8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Thu, 19 Jul 2012 18:17:30 +0000]
Merge git://git./linux/kernel/git/davem/net

Conflicts:
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

8 years agonet-tcp: Fast Open client - cookie-less mode
Yuchung Cheng [Thu, 19 Jul 2012 06:43:11 +0000]
net-tcp: Fast Open client - cookie-less mode

In trusted networks, e.g., intranet, data-center, the client does not
need to use Fast Open cookie to mitigate DoS attacks. In cookie-less
mode, sendmsg() with MSG_FASTOPEN flag will send SYN-data regardless
of cookie availability.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet-tcp: Fast Open client - detecting SYN-data drops
Yuchung Cheng [Thu, 19 Jul 2012 06:43:10 +0000]
net-tcp: Fast Open client - detecting SYN-data drops

On paths with firewalls dropping SYN with data or experimental TCP options,
Fast Open connections will have experience SYN timeout and bad performance.
The solution is to track such incidents in the cookie cache and disables
Fast Open temporarily.

Since only the original SYN includes data and/or Fast Open option, the
SYN-ACK has some tell-tale sign (tcp_rcv_fastopen_synack()) to detect
such drops. If a path has recurring Fast Open SYN drops, Fast Open is
disabled for 2^(recurring_losses) minutes starting from four minutes up to
roughly one and half day. sendmsg with MSG_FASTOPEN flag will succeed but
it behaves as connect() then write().

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)
Yuchung Cheng [Thu, 19 Jul 2012 06:43:09 +0000]
net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)

sendmsg() (or sendto()) with MSG_FASTOPEN is a combo of connect(2)
and write(2). The application should replace connect() with it to
send data in the opening SYN packet.

For blocking socket, sendmsg() blocks until all the data are buffered
locally and the handshake is completed like connect() call. It
returns similar errno like connect() if the TCP handshake fails.

For non-blocking socket, it returns the number of bytes queued (and
transmitted in the SYN-data packet) if cookie is available. If cookie
is not available, it transmits a data-less SYN packet with Fast Open
cookie request option and returns -EINPROGRESS like connect().

Using MSG_FASTOPEN on connecting or connected socket will result in
simlar errno like repeating connect() calls. Therefore the application
should only use this flag on new sockets.

The buffer size of sendmsg() is independent of the MSS of the connection.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet-tcp: Fast Open client - receiving SYN-ACK
Yuchung Cheng [Thu, 19 Jul 2012 06:43:08 +0000]
net-tcp: Fast Open client - receiving SYN-ACK

On receiving the SYN-ACK after SYN-data, the client needs to
a) update the cached MSS and cookie (if included in SYN-ACK)
b) retransmit the data not yet acknowledged by the SYN-ACK in the final ACK of
   the handshake.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet-tcp: Fast Open client - sending SYN-data
Yuchung Cheng [Thu, 19 Jul 2012 06:43:07 +0000]
net-tcp: Fast Open client - sending SYN-data

This patch implements sending SYN-data in tcp_connect(). The data is
from tcp_sendmsg() with flag MSG_FASTOPEN (implemented in a later patch).

The length of the cookie in tcp_fastopen_req, init'd to 0, controls the
type of the SYN. If the cookie is not cached (len==0), the host sends
data-less SYN with Fast Open cookie request option to solicit a cookie
from the remote. If cookie is not available (len > 0), the host sends
a SYN-data with Fast Open cookie option. If cookie length is negative,
  the SYN will not include any Fast Open option (for fall back operations).

To deal with middleboxes that may drop SYN with data or experimental TCP
option, the SYN-data is only sent once. SYN retransmits do not include
data or Fast Open options. The connection will fall back to regular TCP
handshake.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet-tcp: Fast Open client - cookie cache
Yuchung Cheng [Thu, 19 Jul 2012 06:43:06 +0000]
net-tcp: Fast Open client - cookie cache

With help from Eric Dumazet, add Fast Open metrics in tcp metrics cache.
The basic ones are MSS and the cookies. Later patch will cache more to
handle unfriendly middleboxes.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet-tcp: Fast Open base
Yuchung Cheng [Thu, 19 Jul 2012 06:43:05 +0000]
net-tcp: Fast Open base

This patch impelements the common code for both the client and server.

1. TCP Fast Open option processing. Since Fast Open does not have an
   option number assigned by IANA yet, it shares the experiment option
   code 254 by implementing draft-ietf-tcpm-experimental-options
   with a 16 bits magic number 0xF989. This enables global experiments
   without clashing the scarce(2) experimental options available for TCP.

   When the draft status becomes standard (maybe), the client should
   switch to the new option number assigned while the server supports
   both numbers for transistion.

2. The new sysctl tcp_fastopen

3. A place holder init function

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomlx4_en: map entire pages to increase throughput
Thadeu Lima de Souza Cascardo [Mon, 16 Jul 2012 07:01:53 +0000]
mlx4_en: map entire pages to increase throughput

In its receive path, mlx4_en driver maps each page chunk that it pushes
to the hardware and unmaps it when pushing it up the stack. This limits
throughput to about 3Gbps on a Power7 8-core machine.

One solution is to map the entire allocated page at once. However, this
requires that we keep track of every page fragment we give to a
descriptor. We also need to work with the discipline that all fragments will
be released (in the sense that it will not be reused by the driver
anymore) in the order they are allocated to the driver.

This requires that we don't reuse any fragments, every single one of
them must be reallocated. We do that by releasing all the fragments that
are processed and only after finished processing the descriptors, we
start the refill.

We also must somehow guarantee that we either refill all fragments in a
descriptor or none at all, without resorting to giving up a page
fragment that we would have already given. Otherwise, we would break the
discipline of only releasing the fragments in the order they were
allocated.

This has passed page allocation fault injections (restricted to the
driver by using required-start and required-end) and device hotplug
while 16 TCP streams were able to deliver more than 9Gbps.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosfc: initialize dynamic sysfs attributes for lockdep
Michal Schmidt [Thu, 19 Jul 2012 07:04:45 +0000]
sfc: initialize dynamic sysfs attributes for lockdep

Dynamically allocated sysfs attributes must be initialized using
sysfs_attr_init(), otherwise lockdep complains:
BUG: key <address> not in .data!

