9 years agoscore: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:46 +0000]
score: Use common threadinfo allocator

No point in using kmalloc for allocating 2 pages.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Lennox Wu <lennox.wu@gmail.com>
Link: http://lkml.kernel.org/r/20120505150142.123383955@linutronix.de

9 years agosh-use-common-threadinfo-allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:46 +0000]
sh-use-common-threadinfo-allocator

The core now has a threadinfo allocator which uses a kmemcache when
THREAD_SIZE < PAGE_SIZE.

Deal with the xstate cleanup in the new arch_release_task_struct()
function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/20120505150142.189348931@linutronix.de

9 years agomn10300: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:45 +0000]
mn10300: Use common threadinfo allocator

Let the core code allocate and handle the kgdb cleanup with the
arch_release_thread_info() function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120505150141.996582377@linutronix.de

9 years agopowerpc: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:45 +0000]
powerpc: Use common threadinfo allocator

The core now has a threadinfo allocator which uses a kmemcache when
THREAD_SIZE < PAGE_SIZE.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: http://lkml.kernel.org/r/20120505150142.059161130@linutronix.de

9 years agomips: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:44 +0000]
mips: Use common threadinfo allocator

No point in using kmalloc for allocating 0, 1 resp. 2 pages for
threadinfo.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/20120505150141.936950979@linutronix.de

9 years agohexagon: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:44 +0000]
hexagon: Use common threadinfo allocator

The core now has a threadinfo allocator which uses a kmemcache when
THREAD_SIZE < PAGE_SIZE.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Kuo <rkuo@codeaurora.org>
Link: http://lkml.kernel.org/r/20120505150141.812612113@linutronix.de

9 years agom32r: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:44 +0000]
m32r: Use common threadinfo allocator

No reason why m32r needs to use kmalloc to allocate 2 pages instead of
using the core allocator.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Link: http://lkml.kernel.org/r/20120505150141.875430830@linutronix.de

9 years agofrv: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:43 +0000]
frv: Use common threadinfo allocator

The core now has a threadinfo allocator which uses a kmemcache when
THREAD_SIZE < PAGE_SIZE.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120505150141.751600045@linutronix.de

9 years agocris: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:43 +0000]
cris: Use common threadinfo allocator

There is no functional difference. __get_free_pages() ends up calling
alloc_pages_node().

This also allocates only one page which matches THREAD_SIZE instead of
an extra page for nothing.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Link: http://lkml.kernel.org/r/20120505150141.681236240@linutronix.de

9 years agox86: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:42 +0000]
x86: Use common threadinfo allocator

The only difference is the free_thread_info function, which frees
xstate.

Use the new arch_release_task_struct() function instead and switch
over to the core allocator.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120505150141.559556763@linutronix.de
Cc: x86@kernel.org

9 years agoc6x: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:42 +0000]
c6x: Use common threadinfo allocator

There is no functional difference. __get_free_pages() ends up calling
alloc_pages_node().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Salter <msalter@redhat.com>
Link: http://lkml.kernel.org/r/20120505150141.621728944@linutronix.de

9 years agofork: Provide kmemcache based thread_info allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:41 +0000]
fork: Provide kmemcache based thread_info allocator

Several architectures have their own kmemcache based thread allocator
because THREAD_SIZE is smaller than PAGE_SIZE. Add it to the core code
conditionally on THREAD_SIZE < PAGE_SIZE so the private copies can go.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120505150141.491002124@linutronix.de

9 years agoMerge branch 'smp/threadalloc' into smp/hotplug
Thomas Gleixner [Tue, 8 May 2012 12:07:48 +0000]
Merge branch 'smp/threadalloc' into smp/hotplug

Reason: Pull in the separate branch which was created so arch/tile can
base further work on it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

9 years agotile: Use common threadinfo allocator
Thomas Gleixner [Sat, 5 May 2012 15:05:47 +0000]
tile: Use common threadinfo allocator

Use the core allocator and deal with the extra cleanup in
arch_release_thread_info().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20120505150142.311126440@linutronix.de

9 years agofork: Provide weak arch_release_[task_struct|thread_info] functions
Thomas Gleixner [Sat, 5 May 2012 15:05:41 +0000]
fork: Provide weak arch_release_[task_struct|thread_info] functions

These functions allow us to move most of the duplicated thread_info
allocators to the core code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120505150141.366461660@linutronix.de

9 years agofork: Move thread info gfp flags to header
Thomas Gleixner [Sat, 5 May 2012 15:05:41 +0000]
fork: Move thread info gfp flags to header

These flags can be useful for extra allocations outside of the core
code.

Add __GFP_NOTRACK to them, so the archs which have kmemcheck do
not have to provide extra allocators just for that reason.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120505150141.428211694@linutronix.de

9 years agofork: Remove the weak insanity
Thomas Gleixner [Sat, 5 May 2012 15:05:40 +0000]
fork: Remove the weak insanity

We error out when compiling with gcc4.1.[01] as it miscompiles
__weak. The workaround with magic defines is not longer
necessary. Make it __weak again.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120505150141.306358267@linutronix.de

9 years agosh: Remove cpu_idle_wait()
Thomas Gleixner [Mon, 7 May 2012 17:59:51 +0000]
sh: Remove cpu_idle_wait()

cpuidle uses generic kick_all_cpus_sync() now. Remove the unused code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/20120507175652.461648208@linutronix.de

9 years agopowerpc: Remove unused cpu_idle_wait()
Thomas Gleixner [Mon, 7 May 2012 17:59:50 +0000]
powerpc: Remove unused cpu_idle_wait()

cpuidle uses a generic function now. Remove the cruft.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: http://lkml.kernel.org/r/20120507175652.330322737@linutronix.de

