arch/arm/mach-at91/at91sam9rl_devices.c

   1 /*
   2  *  Copyright (C) 2007 Atmel Corporation
   3  *
   4  * This file is subject to the terms and conditions of the GNU General Public
   5  * License.  See the file COPYING in the main directory of this archive for
   6  * more details.
   7  */
   8
   9 #include <asm/mach/arch.h>
  10 #include <asm/mach/map.h>
  11
  12 #include <linux/dma-mapping.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/i2c-gpio.h>
  15
  16 #include <linux/fb.h>
  17 #include <video/atmel_lcdc.h>
  18
  19 #include <mach/board.h>
  20 #include <mach/gpio.h>
  21 #include <mach/at91sam9rl.h>
  22 #include <mach/at91sam9rl_matrix.h>
  23 #include <mach/at91sam9_smc.h>
  24 #include <mach/at_hdmac.h>
  25
  26 #include "generic.h"
  27
  28
  29 /* --------------------------------------------------------------------
  30  *  HDMAC - AHB DMA Controller
  31  * -------------------------------------------------------------------- */
  32
  33 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
  34 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
  35
  36 static struct at_dma_platform_data atdma_pdata = {
  37         .nr_channels    = 2,
  38 };
  39
  40 static struct resource hdmac_resources[] = {
  41         [0] = {
  42                 .start  = AT91_BASE_SYS + AT91_DMA,
  43                 .end    = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
  44                 .flags  = IORESOURCE_MEM,
  45         },
  46         [2] = {
  47                 .start  = AT91SAM9RL_ID_DMA,
  48                 .end    = AT91SAM9RL_ID_DMA,
  49                 .flags  = IORESOURCE_IRQ,
  50         },
  51 };
  52
  53 static struct platform_device at_hdmac_device = {
  54         .name           = "at_hdmac",
  55         .id             = -1,
  56         .dev            = {
  57                                 .dma_mask               = &hdmac_dmamask,
  58                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
  59                                 .platform_data          = &atdma_pdata,
  60         },
  61         .resource       = hdmac_resources,
  62         .num_resources  = ARRAY_SIZE(hdmac_resources),
  63 };
  64
  65 void __init at91_add_device_hdmac(void)
  66 {
  67         dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
  68         platform_device_register(&at_hdmac_device);
  69 }
  70 #else
  71 void __init at91_add_device_hdmac(void) {}
  72 #endif
  73
  74 /* --------------------------------------------------------------------
  75  *  USB HS Device (Gadget)
  76  * -------------------------------------------------------------------- */
  77
  78 #if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
  79
  80 static struct resource usba_udc_resources[] = {
  81         [0] = {
  82                 .start  = AT91SAM9RL_UDPHS_FIFO,
  83                 .end    = AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
  84                 .flags  = IORESOURCE_MEM,
  85         },
  86         [1] = {
  87                 .start  = AT91SAM9RL_BASE_UDPHS,
  88                 .end    = AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
  89                 .flags  = IORESOURCE_MEM,
  90         },
  91         [2] = {
  92                 .start  = AT91SAM9RL_ID_UDPHS,
  93                 .end    = AT91SAM9RL_ID_UDPHS,
  94                 .flags  = IORESOURCE_IRQ,
  95         },
  96 };
  97
  98 #define EP(nam, idx, maxpkt, maxbk, dma, isoc)                  \
  99         [idx] = {                                               \
 100                 .name           = nam,                          \
 101                 .index          = idx,                          \
 102                 .fifo_size      = maxpkt,                       \
 103                 .nr_banks       = maxbk,                        \
 104                 .can_dma        = dma,                          \
 105                 .can_isoc       = isoc,                         \
 106         }
 107
 108 static struct usba_ep_data usba_udc_ep[] __initdata = {
 109         EP("ep0", 0, 64, 1, 0, 0),
 110         EP("ep1", 1, 1024, 2, 1, 1),
 111         EP("ep2", 2, 1024, 2, 1, 1),
 112         EP("ep3", 3, 1024, 3, 1, 0),
 113         EP("ep4", 4, 1024, 3, 1, 0),
 114         EP("ep5", 5, 1024, 3, 1, 1),
 115         EP("ep6", 6, 1024, 3, 1, 1),
 116 };
 117
 118 #undef EP
 119
 120 /*
 121  * pdata doesn't have room for any endpoints, so we need to
 122  * append room for the ones we need right after it.
 123  */
 124 static struct {
 125         struct usba_platform_data pdata;
 126         struct usba_ep_data ep[7];
 127 } usba_udc_data;
 128
 129 static struct platform_device at91_usba_udc_device = {
 130         .name           = "atmel_usba_udc",
 131         .id             = -1,
 132         .dev            = {
 133                                 .platform_data  = &usba_udc_data.pdata,
 134         },
 135         .resource       = usba_udc_resources,
 136         .num_resources  = ARRAY_SIZE(usba_udc_resources),
 137 };
 138
 139 void __init at91_add_device_usba(struct usba_platform_data *data)
 140 {
 141         /*
 142          * Invalid pins are 0 on AT91, but the usba driver is shared
 143          * with AVR32, which use negative values instead. Once/if
 144          * gpio_is_valid() is ported to AT91, revisit this code.