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobridge: update documentation references
stephen hemminger [Thu, 19 Jul 2012 07:01:07 +0000]
bridge: update documentation references

Update the references to bridge utilities and web pages
to current locations

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: e100: ucode is optional in some cases
Bjørn Mork [Thu, 19 Jul 2012 06:28:40 +0000]
net: e100: ucode is optional in some cases

commit 9ac32e1b firmware: convert e100 driver to request_firmware()

did a straight conversion of the in-driver ucode to external
files.  This introduced the possibility of the driver failing
to enable an interface due to missing ucode. There was no
evaluation of the importance of the ucode at the time.

Based on comments in earlier versions of this driver, and in
the source code for the FreeBSD fxp driver, we can assume that
the ucode implements the "CPU Cycle Saver" feature on supported
adapters.  Although generally wanted, this is an optional
feature. The ucode source is not available, preventing it from
being included in free distributions. This creates unnecessary
problems for the end users. Doing a network install based on a
free distribution installer requires the user to download and
insert the ucode into the installer.

Making the ucode optional when possible improves the user
experience and driver usability.

The ucode for some adapters include a bugfix, making it
essential.  We continue to fail for these adapters unless the
ucode is available.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoasix: AX88172A driver depends on phylib
Christian Riesch [Thu, 19 Jul 2012 02:02:19 +0000]
asix: AX88172A driver depends on phylib

Since commit 16626b0cc3d5afe250850f96759b241f8a403b52 the asix
driver depends on the phylib. Select phylib when the asix driver is
selected.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoasix: Add support for programming the EEPROM
Christian Riesch [Thu, 19 Jul 2012 00:23:07 +0000]
asix: Add support for programming the EEPROM

This patch adds the asix_set_eeprom() function to provide support for
programming the configuration EEPROM via ethtool.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoasix: Rework reading from EEPROM
Christian Riesch [Thu, 19 Jul 2012 00:23:06 +0000]
asix: Rework reading from EEPROM

The current code for reading the EEPROM via ethtool in the asix
driver has a few issues. It cannot handle odd length values
(accesses must be aligned at 16 bit boundaries) and interprets the
offset provided by ethtool as 16 bit word offset instead as byte offset.

The new code for asix_get_eeprom() introduced by this patch is
modeled after the code in
drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c
and provides read access to the entire EEPROM with arbitrary
offsets and lengths.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: stmmac: Add ip version to dts bindings
Dinh Nguyen [Wed, 18 Jul 2012 13:28:26 +0000]
net: stmmac: Add ip version to dts bindings

Because there are multiple variants to the stmmac/dwmac driver, the
dts bindings should be updated to include version of the IP used.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocxgb3: Set vlan_feature on net_device
brenohl@br.ibm.com [Wed, 18 Jul 2012 09:29:08 +0000]
cxgb3: Set vlan_feature on net_device

cxgb3 interface has a bad performance when VLAN is set. On my current
setup, a PowerLinux 7R2, I am able to get around 7 Gbps on a TCP_STREAM
(8 instances, 4k message).
With this patch, I am able to reach 9.5 Gbps.

Signed-off-by: Breno Leitao <brenohl@br.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipx: move peII functions
stephen hemminger [Wed, 18 Jul 2012 09:09:48 +0000]
ipx: move peII functions

The Ethernet II wrapper is only used by IPX protocol, may have once
been used by Appletalk but not currently. Therefore it makes sense to
move it to the IPX dust bin and drop the exports.

Build tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Fix warnings in dst_ops.h
David S. Miller [Thu, 19 Jul 2012 17:43:03 +0000]
net: Fix warnings in dst_ops.h

include/net/dst_ops.h:28:20: warning: ‘struct sock’ declared inside parameter list

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: tcp: remove per net tcp_sock
Eric Dumazet [Thu, 19 Jul 2012 07:34:03 +0000]
ipv4: tcp: remove per net tcp_sock

tcp_v4_send_reset() and tcp_v4_send_ack() use a single socket
per network namespace.

This leads to bad behavior on multiqueue NICS, because many cpus
contend for the socket lock and once socket lock is acquired, extra
false sharing on various socket fields slow down the operations.

To better resist to attacks, we use a percpu socket. Each cpu can
run without contention, using appropriate memory (local node)

Additional features :

1) We also mirror the queue_mapping of the incoming skb, so that
answers use the same queue if possible.

2) Setting SOCK_USE_WRITE_QUEUE socket flag speedup sock_wfree()

3) We now limit the number of in-flight RST/ACK [1] packets
per cpu, instead of per namespace, and we honor the sysctl_wmem_default
limit dynamically. (Prior to this patch, sysctl_wmem_default value was
copied at boot time, so any further change would not affect tcp_sock
limit)

[1] These packets are only generated when no socket was matched for
the incoming packet.

Reported-by: Bill Sommerfeld <wsommerfeld@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: use seqlock for nh_exceptions
Julian Anastasov [Wed, 18 Jul 2012 10:15:35 +0000]
ipv4: use seqlock for nh_exceptions

Use global seqlock for the nh_exceptions. Call
fnhe_oldest with the right hash chain. Correct the diff
value for dst_set_expires.

v2: after suggestions from Eric Dumazet:
* get rid of spin lock fnhe_lock, rearrange update_or_create_fnhe
* continue daddr search in rt_bind_exception

v3:
* remove the daddr check before seqlock in rt_bind_exception
* restart lookup in rt_bind_exception on detected seqlock change,
as suggested by David Miller

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Fix time difference calculation in rt_bind_exception().
David S. Miller [Thu, 19 Jul 2012 15:46:59 +0000]
ipv4: Fix time difference calculation in rt_bind_exception().

Reported-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/mlx4_en: Add accelerated RFS support
Amir Vadai [Wed, 18 Jul 2012 22:33:52 +0000]
net/mlx4_en: Add accelerated RFS support

Use RFS infrastructure and flow steering in HW to keep CPU
affinity of rx interrupts and application per TCP stream.

A flow steering filter is added to the HW whenever the RFS
ndo callback is invoked by core networking code.

Because the invocation takes place in interrupt context, the
actual setup of HW is done using workqueue. Whenever new filter
is added, the driver checks for expiry of existing filters.

Since there's window in time between the point where the core
RFS code invoked the ndo callback, to the point where the HW
is configured from the workqueue context, the 2nd, 3rd etc
packets from that stream will cause the net core to invoke
the callback again and again.

