1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then referrs to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos_params.h>
166 #include <net/lib80211.h>
170 #define IPW2100_VERSION "git-1.2.2"
172 #define DRV_NAME "ipw2100"
173 #define DRV_VERSION IPW2100_VERSION
174 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
175 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
177 struct pm_qos_request_list ipw2100_pm_qos_req;
179 /* Debugging stuff */
180 #ifdef CONFIG_IPW2100_DEBUG
181 #define IPW2100_RX_DEBUG /* Reception debugging */
184 MODULE_DESCRIPTION(DRV_DESCRIPTION);
185 MODULE_VERSION(DRV_VERSION);
186 MODULE_AUTHOR(DRV_COPYRIGHT);
187 MODULE_LICENSE("GPL");
189 static int debug = 0;
190 static int network_mode = 0;
191 static int channel = 0;
192 static int associate = 0;
193 static int disable = 0;
195 static struct ipw2100_fw ipw2100_firmware;
198 #include <linux/moduleparam.h>
199 module_param(debug, int, 0444);
200 module_param_named(mode, network_mode, int, 0444);
201 module_param(channel, int, 0444);
202 module_param(associate, int, 0444);
203 module_param(disable, int, 0444);
205 MODULE_PARM_DESC(debug, "debug level");
206 MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
207 MODULE_PARM_DESC(channel, "channel");
208 MODULE_PARM_DESC(associate, "auto associate when scanning (default off)");
209 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
211 static u32 ipw2100_debug_level = IPW_DL_NONE;
213 #ifdef CONFIG_IPW2100_DEBUG
214 #define IPW_DEBUG(level, message...) \
216 if (ipw2100_debug_level & (level)) { \
217 printk(KERN_DEBUG "ipw2100: %c %s ", \
218 in_interrupt() ? 'I' : 'U', __func__); \
223 #define IPW_DEBUG(level, message...) do {} while (0)
224 #endif /* CONFIG_IPW2100_DEBUG */
226 #ifdef CONFIG_IPW2100_DEBUG
227 static const char *command_types[] = {
229 "unused", /* HOST_ATTENTION */
231 "unused", /* SLEEP */
232 "unused", /* HOST_POWER_DOWN */
235 "unused", /* SET_IMR */
238 "AUTHENTICATION_TYPE",
241 "INTERNATIONAL_MODE",
256 "CLEAR_ALL_MULTICAST",
277 "AP_OR_STATION_TABLE",
281 "unused", /* SAVE_CALIBRATION */
282 "unused", /* RESTORE_CALIBRATION */
286 "HOST_PRE_POWER_DOWN",
287 "unused", /* HOST_INTERRUPT_COALESCING */
289 "CARD_DISABLE_PHY_OFF",
290 "MSDU_TX_RATES" "undefined",
292 "SET_STATION_STAT_BITS",
293 "CLEAR_STATIONS_STAT_BITS",
295 "SET_SECURITY_INFORMATION",
296 "DISASSOCIATION_BSSID",
301 #define WEXT_USECHANNELS 1
303 static const long ipw2100_frequencies[] = {
304 2412, 2417, 2422, 2427,
305 2432, 2437, 2442, 2447,
306 2452, 2457, 2462, 2467,
310 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
312 static const long ipw2100_rates_11b[] = {
319 static struct ieee80211_rate ipw2100_bg_rates[] = {
321 { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
322 { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
323 { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
326 #define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
328 /* Pre-decl until we get the code solid and then we can clean it up */
329 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv);
330 static void ipw2100_tx_send_data(struct ipw2100_priv *priv);
331 static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
333 static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
334 static void ipw2100_queues_free(struct ipw2100_priv *priv);
335 static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
337 static int ipw2100_fw_download(struct ipw2100_priv *priv,
338 struct ipw2100_fw *fw);
339 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
340 struct ipw2100_fw *fw);
341 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
343 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
345 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
346 struct ipw2100_fw *fw);
347 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
348 struct ipw2100_fw *fw);
349 static void ipw2100_wx_event_work(struct work_struct *work);
350 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev);
351 static struct iw_handler_def ipw2100_wx_handler_def;
353 static inline void read_register(struct net_device *dev, u32 reg, u32 * val)
355 *val = readl((void __iomem *)(dev->base_addr + reg));
356 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
359 static inline void write_register(struct net_device *dev, u32 reg, u32 val)
361 writel(val, (void __iomem *)(dev->base_addr + reg));
362 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
365 static inline void read_register_word(struct net_device *dev, u32 reg,
368 *val = readw((void __iomem *)(dev->base_addr + reg));
369 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
372 static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val)
374 *val = readb((void __iomem *)(dev->base_addr + reg));
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
378 static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
380 writew(val, (void __iomem *)(dev->base_addr + reg));
381 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
384 static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
386 writeb(val, (void __iomem *)(dev->base_addr + reg));
387 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
390 static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val)
392 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
393 addr & IPW_REG_INDIRECT_ADDR_MASK);
394 read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
397 static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
399 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
400 addr & IPW_REG_INDIRECT_ADDR_MASK);
401 write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
404 static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val)
406 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
407 addr & IPW_REG_INDIRECT_ADDR_MASK);
408 read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
411 static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
413 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
414 addr & IPW_REG_INDIRECT_ADDR_MASK);
415 write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
418 static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val)
420 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
421 addr & IPW_REG_INDIRECT_ADDR_MASK);
422 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
425 static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
427 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
428 addr & IPW_REG_INDIRECT_ADDR_MASK);
429 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
432 static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
434 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
435 addr & IPW_REG_INDIRECT_ADDR_MASK);
438 static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
440 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
443 static void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
451 /* read first nibble byte by byte */
452 aligned_addr = addr & (~0x3);
453 dif_len = addr - aligned_addr;
455 /* Start reading at aligned_addr + dif_len */
456 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
458 for (i = dif_len; i < 4; i++, buf++)
459 write_register_byte(dev,
460 IPW_REG_INDIRECT_ACCESS_DATA + i,
467 /* read DWs through autoincrement registers */
468 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
469 aligned_len = len & (~0x3);
470 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
471 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *) buf);
473 /* copy the last nibble */
474 dif_len = len - aligned_len;
475 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
476 for (i = 0; i < dif_len; i++, buf++)
477 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
481 static void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
489 /* read first nibble byte by byte */
490 aligned_addr = addr & (~0x3);
491 dif_len = addr - aligned_addr;
493 /* Start reading at aligned_addr + dif_len */
494 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
496 for (i = dif_len; i < 4; i++, buf++)
497 read_register_byte(dev,
498 IPW_REG_INDIRECT_ACCESS_DATA + i,
505 /* read DWs through autoincrement registers */
506 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
507 aligned_len = len & (~0x3);
508 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
509 read_register(dev, IPW_REG_AUTOINCREMENT_DATA, (u32 *) buf);
511 /* copy the last nibble */
512 dif_len = len - aligned_len;
513 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
514 for (i = 0; i < dif_len; i++, buf++)
515 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
518 static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
520 return (dev->base_addr &&
522 ((void __iomem *)(dev->base_addr +
523 IPW_REG_DOA_DEBUG_AREA_START))
524 == IPW_DATA_DOA_DEBUG_VALUE));
527 static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
528 void *val, u32 * len)
530 struct ipw2100_ordinals *ordinals = &priv->ordinals;
537 if (ordinals->table1_addr == 0) {
538 printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
539 "before they have been loaded.\n");
543 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
544 if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
545 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
547 printk(KERN_WARNING DRV_NAME
548 ": ordinal buffer length too small, need %zd\n",
549 IPW_ORD_TAB_1_ENTRY_SIZE);
554 read_nic_dword(priv->net_dev,
555 ordinals->table1_addr + (ord << 2), &addr);
556 read_nic_dword(priv->net_dev, addr, val);
558 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
563 if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
565 ord -= IPW_START_ORD_TAB_2;
567 /* get the address of statistic */
568 read_nic_dword(priv->net_dev,
569 ordinals->table2_addr + (ord << 3), &addr);
571 /* get the second DW of statistics ;
572 * two 16-bit words - first is length, second is count */
573 read_nic_dword(priv->net_dev,
574 ordinals->table2_addr + (ord << 3) + sizeof(u32),
577 /* get each entry length */
578 field_len = *((u16 *) & field_info);
580 /* get number of entries */
581 field_count = *(((u16 *) & field_info) + 1);
583 /* abort if no enough memory */
584 total_length = field_len * field_count;
585 if (total_length > *len) {
594 /* read the ordinal data from the SRAM */
595 read_nic_memory(priv->net_dev, addr, total_length, val);
600 printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
601 "in table 2\n", ord);
606 static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val,
609 struct ipw2100_ordinals *ordinals = &priv->ordinals;
612 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
613 if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
614 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
615 IPW_DEBUG_INFO("wrong size\n");
619 read_nic_dword(priv->net_dev,
620 ordinals->table1_addr + (ord << 2), &addr);
622 write_nic_dword(priv->net_dev, addr, *val);
624 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
629 IPW_DEBUG_INFO("wrong table\n");
630 if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
636 static char *snprint_line(char *buf, size_t count,
637 const u8 * data, u32 len, u32 ofs)
642 out = snprintf(buf, count, "%08X", ofs);
644 for (l = 0, i = 0; i < 2; i++) {
645 out += snprintf(buf + out, count - out, " ");
646 for (j = 0; j < 8 && l < len; j++, l++)
647 out += snprintf(buf + out, count - out, "%02X ",
650 out += snprintf(buf + out, count - out, " ");
653 out += snprintf(buf + out, count - out, " ");
654 for (l = 0, i = 0; i < 2; i++) {
655 out += snprintf(buf + out, count - out, " ");
656 for (j = 0; j < 8 && l < len; j++, l++) {
657 c = data[(i * 8 + j)];
658 if (!isascii(c) || !isprint(c))
661 out += snprintf(buf + out, count - out, "%c", c);
665 out += snprintf(buf + out, count - out, " ");
671 static void printk_buf(int level, const u8 * data, u32 len)
675 if (!(ipw2100_debug_level & level))
679 printk(KERN_DEBUG "%s\n",
680 snprint_line(line, sizeof(line), &data[ofs],
681 min(len, 16U), ofs));
683 len -= min(len, 16U);
687 #define MAX_RESET_BACKOFF 10
689 static void schedule_reset(struct ipw2100_priv *priv)
691 unsigned long now = get_seconds();
693 /* If we haven't received a reset request within the backoff period,
694 * then we can reset the backoff interval so this reset occurs
696 if (priv->reset_backoff &&
697 (now - priv->last_reset > priv->reset_backoff))
698 priv->reset_backoff = 0;
700 priv->last_reset = get_seconds();
702 if (!(priv->status & STATUS_RESET_PENDING)) {
703 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
704 priv->net_dev->name, priv->reset_backoff);
705 netif_carrier_off(priv->net_dev);
706 netif_stop_queue(priv->net_dev);
707 priv->status |= STATUS_RESET_PENDING;
708 if (priv->reset_backoff)
709 queue_delayed_work(priv->workqueue, &priv->reset_work,
710 priv->reset_backoff * HZ);
712 queue_delayed_work(priv->workqueue, &priv->reset_work,
715 if (priv->reset_backoff < MAX_RESET_BACKOFF)
716 priv->reset_backoff++;
718 wake_up_interruptible(&priv->wait_command_queue);
720 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
721 priv->net_dev->name);
725 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
726 static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
727 struct host_command *cmd)
729 struct list_head *element;
730 struct ipw2100_tx_packet *packet;
734 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
735 command_types[cmd->host_command], cmd->host_command,
736 cmd->host_command_length);
737 printk_buf(IPW_DL_HC, (u8 *) cmd->host_command_parameters,
738 cmd->host_command_length);
740 spin_lock_irqsave(&priv->low_lock, flags);
742 if (priv->fatal_error) {
744 ("Attempt to send command while hardware in fatal error condition.\n");
749 if (!(priv->status & STATUS_RUNNING)) {
751 ("Attempt to send command while hardware is not running.\n");
756 if (priv->status & STATUS_CMD_ACTIVE) {
758 ("Attempt to send command while another command is pending.\n");
763 if (list_empty(&priv->msg_free_list)) {
764 IPW_DEBUG_INFO("no available msg buffers\n");
768 priv->status |= STATUS_CMD_ACTIVE;
769 priv->messages_sent++;
771 element = priv->msg_free_list.next;
773 packet = list_entry(element, struct ipw2100_tx_packet, list);
774 packet->jiffy_start = jiffies;
776 /* initialize the firmware command packet */
777 packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
778 packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
779 packet->info.c_struct.cmd->host_command_len_reg =
780 cmd->host_command_length;
781 packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
783 memcpy(packet->info.c_struct.cmd->host_command_params_reg,
784 cmd->host_command_parameters,
785 sizeof(packet->info.c_struct.cmd->host_command_params_reg));
788 DEC_STAT(&priv->msg_free_stat);
790 list_add_tail(element, &priv->msg_pend_list);
791 INC_STAT(&priv->msg_pend_stat);
793 ipw2100_tx_send_commands(priv);
794 ipw2100_tx_send_data(priv);
796 spin_unlock_irqrestore(&priv->low_lock, flags);
799 * We must wait for this command to complete before another
800 * command can be sent... but if we wait more than 3 seconds
801 * then there is a problem.
805 wait_event_interruptible_timeout(priv->wait_command_queue,
807 status & STATUS_CMD_ACTIVE),
808 HOST_COMPLETE_TIMEOUT);
811 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
812 1000 * (HOST_COMPLETE_TIMEOUT / HZ));
813 priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
814 priv->status &= ~STATUS_CMD_ACTIVE;
815 schedule_reset(priv);
819 if (priv->fatal_error) {
820 printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
821 priv->net_dev->name);
825 /* !!!!! HACK TEST !!!!!
826 * When lots of debug trace statements are enabled, the driver
827 * doesn't seem to have as many firmware restart cycles...
829 * As a test, we're sticking in a 1/100s delay here */
830 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
835 spin_unlock_irqrestore(&priv->low_lock, flags);
841 * Verify the values and data access of the hardware
842 * No locks needed or used. No functions called.
844 static int ipw2100_verify(struct ipw2100_priv *priv)
849 u32 val1 = 0x76543210;
850 u32 val2 = 0xFEDCBA98;
852 /* Domain 0 check - all values should be DOA_DEBUG */
853 for (address = IPW_REG_DOA_DEBUG_AREA_START;
854 address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) {
855 read_register(priv->net_dev, address, &data1);
856 if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
860 /* Domain 1 check - use arbitrary read/write compare */
861 for (address = 0; address < 5; address++) {
862 /* The memory area is not used now */
863 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
865 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
867 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
869 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
871 if (val1 == data1 && val2 == data2)
880 * Loop until the CARD_DISABLED bit is the same value as the
883 * TODO: See if it would be more efficient to do a wait/wake
884 * cycle and have the completion event trigger the wakeup
887 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
888 static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
892 u32 len = sizeof(card_state);
895 for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
896 err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
899 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
904 /* We'll break out if either the HW state says it is
905 * in the state we want, or if HOST_COMPLETE command
907 if ((card_state == state) ||
908 ((priv->status & STATUS_ENABLED) ?
909 IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
910 if (state == IPW_HW_STATE_ENABLED)
911 priv->status |= STATUS_ENABLED;
913 priv->status &= ~STATUS_ENABLED;
921 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
922 state ? "DISABLED" : "ENABLED");
926 /*********************************************************************
927 Procedure : sw_reset_and_clock
928 Purpose : Asserts s/w reset, asserts clock initialization
929 and waits for clock stabilization
930 ********************************************************************/
931 static int sw_reset_and_clock(struct ipw2100_priv *priv)
937 write_register(priv->net_dev, IPW_REG_RESET_REG,
938 IPW_AUX_HOST_RESET_REG_SW_RESET);
940 // wait for clock stabilization
941 for (i = 0; i < 1000; i++) {
942 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
944 // check clock ready bit
945 read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
946 if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
951 return -EIO; // TODO: better error value
953 /* set "initialization complete" bit to move adapter to
955 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
956 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
958 /* wait for clock stabilization */
959 for (i = 0; i < 10000; i++) {
960 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
962 /* check clock ready bit */
963 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
964 if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
969 return -EIO; /* TODO: better error value */
971 /* set D0 standby bit */
972 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
973 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
974 r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
979 /*********************************************************************
980 Procedure : ipw2100_download_firmware
981 Purpose : Initiaze adapter after power on.
983 1. assert s/w reset first!
984 2. awake clocks & wait for clock stabilization
985 3. hold ARC (don't ask me why...)