 145          */
 146         usba_udc_data.pdata.vbus_pin = -EINVAL;
 147         usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
 148         memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
 149
 150         if (data && data->vbus_pin > 0) {
 151                 at91_set_gpio_input(data->vbus_pin, 0);
 152                 at91_set_deglitch(data->vbus_pin, 1);
 153                 usba_udc_data.pdata.vbus_pin = data->vbus_pin;
 154         }
 155
 156         /* Pullup pin is handled internally by USB device peripheral */
 157
 158         /* Clocks */
 159         at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
 160         at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
 161
 162         platform_device_register(&at91_usba_udc_device);
 163 }
 164 #else
 165 void __init at91_add_device_usba(struct usba_platform_data *data) {}
 166 #endif
 167
 168
 169 /* --------------------------------------------------------------------
 170  *  MMC / SD
 171  * -------------------------------------------------------------------- */
 172
 173 #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
 174 static u64 mmc_dmamask = DMA_BIT_MASK(32);
 175 static struct at91_mmc_data mmc_data;
 176
 177 static struct resource mmc_resources[] = {
 178         [0] = {
 179                 .start  = AT91SAM9RL_BASE_MCI,
 180                 .end    = AT91SAM9RL_BASE_MCI + SZ_16K - 1,
 181                 .flags  = IORESOURCE_MEM,
 182         },
 183         [1] = {
 184                 .start  = AT91SAM9RL_ID_MCI,
 185                 .end    = AT91SAM9RL_ID_MCI,
 186                 .flags  = IORESOURCE_IRQ,
 187         },
 188 };
 189
 190 static struct platform_device at91sam9rl_mmc_device = {
 191         .name           = "at91_mci",
 192         .id             = -1,
 193         .dev            = {
 194                                 .dma_mask               = &mmc_dmamask,
 195                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 196                                 .platform_data          = &mmc_data,
 197         },
 198         .resource       = mmc_resources,
 199         .num_resources  = ARRAY_SIZE(mmc_resources),
 200 };
 201
 202 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 203 {
 204         if (!data)
 205                 return;
 206
 207         /* input/irq */
 208         if (data->det_pin) {
 209                 at91_set_gpio_input(data->det_pin, 1);
 210                 at91_set_deglitch(data->det_pin, 1);
 211         }
 212         if (data->wp_pin)
 213                 at91_set_gpio_input(data->wp_pin, 1);
 214         if (data->vcc_pin)
 215                 at91_set_gpio_output(data->vcc_pin, 0);
 216
 217         /* CLK */
 218         at91_set_A_periph(AT91_PIN_PA2, 0);
 219
 220         /* CMD */
 221         at91_set_A_periph(AT91_PIN_PA1, 1);
 222
 223         /* DAT0, maybe DAT1..DAT3 */
 224         at91_set_A_periph(AT91_PIN_PA0, 1);
 225         if (data->wire4) {
 226                 at91_set_A_periph(AT91_PIN_PA3, 1);
 227                 at91_set_A_periph(AT91_PIN_PA4, 1);
 228                 at91_set_A_periph(AT91_PIN_PA5, 1);
 229         }
 230
 231         mmc_data = *data;
 232         platform_device_register(&at91sam9rl_mmc_device);
 233 }
 234 #else
 235 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 236 #endif
 237
 238
 239 /* --------------------------------------------------------------------
 240  *  NAND / SmartMedia
 241  * -------------------------------------------------------------------- */
 242
 243 #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 244 static struct atmel_nand_data nand_data;
 245
 246 #define NAND_BASE       AT91_CHIPSELECT_3
 247
 248 static struct resource nand_resources[] = {
 249         [0] = {
 250                 .start  = NAND_BASE,
 251                 .end    = NAND_BASE + SZ_256M - 1,
 252                 .flags  = IORESOURCE_MEM,
 253         },
 254         [1] = {
 255                 .start  = AT91_BASE_SYS + AT91_ECC,
 256                 .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
 257                 .flags  = IORESOURCE_MEM,
 258         }
 259 };
 260
 261 static struct platform_device atmel_nand_device = {
 262         .name           = "atmel_nand",
 263         .id             = -1,
 264         .dev            = {
 265                                 .platform_data  = &nand_data,
 266         },
 267         .resource       = nand_resources,
 268         .num_resources  = ARRAY_SIZE(nand_resources),
 269 };
 270
 271 void __init at91_add_device_nand(struct atmel_nand_data *data)
 272 {
 273         unsigned long csa;
 274
 275         if (!data)
 276                 return;
 277
 278         csa = at91_sys_read(AT91_MATRIX_EBICSA);
 279         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 280
 281         /* enable pin */
 282         if (data->enable_pin)
 283                 at91_set_gpio_output(data->enable_pin, 1);
 284
 285         /* ready/busy pin */
 286         if (data->rdy_pin)
 287                 at91_set_gpio_input(data->rdy_pin, 1);
 288
 289         /* card detect pin */
 290         if (data->det_pin)
 291                 at91_set_gpio_input(data->det_pin, 1);
 292
 293         at91_set_A_periph(AT91_PIN_PB4, 0);             /* NANDOE */
 294         at91_set_A_periph(AT91_PIN_PB5, 0);             /* NANDWE */
 295
 296         nand_data = *data;
 297         platform_device_register(&atmel_nand_device);
 298 }
 299
 300 #else
 301 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 302 #endif
 303
 304
 305 /* --------------------------------------------------------------------
 306  *  TWI (i2c)
 307  * -------------------------------------------------------------------- */
 308
 309 /*
 310  * Prefer the GPIO code since the TWI controller isn't robust
 311  * (gets overruns and underruns under load) and can only issue
 312  * repeated STARTs in one scenario (the driver doesn't yet handle them).
