select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
select HAVE_IRQ_WORK
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select ARCH_DISCARD_MEMBLOCK
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_FRAME_POINTERS
select HAVE_DMA_ATTRS
select ANON_INODES
select HAVE_ARCH_KMEMCHECK
select HAVE_USER_RETURN_NOTIFIER
+ select ARCH_BINFMT_ELF_RANDOMIZE_PIE
select HAVE_ARCH_JUMP_LABEL
select HAVE_TEXT_POKE_SMP
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
+ select SPARSE_IRQ
select GENERIC_FIND_FIRST_BIT
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
select GENERIC_IRQ_SHOW
+ select GENERIC_CLOCKEVENTS_MIN_ADJUST
select IRQ_FORCED_THREADING
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_BPF_JIT if (X86_64 && NET)
+ select CLKEVT_I8253
+ select ARCH_HAVE_NMI_SAFE_CMPXCHG
+ select GENERIC_IOMAP
config INSTRUCTION_DECODER
def_bool (KPROBES || PERF_EVENTS)
config GENERIC_CLOCKEVENTS
def_bool y
+config ARCH_CLOCKSOURCE_DATA
+ def_bool y
+ depends on X86_64
+
config GENERIC_CLOCKEVENTS_BROADCAST
def_bool y
depends on X86_64 || (X86_32 && X86_LOCAL_APIC)
bool
config NEED_DMA_MAP_STATE
- def_bool (X86_64 || DMAR || DMA_API_DEBUG)
+ def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG)
config NEED_SG_DMA_LENGTH
def_bool y
config GENERIC_ISA_DMA
def_bool ISA_DMA_API
-config GENERIC_IOMAP
- def_bool y
-
config GENERIC_BUG
def_bool y
depends on BUG
config NEED_PER_CPU_PAGE_FIRST_CHUNK
def_bool y
-config HAVE_CPUMASK_OF_CPU_MAP
- def_bool X86_64_SMP
-
config ARCH_HIBERNATION_POSSIBLE
def_bool y
bool
default X86_64
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
config AUDIT_ARCH
bool
default X86_64
config HAVE_INTEL_TXT
def_bool y
- depends on EXPERIMENTAL && DMAR && ACPI
+ depends on EXPERIMENTAL && INTEL_IOMMU && ACPI
config X86_32_SMP
def_bool y
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
- See also <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
config X86_X2APIC
bool "Support x2apic"
- depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP
+ depends on X86_LOCAL_APIC && X86_64 && IRQ_REMAP
---help---
This enables x2apic support on CPUs that have this feature.
If you enable this option then you'll be able to select support
for the following (non-PC) 64 bit x86 platforms:
+ Numascale NumaChip
ScaleMP vSMP
SGI Ultraviolet
endif
# This is an alphabetically sorted list of 64 bit extended platforms
# Please maintain the alphabetic order if and when there are additions
+config X86_NUMACHIP
+ bool "Numascale NumaChip"
+ depends on X86_64
+ depends on X86_EXTENDED_PLATFORM
+ depends on NUMA
+ depends on SMP
+ depends on X86_X2APIC
+ depends on !EDAC_AMD64
+ ---help---
+ Adds support for Numascale NumaChip large-SMP systems. Needed to
+ enable more than ~168 cores.
+ If you don't have one of these, you should say N here.
config X86_VSMP
bool "ScaleMP vSMP"
This option compiles in support for the CE4100 SOC for settop
boxes and media devices.
+config X86_WANT_INTEL_MID
+ bool "Intel MID platform support"
+ depends on X86_32
+ depends on X86_EXTENDED_PLATFORM
+ ---help---
+ Select to build a kernel capable of supporting Intel MID platform
+ systems which do not have the PCI legacy interfaces (Moorestown,
+ Medfield). If you are building for a PC class system say N here.