To prevent inefficient/double configuration of the HW, the filters
are kept in a database which is indexed using hash function to enable
fast access.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years ago{NET,IB}/mlx4: Add rmap support to mlx4_assign_eq
Amir Vadai [Wed, 18 Jul 2012 22:33:51 +0000]
{NET,IB}/mlx4: Add rmap support to mlx4_assign_eq

Enable callers of mlx4_assign_eq to supply a pointer to cpu_rmap.
If supplied, the assigned IRQ is tracked using rmap infrastructure.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/rps: Protect cpu_rmap.h from double inclusion
Amir Vadai [Wed, 18 Jul 2012 22:33:50 +0000]
net/rps: Protect cpu_rmap.h from double inclusion

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/mlx4: Move MAC_MASK to a common place
Amir Vadai [Wed, 18 Jul 2012 22:33:49 +0000]
net/mlx4: Move MAC_MASK to a common place

Define this macro is one common place instead of duplicating it over the code

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: fix address selection in fib_compute_spec_dst
Julian Anastasov [Wed, 18 Jul 2012 21:35:03 +0000]
ipv4: fix address selection in fib_compute_spec_dst

ip_options_compile can be called for forwarded packets,
make sure the specific-destionation address is a local one as
specified in RFC 1812, 4.2.2.2 Addresses in Options

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: optimize fib_compute_spec_dst call in ip_options_echo
Julian Anastasov [Wed, 18 Jul 2012 21:34:24 +0000]
ipv4: optimize fib_compute_spec_dst call in ip_options_echo

Move fib_compute_spec_dst at the only place where it
is needed.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge tag 'md-3.5-fixes' of git://neil.brown.name/md
Linus Torvalds [Thu, 19 Jul 2012 15:27:13 +0000]
Merge tag 'md-3.5-fixes' of git://neil.brown.name/md

Pull three md bugfixes from NeilBrown:
 "One of the bugs was introduced in 3.5-rc1.  Others have been there for
  longer."

* tag 'md-3.5-fixes' of git://neil.brown.name/md:
  md/raid1: close some possible races on write errors during resync
  md: avoid crash when stopping md array races with closing other open fds.
  md: fix bug in handling of new_data_offset

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 19 Jul 2012 15:21:13 +0000]
Merge git://git./linux/kernel/git/davem/net

Pull networking changes from David Miller:
 "Ok, we should be good to go now"

1) We have to statically initialize the init_net device list head rather
   than do so in an initcall, otherwise netprio_cgroup crashes if it's
   built statically rather than modular (Mark D.  Rustad)

2) Fix SKB null oopser in CIPSO ipv4 option processing (Paul Moore)

3) Qlogic maintainers update (Anirban Chakraborty)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: Statically initialize init_net.dev_base_head
  MAINTAINERS: Changes in qlcnic and qlge maintainers list
  cipso: don't follow a NULL pointer when setsockopt() is called

8 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Thu, 19 Jul 2012 15:15:55 +0000]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/jikos/hid

Pull HID update from Jiri Kosina:
 "A final round of changes for HID for 3.5: just device ID additions."

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-multitouch: add support for Zytronic panels
  HID: add Sennheiser BTD500USB device support
  HID: add battery quirk for Apple Wireless ANSI

8 years agocx25821: Remove bad strcpy to read-only char*
Ezequiel Garcia [Wed, 18 Jul 2012 13:05:26 +0000]
cx25821: Remove bad strcpy to read-only char*

The strcpy was being used to set the name of the board.  Since the
destination char* was read-only and the name is set statically at
compile time; this was both wrong and redundant.

The type of char* is changed to const char* to prevent future errors.

Reported-by: Radek Masin <radek@masin.eu>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
[ Taking directly due to vacations   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoHID: hid-multitouch: add support for Zytronic panels
Benjamin Tissoires [Tue, 19 Jun 2012 12:39:54 +0000]
HID: hid-multitouch: add support for Zytronic panels

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

8 years agomd/raid1: close some possible races on write errors during resync
NeilBrown [Thu, 19 Jul 2012 05:59:18 +0000]
md/raid1: close some possible races on write errors during resync

commit 4367af556133723d0f443e14ca8170d9447317cb
   md/raid1: clear bad-block record when write succeeds.

Added a 'reschedule_retry' call possibility at the end of
end_sync_write, but didn't add matching code at the end of
sync_request_write.  So if the writes complete very quickly, or
scheduling makes it seem that way, then we can miss rescheduling
the request and the resync could hang.

Also commit 73d5c38a9536142e062c35997b044e89166e063b
    md: avoid races when stopping resync.

Fix a race condition in this same code in end_sync_write but didn't
make the change in sync_request_write.

This patch updates sync_request_write to fix both of those.
Patch is suitable for 3.1 and later kernels.

Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Original-version-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>

8 years agomd: avoid crash when stopping md array races with closing other open fds.
NeilBrown [Thu, 19 Jul 2012 05:59:18 +0000]
md: avoid crash when stopping md array races with closing other open fds.

md will refuse to stop an array if any other fd (or mounted fs) is
using it.
When any fs is unmounted of when the last open fd is closed all
pending IO will be flushed (e.g. sync_blockdev call in __blkdev_put)
so there will be no pending IO to worry about when the array is
stopped.

However in order to send the STOP_ARRAY ioctl to stop the array one
must first get and open fd on the block device.
If some fd is being used to write to the block device and it is closed
after mdadm open the block device, but before mdadm issues the
STOP_ARRAY ioctl, then there will be no last-close on the md device so
__blkdev_put will not call sync_blockdev.

If this happens, then IO can still be in-flight while md tears down
the array and bad things can happen (use-after-free and subsequent
havoc).

So in the case where do_md_stop is being called from an open file
descriptor, call sync_block after taking the mutex to ensure there
will be no new openers.

This is needed when setting a read-write device to read-only too.

Cc: stable@vger.kernel.org
Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

8 years agomd: fix bug in handling of new_data_offset
NeilBrown [Thu, 19 Jul 2012 05:59:18 +0000]
md: fix bug in handling of new_data_offset

commit c6563a8c38fde3c1c7fc925a10bde3ca20799301
    md: add possibility to change data-offset for devices.

introduced a 'new_data_offset' attribute which should normally
be the same as 'data_offset', but can be explicitly set to a different
value to allow a reshape operation to move the data.

Unfortunately when the 'data_offset' is explicitly set through
sysfs, the new_data_offset is not also set, so the two would become
out-of-sync incorrectly.

One result of this is that trying to set the 'size' after the
'data_offset' would fail because it is not permitted to set the size
when the 'data_offset' and 'new_data_offset' are different - as that
can be confusing.
Consequently when mdadm tried to do this while assembling an IMSM
array it would fail.