986 4. load Dino ucode and reset/clock init again
987 5. zero-out shared mem
989 *******************************************************************/
990 static int ipw2100_download_firmware(struct ipw2100_priv *priv)
996 /* Fetch the firmware and microcode */
997 struct ipw2100_fw ipw2100_firmware;
1000 if (priv->fatal_error) {
1001 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1002 "fatal error %d. Interface must be brought down.\n",
1003 priv->net_dev->name, priv->fatal_error);
1007 if (!ipw2100_firmware.version) {
1008 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
1010 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1011 priv->net_dev->name, err);
1012 priv->fatal_error = IPW2100_ERR_FW_LOAD;
1017 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
1019 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1020 priv->net_dev->name, err);
1021 priv->fatal_error = IPW2100_ERR_FW_LOAD;
1025 priv->firmware_version = ipw2100_firmware.version;
1027 /* s/w reset and clock stabilization */
1028 err = sw_reset_and_clock(priv);
1030 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1031 priv->net_dev->name, err);
1035 err = ipw2100_verify(priv);
1037 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1038 priv->net_dev->name, err);
1043 write_nic_dword(priv->net_dev,
1044 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x80000000);
1046 /* allow ARC to run */
1047 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1049 /* load microcode */
1050 err = ipw2100_ucode_download(priv, &ipw2100_firmware);
1052 printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
1053 priv->net_dev->name, err);
1058 write_nic_dword(priv->net_dev,
1059 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x00000000);
1061 /* s/w reset and clock stabilization (again!!!) */
1062 err = sw_reset_and_clock(priv);
1064 printk(KERN_ERR DRV_NAME
1065 ": %s: sw_reset_and_clock failed: %d\n",
1066 priv->net_dev->name, err);
1071 err = ipw2100_fw_download(priv, &ipw2100_firmware);
1073 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1074 priv->net_dev->name, err);
1079 * When the .resume method of the driver is called, the other
1080 * part of the system, i.e. the ide driver could still stay in
1081 * the suspend stage. This prevents us from loading the firmware
1082 * from the disk. --YZ
1085 /* free any storage allocated for firmware image */
1086 ipw2100_release_firmware(priv, &ipw2100_firmware);
1089 /* zero out Domain 1 area indirectly (Si requirement) */
1090 for (address = IPW_HOST_FW_SHARED_AREA0;
1091 address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
1092 write_nic_dword(priv->net_dev, address, 0);
1093 for (address = IPW_HOST_FW_SHARED_AREA1;
1094 address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
1095 write_nic_dword(priv->net_dev, address, 0);
1096 for (address = IPW_HOST_FW_SHARED_AREA2;
1097 address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
1098 write_nic_dword(priv->net_dev, address, 0);
1099 for (address = IPW_HOST_FW_SHARED_AREA3;
1100 address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
1101 write_nic_dword(priv->net_dev, address, 0);
1102 for (address = IPW_HOST_FW_INTERRUPT_AREA;
1103 address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
1104 write_nic_dword(priv->net_dev, address, 0);
1109 ipw2100_release_firmware(priv, &ipw2100_firmware);
1113 static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
1115 if (priv->status & STATUS_INT_ENABLED)
1117 priv->status |= STATUS_INT_ENABLED;
1118 write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
1121 static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
1123 if (!(priv->status & STATUS_INT_ENABLED))
1125 priv->status &= ~STATUS_INT_ENABLED;
1126 write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
1129 static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
1131 struct ipw2100_ordinals *ord = &priv->ordinals;
1133 IPW_DEBUG_INFO("enter\n");
1135 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
1138 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
1141 read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
1142 read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
1144 ord->table2_size &= 0x0000FFFF;
1146 IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
1147 IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
1148 IPW_DEBUG_INFO("exit\n");
1151 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
1155 * Set GPIO 3 writable by FW; GPIO 1 writable
1156 * by driver and enable clock
1158 reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
1159 IPW_BIT_GPIO_LED_OFF);
1160 write_register(priv->net_dev, IPW_REG_GPIO, reg);
1163 static int rf_kill_active(struct ipw2100_priv *priv)
1165 #define MAX_RF_KILL_CHECKS 5
1166 #define RF_KILL_CHECK_DELAY 40
1168 unsigned short value = 0;
1172 if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
1173 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false);
1174 priv->status &= ~STATUS_RF_KILL_HW;
1178 for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
1179 udelay(RF_KILL_CHECK_DELAY);
1180 read_register(priv->net_dev, IPW_REG_GPIO, ®);
1181 value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
1185 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
1186 priv->status |= STATUS_RF_KILL_HW;
1188 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false);
1189 priv->status &= ~STATUS_RF_KILL_HW;
1192 return (value == 0);
1195 static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
1201 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1204 if (ipw2100_get_ordinal
1205 (priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, &addr, &len)) {
1206 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1211 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
1214 * EEPROM version is the byte at offset 0xfd in firmware
1215 * We read 4 bytes, then shift out the byte we actually want */
1216 read_nic_dword(priv->net_dev, addr + 0xFC, &val);
1217 priv->eeprom_version = (val >> 24) & 0xFF;
1218 IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
1221 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1223 * notice that the EEPROM bit is reverse polarity, i.e.
1224 * bit = 0 signifies HW RF kill switch is supported
1225 * bit = 1 signifies HW RF kill switch is NOT supported
1227 read_nic_dword(priv->net_dev, addr + 0x20, &val);
1228 if (!((val >> 24) & 0x01))
1229 priv->hw_features |= HW_FEATURE_RFKILL;
1231 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1232 (priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not ");
1238 * Start firmware execution after power on and intialization
1241 * 2. Wait for f/w initialization completes;
1243 static int ipw2100_start_adapter(struct ipw2100_priv *priv)
1246 u32 inta, inta_mask, gpio;
1248 IPW_DEBUG_INFO("enter\n");
1250 if (priv->status & STATUS_RUNNING)
1254 * Initialize the hw - drive adapter to DO state by setting
1255 * init_done bit. Wait for clk_ready bit and Download
1258 if (ipw2100_download_firmware(priv)) {
1259 printk(KERN_ERR DRV_NAME
1260 ": %s: Failed to power on the adapter.\n",
1261 priv->net_dev->name);
1265 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1266 * in the firmware RBD and TBD ring queue */
1267 ipw2100_queues_initialize(priv);
1269 ipw2100_hw_set_gpio(priv);
1271 /* TODO -- Look at disabling interrupts here to make sure none
1272 * get fired during FW initialization */
1274 /* Release ARC - clear reset bit */
1275 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1277 /* wait for f/w intialization complete */
1278 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1281 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1282 /* Todo... wait for sync command ... */
1284 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1286 /* check "init done" bit */
1287 if (inta & IPW2100_INTA_FW_INIT_DONE) {
1288 /* reset "init done" bit */
1289 write_register(priv->net_dev, IPW_REG_INTA,
1290 IPW2100_INTA_FW_INIT_DONE);
1294 /* check error conditions : we check these after the firmware
1295 * check so that if there is an error, the interrupt handler
1296 * will see it and the adapter will be reset */
1298 (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
1299 /* clear error conditions */
1300 write_register(priv->net_dev, IPW_REG_INTA,
1301 IPW2100_INTA_FATAL_ERROR |
1302 IPW2100_INTA_PARITY_ERROR);
1306 /* Clear out any pending INTAs since we aren't supposed to have
1307 * interrupts enabled at this point... */
1308 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1309 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
1310 inta &= IPW_INTERRUPT_MASK;
1311 /* Clear out any pending interrupts */
1312 if (inta & inta_mask)
1313 write_register(priv->net_dev, IPW_REG_INTA, inta);
1315 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1316 i ? "SUCCESS" : "FAILED");
1319 printk(KERN_WARNING DRV_NAME
1320 ": %s: Firmware did not initialize.\n",
1321 priv->net_dev->name);
1325 /* allow firmware to write to GPIO1 & GPIO3 */
1326 read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
1328 gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
1330 write_register(priv->net_dev, IPW_REG_GPIO, gpio);
1332 /* Ready to receive commands */
1333 priv->status |= STATUS_RUNNING;
1335 /* The adapter has been reset; we are not associated */
1336 priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
1338 IPW_DEBUG_INFO("exit\n");
1343 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
1345 if (!priv->fatal_error)
1348 priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
1349 priv->fatal_index %= IPW2100_ERROR_QUEUE;
1350 priv->fatal_error = 0;
1353 /* NOTE: Our interrupt is disabled when this method is called */
1354 static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
1359 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1361 ipw2100_hw_set_gpio(priv);
1363 /* Step 1. Stop Master Assert */
1364 write_register(priv->net_dev, IPW_REG_RESET_REG,
1365 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1367 /* Step 2. Wait for stop Master Assert
1368 * (not more than 50us, otherwise ret error */
1371 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
1372 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
1374 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1378 priv->status &= ~STATUS_RESET_PENDING;
1382 ("exit - waited too long for master assert stop\n");
1386 write_register(priv->net_dev, IPW_REG_RESET_REG,
1387 IPW_AUX_HOST_RESET_REG_SW_RESET);
1389 /* Reset any fatal_error conditions */
1390 ipw2100_reset_fatalerror(priv);
1392 /* At this point, the adapter is now stopped and disabled */
1393 priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
1394 STATUS_ASSOCIATED | STATUS_ENABLED);
1400 * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
1402 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1404 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1405 * if STATUS_ASSN_LOST is sent.
1407 static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
1410 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1412 struct host_command cmd = {
1413 .host_command = CARD_DISABLE_PHY_OFF,
1414 .host_command_sequence = 0,
1415 .host_command_length = 0,
1420 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1422 /* Turn off the radio */
1423 err = ipw2100_hw_send_command(priv, &cmd);
1427 for (i = 0; i < 2500; i++) {
1428 read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
1429 read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
1431 if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
1432 (val2 & IPW2100_COMMAND_PHY_OFF))
1435 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY);
1441 static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
1443 struct host_command cmd = {
1444 .host_command = HOST_COMPLETE,
1445 .host_command_sequence = 0,
1446 .host_command_length = 0
1450 IPW_DEBUG_HC("HOST_COMPLETE\n");
1452 if (priv->status & STATUS_ENABLED)
1455 mutex_lock(&priv->adapter_mutex);
1457 if (rf_kill_active(priv)) {
1458 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1462 err = ipw2100_hw_send_command(priv, &cmd);
1464 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1468 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
1470 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1471 priv->net_dev->name);
1475 if (priv->stop_hang_check) {
1476 priv->stop_hang_check = 0;
1477 queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
1481 mutex_unlock(&priv->adapter_mutex);
1485 static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
1487 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1489 struct host_command cmd = {
1490 .host_command = HOST_PRE_POWER_DOWN,
1491 .host_command_sequence = 0,
1492 .host_command_length = 0,
1497 if (!(priv->status & STATUS_RUNNING))
1500 priv->status |= STATUS_STOPPING;
1502 /* We can only shut down the card if the firmware is operational. So,
1503 * if we haven't reset since a fatal_error, then we can not send the
1504 * shutdown commands. */
1505 if (!priv->fatal_error) {
1506 /* First, make sure the adapter is enabled so that the PHY_OFF
1507 * command can shut it down */
1508 ipw2100_enable_adapter(priv);
1510 err = ipw2100_hw_phy_off(priv);
1512 printk(KERN_WARNING DRV_NAME
1513 ": Error disabling radio %d\n", err);
1516 * If in D0-standby mode going directly to D3 may cause a
1517 * PCI bus violation. Therefore we must change out of the D0
1520 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1521 * hardware from going into standby mode and will transition
1522 * out of D0-standby if it is already in that state.
1524 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1525 * driver upon completion. Once received, the driver can
1526 * proceed to the D3 state.
1528 * Prepare for power down command to fw. This command would
1529 * take HW out of D0-standby and prepare it for D3 state.
1531 * Currently FW does not support event notification for this
1532 * event. Therefore, skip waiting for it. Just wait a fixed
1535 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1537 err = ipw2100_hw_send_command(priv, &cmd);
1539 printk(KERN_WARNING DRV_NAME ": "
1540 "%s: Power down command failed: Error %d\n",
1541 priv->net_dev->name, err);
1543 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY);
1546 priv->status &= ~STATUS_ENABLED;
1549 * Set GPIO 3 writable by FW; GPIO 1 writable
1550 * by driver and enable clock
1552 ipw2100_hw_set_gpio(priv);
1555 * Power down adapter. Sequence:
1556 * 1. Stop master assert (RESET_REG[9]=1)
1557 * 2. Wait for stop master (RESET_REG[8]==1)
1558 * 3. S/w reset assert (RESET_REG[7] = 1)
1561 /* Stop master assert */
1562 write_register(priv->net_dev, IPW_REG_RESET_REG,
1563 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1565 /* wait stop master not more than 50 usec.
1566 * Otherwise return error. */
1567 for (i = 5; i > 0; i--) {
1570 /* Check master stop bit */
1571 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
1573 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1578 printk(KERN_WARNING DRV_NAME
1579 ": %s: Could now power down adapter.\n",
1580 priv->net_dev->name);
1582 /* assert s/w reset */
1583 write_register(priv->net_dev, IPW_REG_RESET_REG,
1584 IPW_AUX_HOST_RESET_REG_SW_RESET);
1586 priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
1591 static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
1593 struct host_command cmd = {
1594 .host_command = CARD_DISABLE,
1595 .host_command_sequence = 0,
1596 .host_command_length = 0
1600 IPW_DEBUG_HC("CARD_DISABLE\n");
1602 if (!(priv->status & STATUS_ENABLED))
1605 /* Make sure we clear the associated state */
1606 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1608 if (!priv->stop_hang_check) {
1609 priv->stop_hang_check = 1;
1610 cancel_delayed_work(&priv->hang_check);
1613 mutex_lock(&priv->adapter_mutex);
1615 err = ipw2100_hw_send_command(priv, &cmd);
1617 printk(KERN_WARNING DRV_NAME
1618 ": exit - failed to send CARD_DISABLE command\n");
1622 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
1624 printk(KERN_WARNING DRV_NAME
1625 ": exit - card failed to change to DISABLED\n");
1629 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1632 mutex_unlock(&priv->adapter_mutex);
1636 static int ipw2100_set_scan_options(struct ipw2100_priv *priv)
1638 struct host_command cmd = {
1639 .host_command = SET_SCAN_OPTIONS,
1640 .host_command_sequence = 0,
1641 .host_command_length = 8
1645 IPW_DEBUG_INFO("enter\n");
1647 IPW_DEBUG_SCAN("setting scan options\n");
1649 cmd.host_command_parameters[0] = 0;
1651 if (!(priv->config & CFG_ASSOCIATE))
1652 cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
1653 if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled)
1654 cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
1655 if (priv->config & CFG_PASSIVE_SCAN)
1656 cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
1658 cmd.host_command_parameters[1] = priv->channel_mask;
1660 err = ipw2100_hw_send_command(priv, &cmd);
1662 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1663 cmd.host_command_parameters[0]);
1668 static int ipw2100_start_scan(struct ipw2100_priv *priv)
1670 struct host_command cmd = {
1671 .host_command = BROADCAST_SCAN,
1672 .host_command_sequence = 0,
1673 .host_command_length = 4
1677 IPW_DEBUG_HC("START_SCAN\n");
1679 cmd.host_command_parameters[0] = 0;
1681 /* No scanning if in monitor mode */
1682 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
1685 if (priv->status & STATUS_SCANNING) {
1686 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1690 IPW_DEBUG_INFO("enter\n");
1692 /* Not clearing here; doing so makes iwlist always return nothing...
1694 * We should modify the table logic to use aging tables vs. clearing
1695 * the table on each scan start.