+
+if X86_WANT_INTEL_MID
+
+config X86_INTEL_MID
+ bool
+
config X86_MRST
bool "Moorestown MID platform"
depends on PCI
depends on PCI_GOANY
- depends on X86_32
- depends on X86_EXTENDED_PLATFORM
depends on X86_IO_APIC
select APB_TIMER
select I2C
select SPI
select INTEL_SCU_IPC
select X86_PLATFORM_DEVICES
+ select X86_INTEL_MID
---help---
Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
Internet Device(MID) platform. Moorestown consists of two chips:
nor standard legacy replacement devices/features. e.g. Moorestown does
not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
+endif
+
config X86_RDC321X
bool "RDC R-321x SoC"
depends on X86_32
if PARAVIRT_GUEST
+config PARAVIRT_TIME_ACCOUNTING
+ bool "Paravirtual steal time accounting"
+ select PARAVIRT
+ default n
+ ---help---
+ Select this option to enable fine granularity task steal time
+ accounting. Time spent executing other tasks in parallel with
+ the current vCPU is discounted from the vCPU power. To account for
+ that, there can be a small performance impact.
+
+ If in doubt, say N here.
+
source "arch/x86/xen/Kconfig"
config KVM_CLOCK
config APB_TIMER
def_bool y if MRST
prompt "Langwell APB Timer Support" if X86_MRST
+ select DW_APB_TIMER
help
APB timer is the replacement for 8254, HPET on X86 MID platforms.
The APBT provides a stable time base on SMP
Calgary anyway, pass 'iommu=calgary' on the kernel command line.
If unsure, say Y.
-config AMD_IOMMU
- bool "AMD IOMMU support"
- select SWIOTLB
- select PCI_MSI
- select PCI_IOV
- depends on X86_64 && PCI && ACPI
- ---help---
- With this option you can enable support for AMD IOMMU hardware in
- your system. An IOMMU is a hardware component which provides
- remapping of DMA memory accesses from devices. With an AMD IOMMU you
- can isolate the the DMA memory of different devices and protect the
- system from misbehaving device drivers or hardware.
-
- You can find out if your system has an AMD IOMMU if you look into
- your BIOS for an option to enable it or if you have an IVRS ACPI
- table.
-
-config AMD_IOMMU_STATS
- bool "Export AMD IOMMU statistics to debugfs"
- depends on AMD_IOMMU
- select DEBUG_FS
- ---help---
- This option enables code in the AMD IOMMU driver to collect various
- statistics about whats happening in the driver and exports that
- information to userspace via debugfs.
- If unsure, say N.
-
# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
def_bool y if X86_64
config IOMMU_HELPER
def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
-config IOMMU_API
- def_bool (AMD_IOMMU || DMAR)
-
config MAXSMP
bool "Enable Maximum number of SMP Processors and NUMA Nodes"
depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
config AMD_NUMA
def_bool y
prompt "Old style AMD Opteron NUMA detection"
- depends on NUMA && PCI
+ depends on X86_64 && NUMA && PCI
---help---
Enable AMD NUMA node topology detection. You should say Y here if
you have a multi processor AMD system. This uses an old method to
def_bool y
depends on X86_PAT
+config ARCH_RANDOM
+ def_bool y
+ prompt "x86 architectural random number generator" if EXPERT
+ ---help---
+ Enable the x86 architectural RDRAND instruction
+ (Intel Bull Mountain technology) to generate random numbers.
+ If supported, this is a high bandwidth, cryptographically
+ secure hardware random number generator.
+
config EFI
bool "EFI runtime service support"
depends on ACPI
config X86_APM_BOOT
def_bool y
- depends on APM || APM_MODULE
+ depends on APM
menuconfig APM
tristate "APM (Advanced Power Management) BIOS support"
machines with more than one CPU.
In order to use APM, you will need supporting software. For location
- and more information, read <file:Documentation/power/pm.txt> and the
- Battery Powered Linux mini-HOWTO, available from
+ and more information, read <file:Documentation/power/apm-acpi.txt>
+ and the Battery Powered Linux mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver does not spin down disk drives (see the hdparm(8)
You should say N unless you know you need this.
