm_signal_local;
 152
 153         /*  The debug bus is being set to the passthru disable state.
 154          *  However, the FW still expects atleast one legal signal routing
 155          *  entry or it will return an error on the arguments.  If we don't
 156          *  supply a valid entry, we must ignore all return values.  Ignoring
 157          *  all return values means we might miss an error we should be
 158          *  concerned about.
 159          */
 160
 161         /*  fw expects physical cpu #. */
 162         pm_signal_local.cpu = node;
 163         pm_signal_local.signal_group = 21;
 164         pm_signal_local.bus_word = 1;
 165         pm_signal_local.sub_unit = 0;
 166         pm_signal_local.bit = 0;
 167
 168         ret = rtas_ibm_cbe_perftools(SUBFUNC_RESET, PASSTHRU_DISABLE,
 169                                      &pm_signal_local,
 170                                      sizeof(struct pm_signal));
 171
 172         if (ret)
 173                 printk(KERN_WARNING "%s: rtas returned: %d\n",
 174                        __FUNCTION__, ret);
 175 }
 176
 177 static void pm_rtas_activate_signals(u32 node, u32 count)
 178 {
 179         int ret;
 180         int j;
 181         struct pm_signal pm_signal_local[NR_PHYS_CTRS];
 182
 183         for (j = 0; j < count; j++) {
 184                 /* fw expects physical cpu # */
 185                 pm_signal_local[j].cpu = node;
 186                 pm_signal_local[j].signal_group = pm_signal[j].signal_group;
 187                 pm_signal_local[j].bus_word = pm_signal[j].bus_word;
 188                 pm_signal_local[j].sub_unit = pm_signal[j].sub_unit;
 189                 pm_signal_local[j].bit = pm_signal[j].bit;
 190         }
 191
 192         ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE,
 193                                      pm_signal_local,
 194                                      count * sizeof(struct pm_signal));
 195
 196         if (ret)
 197                 printk(KERN_WARNING "%s: rtas returned: %d\n",
 198                        __FUNCTION__, ret);
 199 }
 200
 201 /*
 202  * PM Signal functions
 203  */
 204 static void set_pm_event(u32 ctr, int event, u32 unit_mask)
 205 {
 206         struct pm_signal *p;
 207         u32 signal_bit;
 208         u32 bus_word, bus_type, count_cycles, polarity, input_control;
 209         int j, i;
 210
 211         if (event == PPU_CYCLES_EVENT_NUM) {
 212                 /* Special Event: Count all cpu cycles */
 213                 pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES;
 214                 p = &(pm_signal[ctr]);
 215                 p->signal_group = 21;
 216                 p->bus_word = 1;
 217                 p->sub_unit = 0;
 218                 p->bit = 0;
 219                 goto out;
 220         } else {
 221                 pm_regs.pm07_cntrl[ctr] = 0;
 222         }
 223
 224         bus_word = GET_BUS_WORD(unit_mask);
 225         bus_type = GET_BUS_TYPE(unit_mask);
 226         count_cycles = GET_COUNT_CYCLES(unit_mask);
 227         polarity = GET_POLARITY(unit_mask);
 228         input_control = GET_INPUT_CONTROL(unit_mask);
 229         signal_bit = (event % 100);
 230
 231         p = &(pm_signal[ctr]);
 232
 233         p->signal_group = event / 100;
 234         p->bus_word = bus_word;
 235         p->sub_unit = unit_mask & 0x0000f000;
 236
 237         pm_regs.pm07_cntrl[ctr] = 0;
 238         pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles);
 239         pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity);
 240         pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control);
 241
 242         if (input_control == 0) {
 243                 if (signal_bit > 31) {
 244                         signal_bit -= 32;
 245                         if (bus_word == 0x3)
 246                                 bus_word = 0x2;
 247                         else if (bus_word == 0xc)
 248                                 bus_word = 0x8;
 249                 }
 250
 251                 if ((bus_type == 0) && p->signal_group >= 60)
 252                         bus_type = 2;
 253                 if ((bus_type == 1) && p->signal_group >= 50)
 254                         bus_type = 0;
 255
 256                 pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_MUX(signal_bit);
 257         } else {
 258                 pm_regs.pm07_cntrl[ctr] = 0;
 259                 p->bit = signal_bit;
 260         }
 261
 262         for (i = 0; i < 4; i++) {
 263                 if (bus_word & (1 << i)) {
 264                         pm_regs.debug_bus_control |=
 265                             (bus_type << (31 - (2 * i) + 1));
 266
 267                         for (j = 0; j < 2; j++) {
 268                                 if (input_bus[j] == 0xff) {
 269                                         input_bus[j] = i;
 270                                         pm_regs.group_control |=
 271                                             (i << (31 - i));
 272                                         break;
 273                                 }
 274                         }
 275                 }
 276         }
 277 out:
 278         ;
 279 }
 280
 281 static void write_pm_cntrl(int cpu, struct pm_cntrl *pm_cntrl)
 282 {
 283         /* Oprofile will use 32 bit counters, set bits 7:10 to 0 */
 284         u32 val = 0;
 285         if (pm_cntrl->enable == 1)
 286                 val |= CBE_PM_ENABLE_PERF_MON;
 287
 288         if (pm_cntrl->stop_at_max == 1)
 289                 val |= CBE_PM_STOP_AT_MAX;
 290
 291         if (pm_cntrl->trace_mode == 1)
 292                 val |= CBE_PM_TRACE_MODE_SET(pm_cntrl->trace_mode);
 293
 294         if (pm_cntrl->freeze == 1)
 295                 val |= CBE_PM_FREEZE_ALL_CTRS;
 296
 297         /* Routine set_count_mode must be called previously to set
 298          * the count mode based on the user selection of user and kernel.