1697 IPW_DEBUG_SCAN("starting scan\n");
1699 priv->status |= STATUS_SCANNING;
1700 err = ipw2100_hw_send_command(priv, &cmd);
1702 priv->status &= ~STATUS_SCANNING;
1704 IPW_DEBUG_INFO("exit\n");
1709 static const struct libipw_geo ipw_geos[] = {
1713 .bg = {{2412, 1}, {2417, 2}, {2422, 3},
1714 {2427, 4}, {2432, 5}, {2437, 6},
1715 {2442, 7}, {2447, 8}, {2452, 9},
1716 {2457, 10}, {2462, 11}, {2467, 12},
1717 {2472, 13}, {2484, 14}},
1721 static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
1723 unsigned long flags;
1726 u32 ord_len = sizeof(lock);
1728 /* Age scan list entries found before suspend */
1729 if (priv->suspend_time) {
1730 libipw_networks_age(priv->ieee, priv->suspend_time);
1731 priv->suspend_time = 0;
1734 /* Quiet if manually disabled. */
1735 if (priv->status & STATUS_RF_KILL_SW) {
1736 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1737 "switch\n", priv->net_dev->name);
1741 /* the ipw2100 hardware really doesn't want power management delays
1742 * longer than 175usec
1744 pm_qos_update_request(&ipw2100_pm_qos_req, 175);
1746 /* If the interrupt is enabled, turn it off... */
1747 spin_lock_irqsave(&priv->low_lock, flags);
1748 ipw2100_disable_interrupts(priv);
1750 /* Reset any fatal_error conditions */
1751 ipw2100_reset_fatalerror(priv);
1752 spin_unlock_irqrestore(&priv->low_lock, flags);
1754 if (priv->status & STATUS_POWERED ||
1755 (priv->status & STATUS_RESET_PENDING)) {
1756 /* Power cycle the card ... */
1757 if (ipw2100_power_cycle_adapter(priv)) {
1758 printk(KERN_WARNING DRV_NAME
1759 ": %s: Could not cycle adapter.\n",
1760 priv->net_dev->name);
1765 priv->status |= STATUS_POWERED;
1767 /* Load the firmware, start the clocks, etc. */
1768 if (ipw2100_start_adapter(priv)) {
1769 printk(KERN_ERR DRV_NAME
1770 ": %s: Failed to start the firmware.\n",
1771 priv->net_dev->name);
1776 ipw2100_initialize_ordinals(priv);
1778 /* Determine capabilities of this particular HW configuration */
1779 if (ipw2100_get_hw_features(priv)) {
1780 printk(KERN_ERR DRV_NAME
1781 ": %s: Failed to determine HW features.\n",
1782 priv->net_dev->name);
1787 /* Initialize the geo */
1788 if (libipw_set_geo(priv->ieee, &ipw_geos[0])) {
1789 printk(KERN_WARNING DRV_NAME "Could not set geo\n");
1792 priv->ieee->freq_band = LIBIPW_24GHZ_BAND;
1795 if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
1796 printk(KERN_ERR DRV_NAME
1797 ": %s: Failed to clear ordinal lock.\n",
1798 priv->net_dev->name);
1803 priv->status &= ~STATUS_SCANNING;
1805 if (rf_kill_active(priv)) {
1806 printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
1807 priv->net_dev->name);
1809 if (priv->stop_rf_kill) {
1810 priv->stop_rf_kill = 0;
1811 queue_delayed_work(priv->workqueue, &priv->rf_kill,
1812 round_jiffies_relative(HZ));
1818 /* Turn on the interrupt so that commands can be processed */
1819 ipw2100_enable_interrupts(priv);
1821 /* Send all of the commands that must be sent prior to
1823 if (ipw2100_adapter_setup(priv)) {
1824 printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
1825 priv->net_dev->name);
1831 /* Enable the adapter - sends HOST_COMPLETE */
1832 if (ipw2100_enable_adapter(priv)) {
1833 printk(KERN_ERR DRV_NAME ": "
1834 "%s: failed in call to enable adapter.\n",
1835 priv->net_dev->name);
1836 ipw2100_hw_stop_adapter(priv);
1841 /* Start a scan . . . */
1842 ipw2100_set_scan_options(priv);
1843 ipw2100_start_scan(priv);
1850 static void ipw2100_down(struct ipw2100_priv *priv)
1852 unsigned long flags;
1853 union iwreq_data wrqu = {
1855 .sa_family = ARPHRD_ETHER}
1857 int associated = priv->status & STATUS_ASSOCIATED;
1859 /* Kill the RF switch timer */
1860 if (!priv->stop_rf_kill) {
1861 priv->stop_rf_kill = 1;
1862 cancel_delayed_work(&priv->rf_kill);
1865 /* Kill the firmware hang check timer */
1866 if (!priv->stop_hang_check) {
1867 priv->stop_hang_check = 1;
1868 cancel_delayed_work(&priv->hang_check);
1871 /* Kill any pending resets */
1872 if (priv->status & STATUS_RESET_PENDING)
1873 cancel_delayed_work(&priv->reset_work);
1875 /* Make sure the interrupt is on so that FW commands will be
1876 * processed correctly */
1877 spin_lock_irqsave(&priv->low_lock, flags);
1878 ipw2100_enable_interrupts(priv);
1879 spin_unlock_irqrestore(&priv->low_lock, flags);
1881 if (ipw2100_hw_stop_adapter(priv))
1882 printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
1883 priv->net_dev->name);
1885 /* Do not disable the interrupt until _after_ we disable
1886 * the adaptor. Otherwise the CARD_DISABLE command will never
1887 * be ack'd by the firmware */
1888 spin_lock_irqsave(&priv->low_lock, flags);
1889 ipw2100_disable_interrupts(priv);
1890 spin_unlock_irqrestore(&priv->low_lock, flags);
1892 pm_qos_update_request(&ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE);
1894 /* We have to signal any supplicant if we are disassociating */
1896 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1898 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1899 netif_carrier_off(priv->net_dev);
1900 netif_stop_queue(priv->net_dev);
1903 /* Called by register_netdev() */
1904 static int ipw2100_net_init(struct net_device *dev)
1906 struct ipw2100_priv *priv = libipw_priv(dev);
1907 const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
1908 struct wireless_dev *wdev = &priv->ieee->wdev;
1912 ret = ipw2100_up(priv, 1);
1916 memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
1918 /* fill-out priv->ieee->bg_band */
1919 if (geo->bg_channels) {
1920 struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
1922 bg_band->band = IEEE80211_BAND_2GHZ;
1923 bg_band->n_channels = geo->bg_channels;
1925 kzalloc(geo->bg_channels *
1926 sizeof(struct ieee80211_channel), GFP_KERNEL);
1927 /* translate geo->bg to bg_band.channels */
1928 for (i = 0; i < geo->bg_channels; i++) {
1929 bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
1930 bg_band->channels[i].center_freq = geo->bg[i].freq;
1931 bg_band->channels[i].hw_value = geo->bg[i].channel;
1932 bg_band->channels[i].max_power = geo->bg[i].max_power;
1933 if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
1934 bg_band->channels[i].flags |=
1935 IEEE80211_CHAN_PASSIVE_SCAN;
1936 if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
1937 bg_band->channels[i].flags |=
1938 IEEE80211_CHAN_NO_IBSS;
1939 if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
1940 bg_band->channels[i].flags |=
1941 IEEE80211_CHAN_RADAR;
1942 /* No equivalent for LIBIPW_CH_80211H_RULES,
1943 LIBIPW_CH_UNIFORM_SPREADING, or
1944 LIBIPW_CH_B_ONLY... */
1946 /* point at bitrate info */
1947 bg_band->bitrates = ipw2100_bg_rates;
1948 bg_band->n_bitrates = RATE_COUNT;
1950 wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
1953 set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
1954 if (wiphy_register(wdev->wiphy)) {
1961 static void ipw2100_reset_adapter(struct work_struct *work)
1963 struct ipw2100_priv *priv =
1964 container_of(work, struct ipw2100_priv, reset_work.work);
1965 unsigned long flags;
1966 union iwreq_data wrqu = {
1968 .sa_family = ARPHRD_ETHER}
1970 int associated = priv->status & STATUS_ASSOCIATED;
1972 spin_lock_irqsave(&priv->low_lock, flags);
1973 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv->net_dev->name);
1975 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1976 priv->status |= STATUS_SECURITY_UPDATED;
1978 /* Force a power cycle even if interface hasn't been opened
1980 cancel_delayed_work(&priv->reset_work);
1981 priv->status |= STATUS_RESET_PENDING;
1982 spin_unlock_irqrestore(&priv->low_lock, flags);
1984 mutex_lock(&priv->action_mutex);
1985 /* stop timed checks so that they don't interfere with reset */
1986 priv->stop_hang_check = 1;
1987 cancel_delayed_work(&priv->hang_check);
1989 /* We have to signal any supplicant if we are disassociating */
1991 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1993 ipw2100_up(priv, 0);
1994 mutex_unlock(&priv->action_mutex);
1998 static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
2001 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2003 unsigned int len, essid_len;
2004 char essid[IW_ESSID_MAX_SIZE];
2009 DECLARE_SSID_BUF(ssid);
2012 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2013 * an actual MAC of the AP. Seems like FW sets this
2014 * address too late. Read it later and expose through
2015 * /proc or schedule a later task to query and update
2018 essid_len = IW_ESSID_MAX_SIZE;
2019 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
2022 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2028 ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &txrate, &len);
2030 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2036 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
2038 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2043 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
2045 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2049 memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
2052 case TX_RATE_1_MBIT:
2053 txratename = "1Mbps";
2055 case TX_RATE_2_MBIT:
2056 txratename = "2Mbsp";
2058 case TX_RATE_5_5_MBIT:
2059 txratename = "5.5Mbps";
2061 case TX_RATE_11_MBIT:
2062 txratename = "11Mbps";
2065 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
2066 txratename = "unknown rate";
2070 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2071 priv->net_dev->name, print_ssid(ssid, essid, essid_len),
2072 txratename, chan, bssid);
2074 /* now we copy read ssid into dev */
2075 if (!(priv->config & CFG_STATIC_ESSID)) {
2076 priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE);
2077 memcpy(priv->essid, essid, priv->essid_len);
2079 priv->channel = chan;
2080 memcpy(priv->bssid, bssid, ETH_ALEN);
2082 priv->status |= STATUS_ASSOCIATING;
2083 priv->connect_start = get_seconds();
2085 queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10);
2088 static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
2089 int length, int batch_mode)
2091 int ssid_len = min(length, IW_ESSID_MAX_SIZE);
2092 struct host_command cmd = {
2093 .host_command = SSID,
2094 .host_command_sequence = 0,
2095 .host_command_length = ssid_len
2098 DECLARE_SSID_BUF(ssid);
2100 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid, essid, ssid_len));
2103 memcpy(cmd.host_command_parameters, essid, ssid_len);
2106 err = ipw2100_disable_adapter(priv);
2111 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2112 * disable auto association -- so we cheat by setting a bogus SSID */
2113 if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
2115 u8 *bogus = (u8 *) cmd.host_command_parameters;
2116 for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
2117 bogus[i] = 0x18 + i;
2118 cmd.host_command_length = IW_ESSID_MAX_SIZE;
2121 /* NOTE: We always send the SSID command even if the provided ESSID is
2122 * the same as what we currently think is set. */
2124 err = ipw2100_hw_send_command(priv, &cmd);
2126 memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len);
2127 memcpy(priv->essid, essid, ssid_len);
2128 priv->essid_len = ssid_len;
2132 if (ipw2100_enable_adapter(priv))
2139 static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
2141 DECLARE_SSID_BUF(ssid);
2143 IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
2144 "disassociated: '%s' %pM\n",
2145 print_ssid(ssid, priv->essid, priv->essid_len),
2148 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
2150 if (priv->status & STATUS_STOPPING) {
2151 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2155 memset(priv->bssid, 0, ETH_ALEN);
2156 memset(priv->ieee->bssid, 0, ETH_ALEN);
2158 netif_carrier_off(priv->net_dev);
2159 netif_stop_queue(priv->net_dev);
2161 if (!(priv->status & STATUS_RUNNING))
2164 if (priv->status & STATUS_SECURITY_UPDATED)
2165 queue_delayed_work(priv->workqueue, &priv->security_work, 0);
2167 queue_delayed_work(priv->workqueue, &priv->wx_event_work, 0);
2170 static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
2172 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2173 priv->net_dev->name);
2175 /* RF_KILL is now enabled (else we wouldn't be here) */
2176 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
2177 priv->status |= STATUS_RF_KILL_HW;
2179 /* Make sure the RF Kill check timer is running */
2180 priv->stop_rf_kill = 0;
2181 cancel_delayed_work(&priv->rf_kill);
2182 queue_delayed_work(priv->workqueue, &priv->rf_kill,
2183 round_jiffies_relative(HZ));
2186 static void send_scan_event(void *data)
2188 struct ipw2100_priv *priv = data;
2189 union iwreq_data wrqu;
2191 wrqu.data.length = 0;
2192 wrqu.data.flags = 0;
2193 wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL);
2196 static void ipw2100_scan_event_later(struct work_struct *work)
2198 send_scan_event(container_of(work, struct ipw2100_priv,
2199 scan_event_later.work));
2202 static void ipw2100_scan_event_now(struct work_struct *work)
2204 send_scan_event(container_of(work, struct ipw2100_priv,
2208 static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
2210 IPW_DEBUG_SCAN("scan complete\n");
2211 /* Age the scan results... */
2212 priv->ieee->scans++;
2213 priv->status &= ~STATUS_SCANNING;
2215 /* Only userspace-requested scan completion events go out immediately */
2216 if (!priv->user_requested_scan) {
2217 if (!delayed_work_pending(&priv->scan_event_later))
2218 queue_delayed_work(priv->workqueue,
2219 &priv->scan_event_later,
2220 round_jiffies_relative(msecs_to_jiffies(4000)));
2222 priv->user_requested_scan = 0;
2223 cancel_delayed_work(&priv->scan_event_later);
2224 queue_work(priv->workqueue, &priv->scan_event_now);
2228 #ifdef CONFIG_IPW2100_DEBUG
2229 #define IPW2100_HANDLER(v, f) { v, f, # v }
2230 struct ipw2100_status_indicator {
2232 void (*cb) (struct ipw2100_priv * priv, u32 status);
2236 #define IPW2100_HANDLER(v, f) { v, f }
2237 struct ipw2100_status_indicator {
2239 void (*cb) (struct ipw2100_priv * priv, u32 status);
2241 #endif /* CONFIG_IPW2100_DEBUG */
2243 static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
2245 IPW_DEBUG_SCAN("Scanning...\n");
2246 priv->status |= STATUS_SCANNING;
2249 static const struct ipw2100_status_indicator status_handlers[] = {
2250 IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL),
2251 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL),
2252 IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
2253 IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
2254 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL),
2255 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
2256 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL),
2257 IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL),
2258 IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
2259 IPW2100_HANDLER(IPW_STATE_DISABLED, NULL),
2260 IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL),
2261 IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
2262 IPW2100_HANDLER(-1, NULL)
2265 static void isr_status_change(struct ipw2100_priv *priv, int status)
2269 if (status == IPW_STATE_SCANNING &&
2270 priv->status & STATUS_ASSOCIATED &&
2271 !(priv->status & STATUS_SCANNING)) {
2272 IPW_DEBUG_INFO("Scan detected while associated, with "
2273 "no scan request. Restarting firmware.\n");
2275 /* Wake up any sleeping jobs */
2276 schedule_reset(priv);
2279 for (i = 0; status_handlers[i].status != -1; i++) {
2280 if (status == status_handlers[i].status) {
2281 IPW_DEBUG_NOTIF("Status change: %s\n",
2282 status_handlers[i].name);
2283 if (status_handlers[i].cb)
2284 status_handlers[i].cb(priv, status);
2285 priv->wstats.status = status;
2290 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
2293 static void isr_rx_complete_command(struct ipw2100_priv *priv,
2294 struct ipw2100_cmd_header *cmd)
2296 #ifdef CONFIG_IPW2100_DEBUG
2297 if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
2298 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2299 command_types[cmd->host_command_reg],
2300 cmd->host_command_reg);
2303 if (cmd->host_command_reg == HOST_COMPLETE)
2304 priv->status |= STATUS_ENABLED;
2306 if (cmd->host_command_reg == CARD_DISABLE)
2307 priv->status &= ~STATUS_ENABLED;
2309 priv->status &= ~STATUS_CMD_ACTIVE;
2311 wake_up_interruptible(&priv->wait_command_queue);
2314 #ifdef CONFIG_IPW2100_DEBUG
2315 static const char *frame_types[] = {
2316 "COMMAND_STATUS_VAL",
2317 "STATUS_CHANGE_VAL",
2320 "HOST_NOTIFICATION_VAL"
2324 static int ipw2100_alloc_skb(struct ipw2100_priv *priv,
2325 struct ipw2100_rx_packet *packet)
2327 packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
2331 packet->rxp = (struct ipw2100_rx *)packet->skb->data;
2332 packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
2333 sizeof(struct ipw2100_rx),
2334 PCI_DMA_FROMDEVICE);
2335 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2341 #define SEARCH_ERROR 0xffffffff
2342 #define SEARCH_FAIL 0xfffffffe
2343 #define SEARCH_SUCCESS 0xfffffff0
2344 #define SEARCH_DISCARD 0
2345 #define SEARCH_SNAPSHOT 1
2347 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2348 static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
2351 if (!priv->snapshot[0])
2353 for (i = 0; i < 0x30; i++)
2354 kfree(priv->snapshot[i]);
2355 priv->snapshot[0] = NULL;
2358 #ifdef IPW2100_DEBUG_C3
2359 static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
2362 if (priv->snapshot[0])
2364 for (i = 0; i < 0x30; i++) {
2365 priv->snapshot[i] = kmalloc(0x1000, GFP_ATOMIC);
2366 if (!priv->snapshot[i]) {
2367 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2368 "buffer %d\n", priv->net_dev->name, i);
2370 kfree(priv->snapshot[--i]);
2371 priv->snapshot[0] = NULL;
2379 static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
2380 size_t len, int mode)
2388 if (mode == SEARCH_SNAPSHOT) {
2389 if (!ipw2100_snapshot_alloc(priv))
2390 mode = SEARCH_DISCARD;
2393 for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
2394 read_nic_dword(priv->net_dev, i, &tmp);
2395 if (mode == SEARCH_SNAPSHOT)
2396 *(u32 *) SNAPSHOT_ADDR(i) = tmp;
2397 if (ret == SEARCH_FAIL) {
2399 for (j = 0; j < 4; j++) {
2408 if ((s - in_buf) == len)
2409 ret = (i + j) - len + 1;
2411 } else if (mode == SEARCH_DISCARD)
2421 * 0) Disconnect the SKB from the firmware (just unmap)
2422 * 1) Pack the ETH header into the SKB
2423 * 2) Pass the SKB to the network stack
2425 * When packet is provided by the firmware, it contains the following:
2430 * The size of the constructed ethernet
2433 #ifdef IPW2100_RX_DEBUG
2434 static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
2437 static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
2439 #ifdef IPW2100_DEBUG_C3
2440 struct ipw2100_status *status = &priv->status_queue.drv[i];
2445 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2446 i * sizeof(struct ipw2100_status));
2448 #ifdef IPW2100_DEBUG_C3
2449 /* Halt the firmware so we can get a good image */
2450 write_register(priv->net_dev, IPW_REG_RESET_REG,
2451 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
2454 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
2455 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
2457 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
2461 match = ipw2100_match_buf(priv, (u8 *) status,
2462 sizeof(struct ipw2100_status),
2464 if (match < SEARCH_SUCCESS)
2465 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2466 "offset 0x%06X, length %d:\n",
2467 priv->net_dev->name, match,
2468 sizeof(struct ipw2100_status));
2470 IPW_DEBUG_INFO("%s: No DMA status match in "
2471 "Firmware.\n", priv->net_dev->name);
2473 printk_buf((u8 *) priv->status_queue.drv,
2474 sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
2477 priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
2478 priv->net_dev->stats.rx_errors++;
2479 schedule_reset(priv);
2482 static void isr_rx(struct ipw2100_priv *priv, int i,
2483 struct libipw_rx_stats *stats)
2485 struct net_device *dev = priv->net_dev;
2486 struct ipw2100_status *status = &priv->status_queue.drv[i];
2487 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2489 IPW_DEBUG_RX("Handler...\n");
2491 if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
2492 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2495 status->frame_size, skb_tailroom(packet->skb));
2496 dev->stats.rx_errors++;
2500 if (unlikely(!netif_running(dev))) {
2501 dev->stats.rx_errors++;
2502 priv->wstats.discard.misc++;
2503 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2507 if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
2508 !(priv->status & STATUS_ASSOCIATED))) {
2509 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2510 priv->wstats.discard.misc++;
2514 pci_unmap_single(priv->pci_dev,
2516 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2518 skb_put(packet->skb, status->frame_size);
2520 #ifdef IPW2100_RX_DEBUG
2521 /* Make a copy of the frame so we can dump it to the logs if
2522 * libipw_rx fails */
2523 skb_copy_from_linear_data(packet->skb, packet_data,
2524 min_t(u32, status->frame_size,
2525 IPW_RX_NIC_BUFFER_LENGTH));
2528 if (!libipw_rx(priv->ieee, packet->skb, stats)) {
2529 #ifdef IPW2100_RX_DEBUG
2530 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2532 printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
2534 dev->stats.rx_errors++;
2536 /* libipw_rx failed, so it didn't free the SKB */
2537 dev_kfree_skb_any(packet->skb);
2541 /* We need to allocate a new SKB and attach it to the RDB. */
2542 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2543 printk(KERN_WARNING DRV_NAME ": "
2544 "%s: Unable to allocate SKB onto RBD ring - disabling "
2545 "adapter.\n", dev->name);
2546 /* TODO: schedule adapter shutdown */
2547 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2550 /* Update the RDB entry */
2551 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2554 #ifdef CONFIG_IPW2100_MONITOR
2556 static void isr_rx_monitor(struct ipw2100_priv *priv, int i,
2557 struct libipw_rx_stats *stats)
2559 struct net_device *dev = priv->net_dev;
2560 struct ipw2100_status *status = &priv->status_queue.drv[i];
2561 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2563 /* Magic struct that slots into the radiotap header -- no reason
2564 * to build this manually element by element, we can write it much
2565 * more efficiently than we can parse it. ORDER MATTERS HERE */
2567 struct ieee80211_radiotap_header rt_hdr;
2568 s8 rt_dbmsignal; /* signal in dbM, kluged to signed */
2571 IPW_DEBUG_RX("Handler...\n");
2573 if (unlikely(status->frame_size > skb_tailroom(packet->skb) -
2574 sizeof(struct ipw_rt_hdr))) {
2575 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2579 skb_tailroom(packet->skb));
2580 dev->stats.rx_errors++;
2584 if (unlikely(!netif_running(dev))) {
2585 dev->stats.rx_errors++;
2586 priv->wstats.discard.misc++;
2587 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2591 if (unlikely(priv->config & CFG_CRC_CHECK &&
2592 status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
2593 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2594 dev->stats.rx_errors++;
2598 pci_unmap_single(priv->pci_dev, packet->dma_addr,
2599 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2600 memmove(packet->skb->data + sizeof(struct ipw_rt_hdr),
2601 packet->skb->data, status->frame_size);
2603 ipw_rt = (struct ipw_rt_hdr *) packet->skb->data;
2605 ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
2606 ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */
2607 ipw_rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct ipw_rt_hdr)); /* total hdr+data */
2609 ipw_rt->rt_hdr.it_present = cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL);
2611 ipw_rt->rt_dbmsignal = status->rssi + IPW2100_RSSI_TO_DBM;
2613 skb_put(packet->skb, status->frame_size + sizeof(struct ipw_rt_hdr));
2615 if (!libipw_rx(priv->ieee, packet->skb, stats)) {
2616 dev->stats.rx_errors++;
2618 /* libipw_rx failed, so it didn't free the SKB */
2619 dev_kfree_skb_any(packet->skb);
2623 /* We need to allocate a new SKB and attach it to the RDB. */
2624 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2626 "%s: Unable to allocate SKB onto RBD ring - disabling "
2627 "adapter.\n", dev->name);
2628 /* TODO: schedule adapter shutdown */
2629 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2632 /* Update the RDB entry */
2633 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2638 static int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
2640 struct ipw2100_status *status = &priv->status_queue.drv[i];
2641 struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
2642 u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
2644 switch (frame_type) {
2645 case COMMAND_STATUS_VAL:
2646 return (status->frame_size != sizeof(u->rx_data.command));
2647 case STATUS_CHANGE_VAL:
2648 return (status->frame_size != sizeof(u->rx_data.status));
2649 case HOST_NOTIFICATION_VAL:
2650 return (status->frame_size < sizeof(u->rx_data.notification));
2651 case P80211_DATA_VAL:
2652 case P8023_DATA_VAL:
2653 #ifdef CONFIG_IPW2100_MONITOR
2656 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
2657 case IEEE80211_FTYPE_MGMT:
2658 case IEEE80211_FTYPE_CTL:
2660 case IEEE80211_FTYPE_DATA:
2661 return (status->frame_size >
2662 IPW_MAX_802_11_PAYLOAD_LENGTH);
2671 * ipw2100 interrupts are disabled at this point, and the ISR
2672 * is the only code that calls this method. So, we do not need
2673 * to play with any locks.
