Blackfin arch: Clean oprofile build path for blackfin
[linux-2.6.git] / arch / blackfin / mach-bf561 / boards / generic_board.c
1 /*
2  * File:         arch/blackfin/mach-bf561/generic_board.c
3  * Based on:     arch/blackfin/mach-bf533/ezkit.c
4  * Author:       Aidan Williams <aidan@nicta.com.au>
5  *
6  * Created:
7  * Description:
8  *
9  * Modified:
10  *               Copyright 2005 National ICT Australia (NICTA)
11  *               Copyright 2004-2006 Analog Devices Inc.
12  *
13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
14  *
15  * This program is free software; you can redistribute it and/or modify
16  * it under the terms of the GNU General Public License as published by
17  * the Free Software Foundation; either version 2 of the License, or
18  * (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
23  * GNU General Public License for more details.
24  *
25  * You should have received a copy of the GNU General Public License
26  * along with this program; if not, see the file COPYING, or write
27  * to the Free Software Foundation, Inc.,
28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
29  */
30
31 #include <linux/device.h>
32 #include <linux/platform_device.h>
33 #include <linux/irq.h>
34
35 const char bfin_board_name[] = "UNKNOWN BOARD";
36
37 /*
38  *  Driver needs to know address, irq and flag pin.
39  */
40 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
41 static struct resource smc91x_resources[] = {
42         {
43                 .start = 0x2C010300,
44                 .end = 0x2C010300 + 16,
45                 .flags = IORESOURCE_MEM,
46         }, {
47                 .start = IRQ_PROG_INTB,
48                 .end = IRQ_PROG_INTB,
49                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
50         }, {
51                 .start = IRQ_PF9,
52                 .end = IRQ_PF9,
53                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
54         },
55 };
56
57 static struct platform_device smc91x_device = {
58         .name = "smc91x",
59         .id = 0,
60         .num_resources = ARRAY_SIZE(smc91x_resources),
61         .resource = smc91x_resources,
62 };
63 #endif
64
65 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
66 #ifdef CONFIG_BFIN_SIR0
67 static struct resource bfin_sir0_resources[] = {
68         {
69                 .start = 0xFFC00400,
70                 .end = 0xFFC004FF,
71                 .flags = IORESOURCE_MEM,
72         },
73         {
74                 .start = IRQ_UART0_RX,
75                 .end = IRQ_UART0_RX+1,
76                 .flags = IORESOURCE_IRQ,
77         },
78         {
79                 .start = CH_UART0_RX,
80                 .end = CH_UART0_RX+1,
81                 .flags = IORESOURCE_DMA,
82         },
83 };
84
85 static struct platform_device bfin_sir0_device = {
86         .name = "bfin_sir",
87         .id = 0,
88         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
89         .resource = bfin_sir0_resources,
90 };
91 #endif
92 #endif
93
94 static struct platform_device *generic_board_devices[] __initdata = {
95 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
96         &smc91x_device,
97 #endif
98
99 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
100 #ifdef CONFIG_BFIN_SIR0
101         &bfin_sir0_device,
102 #endif
103 #endif
104 };
105
106 static int __init generic_board_init(void)
107 {
108         printk(KERN_INFO "%s(): registering device resources\n", __func__);
109         return platform_add_devices(generic_board_devices,
110                                     ARRAY_SIZE(generic_board_devices));
111 }
112
113 arch_initcall(generic_board_init);