9 years agoia64: Remove unused cpu_idle_wait()
Thomas Gleixner [Mon, 7 May 2012 17:59:50 +0000]
ia64: Remove unused cpu_idle_wait()

IA64 does not set CONFIG_ARCH_HAVE_IDLE_WAIT and cpuidle uses a
generic function now. Remove the unused code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20120507175652.392394511@linutronix.de

9 years agoarm: Remove unused cpu_idle_wait()
Thomas Gleixner [Mon, 7 May 2012 17:59:49 +0000]
arm: Remove unused cpu_idle_wait()

cpuidle uses a generic function now. Remove the unused code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/20120507175652.260797846@linutronix.de

9 years agox86: Use kick_all_cpus_sync()
Thomas Gleixner [Mon, 7 May 2012 17:59:49 +0000]
x86: Use kick_all_cpus_sync()

Use kick_all_cpus_sync() and remove cpu_idle_wait().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120507175652.190382227@linutronix.de
Cc: x86@kernel.org

9 years agocpuidle: Use kick_all_cpus_sync()
Thomas Gleixner [Mon, 7 May 2012 17:59:48 +0000]
cpuidle: Use kick_all_cpus_sync()

kick_all_cpus_sync() is the core implementation of cpu_idle_wait()
which is copied all over the arch code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120507175652.119842173@linutronix.de

9 years agosmp: Implement kick_all_cpus_sync()
Thomas Gleixner [Mon, 7 May 2012 17:59:48 +0000]
smp: Implement kick_all_cpus_sync()

Will replace the misnomed cpu_idle_wait() function which is copied a
gazillion times all over arch/*

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120507175652.049316594@linutronix.de

9 years agopowerpc: Fix broken cpu_idle_wait() implementation
Thomas Gleixner [Mon, 7 May 2012 17:59:47 +0000]
powerpc: Fix broken cpu_idle_wait() implementation

commit 771dae818 (powerpc/cpuidle: Add cpu_idle_wait() to allow
switching of idle routines) implemented cpu_idle_wait() for powerpc.

The changelog says:
 "The equivalent routine for x86 is in arch/x86/kernel/process.c
  but the powerpc implementation is different.":

Unfortunately the changelog is completely useless as it does not tell
_WHY_ it is different.

Aside of being different the implementation is patently wrong.

The rescheduling IPI is async. That means that there is no guarantee,
that the other cores have executed the IPI when cpu_idle_wait()
returns. But that's the whole purpose of this function: to guarantee
that no CPU uses the old idle handler anymore.

Use the smp_functional_call() based implementation, which fulfils the
requirements.

[ This code is going to replaced by a core version to remove all the
  pointless copies in arch/*, but this one should go to stable ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cc: Trinabh Gupta <g.trinabh@gmail.com>
Cc: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: http://lkml.kernel.org/r/20120507175651.980164748@linutronix.de
Cc: stable@vger.kernel.org

9 years agomips: Use PAGE_SIZE for INIT_TASK_DATA alignment again
Thomas Gleixner [Mon, 7 May 2012 09:39:11 +0000]
mips: Use PAGE_SIZE for INIT_TASK_DATA alignment again

957b369c (mips: Use generic init_task) optimistically replaced the
PAGE_SIZE INIT_TASK_DATA alignment with THREAD_SIZE, but THREAD_SIZE
is not defined, so the linking stage breaks.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

9 years agoparisc: Fix init_task fallout
Thomas Gleixner [Mon, 7 May 2012 09:28:13 +0000]
parisc: Fix init_task fallout

Forgot to remove the objects from the Makefiles.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

9 years agoinit_task: Replace CONFIG_HAVE_GENERIC_INIT_TASK
Thomas Gleixner [Thu, 3 May 2012 09:03:02 +0000]
init_task: Replace CONFIG_HAVE_GENERIC_INIT_TASK

Now that all archs except ia64 are converted, replace the config and
let the ia64 select CONFIG_ARCH_INIT_TASK

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120503085035.867948914@linutronix.de

9 years agoxtensa: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:03:01 +0000]
xtensa: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Zankel <chris@zankel.net>
Link: http://lkml.kernel.org/r/20120503085035.804059531@linutronix.de

9 years agox86: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:03:01 +0000]
x86: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120503085035.739963562@linutronix.de
Cc: x86@kernel.org

9 years agoum: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:03:00 +0000]
um: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20120503085035.592937512@linutronix.de

9 years agounicore32: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:03:00 +0000]
unicore32: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Link: http://lkml.kernel.org/r/20120503085035.669622065@linutronix.de

9 years agotile: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:59 +0000]
tile: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20120503085035.528129988@linutronix.de

9 years agosparc: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:59 +0000]
sparc: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/20120503085035.463573011@linutronix.de

9 years agosh: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:59 +0000]
sh: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/20120503085035.398257169@linutronix.de

9 years agoscore: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:58 +0000]
score: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Link: http://lkml.kernel.org/r/20120503085035.332320547@linutronix.de

9 years agos390: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:58 +0000]
s390: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/20120503085035.271439530@linutronix.de

9 years agopowerpc: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:57 +0000]
powerpc: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: http://lkml.kernel.org/r/20120503085035.211123184@linutronix.de

9 years agoparisc: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:57 +0000]
parisc: Use generic init_task

Same code, except: The alignment of init_thread_union is handled via
the linker script, so no point to have it with the data structure. The
extra asm(".data") looks like a leftover from an asm to C conversion
and is pointless.