2675 * RX Queue works as follows:
2677 * Read index - firmware places packet in entry identified by the
2678 * Read index and advances Read index. In this manner,
2679 * Read index will always point to the next packet to
2680 * be filled--but not yet valid.
2682 * Write index - driver fills this entry with an unused RBD entry.
2683 * This entry has not filled by the firmware yet.
2685 * In between the W and R indexes are the RBDs that have been received
2686 * but not yet processed.
2688 * The process of handling packets will start at WRITE + 1 and advance
2689 * until it reaches the READ index.
2691 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2694 static void __ipw2100_rx_process(struct ipw2100_priv *priv)
2696 struct ipw2100_bd_queue *rxq = &priv->rx_queue;
2697 struct ipw2100_status_queue *sq = &priv->status_queue;
2698 struct ipw2100_rx_packet *packet;
2701 struct ipw2100_rx *u;
2702 struct libipw_rx_stats stats = {
2703 .mac_time = jiffies,
2706 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
2707 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
2709 if (r >= rxq->entries) {
2710 IPW_DEBUG_RX("exit - bad read index\n");
2714 i = (rxq->next + 1) % rxq->entries;
2717 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2718 r, rxq->next, i); */
2720 packet = &priv->rx_buffers[i];
2722 /* Sync the DMA for the STATUS buffer so CPU is sure to get
2723 * the correct values */
2724 pci_dma_sync_single_for_cpu(priv->pci_dev,
2726 sizeof(struct ipw2100_status) * i,
2727 sizeof(struct ipw2100_status),
2728 PCI_DMA_FROMDEVICE);
2730 /* Sync the DMA for the RX buffer so CPU is sure to get
2731 * the correct values */
2732 pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
2733 sizeof(struct ipw2100_rx),
2734 PCI_DMA_FROMDEVICE);
2736 if (unlikely(ipw2100_corruption_check(priv, i))) {
2737 ipw2100_corruption_detected(priv, i);
2742 frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK;
2743 stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
2744 stats.len = sq->drv[i].frame_size;
2747 if (stats.rssi != 0)
2748 stats.mask |= LIBIPW_STATMASK_RSSI;
2749 stats.freq = LIBIPW_24GHZ_BAND;
2751 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2752 priv->net_dev->name, frame_types[frame_type],
2755 switch (frame_type) {
2756 case COMMAND_STATUS_VAL:
2757 /* Reset Rx watchdog */
2758 isr_rx_complete_command(priv, &u->rx_data.command);
2761 case STATUS_CHANGE_VAL:
2762 isr_status_change(priv, u->rx_data.status);
2765 case P80211_DATA_VAL:
2766 case P8023_DATA_VAL:
2767 #ifdef CONFIG_IPW2100_MONITOR
2768 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
2769 isr_rx_monitor(priv, i, &stats);
2773 if (stats.len < sizeof(struct libipw_hdr_3addr))
2775 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
2776 case IEEE80211_FTYPE_MGMT:
2777 libipw_rx_mgt(priv->ieee,
2778 &u->rx_data.header, &stats);
2781 case IEEE80211_FTYPE_CTL:
2784 case IEEE80211_FTYPE_DATA:
2785 isr_rx(priv, i, &stats);
2793 /* clear status field associated with this RBD */
2794 rxq->drv[i].status.info.field = 0;
2796 i = (i + 1) % rxq->entries;
2800 /* backtrack one entry, wrapping to end if at 0 */
2801 rxq->next = (i ? i : rxq->entries) - 1;
2803 write_register(priv->net_dev,
2804 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, rxq->next);
2809 * __ipw2100_tx_process
2811 * This routine will determine whether the next packet on
2812 * the fw_pend_list has been processed by the firmware yet.
2814 * If not, then it does nothing and returns.
2816 * If so, then it removes the item from the fw_pend_list, frees
2817 * any associated storage, and places the item back on the
2818 * free list of its source (either msg_free_list or tx_free_list)
2820 * TX Queue works as follows:
2822 * Read index - points to the next TBD that the firmware will
2823 * process. The firmware will read the data, and once
2824 * done processing, it will advance the Read index.
2826 * Write index - driver fills this entry with an constructed TBD
2827 * entry. The Write index is not advanced until the
2828 * packet has been configured.
2830 * In between the W and R indexes are the TBDs that have NOT been
2831 * processed. Lagging behind the R index are packets that have
2832 * been processed but have not been freed by the driver.
2834 * In order to free old storage, an internal index will be maintained
2835 * that points to the next packet to be freed. When all used
2836 * packets have been freed, the oldest index will be the same as the
2837 * firmware's read index.
2839 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2841 * Because the TBD structure can not contain arbitrary data, the
2842 * driver must keep an internal queue of cached allocations such that
2843 * it can put that data back into the tx_free_list and msg_free_list
2844 * for use by future command and data packets.
2847 static int __ipw2100_tx_process(struct ipw2100_priv *priv)
2849 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2850 struct ipw2100_bd *tbd;
2851 struct list_head *element;
2852 struct ipw2100_tx_packet *packet;
2853 int descriptors_used;
2855 u32 r, w, frag_num = 0;
2857 if (list_empty(&priv->fw_pend_list))
2860 element = priv->fw_pend_list.next;
2862 packet = list_entry(element, struct ipw2100_tx_packet, list);
2863 tbd = &txq->drv[packet->index];
2865 /* Determine how many TBD entries must be finished... */
2866 switch (packet->type) {
2868 /* COMMAND uses only one slot; don't advance */
2869 descriptors_used = 1;
2874 /* DATA uses two slots; advance and loop position. */
2875 descriptors_used = tbd->num_fragments;
2876 frag_num = tbd->num_fragments - 1;
2877 e = txq->oldest + frag_num;
2882 printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
2883 priv->net_dev->name);
2887 /* if the last TBD is not done by NIC yet, then packet is
2888 * not ready to be released.
2891 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
2893 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2896 printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
2897 priv->net_dev->name);
2900 * txq->next is the index of the last packet written txq->oldest is
2901 * the index of the r is the index of the next packet to be read by
2906 * Quick graphic to help you visualize the following
2907 * if / else statement
2909 * ===>| s---->|===============
2911 * | a | b | c | d | e | f | g | h | i | j | k | l
2915 * w - updated by driver
2916 * r - updated by firmware
2917 * s - start of oldest BD entry (txq->oldest)
2918 * e - end of oldest BD entry
2921 if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
2922 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2927 DEC_STAT(&priv->fw_pend_stat);
2929 #ifdef CONFIG_IPW2100_DEBUG
2932 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2934 (u32) (txq->nic + i * sizeof(struct ipw2100_bd)),
2935 txq->drv[i].host_addr, txq->drv[i].buf_length);
2937 if (packet->type == DATA) {
2938 i = (i + 1) % txq->entries;
2940 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2942 (u32) (txq->nic + i *
2943 sizeof(struct ipw2100_bd)),
2944 (u32) txq->drv[i].host_addr,
2945 txq->drv[i].buf_length);
2950 switch (packet->type) {
2952 if (txq->drv[txq->oldest].status.info.fields.txType != 0)
2953 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2954 "Expecting DATA TBD but pulled "
2955 "something else: ids %d=%d.\n",
2956 priv->net_dev->name, txq->oldest, packet->index);
2958 /* DATA packet; we have to unmap and free the SKB */
2959 for (i = 0; i < frag_num; i++) {
2960 tbd = &txq->drv[(packet->index + 1 + i) % txq->entries];
2962 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2963 (packet->index + 1 + i) % txq->entries,
2964 tbd->host_addr, tbd->buf_length);
2966 pci_unmap_single(priv->pci_dev,
2968 tbd->buf_length, PCI_DMA_TODEVICE);
2971 libipw_txb_free(packet->info.d_struct.txb);
2972 packet->info.d_struct.txb = NULL;
2974 list_add_tail(element, &priv->tx_free_list);
2975 INC_STAT(&priv->tx_free_stat);
2977 /* We have a free slot in the Tx queue, so wake up the
2978 * transmit layer if it is stopped. */
2979 if (priv->status & STATUS_ASSOCIATED)
2980 netif_wake_queue(priv->net_dev);
2982 /* A packet was processed by the hardware, so update the
2984 priv->net_dev->trans_start = jiffies;
2989 if (txq->drv[txq->oldest].status.info.fields.txType != 1)
2990 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2991 "Expecting COMMAND TBD but pulled "
2992 "something else: ids %d=%d.\n",
2993 priv->net_dev->name, txq->oldest, packet->index);
2995 #ifdef CONFIG_IPW2100_DEBUG
2996 if (packet->info.c_struct.cmd->host_command_reg <
2997 ARRAY_SIZE(command_types))
2998 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2999 command_types[packet->info.c_struct.cmd->
3001 packet->info.c_struct.cmd->
3003 packet->info.c_struct.cmd->cmd_status_reg);
3006 list_add_tail(element, &priv->msg_free_list);
3007 INC_STAT(&priv->msg_free_stat);
3011 /* advance oldest used TBD pointer to start of next entry */
3012 txq->oldest = (e + 1) % txq->entries;
3013 /* increase available TBDs number */
3014 txq->available += descriptors_used;
3015 SET_STAT(&priv->txq_stat, txq->available);
3017 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
3018 jiffies - packet->jiffy_start);
3020 return (!list_empty(&priv->fw_pend_list));
3023 static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
3027 while (__ipw2100_tx_process(priv) && i < 200)
3031 printk(KERN_WARNING DRV_NAME ": "
3032 "%s: Driver is running slow (%d iters).\n",
3033 priv->net_dev->name, i);
3037 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv)
3039 struct list_head *element;
3040 struct ipw2100_tx_packet *packet;
3041 struct ipw2100_bd_queue *txq = &priv->tx_queue;
3042 struct ipw2100_bd *tbd;
3043 int next = txq->next;
3045 while (!list_empty(&priv->msg_pend_list)) {
3046 /* if there isn't enough space in TBD queue, then
3047 * don't stuff a new one in.
3048 * NOTE: 3 are needed as a command will take one,
3049 * and there is a minimum of 2 that must be
3050 * maintained between the r and w indexes
3052 if (txq->available <= 3) {
3053 IPW_DEBUG_TX("no room in tx_queue\n");
3057 element = priv->msg_pend_list.next;
3059 DEC_STAT(&priv->msg_pend_stat);
3061 packet = list_entry(element, struct ipw2100_tx_packet, list);
3063 IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
3064 &txq->drv[txq->next],
3065 (void *)(txq->nic + txq->next *
3066 sizeof(struct ipw2100_bd)));
3068 packet->index = txq->next;
3070 tbd = &txq->drv[txq->next];
3072 /* initialize TBD */
3073 tbd->host_addr = packet->info.c_struct.cmd_phys;
3074 tbd->buf_length = sizeof(struct ipw2100_cmd_header);
3075 /* not marking number of fragments causes problems
3076 * with f/w debug version */
3077 tbd->num_fragments = 1;
3078 tbd->status.info.field =
3079 IPW_BD_STATUS_TX_FRAME_COMMAND |
3080 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
3082 /* update TBD queue counters */
3084 txq->next %= txq->entries;
3086 DEC_STAT(&priv->txq_stat);
3088 list_add_tail(element, &priv->fw_pend_list);
3089 INC_STAT(&priv->fw_pend_stat);
3092 if (txq->next != next) {
3093 /* kick off the DMA by notifying firmware the
3094 * write index has moved; make sure TBD stores are sync'd */
3096 write_register(priv->net_dev,
3097 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3103 * ipw2100_tx_send_data
3106 static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
3108 struct list_head *element;
3109 struct ipw2100_tx_packet *packet;
3110 struct ipw2100_bd_queue *txq = &priv->tx_queue;
3111 struct ipw2100_bd *tbd;
3112 int next = txq->next;
3114 struct ipw2100_data_header *ipw_hdr;
3115 struct libipw_hdr_3addr *hdr;
3117 while (!list_empty(&priv->tx_pend_list)) {
3118 /* if there isn't enough space in TBD queue, then
3119 * don't stuff a new one in.