 299          */
 300         val |= CBE_PM_COUNT_MODE_SET(pm_cntrl->count_mode);
 301         cbe_write_pm(cpu, pm_control, val);
 302 }
 303
 304 static inline void
 305 set_count_mode(u32 kernel, u32 user, struct pm_cntrl *pm_cntrl)
 306 {
 307         /* The user must specify user and kernel if they want them. If
 308          *  neither is specified, OProfile will count in hypervisor mode
 309          */
 310         if (kernel) {
 311                 if (user)
 312                         pm_cntrl->count_mode = CBE_COUNT_ALL_MODES;
 313                 else
 314                         pm_cntrl->count_mode = CBE_COUNT_SUPERVISOR_MODE;
 315         } else {
 316                 if (user)
 317                         pm_cntrl->count_mode = CBE_COUNT_PROBLEM_MODE;
 318                 else
 319                         pm_cntrl->count_mode = CBE_COUNT_HYPERVISOR_MODE;
 320         }
 321 }
 322
 323 static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl)
 324 {
 325
 326         pm07_cntrl[ctr] |= PM07_CTR_ENABLE(1);
 327         cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]);
 328 }
 329
 330 /*
 331  * Oprofile is expected to collect data on all CPUs simultaneously.
 332  * However, there is one set of performance counters per node.  There are
 333  * two hardware threads or virtual CPUs on each node.  Hence, OProfile must
 334  * multiplex in time the performance counter collection on the two virtual
 335  * CPUs.  The multiplexing of the performance counters is done by this
 336  * virtual counter routine.
 337  *
 338  * The pmc_values used below is defined as 'per-cpu' but its use is
 339  * more akin to 'per-node'.  We need to store two sets of counter
 340  * values per node -- one for the previous run and one for the next.
 341  * The per-cpu[NR_PHYS_CTRS] gives us the storage we need.  Each odd/even
 342  * pair of per-cpu arrays is used for storing the previous and next
 343  * pmc values for a given node.
 344  * NOTE: We use the per-cpu variable to improve cache performance.
 345  */
 346 static void cell_virtual_cntr(unsigned long data)
 347 {
 348         /* This routine will alternate loading the virtual counters for
 349          * virtual CPUs
 350          */
 351         int i, prev_hdw_thread, next_hdw_thread;
 352         u32 cpu;
 353         unsigned long flags;
 354
 355         /* Make sure that the interrupt_hander and
 356          * the virt counter are not both playing with
 357          * the counters on the same node.
 358          */
 359
 360         spin_lock_irqsave(&virt_cntr_lock, flags);
 361
 362         prev_hdw_thread = hdw_thread;
 363
 364         /* switch the cpu handling the interrupts */
 365         hdw_thread = 1 ^ hdw_thread;
 366         next_hdw_thread = hdw_thread;
 367
 368         /* The following is done only once per each node, but
 369          * we need cpu #, not node #, to pass to the cbe_xxx functions.
