bool
default y
-config UID16
- bool
-
config GENERIC_HARDIRQS
bool
default y
bool
default y
-config GENERIC_CALIBRATE_DELAY
+config ARCH_HAS_ILOG2_U32
bool
default y
-config HAVE_DEC_LOCK
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
bool
default y
bool
default y
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
config SCHED_NO_NO_OMIT_FRAME_POINTER
bool
default y
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+ default y
+
+config GENERIC_BUG
+ bool
+ default y
+ depends on BUG
+
source "init/Kconfig"
menu "Processor"
select PPC_FPU
help
There are four types of PowerPC chips supported. The more common
- types (601, 603, 604, 740, 750, 7400), the Motorola embedded
- versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded
- versions (403 and 405) and the high end 64 bit Power processors
- (POWER 3, POWER4, and IBM 970 also known as G5)
+ types (601, 603, 604, 740, 750, 7400), the older Freescale
+ (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
+ 52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and
+ the Book E embedded processors from IBM (44x) and Freescale (85xx).
+ For support for 64-bit processors, set ARCH=powerpc.
Unless you are building a kernel for one of the embedded processor
- systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
- Note that the kernel runs in 32-bit mode even on 64-bit chips.
- Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
- specific support for that chipset is asked later on.
+ systems, choose 6xx.
+ Also note that because the 52xx, 82xx, & 83xx family have a 603e
+ core, specific support for that chipset is asked later on.
config 40x
bool "40x"
+ select PPC_DCR_NATIVE
config 44x
bool "44x"
-
-config POWER3
- select PPC_FPU
- bool "POWER3"
-
-config POWER4
- select PPC_FPU
- bool "POWER4 and 970 (G5)"
+ select PPC_DCR_NATIVE
config 8xx
- depends on BROKEN
bool "8xx"
+config E200
+ bool "e200"
+
config E500
bool "e500"
config PPC_FPU
bool
+config PPC_DCR_NATIVE
+ bool
+ default n
+
+config PPC_DCR
+ bool
+ depends on PPC_DCR_NATIVE
+ default y
+
config BOOKE
bool
- depends on E500
+ depends on E200 || E500
default y
config FSL_BOOKE
bool
- depends on E500
+ depends on E200 || E500
default y
config PTE_64BIT
config ALTIVEC
bool "AltiVec Support"
- depends on 6xx || POWER4
+ depends on 6xx
depends on !8260 && !83xx
---help---
This option enables kernel support for the Altivec extensions to the
config SPE
bool "SPE Support"
- depends on E500
+ depends on E200 || E500
---help---
This option enables kernel support for the Signal Processing
Extensions (SPE) to the PowerPC processor. The kernel currently
supports saving and restoring SPE registers, and turning on the
'spe enable' bit so user processes can execute SPE instructions.
- This option is only usefully if you have a processor that supports
+ This option is only useful if you have a processor that supports
SPE (e500, otherwise known as 85xx series), but does not have any
- affect on a non-spe cpu (it does, however add code to the kernel).
+ effect on a non-spe cpu (it does, however add code to the kernel).
If in doubt, say Y here.
config MATH_EMULATION
bool "Math emulation"
- depends on 4xx || 8xx || E500
+ depends on 4xx || 8xx || E200 || E500
---help---
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
here. Saying Y here will not hurt performance (on any machine) but
will increase the size of the kernel.
-source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_PMAC
- bool "Support for Apple PowerBooks"
- depends on CPU_FREQ && ADB_PMU
- select CPU_FREQ_TABLE
+config KEXEC
+ bool "kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
help
- This adds support for frequency switching on Apple PowerBooks,
- this currently includes some models of iBook & Titanium
- PowerBook.
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is independent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
+ In the GameCube implementation, kexec allows you to load and
+ run DOL files, including kernel and homebrew DOLs.