3120 * NOTE: 4 are needed as a data will take two,
3121 * and there is a minimum of 2 that must be
3122 * maintained between the r and w indexes
3124 element = priv->tx_pend_list.next;
3125 packet = list_entry(element, struct ipw2100_tx_packet, list);
3127 if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
3129 /* TODO: Support merging buffers if more than
3130 * IPW_MAX_BDS are used */
3131 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3132 "Increase fragmentation level.\n",
3133 priv->net_dev->name);
3136 if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) {
3137 IPW_DEBUG_TX("no room in tx_queue\n");
3142 DEC_STAT(&priv->tx_pend_stat);
3144 tbd = &txq->drv[txq->next];
3146 packet->index = txq->next;
3148 ipw_hdr = packet->info.d_struct.data;
3149 hdr = (struct libipw_hdr_3addr *)packet->info.d_struct.txb->
3152 if (priv->ieee->iw_mode == IW_MODE_INFRA) {
3153 /* To DS: Addr1 = BSSID, Addr2 = SA,
3155 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3156 memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
3157 } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
3158 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3160 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3161 memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
3164 ipw_hdr->host_command_reg = SEND;
3165 ipw_hdr->host_command_reg1 = 0;
3167 /* For now we only support host based encryption */
3168 ipw_hdr->needs_encryption = 0;
3169 ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
3170 if (packet->info.d_struct.txb->nr_frags > 1)
3171 ipw_hdr->fragment_size =
3172 packet->info.d_struct.txb->frag_size -
3175 ipw_hdr->fragment_size = 0;
3177 tbd->host_addr = packet->info.d_struct.data_phys;
3178 tbd->buf_length = sizeof(struct ipw2100_data_header);
3179 tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
3180 tbd->status.info.field =
3181 IPW_BD_STATUS_TX_FRAME_802_3 |
3182 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3184 txq->next %= txq->entries;
3186 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3187 packet->index, tbd->host_addr, tbd->buf_length);
3188 #ifdef CONFIG_IPW2100_DEBUG
3189 if (packet->info.d_struct.txb->nr_frags > 1)
3190 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3191 packet->info.d_struct.txb->nr_frags);
3194 for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
3195 tbd = &txq->drv[txq->next];
3196 if (i == packet->info.d_struct.txb->nr_frags - 1)
3197 tbd->status.info.field =
3198 IPW_BD_STATUS_TX_FRAME_802_3 |
3199 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
3201 tbd->status.info.field =
3202 IPW_BD_STATUS_TX_FRAME_802_3 |
3203 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3205 tbd->buf_length = packet->info.d_struct.txb->
3206 fragments[i]->len - LIBIPW_3ADDR_LEN;
3208 tbd->host_addr = pci_map_single(priv->pci_dev,
3209 packet->info.d_struct.
3216 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3217 txq->next, tbd->host_addr,
3220 pci_dma_sync_single_for_device(priv->pci_dev,
3226 txq->next %= txq->entries;
3229 txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
3230 SET_STAT(&priv->txq_stat, txq->available);
3232 list_add_tail(element, &priv->fw_pend_list);
3233 INC_STAT(&priv->fw_pend_stat);
3236 if (txq->next != next) {
3237 /* kick off the DMA by notifying firmware the
3238 * write index has moved; make sure TBD stores are sync'd */
3239 write_register(priv->net_dev,
3240 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3245 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
3247 struct net_device *dev = priv->net_dev;
3248 unsigned long flags;
3251 spin_lock_irqsave(&priv->low_lock, flags);
3252 ipw2100_disable_interrupts(priv);
3254 read_register(dev, IPW_REG_INTA, &inta);
3256 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3257 (unsigned long)inta & IPW_INTERRUPT_MASK);
3262 /* We do not loop and keep polling for more interrupts as this
3263 * is frowned upon and doesn't play nicely with other potentially
3265 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3266 (unsigned long)inta & IPW_INTERRUPT_MASK);
3268 if (inta & IPW2100_INTA_FATAL_ERROR) {
3269 printk(KERN_WARNING DRV_NAME
3270 ": Fatal interrupt. Scheduling firmware restart.\n");
3272 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR);
3274 read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
3275 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3276 priv->net_dev->name, priv->fatal_error);
3278 read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
3279 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3280 priv->net_dev->name, tmp);
3282 /* Wake up any sleeping jobs */
3283 schedule_reset(priv);
3286 if (inta & IPW2100_INTA_PARITY_ERROR) {
3287 printk(KERN_ERR DRV_NAME
3288 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3290 write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR);
3293 if (inta & IPW2100_INTA_RX_TRANSFER) {
3294 IPW_DEBUG_ISR("RX interrupt\n");
3296 priv->rx_interrupts++;
3298 write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER);
3300 __ipw2100_rx_process(priv);
3301 __ipw2100_tx_complete(priv);
3304 if (inta & IPW2100_INTA_TX_TRANSFER) {
3305 IPW_DEBUG_ISR("TX interrupt\n");
3307 priv->tx_interrupts++;
3309 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER);
3311 __ipw2100_tx_complete(priv);
3312 ipw2100_tx_send_commands(priv);
3313 ipw2100_tx_send_data(priv);
3316 if (inta & IPW2100_INTA_TX_COMPLETE) {
3317 IPW_DEBUG_ISR("TX complete\n");
3319 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE);
3321 __ipw2100_tx_complete(priv);
3324 if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
3325 /* ipw2100_handle_event(dev); */
3327 write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT);
3330 if (inta & IPW2100_INTA_FW_INIT_DONE) {
3331 IPW_DEBUG_ISR("FW init done interrupt\n");
3334 read_register(dev, IPW_REG_INTA, &tmp);
3335 if (tmp & (IPW2100_INTA_FATAL_ERROR |
3336 IPW2100_INTA_PARITY_ERROR)) {
3337 write_register(dev, IPW_REG_INTA,
3338 IPW2100_INTA_FATAL_ERROR |
3339 IPW2100_INTA_PARITY_ERROR);
3342 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE);
3345 if (inta & IPW2100_INTA_STATUS_CHANGE) {
3346 IPW_DEBUG_ISR("Status change interrupt\n");
3348 write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE);
3351 if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
3352 IPW_DEBUG_ISR("slave host mode interrupt\n");
3354 write_register(dev, IPW_REG_INTA,
3355 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
3359 ipw2100_enable_interrupts(priv);
3361 spin_unlock_irqrestore(&priv->low_lock, flags);
3363 IPW_DEBUG_ISR("exit\n");
3366 static irqreturn_t ipw2100_interrupt(int irq, void *data)
3368 struct ipw2100_priv *priv = data;
3369 u32 inta, inta_mask;
3374 spin_lock(&priv->low_lock);
3376 /* We check to see if we should be ignoring interrupts before
3377 * we touch the hardware. During ucode load if we try and handle
3378 * an interrupt we can cause keyboard problems as well as cause
3379 * the ucode to fail to initialize */
3380 if (!(priv->status & STATUS_INT_ENABLED)) {
3385 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
3386 read_register(priv->net_dev, IPW_REG_INTA, &inta);
3388 if (inta == 0xFFFFFFFF) {
3389 /* Hardware disappeared */
3390 printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
3394 inta &= IPW_INTERRUPT_MASK;
3396 if (!(inta & inta_mask)) {
3397 /* Shared interrupt */
3401 /* We disable the hardware interrupt here just to prevent unneeded
3402 * calls to be made. We disable this again within the actual
3403 * work tasklet, so if another part of the code re-enables the
3404 * interrupt, that is fine */
3405 ipw2100_disable_interrupts(priv);
3407 tasklet_schedule(&priv->irq_tasklet);
3408 spin_unlock(&priv->low_lock);
3412 spin_unlock(&priv->low_lock);
3416 static netdev_tx_t ipw2100_tx(struct libipw_txb *txb,
3417 struct net_device *dev, int pri)
3419 struct ipw2100_priv *priv = libipw_priv(dev);
3420 struct list_head *element;
3421 struct ipw2100_tx_packet *packet;
3422 unsigned long flags;
3424 spin_lock_irqsave(&priv->low_lock, flags);
3426 if (!(priv->status & STATUS_ASSOCIATED)) {
3427 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3428 priv->net_dev->stats.tx_carrier_errors++;
3429 netif_stop_queue(dev);
3433 if (list_empty(&priv->tx_free_list))
3436 element = priv->tx_free_list.next;
3437 packet = list_entry(element, struct ipw2100_tx_packet, list);
3439 packet->info.d_struct.txb = txb;
3441 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb->fragments[0]->len);
3442 printk_buf(IPW_DL_TX, txb->fragments[0]->data, txb->fragments[0]->len);
3444 packet->jiffy_start = jiffies;
3447 DEC_STAT(&priv->tx_free_stat);
3449 list_add_tail(element, &priv->tx_pend_list);
3450 INC_STAT(&priv->tx_pend_stat);
3452 ipw2100_tx_send_data(priv);
3454 spin_unlock_irqrestore(&priv->low_lock, flags);
3455 return NETDEV_TX_OK;
3458 netif_stop_queue(dev);
3459 spin_unlock_irqrestore(&priv->low_lock, flags);
3460 return NETDEV_TX_BUSY;
3463 static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
3465 int i, j, err = -EINVAL;
3470 (struct ipw2100_tx_packet *)kmalloc(IPW_COMMAND_POOL_SIZE *
3474 if (!priv->msg_buffers) {
3475 printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg "
3476 "buffers.\n", priv->net_dev->name);
3480 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3481 v = pci_alloc_consistent(priv->pci_dev,
3482 sizeof(struct ipw2100_cmd_header), &p);
3484 printk(KERN_ERR DRV_NAME ": "
3485 "%s: PCI alloc failed for msg "
3486 "buffers.\n", priv->net_dev->name);
3491 memset(v, 0, sizeof(struct ipw2100_cmd_header));
3493 priv->msg_buffers[i].type = COMMAND;
3494 priv->msg_buffers[i].info.c_struct.cmd =
3495 (struct ipw2100_cmd_header *)v;
3496 priv->msg_buffers[i].info.c_struct.cmd_phys = p;
3499 if (i == IPW_COMMAND_POOL_SIZE)
3502 for (j = 0; j < i; j++) {
3503 pci_free_consistent(priv->pci_dev,
3504 sizeof(struct ipw2100_cmd_header),
3505 priv->msg_buffers[j].info.c_struct.cmd,
3506 priv->msg_buffers[j].info.c_struct.
3510 kfree(priv->msg_buffers);
3511 priv->msg_buffers = NULL;
3516 static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
3520 INIT_LIST_HEAD(&priv->msg_free_list);
3521 INIT_LIST_HEAD(&priv->msg_pend_list);
3523 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
3524 list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
3525 SET_STAT(&priv->msg_free_stat, i);
3530 static void ipw2100_msg_free(struct ipw2100_priv *priv)
3534 if (!priv->msg_buffers)
3537 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3538 pci_free_consistent(priv->pci_dev,
3539 sizeof(struct ipw2100_cmd_header),
3540 priv->msg_buffers[i].info.c_struct.cmd,
3541 priv->msg_buffers[i].info.c_struct.
3545 kfree(priv->msg_buffers);
3546 priv->msg_buffers = NULL;
3549 static ssize_t show_pci(struct device *d, struct device_attribute *attr,
3552 struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
3557 for (i = 0; i < 16; i++) {
3558 out += sprintf(out, "[%08X] ", i * 16);
3559 for (j = 0; j < 16; j += 4) {
3560 pci_read_config_dword(pci_dev, i * 16 + j, &val);
3561 out += sprintf(out, "%08X ", val);
3563 out += sprintf(out, "\n");
3569 static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
3571 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
3574 struct ipw2100_priv *p = dev_get_drvdata(d);
3575 return sprintf(buf, "0x%08x\n", (int)p->config);
3578 static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
3580 static ssize_t show_status(struct device *d, struct device_attribute *attr,
3583 struct ipw2100_priv *p = dev_get_drvdata(d);
3584 return sprintf(buf, "0x%08x\n", (int)p->status);
3587 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
3589 static ssize_t show_capability(struct device *d, struct device_attribute *attr,
3592 struct ipw2100_priv *p = dev_get_drvdata(d);
3593 return sprintf(buf, "0x%08x\n", (int)p->capability);
3596 static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
3598 #define IPW2100_REG(x) { IPW_ ##x, #x }
3599 static const struct {
3603 IPW2100_REG(REG_GP_CNTRL),
3604 IPW2100_REG(REG_GPIO),
3605 IPW2100_REG(REG_INTA),
3606 IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),};
3607 #define IPW2100_NIC(x, s) { x, #x, s }
3608 static const struct {
3613 IPW2100_NIC(IPW2100_CONTROL_REG, 2),
3614 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3615 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3616 static const struct {
3621 IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
3622 IPW2100_ORD(STAT_TX_HOST_COMPLETE,
3623 "successful Host Tx's (MSDU)"),
3624 IPW2100_ORD(STAT_TX_DIR_DATA,
3625 "successful Directed Tx's (MSDU)"),
3626 IPW2100_ORD(STAT_TX_DIR_DATA1,
3627 "successful Directed Tx's (MSDU) @ 1MB"),
3628 IPW2100_ORD(STAT_TX_DIR_DATA2,
3629 "successful Directed Tx's (MSDU) @ 2MB"),
3630 IPW2100_ORD(STAT_TX_DIR_DATA5_5,
3631 "successful Directed Tx's (MSDU) @ 5_5MB"),
3632 IPW2100_ORD(STAT_TX_DIR_DATA11,
3633 "successful Directed Tx's (MSDU) @ 11MB"),
3634 IPW2100_ORD(STAT_TX_NODIR_DATA1,
3635 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3636 IPW2100_ORD(STAT_TX_NODIR_DATA2,
3637 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3638 IPW2100_ORD(STAT_TX_NODIR_DATA5_5,
3639 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3640 IPW2100_ORD(STAT_TX_NODIR_DATA11,
3641 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3642 IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
3643 IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
3644 IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
3645 IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
3646 IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
3647 IPW2100_ORD(STAT_TX_ASSN_RESP,
3648 "successful Association response Tx's"),
3649 IPW2100_ORD(STAT_TX_REASSN,
3650 "successful Reassociation Tx's"),
3651 IPW2100_ORD(STAT_TX_REASSN_RESP,
3652 "successful Reassociation response Tx's"),
3653 IPW2100_ORD(STAT_TX_PROBE,
3654 "probes successfully transmitted"),
3655 IPW2100_ORD(STAT_TX_PROBE_RESP,
3656 "probe responses successfully transmitted"),
3657 IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
3658 IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
3659 IPW2100_ORD(STAT_TX_DISASSN,
3660 "successful Disassociation TX"),
3661 IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
3662 IPW2100_ORD(STAT_TX_DEAUTH,
3663 "successful Deauthentication TX"),
3664 IPW2100_ORD(STAT_TX_TOTAL_BYTES,
3665 "Total successful Tx data bytes"),
3666 IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
3667 IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
3668 IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
3669 IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
3670 IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
3671 IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
3672 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,
3673 "times max tries in a hop failed"),
3674 IPW2100_ORD(STAT_TX_DISASSN_FAIL,
3675 "times disassociation failed"),
3676 IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
3677 IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
3678 IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
3679 IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
3680 IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
3681 IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
3682 IPW2100_ORD(STAT_RX_DIR_DATA5_5,
3683 "directed packets at 5.5MB"),
3684 IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
3685 IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets"),
3686 IPW2100_ORD(STAT_RX_NODIR_DATA1,
3687 "nondirected packets at 1MB"),
3688 IPW2100_ORD(STAT_RX_NODIR_DATA2,
3689 "nondirected packets at 2MB"),
3690 IPW2100_ORD(STAT_RX_NODIR_DATA5_5,
3691 "nondirected packets at 5.5MB"),
3692 IPW2100_ORD(STAT_RX_NODIR_DATA11,
3693 "nondirected packets at 11MB"),
3694 IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
3695 IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS,
3697 IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
3698 IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
3699 IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
3700 IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
3701 IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
3702 IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
3703 IPW2100_ORD(STAT_RX_REASSN_RESP,
3704 "Reassociation response Rx's"),
3705 IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
3706 IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
3707 IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
3708 IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
3709 IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
3710 IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
3711 IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
3712 IPW2100_ORD(STAT_RX_TOTAL_BYTES,
3713 "Total rx data bytes received"),
3714 IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
3715 IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
3716 IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
3717 IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
3718 IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
3719 IPW2100_ORD(STAT_RX_DUPLICATE1,
3720 "duplicate rx packets at 1MB"),
3721 IPW2100_ORD(STAT_RX_DUPLICATE2,
3722 "duplicate rx packets at 2MB"),
3723 IPW2100_ORD(STAT_RX_DUPLICATE5_5,
3724 "duplicate rx packets at 5.5MB"),
3725 IPW2100_ORD(STAT_RX_DUPLICATE11,
3726 "duplicate rx packets at 11MB"),
3727 IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
3728 IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
3729 IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
3730 IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
3731 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL,
3732 "rx frames with invalid protocol"),
3733 IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
3734 IPW2100_ORD(STAT_RX_NO_BUFFER,
3735 "rx frames rejected due to no buffer"),
3736 IPW2100_ORD(STAT_RX_MISSING_FRAG,
3737 "rx frames dropped due to missing fragment"),
3738 IPW2100_ORD(STAT_RX_ORPHAN_FRAG,
3739 "rx frames dropped due to non-sequential fragment"),
3740 IPW2100_ORD(STAT_RX_ORPHAN_FRAME,
3741 "rx frames dropped due to unmatched 1st frame"),
3742 IPW2100_ORD(STAT_RX_FRAG_AGEOUT,
3743 "rx frames dropped due to uncompleted frame"),
3744 IPW2100_ORD(STAT_RX_ICV_ERRORS,
3745 "ICV errors during decryption"),
3746 IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended"),
3747 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
3748 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT,
3749 "poll response timeouts"),
3750 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT,
3751 "timeouts waiting for last {broad,multi}cast pkt"),
3752 IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
3753 IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
3754 IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID"),
3755 IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
3756 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,
3757 "current calculation of % missed beacons"),
3758 IPW2100_ORD(STAT_PERCENT_RETRIES,
3759 "current calculation of % missed tx retries"),
3760 IPW2100_ORD(ASSOCIATED_AP_PTR,