Use the generic version.

Move the page table data to parisc/mm/init.c and get rid of
parisc/../init_task.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Link: http://lkml.kernel.org/r/20120503085035.150896946@linutronix.de

9 years agoopenrisc: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:56 +0000]
openrisc: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonas Bonn <jonas@southpole.se>
Link: http://lkml.kernel.org/r/20120503085035.083343435@linutronix.de

9 years agomn10300: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:56 +0000]
mn10300: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120503085035.011270394@linutronix.de

9 years agomips: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:55 +0000]
mips: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Make the linker script align the task on THREAD_SIZE and not on
PAGE_SIZE, as PAGE_SIZE might be smaller than THREAD_SIZE.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/20120503085034.941344764@linutronix.de

9 years agomicroblaze: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:55 +0000]
microblaze: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michal Simek <monstr@monstr.eu>
Link: http://lkml.kernel.org/r/20120503085034.881532838@linutronix.de

9 years agom68k: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:54 +0000]
m68k: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/20120503085034.816195285@linutronix.de

9 years agom32r: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:54 +0000]
m32r: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Link: http://lkml.kernel.org/r/20120503085034.756332161@linutronix.de

9 years agohexagon: Use generic idle_task
Thomas Gleixner [Thu, 3 May 2012 09:02:54 +0000]
hexagon: Use generic idle_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120503085034.692078846@linutronix.de
Acked-and-tested-by: Richard Kuo <rkuo@codeaurora.org>

9 years agoh8300-use-generic-init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:53 +0000]
h8300-use-generic-init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20120503085034.623666760@linutronix.de

9 years agofrv: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:53 +0000]
frv: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120503085034.546687215@linutronix.de

9 years agocris: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:52 +0000]
cris: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Link: http://lkml.kernel.org/r/20120503085034.475552133@linutronix.de

9 years agoc6x: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:52 +0000]
c6x: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-and-tested-by: Mark Salter <msalter@redhat.com>
Link: http://lkml.kernel.org/r/20120503085034.412398724@linutronix.de

9 years agoblackfin: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:51 +0000]
blackfin: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Link: http://lkml.kernel.org/r/20120503085034.350246420@linutronix.de

9 years agoavr32: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:51 +0000]
avr32: Use generic init_task

Same code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Link: http://lkml.kernel.org/r/20120503085034.281527118@linutronix.de

9 years agoarm: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:50 +0000]
arm: Use generic init_task

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/20120503085034.221811388@linutronix.de

9 years agoalpha: Use generic init_task
Thomas Gleixner [Thu, 3 May 2012 09:02:50 +0000]
alpha: Use generic init_task

Identical code. Use the generic version.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Matt Turner <mattst88@gmail.com>
Link: http://lkml.kernel.org/r/20120503085034.162634519@linutronix.de

9 years agoinit_task: Create generic init_task instance
Thomas Gleixner [Thu, 3 May 2012 09:02:48 +0000]
init_task: Create generic init_task instance

All archs define init_task in the same way (except ia64, but there is
no particular reason why ia64 cannot use the common version). Create a
generic instance so all archs can be converted over.

The config switch is temporary and will be removed when all archs are
converted over.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20120503085034.092585287@linutronix.de

9 years agofrv: Use core allocator for task_struct
Thomas Gleixner [Thu, 3 May 2012 09:02:47 +0000]
frv: Use core allocator for task_struct

There is no point having a copy of the core allocator.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120503085033.967140188@linutronix.de

9 years agofrv: Use correct size for task_struct allocation
Thomas Gleixner [Thu, 3 May 2012 09:02:47 +0000]
frv: Use correct size for task_struct allocation

alloc_task_struct_node() allocates THREAD_SIZE and maintains some
weird refcount in the allocated memory. This never blew up as
task_struct size on 32bit machines was always less than THREAD_SIZE

Allocate just sizeof(struct task_struct) and get rid of the magic
refcounting.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120503085033.898475542@linutronix.de

9 years agosmp: Fix idle_thread_init() inline stub
Thomas Gleixner [Fri, 4 May 2012 10:52:25 +0000]
smp: Fix idle_thread_init() inline stub

idle_thread_init() does not have arguments.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

9 years agoMerge tag 'mfd-for-linus-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 4 May 2012 00:21:05 +0000]
Merge tag 'mfd-for-linus-3.4-rc6' of git://git./linux/kernel/git/sameo/mfd-2.6

Pull second set of MFD fixes from Samuel Ortiz:
 "This time we only have a one liner fixing an omap-usb build error."

* tag 'mfd-for-linus-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Fix build breakage in omap-usb-host.c

9 years agoMerge branch 'efi-vars' from Matthew Garrett
Linus Torvalds [Fri, 4 May 2012 00:19:48 +0000]
Merge branch 'efi-vars' from Matthew Garrett

* efi-vars:
  efivars: Improve variable validation

9 years agoefivars: Improve variable validation
Matthew Garrett [Thu, 3 May 2012 20:50:46 +0000]
efivars: Improve variable validation

Ben Hutchings pointed out that the validation in efivars was inadequate -
most obviously, an entry with size 0 would server as a DoS against the
kernel. Improve this based on his suggestions.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarz...
Linus Torvalds [Fri, 4 May 2012 00:16:52 +0000]
Merge tag 'tag/upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

Pull libata fixes from Jeff Garzik:

1) Fix regression that could cause a misdiagnosis, which in turn could
   lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug
   and suspend/resume is involved.

2) Fix a regression that led to ata%d controller ids being numbered one
   larger than in <= 3.4-rc3 (oh, the horror!).  Controller ids should now be
   as expected.

