arch/powerpc/boot/dts/pcm030.dts

   1 /*
   2  * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
   3  *
   4  * Copyright 2006 Pengutronix
   5  * Sascha Hauer <s.hauer@pengutronix.de>
   6  * Copyright 2007 Pengutronix
   7  * Juergen Beisert <j.beisert@pengutronix.de>
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14
  15 /dts-v1/;
  16
  17 / {
  18         model = "phytec,pcm030";
  19         compatible = "phytec,pcm030";
  20         #address-cells = <1>;
  21         #size-cells = <1>;
  22
  23         cpus {
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26
  27                 PowerPC,5200@0 {
  28                         device_type = "cpu";
  29                         reg = <0>;
  30                         d-cache-line-size = <32>;
  31                         i-cache-line-size = <32>;
  32                         d-cache-size = <0x4000>;        /* L1, 16K          */
  33                         i-cache-size = <0x4000>;        /* L1, 16K          */
  34                         timebase-frequency = <0>;       /* From Bootloader  */
  35                         bus-frequency = <0>;            /* From Bootloader  */
  36                         clock-frequency = <0>;          /* From Bootloader  */
  37                 };
  38         };
  39
  40         memory {
  41                 device_type = "memory";
  42                 reg = <0x00000000 0x04000000>;  /* 64MB */
  43         };
  44
  45         soc5200@f0000000 {
  46                 #address-cells = <1>;
  47                 #size-cells = <1>;
  48                 compatible = "fsl,mpc5200b-immr";
  49                 ranges = <0x0 0xf0000000 0x0000c000>;
  50                 bus-frequency = <0>;            /* From bootloader */
  51                 system-frequency = <0>;         /* From bootloader */
  52
  53                 cdm@200 {
  54                         compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
  55                         reg = <0x200 0x38>;
  56                 };
  57
  58                 mpc5200_pic: interrupt-controller@500 {
  59                         /* 5200 interrupts are encoded into two levels; */
  60                         interrupt-controller;
  61                         #interrupt-cells = <3>;
  62                         device_type = "interrupt-controller";
  63                         compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
  64                         reg = <0x500 0x80>;
  65                 };
  66
  67                 timer@600 {     /* General Purpose Timer */
  68                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  69                         cell-index = <0>;
  70                         reg = <0x600 0x10>;
  71                         interrupts = <0x1 0x9 0x0>;
  72                         interrupt-parent = <&mpc5200_pic>;
  73                         fsl,has-wdt;
  74                 };
  75
  76                 timer@610 {     /* General Purpose Timer */
  77                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  78                         cell-index = <1>;
  79                         reg = <0x610 0x10>;
  80                         interrupts = <0x1 0xa 0x0>;
  81                         interrupt-parent = <&mpc5200_pic>;
  82                 };
  83
  84                 gpt2: timer@620 { /* General Purpose Timer in GPIO mode */
  85                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
  86                         cell-index = <2>;
  87                         reg = <0x620 0x10>;
  88                         interrupts = <0x1 0xb 0x0>;
  89                         interrupt-parent = <&mpc5200_pic>;
  90                         gpio-controller;
  91                         #gpio-cells = <2>;
  92                 };
  93
  94                 gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
  95                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
  96                         cell-index = <3>;
  97                         reg = <0x630 0x10>;
  98                         interrupts = <0x1 0xc 0x0>;
  99                         interrupt-parent = <&mpc5200_pic>;
 100                         gpio-controller;
 101                         #gpio-cells = <2>;
 102                 };
 103
 104                 gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
 105                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
 106                         cell-index = <4>;
 107                         reg = <0x640 0x10>;
 108                         interrupts = <0x1 0xd 0x0>;
 109                         interrupt-parent = <&mpc5200_pic>;
 110                         gpio-controller;
 111                         #gpio-cells = <2>;
 112                 };
 113
 114                 gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
 115                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
 116                         cell-index = <5>;
 117                         reg = <0x650 0x10>;
 118                         interrupts = <0x1 0xe 0x0>;
 119                         interrupt-parent = <&mpc5200_pic>;
 120                         gpio-controller;
 121                         #gpio-cells = <2>;
 122                 };
 123
 124                 gpt6: timer@660 { /* General Purpose Timer in GPIO mode */
 125                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
 126                         cell-index = <6>;
 127                         reg = <0x660 0x10>;
 128                         interrupts = <0x1 0xf 0x0>;
 129                         interrupt-parent = <&mpc5200_pic>;
 130                         gpio-controller;
 131                         #gpio-cells = <2>;
 132                 };
 133
 134                 gpt7: timer@670 { /* General Purpose Timer in GPIO mode */
 135                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
 136                         cell-index = <7>;