 370          */
 371         for_each_online_cpu(cpu) {
 372                 if (cbe_get_hw_thread_id(cpu))
 373                         continue;
 374
 375                 /* stop counters, save counter values, restore counts
 376                  * for previous thread
 377                  */
 378                 cbe_disable_pm(cpu);
 379                 cbe_disable_pm_interrupts(cpu);
 380                 for (i = 0; i < num_counters; i++) {
 381                         per_cpu(pmc_values, cpu + prev_hdw_thread)[i]
 382                             = cbe_read_ctr(cpu, i);
 383
 384                         if (per_cpu(pmc_values, cpu + next_hdw_thread)[i]
 385                             == 0xFFFFFFFF)
 386                                 /* If the cntr value is 0xffffffff, we must
 387                                  * reset that to 0xfffffff0 when the current
 388                                  * thread is restarted.  This will generate a new
 389                                  * interrupt and make sure that we never restore
 390                                  * the counters to the max value.  If the counters
 391                                  * were restored to the max value, they do not
 392                                  * increment and no interrupts are generated.  Hence
 393                                  * no more samples will be collected on that cpu.
 394                                  */
 395                                 cbe_write_ctr(cpu, i, 0xFFFFFFF0);
 396                         else
 397                                 cbe_write_ctr(cpu, i,
 398                                               per_cpu(pmc_values,
 399                                                       cpu +
 400                                                       next_hdw_thread)[i]);
 401                 }
 402
 403                 /* Switch to the other thread. Change the interrupt
 404                  * and control regs to be scheduled on the CPU
 405                  * corresponding to the thread to execute.
 406                  */
 407                 for (i = 0; i < num_counters; i++) {
 408                         if (pmc_cntrl[next_hdw_thread][i].enabled) {
 409                                 /* There are some per thread events.
 410                                  * Must do the set event, enable_cntr
 411                                  * for each cpu.
 412                                  */
 413                                 set_pm_event(i,
 414                                      pmc_cntrl[next_hdw_thread][i].evnts,
 415                                      pmc_cntrl[next_hdw_thread][i].masks);
 416                                 enable_ctr(cpu, i,
 417                                            pm_regs.pm07_cntrl);
 418                         } else {
 419                                 cbe_write_pm07_control(cpu, i, 0);
 420                         }
 421                 }
 422
 423                 /* Enable interrupts on the CPU thread that is starting */
 424                 cbe_enable_pm_interrupts(cpu, next_hdw_thread,
 425                                          virt_cntr_inter_mask);
 426                 cbe_enable_pm(cpu);
 427         }
 428
 429         spin_unlock_irqrestore(&virt_cntr_lock, flags);
 430
 431         mod_timer(&timer_virt_cntr, jiffies + HZ / 10);
 432 }
 433
 434 static void start_virt_cntrs(void)
 435 {
 436         init_timer(&timer_virt_cntr);
 437         timer_virt_cntr.function = cell_virtual_cntr;
 438         timer_virt_cntr.data = 0UL;
 439         timer_virt_cntr.expires = jiffies + HZ / 10;
 440         add_timer(&timer_virt_cntr);
 441 }
 442
 443 /* This function is called once for all cpus combined */
 444 static void
 445 cell_reg_setup(struct op_counter_config *ctr,
 446                struct op_system_config *sys, int num_ctrs)
 447 {
 448         int i, j, cpu;
 449
 450         pm_rtas_token = rtas_token("ibm,cbe-perftools");
 451         if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) {
 452                 printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE\n",
 453                        __FUNCTION__);
 454                 goto out;
 455         }
 456
 457         num_counters = num_ctrs;
 458
 459         pm_regs.group_control = 0;
 460         pm_regs.debug_bus_control = 0;
 461
 462         /* setup the pm_control register */
 463         memset(&pm_regs.pm_cntrl, 0, sizeof(struct pm_cntrl));
 464         pm_regs.pm_cntrl.stop_at_max = 1;
 465         pm_regs.pm_cntrl.trace_mode = 0;
 466         pm_regs.pm_cntrl.freeze = 1;
 467
 468         set_count_mode(sys->enable_kernel, sys->enable_user,
 469                        &pm_regs.pm_cntrl);
 470
 471         /* Setup the thread 0 events */
 472         for (i = 0; i < num_ctrs; ++i) {
 473
 474                 pmc_cntrl[0][i].evnts = ctr[i].event;
 475                 pmc_cntrl[0][i].masks = ctr[i].unit_mask;
 476                 pmc_cntrl[0][i].enabled = ctr[i].enabled;
 477                 pmc_cntrl[0][i].vcntr = i;
 478
 479                 for_each_possible_cpu(j)
 480                         per_cpu(pmc_values, j)[i] = 0;
 481         }
 482
 483         /* Setup the thread 1 events, map the thread 0 event to the
 484          * equivalent thread 1 event.