3) add some DT, PCI id's

4) ata/pata_arasan_cf: minor cpp fixing/cleaning

* tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
  ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  libata: init ata_print_id to 0
  ahci: Detect Marvell 88SE9172 SATA controller
  libata: skip old error history when counting probe trials

9 years agoMerge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux
Linus Torvalds [Fri, 4 May 2012 00:15:47 +0000]
Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux

Pull i2c embedded fixes from Wolfram Sang:
 "Here are some typical i2c driver bugfixes for 3.4.  Missed clock
  handling, improper timeout fixes, hardware wrokarounds...  All
  patches have been in linux-next for a few days, too."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: mxs: disable QUEUE when sending is done
  i2c: mxs: handle spurious interrupt
  i2c-eg20t: Modify MODULE_AUTHOR's email address
  i2c-eg20t: change timeout value 50msec to 1000msec
  i2c: tegra: Add delay before resetting the controller after NACK
  i2c: pnx: Disable clk in suspend

9 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 4 May 2012 00:14:55 +0000]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Just some regression fixes from Ben along with a variable that gcc
  failed to spot is uninitialised."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  nouveau: initialise has_optimus variable.
  drm/nv10/gpio: fix thinko in mask for gpio lines 2-9
  nvc0/fb: shut up PMFB interrupt after the first occurrence
  drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac
  drm/nouveau/bios: fix regression on some nv4x board

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 4 May 2012 00:10:39 +0000]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Transfer padding was wrong for full-speed USB in ASIX driver, fix
    from Ingo van Lil.

 2) Propagate the negative packet offset fix into the PowerPC BPF JIT.
    From Jan Seiffert.

 3) dl2k driver's private ioctls were letting unprivileged tasks make
    MII writes and other ugly bits like that.  Fix from Jeff Mahoney.

 4) Fix TX VLAN and RX packet drops in ucc_geth, from Joakim Tjernlund.

 5) OOPS and network namespace fixes in IPVS from Hans Schillstrom and
    Julian Anastasov.

 6) Fix races and sleeping in locked context bugs in drop_monitor, from
    Neil Horman.

 7) Fix link status indication in smsc95xx driver, from Paolo Pisati.

 8) Fix bridge netfilter OOPS, from Peter Huang.

 9) L2TP sendmsg can return on error conditions with the socket lock
    held, oops.  Fix from Sasha Levin.

10) udp_diag should return meaningful values for socket memory usage,
    from Shan Wei.

11) Eric Dumazet is so awesome he gets his own section:

       Socket memory cgroup code (I never should have applied those
       patches, grumble...) made erroneous changes to
       sk_sockets_allocated_read_positive().  It was changed to
       use percpu_counter_sum_positive (which requires BH disabling)
       instead of percpu_counter_read_positive (which does not).
       Revert back to avoid crashes and lockdep warnings.

       Adjust the default tcp_adv_win_scale and tcp_rmem[2] values
       to fix throughput regressions.  This is necessary as a result
       of our more precise skb->truesize tracking.

       Fix SKB leak in netem packet scheduler.

12) New device IDs for various bluetooth devices, from Manoj Iyer,
    AceLan Kao, and Steven Harms.

13) Fix command completion race in ipw2200, from Stanislav Yakovlev.

14) Fix rtlwifi oops on unload, from Larry Finger.

15) Fix hard_mtu when adjusting hard_header_len in smsc95xx driver.
    From Stephane Fillod.

16) ehea driver registers it's IRQ before all the necessary state is
    setup, resulting in crashes.  Fix from Thadeu Lima de Souza
    Cascardo.

17) Fix PHY connection failures in davinci_emac driver, from Anatolij
    Gustschin.

18) Missing break; in switch statement in bluetooth's
    hci_cmd_complete_evt().  Fix from Szymon Janc.

19) Fix queue programming in iwlwifi, from Johannes Berg.

20) Interrupt throttling defaults not being actually programmed into the
    hardware, fix from Jeff Kirsher and Ying Cai.

21) TLAN driver SKB encoding in descriptor busted on 64-bit, fix from
    Benjamin Poirier.

22) Fix blind status block RX producer pointer deref in TG3 driver, from
    Matt Carlson.

23) Promisc and multicast are busted on ehea, fixes from Thadeu Lima de
    Souza Cascardo.

24) Fix crashes in 6lowpan, from Alexander Smirnov.

25) tcp_complete_cwr() needs to be careful to not rewind the CWND to
    ssthresh if ssthresh has the "infinite" value.  Fix from Yuchung
    Cheng.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  sungem: Fix WakeOnLan
  tcp: change tcp_adv_win_scale and tcp_rmem[2]
  net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg
  drop_monitor: prevent init path from scheduling on the wrong cpu
  usbnet: fix failure handling in usbnet_probe
  usbnet: fix leak of transfer buffer of dev->interrupt
  ucc_geth: Add 16 bytes to max TX frame for VLANs
  net: ucc_geth, increase no. of HW RX descriptors
  netem: fix possible skb leak
  sky2: fix receive length error in mixed non-VLAN/VLAN traffic
  sky2: propogate rx hash when packet is copied
  net: fix two typos in skbuff.h
  cxgb3: Don't call cxgb_vlan_mode until q locks are initialized
  ixgbe: fix calling skb_put on nonlinear skb assertion bug
  ixgbe: Fix a memory leak in IEEE DCB
  igbvf: fix the bug when initializing the igbvf
  smsc75xx: enable mac to detect speed/duplex from phy
  smsc75xx: declare smsc75xx's MII as GMII capable
  smsc75xx: fix phy interrupt acknowledge
  smsc75xx: fix phy init reset loop
  ...