+
+source "drivers/cpufreq/Kconfig"
config PPC601_SYNC_FIX
bool "Workarounds for PPC601 bugs"
- depends on 6xx && (PPC_PREP || PPC_PMAC)
+ depends on 6xx && PPC_PREP
help
Some versions of the PPC601 (the first PowerPC chip) have bugs which
mean that extra synchronization instructions are required near
source arch/ppc/platforms/4xx/Kconfig
source arch/ppc/platforms/85xx/Kconfig
-config PPC64BRIDGE
- bool
- depends on POWER3 || POWER4
- default y
-
config PPC_STD_MMU
bool
- depends on 6xx || POWER3 || POWER4
+ depends on 6xx
default y
config NOT_COHERENT_CACHE
bool
- depends on 4xx || 8xx
+ depends on 4xx || 8xx || E200
default y
endmenu
menu "Platform options"
+config FADS
+ bool
+
choice
prompt "8xx Machine Type"
depends on 8xx
End of life: end 2000 ?
URL: see TQM850L
- SPD823TS:
- MPC823 based board used in the "Tele Server" product
- Manufacturer: Speech Design, <http://www.speech-design.de/>
- Date of Release: Mid 2000 (?)
- End of life: -
- URL: <http://www.speech-design.de/>
- select "English", then "Teleteam Solutions", then "TeleServer"
-
IVMS8:
MPC860 based board used in the "Integrated Voice Mail System",
Small Version (8 voice channels)
End of life: -
URL: <http://www.speech-design.de/>
- SM850:
- Service Module (based on TQM850L)
- Manufacturer: Dependable Computer Systems, <http://www.decomsys.com/>
- Date of Release: end 2000 (?)
- End of life: mid 2001 (?)
- URL: <http://www.tz-mikroelektronik.de/ServiceModule/index.html>
-
HERMES:
Hermes-Pro ISDN/LAN router with integrated 8 x hub
Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
controller, and two RS232 ports.
-config FADS
+config MPC8XXFADS
bool "FADS"
+ select FADS
+
+config MPC86XADS
+ bool "MPC86XADS"
+ help
+ MPC86x Application Development System by Freescale Semiconductor.
+ The MPC86xADS is meant to serve as a platform for s/w and h/w
+ development around the MPC86X processor families.
+ select FADS
+
+config MPC885ADS
+ bool "MPC885ADS"
+ help
+ Freescale Semiconductor MPC885 Application Development System (ADS).
+ Also known as DUET.
+ The MPC885ADS is meant to serve as a platform for s/w and h/w
+ development around the MPC885 processor family.
config TQM823L
bool "TQM823L"
config FPS850L
bool "FPS850L"
-config SPD823TS
- bool "SPD823TS"
- help
- Say Y here to support the Speech Design 823 Tele-Server from Speech
- Design, released in 2000. The manufacturer's website is at
- <http://www.speech-design.de/>.
-
config IVMS8
bool "IVMS8"
help
from Speech Design, released March 2001. The manufacturer's website
is at <http://www.speech-design.de/>.
-config SM850
- bool "SM850"
- help
- Say Y here to support the Service Module 850 from Dependable
- Computer Systems, an SBC based on the TQM850L module by TQ
- Components. This board is no longer in production. The
- manufacturer's website is at <http://www.decomsys.com/>.
-
config HERMES_PRO
bool "HERMES"
endchoice
+menu "Freescale Ethernet driver platform-specific options"
+ depends on FS_ENET
+
+ config MPC8xx_SECOND_ETH
+ bool "Second Ethernet channel"
+ depends on (MPC885ADS || MPC86XADS)
+ default y
+ help
+ This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
+ The latter will use SCC1, for 885ADS you can select it below.
+
+ choice
+ prompt "Second Ethernet channel"
+ depends on MPC8xx_SECOND_ETH
+ default MPC8xx_SECOND_ETH_FEC2
+
+ config MPC8xx_SECOND_ETH_FEC2
+ bool "FEC2"
+ depends on MPC885ADS
+ help
+ Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
+ (often 2-nd UART) will not work if this is enabled.