This bug was introduced in 3.5-rc1.

Reported-by: Brian Downing <bdowning@lavos.net>
Bisected-by: Brian Downing <bdowning@lavos.net>
Tested-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: NeilBrown <neilb@suse.de>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Linus Torvalds [Thu, 19 Jul 2012 01:40:38 +0000]
Merge git://git./linux/kernel/git/nab/target-pending

Pull target fixes from Nicholas Bellinger:
 "This includes a bugfix from MDR to address a NULL pointer OOPs with
  FCoE aborts, along with a WRITE_SAME emulation bugfix for NOLB=0
  cases, and persistent reservation return cleanups from Roland.

  All three patches are CC'ed to stable."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix range calculation in WRITE SAME emulation when num blocks == 0
  target: Clean up returning errors in PR handling code
  tcm_fc: Fix crash seen with aborts and large reads

8 years agokexec: update URL of kexec homepage
Olaf Hering [Wed, 18 Jul 2012 21:12:04 +0000]
kexec: update URL of kexec homepage

The referenced html file does not exist anymore. Replace the URL with
the current project homepage.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomips: fix bug.h build regression
Yoichi Yuasa [Wed, 18 Jul 2012 21:12:01 +0000]
mips: fix bug.h build regression

Commit 377780887 ("bug.h: need linux/kernel.h for TAINT_WARN.") broke
all MIPS builds:

CC arch/mips/kernel/machine_kexec.o
  include/linux/log2.h: In function '__ilog2_u32':
  include/linux/log2.h:34:2: error: implicit declaration of function 'fls' [-Werror=implicit-function-declaration]
  include/linux/log2.h: In function '__ilog2_u64':
  include/linux/log2.h:42:2: error: implicit declaration of function 'fls64' [-Werror=implicit-function-declaration]
  ...

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Tested-by: John Crispin <blogic@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMake wait_for_device_probe() also do scsi_complete_async_scans()
Linus Torvalds [Thu, 19 Jul 2012 01:15:46 +0000]
Make wait_for_device_probe() also do scsi_complete_async_scans()

Commit a7a20d103994 ("sd: limit the scope of the async probe domain")
make the SCSI device probing run device discovery in it's own async
domain.

However, as a result, the partition detection was no longer synchronized
by async_synchronize_full() (which, despite the name, only synchronizes
the global async space, not all of them).  Which in turn meant that
"wait_for_device_probe()" would not wait for the SCSI partitions to be
parsed.

And "wait_for_device_probe()" was what the boot time init code relied on
for mounting the root filesystem.

Now, most people never noticed this, because not only is it
timing-dependent, but modern distributions all use initrd.  So the root
filesystem isn't actually on a disk at all.  And then before they
actually mount the final disk filesystem, they will have loaded the
scsi-wait-scan module, which not only does the expected
wait_for_device_probe(), but also does scsi_complete_async_scans().

[ Side note: scsi_complete_async_scans() had also been partially broken,
  but that was fixed in commit 43a8d39d0137 ("fix async probe
  regression"), so that same commit a7a20d103994 had actually broken
  setups even if you used scsi-wait-scan explicitly ]

Solve this problem by just moving the scsi_complete_async_scans() call
into wait_for_device_probe().  Everybody who wants to wait for device
probing to finish really wants the SCSI probing to complete, so there's
no reason not to do this.

So now "wait_for_device_probe()" really does what the name implies, and
properly waits for device probing to finish.  This also removes the now
unnecessary extra calls to scsi_complete_async_scans().

Reported-and-tested-by: Artem S. Tashkinov <t.artem@mailcity.com>
Cc: Dan Williams <dan.j.williams@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: Borislav Petkov <bp@amd64.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Wed, 18 Jul 2012 20:42:44 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull SELinux regression fixes from James Morris.

Andrew Morton has a box that hit that open perms problem.

I also renamed the "epollwakeup" selinux name for the new capability to
be "block_suspend", to match the rename done by commit d9914cf66181
("PM: Rename CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPEND").

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  SELinux: do not check open perms if they are not known to policy
  SELinux: include definition of new capabilities

8 years agonet: Statically initialize init_net.dev_base_head
Rustad, Mark D [Wed, 18 Jul 2012 09:06:07 +0000]
net: Statically initialize init_net.dev_base_head

This change eliminates an initialization-order hazard most
recently seen when netprio_cgroup is built into the kernel.

With thanks to Eric Dumazet for catching a bug.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoixgbe: Cleanup holes in flags after removing several of them
Alexander Duyck [Sat, 19 May 2012 01:10:50 +0000]
ixgbe: Cleanup holes in flags after removing several of them

This change is just meant to defragment the flags as there are several hole
that have been introduced since several features, or the flags for them,
have been removed.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Retire RSS enabled and capable flags
Alexander Duyck [Sat, 14 Jul 2012 05:42:36 +0000]
ixgbe: Retire RSS enabled and capable flags

All of our hardware supports RSS even if it is only for a single queue.  So
instead of toting around the RSS enable flag I am updating the code so that
all devices are enabled and if we want to disable RSS it is indicated via
the RSS mask.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Add support for SR-IOV w/ DCB or RSS
Alexander Duyck [Sat, 14 Jul 2012 06:48:49 +0000]
ixgbe: Add support for SR-IOV w/ DCB or RSS

This change essentially makes it so that we can enable almost all of the
features all at once.  This patch allows for the combination of SR-IOV,
DCB, and FCoE in the case of the x540.  It also beefs up the SR-IOV by
adding support for RSS to the PF.

The testing matrix gets to be very complex for this patch as there are a
number of different features and subsets for queueing options.  I tried to
narrow these down a bit by restricting the PF to only supporting 4TC DCB
when it is enabled in addition to SR-IOV.

Cc: Greg Rose <gregory.v.rose@intel.com>
Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Update configure virtualization to allow for multiple PF pools
Alexander Duyck [Fri, 18 May 2012 06:34:08 +0000]
ixgbe: Update configure virtualization to allow for multiple PF pools

This change allows all pools from the default pool forward to be enabled vi
ixgbe_configure_virtualization.  This is needed as we are planning to use
queues belonging to adjacent pools for FCoE when SR-IOV and FCoE are both
enabled.