9 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Fri, 4 May 2012 00:08:58 +0000]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix OOPS seen in coretemp driver if the CPU core ID is too large"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (coretemp) Increase CPU core limit
  hwmon: (coretemp) fix oops on cpu unplug

9 years agoata: ahci_platform: Add synopsys ahci controller in DT's compatible list
Viresh Kumar [Sat, 21 Apr 2012 12:10:12 +0000]
ata: ahci_platform: Add synopsys ahci controller in DT's compatible list

SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares
ahci_platform driver with other controller versions.

This patch updates DT compatible list for ahci_platform. It also updates and
renames binding documentation to more generic name.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
Viresh Kumar [Sat, 21 Apr 2012 12:10:09 +0000]
ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros

#ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move
this definition and its usage outside of them.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agolibata: init ata_print_id to 0
Tero Roponen [Sun, 22 Apr 2012 08:38:00 +0000]
libata: init ata_print_id to 0

When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the
following differences:

 -ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
 -ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
 -ata3: DUMMY
 +ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
 +ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
  ata4: DUMMY
  ata5: DUMMY
 -ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47
 +ata6: DUMMY
 +ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47

The change of numbering comes from commit 85d6725b7c0d7e3f ("libata:
make ata_print_id atomic") that changed lines like

ap->print_id = ata_print_id++;
to
ap->print_id = atomic_inc_return(&ata_print_id);

As the latter behaves like ++ata_print_id, we must initialize
it to zero to start the numbering from one.

Signed-off-by: Tero Roponen <tero.roponen@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoahci: Detect Marvell 88SE9172 SATA controller
Matt Johnson [Fri, 27 Apr 2012 06:42:30 +0000]
ahci: Detect Marvell 88SE9172 SATA controller

The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked
once it was detected, but was missing an ahci_pci_tbl entry.

Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard.

Signed-off-by: Matt Johnson <johnso87@illinois.edu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agolibata: skip old error history when counting probe trials
Lin Ming [Thu, 3 May 2012 14:15:07 +0000]
libata: skip old error history when counting probe trials

Commit d902747("[libata] Add ATA transport class") introduced
ATA_EFLAG_OLD_ER to mark entries in the error ring as cleared.

But ata_count_probe_trials_cb() didn't check this flag and it still
counts the old error history. So wrong probe trials count is returned
and it causes problem, for example, SATA link speed is slowed down from
3.0Gbps to 1.5Gbps.

Fix it by checking ATA_EFLAG_OLD_ER in ata_count_probe_trials_cb().

Cc: stable <stable@vger.kernel.org> # 2.6.37+
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agosmp, idle: Allocate idle thread for each possible cpu during boot
Suresh Siddha [Sat, 21 Apr 2012 00:08:50 +0000]
smp, idle: Allocate idle thread for each possible cpu during boot

percpu areas are already allocated during boot for each possible cpu.
percpu idle threads can be considered as an extension of the percpu areas,
and allocate them for each possible cpu during boot.

This will eliminate the need for workqueue based idle thread allocation.
In future we can move the idle thread area into the percpu area too.

[ tglx: Moved the loop into smpboot.c and added an error check when
  the init code failed to allocate an idle thread for a cpu which
  should be onlined ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: venki@google.com
Link: http://lkml.kernel.org/r/1334966930.28674.245.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

9 years agonouveau: initialise has_optimus variable.
Dave Airlie [Wed, 2 May 2012 19:26:24 +0000]
nouveau: initialise has_optimus variable.

We should initialise this to 0 really to avoid getting false positives.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agosungem: Fix WakeOnLan
Gerard Lledo [Sat, 28 Apr 2012 08:52:37 +0000]
sungem: Fix WakeOnLan

WakeOnLan was broken in this driver because gp->asleep_wol is a 1-bit
bitfield and it was being assigned WAKE_MAGIC, which is (1 << 5).
gp->asleep_wol remains 0 and the machine never wakes up.  Fixed by casting
gp->wake_on_lan to bool.  Tested on an iBook G4.

Signed-off-by: Gerard Lledo <gerard.lledo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: change tcp_adv_win_scale and tcp_rmem[2]
Eric Dumazet [Wed, 2 May 2012 02:28:41 +0000]
tcp: change tcp_adv_win_scale and tcp_rmem[2]

tcp_adv_win_scale default value is 2, meaning we expect a good citizen
skb to have skb->len / skb->truesize ratio of 75% (3/4)

In 2.6 kernels we (mis)accounted for typical MSS=1460 frame :
1536 + 64 + 256 = 1856 'estimated truesize', and 1856 * 3/4 = 1392.
So these skbs were considered as not bloated.

With recent truesize fixes, a typical MSS=1460 frame truesize is now the
more precise :
2048 + 256 = 2304. But 2304 * 3/4 = 1728.
So these skb are not good citizen anymore, because 1460 < 1728

(GRO can escape this problem because it build skbs with a too low
truesize.)

This also means tcp advertises a too optimistic window for a given
allocated rcvspace : When receiving frames, sk_rmem_alloc can hit
sk_rcvbuf limit and we call tcp_prune_queue()/tcp_collapse() too often,
especially when application is slow to drain its receive queue or in
case of losses (netperf is fast, scp is slow). This is a major latency
source.