 485          */
 486         for (i = 0; i < num_ctrs; ++i) {
 487                 if ((ctr[i].event >= 2100) && (ctr[i].event <= 2111))
 488                         pmc_cntrl[1][i].evnts = ctr[i].event + 19;
 489                 else if (ctr[i].event == 2203)
 490                         pmc_cntrl[1][i].evnts = ctr[i].event;
 491                 else if ((ctr[i].event >= 2200) && (ctr[i].event <= 2215))
 492                         pmc_cntrl[1][i].evnts = ctr[i].event + 16;
 493                 else
 494                         pmc_cntrl[1][i].evnts = ctr[i].event;
 495
 496                 pmc_cntrl[1][i].masks = ctr[i].unit_mask;
 497                 pmc_cntrl[1][i].enabled = ctr[i].enabled;
 498                 pmc_cntrl[1][i].vcntr = i;
 499         }
 500
 501         for (i = 0; i < 4; i++)
 502                 trace_bus[i] = 0xff;
 503
 504         for (i = 0; i < 2; i++)
 505                 input_bus[i] = 0xff;
 506
 507         /* Our counters count up, and "count" refers to
 508          * how much before the next interrupt, and we interrupt
 509          * on overflow.  So we calculate the starting value
 510          * which will give us "count" until overflow.
 511          * Then we set the events on the enabled counters.
 512          */
 513         for (i = 0; i < num_counters; ++i) {
 514                 /* start with virtual counter set 0 */
 515                 if (pmc_cntrl[0][i].enabled) {
 516                         /* Using 32bit counters, reset max - count */
 517                         reset_value[i] = 0xFFFFFFFF - ctr[i].count;
 518                         set_pm_event(i,
 519                                      pmc_cntrl[0][i].evnts,
 520                                      pmc_cntrl[0][i].masks);
 521
 522                         /* global, used by cell_cpu_setup */
 523                         ctr_enabled |= (1 << i);
 524                 }
 525         }
 526
 527         /* initialize the previous counts for the virtual cntrs */
 528         for_each_online_cpu(cpu)
 529                 for (i = 0; i < num_counters; ++i) {
 530                         per_cpu(pmc_values, cpu)[i] = reset_value[i];
 531                 }
 532 out:
 533         ;
 534 }
 535
 536 /* This function is called once for each cpu */
 537 static void cell_cpu_setup(struct op_counter_config *cntr)
 538 {
 539         u32 cpu = smp_processor_id();
 540         u32 num_enabled = 0;
 541         int i;
 542
 543         /* There is one performance monitor per processor chip (i.e. node),
 544          * so we only need to perform this function once per node.
 545          */
 546         if (cbe_get_hw_thread_id(cpu))
 547                 goto out;
 548
 549         if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) {
 550                 printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE\n",
 551                        __FUNCTION__);
 552                 goto out;
 553         }
 554
 555         /* Stop all counters */
 556         cbe_disable_pm(cpu);
 557         cbe_disable_pm_interrupts(cpu);
 558
 559         cbe_write_pm(cpu, pm_interval, 0);
 560         cbe_write_pm(cpu, pm_start_stop, 0);
 561         cbe_write_pm(cpu, group_control, pm_regs.group_control);
 562         cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control);
 563         write_pm_cntrl(cpu, &pm_regs.pm_cntrl);
 564
 565         for (i = 0; i < num_counters; ++i) {
 566                 if (ctr_enabled & (1 << i)) {
 567                         pm_signal[num_enabled].cpu = cbe_cpu_to_node(cpu);
 568                         num_enabled++;
 569                 }
 570         }
 571
 572         pm_rtas_activate_signals(cbe_cpu_to_node(cpu), num_enabled);
 573 out:
 574         ;
 575 }
 576
 577 static void cell_global_start(struct op_counter_config *ctr)
 578 {
 579         u32 cpu;
 580         u32 interrupt_mask = 0;
 581         u32 i;
 582
 583         /* This routine gets called once for the system.
 584          * There is one performance monitor per node, so we
 585          * only need to perform this function once per node.