 313  */
 314 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 315
 316 static struct i2c_gpio_platform_data pdata = {
 317         .sda_pin                = AT91_PIN_PA23,
 318         .sda_is_open_drain      = 1,
 319         .scl_pin                = AT91_PIN_PA24,
 320         .scl_is_open_drain      = 1,
 321         .udelay                 = 2,            /* ~100 kHz */
 322 };
 323
 324 static struct platform_device at91sam9rl_twi_device = {
 325         .name                   = "i2c-gpio",
 326         .id                     = -1,
 327         .dev.platform_data      = &pdata,
 328 };
 329
 330 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 331 {
 332         at91_set_GPIO_periph(AT91_PIN_PA23, 1);         /* TWD (SDA) */
 333         at91_set_multi_drive(AT91_PIN_PA23, 1);
 334
 335         at91_set_GPIO_periph(AT91_PIN_PA24, 1);         /* TWCK (SCL) */
 336         at91_set_multi_drive(AT91_PIN_PA24, 1);
 337
 338         i2c_register_board_info(0, devices, nr_devices);
 339         platform_device_register(&at91sam9rl_twi_device);
 340 }
 341
 342 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 343
 344 static struct resource twi_resources[] = {
 345         [0] = {
 346                 .start  = AT91SAM9RL_BASE_TWI0,
 347                 .end    = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
 348                 .flags  = IORESOURCE_MEM,
 349         },
 350         [1] = {
 351                 .start  = AT91SAM9RL_ID_TWI0,
 352                 .end    = AT91SAM9RL_ID_TWI0,
 353                 .flags  = IORESOURCE_IRQ,
 354         },
 355 };
 356
 357 static struct platform_device at91sam9rl_twi_device = {
 358         .name           = "at91_i2c",
 359         .id             = -1,
 360         .resource       = twi_resources,
 361         .num_resources  = ARRAY_SIZE(twi_resources),
 362 };
 363
 364 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 365 {
 366         /* pins used for TWI interface */
 367         at91_set_A_periph(AT91_PIN_PA23, 0);            /* TWD */
 368         at91_set_multi_drive(AT91_PIN_PA23, 1);
 369
 370         at91_set_A_periph(AT91_PIN_PA24, 0);            /* TWCK */
 371         at91_set_multi_drive(AT91_PIN_PA24, 1);
 372
 373         i2c_register_board_info(0, devices, nr_devices);
 374         platform_device_register(&at91sam9rl_twi_device);
 375 }
 376 #else
 377 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 378 #endif
 379
 380
 381 /* --------------------------------------------------------------------
 382  *  SPI
 383  * -------------------------------------------------------------------- */
 384
 385 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 386 static u64 spi_dmamask = DMA_BIT_MASK(32);
 387
 388 static struct resource spi_resources[] = {
 389         [0] = {
 390                 .start  = AT91SAM9RL_BASE_SPI,
 391                 .end    = AT91SAM9RL_BASE_SPI + SZ_16K - 1,
 392                 .flags  = IORESOURCE_MEM,
 393         },
 394         [1] = {
 395                 .start  = AT91SAM9RL_ID_SPI,
 396                 .end    = AT91SAM9RL_ID_SPI,
 397                 .flags  = IORESOURCE_IRQ,
 398         },
 399 };
 400
 401 static struct platform_device at91sam9rl_spi_device = {
 402         .name           = "atmel_spi",
 403         .id             = 0,
 404         .dev            = {
 405                                 .dma_mask               = &spi_dmamask,
 406                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 407         },
 408         .resource       = spi_resources,
 409         .num_resources  = ARRAY_SIZE(spi_resources),
 410 };
 411
 412 static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
 413
 414
 415 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 416 {
 417         int i;
 418         unsigned long cs_pin;
 419
 420         at91_set_A_periph(AT91_PIN_PA25, 0);    /* MISO */
 421         at91_set_A_periph(AT91_PIN_PA26, 0);    /* MOSI */
 422         at91_set_A_periph(AT91_PIN_PA27, 0);    /* SPCK */
 423
 424         /* Enable SPI chip-selects */
 425         for (i = 0; i < nr_devices; i++) {
 426                 if (devices[i].controller_data)
 427                         cs_pin = (unsigned long) devices[i].controller_data;
 428                 else
 429                         cs_pin = spi_standard_cs[devices[i].chip_select];
 430
 431                 /* enable chip-select pin */
 432                 at91_set_gpio_output(cs_pin, 1);
 433
 434                 /* pass chip-select pin to driver */
 435                 devices[i].controller_data = (void *) cs_pin;
 436         }
 437
 438         spi_register_board_info(devices, nr_devices);
 439         platform_device_register(&at91sam9rl_spi_device);
 440 }
 441 #else
 442 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
 443 #endif
 444
 445
 446 /* --------------------------------------------------------------------
 447  *  AC97
 448  * -------------------------------------------------------------------- */
 449
 450 #if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 451 static u64 ac97_dmamask = DMA_BIT_MASK(32);
 452 static struct ac97c_platform_data ac97_data;
 453
 454 static struct resource ac97_resources[] = {
 455         [0] = {
 456                 .start  = AT91SAM9RL_BASE_AC97C,