We should adjust the len/truesize ratio to 50% instead of 75%

This patch :

1) changes tcp_adv_win_scale default to 1 instead of 2

2) increase tcp_rmem[2] limit from 4MB to 6MB to take into account
better truesize tracking and to allow autotuning tcp receive window to
reach same value than before. Note that same amount of kernel memory is
consumed compared to 2.6 kernels.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg
Sasha Levin [Wed, 2 May 2012 03:58:43 +0000]
net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg

l2tp_ip_sendmsg could return without releasing socket lock, making it all the
way to userspace, and generating the following warning:

[  130.891594] ================================================
[  130.894569] [ BUG: lock held when returning to user space! ]
[  130.897257] 3.4.0-rc5-next-20120501-sasha #104 Tainted: G        W
[  130.900336] ------------------------------------------------
[  130.902996] trinity/8384 is leaving the kernel with locks still held!
[  130.906106] 1 lock held by trinity/8384:
[  130.907924]  #0:  (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff82b9503f>] l2tp_ip_sendmsg+0x2f/0x550

Introduced by commit 2f16270 ("l2tp: Fix locking in l2tp_ip.c").

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodrop_monitor: prevent init path from scheduling on the wrong cpu
Neil Horman [Tue, 1 May 2012 08:18:02 +0000]
drop_monitor: prevent init path from scheduling on the wrong cpu

I just noticed after some recent updates, that the init path for the drop
monitor protocol has a minor error.  drop monitor maintains a per cpu structure,
that gets initalized from a single cpu.  Normally this is fine, as the protocol
isn't in use yet, but I recently made a change that causes a failed skb
allocation to reschedule itself .  Given the current code, the implication is
that this workqueue reschedule will take place on the wrong cpu.  If drop
monitor is used early during the boot process, its possible that two cpus will
access a single per-cpu structure in parallel, possibly leading to data
corruption.

This patch fixes the situation, by storing the cpu number that a given instance
of this per-cpu data should be accessed from.  In the case of a need for a
reschedule, the cpu stored in the struct is assigned the rescheule, rather than
the currently executing cpu

Tested successfully by myself.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agousbnet: fix failure handling in usbnet_probe
tom.leiming@gmail.com [Sun, 29 Apr 2012 22:51:03 +0000]
usbnet: fix failure handling in usbnet_probe

If register_netdev returns failure, the dev->interrupt and
its transfer buffer should be released, so just fix it.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agousbnet: fix leak of transfer buffer of dev->interrupt
tom.leiming@gmail.com [Sun, 29 Apr 2012 22:51:02 +0000]
usbnet: fix leak of transfer buffer of dev->interrupt

The transfer buffer of dev->interrupt is allocated in .probe path,
but not freed in .disconnet path, so mark the interrupt URB as
URB_FREE_BUFFER to free the buffer when the URB is destroyed.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoucc_geth: Add 16 bytes to max TX frame for VLANs
Joakim Tjernlund [Sun, 29 Apr 2012 22:36:55 +0000]
ucc_geth: Add 16 bytes to max TX frame for VLANs

Creating a VLAN interface on top of ucc_geth adds 4 bytes
to the frame and the HW controller is not prepared to
TX a frame bigger than 1518 bytes which is 4 bytes too
small for a full VLAN frame. Add 16 bytes which will handle
the a simple VLAN and leaves 12 bytes for future expansion.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: ucc_geth, increase no. of HW RX descriptors
Joakim Tjernlund [Sun, 29 Apr 2012 22:36:54 +0000]
net: ucc_geth, increase no. of HW RX descriptors

In a busy network we see ucc_geth is dropping RX pkgs every now
and then. Increase the RX queues HW descriptors from
16 to 32 to deal with this.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge tag 'usb-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Wed, 2 May 2012 20:48:33 +0000]
Merge tag 'usb-3.4-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here are two EHCI Tegra driver patches for your tree.

  The first is a bit big, but the majority is just moving code around.
  It is needed due to the other EHCI core changes that went in way back
  in 3.4-rc1, so this driver will now properly handle suspend/resume, as
  it was broken.  The other one is a minor bugfix that resolves an
  warning that people have been seeing."

* tag 'usb-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: ehci-tegra: remove redundant gpio_set_value
  EHCI: update PM methods in ehci-tegra.c

9 years agoMerge tag 'tty-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Wed, 2 May 2012 20:47:49 +0000]
Merge tag 'tty-3.4-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull a TTY fix from Greg Kroah-Hartman:
 "This is a deadlock bugfix that was easy to hit, and that the vt layer
  lock rework got wrong, so it reverts the logic back to the way it was
  in 3.3 and earlier kernels to prevent problems."

* tag 'tty-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Fix deadlock on scroll-lock

9 years agoMerge tag 'nfs-for-3.4-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Linus Torvalds [Wed, 2 May 2012 15:17:57 +0000]
Merge tag 'nfs-for-3.4-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 - Fixes for the NFSv4 security negotiation
 - Use the correct hostname when mounting from a private namespace
 - NFS net namespace bugfixes for the pipefs filesystem
 - NFSv4 GETACL bugfixes
 - IPv6 bugfix for NFSv4 referrals

* tag 'nfs-for-3.4-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4.1: Use the correct hostname in the client identifier string
  SUNRPC: RPC client must use the current utsname hostname string
  NFS: get module in idmap PipeFS notifier callback
  NFS: Remove unused function nfs_lookup_with_sec()
  NFS: Honor the authflavor set in the clone mount data
  NFS: Fix following referral mount points with different security
  NFS: Do secinfo as part of lookup
  NFS: Handle exceptions coming out of nfs4_proc_fs_locations()
  NFS: Fix SECINFO_NO_NAME
  SUNRPC: traverse clients tree on PipeFS event
  SUNRPC: set per-net PipeFS superblock before notification
  SUNRPC: skip clients with program without PipeFS entries
  SUNRPC: skip dead but not buried clients on PipeFS events
  Avoid beyond bounds copy while caching ACL
  Avoid reading past buffer when calling GETACL
  fix page number calculation bug for block layout decode buffer
  NFSv4.1 fix page number calculation bug for filelayout decode buffers
  pnfs-obj: Remove unused variable from objlayout_get_deviceinfo()
  nfs4: fix referrals on mounts that use IPv6 addrs

9 years agoMerge tag 'ktest-for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/roste...
Linus Torvalds [Wed, 2 May 2012 02:43:34 +0000]
Merge tag 'ktest-for-v3.4-rc5' of git://git./linux/kernel/git/rostedt/linux-ktest

Pull two bug fixes in ktest from Steven Rostedt.