 137                         reg = <0x670 0x10>;
 138                         interrupts = <0x1 0x10 0x0>;
 139                         interrupt-parent = <&mpc5200_pic>;
 140                         gpio-controller;
 141                         #gpio-cells = <2>;
 142                 };
 143
 144                 rtc@800 {       // Real time clock
 145                         compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
 146                         device_type = "rtc";
 147                         reg = <0x800 0x100>;
 148                         interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>;
 149                         interrupt-parent = <&mpc5200_pic>;
 150                 };
 151
 152                 can@900 {
 153                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 154                         cell-index = <0>;
 155                         interrupts = <0x2 0x11 0x0>;
 156                         interrupt-parent = <&mpc5200_pic>;
 157                         reg = <0x900 0x80>;
 158                 };
 159
 160                 can@980 {
 161                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 162                         cell-index = <1>;
 163                         interrupts = <0x2 0x12 0x0>;
 164                         interrupt-parent = <&mpc5200_pic>;
 165                         reg = <0x980 0x80>;
 166                 };
 167
 168                 gpio_simple: gpio@b00 {
 169                         compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
 170                         reg = <0xb00 0x40>;
 171                         interrupts = <0x1 0x7 0x0>;
 172                         interrupt-parent = <&mpc5200_pic>;
 173                         gpio-controller;
 174                         #gpio-cells = <2>;
 175                 };
 176
 177                 gpio_wkup: gpio-wkup@c00 {
 178                         compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
 179                         reg = <0xc00 0x40>;
 180                         interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>;
 181                         interrupt-parent = <&mpc5200_pic>;
 182                         gpio-controller;
 183                         #gpio-cells = <2>;
 184                 };
 185
 186                 spi@f00 {
 187                         compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 188                         reg = <0xf00 0x20>;
 189                         interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>;
 190                         interrupt-parent = <&mpc5200_pic>;
 191                 };
 192
 193                 usb@1000 {
 194                         compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
 195                         reg = <0x1000 0xff>;
 196                         interrupts = <0x2 0x6 0x0>;
 197                         interrupt-parent = <&mpc5200_pic>;
 198                 };
 199
 200                 dma-controller@1200 {
 201                         device_type = "dma-controller";
 202                         compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
 203                         reg = <0x1200 0x80>;
 204                         interrupts = <0x3 0x0 0x0  0x3 0x1 0x0  0x3 0x2 0x0  0x3 0x3 0x0
 205                                       0x3 0x4 0x0  0x3 0x5 0x0  0x3 0x6 0x0  0x3 0x7 0x0
 206                                       0x3 0x8 0x0  0x3 0x9 0x0  0x3 0xa 0x0  0x3 0xb 0x0
 207                                       0x3 0xc 0x0  0x3 0xd 0x0  0x3 0xe 0x0  0x3 0xf 0x0>;
 208                         interrupt-parent = <&mpc5200_pic>;
 209                 };
 210
 211                 xlb@1f00 {
 212                         compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
 213                         reg = <0x1f00 0x100>;
 214                 };
 215
 216                 ac97@2000 { /* PSC1 in ac97 mode */
 217                         device_type = "sound";
 218                         compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 219                         cell-index = <0>;
 220                         reg = <0x2000 0x100>;
 221                         interrupts = <0x2 0x2 0x0>;
 222                         interrupt-parent = <&mpc5200_pic>;
 223                 };
 224
 225                 /* PSC2 port is used by CAN1/2 */
 226
 227                 serial@2400 { /* PSC3 in UART mode */
 228                         device_type = "serial";
 229                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 230                         port-number = <0>;
 231                         cell-index = <2>;
 232                         reg = <0x2400 0x100>;
 233                         interrupts = <0x2 0x3 0x0>;
 234                         interrupt-parent = <&mpc5200_pic>;
 235                 };
 236
 237                 /* PSC4 is ??? */
 238
 239                 /* PSC5 is ??? */
 240
 241                 serial@2c00 { /* PSC6 in UART mode */
 242                         device_type = "serial";
 243                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 244                         port-number = <1>;
 245                         cell-index = <5>;
 246                         reg = <0x2c00 0x100>;
 247                         interrupts = <0x2 0x4 0x0>;
 248                         interrupt-parent = <&mpc5200_pic>;
 249                 };
 250
 251                 ethernet@3000 {
 252                         device_type = "network";
 253                         compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
 254                         reg = <0x3000 0x400>;
 255                         local-mac-address = [00 00 00 00 00 00];
 256                         interrupts = <0x2 0x5 0x0>;
 257                         interrupt-parent = <&mpc5200_pic>;
 258                         phy-handle = <&phy0>;
 259                 };
 260