-config DMAR
- bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
- depends on PCI_MSI && ACPI && EXPERIMENTAL
- help
- DMA remapping (DMAR) devices support enables independent address
- translations for Direct Memory Access (DMA) from devices.
- These DMA remapping devices are reported via ACPI tables
- and include PCI device scope covered by these DMA
- remapping devices.
-
-config DMAR_DEFAULT_ON
- def_bool y
- prompt "Enable DMA Remapping Devices by default"
- depends on DMAR
- help
- Selecting this option will enable a DMAR device at boot time if
- one is found. If this option is not selected, DMAR support can
- be enabled by passing intel_iommu=on to the kernel. It is
- recommended you say N here while the DMAR code remains
- experimental.
-
-config DMAR_BROKEN_GFX_WA
- bool "Workaround broken graphics drivers (going away soon)"
- depends on DMAR && BROKEN
- ---help---
- Current Graphics drivers tend to use physical address
- for DMA and avoid using DMA APIs. Setting this config
- option permits the IOMMU driver to set a unity map for
- all the OS-visible memory. Hence the driver can continue
- to use physical addresses for DMA, at least until this
- option is removed in the 2.6.32 kernel.
-
-config DMAR_FLOPPY_WA
- def_bool y
- depends on DMAR
- ---help---
- Floppy disk drivers are known to bypass DMA API calls
- thereby failing to work when IOMMU is enabled. This
- workaround will setup a 1:1 mapping for the first
- 16MiB to make floppy (an ISA device) work.
-
-config INTR_REMAP
- bool "Support for Interrupt Remapping (EXPERIMENTAL)"
- depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
- ---help---
- Supports Interrupt remapping for IO-APIC and MSI devices.
- To use x2apic mode in the CPU's which support x2APIC enhancements or
- to support platforms with CPU's having > 8 bit APIC ID, say Y.
-
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
Add support for detecting the unique features of the OLPC
XO hardware.
-config OLPC_XO1
- tristate "OLPC XO-1 support"
- depends on OLPC && MFD_CS5535
+config OLPC_XO1_PM
+ bool "OLPC XO-1 Power Management"
+ depends on OLPC && MFD_CS5535 && PM_SLEEP
+ select MFD_CORE
+ ---help---
+ Add support for poweroff and suspend of the OLPC XO-1 laptop.
+
+config OLPC_XO1_RTC
+ bool "OLPC XO-1 Real Time Clock"
+ depends on OLPC_XO1_PM && RTC_DRV_CMOS
+ ---help---
+ Add support for the XO-1 real time clock, which can be used as a
+ programmable wakeup source.
+
+config OLPC_XO1_SCI
+ bool "OLPC XO-1 SCI extras"
+ depends on OLPC && OLPC_XO1_PM
+ select POWER_SUPPLY
+ select GPIO_CS5535
+ select MFD_CORE
+ ---help---
+ Add support for SCI-based features of the OLPC XO-1 laptop:
+ - EC-driven system wakeups
+ - Power button
+ - Ebook switch
+ - Lid switch
+ - AC adapter status updates
+ - Battery status updates
+
+config OLPC_XO15_SCI
+ bool "OLPC XO-1.5 SCI extras"
+ depends on OLPC && ACPI
+ select POWER_SUPPLY
+ ---help---
+ Add support for SCI-based features of the OLPC XO-1.5 laptop:
+ - EC-driven system wakeups
+ - AC adapter status updates
+ - Battery status updates
+
+config ALIX
+ bool "PCEngines ALIX System Support (LED setup)"
+ select GPIOLIB
---help---
- Add support for non-essential features of the OLPC XO-1 laptop.
+ This option enables system support for the PCEngines ALIX.
+ At present this just sets up LEDs for GPIO control on
+ ALIX2/3/6 boards. However, other system specific setup should
+ get added here.
+
+ Note: You must still enable the drivers for GPIO and LED support
+ (GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs
+
+ Note: You have to set alix.force=1 for boards with Award BIOS.
endif # X86_32
Code Review / linux-3.10.git / blobdiff