* tag 'ktest-for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix reboot on success stopping all reboots
  ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP

9 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Wed, 2 May 2012 00:24:05 +0000]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "misc fixes some of which are also applicable to 3.3 and removal of an
  unused function.  This has been sitting in -next for ages with no
  complaints.  Also there are no known regressions due to these patches"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Remove get_current_pgd().
  MIPS: ath79: fix AR933X WMAC reset code
  MIPS: JZ4740: Fix the JZ4740_IRQ_DMA macro
  MIPS: Use set_current_blocked() and block_sigmask()

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Tue, 1 May 2012 18:14:05 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

9 years agoUSB: ehci-tegra: remove redundant gpio_set_value
Stephen Warren [Mon, 30 Apr 2012 23:24:10 +0000]
USB: ehci-tegra: remove redundant gpio_set_value

The immediately preceding gpio_direction_output() already set the value,
so there's no need to repeat it. This also prevents gpio_set_value() from
WARNing when the GPIO is sleepable (e.g. is on an I2C expander); the set
direction API is always sleepable, but plain set_value isn't.

Cc: <stable@vger.kernel.org> # v3.3
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9 years agoEHCI: update PM methods in ehci-tegra.c
Alan Stern [Tue, 1 May 2012 15:28:49 +0000]
EHCI: update PM methods in ehci-tegra.c

This patch (as1547) rearranges the Power Management parts of the
ehci-tegra driver to match the conventions used in other EHCI platform
drivers.  In particular, the controller should not be powered down by
the root hub's suspend routine; the controller's power level should be
managed by the controller's own PM methods.

The end result of the patch is that the standard ehci_bus_suspend()
and ehci_bus_resume() methods can be used instead of special-purpose
routines.  The driver now uses the standard dev_pm_ops methods instead
of legacy power management.  Since there is no supported wakeup
mechanism for the controller, runtime suspend is forbidden by default
(this can be overridden via sysfs, if desired).

These adjustments are needed in order to make ehci-tegra compatible
with recent changes to the USB core.  The core now checks the root
hub's status following bus suspend; if the controller is automatically
powered down during bus suspend then the check will fail and the root
hub will be resumed immediately.  Doing the controller power-down in a
separate method avoids this problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9 years agovt: Fix deadlock on scroll-lock
Alan Cox [Tue, 1 May 2012 15:12:19 +0000]
vt: Fix deadlock on scroll-lock

Fixing the locking accidentally replaced a race in the scroll
lock handling with a deadlock. Turn it back into a race for
now.

The basic problem is that there are two paths into the tty
stop/start helpers. One via the tty layer ^S/^Q handling
where we need to take the kbd_event_lock and one via the
special keyboard handler for fn_hold where we already hold
it. Probably we need to split out into a separate LED lock
but for now just go back to the race as it's a bit close
to release.

Reported-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9 years agonetem: fix possible skb leak
Eric Dumazet [Sun, 29 Apr 2012 09:08:22 +0000]
netem: fix possible skb leak

skb_checksum_help(skb) can return an error, we must free skb in this
case. qdisc_drop(skb, sch) can also be feeded with a NULL skb (if
skb_unshare() failed), so lets use this generic helper.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosky2: fix receive length error in mixed non-VLAN/VLAN traffic
stephen hemminger [Mon, 30 Apr 2012 06:47:37 +0000]
sky2: fix receive length error in mixed non-VLAN/VLAN traffic

Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older
supported chips. Sometimes the VLAN bit is not set for valid VLAN packets
and also sometimes the VLAN bit is set for non-VLAN packets that came after
a VLAN packet. This results in a receive length error when VLAN hardware
tagging is enabled.

Fix: Variation on original fix proposed by Mirko.
The VLAN information is decoded in the status loop, and can be
applied to the received SKB there. This eliminates the need for the
separate tag field in the interface data structure. The tag has to
be copied and cleared if packet is copied. This version checked out
with vlan and normal traffic.

Note: vlan_tx_tag_present should be renamed vlan_tag_present, but that
is outside scope of this.

Reported-by: Mirko Lindner <mlindner@marvell.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosky2: propogate rx hash when packet is copied
stephen hemminger [Mon, 30 Apr 2012 05:49:45 +0000]
sky2: propogate rx hash when packet is copied

When a small packet is received, the driver copies it to a new skb to allow
reusing the full size Rx buffer. The copy was propogating the checksum offload
but not the receive hash information. The bug is impact was mostly harmless
and therefore not observed until reviewing this area of code.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agohwmon: (coretemp) Increase CPU core limit
Guenter Roeck [Tue, 1 May 2012 15:15:42 +0000]
hwmon: (coretemp) Increase CPU core limit

CPU core ID is used to index the core_data[] array. The core ID is, however, not
sequential; 10-core CPUS can have a core ID as high as 25. Increase the limit to
32 to be able to deal with current CPUs.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Durgadoss R <durgadoss.r@intel.com>

9 years agohwmon: (coretemp) fix oops on cpu unplug
Kirill A. Shutemov [Mon, 30 Apr 2012 13:18:01 +0000]
hwmon: (coretemp) fix oops on cpu unplug

coretemp tries to access core_data array beyond bounds on cpu unplug if
core id of the cpu if more than NUM_REAL_CORES-1.

