arch/powerpc/boot/dts/mpc8313erdb.dts

   1 /*
   2  * MPC8313E RDB Device Tree Source
   3  *
   4  * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "MPC8313ERDB";
  16         compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet0;
  22                 ethernet1 = &enet1;
  23                 serial0 = &serial0;
  24                 serial1 = &serial1;
  25                 pci0 = &pci0;
  26         };
  27
  28         cpus {
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31
  32                 PowerPC,8313@0 {
  33                         device_type = "cpu";
  34                         reg = <0x0>;
  35                         d-cache-line-size = <32>;
  36                         i-cache-line-size = <32>;
  37                         d-cache-size = <16384>;
  38                         i-cache-size = <16384>;
  39                         timebase-frequency = <0>;       // from bootloader
  40                         bus-frequency = <0>;            // from bootloader
  41                         clock-frequency = <0>;          // from bootloader
  42                 };
  43         };
  44
  45         memory {
  46                 device_type = "memory";
  47                 reg = <0x00000000 0x08000000>;  // 128MB at 0
  48         };
  49
  50         localbus@e0005000 {
  51                 #address-cells = <2>;
  52                 #size-cells = <1>;
  53                 compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
  54                 reg = <0xe0005000 0x1000>;
  55                 interrupts = <77 0x8>;
  56                 interrupt-parent = <&ipic>;
  57
  58                 // CS0 and CS1 are swapped when
  59                 // booting from nand, but the
  60                 // addresses are the same.
  61                 ranges = <0x0 0x0 0xfe000000 0x00800000
  62                           0x1 0x0 0xe2800000 0x00008000
  63                           0x2 0x0 0xf0000000 0x00020000
  64                           0x3 0x0 0xfa000000 0x00008000>;
  65
  66                 flash@0,0 {
  67                         #address-cells = <1>;
  68                         #size-cells = <1>;
  69                         compatible = "cfi-flash";
  70                         reg = <0x0 0x0 0x800000>;
  71                         bank-width = <2>;
  72                         device-width = <1>;
  73                 };
  74
  75                 nand@1,0 {
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78                         compatible = "fsl,mpc8313-fcm-nand",
  79                                      "fsl,elbc-fcm-nand";
  80                         reg = <0x1 0x0 0x2000>;
  81
  82                         u-boot@0 {
  83                                 reg = <0x0 0x100000>;
  84                                 read-only;
  85                         };
  86
  87                         kernel@100000 {
  88                                 reg = <0x100000 0x300000>;
  89                         };
  90
  91                         fs@400000 {
  92                                 reg = <0x400000 0x1c00000>;
  93                         };
  94                 };
  95         };
  96
  97         soc8313@e0000000 {
  98                 #address-cells = <1>;
  99                 #size-cells = <1>;
 100                 device_type = "soc";
 101                 compatible = "simple-bus";
 102                 ranges = <0x0 0xe0000000 0x00100000>;
 103                 reg = <0xe0000000 0x00000200>;
 104                 bus-frequency = <0>;
 105
 106                 wdt@200 {
 107                         device_type = "watchdog";
 108                         compatible = "mpc83xx_wdt";
 109                         reg = <0x200 0x100>;
 110                 };
 111
 112                 sleep-nexus {
 113                         #address-cells = <1>;
 114                         #size-cells = <1>;
 115                         compatible = "simple-bus";
 116                         sleep = <&pmc 0x03000000>;
 117                         ranges;
 118
 119                         i2c@3000 {
 120                                 #address-cells = <1>;
 121                                 #size-cells = <0>;
 122                                 cell-index = <0>;
 123                                 compatible = "fsl-i2c";
 124                                 reg = <0x3000 0x100>;
 125                                 interrupts = <14 0x8>;
 126                                 interrupt-parent = <&ipic>;
 127                                 dfsrr;
 128                                 rtc@68 {
 129                                         compatible = "dallas,ds1339";
 130                                         reg = <0x68>;
 131                                 };
 132                         };
 133
 134                         crypto@30000 {
 135                                 compatible = "fsl,sec2.2", "fsl,sec2.1",
 136                                              "fsl,sec2.0";
 137                                 reg = <0x30000 0x10000>;
 138                                 interrupts = <11 0x8>;
 139                                 interrupt-parent = <&ipic>;
 140                                 fsl,num-channels = <1>;
 141                                 fsl,channel-fifo-len = <24>;
 142                                 fsl,exec-units-mask = <0x4c>;
 143                                 fsl,descriptor-types-mask = <0x0122003f>;
 144                         };
 145                 };
 146
 147                 i2c@3100 {
 148                         #address-cells = <1>;
 149                         #size-cells = <0>;
 150                         cell-index = <1>;
 151                         compatible = "fsl-i2c";
 152                         reg = <0x3100 0x100>;
 153                         interrupts = <15 0x8>;
 154                         interrupt-parent = <&ipic>;
 155                         dfsrr;
 156                 };
 157
 158                 spi@7000 {
 159                         cell-index = <0>;
 160                         compatible = "fsl,spi";
 161                         reg = <0x7000 0x1000>;
 162                         interrupts = <16 0x8>;