3761 "0 if not associated, else pointer to AP table entry"),
3762 IPW2100_ORD(AVAILABLE_AP_CNT,
3763 "AP's decsribed in the AP table"),
3764 IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
3765 IPW2100_ORD(STAT_AP_ASSNS, "associations"),
3766 IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
3767 IPW2100_ORD(STAT_ASSN_RESP_FAIL,
3768 "failures due to response fail"),
3769 IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
3770 IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
3771 IPW2100_ORD(STAT_ROAM_INHIBIT,
3772 "times roaming was inhibited due to activity"),
3773 IPW2100_ORD(RSSI_AT_ASSN,
3774 "RSSI of associated AP at time of association"),
3775 IPW2100_ORD(STAT_ASSN_CAUSE1,
3776 "reassociation: no probe response or TX on hop"),
3777 IPW2100_ORD(STAT_ASSN_CAUSE2,
3778 "reassociation: poor tx/rx quality"),
3779 IPW2100_ORD(STAT_ASSN_CAUSE3,
3780 "reassociation: tx/rx quality (excessive AP load"),
3781 IPW2100_ORD(STAT_ASSN_CAUSE4,
3782 "reassociation: AP RSSI level"),
3783 IPW2100_ORD(STAT_ASSN_CAUSE5,
3784 "reassociations due to load leveling"),
3785 IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
3786 IPW2100_ORD(STAT_AUTH_RESP_FAIL,
3787 "times authentication response failed"),
3788 IPW2100_ORD(STATION_TABLE_CNT,
3789 "entries in association table"),
3790 IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
3791 IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
3792 IPW2100_ORD(COUNTRY_CODE,
3793 "IEEE country code as recv'd from beacon"),
3794 IPW2100_ORD(COUNTRY_CHANNELS,
3795 "channels suported by country"),
3796 IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
3797 IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
3798 IPW2100_ORD(ANTENNA_DIVERSITY,
3799 "TRUE if antenna diversity is disabled"),
3800 IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
3801 IPW2100_ORD(OUR_FREQ,
3802 "current radio freq lower digits - channel ID"),
3803 IPW2100_ORD(RTC_TIME, "current RTC time"),
3804 IPW2100_ORD(PORT_TYPE, "operating mode"),
3805 IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
3806 IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
3807 IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
3808 IPW2100_ORD(BASIC_RATES, "basic tx rates"),
3809 IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
3810 IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
3811 IPW2100_ORD(CAPABILITIES,
3812 "Management frame capability field"),
3813 IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
3814 IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
3815 IPW2100_ORD(RTS_THRESHOLD,
3816 "Min packet length for RTS handshaking"),
3817 IPW2100_ORD(INT_MODE, "International mode"),
3818 IPW2100_ORD(FRAGMENTATION_THRESHOLD,
3819 "protocol frag threshold"),
3820 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
3821 "EEPROM offset in SRAM"),
3822 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE,
3823 "EEPROM size in SRAM"),
3824 IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
3825 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS,
3826 "EEPROM IBSS 11b channel set"),
3827 IPW2100_ORD(MAC_VERSION, "MAC Version"),
3828 IPW2100_ORD(MAC_REVISION, "MAC Revision"),
3829 IPW2100_ORD(RADIO_VERSION, "Radio Version"),
3830 IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
3831 IPW2100_ORD(UCODE_VERSION, "Ucode Version"),};
3833 static ssize_t show_registers(struct device *d, struct device_attribute *attr,
3837 struct ipw2100_priv *priv = dev_get_drvdata(d);
3838 struct net_device *dev = priv->net_dev;
3842 out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
3844 for (i = 0; i < ARRAY_SIZE(hw_data); i++) {
3845 read_register(dev, hw_data[i].addr, &val);
3846 out += sprintf(out, "%30s [%08X] : %08X\n",
3847 hw_data[i].name, hw_data[i].addr, val);
3853 static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
3855 static ssize_t show_hardware(struct device *d, struct device_attribute *attr,
3858 struct ipw2100_priv *priv = dev_get_drvdata(d);
3859 struct net_device *dev = priv->net_dev;
3863 out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
3865 for (i = 0; i < ARRAY_SIZE(nic_data); i++) {
3870 switch (nic_data[i].size) {
3872 read_nic_byte(dev, nic_data[i].addr, &tmp8);
3873 out += sprintf(out, "%30s [%08X] : %02X\n",
3874 nic_data[i].name, nic_data[i].addr,
3878 read_nic_word(dev, nic_data[i].addr, &tmp16);
3879 out += sprintf(out, "%30s [%08X] : %04X\n",
3880 nic_data[i].name, nic_data[i].addr,
3884 read_nic_dword(dev, nic_data[i].addr, &tmp32);
3885 out += sprintf(out, "%30s [%08X] : %08X\n",
3886 nic_data[i].name, nic_data[i].addr,
3894 static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
3896 static ssize_t show_memory(struct device *d, struct device_attribute *attr,
3899 struct ipw2100_priv *priv = dev_get_drvdata(d);
3900 struct net_device *dev = priv->net_dev;
3901 static unsigned long loop = 0;
3907 if (loop >= 0x30000)
3910 /* sysfs provides us PAGE_SIZE buffer */
3911 while (len < PAGE_SIZE - 128 && loop < 0x30000) {
3913 if (priv->snapshot[0])
3914 for (i = 0; i < 4; i++)
3916 *(u32 *) SNAPSHOT_ADDR(loop + i * 4);
3918 for (i = 0; i < 4; i++)
3919 read_nic_dword(dev, loop + i * 4, &buffer[i]);
3922 len += sprintf(buf + len,
3927 ((u8 *) buffer)[0x0],
3928 ((u8 *) buffer)[0x1],
3929 ((u8 *) buffer)[0x2],
3930 ((u8 *) buffer)[0x3],
3931 ((u8 *) buffer)[0x4],
3932 ((u8 *) buffer)[0x5],
3933 ((u8 *) buffer)[0x6],
3934 ((u8 *) buffer)[0x7],
3935 ((u8 *) buffer)[0x8],
3936 ((u8 *) buffer)[0x9],
3937 ((u8 *) buffer)[0xa],
3938 ((u8 *) buffer)[0xb],
3939 ((u8 *) buffer)[0xc],
3940 ((u8 *) buffer)[0xd],
3941 ((u8 *) buffer)[0xe],
3942 ((u8 *) buffer)[0xf]);
3944 len += sprintf(buf + len, "%s\n",
3945 snprint_line(line, sizeof(line),
3946 (u8 *) buffer, 16, loop));
3953 static ssize_t store_memory(struct device *d, struct device_attribute *attr,
3954 const char *buf, size_t count)
3956 struct ipw2100_priv *priv = dev_get_drvdata(d);
3957 struct net_device *dev = priv->net_dev;
3958 const char *p = buf;
3960 (void)dev; /* kill unused-var warning for debug-only code */
3966 (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
3967 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3971 } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
3972 tolower(p[1]) == 'f')) {
3973 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3977 } else if (tolower(p[0]) == 'r') {
3978 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev->name);
3979 ipw2100_snapshot_free(priv);
3982 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3983 "reset = clear memory snapshot\n", dev->name);
3988 static DEVICE_ATTR(memory, S_IWUSR | S_IRUGO, show_memory, store_memory);
3990 static ssize_t show_ordinals(struct device *d, struct device_attribute *attr,
3993 struct ipw2100_priv *priv = dev_get_drvdata(d);
3997 static int loop = 0;
3999 if (priv->status & STATUS_RF_KILL_MASK)
4002 if (loop >= ARRAY_SIZE(ord_data))
4005 /* sysfs provides us PAGE_SIZE buffer */
4006 while (len < PAGE_SIZE - 128 && loop < ARRAY_SIZE(ord_data)) {
4007 val_len = sizeof(u32);
4009 if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
4011 len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
4012 ord_data[loop].index,
4013 ord_data[loop].desc);
4015 len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
4016 ord_data[loop].index, val,
4017 ord_data[loop].desc);
4024 static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
4026 static ssize_t show_stats(struct device *d, struct device_attribute *attr,
4029 struct ipw2100_priv *priv = dev_get_drvdata(d);
4032 out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4033 priv->interrupts, priv->tx_interrupts,
4034 priv->rx_interrupts, priv->inta_other);
4035 out += sprintf(out, "firmware resets: %d\n", priv->resets);
4036 out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
4037 #ifdef CONFIG_IPW2100_DEBUG
4038 out += sprintf(out, "packet mismatch image: %s\n",
4039 priv->snapshot[0] ? "YES" : "NO");
4045 static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
4047 static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
4051 if (mode == priv->ieee->iw_mode)
4054 err = ipw2100_disable_adapter(priv);
4056 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
4057 priv->net_dev->name, err);
4063 priv->net_dev->type = ARPHRD_ETHER;
4066 priv->net_dev->type = ARPHRD_ETHER;
4068 #ifdef CONFIG_IPW2100_MONITOR
4069 case IW_MODE_MONITOR:
4070 priv->last_mode = priv->ieee->iw_mode;
4071 priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
4073 #endif /* CONFIG_IPW2100_MONITOR */
4076 priv->ieee->iw_mode = mode;
4079 /* Indicate ipw2100_download_firmware download firmware
4080 * from disk instead of memory. */
4081 ipw2100_firmware.version = 0;
4084 printk(KERN_INFO "%s: Reseting on mode change.\n", priv->net_dev->name);
4085 priv->reset_backoff = 0;
4086 schedule_reset(priv);
4091 static ssize_t show_internals(struct device *d, struct device_attribute *attr,
4094 struct ipw2100_priv *priv = dev_get_drvdata(d);
4097 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4099 if (priv->status & STATUS_ASSOCIATED)
4100 len += sprintf(buf + len, "connected: %lu\n",
4101 get_seconds() - priv->connect_start);
4103 len += sprintf(buf + len, "not connected\n");
4105 DUMP_VAR(ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx], "p");
4106 DUMP_VAR(status, "08lx");
4107 DUMP_VAR(config, "08lx");
4108 DUMP_VAR(capability, "08lx");
4111 sprintf(buf + len, "last_rtc: %lu\n",
4112 (unsigned long)priv->last_rtc);
4114 DUMP_VAR(fatal_error, "d");
4115 DUMP_VAR(stop_hang_check, "d");
4116 DUMP_VAR(stop_rf_kill, "d");
4117 DUMP_VAR(messages_sent, "d");
4119 DUMP_VAR(tx_pend_stat.value, "d");
4120 DUMP_VAR(tx_pend_stat.hi, "d");
4122 DUMP_VAR(tx_free_stat.value, "d");
4123 DUMP_VAR(tx_free_stat.lo, "d");
4125 DUMP_VAR(msg_free_stat.value, "d");
4126 DUMP_VAR(msg_free_stat.lo, "d");
4128 DUMP_VAR(msg_pend_stat.value, "d");
4129 DUMP_VAR(msg_pend_stat.hi, "d");
4131 DUMP_VAR(fw_pend_stat.value, "d");
4132 DUMP_VAR(fw_pend_stat.hi, "d");
4134 DUMP_VAR(txq_stat.value, "d");
4135 DUMP_VAR(txq_stat.lo, "d");
4137 DUMP_VAR(ieee->scans, "d");
4138 DUMP_VAR(reset_backoff, "d");
4143 static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
4145 static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
4148 struct ipw2100_priv *priv = dev_get_drvdata(d);
4149 char essid[IW_ESSID_MAX_SIZE + 1];
4153 unsigned int length;
4156 if (priv->status & STATUS_RF_KILL_MASK)
4159 memset(essid, 0, sizeof(essid));
4160 memset(bssid, 0, sizeof(bssid));
4162 length = IW_ESSID_MAX_SIZE;
4163 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
4165 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4168 length = sizeof(bssid);
4169 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
4172 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4175 length = sizeof(u32);
4176 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
4178 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4181 out += sprintf(out, "ESSID: %s\n", essid);
4182 out += sprintf(out, "BSSID: %pM\n", bssid);
4183 out += sprintf(out, "Channel: %d\n", chan);
4188 static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
4190 #ifdef CONFIG_IPW2100_DEBUG
4191 static ssize_t show_debug_level(struct device_driver *d, char *buf)
4193 return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
4196 static ssize_t store_debug_level(struct device_driver *d,
4197 const char *buf, size_t count)
4199 char *p = (char *)buf;
4202 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4204 if (p[0] == 'x' || p[0] == 'X')
4206 val = simple_strtoul(p, &p, 16);
4208 val = simple_strtoul(p, &p, 10);
4210 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf);
4212 ipw2100_debug_level = val;
4214 return strnlen(buf, count);
4217 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
4219 #endif /* CONFIG_IPW2100_DEBUG */
4221 static ssize_t show_fatal_error(struct device *d,
4222 struct device_attribute *attr, char *buf)
4224 struct ipw2100_priv *priv = dev_get_drvdata(d);
4228 if (priv->fatal_error)
4229 out += sprintf(out, "0x%08X\n", priv->fatal_error);
4231 out += sprintf(out, "0\n");
4233 for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
4234 if (!priv->fatal_errors[(priv->fatal_index - i) %
4235 IPW2100_ERROR_QUEUE])
4238 out += sprintf(out, "%d. 0x%08X\n", i,
4239 priv->fatal_errors[(priv->fatal_index - i) %
4240 IPW2100_ERROR_QUEUE]);
4246 static ssize_t store_fatal_error(struct device *d,
4247 struct device_attribute *attr, const char *buf,
4250 struct ipw2100_priv *priv = dev_get_drvdata(d);
4251 schedule_reset(priv);
4255 static DEVICE_ATTR(fatal_error, S_IWUSR | S_IRUGO, show_fatal_error,
4258 static ssize_t show_scan_age(struct device *d, struct device_attribute *attr,
4261 struct ipw2100_priv *priv = dev_get_drvdata(d);
4262 return sprintf(buf, "%d\n", priv->ieee->scan_age);
4265 static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
4266 const char *buf, size_t count)
4268 struct ipw2100_priv *priv = dev_get_drvdata(d);
4269 struct net_device *dev = priv->net_dev;
4270 char buffer[] = "00000000";
4272 (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
4276 (void)dev; /* kill unused-var warning for debug-only code */
4278 IPW_DEBUG_INFO("enter\n");
4280 strncpy(buffer, buf, len);
4283 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4285 if (p[0] == 'x' || p[0] == 'X')
4287 val = simple_strtoul(p, &p, 16);
4289 val = simple_strtoul(p, &p, 10);
4291 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev->name);
4293 priv->ieee->scan_age = val;
4294 IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
4297 IPW_DEBUG_INFO("exit\n");
4301 static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
4303 static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
4306 /* 0 - RF kill not enabled
4307 1 - SW based RF kill active (sysfs)
4308 2 - HW based RF kill active
4309 3 - Both HW and SW baed RF kill active */
4310 struct ipw2100_priv *priv = dev_get_drvdata(d);
4311 int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
4312 (rf_kill_active(priv) ? 0x2 : 0x0);
4313 return sprintf(buf, "%i\n", val);
4316 static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
4318 if ((disable_radio ? 1 : 0) ==
4319 (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
4322 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4323 disable_radio ? "OFF" : "ON");
4325 mutex_lock(&priv->action_mutex);
4327 if (disable_radio) {
4328 priv->status |= STATUS_RF_KILL_SW;
4331 priv->status &= ~STATUS_RF_KILL_SW;
4332 if (rf_kill_active(priv)) {
4333 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4334 "disabled by HW switch\n");
4335 /* Make sure the RF_KILL check timer is running */
4336 priv->stop_rf_kill = 0;
4337 cancel_delayed_work(&priv->rf_kill);
4338 queue_delayed_work(priv->workqueue, &priv->rf_kill,
4339 round_jiffies_relative(HZ));
4341 schedule_reset(priv);
4344 mutex_unlock(&priv->action_mutex);
4348 static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
4349 const char *buf, size_t count)
4351 struct ipw2100_priv *priv = dev_get_drvdata(d);
4352 ipw_radio_kill_sw(priv, buf[0] == '1');
4356 static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
4358 static struct attribute *ipw2100_sysfs_entries[] = {
4359 &dev_attr_hardware.attr,
4360 &dev_attr_registers.attr,
4361 &dev_attr_ordinals.attr,
4363 &dev_attr_stats.attr,
4364 &dev_attr_internals.attr,
4365 &dev_attr_bssinfo.attr,
4366 &dev_attr_memory.attr,
4367 &dev_attr_scan_age.attr,
4368 &dev_attr_fatal_error.attr,
4369 &dev_attr_rf_kill.attr,
4371 &dev_attr_status.attr,
4372 &dev_attr_capability.attr,
4376 static struct attribute_group ipw2100_attribute_group = {
4377 .attrs = ipw2100_sysfs_entries,
4380 static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
4382 struct ipw2100_status_queue *q = &priv->status_queue;
4384 IPW_DEBUG_INFO("enter\n");
4386 q->size = entries * sizeof(struct ipw2100_status);
4388 (struct ipw2100_status *)pci_alloc_consistent(priv->pci_dev,
4391 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4395 memset(q->drv, 0, q->size);
4397 IPW_DEBUG_INFO("exit\n");
4402 static void status_queue_free(struct ipw2100_priv *priv)
4404 IPW_DEBUG_INFO("enter\n");
4406 if (priv->status_queue.drv) {
4407 pci_free_consistent(priv->pci_dev, priv->status_queue.size,
4408 priv->status_queue.drv,
4409 priv->status_queue.nic);
4410 priv->status_queue.drv = NULL;
4413 IPW_DEBUG_INFO("exit\n");
4416 static int bd_queue_allocate(struct ipw2100_priv *priv,
4417 struct ipw2100_bd_queue *q, int entries)
4419 IPW_DEBUG_INFO("enter\n");
4421 memset(q, 0, sizeof(struct ipw2100_bd_queue));
4423 q->entries = entries;
4424 q->size = entries * sizeof(struct ipw2100_bd);
4425 q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
4428 ("can't allocate shared memory for buffer descriptors\n");
4431 memset(q->drv, 0, q->size);
4433 IPW_DEBUG_INFO("exit\n");
4438 static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q)
4440 IPW_DEBUG_INFO("enter\n");
4446 pci_free_consistent(priv->pci_dev, q->size, q->drv, q->nic);
4450 IPW_DEBUG_INFO("exit\n");
4453 static void bd_queue_initialize(struct ipw2100_priv *priv,
4454 struct ipw2100_bd_queue *q, u32 base, u32 size,
4457 IPW_DEBUG_INFO("enter\n");
4459 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv,
4462 write_register(priv->net_dev, base, q->nic);
4463 write_register(priv->net_dev, size, q->entries);
4464 write_register(priv->net_dev, r, q->oldest);
4465 write_register(priv->net_dev, w, q->next);
4467 IPW_DEBUG_INFO("exit\n");
4470 static void ipw2100_kill_workqueue(struct ipw2100_priv *priv)
4472 if (priv->workqueue) {
4473 priv->stop_rf_kill = 1;
4474 priv->stop_hang_check = 1;
4475 cancel_delayed_work(&priv->reset_work);
4476 cancel_delayed_work(&priv->security_work);
4477 cancel_delayed_work(&priv->wx_event_work);
4478 cancel_delayed_work(&priv->hang_check);
4479 cancel_delayed_work(&priv->rf_kill);
4480 cancel_delayed_work(&priv->scan_event_later);
4481 destroy_workqueue(priv->workqueue);
4482 priv->workqueue = NULL;
4486 static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
4488 int i, j, err = -EINVAL;
4492 IPW_DEBUG_INFO("enter\n");
4494 err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
4496 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4497 priv->net_dev->name);
4502 (struct ipw2100_tx_packet *)kmalloc(TX_PENDED_QUEUE_LENGTH *
4506 if (!priv->tx_buffers) {
4507 printk(KERN_ERR DRV_NAME
4508 ": %s: alloc failed form tx buffers.\n",
4509 priv->net_dev->name);
4510 bd_queue_free(priv, &priv->tx_queue);
4514 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4515 v = pci_alloc_consistent(priv->pci_dev,
4516 sizeof(struct ipw2100_data_header),
4519 printk(KERN_ERR DRV_NAME
4520 ": %s: PCI alloc failed for tx " "buffers.\n",
4521 priv->net_dev->name);
4526 priv->tx_buffers[i].type = DATA;
4527 priv->tx_buffers[i].info.d_struct.data =
4528 (struct ipw2100_data_header *)v;
4529 priv->tx_buffers[i].info.d_struct.data_phys = p;
4530 priv->tx_buffers[i].info.d_struct.txb = NULL;
4533 if (i == TX_PENDED_QUEUE_LENGTH)
4536 for (j = 0; j < i; j++) {
4537 pci_free_consistent(priv->pci_dev,
4538 sizeof(struct ipw2100_data_header),
4539 priv->tx_buffers[j].info.d_struct.data,
4540 priv->tx_buffers[j].info.d_struct.