BUG: unable to handle kernel NULL pointer dereference at 000000000000013c
IP: [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp]
PGD 673e5a067 PUD 66e9b3067 PMD 0
Oops: 0000 [#1] SMP
CPU 79
Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 nf_defrag_ipv4 ip6_tables xt_state nf_conntrack coretemp crc32c_intel asix tpm_tis pcspkr usbnet iTCO_wdt i2c_i801 microcode mii joydev tpm i2c_core iTCO_vendor_support tpm_bios i7core_edac igb ioatdma edac_core dca megaraid_sas [last unloaded: oprofile]

Pid: 3315, comm: set-cpus Tainted: G        W    3.4.0-rc5+ #2 QCI QSSC-S4R/QSSC-S4R
RIP: 0010:[<ffffffffa00159af>]  [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp]
RSP: 0018:ffff880472fb3d48  EFLAGS: 00010246
RAX: 0000000000000124 RBX: 0000000000000034 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000246
RBP: ffff880472fb3d88 R08: ffff88077fcd36c0 R09: 0000000000000001
R10: ffffffff8184bc48 R11: 0000000000000000 R12: ffff880273095800
R13: 0000000000000013 R14: ffff8802730a1810 R15: 0000000000000000
FS:  00007f694a20f720(0000) GS:ffff88077fcc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000000013c CR3: 000000067209b000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process set-cpus (pid: 3315, threadinfo ffff880472fb2000, task ffff880471fa0000)
Stack:
 ffff880277b4c308 0000000000000003 ffff880472fb3d88 0000000000000005
 0000000000000034 00000000ffffffd1 ffffffff81cadc70 ffff880472fb3e14
 ffff880472fb3dc8 ffffffff8161f48d ffff880471fa0000 0000000000000034
Call Trace:
 [<ffffffff8161f48d>] notifier_call_chain+0x4d/0x70
 [<ffffffff8107f1be>] __raw_notifier_call_chain+0xe/0x10
 [<ffffffff81059d30>] __cpu_notify+0x20/0x40
 [<ffffffff815fa251>] _cpu_down+0x81/0x270
 [<ffffffff815fa477>] cpu_down+0x37/0x50
 [<ffffffff815fd6a3>] store_online+0x63/0xc0
 [<ffffffff813c7078>] dev_attr_store+0x18/0x30
 [<ffffffff811f02cf>] sysfs_write_file+0xef/0x170
 [<ffffffff81180443>] vfs_write+0xb3/0x180
 [<ffffffff8118076a>] sys_write+0x4a/0x90
 [<ffffffff816236a9>] system_call_fastpath+0x16/0x1b
Code: 48 c7 c7 94 60 01 a0 44 0f b7 ac 10 ac 00 00 00 31 c0 e8 41 b7 5f e1 41 83 c5 02 49 63 c5 49 8b 44 c4 10 48 85 c0 74 56 45 31 ff <39> 58 18 75 4e eb 1f 49 63 d7 4c 89 f7 48 89 45 c8 48 6b d2 28
RIP  [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp]
 RSP <ffff880472fb3d48>
CR2: 000000000000013c

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

9 years agonet: fix two typos in skbuff.h
Eric Dumazet [Mon, 30 Apr 2012 21:29:16 +0000]
net: fix two typos in skbuff.h

fix kernel doc typos in function names

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoktest: Fix reboot on success stopping all reboots
Steven Rostedt [Tue, 1 May 2012 12:20:12 +0000]
ktest: Fix reboot on success stopping all reboots

The change to let individual tests decide to reboot the machine on
success of the entire test also prevented errors from rebooting
when an error was detected.

The "no_reboot" variable was only cleared if the test had
reboot_on_success set. But the no_reboot variable also prevents the test
rebooting when an error was detected even when REBOOT_ON_ERROR was set.

Add a new "reboot_success" variable that is used to determine if the
test should reboot on success and not touch the no_reboot variable.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP
Russ Dill [Tue, 24 Apr 2012 02:43:00 +0000]
ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP

When BISECT_REVERSE and BISECT_SKIP are used together with boot or test
testing, build failures are treated as boot or test failures and
'git bisect bad' is executed instead of 'git bisect skip'. This is because
the $ret value of -1 is treated as a build failure, but the $reverse_bisect
logic does not properly handle this.

Simple fix, only invert it if it is positive.

Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoMerge branch 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2...
Dave Airlie [Tue, 1 May 2012 11:25:06 +0000]
Merge branch 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6:
  drm/nv10/gpio: fix thinko in mask for gpio lines 2-9
  nvc0/fb: shut up PMFB interrupt after the first occurrence
  drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac
  drm/nouveau/bios: fix regression on some nv4x board

9 years agomfd: Fix build breakage in omap-usb-host.c
Russ Dill [Sun, 22 Apr 2012 08:48:18 +0000]
mfd: Fix build breakage in omap-usb-host.c

'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' removes the include for
linux/gpio.h from omap-usb-host.c. This include indirectly includes plat/cpu.h
which is required by omap-usb-host.c. Fix the build breakage by including
it directly.

Acked-by: Keshava Munegowda <keshava_mgowda@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>