 457                 .end    = AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
 458                 .flags  = IORESOURCE_MEM,
 459         },
 460         [1] = {
 461                 .start  = AT91SAM9RL_ID_AC97C,
 462                 .end    = AT91SAM9RL_ID_AC97C,
 463                 .flags  = IORESOURCE_IRQ,
 464         },
 465 };
 466
 467 static struct platform_device at91sam9rl_ac97_device = {
 468         .name           = "atmel_ac97c",
 469         .id             = 0,
 470         .dev            = {
 471                                 .dma_mask               = &ac97_dmamask,
 472                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 473                                 .platform_data          = &ac97_data,
 474         },
 475         .resource       = ac97_resources,
 476         .num_resources  = ARRAY_SIZE(ac97_resources),
 477 };
 478
 479 void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 480 {
 481         if (!data)
 482                 return;
 483
 484         at91_set_A_periph(AT91_PIN_PD1, 0);     /* AC97FS */
 485         at91_set_A_periph(AT91_PIN_PD2, 0);     /* AC97CK */
 486         at91_set_A_periph(AT91_PIN_PD3, 0);     /* AC97TX */
 487         at91_set_A_periph(AT91_PIN_PD4, 0);     /* AC97RX */
 488
 489         /* reset */
 490         if (data->reset_pin)
 491                 at91_set_gpio_output(data->reset_pin, 0);
 492
 493         ac97_data = *data;
 494         platform_device_register(&at91sam9rl_ac97_device);
 495 }
 496 #else
 497 void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 498 #endif
 499
 500
 501 /* --------------------------------------------------------------------
 502  *  LCD Controller
 503  * -------------------------------------------------------------------- */
 504
 505 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 506 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
 507 static struct atmel_lcdfb_info lcdc_data;
 508
 509 static struct resource lcdc_resources[] = {
 510         [0] = {
 511                 .start  = AT91SAM9RL_LCDC_BASE,
 512                 .end    = AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
 513                 .flags  = IORESOURCE_MEM,
 514         },
 515         [1] = {
 516                 .start  = AT91SAM9RL_ID_LCDC,
 517                 .end    = AT91SAM9RL_ID_LCDC,
 518                 .flags  = IORESOURCE_IRQ,
 519         },
 520 };
 521
 522 static struct platform_device at91_lcdc_device = {
 523         .name           = "atmel_lcdfb",
 524         .id             = 0,
 525         .dev            = {
 526                                 .dma_mask               = &lcdc_dmamask,
 527                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 528                                 .platform_data          = &lcdc_data,
 529         },
 530         .resource       = lcdc_resources,
 531         .num_resources  = ARRAY_SIZE(lcdc_resources),
 532 };
 533
 534 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 535 {
 536         if (!data) {
 537                 return;
 538         }
 539
 540         at91_set_B_periph(AT91_PIN_PC1, 0);     /* LCDPWR */
 541         at91_set_A_periph(AT91_PIN_PC5, 0);     /* LCDHSYNC */
 542         at91_set_A_periph(AT91_PIN_PC6, 0);     /* LCDDOTCK */
 543         at91_set_A_periph(AT91_PIN_PC7, 0);     /* LCDDEN */
 544         at91_set_A_periph(AT91_PIN_PC3, 0);     /* LCDCC */
 545         at91_set_B_periph(AT91_PIN_PC9, 0);     /* LCDD3 */
 546         at91_set_B_periph(AT91_PIN_PC10, 0);    /* LCDD4 */
 547         at91_set_B_periph(AT91_PIN_PC11, 0);    /* LCDD5 */
 548         at91_set_B_periph(AT91_PIN_PC12, 0);    /* LCDD6 */
 549         at91_set_B_periph(AT91_PIN_PC13, 0);    /* LCDD7 */
 550         at91_set_B_periph(AT91_PIN_PC15, 0);    /* LCDD11 */
 551         at91_set_B_periph(AT91_PIN_PC16, 0);    /* LCDD12 */
 552         at91_set_B_periph(AT91_PIN_PC17, 0);    /* LCDD13 */
 553         at91_set_B_periph(AT91_PIN_PC18, 0);    /* LCDD14 */
 554         at91_set_B_periph(AT91_PIN_PC19, 0);    /* LCDD15 */
 555         at91_set_B_periph(AT91_PIN_PC20, 0);    /* LCDD18 */
 556         at91_set_B_periph(AT91_PIN_PC21, 0);    /* LCDD19 */
 557         at91_set_B_periph(AT91_PIN_PC22, 0);    /* LCDD20 */
 558         at91_set_B_periph(AT91_PIN_PC23, 0);    /* LCDD21 */
 559         at91_set_B_periph(AT91_PIN_PC24, 0);    /* LCDD22 */
 560         at91_set_B_periph(AT91_PIN_PC25, 0);    /* LCDD23 */
 561
 562         lcdc_data = *data;
 563         platform_device_register(&at91_lcdc_device);
 564 }
 565 #else
 566 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 567 #endif
 568
 569
 570 /* --------------------------------------------------------------------
 571  *  Timer/Counter block
 572  * -------------------------------------------------------------------- */
 573
 574 #ifdef CONFIG_ATMEL_TCLIB
 575
 576 static struct resource tcb_resources[] = {
 577         [0] = {
 578                 .start  = AT91SAM9RL_BASE_TCB0,
 579                 .end    = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
 580                 .flags  = IORESOURCE_MEM,
 581         },
 582         [1] = {
 583                 .start  = AT91SAM9RL_ID_TC0,
 584                 .end    = AT91SAM9RL_ID_TC0,
 585                 .flags  = IORESOURCE_IRQ,
 586         },
 587         [2] = {
 588                 .start  = AT91SAM9RL_ID_TC1,