In addition this patch contains some minor formatting changes as there were
a few spots that seemed to be in need of some cleanup.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbevf: Fix multiple issues in ixgbevf_get/set_ringparam
Alexander Duyck [Thu, 19 Jul 2012 00:18:05 +0000]
ixgbevf: Fix multiple issues in ixgbevf_get/set_ringparam

In ixgbevf_get_ringparam we could run into a NULL pointer dereference
if the rings were not allocated when we attempted the call.  To prevent
that we can just access the tx/rx_ring_count values instead of attempting
to access the rings to get the count.

This change corrects a memory leak and memory corruption in
ixgbevf_set_ringparam.

The memory leak was due to us not freeing the resources from the ring
before overwriting them.  This change corrects the memory leak by making
certain to call ixgbe_free_tx/rx_resources on the rings prior to freeing
them.

The memory corruption was because we were replacing the rings but not
updating the q_vectors.  It addresses the memory corruption by leaving the
rings in place and instead just copying the contents of the new rings into
the existing rings.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbevf: Consolidate Tx context descriptor creation code
Alexander Duyck [Fri, 11 May 2012 08:33:21 +0000]
ixgbevf: Consolidate Tx context descriptor creation code

There is a good bit of redundancy between the Tx checksum and segmentation
offloads.  In order to reduce some of this I am moving the code for
creating a context descriptor into a separate function.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbevf: Add netdev to ring structure
Alexander Duyck [Fri, 11 May 2012 08:33:16 +0000]
ixgbevf: Add netdev to ring structure

This change adds the netdev to the ring structure.  This allows for a
quicker transition from ring to netdev without having to go from ring to
adapter to netdev.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbevf: Do not rewind the Rx ring before bumping tail
Alexander Duyck [Fri, 11 May 2012 08:33:11 +0000]
ixgbevf: Do not rewind the Rx ring before bumping tail

The driver is going back one step from its' previous location before
bumping tail. This is incorrect.  We should just be writing the value of
next_to_use into the tail register.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbevf: fix VF untagging when 802.1 prio is set
Pascal Bouchareine [Thu, 14 Jun 2012 02:18:18 +0000]
ixgbevf: fix VF untagging when 802.1 prio is set

We have had an issue when using ixgbe+ixgbevf and 802.1 VLAN tagging.

When attaching a VLAN to a VF, frames with a 802.1q priority appeared
untagged on the VF hence not reaching the VLAN, where frames with
priority 0 where tagged as expected and seen by the VLAN device.

This seems due to the way ixgbevf is looking up the full tag
(prio+cfi+vlan) against the adapter active_vlans, as a condition to mark
the skb tagged.

Signed-off-by: Pascal Bouchareine <pascal@gandi.net>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoipv6: add ipv6_addr_hash() helper
Eric Dumazet [Wed, 18 Jul 2012 08:11:12 +0000]
ipv6: add ipv6_addr_hash() helper

Introduce ipv6_addr_hash() helper doing a XOR on all bits
of an IPv6 address, with an optimized x86_64 version.

Use it in flow dissector, as suggested by Andrew McGregor,
to reduce hash collision probabilities in fq_codel (and other
users of flow dissector)

Use it in ip6_tunnel.c and use more bit shuffling, as suggested
by David Laight, as existing hash was ignoring most of them.

Use it in sunrpc and use more bit shuffling, using hash_32().

Use it in net/ipv6/addrconf.c, using hash_32() as well.

As a cleanup, use it in net/ipv4/tcp_metrics.c

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrew McGregor <andrewmcgr@gmail.com>
Cc: Dave Taht <dave.taht@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoteam: refine IFF_XMIT_DST_RELEASE capability
Jiri Pirko [Wed, 18 Jul 2012 07:39:38 +0000]
team: refine IFF_XMIT_DST_RELEASE capability

Cloned patch of Eric Dumazet for bonding.

Some workloads greatly benefit of IFF_XMIT_DST_RELEASE capability
on output net device, avoiding dirtying dst refcount.

team currently disables IFF_XMIT_DST_RELEASE unconditionally.

If all ports have the IFF_XMIT_DST_RELEASE bit set, then
team dev can also have it in its priv_flags.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 18 Jul 2012 17:36:02 +0000]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

One more time/ntp fix pulled from Ingo Molnar.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp: Fix STA_INS/DEL clearing bug

8 years agov4l2-dev: forgot to add VIDIOC_DV_TIMINGS_CAP.
Hans Verkuil [Wed, 11 Jul 2012 12:12:45 +0000]
v4l2-dev: forgot to add VIDIOC_DV_TIMINGS_CAP.

The VIDIOC_DV_TIMINGS_CAP ioctl check wasn't added to determine_valid_ioctls().
This caused this ioctl to always return -ENOTTY.

The cause for this was that for 3.5 two patch series were merged, one
changing V4L2 core ioctl handling and one adding new functionality, and
some of the new functionality wasn't handled by the new V4L2 core code.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[ Taking it directly due to vacations  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Wed, 18 Jul 2012 17:27:08 +0000]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes for SPEAr from Olof Johansson:
 "These are arriving very late in the release cycle, but there has been
  a change of maintainers on the SPEAr platform and they have needed a
  while to get going.

  The patch count is higher than I would like at this point, but they're
  all relevant fixes and well-contained in their own platform code.  I
  still think it's suitable 3.5 material and I don't think it should
  increase the need for a -rc8 since they are so contained."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi
  ARM: dts: SPEAr320: Boot the board in EXTENDED_MODE
  ARM: dts: SPEAr320: Fix compatible string
  Clk: SPEAr1340: Update sys clock parent array
  clk: SPEAr1340: Fix clk enable register for uart1 and i2c1.
  ARM: SPEAr13xx: Fix Interrupt bindings
  Clk:spear6xx:Fix: Rename clk ids within predefined limit
  Clk:spear3xx:Fix: Rename clk ids within predefined limit
  clk:spear1310:Fix: Rename clk ids within predefined limit
  clk:spear1340:Fix: Rename clk ids within predefined limit

8 years agodriver: net: ethernet: cpsw: runtime PM support
Mugunthan V N [Tue, 17 Jul 2012 08:09:50 +0000]
driver: net: ethernet: cpsw: runtime PM support

Enabling runtime PM support for cpsw driver

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodriver: net: ethernet: davinci_mdio: runtime PM support
Mugunthan V N [Tue, 17 Jul 2012 08:09:49 +0000]
driver: net: ethernet: davinci_mdio: runtime PM support

Enabling runtime PM support for davinci mdio driver

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agojme: netpoll support
Peter Wu [Tue, 17 Jul 2012 06:29:34 +0000]
jme: netpoll support

This patch adds the netpoll function to support netconsole. Tested and works
fine on my "JMC250 PCI Express Gigabit Ethernet Controller" (PCI ID 0250).

Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoskbuff: Use correct allocation in skb_copy_ubufs
Krishna Kumar [Tue, 17 Jul 2012 02:05:29 +0000]
skbuff: Use correct allocation in skb_copy_ubufs

Use correct allocation flags during copy of user space fragments
to the kernel. Also "improve" couple of for loops.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ethernet: davinci_emac: add OF support
Heiko Schocher [Tue, 17 Jul 2012 00:34:24 +0000]
net: ethernet: davinci_emac: add OF support

add OF support for the davinci_emac driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: netdev@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Anatoly Sivov <mm05@mail.ru>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoISDN: Add check for usb_alloc_urb() result
Karsten Keil [Thu, 12 Jul 2012 22:59:46 +0000]
ISDN: Add check for usb_alloc_urb() result

usb_alloc_urb() return value needs to be checked to avoid
later NULL pointer access.
Reported by rucsoftsec@gmail.com via bugzilla.kernel.org #44601.

Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoISDN: Add check for return value of pnp_activate_dev()
Karsten Keil [Thu, 12 Jul 2012 07:01:10 +0000]
ISDN: Add check for return value of pnp_activate_dev()

pnp_activate_dev() return value needs to be checked to make sure that
following calls calls to the PNP functions do work correctly.
Fix for report #44491 on bugzilla.kernel.org.

Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlge: fix an "&&" vs "||" bug
Dan Carpenter [Thu, 12 Jul 2012 04:47:03 +0000]
qlge: fix an "&&" vs "||" bug

The condition is always true so WOL will never work.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ftgmac100/ftmac100: dont pull too much data
Eric Dumazet [Thu, 12 Jul 2012 04:19:38 +0000]
net: ftgmac100/ftmac100: dont pull too much data

Drivers should pull only ethernet header from page frag
to skb->head.

Pulling 64 bytes is too much for TCP (without options) on IPv4.

However, it makes sense to pull all the frame if it fits the
128 bytes bloc allocated for skb->head, to free one page per
small incoming frame.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Po-Yu Chuang <ratbert@faraday-tech.com>
Acked-by: Yan-Pai Chen <yanpai.chen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: qmi_wwan: add ZTE MF821D
Bjørn Mork [Thu, 12 Jul 2012 01:18:26 +0000]
net: qmi_wwan: add ZTE MF821D

Sold by O2 (telefonica germany) under the name "LTE4G"

Tested-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/ipv4: VTI support new module for ip_vti.
Saurabh [Tue, 17 Jul 2012 09:44:54 +0000]
net/ipv4: VTI support new module for ip_vti.

New VTI tunnel kernel module, Kconfig and Makefile changes.

Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com>
Reviewed-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/ipv4: VTI support rx-path hook in xfrm4_mode_tunnel.
Saurabh [Tue, 17 Jul 2012 09:44:49 +0000]
net/ipv4: VTI support rx-path hook in xfrm4_mode_tunnel.

Incorporated David and Steffen's comments.
Add hook for rx-path xfmr4_mode_tunnel for VTI tunnel module.

Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com>
Reviewed-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMAINTAINERS: Changes in qlcnic and qlge maintainers list
Anirban Chakraborty [Tue, 17 Jul 2012 09:22:09 +0000]
MAINTAINERS: Changes in qlcnic and qlge maintainers list

Please apply.

Thanks.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoasix: Fix return value in AX88172A driver bind function
Christian Riesch [Wed, 18 Jul 2012 10:56:52 +0000]
asix: Fix return value in AX88172A driver bind function

Return -ENOTSUPP if the initialization fails because the
device is configured for a mode that is not supported by the driver.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotcp: refine SYN handling in tcp_validate_incoming
Eric Dumazet [Tue, 17 Jul 2012 12:29:30 +0000]
tcp: refine SYN handling in tcp_validate_incoming

Followup of commit 0c24604b68fc (tcp: implement RFC 5961 4.2)

As reported by Vijay Subramanian, we should send a challenge ACK
instead of a dup ack if a SYN flag is set on a packet received out of
window.

This permits the ratelimiting to work as intended, and to increase
correct SNMP counters.

Suggested-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Cc: Kiran Kumar Kella <kkiran@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding: refine IFF_XMIT_DST_RELEASE capability
Eric Dumazet [Tue, 17 Jul 2012 12:19:48 +0000]
bonding: refine IFF_XMIT_DST_RELEASE capability

Some workloads greatly benefit of IFF_XMIT_DST_RELEASE capability
on output net device, avoiding dirtying dst refcount.

bonding currently disables IFF_XMIT_DST_RELEASE unconditionally.

If all slaves have the IFF_XMIT_DST_RELEASE bit set, then
bonding master can also have it in its priv_flags

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: qmi_wwan: make dynamic device IDs work
Bjørn Mork [Tue, 17 Jul 2012 11:14:32 +0000]
net: qmi_wwan: make dynamic device IDs work

The usbnet API use the device ID table to store a pointer to
a minidriver. Setting a generic pointer for dynamic device
IDs will in most cases make them work as expected.  usbnet
will otherwise treat the dynamic IDs as blacklisted. That is
rarely useful.

There is no standard class describing devices supported by
this driver, and most vendors don't even provide enough
information to allow vendor specific wildcard matching. The
result is that most of the supported devices must be
explicitly listed in the device table.  Allowing dynamic IDs
to work both simplifies testing and verification of new
devices, and provides a way for end users to use a device
before the ID is added to the driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agob44: add 64 bit stats
Kevin Groeneveld [Tue, 17 Jul 2012 17:46:01 +0000]
b44: add 64 bit stats

Add support for 64 bit stats to Broadcom b44 ethernet driver.