 163                         interrupt-parent = <&ipic>;
 164                         mode = "cpu";
 165                 };
 166
 167                 /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 168                 usb@23000 {
 169                         compatible = "fsl-usb2-dr";
 170                         reg = <0x23000 0x1000>;
 171                         #address-cells = <1>;
 172                         #size-cells = <0>;
 173                         interrupt-parent = <&ipic>;
 174                         interrupts = <38 0x8>;
 175                         phy_type = "utmi_wide";
 176                         sleep = <&pmc 0x00300000>;
 177                 };
 178
 179                 enet0: ethernet@24000 {
 180                         #address-cells = <1>;
 181                         #size-cells = <1>;
 182                         sleep = <&pmc 0x20000000>;
 183                         ranges;
 184
 185                         cell-index = <0>;
 186                         device_type = "network";
 187                         model = "eTSEC";
 188                         compatible = "gianfar";
 189                         reg = <0x24000 0x1000>;
 190                         local-mac-address = [ 00 00 00 00 00 00 ];
 191                         interrupts = <37 0x8 36 0x8 35 0x8>;
 192                         interrupt-parent = <&ipic>;
 193                         tbi-handle = < &tbi0 >;
 194                         /* Vitesse 7385 isn't on the MDIO bus */
 195                         fixed-link = <1 1 1000 0 0>;
 196                         fsl,magic-packet;
 197
 198                         mdio@24520 {
 199                                 #address-cells = <1>;
 200                                 #size-cells = <0>;
 201                                 compatible = "fsl,gianfar-mdio";
 202                                 reg = <0x24520 0x20>;
 203                                 phy4: ethernet-phy@4 {
 204                                         interrupt-parent = <&ipic>;
 205                                         interrupts = <20 0x8>;
 206                                         reg = <0x4>;
 207                                         device_type = "ethernet-phy";
 208                                 };
 209                                 tbi0: tbi-phy@11 {
 210                                         reg = <0x11>;
 211                                         device_type = "tbi-phy";
 212                                 };
 213                         };
 214                 };
 215
 216                 enet1: ethernet@25000 {
 217                         #address-cells = <1>;
 218                         #size-cells = <1>;
 219                         cell-index = <1>;
 220                         device_type = "network";
 221                         model = "eTSEC";
 222                         compatible = "gianfar";
 223                         reg = <0x25000 0x1000>;
 224                         local-mac-address = [ 00 00 00 00 00 00 ];
 225                         interrupts = <34 0x8 33 0x8 32 0x8>;
 226                         interrupt-parent = <&ipic>;
 227                         tbi-handle = < &tbi1 >;
 228                         phy-handle = < &phy4 >;
 229                         sleep = <&pmc 0x10000000>;
 230                         fsl,magic-packet;
 231
 232                         mdio@25520 {
 233                                 #address-cells = <1>;
 234                                 #size-cells = <0>;
 235                                 compatible = "fsl,gianfar-tbi";
 236                                 reg = <0x25520 0x20>;
 237
 238                                 tbi1: tbi-phy@11 {
 239                                         reg = <0x11>;
 240                                         device_type = "tbi-phy";
 241                                 };
 242                         };
 243
 244
 245                 };
 246
 247                 serial0: serial@4500 {
 248                         cell-index = <0>;
 249                         device_type = "serial";
 250                         compatible = "ns16550";
 251                         reg = <0x4500 0x100>;
 252                         clock-frequency = <0>;
 253                         interrupts = <9 0x8>;
 254                         interrupt-parent = <&ipic>;
 255                 };
 256
 257                 serial1: serial@4600 {
 258                         cell-index = <1>;
 259                         device_type = "serial";
 260                         compatible = "ns16550";
 261                         reg = <0x4600 0x100>;
 262                         clock-frequency = <0>;
 263                         interrupts = <10 0x8>;
 264                         interrupt-parent = <&ipic>;
 265                 };
 266
 267                 /* IPIC
 268                  * interrupts cell = <intr #, sense>
 269                  * sense values match linux IORESOURCE_IRQ_* defines:
 270                  * sense == 8: Level, low assertion
 271                  * sense == 2: Edge, high-to-low change
 272                  */
 273                 ipic: pic@700 {
 274                         interrupt-controller;
 275                         #address-cells = <0>;
 276                         #interrupt-cells = <2>;
 277                         reg = <0x700 0x100>;
 278                         device_type = "ipic";
 279                 };
 280
 281                 pmc: power@b00 {
 282                         compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
 283                         reg = <0xb00 0x100 0xa00 0x100>;
 284                         interrupts = <80 8>;
 285                         interrupt-parent = <&ipic>;
 286                         fsl,mpc8313-wakeup-timer = <&gtm1>;
 287
 288                         /* Remove this (or change to "okay") if you have
 289                          * a REVA3 or later board, if you apply one of the
 290                          * workarounds listed in section 8.5 of the board
 291                          * manual, or if you are adapting this device tree
 292                          * to a different board.