 589                 .end    = AT91SAM9RL_ID_TC1,
 590                 .flags  = IORESOURCE_IRQ,
 591         },
 592         [3] = {
 593                 .start  = AT91SAM9RL_ID_TC2,
 594                 .end    = AT91SAM9RL_ID_TC2,
 595                 .flags  = IORESOURCE_IRQ,
 596         },
 597 };
 598
 599 static struct platform_device at91sam9rl_tcb_device = {
 600         .name           = "atmel_tcb",
 601         .id             = 0,
 602         .resource       = tcb_resources,
 603         .num_resources  = ARRAY_SIZE(tcb_resources),
 604 };
 605
 606 static void __init at91_add_device_tc(void)
 607 {
 608         /* this chip has a separate clock and irq for each TC channel */
 609         at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
 610         at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
 611         at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
 612         platform_device_register(&at91sam9rl_tcb_device);
 613 }
 614 #else
 615 static void __init at91_add_device_tc(void) { }
 616 #endif
 617
 618
 619 /* --------------------------------------------------------------------
 620  *  Touchscreen
 621  * -------------------------------------------------------------------- */
 622
 623 #if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
 624 static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
 625
 626 static struct resource tsadcc_resources[] = {
 627         [0] = {
 628                 .start  = AT91SAM9RL_BASE_TSC,
 629                 .end    = AT91SAM9RL_BASE_TSC + SZ_16K - 1,
 630                 .flags  = IORESOURCE_MEM,
 631         },
 632         [1] = {
 633                 .start  = AT91SAM9RL_ID_TSC,
 634                 .end    = AT91SAM9RL_ID_TSC,
 635                 .flags  = IORESOURCE_IRQ,
 636         }
 637 };
 638
 639 static struct platform_device at91sam9rl_tsadcc_device = {
 640         .name           = "atmel_tsadcc",
 641         .id             = -1,
 642         .dev            = {
 643                                 .dma_mask               = &tsadcc_dmamask,
 644                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 645         },
 646         .resource       = tsadcc_resources,
 647         .num_resources  = ARRAY_SIZE(tsadcc_resources),
 648 };
 649
 650 void __init at91_add_device_tsadcc(void)
 651 {
 652         at91_set_A_periph(AT91_PIN_PA17, 0);    /* AD0_XR */
 653         at91_set_A_periph(AT91_PIN_PA18, 0);    /* AD1_XL */
 654         at91_set_A_periph(AT91_PIN_PA19, 0);    /* AD2_YT */
 655         at91_set_A_periph(AT91_PIN_PA20, 0);    /* AD3_TB */
 656
 657         platform_device_register(&at91sam9rl_tsadcc_device);
 658 }
 659 #else
 660 void __init at91_add_device_tsadcc(void) {}
 661 #endif
 662
 663
 664 /* --------------------------------------------------------------------
 665  *  RTC
 666  * -------------------------------------------------------------------- */
 667
 668 #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
 669 static struct platform_device at91sam9rl_rtc_device = {
 670         .name           = "at91_rtc",
 671         .id             = -1,
 672         .num_resources  = 0,
 673 };
 674
 675 static void __init at91_add_device_rtc(void)
 676 {
 677         platform_device_register(&at91sam9rl_rtc_device);
 678 }
 679 #else
 680 static void __init at91_add_device_rtc(void) {}
 681 #endif
 682
 683
 684 /* --------------------------------------------------------------------
 685  *  RTT
 686  * -------------------------------------------------------------------- */
 687
 688 static struct resource rtt_resources[] = {
 689         {
 690                 .start  = AT91_BASE_SYS + AT91_RTT,
 691                 .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
 692                 .flags  = IORESOURCE_MEM,
 693         }
 694 };
 695
 696 static struct platform_device at91sam9rl_rtt_device = {
 697         .name           = "at91_rtt",
 698         .id             = 0,
 699         .resource       = rtt_resources,
 700         .num_resources  = ARRAY_SIZE(rtt_resources),
 701 };
 702
 703 static void __init at91_add_device_rtt(void)
 704 {
 705         platform_device_register(&at91sam9rl_rtt_device);
 706 }
 707
 708
 709 /* --------------------------------------------------------------------
 710  *  Watchdog
 711  * -------------------------------------------------------------------- */
 712
 713 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 714 static struct platform_device at91sam9rl_wdt_device = {
 715         .name           = "at91_wdt",
 716         .id             = -1,
 717         .num_resources  = 0,
 718 };
 719
 720 static void __init at91_add_device_watchdog(void)
 721 {
 722         platform_device_register(&at91sam9rl_wdt_device);
 723 }
 724 #else
 725 static void __init at91_add_device_watchdog(void) {}
 726 #endif
 727
 728
 729 /* --------------------------------------------------------------------
 730  *  PWM
 731  * --------------------------------------------------------------------*/
 732
 733 #if defined(CONFIG_ATMEL_PWM)
 734 static u32 pwm_mask;
 735
 736 static struct resource pwm_resources[] = {
 737         [0] = {
 738                 .start  = AT91SAM9RL_BASE_PWMC,
 739                 .end    = AT91SAM9RL_BASE_PWMC + SZ_16K - 1,
 740                 .flags  = IORESOURCE_MEM,