Signed-off-by: Kevin Groeneveld <kgroeneveld@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobe2net: Ignore physical link async event for Lancer
Padmanabh Ratnakar [Wed, 18 Jul 2012 02:52:15 +0000]
be2net: Ignore physical link async event for Lancer

The ability of driver to transmit packets depends on logical state
of the link. Ignore physical link status.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobe2net: Fix VF driver load for Lancer
Padmanabh Ratnakar [Wed, 18 Jul 2012 02:51:58 +0000]
be2net: Fix VF driver load for Lancer

Lancer FW has added new capability checks for VFs.
Driver should only use those capabilities which are allowed for VFs.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Wed, 18 Jul 2012 16:28:11 +0000]
Merge git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: always update the inode cache with the results from a FIND_*
  cifs: when CONFIG_HIGHMEM is set, serialize the read/write kmaps
  cifs: on CONFIG_HIGHMEM machines, limit the rsize/wsize to the kmap space
  Initialise mid_q_entry before putting it on the pending queue

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Wed, 18 Jul 2012 16:20:03 +0000]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

Jerr Kirsher says:

====================
This series contains updates to ixgbe & ixgbevf.
 ...
Alexander Duyck (6):
  ixgbe: Ping the VFs on link status change to trigger link change
  ixgbe: Handle failures in the ixgbe_setup_rx/tx_resources calls
  ixgbe: Move configuration of set_real_num_rx/tx_queues into open
  ixgbe: Update the logic for ixgbe_cache_ring_dcb and DCB RSS
    configuration
  ixgbe: Cleanup logic for MRQC and MTQC configuration
  ixgbevf: Update descriptor macros to accept pointers and drop _ADV
    suffix
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'davem-next.r8169' of git://violet.fr.zoreil.com/romieu/linux
David S. Miller [Wed, 18 Jul 2012 16:10:26 +0000]
Merge branch 'davem-next.r8169' of git://violet.fr.zoreil.com/romieu/linux

Francois Romieu says:

====================
Francois Romieu (1):
      r8169: verbose error message.

Hayes Wang (1):
      r8169: remove rtl_ocpdr_cond.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc...
David S. Miller [Wed, 18 Jul 2012 16:08:36 +0000]
Merge branch 'for-davem' of git://git./linux/kernel/git/bwh/sfc-next

Ben Hutchings says:

====================
1. Fix potential badness when running a self-test with SR-IOV enabled.
2. Fix calculation of some interface statistics that could run backward.
3. Miscellaneous cleanup.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocipso: don't follow a NULL pointer when setsockopt() is called
Paul Moore [Tue, 17 Jul 2012 11:07:47 +0000]
cipso: don't follow a NULL pointer when setsockopt() is called

As reported by Alan Cox, and verified by Lin Ming, when a user
attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL
tag the kernel dies a terrible death when it attempts to follow a NULL
pointer (the skb argument to cipso_v4_validate() is NULL when called via
the setsockopt() syscall).

This patch fixes this by first checking to ensure that the skb is
non-NULL before using it to find the incoming network interface.  In
the unlikely case where the skb is NULL and the user attempts to add
a CIPSO option with the _TAG_LOCAL tag we return an error as this is
not something we want to allow.

A simple reproducer, kindly supplied by Lin Ming, although you must
have the CIPSO DOI #3 configure on the system first or you will be
caught early in cipso_v4_validate():

#include <sys/types.h>
#include <sys/socket.h>
#include <linux/ip.h>
#include <linux/in.h>
#include <string.h>

struct local_tag {
char type;
char length;
char info[4];
};

struct cipso {
char type;
char length;
char doi[4];
struct local_tag local;
};

int main(int argc, char **argv)
{
int sockfd;
struct cipso cipso = {
.type = IPOPT_CIPSO,
.length = sizeof(struct cipso),
.local = {
.type = 128,
.length = sizeof(struct local_tag),
},
};

memset(cipso.doi, 0, 4);
cipso.doi[3] = 3;

sockfd = socket(AF_INET, SOCK_DGRAM, 0);
#define SOL_IP 0
setsockopt(sockfd, SOL_IP, IP_OPTIONS,
&cipso, sizeof(struct cipso));

return 0;
}

CC: Lin Ming <mlin@ss.pku.edu.cn>
Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: fix inet6_csk_xmit()
Eric Dumazet [Tue, 17 Jul 2012 21:38:04 +0000]
ipv6: fix inet6_csk_xmit()

We should provide to inet6_csk_route_socket a struct flowi6 pointer,
so that net6_csk_xmit() works correctly instead of sending garbage.

Also add some consts

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoext4: fix duplicated mnt_drop_write call in EXT4_IOC_MOVE_EXT
Al Viro [Wed, 18 Jul 2012 08:31:36 +0000]
ext4: fix duplicated mnt_drop_write call in EXT4_IOC_MOVE_EXT

Caused, AFAICS, by mismerge in commit ff9cb1c4eead ("Merge branch
'for_linus' into for_linus_merged")

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-3.5-spear-fixes' of http://git.stlinux.com/spear/linux-2.6 into...
Olof Johansson [Wed, 18 Jul 2012 05:43:53 +0000]
Merge branch 'for-3.5-spear-fixes' of git.stlinux.com/spear/linux-2.6 into fixes

* 'for-3.5-spear-fixes' of http://git.stlinux.com/spear/linux-2.6:
  ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi
  ARM: dts: SPEAr320: Boot the board in EXTENDED_MODE
  ARM: dts: SPEAr320: Fix compatible string
  Clk: SPEAr1340: Update sys clock parent array
  clk: SPEAr1340: Fix clk enable register for uart1 and i2c1.
  ARM: SPEAr13xx: Fix Interrupt bindings
  Clk:spear6xx:Fix: Rename clk ids within predefined limit
  Clk:spear3xx:Fix: Rename clk ids within predefined limit
  clk:spear1310:Fix: Rename clk ids within predefined limit
  clk:spear1340:Fix: Rename clk ids within predefined limit

8 years agoARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi
Stefan Roese [Fri, 11 May 2012 08:41:01 +0000]
ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

8 years agoARM: dts: SPEAr320: Boot the board in EXTENDED_MODE
Vipul Kumar Samar [Fri, 13 Jul 2012 11:52:11 +0000]
ARM: dts: SPEAr320: Boot the board in EXTENDED_MODE

On spear320 device supported mode are:

   * AUTO_NET_SMII_MODE
   * AUTO_NET_MII_MODE
   * AUTO_EXP_MODE
   * SMALL_PRINTERS_MODE
   * EXTENDED_MODE

spear320-evb board is designed for EXTENDED_MODE only, hence it does not
boot correctly in current form where pinctrl part for some devices fail.