 293                          */
 294                         status = "fail";
 295                 };
 296
 297                 gtm1: timer@500 {
 298                         compatible = "fsl,mpc8313-gtm", "fsl,gtm";
 299                         reg = <0x500 0x100>;
 300                         interrupts = <90 8 78 8 84 8 72 8>;
 301                         interrupt-parent = <&ipic>;
 302                 };
 303
 304                 timer@600 {
 305                         compatible = "fsl,mpc8313-gtm", "fsl,gtm";
 306                         reg = <0x600 0x100>;
 307                         interrupts = <91 8 79 8 85 8 73 8>;
 308                         interrupt-parent = <&ipic>;
 309                 };
 310         };
 311
 312         sleep-nexus {
 313                 #address-cells = <1>;
 314                 #size-cells = <1>;
 315                 compatible = "simple-bus";
 316                 sleep = <&pmc 0x00010000>;
 317                 ranges;
 318
 319                 pci0: pci@e0008500 {
 320                         cell-index = <1>;
 321                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 322                         interrupt-map = <
 323                                         /* IDSEL 0x0E -mini PCI */
 324                                          0x7000 0x0 0x0 0x1 &ipic 18 0x8
 325                                          0x7000 0x0 0x0 0x2 &ipic 18 0x8
 326                                          0x7000 0x0 0x0 0x3 &ipic 18 0x8
 327                                          0x7000 0x0 0x0 0x4 &ipic 18 0x8
 328
 329                                         /* IDSEL 0x0F - PCI slot */
 330                                          0x7800 0x0 0x0 0x1 &ipic 17 0x8
 331                                          0x7800 0x0 0x0 0x2 &ipic 18 0x8
 332                                          0x7800 0x0 0x0 0x3 &ipic 17 0x8
 333                                          0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
 334                         interrupt-parent = <&ipic>;
 335                         interrupts = <66 0x8>;
 336                         bus-range = <0x0 0x0>;
 337                         ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 338                                   0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 339                                   0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
 340                         clock-frequency = <66666666>;
 341                         #interrupt-cells = <1>;
 342                         #size-cells = <2>;
 343                         #address-cells = <3>;
 344                         reg = <0xe0008500 0x100         /* internal registers */
 345                                0xe0008300 0x8>;         /* config space access registers */
 346                         compatible = "fsl,mpc8349-pci";
 347                         device_type = "pci";
 348                 };
 349
 350                 dma@82a8 {
 351                         #address-cells = <1>;
 352                         #size-cells = <1>;
 353                         compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
 354                         reg = <0xe00082a8 4>;
 355                         ranges = <0 0xe0008100 0x1a8>;
 356                         interrupt-parent = <&ipic>;
 357                         interrupts = <71 8>;
 358
 359                         dma-channel@0 {
 360                                 compatible = "fsl,mpc8313-dma-channel",
 361                                              "fsl,elo-dma-channel";
 362                                 reg = <0 0x28>;
 363                                 interrupt-parent = <&ipic>;
 364                                 interrupts = <71 8>;
 365                                 cell-index = <0>;
 366                         };
 367
 368                         dma-channel@80 {
 369                                 compatible = "fsl,mpc8313-dma-channel",
 370                                              "fsl,elo-dma-channel";
 371                                 reg = <0x80 0x28>;
 372                                 interrupt-parent = <&ipic>;
 373                                 interrupts = <71 8>;
 374                                 cell-index = <1>;
 375                         };
 376
 377                         dma-channel@100 {
 378                                 compatible = "fsl,mpc8313-dma-channel",
 379                                              "fsl,elo-dma-channel";
 380                                 reg = <0x100 0x28>;
 381                                 interrupt-parent = <&ipic>;
 382                                 interrupts = <71 8>;
 383                                 cell-index = <2>;
 384                         };
 385
 386                         dma-channel@180 {
 387                                 compatible = "fsl,mpc8313-dma-channel",
 388                                              "fsl,elo-dma-channel";
 389                                 reg = <0x180 0x28>;
 390                                 interrupt-parent = <&ipic>;
 391                                 interrupts = <71 8>;
 392                                 cell-index = <3>;
 393                         };
 394                 };
 395         };
 396 };