 261                 mdio@3000 {
 262                         #address-cells = <1>;
 263                         #size-cells = <0>;
 264                         compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
 265                         reg = <0x3000 0x400>;   /* fec range, since we need to setup fec interrupts */
 266                         interrupts = <0x2 0x5 0x0>;     /* these are for "mii command finished", not link changes & co. */
 267                         interrupt-parent = <&mpc5200_pic>;
 268
 269                         phy0:ethernet-phy@0 {
 270                                 device_type = "ethernet-phy";
 271                                 reg = <0x0>;
 272                         };
 273                 };
 274
 275                 ata@3a00 {
 276                         device_type = "ata";
 277                         compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
 278                         reg = <0x3a00 0x100>;
 279                         interrupts = <0x2 0x7 0x0>;
 280                         interrupt-parent = <&mpc5200_pic>;
 281                 };
 282
 283                 i2c@3d00 {
 284                         #address-cells = <1>;
 285                         #size-cells = <0>;
 286                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 287                         cell-index = <0>;
 288                         reg = <0x3d00 0x40>;
 289                         interrupts = <0x2 0xf 0x0>;
 290                         interrupt-parent = <&mpc5200_pic>;
 291                         fsl5200-clocking;
 292                 };
 293
 294                 i2c@3d40 {
 295                         #address-cells = <1>;
 296                         #size-cells = <0>;
 297                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 298                         cell-index = <1>;
 299                         reg = <0x3d40 0x40>;
 300                         interrupts = <0x2 0x10 0x0>;
 301                         interrupt-parent = <&mpc5200_pic>;
 302                         fsl5200-clocking;
 303                         rtc@51 {
 304                                 device_type = "rtc";
 305                                 compatible = "nxp,pcf8563";
 306                                 reg = <0x51>;
 307                         };
 308                         /* FIXME: EEPROM */
 309                 };
 310
 311                 sram@8000 {
 312                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
 313                         reg = <0x8000 0x4000>;
 314                 };
 315
 316                 /* This is only an example device to show the usage of gpios. It maps all available
 317                  * gpios to the "gpio-provider" device.
 318                  */
 319                 gpio {
 320                         compatible = "gpio-provider";
 321
 322                                                     /* mpc52xx          exp.con         patchfield */
 323                         gpios = <&gpio_wkup     0 0 /* GPIO_WKUP_7      11d             jp13-3     */
 324                                  &gpio_wkup     1 0 /* GPIO_WKUP_6      14c                        */
 325                                  &gpio_wkup     6 0 /* PSC2_4           43c             x5-11      */
 326                                  &gpio_simple   2 0 /* IRDA_1           24c             x7-6    set GPS_PORT_CONFIG[IRDA] = 0 */
 327                                  &gpio_simple   3 0 /* IRDA_0                           x8-5    set GPS_PORT_CONFIG[IRDA] = 0 */
 328                                  &gpt2          0 0 /* timer2           12d             x4-4       */
 329                                  &gpt3          0 0 /* timer3           13d             x6-4       */
 330                                  &gpt4          0 0 /* timer4           61c             x2-16      */
 331                                  &gpt5          0 0 /* timer5           44c             x7-11      */
 332                                  &gpt6          0 0 /* timer6           60c             x8-15      */
 333                                  &gpt7          0 0 /* timer7           36a             x17-9      */
 334                                  >;
 335                 };
 336         };
 337
 338         pci@f0000d00 {
 339                 #interrupt-cells = <1>;
 340                 #size-cells = <2>;
 341                 #address-cells = <3>;
 342                 device_type = "pci";
 343                 compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
 344                 reg = <0xf0000d00 0x100>;
 345                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 346                 interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */
 347                                  0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3
 348                                  0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3
 349                                  0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3
 350
 351                                  0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */
 352                                  0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3
 353                                  0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3
 354                                  0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>;
 355                 clock-frequency = <0>; // From boot loader
 356                 interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>;
 357                 interrupt-parent = <&mpc5200_pic>;
 358                 bus-range = <0 0>;
 359                 ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
 360                           0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 361                           0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>;
 362         };
 363 };