 741         },
 742         [1] = {
 743                 .start  = AT91SAM9RL_ID_PWMC,
 744                 .end    = AT91SAM9RL_ID_PWMC,
 745                 .flags  = IORESOURCE_IRQ,
 746         },
 747 };
 748
 749 static struct platform_device at91sam9rl_pwm0_device = {
 750         .name   = "atmel_pwm",
 751         .id     = -1,
 752         .dev    = {
 753                 .platform_data          = &pwm_mask,
 754         },
 755         .resource       = pwm_resources,
 756         .num_resources  = ARRAY_SIZE(pwm_resources),
 757 };
 758
 759 void __init at91_add_device_pwm(u32 mask)
 760 {
 761         if (mask & (1 << AT91_PWM0))
 762                 at91_set_B_periph(AT91_PIN_PB8, 1);     /* enable PWM0 */
 763
 764         if (mask & (1 << AT91_PWM1))
 765                 at91_set_B_periph(AT91_PIN_PB9, 1);     /* enable PWM1 */
 766
 767         if (mask & (1 << AT91_PWM2))
 768                 at91_set_B_periph(AT91_PIN_PD5, 1);     /* enable PWM2 */
 769
 770         if (mask & (1 << AT91_PWM3))
 771                 at91_set_B_periph(AT91_PIN_PD8, 1);     /* enable PWM3 */
 772
 773         pwm_mask = mask;
 774
 775         platform_device_register(&at91sam9rl_pwm0_device);
 776 }
 777 #else
 778 void __init at91_add_device_pwm(u32 mask) {}
 779 #endif
 780
 781
 782 /* --------------------------------------------------------------------
 783  *  SSC -- Synchronous Serial Controller
 784  * -------------------------------------------------------------------- */
 785
 786 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
 787 static u64 ssc0_dmamask = DMA_BIT_MASK(32);
 788
 789 static struct resource ssc0_resources[] = {
 790         [0] = {
 791                 .start  = AT91SAM9RL_BASE_SSC0,
 792                 .end    = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
 793                 .flags  = IORESOURCE_MEM,
 794         },
 795         [1] = {
 796                 .start  = AT91SAM9RL_ID_SSC0,
 797                 .end    = AT91SAM9RL_ID_SSC0,
 798                 .flags  = IORESOURCE_IRQ,
 799         },
 800 };
 801
 802 static struct platform_device at91sam9rl_ssc0_device = {
 803         .name   = "ssc",
 804         .id     = 0,
 805         .dev    = {
 806                 .dma_mask               = &ssc0_dmamask,
 807                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 808         },
 809         .resource       = ssc0_resources,
 810         .num_resources  = ARRAY_SIZE(ssc0_resources),
 811 };
 812
 813 static inline void configure_ssc0_pins(unsigned pins)
 814 {
 815         if (pins & ATMEL_SSC_TF)
 816                 at91_set_A_periph(AT91_PIN_PC0, 1);
 817         if (pins & ATMEL_SSC_TK)
 818                 at91_set_A_periph(AT91_PIN_PC1, 1);
 819         if (pins & ATMEL_SSC_TD)
 820                 at91_set_A_periph(AT91_PIN_PA15, 1);
 821         if (pins & ATMEL_SSC_RD)
 822                 at91_set_A_periph(AT91_PIN_PA16, 1);
 823         if (pins & ATMEL_SSC_RK)
 824                 at91_set_B_periph(AT91_PIN_PA10, 1);
 825         if (pins & ATMEL_SSC_RF)
 826                 at91_set_B_periph(AT91_PIN_PA22, 1);
 827 }
 828
 829 static u64 ssc1_dmamask = DMA_BIT_MASK(32);
 830
 831 static struct resource ssc1_resources[] = {
 832         [0] = {
 833                 .start  = AT91SAM9RL_BASE_SSC1,
 834                 .end    = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
 835                 .flags  = IORESOURCE_MEM,
 836         },
 837         [1] = {
 838                 .start  = AT91SAM9RL_ID_SSC1,
 839                 .end    = AT91SAM9RL_ID_SSC1,
 840                 .flags  = IORESOURCE_IRQ,
 841         },
 842 };
 843
 844 static struct platform_device at91sam9rl_ssc1_device = {
 845         .name   = "ssc",
 846         .id     = 1,
 847         .dev    = {
 848                 .dma_mask               = &ssc1_dmamask,
 849                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 850         },
 851         .resource       = ssc1_resources,
 852         .num_resources  = ARRAY_SIZE(ssc1_resources),
 853 };
 854
 855 static inline void configure_ssc1_pins(unsigned pins)
 856 {
 857         if (pins & ATMEL_SSC_TF)
 858                 at91_set_B_periph(AT91_PIN_PA29, 1);
 859         if (pins & ATMEL_SSC_TK)
 860                 at91_set_B_periph(AT91_PIN_PA30, 1);
 861         if (pins & ATMEL_SSC_TD)
 862                 at91_set_B_periph(AT91_PIN_PA13, 1);
 863         if (pins & ATMEL_SSC_RD)
 864                 at91_set_B_periph(AT91_PIN_PA14, 1);
 865         if (pins & ATMEL_SSC_RK)
 866                 at91_set_B_periph(AT91_PIN_PA9, 1);
 867         if (pins & ATMEL_SSC_RF)
 868                 at91_set_B_periph(AT91_PIN_PA8, 1);
 869 }
 870
 871 /*
 872  * SSC controllers are accessed through library code, instead of any
 873  * kind of all-singing/all-dancing driver.  For example one could be
 874  * used by a particular I2S audio codec's driver, while another one
 875  * on the same system might be used by a custom data capture driver.
 876  */
 877 void __init at91_add_device_ssc(unsigned id, unsigned pins)
 878 {
 879         struct platform_device *pdev;
 880
 881         /*
 882          * NOTE: caller is responsible for passing information matching
 883          * "pins" to whatever will be using each particular controller.