+
+ config MPC8xx_SECOND_ETH_SCC1
+ bool "SCC1"
+ depends on MPC86XADS
+ select MPC8xx_SCC_ENET_FIXED
+ help
+ Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1
+ (often 1-nd UART) will not work if this is enabled.
+
+ config MPC8xx_SECOND_ETH_SCC3
+ bool "SCC3"
+ depends on MPC885ADS
+ help
+ Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
+ (often 1-nd UART) will not work if this is enabled.
+
+ endchoice
+
+ config MPC8xx_SCC_ENET_FIXED
+ depends on MPC8xx_SECOND_ETH_SCC
+ default n
+ bool "Use fixed MII-less mode for SCC Ethernet"
+
+endmenu
+
choice
prompt "Machine Type"
- depends on 6xx || POWER3 || POWER4
- default PPC_MULTIPLATFORM
+ depends on 6xx
+ default PPC_PREP
---help---
Linux currently supports several different kinds of PowerPC-based
machines: Apple Power Macintoshes and clones (such as the Motorola
Platform) machines (including all of the recent IBM RS/6000 and
pSeries machines), and several embedded PowerPC systems containing
4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
- default option is to build a kernel which works on the first three.
+ default option is to build a kernel which works on PReP.
+
+ Note that support for Apple and CHRP machines is now only available
+ with ARCH=powerpc, and has been removed from this menu. If you
+ wish to build a kernel for an Apple or CHRP machine, exit this
+ configuration process and re-run it with ARCH=powerpc.
- Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or
- pSeries machine, a Power Macintosh (including iMacs, iBooks and
- Powerbooks), or a PReP machine.
+ Select PReP if configuring for a PReP machine.
Select Gemini if configuring for a Synergy Microsystems' Gemini
series Single Board Computer. More information is available at:
Select APUS if configuring for a PowerUP Amiga. More information is
available at: <http://linux-apus.sourceforge.net/>.
-config PPC_MULTIPLATFORM
- bool "CHRP/PowerMac/PReP"
+config PPC_PREP
+ bool "PReP"
config APUS
bool "Amiga-APUS"
+ depends on BROKEN
help
Select APUS if configuring for a PowerUP Amiga.
More information is available at:
help
Select CPCI690 if configuring a Force CPCI690 cPCI board.
-config PCORE
- bool "Force-PowerCore"
-
config POWERPMC250
bool "Force-PowerPMC250"
config SPRUCE
bool "IBM-Spruce"
+ select PPC_INDIRECT_PCI
config HDPU
bool "Sky-HDPU"
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
config LOPEC
bool "Motorola-LoPEC"
-
-config MCPN765
- bool "Motorola-MCPN765"
+ select PPC_I8259
config MVME5100
bool "Motorola-MVME5100"
+ select PPC_INDIRECT_PCI
config PPLUS
bool "Motorola-PowerPlus"
+ select PPC_I8259
+ select PPC_INDIRECT_PCI
config PRPMC750
bool "Motorola-PrPMC750"
+ select PPC_INDIRECT_PCI
config PRPMC800
bool "Motorola-PrPMC800"
+ select PPC_INDIRECT_PCI
config SANDPOINT
bool "Motorola-Sandpoint"
+ select PPC_I8259
help
Select SANDPOINT if configuring for a Motorola Sandpoint X3
(any flavor).
config RADSTONE_PPC7D
bool "Radstone Technology PPC7D board"
-
-config ADIR
- bool "SBS-Adirondack"
-
-config K2
- bool "SBS-K2"
+ select PPC_I8259
config PAL4
bool "SBS-Palomar4"
-config GEMINI
- bool "Synergy-Gemini"
- help
- Select Gemini if configuring for a Synergy Microsystems' Gemini
- series Single Board Computer. More information is available at:
- <http://www.synergymicro.com/PressRel/97_10_15.html>.
-
config EST8260
bool "EST8260"
---help---
much but it's only been tested on this board version. I think this
board is also known as IceCube.