4544 kfree(priv->tx_buffers);
4545 priv->tx_buffers = NULL;
4550 static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
4554 IPW_DEBUG_INFO("enter\n");
4557 * reinitialize packet info lists
4559 INIT_LIST_HEAD(&priv->fw_pend_list);
4560 INIT_STAT(&priv->fw_pend_stat);
4563 * reinitialize lists
4565 INIT_LIST_HEAD(&priv->tx_pend_list);
4566 INIT_LIST_HEAD(&priv->tx_free_list);
4567 INIT_STAT(&priv->tx_pend_stat);
4568 INIT_STAT(&priv->tx_free_stat);
4570 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4571 /* We simply drop any SKBs that have been queued for
4573 if (priv->tx_buffers[i].info.d_struct.txb) {
4574 libipw_txb_free(priv->tx_buffers[i].info.d_struct.
4576 priv->tx_buffers[i].info.d_struct.txb = NULL;
4579 list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
4582 SET_STAT(&priv->tx_free_stat, i);
4584 priv->tx_queue.oldest = 0;
4585 priv->tx_queue.available = priv->tx_queue.entries;
4586 priv->tx_queue.next = 0;
4587 INIT_STAT(&priv->txq_stat);
4588 SET_STAT(&priv->txq_stat, priv->tx_queue.available);
4590 bd_queue_initialize(priv, &priv->tx_queue,
4591 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
4592 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
4593 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
4594 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
4596 IPW_DEBUG_INFO("exit\n");
4600 static void ipw2100_tx_free(struct ipw2100_priv *priv)
4604 IPW_DEBUG_INFO("enter\n");
4606 bd_queue_free(priv, &priv->tx_queue);
4608 if (!priv->tx_buffers)
4611 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4612 if (priv->tx_buffers[i].info.d_struct.txb) {
4613 libipw_txb_free(priv->tx_buffers[i].info.d_struct.
4615 priv->tx_buffers[i].info.d_struct.txb = NULL;
4617 if (priv->tx_buffers[i].info.d_struct.data)
4618 pci_free_consistent(priv->pci_dev,
4619 sizeof(struct ipw2100_data_header),
4620 priv->tx_buffers[i].info.d_struct.
4622 priv->tx_buffers[i].info.d_struct.
4626 kfree(priv->tx_buffers);
4627 priv->tx_buffers = NULL;
4629 IPW_DEBUG_INFO("exit\n");
4632 static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
4634 int i, j, err = -EINVAL;
4636 IPW_DEBUG_INFO("enter\n");
4638 err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
4640 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4644 err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
4646 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4647 bd_queue_free(priv, &priv->rx_queue);
4654 priv->rx_buffers = (struct ipw2100_rx_packet *)
4655 kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet),
4657 if (!priv->rx_buffers) {
4658 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4660 bd_queue_free(priv, &priv->rx_queue);
4662 status_queue_free(priv);
4667 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4668 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
4670 err = ipw2100_alloc_skb(priv, packet);
4671 if (unlikely(err)) {
4676 /* The BD holds the cache aligned address */
4677 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
4678 priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
4679 priv->status_queue.drv[i].status_fields = 0;
4682 if (i == RX_QUEUE_LENGTH)
4685 for (j = 0; j < i; j++) {
4686 pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
4687 sizeof(struct ipw2100_rx_packet),
4688 PCI_DMA_FROMDEVICE);
4689 dev_kfree_skb(priv->rx_buffers[j].skb);
4692 kfree(priv->rx_buffers);
4693 priv->rx_buffers = NULL;
4695 bd_queue_free(priv, &priv->rx_queue);
4697 status_queue_free(priv);
4702 static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
4704 IPW_DEBUG_INFO("enter\n");
4706 priv->rx_queue.oldest = 0;
4707 priv->rx_queue.available = priv->rx_queue.entries - 1;
4708 priv->rx_queue.next = priv->rx_queue.entries - 1;
4710 INIT_STAT(&priv->rxq_stat);
4711 SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
4713 bd_queue_initialize(priv, &priv->rx_queue,
4714 IPW_MEM_HOST_SHARED_RX_BD_BASE,
4715 IPW_MEM_HOST_SHARED_RX_BD_SIZE,
4716 IPW_MEM_HOST_SHARED_RX_READ_INDEX,
4717 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
4719 /* set up the status queue */
4720 write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
4721 priv->status_queue.nic);
4723 IPW_DEBUG_INFO("exit\n");
4726 static void ipw2100_rx_free(struct ipw2100_priv *priv)
4730 IPW_DEBUG_INFO("enter\n");
4732 bd_queue_free(priv, &priv->rx_queue);
4733 status_queue_free(priv);
4735 if (!priv->rx_buffers)
4738 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4739 if (priv->rx_buffers[i].rxp) {
4740 pci_unmap_single(priv->pci_dev,
4741 priv->rx_buffers[i].dma_addr,
4742 sizeof(struct ipw2100_rx),
4743 PCI_DMA_FROMDEVICE);
4744 dev_kfree_skb(priv->rx_buffers[i].skb);
4748 kfree(priv->rx_buffers);
4749 priv->rx_buffers = NULL;
4751 IPW_DEBUG_INFO("exit\n");
4754 static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
4756 u32 length = ETH_ALEN;
4761 err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, addr, &length);
4763 IPW_DEBUG_INFO("MAC address read failed\n");
4767 memcpy(priv->net_dev->dev_addr, addr, ETH_ALEN);
4768 IPW_DEBUG_INFO("card MAC is %pM\n", priv->net_dev->dev_addr);
4773 /********************************************************************
4777 ********************************************************************/
4779 static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
4781 struct host_command cmd = {
4782 .host_command = ADAPTER_ADDRESS,
4783 .host_command_sequence = 0,
4784 .host_command_length = ETH_ALEN
4788 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4790 IPW_DEBUG_INFO("enter\n");
4792 if (priv->config & CFG_CUSTOM_MAC) {
4793 memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN);
4794 memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
4796 memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
4799 err = ipw2100_hw_send_command(priv, &cmd);
4801 IPW_DEBUG_INFO("exit\n");
4805 static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
4808 struct host_command cmd = {
4809 .host_command = PORT_TYPE,
4810 .host_command_sequence = 0,
4811 .host_command_length = sizeof(u32)
4815 switch (port_type) {
4817 cmd.host_command_parameters[0] = IPW_BSS;
4820 cmd.host_command_parameters[0] = IPW_IBSS;
4824 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4825 port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
4828 err = ipw2100_disable_adapter(priv);
4830 printk(KERN_ERR DRV_NAME
4831 ": %s: Could not disable adapter %d\n",
4832 priv->net_dev->name, err);
4837 /* send cmd to firmware */
4838 err = ipw2100_hw_send_command(priv, &cmd);
4841 ipw2100_enable_adapter(priv);
4846 static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel,
4849 struct host_command cmd = {
4850 .host_command = CHANNEL,
4851 .host_command_sequence = 0,
4852 .host_command_length = sizeof(u32)
4856 cmd.host_command_parameters[0] = channel;
4858 IPW_DEBUG_HC("CHANNEL: %d\n", channel);
4860 /* If BSS then we don't support channel selection */
4861 if (priv->ieee->iw_mode == IW_MODE_INFRA)
4864 if ((channel != 0) &&
4865 ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
4869 err = ipw2100_disable_adapter(priv);
4874 err = ipw2100_hw_send_command(priv, &cmd);
4876 IPW_DEBUG_INFO("Failed to set channel to %d", channel);
4881 priv->config |= CFG_STATIC_CHANNEL;
4883 priv->config &= ~CFG_STATIC_CHANNEL;
4885 priv->channel = channel;
4888 err = ipw2100_enable_adapter(priv);
4896 static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
4898 struct host_command cmd = {
4899 .host_command = SYSTEM_CONFIG,
4900 .host_command_sequence = 0,
4901 .host_command_length = 12,
4903 u32 ibss_mask, len = sizeof(u32);
4906 /* Set system configuration */
4909 err = ipw2100_disable_adapter(priv);
4914 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
4915 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
4917 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
4918 IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE;
4920 if (!(priv->config & CFG_LONG_PREAMBLE))
4921 cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
4923 err = ipw2100_get_ordinal(priv,
4924 IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
4927 ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
4929 cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
4930 cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
4933 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4935 err = ipw2100_hw_send_command(priv, &cmd);
4939 /* If IPv6 is configured in the kernel then we don't want to filter out all
4940 * of the multicast packets as IPv6 needs some. */
4941 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4942 cmd.host_command = ADD_MULTICAST;
4943 cmd.host_command_sequence = 0;
4944 cmd.host_command_length = 0;
4946 ipw2100_hw_send_command(priv, &cmd);
4949 err = ipw2100_enable_adapter(priv);
4957 static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate,
4960 struct host_command cmd = {
4961 .host_command = BASIC_TX_RATES,
4962 .host_command_sequence = 0,
4963 .host_command_length = 4
4967 cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
4970 err = ipw2100_disable_adapter(priv);
4975 /* Set BASIC TX Rate first */
4976 ipw2100_hw_send_command(priv, &cmd);
4979 cmd.host_command = TX_RATES;
4980 ipw2100_hw_send_command(priv, &cmd);
4982 /* Set MSDU TX Rate */
4983 cmd.host_command = MSDU_TX_RATES;
4984 ipw2100_hw_send_command(priv, &cmd);
4987 err = ipw2100_enable_adapter(priv);
4992 priv->tx_rates = rate;
4997 static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level)
4999 struct host_command cmd = {
5000 .host_command = POWER_MODE,
5001 .host_command_sequence = 0,
5002 .host_command_length = 4
5006 cmd.host_command_parameters[0] = power_level;
5008 err = ipw2100_hw_send_command(priv, &cmd);
5012 if (power_level == IPW_POWER_MODE_CAM)
5013 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
5015 priv->power_mode = IPW_POWER_ENABLED | power_level;
5017 #ifdef IPW2100_TX_POWER
5018 if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) {
5019 /* Set beacon interval */
5020 cmd.host_command = TX_POWER_INDEX;
5021 cmd.host_command_parameters[0] = (u32) priv->adhoc_power;
5023 err = ipw2100_hw_send_command(priv, &cmd);
5032 static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
5034 struct host_command cmd = {
5035 .host_command = RTS_THRESHOLD,
5036 .host_command_sequence = 0,
5037 .host_command_length = 4
5041 if (threshold & RTS_DISABLED)
5042 cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
5044 cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
5046 err = ipw2100_hw_send_command(priv, &cmd);
5050 priv->rts_threshold = threshold;
5056 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
5057 u32 threshold, int batch_mode)
5059 struct host_command cmd = {
5060 .host_command = FRAG_THRESHOLD,
5061 .host_command_sequence = 0,
5062 .host_command_length = 4,
5063 .host_command_parameters[0] = 0,
5068 err = ipw2100_disable_adapter(priv);
5074 threshold = DEFAULT_FRAG_THRESHOLD;
5076 threshold = max(threshold, MIN_FRAG_THRESHOLD);
5077 threshold = min(threshold, MAX_FRAG_THRESHOLD);
5080 cmd.host_command_parameters[0] = threshold;
5082 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
5084 err = ipw2100_hw_send_command(priv, &cmd);
5087 ipw2100_enable_adapter(priv);
5090 priv->frag_threshold = threshold;
5096 static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
5098 struct host_command cmd = {
5099 .host_command = SHORT_RETRY_LIMIT,
5100 .host_command_sequence = 0,
5101 .host_command_length = 4
5105 cmd.host_command_parameters[0] = retry;
5107 err = ipw2100_hw_send_command(priv, &cmd);
5111 priv->short_retry_limit = retry;
5116 static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
5118 struct host_command cmd = {
5119 .host_command = LONG_RETRY_LIMIT,
5120 .host_command_sequence = 0,
5121 .host_command_length = 4
5125 cmd.host_command_parameters[0] = retry;
5127 err = ipw2100_hw_send_command(priv, &cmd);
5131 priv->long_retry_limit = retry;
5136 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid,
5139 struct host_command cmd = {
5140 .host_command = MANDATORY_BSSID,
5141 .host_command_sequence = 0,
5142 .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
5146 #ifdef CONFIG_IPW2100_DEBUG
5148 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid);
5150 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5152 /* if BSSID is empty then we disable mandatory bssid mode */
5154 memcpy(cmd.host_command_parameters, bssid, ETH_ALEN);
5157 err = ipw2100_disable_adapter(priv);
5162 err = ipw2100_hw_send_command(priv, &cmd);
5165 ipw2100_enable_adapter(priv);
5170 static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
5172 struct host_command cmd = {
5173 .host_command = DISASSOCIATION_BSSID,
5174 .host_command_sequence = 0,
5175 .host_command_length = ETH_ALEN
5180 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5183 /* The Firmware currently ignores the BSSID and just disassociates from
5184 * the currently associated AP -- but in the off chance that a future
5185 * firmware does use the BSSID provided here, we go ahead and try and
5186 * set it to the currently associated AP's BSSID */
5187 memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
5189 err = ipw2100_hw_send_command(priv, &cmd);
5194 static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
5195 struct ipw2100_wpa_assoc_frame *, int)
5196 __attribute__ ((unused));
5198 static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
5199 struct ipw2100_wpa_assoc_frame *wpa_frame,
5202 struct host_command cmd = {
5203 .host_command = SET_WPA_IE,
5204 .host_command_sequence = 0,
5205 .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
5209 IPW_DEBUG_HC("SET_WPA_IE\n");
5212 err = ipw2100_disable_adapter(priv);
5217 memcpy(cmd.host_command_parameters, wpa_frame,
5218 sizeof(struct ipw2100_wpa_assoc_frame));
5220 err = ipw2100_hw_send_command(priv, &cmd);
5223 if (ipw2100_enable_adapter(priv))
5230 struct security_info_params {
5231 u32 allowed_ciphers;
5234 u8 replay_counters_number;
5235 u8 unicast_using_group;
5236 } __attribute__ ((packed));
5238 static int ipw2100_set_security_information(struct ipw2100_priv *priv,
5241 int unicast_using_group,
5244 struct host_command cmd = {
5245 .host_command = SET_SECURITY_INFORMATION,
5246 .host_command_sequence = 0,
5247 .host_command_length = sizeof(struct security_info_params)
5249 struct security_info_params *security =
5250 (struct security_info_params *)&cmd.host_command_parameters;
5252 memset(security, 0, sizeof(*security));
5254 /* If shared key AP authentication is turned on, then we need to
5255 * configure the firmware to try and use it.