 884          */
 885         switch (id) {
 886         case AT91SAM9RL_ID_SSC0:
 887                 pdev = &at91sam9rl_ssc0_device;
 888                 configure_ssc0_pins(pins);
 889                 at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 890                 break;
 891         case AT91SAM9RL_ID_SSC1:
 892                 pdev = &at91sam9rl_ssc1_device;
 893                 configure_ssc1_pins(pins);
 894                 at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 895                 break;
 896         default:
 897                 return;
 898         }
 899
 900         platform_device_register(pdev);
 901 }
 902
 903 #else
 904 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 905 #endif
 906
 907
 908 /* --------------------------------------------------------------------
 909  *  UART
 910  * -------------------------------------------------------------------- */
 911
 912 #if defined(CONFIG_SERIAL_ATMEL)
 913 static struct resource dbgu_resources[] = {
 914         [0] = {
 915                 .start  = AT91_VA_BASE_SYS + AT91_DBGU,
 916                 .end    = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 917                 .flags  = IORESOURCE_MEM,
 918         },
 919         [1] = {
 920                 .start  = AT91_ID_SYS,
 921                 .end    = AT91_ID_SYS,
 922                 .flags  = IORESOURCE_IRQ,
 923         },
 924 };
 925
 926 static struct atmel_uart_data dbgu_data = {
 927         .use_dma_tx     = 0,
 928         .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
 929         .regs           = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 930 };
 931
 932 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
 933
 934 static struct platform_device at91sam9rl_dbgu_device = {
 935         .name           = "atmel_usart",
 936         .id             = 0,
 937         .dev            = {
 938                                 .dma_mask               = &dbgu_dmamask,
 939                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 940                                 .platform_data          = &dbgu_data,
 941         },
 942         .resource       = dbgu_resources,
 943         .num_resources  = ARRAY_SIZE(dbgu_resources),
 944 };
 945
 946 static inline void configure_dbgu_pins(void)
 947 {
 948         at91_set_A_periph(AT91_PIN_PA21, 0);            /* DRXD */
 949         at91_set_A_periph(AT91_PIN_PA22, 1);            /* DTXD */
 950 }
 951
 952 static struct resource uart0_resources[] = {
 953         [0] = {
 954                 .start  = AT91SAM9RL_BASE_US0,
 955                 .end    = AT91SAM9RL_BASE_US0 + SZ_16K - 1,
 956                 .flags  = IORESOURCE_MEM,
 957         },
 958         [1] = {
 959                 .start  = AT91SAM9RL_ID_US0,
 960                 .end    = AT91SAM9RL_ID_US0,
 961                 .flags  = IORESOURCE_IRQ,
 962         },
 963 };
 964
 965 static struct atmel_uart_data uart0_data = {
 966         .use_dma_tx     = 1,
 967         .use_dma_rx     = 1,
 968 };
 969
 970 static u64 uart0_dmamask = DMA_BIT_MASK(32);
 971
 972 static struct platform_device at91sam9rl_uart0_device = {
 973         .name           = "atmel_usart",
 974         .id             = 1,
 975         .dev            = {
 976                                 .dma_mask               = &uart0_dmamask,
 977                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 978                                 .platform_data          = &uart0_data,
 979         },
 980         .resource       = uart0_resources,
 981         .num_resources  = ARRAY_SIZE(uart0_resources),
 982 };
 983
 984 static inline void configure_usart0_pins(unsigned pins)
 985 {
 986         at91_set_A_periph(AT91_PIN_PA6, 1);             /* TXD0 */
 987         at91_set_A_periph(AT91_PIN_PA7, 0);             /* RXD0 */
 988
 989         if (pins & ATMEL_UART_RTS)
 990                 at91_set_A_periph(AT91_PIN_PA9, 0);     /* RTS0 */
 991         if (pins & ATMEL_UART_CTS)
 992                 at91_set_A_periph(AT91_PIN_PA10, 0);    /* CTS0 */
 993         if (pins & ATMEL_UART_DSR)
 994                 at91_set_A_periph(AT91_PIN_PD14, 0);    /* DSR0 */
 995         if (pins & ATMEL_UART_DTR)
 996                 at91_set_A_periph(AT91_PIN_PD15, 0);    /* DTR0 */
 997         if (pins & ATMEL_UART_DCD)
 998                 at91_set_A_periph(AT91_PIN_PD16, 0);    /* DCD0 */
 999         if (pins & ATMEL_UART_RI)
1000                 at91_set_A_periph(AT91_PIN_PD17, 0);    /* RI0 */
1001 }
1002
1003 static struct resource uart1_resources[] = {
1004         [0] = {
1005                 .start  = AT91SAM9RL_BASE_US1,
1006                 .end    = AT91SAM9RL_BASE_US1 + SZ_16K - 1,
1007                 .flags  = IORESOURCE_MEM,
1008         },
1009         [1] = {
1010                 .start  = AT91SAM9RL_ID_US1,
1011                 .end    = AT91SAM9RL_ID_US1,
1012                 .flags  = IORESOURCE_IRQ,
1013         },
1014 };
1015
1016 static struct atmel_uart_data uart1_data = {
1017         .use_dma_tx     = 1,
1018         .use_dma_rx     = 1,
1019 };
1020
1021 static u64 uart1_dmamask = DMA_BIT_MASK(32);
1022
1023 static struct platform_device at91sam9rl_uart1_device = {
1024         .name           = "atmel_usart",
1025         .id             = 2,
1026         .dev            = {
1027                                 .dma_mask               = &uart1_dmamask,
1028                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1029                                 .platform_data          = &uart1_data,
1030         },
1031         .resource       = uart1_resources,
1032         .num_resources  = ARRAY_SIZE(uart1_resources),
1033 };
1034
1035 static inline void configure_usart1_pins(unsigned pins)
1036 {
1037         at91_set_A_periph(AT91_PIN_PA11, 1);            /* TXD1 */
1038         at91_set_A_periph(AT91_PIN_PA12, 0);            /* RXD1 */
1039
1040         if (pins & ATMEL_UART_RTS)
1041                 at91_set_B_periph(AT91_PIN_PA18, 0);    /* RTS1 */
1042         if (pins & ATMEL_UART_CTS)
1043                 at91_set_B_periph(AT91_PIN_PA19, 0);    /* CTS1 */
1044 }
1045
1046 static struct resource uart2_resources[] = {
1047         [0] = {
1048                 .start  = AT91SAM9RL_BASE_US2,
1049                 .end    = AT91SAM9RL_BASE_US2 + SZ_16K - 1,