+config LITE5200B
+ bool "Freescale LITE5200B"
+ depends on LITE5200
+ help
+ Support for the LITE5200B dev board for the MPC5200 from Freescale.
+ This is the new board with 2 PCI slots.
+
config MPC834x_SYS
bool "Freescale MPC834x SYS"
help
This option enables support for the MPC 834x SYS evaluation board.
+ Be aware that PCI buses can only function when SYS board is plugged
+ into the PIB (Platform IO Board) board from Freescale which provide
+ 3 PCI slots. The PIBs PCI initialization is the bootloader's
+ responsibility.
+
+config EV64360
+ bool "Marvell-EV64360BP"
+ help
+ Select EV64360 if configuring a Marvell EV64360BP Evaluation
+ platform.
endchoice
config PQ2ADS
config TQM8xxL
bool
- depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L || SM850)
+ depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
default y
config EMBEDDEDBOOT
bool
default y if MPC834x_SYS
+config PPC_83xx
+ bool
+ default y if 83xx
+
+config CPM1
+ bool
+ depends on 8xx
+ default y
+ help
+ The CPM1 (Communications Processor Module) is a coprocessor on
+ embedded CPUs made by Motorola. Selecting this option means that
+ you wish to build a kernel for a machine with a CPM1 coprocessor
+ on it (8xx, 827x, 8560).
+
config CPM2
bool
depends on 8260 || MPC8560 || MPC8555
you wish to build a kernel for a machine with a CPM2 coprocessor
on it (826x, 827x, 8560).
-config PPC_CHRP
- bool
- depends on PPC_MULTIPLATFORM
- default y
-
-config PPC_PMAC
- bool
- depends on PPC_MULTIPLATFORM
- default y
-
-config PPC_PMAC64
- bool
- depends on PPC_PMAC && POWER4
- default y
-
-config PPC_PREP
- bool
- depends on PPC_MULTIPLATFORM
- default y
-
-config PPC_OF
- bool
- depends on PPC_PMAC || PPC_CHRP
- default y
-
config PPC_GEN550
bool
- depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \
- PRPMC750 || K2 || PRPMC800 || LOPEC || \
+ depends on SANDPOINT || SPRUCE || PPLUS || \
+ PRPMC750 || PRPMC800 || LOPEC || \
(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
83xx
default y
config FORCE
bool
- depends on 6xx && (PCORE || POWERPMC250)
+ depends on 6xx && POWERPMC250
default y
config GT64260
config MV64360 # Really MV64360 & MV64460
bool
- depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU
+ depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
default y
config MV64X60
bool
depends on (GT64260 || MV64360)
+ select PPC_INDIRECT_PCI
default y
menu "Set bridge options"
config MPC10X_BRIDGE
bool
- depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
- default y
-
-config FSL_OCP
- bool
- depends on MPC10X_BRIDGE
+ depends on POWERPMC250 || LOPEC || SANDPOINT
+ select PPC_INDIRECT_PCI
default y
config MPC10X_OPENPIC
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
-config CPC710_DATA_GATHERING
- bool "Enable CPC710 data gathering"
- depends on K2
+config SANDPOINT_ENABLE_UART1
+ bool "Enable DUART mode on Sandpoint"
+ depends on SANDPOINT
+ help
+ If this option is enabled then the MPC824x processor will run
+ in DUART mode instead of UART mode.
config HARRIER_STORE_GATHERING
bool "Enable Harrier store gathering"
config MVME5100_IPMC761_PRESENT
bool "MVME5100 configured with an IPMC761"
depends on MVME5100
+ select PPC_I8259
config SPRUCE_BAUD_33M
bool "Spruce baud clock support"
default y if PPC_PREP
config SMP
+ depends on PPC_STD_MMU
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
- depends on SMP
+ depends on SMP && !MV64360
help
This option gives the kernel permission to distribute IRQs across
multiple CPUs. Saying N here will route all IRQs to the first
depends on SMP
default "4"
-config PREEMPT
- bool "Preemptible Kernel"
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
-
- Say Y here if you are building a kernel for a desktop, embedded
- or real-time system. Say N if you are unsure.
