select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
+ select ARCH_BINFMT_ELF_RANDOMIZE_PIE
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
select GENERIC_IRQ_SHOW
+ select CPU_PM if (SUSPEND || CPU_IDLE)
+ select GENERIC_PCI_IOMAP
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
+config NEED_MACH_MEMORY_H
+ bool
+ help
+ Select this when mach/memory.h is required to provide special
+ definitions for this platform. The need for mach/memory.h should
+ be avoided when possible.
+
+config PHYS_OFFSET
+ hex "Physical address of main memory" if MMU
+ depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+ default DRAM_BASE if !MMU
+ help
+ Please provide the physical address corresponding to the
+ location of main memory in your system.
config GENERIC_BUG
def_bool y
select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
+ select HAVE_TCM
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
+ select NEED_MACH_MEMORY_H
help
Support for ARM's Integrator platform.
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
+ select NEED_MACH_MEMORY_H
help
This enables support for ARM Ltd RealView boards.
help
Support for Broadcom's BCMRing platform.
+config ARCH_HIGHBANK
+ bool "Calxeda Highbank-based"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select CACHE_L2X0
+ select CLKDEV_LOOKUP
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU
+ select HAVE_SMP
+ select USE_OF
+ help
+ Support for the Calxeda Highbank SoC based boards.
+
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Cirrus Logic 711x/721x based boards.
select CPU_V6K
select GENERIC_CLOCKEVENTS
select ARM_GIC
+ select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
select CPU_V7
- select GENERIC_TIME
select NO_IOPORT
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
+ select MIGHT_HAVE_CACHE_L2X0
select USE_OF
select ZONE_DMA
help
select ISA
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
select FOOTBRIDGE
select GENERIC_CLOCKEVENTS
select HAVE_IDE
+ select NEED_MACH_MEMORY_H
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select HAVE_SCHED_CLOCK
+ select MULTI_IRQ_HANDLER
help
Support for Freescale MXC/iMX-based family of processors
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select HAVE_CLK_PREPARE
help
Support for Freescale MXS-based family of processors
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IOP13XX (XScale) family of processors.
select CPU_XSC3
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IXP23xx (XScale) family of processors.
select CPU_XSCALE
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
select ARM_AMBA
select USB_ARCH_HAS_OHCI
select CLKDEV_LOOKUP
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for the NXP LPC32XX family of processors
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
+ select GPIO_PXA
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
+ select GENERIC_ALLOCATOR
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
select CPU_ARM922T
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
-config ARCH_NUC93X
- bool "Nuvoton NUC93X CPU"
- select CPU_ARM926T
- select CLKDEV_LOOKUP
- help
- Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
- low-power and high performance MPEG-4/JPEG multimedia controller chip.
-
config ARCH_TEGRA
bool "NVIDIA Tegra"
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
select HAVE_SCHED_CLOCK
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_CPUFREQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
+config ARCH_PICOXCELL
+ bool "Picochip picoXcell"
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select ARM_VIC
+ select CPU_V6K
+ select DW_APB_TIMER
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_SCHED_CLOCK
+ select HAVE_TCM
+ select NO_IOPORT
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ This enables support for systems based on the Picochip picoXcell
+ family of Femtocell devices. The picoxcell support requires device tree
+ for all boards.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
select CLKSRC_MMIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select GPIO_PXA
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
select HAVE_CLK
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
+ select HAVE_SMP
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
select PM_GENERIC_DOMAINS if PM
+ select NEED_MACH_MEMORY_H
help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
select HAVE_IDE
+ select NEED_MACH_MEMORY_H
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
select ARCH_HAS_CPUFREQ
select CPU_FREQ
select GENERIC_CLOCKEVENTS
- select HAVE_CLK
+ select CLKDEV_LOOKUP
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
+ select NEED_MACH_MEMORY_H
help
Support for StrongARM 11x0 based boards.
select CPU_V6
select ARM_VIC
select HAVE_CLK
+ select HAVE_TCM
select CLKDEV_LOOKUP
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
select ARCH_REQUIRE_GPIOLIB
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
- select SAMSUNG_IRQ_UART
select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_MEMORY_H
help
Samsung S5PV210/S5PC110 series based systems
-config ARCH_EXYNOS4
- bool "Samsung EXYNOS4"
+config ARCH_EXYNOS
+ bool "SAMSUNG EXYNOS"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
select ARCH_HAS_HOLES_MEMORYMODEL
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_MEMORY_H
help
- Samsung EXYNOS4 series based systems
+ Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
config ARCH_SHARK
bool "Shark"
select ZONE_DMA
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
-config ARCH_TCC_926
- bool "Telechips TCC ARM926-based systems"
- select CLKSRC_MMIO
- select CPU_ARM926T
- select HAVE_CLK
- select CLKDEV_LOOKUP
- select GENERIC_CLOCKEVENTS
- help
- Support for Telechips TCC ARM926-based systems.
-
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
select HAVE_SCHED_CLOCK
select HAVE_TCM
select ARM_AMBA
+ select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
help
Support for ST-Ericsson U300 series mobile platforms.