1050                 .flags  = IORESOURCE_MEM,
1051         },
1052         [1] = {
1053                 .start  = AT91SAM9RL_ID_US2,
1054                 .end    = AT91SAM9RL_ID_US2,
1055                 .flags  = IORESOURCE_IRQ,
1056         },
1057 };
1058
1059 static struct atmel_uart_data uart2_data = {
1060         .use_dma_tx     = 1,
1061         .use_dma_rx     = 1,
1062 };
1063
1064 static u64 uart2_dmamask = DMA_BIT_MASK(32);
1065
1066 static struct platform_device at91sam9rl_uart2_device = {
1067         .name           = "atmel_usart",
1068         .id             = 3,
1069         .dev            = {
1070                                 .dma_mask               = &uart2_dmamask,
1071                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1072                                 .platform_data          = &uart2_data,
1073         },
1074         .resource       = uart2_resources,
1075         .num_resources  = ARRAY_SIZE(uart2_resources),
1076 };
1077
1078 static inline void configure_usart2_pins(unsigned pins)
1079 {
1080         at91_set_A_periph(AT91_PIN_PA13, 1);            /* TXD2 */
1081         at91_set_A_periph(AT91_PIN_PA14, 0);            /* RXD2 */
1082
1083         if (pins & ATMEL_UART_RTS)
1084                 at91_set_A_periph(AT91_PIN_PA29, 0);    /* RTS2 */
1085         if (pins & ATMEL_UART_CTS)
1086                 at91_set_A_periph(AT91_PIN_PA30, 0);    /* CTS2 */
1087 }
1088
1089 static struct resource uart3_resources[] = {
1090         [0] = {
1091                 .start  = AT91SAM9RL_BASE_US3,
1092                 .end    = AT91SAM9RL_BASE_US3 + SZ_16K - 1,
1093                 .flags  = IORESOURCE_MEM,
1094         },
1095         [1] = {
1096                 .start  = AT91SAM9RL_ID_US3,
1097                 .end    = AT91SAM9RL_ID_US3,
1098                 .flags  = IORESOURCE_IRQ,
1099         },
1100 };
1101
1102 static struct atmel_uart_data uart3_data = {
1103         .use_dma_tx     = 1,
1104         .use_dma_rx     = 1,
1105 };
1106
1107 static u64 uart3_dmamask = DMA_BIT_MASK(32);
1108
1109 static struct platform_device at91sam9rl_uart3_device = {
1110         .name           = "atmel_usart",
1111         .id             = 4,
1112         .dev            = {
1113                                 .dma_mask               = &uart3_dmamask,
1114                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1115                                 .platform_data          = &uart3_data,
1116         },
1117         .resource       = uart3_resources,
1118         .num_resources  = ARRAY_SIZE(uart3_resources),
1119 };
1120
1121 static inline void configure_usart3_pins(unsigned pins)
1122 {
1123         at91_set_A_periph(AT91_PIN_PB0, 1);             /* TXD3 */
1124         at91_set_A_periph(AT91_PIN_PB1, 0);             /* RXD3 */
1125
1126         if (pins & ATMEL_UART_RTS)
1127                 at91_set_B_periph(AT91_PIN_PD4, 0);     /* RTS3 */
1128         if (pins & ATMEL_UART_CTS)
1129                 at91_set_B_periph(AT91_PIN_PD3, 0);     /* CTS3 */
1130 }
1131
1132 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
1133 struct platform_device *atmel_default_console_device;   /* the serial console device */
1134
1135 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1136 {
1137         struct platform_device *pdev;
1138
1139         switch (id) {
1140                 case 0:         /* DBGU */
1141                         pdev = &at91sam9rl_dbgu_device;
1142                         configure_dbgu_pins();
1143                         at91_clock_associate("mck", &pdev->dev, "usart");
1144                         break;
1145                 case AT91SAM9RL_ID_US0:
1146                         pdev = &at91sam9rl_uart0_device;
1147                         configure_usart0_pins(pins);
1148                         at91_clock_associate("usart0_clk", &pdev->dev, "usart");
1149                         break;
1150                 case AT91SAM9RL_ID_US1:
1151                         pdev = &at91sam9rl_uart1_device;
1152                         configure_usart1_pins(pins);
1153                         at91_clock_associate("usart1_clk", &pdev->dev, "usart");
1154                         break;
1155                 case AT91SAM9RL_ID_US2:
1156                         pdev = &at91sam9rl_uart2_device;
1157                         configure_usart2_pins(pins);
1158                         at91_clock_associate("usart2_clk", &pdev->dev, "usart");
1159                         break;
1160                 case AT91SAM9RL_ID_US3:
1161                         pdev = &at91sam9rl_uart3_device;
1162                         configure_usart3_pins(pins);
1163                         at91_clock_associate("usart3_clk", &pdev->dev, "usart");
1164                         break;
1165                 default:
1166                         return;
1167         }
1168         pdev->id = portnr;              /* update to mapped ID */
1169
1170         if (portnr < ATMEL_MAX_UART)
1171                 at91_uarts[portnr] = pdev;
1172 }
1173
1174 void __init at91_set_serial_console(unsigned portnr)
1175 {
1176         if (portnr < ATMEL_MAX_UART)
1177                 atmel_default_console_device = at91_uarts[portnr];
1178 }
1179
1180 void __init at91_add_device_serial(void)
1181 {
1182         int i;
1183
1184         for (i = 0; i < ATMEL_MAX_UART; i++) {
1185                 if (at91_uarts[i])
1186                         platform_device_register(at91_uarts[i]);
1187         }
1188
1189         if (!atmel_default_console_device)
1190                 printk(KERN_INFO "AT91: No default serial console defined.\n");
1191 }
1192 #else
1193 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1194 void __init at91_set_serial_console(unsigned portnr) {}
1195 void __init at91_add_device_serial(void) {}
1196 #endif
1197
1198
1199 /* -------------------------------------------------------------------- */
1200
1201 /*
1202  * These devices are always present and don't need any board-specific
1203  * setup.
1204  */
1205 static int __init at91_add_standard_devices(void)
1206 {
1207         at91_add_device_hdmac();
1208         at91_add_device_rtc();
1209         at91_add_device_rtt();
1210         at91_add_device_watchdog();
1211         at91_add_device_tc();
1212         return 0;
1213 }
1214
1215 arch_initcall(at91_add_standard_devices);