Configure and boot the SPEAr320 evaluation board in EXTENDED_MODE.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

8 years agoARM: dts: SPEAr320: Fix compatible string
Vipul Kumar Samar [Fri, 13 Jul 2012 11:50:46 +0000]
ARM: dts: SPEAr320: Fix compatible string

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

8 years agoClk: SPEAr1340: Update sys clock parent array
Vipul Kumar Samar [Fri, 6 Jul 2012 10:22:36 +0000]
Clk: SPEAr1340: Update sys clock parent array

sys_clk has multiple parents and selection of parent depends on sys_clk_ctrl
register bit no. 23:25, with following possibilities

   0XX: pll1_clk
   10X: sys_synth_clk
   110: pll2_clk
   111: pll3_clk

Out of several possibilities (h/w wise) to select same clock parent for
sys_clk, current clock implementation was considering just one value.

When bootloader programmed different (valid) value to select a clock
parent then Linux breaks.

Here, we try to include all possibilities which can lead to same
clock selection thus making Linux independent of bootloader selection
values.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

8 years agoclk: SPEAr1340: Fix clk enable register for uart1 and i2c1.
Vipul Kumar Samar [Wed, 4 Jul 2012 10:52:19 +0000]
clk: SPEAr1340: Fix clk enable register for uart1 and i2c1.

This patch is to fix typing mistake of clk enable register of i2c1 and
uart1.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

8 years agoARM: SPEAr13xx: Fix Interrupt bindings
Vipul Kumar Samar [Wed, 4 Jul 2012 10:52:17 +0000]
ARM: SPEAr13xx: Fix Interrupt bindings

   - Correct interrupt bindings for uart, ethernet and pmu.
   - Added interrupt binding for keyboard.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

8 years agoClk:spear6xx:Fix: Rename clk ids within predefined limit
Vipul Kumar Samar [Tue, 10 Jul 2012 11:42:46 +0000]
Clk:spear6xx:Fix: Rename clk ids within predefined limit

The max limit of con_id is 16 and dev_id is 20. As of now for spear6xx, many clk
ids are exceeding this predefined limit.

This patch is intended to rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    ras_gen1_synth_gate_clk -> ras_syn1_gclk
    pll3_48m -> pll3_

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

8 years agoClk:spear3xx:Fix: Rename clk ids within predefined limit
Vipul Kumar Samar [Tue, 10 Jul 2012 11:42:45 +0000]
Clk:spear3xx:Fix: Rename clk ids within predefined limit

The max limit of con_id is 16 and dev_id is 20. As of now for spear3xx, many clk
ids are exceeding this predefined limit.

This patch is intended to rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    ras_gen1_synth_gate_clk -> ras_syn1_gclk
    ras_pll3_48m -> ras_pll3_
    pll3_48m -> pll3_

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

8 years agoclk:spear1310:Fix: Rename clk ids within predefined limit
Vipul Kumar Samar [Tue, 10 Jul 2012 11:42:44 +0000]
clk:spear1310:Fix: Rename clk ids within predefined limit

The max limit of con_id is 16 and dev_id is 20. As of now for spear1310, many
clk ids are exceeding this predefined limit.

This patch is intended to rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    gmac_phy -> phy_
    gmii_125m_pad -> gmii_pad

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

8 years agoclk:spear1340:Fix: Rename clk ids within predefined limit
Vipul Kumar Samar [Tue, 10 Jul 2012 11:42:43 +0000]
clk:spear1340:Fix: Rename clk ids within predefined limit

The max limit of con_id is 16 and dev_id is 20. As of now for spear1340, many
clk ids are exceeding this predefined limit.

This patch rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    gmac_phy -> phy_
    gmii_125m_pad_ -> gmii_pad

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

8 years agoixgbevf: Update descriptor macros to accept pointers and drop _ADV suffix
Alexander Duyck [Fri, 11 May 2012 08:33:00 +0000]
ixgbevf: Update descriptor macros to accept pointers and drop _ADV suffix

This change updates the descriptor macros to accept pointers, updates the
name to drop the _ADV suffix, and include the IXGBEVF name in the macro.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Cleanup logic for MRQC and MTQC configuration
Alexander Duyck [Fri, 18 May 2012 06:34:02 +0000]
ixgbe: Cleanup logic for MRQC and MTQC configuration

This change is meant to make the code much more readable for MTQC and MRQC
configuration.

The big change is that I simplified much of the logic so that we are
essentially handling just 4 cases and their variants. In the cases where
RSS is disabled we are actually just programming the RETA table with all
1s resulting in a single queue RSS. In the case of SR-IOV I am treating
that as a subset of VMDq. This all results int he following configuration
for the hardware:
         DCB
         En       Dis
VMDq En  VMDQ/DCB VMDq/RSS
     Dis DCB/RSS  RSS

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Update the logic for ixgbe_cache_ring_dcb and DCB RSS configuration
Alexander Duyck [Fri, 22 Jun 2012 06:46:33 +0000]
ixgbe: Update the logic for ixgbe_cache_ring_dcb and DCB RSS configuration

This change cleans up some of the logic in an attempt to try and simplify
things for how we are configuring DCB w/ RSS.

In this patch I basically did 3 things.  I updated the logic for getting
the first register index.  I applied the fact that all TCs get the same
number of queues to simplify the looping logic in caching the DCB ring
register.  Finally I updated how we configure the RQTC register to match
the fact that all TCs are assigned the same number of queues.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Move configuration of set_real_num_rx/tx_queues into open
Alexander Duyck [Thu, 12 Jul 2012 05:52:53 +0000]
ixgbe: Move configuration of set_real_num_rx/tx_queues into open

It makes much more sense for us to configure the real number of Tx and Rx
queues in the ixgbe_open call than it does in ixgbe_set_num_queues.  By
setting the number in ixgbe_open we can avoid a number of unecessary
updates and only have to make the calls once.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Handle failures in the ixgbe_setup_rx/tx_resources calls
Alexander Duyck [Fri, 18 May 2012 06:33:47 +0000]
ixgbe: Handle failures in the ixgbe_setup_rx/tx_resources calls

Previously we were exiting without cleaning up the memory internally on the
ixgbe_setup_rx_resources and ixgbe_setup_tx_resources calls.  Instead of
forcing the caller to clean things up for us we should instead just unwind
the rings and free the memory as we go.  This way we can more gracefully
clean up the rings in the event of an allocation failure.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

8 years agoixgbe: Ping the VFs on link status change to trigger link change
Alexander Duyck [Sat, 5 May 2012 05:30:38 +0000]
ixgbe: Ping the VFs on link status change to trigger link change

When the link status changes on the PF we need to notify the VFs. In order
to do this we should ping all of the VFs in order to trigger a link status
change on them as well.

This fixes issues in which the PF would reset, but the VF didn't because the
NAK flag was not set in the VF mailbox.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>