-
config HIGHMEM
bool "High memory support"
-source "fs/Kconfig.binfmt"
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
-config PROC_DEVICETREE
- bool "Support for Open Firmware device tree in /proc"
- depends on PPC_OF && PROC_FS
- help
- This option adds a device-tree directory under /proc which contains
- an image of the device tree that the kernel copies from Open
- Firmware. If unsure, say Y here.
+source kernel/Kconfig.hz
+source kernel/Kconfig.preempt
+source "mm/Kconfig"
+
+source "fs/Kconfig.binfmt"
config PREP_RESIDUAL
bool "Support for PReP Residual Data"
source "drivers/zorro/Kconfig"
+if !44x || BROKEN
source kernel/power/Kconfig
+endif
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
config ISA
bool "Support for ISA-bus hardware"
- depends on PPC_PREP || PPC_CHRP
+ depends on PPC_PREP
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
config GENERIC_ISA_DMA
bool
- depends on POWER3 || POWER4 || 6xx && !CPM2
+ depends on 6xx && !CPM2
default y
+config PPC_I8259
+ bool
+ default y if 85xx || PPC_PREP
+ default n
+
+config PPC_INDIRECT_PCI
+ bool
+ depends on PCI
+ default y if 40x || 44x || 85xx || 83xx || PPC_PREP
+ default n
+
config EISA
bool
help
bool
default PCI
+config MPC83xx_PCI2
+ bool "Support for 2nd PCI host controller"
+ depends on PCI && MPC834x
+ default y if MPC834x_SYS
+
config PCI_QSPAN
bool "QSpan PCI"
depends on !4xx && !CPM2 && 8xx
+ select PPC_I8259
help
Say Y here if you have a system based on a Motorola 8xx-series
embedded processor with a QSPAN PCI interface, otherwise say N.
config PCI_8260
bool
- depends on PCI && 8260 && !8272
+ depends on PCI && 8260
+ select PPC_INDIRECT_PCI
default y
config 8260_PCI9
- bool " Enable workaround for MPC826x erratum PCI 9"
- depends on PCI_8260
+ bool "Enable workaround for MPC826x erratum PCI 9"
+ depends on PCI_8260 && !ADS8272
default y
choice
- prompt " IDMA channel for PCI 9 workaround"
+ prompt "IDMA channel for PCI 9 workaround"
depends on 8260_PCI9
config 8260_PCI9_IDMA1
source "drivers/pcmcia/Kconfig"
+config RAPIDIO
+ bool "RapidIO support" if MPC8540 || MPC8560
+ help
+ If you say Y here, the kernel will include drivers and
+ infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/Kconfig"
+
endmenu
menu "Advanced setup"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the base virtual address
- of the the consistent memory pool. This pool of virtual
+ of the consistent memory pool. This pool of virtual
memory is used to make consistent memory allocations.
config CONSISTENT_START
bool "Set custom consistent memory pool size"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
- This option allows you to set the size of the the
+ This option allows you to set the size of the
consistent memory pool. This pool of virtual memory
is used to make consistent memory allocations.
config BOOT_LOAD_BOOL
bool "Set the boot link/load address"
- depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
+ depends on ADVANCED_OPTIONS && !PPC_PREP
help
This option allows you to set the initial load address of the zImage
or zImage.initrd file. This can be useful if you are on a board
depends on ADVANCED_OPTIONS && 8xx
endmenu
+source "net/Kconfig"
+
source "drivers/Kconfig"
source "fs/Kconfig"
source "lib/Kconfig"
-source "arch/ppc/oprofile/Kconfig"
+source "arch/powerpc/oprofile/Kconfig"
source "arch/ppc/Kconfig.debug"
Code Review / linux-3.10.git / blobdiff