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Support for ST-Ericsson's Ux500 architecture
select CPU_ARM926T
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_REQUIRE_GPIOLIB
help
Support for the Nomadik platform by ST-Ericsson
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform"
select CPU_V7
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select ARM_GIC
select ARM_AMBA
select ICST
+ select MIGHT_HAVE_CACHE_L2X0
select USE_OF
help
Support for Xilinx Zynq ARM Cortex A9 Platform
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/plat-nomadik/Kconfig"
-source "arch/arm/mach-nuc93x/Kconfig"
-
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
source "arch/arm/plat-spear/Kconfig"
-source "arch/arm/plat-tcc/Kconfig"
-
if ARCH_S3C2410
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
-source "arch/arm/mach-exynos4/Kconfig"
+source "arch/arm/mach-exynos/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
source arch/arm/mm/Kconfig
+config ARM_NR_BANKS
+ int
+ default 16 if ARCH_EP93XX
+ default 8
+
config IWMMXT
bool "Enable iWMMXt support"
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
-# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
config XSCALE_PMU
bool
- depends on CPU_XSCALE && !XSCALE_PMU_TIMER
+ depends on CPU_XSCALE
default y
config CPU_HAS_PMU
capabilities of the processor.
config PL310_ERRATA_588369
- bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+ bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0
help
The PL310 L2 cache controller implements three types of Clean &
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
- depends on CPU_V7 && SMP
+ depends on CPU_V7
help
This option enables the workaround for the 720789 Cortex-A9 (prior to
r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
entries regardless of the ASID.
config PL310_ERRATA_727915
- bool "Background Clean & Invalidate by Way operation can cause data corruption"
+ bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
depends on CACHE_L2X0
help
PL310 implements the Clean & Invalidate by Way L2 cache maintenance
config ARM_ERRATA_751472
bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
- depends on CPU_V7 && SMP
+ depends on CPU_V7
help
This option enables the workaround for the 751472 Cortex-A9 (prior
to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
operation is received by a CPU before the ICIALLUIS has completed,
potentially leading to corrupted entries in the cache or TLB.
-config ARM_ERRATA_753970
- bool "ARM errata: cache sync operation may be faulty"
+config PL310_ERRATA_753970
+ bool "PL310 errata: cache sync operation may be faulty"
depends on CACHE_PL310
help
This option enables the workaround for the 753970 PL310 (r3p0) erratum.
relevant cache maintenance functions and sets a specific bit
in the diagnostic control register of the SCU.
+config PL310_ERRATA_769419
+ bool "PL310 errata: no automatic Store Buffer drain"
+ depends on CACHE_L2X0
+ help
+ On revisions of the PL310 prior to r3p2, the Store Buffer does
+ not automatically drain. This can cause normal, non-cacheable
+ writes to be retained when the memory system is idle, leading
+ to suboptimal I/O performance for drivers using coherent DMA.
+ This option adds a write barrier to the cpu_idle loop so that,
+ on systems with an outer cache, the store buffer is drained
+ explicitly.
+
endmenu
source "arch/arm/common/Kconfig"
source "kernel/time/Kconfig"
+config HAVE_SMP
+ bool
+ help
+ This option should be selected by machines which have an SMP-
+ capable CPU.
+
+ The only effect of this option is to make the SMP-related
+ options available to the user for configuration.
+
config SMP
bool "Symmetric Multi-Processing"
depends on CPU_V6K || CPU_V7
depends on GENERIC_CLOCKEVENTS
- depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
- ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
- ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
+ depends on HAVE_SMP
depends on MMU
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
processor machines. On a single processor machine, the kernel will
run faster if you say N here.
- See also <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://tldp.org/HOWTO/SMP-HOWTO.html>.
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
+config ARCH_NR_GPIO
+ int
+ default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
+ default 350 if ARCH_U8500
+ default 0
+ help
+ Maximum number of GPIOs in the system.
+
+ If unsure, leave the default value.
+
source kernel/Kconfig.preempt
config HZ
endchoice
+config ARM_APPENDED_DTB
+ bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
+ depends on OF && !ZBOOT_ROM && EXPERIMENTAL
+ help
+ With this option, the boot code will look for a device tree binary
+ (DTB) appended to zImage
+ (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
+
+ This is meant as a backward compatibility convenience for those
+ systems with a bootloader that can't be upgraded to accommodate
+ the documented boot protocol using a device tree.
+
+ Beware that there is very little in terms of protection against
+ this option being confused by leftover garbage in memory that might
+ look like a DTB header after a reboot if no actual DTB is appended
+ to zImage. Do not leave this option active in a production kernel
+ if you don't intend to always append a DTB. Proper passing of the
+ location into r2 of a bootloader provided DTB is always preferable
+ to this option.
+
+config ARM_ATAG_DTB_COMPAT
+ bool "Supplement the appended DTB with traditional ATAG information"
+ depends on ARM_APPENDED_DTB
+ help
+ Some old bootloaders can't be updated to a DTB capable one, yet
+ they provide ATAGs with memory configuration, the ramdisk address,
+ the kernel cmdline string, etc. Such information is dynamically
+ provided by the bootloader and can't always be stored in a static
+ DTB. To allow a device tree enabled kernel to be used with such
+ bootloaders, this option allows zImage to extract the information
+ from the ATAG list and store it at run time into the appended DTB.
+
config CMDLINE
string "Default kernel command string"
default ""
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
- depends on !ZBOOT_ROM
+ depends on !ZBOOT_ROM && !ARM_LPAE
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
bool
depends on CPU_FREQ && ARCH_PXA && PXA25x
default y
+ select CPU_FREQ_TABLE
select CPU_FREQ_DEFAULT_GOV_USERSPACE
config CPU_FREQ_S3C
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
- depends on !ARCH_S5P64X0 && !ARCH_S5PC100
+ depends on !ARCH_S5PC100
depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
def_bool y