powerpc/mpc7448: add alias list to DTS, clean out old chosen node
[linux-2.6.git] / arch / powerpc / boot / dts / mpc7448hpc2.dts
1 /*
2  * MPC7448HPC2 (Taiga) board Device Tree Source
3  *
4  * Copyright 2006, 2008 Freescale Semiconductor Inc.
5  * 2006 Roy Zang <Roy Zang at freescale.com>.
6  *
7  * This program is free software; you can redistribute  it and/or modify it
8  * under  the terms of  the GNU General  Public License as published by the
9  * Free Software Foundation;  either version 2 of the  License, or (at your
10  * option) any later version.
11  */
12
13 /dts-v1/;
14
15 / {
16         model = "mpc7448hpc2";
17         compatible = "mpc74xx";
18         #address-cells = <1>;
19         #size-cells = <1>;
20
21         aliases {
22                 ethernet0 = &enet0;
23                 ethernet1 = &enet1;
24
25                 serial0 = &serial0;
26                 serial1 = &serial1;
27
28                 pci0 = &pci0;
29         };
30
31         cpus {
32                 #address-cells = <1>;
33                 #size-cells =<0>;
34                                 
35                 PowerPC,7448@0 {
36                         device_type = "cpu";
37                         reg = <0x0>;
38                         d-cache-line-size = <32>;       // 32 bytes
39                         i-cache-line-size = <32>;       // 32 bytes
40                         d-cache-size = <0x8000>;                // L1, 32K bytes
41                         i-cache-size = <0x8000>;                // L1, 32K bytes
42                         timebase-frequency = <0>;       // 33 MHz, from uboot
43                         clock-frequency = <0>;          // From U-Boot
44                         bus-frequency = <0>;            // From U-Boot
45                 };
46         };
47
48         memory {
49                 device_type = "memory";
50                 reg = <0x0 0x20000000   // DDR2   512M at 0
51                        >;
52         };
53
54         tsi108@c0000000 {
55                 #address-cells = <1>;
56                 #size-cells = <1>;
57                 device_type = "tsi-bridge";
58                 ranges = <0x0 0xc0000000 0x10000>;
59                 reg = <0xc0000000 0x10000>;
60                 bus-frequency = <0>;
61
62                 i2c@7000 {
63                         interrupt-parent = <&mpic>;
64                         interrupts = <14 0>;
65                         reg = <0x7000 0x400>;
66                         device_type = "i2c";
67                         compatible  = "tsi108-i2c";
68                 };
69
70                 MDIO: mdio@6000 {
71                         device_type = "mdio";
72                         compatible = "tsi108-mdio";
73                         reg = <0x6000 0x50>;
74                         #address-cells = <1>;
75                         #size-cells = <0>;
76
77                         phy8: ethernet-phy@8 {
78                                 interrupt-parent = <&mpic>;
79                                 interrupts = <2 1>;
80                                 reg = <0x8>;
81                         };
82
83                         phy9: ethernet-phy@9 {
84                                 interrupt-parent = <&mpic>;
85                                 interrupts = <2 1>;
86                                 reg = <0x9>;
87                         };
88
89                 };
90
91                 enet0: ethernet@6200 {
92                         linux,network-index = <0>;
93                         #size-cells = <0>;
94                         device_type = "network";
95                         compatible = "tsi108-ethernet";
96                         reg = <0x6000 0x200>;
97                         address = [ 00 06 D2 00 00 01 ];
98                         interrupts = <16 2>;
99                         interrupt-parent = <&mpic>;
100                         mdio-handle = <&MDIO>;
101                         phy-handle = <&phy8>;
102                 };
103
104                 enet1: ethernet@6600 {
105                         linux,network-index = <1>;
106                         #address-cells = <1>;
107                         #size-cells = <0>;
108                         device_type = "network";
109                         compatible = "tsi108-ethernet";
110                         reg = <0x6400 0x200>;
111                         address = [ 00 06 D2 00 00 02 ];
112                         interrupts = <17 2>;
113                         interrupt-parent = <&mpic>;
114                         mdio-handle = <&MDIO>;
115                         phy-handle = <&phy9>;
116                 };
117
118                 serial0: serial@7808 {
119                         device_type = "serial";
120                         compatible = "ns16550";
121                         reg = <0x7808 0x200>;
122                         clock-frequency = <1064000000>;
123                         interrupts = <12 0>;
124                         interrupt-parent = <&mpic>;
125                 };
126
127                 serial1: serial@7c08 {
128                         device_type = "serial";
129                         compatible = "ns16550";
130                         reg = <0x7c08 0x200>;
131                         clock-frequency = <1064000000>;
132                         interrupts = <13 0>;
133                         interrupt-parent = <&mpic>;
134                 };
135
136                 mpic: pic@7400 {
137                         interrupt-controller;
138                         #address-cells = <0>;
139                         #interrupt-cells = <2>;
140                         reg = <0x7400 0x400>;
141                         compatible = "chrp,open-pic";
142                         device_type = "open-pic";
143                 };
144                 pci0: pci@1000 {
145                         compatible = "tsi108-pci";
146                         device_type = "pci";
147                         #interrupt-cells = <1>;
148                         #size-cells = <2>;
149                         #address-cells = <3>;
150                         reg = <0x1000 0x1000>;
151                         bus-range = <0 0>;
152                         ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000    
153                                   0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>;
154                         clock-frequency = <133333332>;
155                         interrupt-parent = <&mpic>;
156                         interrupts = <23 2>;
157                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
158                         interrupt-map = <
159
160                                 /* IDSEL 0x11 */
161                                 0x800 0x0 0x0 0x1 &RT0 0x24 0x0
162                                 0x800 0x0 0x0 0x2 &RT0 0x25 0x0
163                                 0x800 0x0 0x0 0x3 &RT0 0x26 0x0
164                                 0x800 0x0 0x0 0x4 &RT0 0x27 0x0
165
166                                 /* IDSEL 0x12 */
167                                 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
168                                 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
169                                 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
170                                 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
171
172                                 /* IDSEL 0x13 */
173                                 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
174                                 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
175                                 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
176                                 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
177
178                                 /* IDSEL 0x14 */
179                                 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
180                                 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
181                                 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
182                                 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
183                                 >;
184
185                         RT0: router@1180 {
186                                 clock-frequency = <0>;
187                                 interrupt-controller;
188                                 device_type = "pic-router";
189                                 #address-cells = <0>;
190                                 #interrupt-cells = <2>;
191                                 big-endian;
192                                 interrupts = <23 2>;
193                                 interrupt-parent = <&mpic>;
194                         };
195                 };
196         };
197 };