 586          */
 587         for_each_online_cpu(cpu) {
 588                 if (cbe_get_hw_thread_id(cpu))
 589                         continue;
 590
 591                 interrupt_mask = 0;
 592
 593                 for (i = 0; i < num_counters; ++i) {
 594                         if (ctr_enabled & (1 << i)) {
 595                                 cbe_write_ctr(cpu, i, reset_value[i]);
 596                                 enable_ctr(cpu, i, pm_regs.pm07_cntrl);
 597                                 interrupt_mask |=
 598                                     CBE_PM_CTR_OVERFLOW_INTR(i);
 599                         } else {
 600                                 /* Disable counter */
 601                                 cbe_write_pm07_control(cpu, i, 0);
 602                         }
 603                 }
 604
 605                 cbe_clear_pm_interrupts(cpu);
 606                 cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask);
 607                 cbe_enable_pm(cpu);
 608         }
 609
 610         virt_cntr_inter_mask = interrupt_mask;
 611         oprofile_running = 1;
 612         smp_wmb();
 613
 614         /* NOTE: start_virt_cntrs will result in cell_virtual_cntr() being
 615          * executed which manipulates the PMU.  We start the "virtual counter"
 616          * here so that we do not need to synchronize access to the PMU in
 617          * the above for-loop.
 618          */
 619         start_virt_cntrs();
 620 }
 621
 622 static void cell_global_stop(void)
 623 {
 624         int cpu;
 625
 626         /* This routine will be called once for the system.
 627          * There is one performance monitor per node, so we
 628          * only need to perform this function once per node.
 629          */
 630         del_timer_sync(&timer_virt_cntr);
 631         oprofile_running = 0;
 632         smp_wmb();
 633
 634         for_each_online_cpu(cpu) {
 635                 if (cbe_get_hw_thread_id(cpu))
 636                         continue;
 637
 638                 cbe_sync_irq(cbe_cpu_to_node(cpu));
 639                 /* Stop the counters */
 640                 cbe_disable_pm(cpu);
 641
 642                 /* Deactivate the signals */
 643                 pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
 644
 645                 /* Deactivate interrupts */
 646                 cbe_disable_pm_interrupts(cpu);
 647         }
 648 }
 649
 650 static void
 651 cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr)
 652 {
 653         u32 cpu;
 654         u64 pc;
 655         int is_kernel;
 656         unsigned long flags = 0;
 657         u32 interrupt_mask;
 658         int i;
 659
 660         cpu = smp_processor_id();
 661
 662         /* Need to make sure the interrupt handler and the virt counter
 663          * routine are not running at the same time. See the
 664          * cell_virtual_cntr() routine for additional comments.
 665          */
 666         spin_lock_irqsave(&virt_cntr_lock, flags);
 667
 668         /* Need to disable and reenable the performance counters
 669          * to get the desired behavior from the hardware.  This
 670          * is hardware specific.
 671          */
 672
 673         cbe_disable_pm(cpu);
 674
 675         interrupt_mask = cbe_clear_pm_interrupts(cpu);
 676
 677         /* If the interrupt mask has been cleared, then the virt cntr
 678          * has cleared the interrupt.  When the thread that generated
 679          * the interrupt is restored, the data count will be restored to
 680          * 0xffffff0 to cause the interrupt to be regenerated.
 681          */
 682
 683         if ((oprofile_running == 1) && (interrupt_mask != 0)) {
 684                 pc = regs->nip;
 685                 is_kernel = is_kernel_addr(pc);
 686
 687                 for (i = 0; i < num_counters; ++i) {
 688                         if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i))
 689                             && ctr[i].enabled) {
 690                                 oprofile_add_pc(pc, is_kernel, i);
 691                                 cbe_write_ctr(cpu, i, reset_value[i]);
 692                         }
 693                 }
 694
 695                 /* The counters were frozen by the interrupt.
 696                  * Reenable the interrupt and restart the counters.
 697                  * If there was a race between the interrupt handler and
 698                  * the virtual counter routine.  The virutal counter
 699                  * routine may have cleared the interrupts.  Hence must
 700                  * use the virt_cntr_inter_mask to re-enable the interrupts.
 701                  */
 702                 cbe_enable_pm_interrupts(cpu, hdw_thread,
 703                                          virt_cntr_inter_mask);
 704
 705                 /* The writes to the various performance counters only writes
 706                  * to a latch.  The new values (interrupt setting bits, reset
 707                  * counter value etc.) are not copied to the actual registers
 708                  * until the performance monitor is enabled.  In order to get
 709                  * this to work as desired, the permormance monitor needs to
 710                  * be disabled while writting to the latches.  This is a
 711                  * HW design issue.
 712                  */
 713                 cbe_enable_pm(cpu);
 714         }
 715         spin_unlock_irqrestore(&virt_cntr_lock, flags);
 716 }
 717
 718 struct op_powerpc_model op_model_cell = {
 719         .reg_setup = cell_reg_setup,
 720         .cpu_setup = cell_cpu_setup,
 721         .global_start = cell_global_start,
 722         .global_stop = cell_global_stop,
 723         .handle_interrupt = cell_handle_interrupt,
 724 };