5257 * Actual data encryption/decryption is handled by the host. */
5258 security->auth_mode = auth_mode;
5259 security->unicast_using_group = unicast_using_group;
5261 switch (security_level) {
5264 security->allowed_ciphers = IPW_NONE_CIPHER;
5267 security->allowed_ciphers = IPW_WEP40_CIPHER |
5271 security->allowed_ciphers = IPW_WEP40_CIPHER |
5272 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
5274 case SEC_LEVEL_2_CKIP:
5275 security->allowed_ciphers = IPW_WEP40_CIPHER |
5276 IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
5279 security->allowed_ciphers = IPW_WEP40_CIPHER |
5280 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
5285 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5286 security->auth_mode, security->allowed_ciphers, security_level);
5288 security->replay_counters_number = 0;
5291 err = ipw2100_disable_adapter(priv);
5296 err = ipw2100_hw_send_command(priv, &cmd);
5299 ipw2100_enable_adapter(priv);
5304 static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power)
5306 struct host_command cmd = {
5307 .host_command = TX_POWER_INDEX,
5308 .host_command_sequence = 0,
5309 .host_command_length = 4
5314 if (tx_power != IPW_TX_POWER_DEFAULT)
5315 tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 /
5316 (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
5318 cmd.host_command_parameters[0] = tmp;
5320 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
5321 err = ipw2100_hw_send_command(priv, &cmd);
5323 priv->tx_power = tx_power;
5328 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
5329 u32 interval, int batch_mode)
5331 struct host_command cmd = {
5332 .host_command = BEACON_INTERVAL,
5333 .host_command_sequence = 0,
5334 .host_command_length = 4
5338 cmd.host_command_parameters[0] = interval;
5340 IPW_DEBUG_INFO("enter\n");
5342 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5344 err = ipw2100_disable_adapter(priv);
5349 ipw2100_hw_send_command(priv, &cmd);
5352 err = ipw2100_enable_adapter(priv);
5358 IPW_DEBUG_INFO("exit\n");
5363 static void ipw2100_queues_initialize(struct ipw2100_priv *priv)
5365 ipw2100_tx_initialize(priv);
5366 ipw2100_rx_initialize(priv);
5367 ipw2100_msg_initialize(priv);
5370 static void ipw2100_queues_free(struct ipw2100_priv *priv)
5372 ipw2100_tx_free(priv);
5373 ipw2100_rx_free(priv);
5374 ipw2100_msg_free(priv);
5377 static int ipw2100_queues_allocate(struct ipw2100_priv *priv)
5379 if (ipw2100_tx_allocate(priv) ||
5380 ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv))
5386 ipw2100_tx_free(priv);
5387 ipw2100_rx_free(priv);
5388 ipw2100_msg_free(priv);
5392 #define IPW_PRIVACY_CAPABLE 0x0008
5394 static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
5397 struct host_command cmd = {
5398 .host_command = WEP_FLAGS,
5399 .host_command_sequence = 0,
5400 .host_command_length = 4
5404 cmd.host_command_parameters[0] = flags;
5406 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
5409 err = ipw2100_disable_adapter(priv);
5411 printk(KERN_ERR DRV_NAME
5412 ": %s: Could not disable adapter %d\n",
5413 priv->net_dev->name, err);
5418 /* send cmd to firmware */
5419 err = ipw2100_hw_send_command(priv, &cmd);
5422 ipw2100_enable_adapter(priv);
5427 struct ipw2100_wep_key {
5433 /* Macros to ease up priting WEP keys */
5434 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5435 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5436 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5437 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5442 * @priv: struct to work on
5443 * @idx: index of the key we want to set
5444 * @key: ptr to the key data to set
5445 * @len: length of the buffer at @key
5446 * @batch_mode: FIXME perform the operation in batch mode, not
5447 * disabling the device.
5449 * @returns 0 if OK, < 0 errno code on error.
5451 * Fill out a command structure with the new wep key, length an
5452 * index and send it down the wire.
5454 static int ipw2100_set_key(struct ipw2100_priv *priv,
5455 int idx, char *key, int len, int batch_mode)
5457 int keylen = len ? (len <= 5 ? 5 : 13) : 0;
5458 struct host_command cmd = {
5459 .host_command = WEP_KEY_INFO,
5460 .host_command_sequence = 0,
5461 .host_command_length = sizeof(struct ipw2100_wep_key),
5463 struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters;
5466 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5469 /* NOTE: We don't check cached values in case the firmware was reset
5470 * or some other problem is occurring. If the user is setting the key,
5471 * then we push the change */
5474 wep_key->len = keylen;
5477 memcpy(wep_key->key, key, len);
5478 memset(wep_key->key + len, 0, keylen - len);
5481 /* Will be optimized out on debug not being configured in */
5483 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5484 priv->net_dev->name, wep_key->idx);
5485 else if (keylen == 5)
5486 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
5487 priv->net_dev->name, wep_key->idx, wep_key->len,
5488 WEP_STR_64(wep_key->key));
5490 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5492 priv->net_dev->name, wep_key->idx, wep_key->len,
5493 WEP_STR_128(wep_key->key));
5496 err = ipw2100_disable_adapter(priv);
5497 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5499 printk(KERN_ERR DRV_NAME
5500 ": %s: Could not disable adapter %d\n",
5501 priv->net_dev->name, err);
5506 /* send cmd to firmware */
5507 err = ipw2100_hw_send_command(priv, &cmd);
5510 int err2 = ipw2100_enable_adapter(priv);
5517 static int ipw2100_set_key_index(struct ipw2100_priv *priv,
5518 int idx, int batch_mode)
5520 struct host_command cmd = {
5521 .host_command = WEP_KEY_INDEX,
5522 .host_command_sequence = 0,
5523 .host_command_length = 4,
5524 .host_command_parameters = {idx},
5528 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
5530 if (idx < 0 || idx > 3)
5534 err = ipw2100_disable_adapter(priv);
5536 printk(KERN_ERR DRV_NAME
5537 ": %s: Could not disable adapter %d\n",
5538 priv->net_dev->name, err);
5543 /* send cmd to firmware */
5544 err = ipw2100_hw_send_command(priv, &cmd);
5547 ipw2100_enable_adapter(priv);
5552 static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode)
5554 int i, err, auth_mode, sec_level, use_group;
5556 if (!(priv->status & STATUS_RUNNING))
5560 err = ipw2100_disable_adapter(priv);
5565 if (!priv->ieee->sec.enabled) {
5567 ipw2100_set_security_information(priv, IPW_AUTH_OPEN,
5570 auth_mode = IPW_AUTH_OPEN;
5571 if (priv->ieee->sec.flags & SEC_AUTH_MODE) {
5572 if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY)
5573 auth_mode = IPW_AUTH_SHARED;
5574 else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP)
5575 auth_mode = IPW_AUTH_LEAP_CISCO_ID;
5578 sec_level = SEC_LEVEL_0;
5579 if (priv->ieee->sec.flags & SEC_LEVEL)
5580 sec_level = priv->ieee->sec.level;
5583 if (priv->ieee->sec.flags & SEC_UNICAST_GROUP)
5584 use_group = priv->ieee->sec.unicast_uses_group;
5587 ipw2100_set_security_information(priv, auth_mode, sec_level,
5594 if (priv->ieee->sec.enabled) {
5595 for (i = 0; i < 4; i++) {
5596 if (!(priv->ieee->sec.flags & (1 << i))) {
5597 memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN);
5598 priv->ieee->sec.key_sizes[i] = 0;
5600 err = ipw2100_set_key(priv, i,
5601 priv->ieee->sec.keys[i],
5609 ipw2100_set_key_index(priv, priv->ieee->crypt_info.tx_keyidx, 1);
5612 /* Always enable privacy so the Host can filter WEP packets if
5613 * encrypted data is sent up */
5615 ipw2100_set_wep_flags(priv,
5617 enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
5621 priv->status &= ~STATUS_SECURITY_UPDATED;
5625 ipw2100_enable_adapter(priv);
5630 static void ipw2100_security_work(struct work_struct *work)
5632 struct ipw2100_priv *priv =
5633 container_of(work, struct ipw2100_priv, security_work.work);
5635 /* If we happen to have reconnected before we get a chance to
5636 * process this, then update the security settings--which causes
5637 * a disassociation to occur */
5638 if (!(priv->status & STATUS_ASSOCIATED) &&
5639 priv->status & STATUS_SECURITY_UPDATED)
5640 ipw2100_configure_security(priv, 0);
5643 static void shim__set_security(struct net_device *dev,
5644 struct libipw_security *sec)
5646 struct ipw2100_priv *priv = libipw_priv(dev);
5647 int i, force_update = 0;
5649 mutex_lock(&priv->action_mutex);
5650 if (!(priv->status & STATUS_INITIALIZED))
5653 for (i = 0; i < 4; i++) {
5654 if (sec->flags & (1 << i)) {
5655 priv->ieee->sec.key_sizes[i] = sec->key_sizes[i];
5656 if (sec->key_sizes[i] == 0)
5657 priv->ieee->sec.flags &= ~(1 << i);
5659 memcpy(priv->ieee->sec.keys[i], sec->keys[i],
5661 if (sec->level == SEC_LEVEL_1) {
5662 priv->ieee->sec.flags |= (1 << i);
5663 priv->status |= STATUS_SECURITY_UPDATED;
5665 priv->ieee->sec.flags &= ~(1 << i);
5669 if ((sec->flags & SEC_ACTIVE_KEY) &&
5670 priv->ieee->sec.active_key != sec->active_key) {
5671 if (sec->active_key <= 3) {
5672 priv->ieee->sec.active_key = sec->active_key;
5673 priv->ieee->sec.flags |= SEC_ACTIVE_KEY;
5675 priv->ieee->sec.flags &= ~SEC_ACTIVE_KEY;
5677 priv->status |= STATUS_SECURITY_UPDATED;
5680 if ((sec->flags & SEC_AUTH_MODE) &&
5681 (priv->ieee->sec.auth_mode != sec->auth_mode)) {
5682 priv->ieee->sec.auth_mode = sec->auth_mode;
5683 priv->ieee->sec.flags |= SEC_AUTH_MODE;
5684 priv->status |= STATUS_SECURITY_UPDATED;
5687 if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) {
5688 priv->ieee->sec.flags |= SEC_ENABLED;
5689 priv->ieee->sec.enabled = sec->enabled;
5690 priv->status |= STATUS_SECURITY_UPDATED;
5694 if (sec->flags & SEC_ENCRYPT)
5695 priv->ieee->sec.encrypt = sec->encrypt;
5697 if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) {
5698 priv->ieee->sec.level = sec->level;
5699 priv->ieee->sec.flags |= SEC_LEVEL;
5700 priv->status |= STATUS_SECURITY_UPDATED;
5703 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5704 priv->ieee->sec.flags & (1 << 8) ? '1' : '0',
5705 priv->ieee->sec.flags & (1 << 7) ? '1' : '0',
5706 priv->ieee->sec.flags & (1 << 6) ? '1' : '0',
5707 priv->ieee->sec.flags & (1 << 5) ? '1' : '0',
5708 priv->ieee->sec.flags & (1 << 4) ? '1' : '0',
5709 priv->ieee->sec.flags & (1 << 3) ? '1' : '0',
5710 priv->ieee->sec.flags & (1 << 2) ? '1' : '0',
5711 priv->ieee->sec.flags & (1 << 1) ? '1' : '0',
5712 priv->ieee->sec.flags & (1 << 0) ? '1' : '0');
5714 /* As a temporary work around to enable WPA until we figure out why
5715 * wpa_supplicant toggles the security capability of the driver, which
5716 * forces a disassocation with force_update...
5718 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5719 if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
5720 ipw2100_configure_security(priv, 0);
5722 mutex_unlock(&priv->action_mutex);
5725 static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
5731 IPW_DEBUG_INFO("enter\n");
5733 err = ipw2100_disable_adapter(priv);
5736 #ifdef CONFIG_IPW2100_MONITOR
5737 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
5738 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5742 IPW_DEBUG_INFO("exit\n");
5746 #endif /* CONFIG_IPW2100_MONITOR */
5748 err = ipw2100_read_mac_address(priv);
5752 err = ipw2100_set_mac_address(priv, batch_mode);
5756 err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
5760 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5761 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5766 err = ipw2100_system_config(priv, batch_mode);
5770 err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
5774 /* Default to power mode OFF */
5775 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
5779 err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
5783 if (priv->config & CFG_STATIC_BSSID)
5784 bssid = priv->bssid;
5787 err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
5791 if (priv->config & CFG_STATIC_ESSID)
5792 err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
5795 err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
5799 err = ipw2100_configure_security(priv, batch_mode);
5803 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5805 ipw2100_set_ibss_beacon_interval(priv,
5806 priv->beacon_interval,
5811 err = ipw2100_set_tx_power(priv, priv->tx_power);
5817 err = ipw2100_set_fragmentation_threshold(
5818 priv, priv->frag_threshold, batch_mode);
5823 IPW_DEBUG_INFO("exit\n");
5828 /*************************************************************************
5830 * EXTERNALLY CALLED METHODS
5832 *************************************************************************/
5834 /* This method is called by the network layer -- not to be confused with
5835 * ipw2100_set_mac_address() declared above called by this driver (and this
5836 * method as well) to talk to the firmware */
5837 static int ipw2100_set_address(struct net_device *dev, void *p)
5839 struct ipw2100_priv *priv = libipw_priv(dev);
5840 struct sockaddr *addr = p;
5843 if (!is_valid_ether_addr(addr->sa_data))
5844 return -EADDRNOTAVAIL;
5846 mutex_lock(&priv->action_mutex);
5848 priv->config |= CFG_CUSTOM_MAC;
5849 memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
5851 err = ipw2100_set_mac_address(priv, 0);
5855 priv->reset_backoff = 0;
5856 mutex_unlock(&priv->action_mutex);
5857 ipw2100_reset_adapter(&priv->reset_work.work);
5861 mutex_unlock(&priv->action_mutex);
5865 static int ipw2100_open(struct net_device *dev)
5867 struct ipw2100_priv *priv = libipw_priv(dev);
5868 unsigned long flags;
5869 IPW_DEBUG_INFO("dev->open\n");
5871 spin_lock_irqsave(&priv->low_lock, flags);
5872 if (priv->status & STATUS_ASSOCIATED) {
5873 netif_carrier_on(dev);
5874 netif_start_queue(dev);
5876 spin_unlock_irqrestore(&priv->low_lock, flags);
5881 static int ipw2100_close(struct net_device *dev)
5883 struct ipw2100_priv *priv = libipw_priv(dev);
5884 unsigned long flags;
5885 struct list_head *element;
5886 struct ipw2100_tx_packet *packet;
5888 IPW_DEBUG_INFO("enter\n");
5890 spin_lock_irqsave(&priv->low_lock, flags);
5892 if (priv->status & STATUS_ASSOCIATED)
5893 netif_carrier_off(dev);
5894 netif_stop_queue(dev);
5896 /* Flush the TX queue ... */
5897 while (!list_empty(&priv->tx_pend_list)) {
5898 element = priv->tx_pend_list.next;
5899 packet = list_entry(element, struct ipw2100_tx_packet, list);
5902 DEC_STAT(&priv->tx_pend_stat);
5904 libipw_txb_free(packet->info.d_struct.txb);
5905 packet->info.d_struct.txb = NULL;
5907 list_add_tail(element, &priv->tx_free_list);
5908 INC_STAT(&priv->tx_free_stat);
5910 spin_unlock_irqrestore(&priv->low_lock, flags);
5912 IPW_DEBUG_INFO("exit\n");
5918 * TODO: Fix this function... its just wrong
5920 static void ipw2100_tx_timeout(struct net_device *dev)
5922 struct ipw2100_priv *priv = libipw_priv(dev);
5924 dev->stats.tx_errors++;
5926 #ifdef CONFIG_IPW2100_MONITOR
5927 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
5931 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5933 schedule_reset(priv);
5936 static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value)
5938 /* This is called when wpa_supplicant loads and closes the driver
5940 priv->ieee->wpa_enabled = value;
5944 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value)
5947 struct libipw_device *ieee = priv->ieee;
5948 struct libipw_security sec = {
5949 .flags = SEC_AUTH_MODE,
5953 if (value & IW_AUTH_ALG_SHARED_KEY) {
5954 sec.auth_mode = WLAN_AUTH_SHARED_KEY;
5956 } else if (value & IW_AUTH_ALG_OPEN_SYSTEM) {
5957 sec.auth_mode = WLAN_AUTH_OPEN;
5959 } else if (value & IW_AUTH_ALG_LEAP) {
5960 sec.auth_mode = WLAN_AUTH_LEAP;
5965 if (ieee->set_security)
5966 ieee->set_security(ieee->dev, &sec);
5973 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
5974 char *wpa_ie, int wpa_ie_len)
5977 struct ipw2100_wpa_assoc_frame frame;
5979 frame.fixed_ie_mask = 0;
5982 memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
5983 frame.var_ie_len = wpa_ie_len;
5985 /* make sure WPA is enabled */
5986 ipw2100_wpa_enable(priv, 1);
5987 ipw2100_set_wpa_ie(priv, &frame, 0);
5990 static void ipw_ethtool_get_drvinfo(struct net_device *dev,
5991 struct ethtool_drvinfo *info)
5993 struct ipw2100_priv *priv = libipw_priv(dev);
5994 char fw_ver[64], ucode_ver[64];
5996 strcpy(info->driver, DRV_NAME);
5997 strcpy(info->version, DRV_VERSION);
5999 ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
6000 ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
6002 snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
6003 fw_ver, priv->eeprom_version, ucode_ver);
6005 strcpy(info->bus_info, pci_name(priv->pci_dev));
6008 static u32 ipw2100_ethtool_get_link(struct net_device *dev)
6010 struct ipw2100_priv *priv = libipw_priv(dev);
6011 return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
6014 static const struct ethtool_ops ipw2100_ethtool_ops = {
6015 .get_link = ipw2100_ethtool_get_link,
6016 .get_drvinfo = ipw_ethtool_get_drvinfo,
6019 static void ipw2100_hang_check(struct work_struct *work)
6021 struct ipw2100_priv *priv =
6022 container_of(work, struct ipw2100_priv, hang_check.work);
6023 unsigned long flags;
6024 u32 rtc = 0xa5a5a5a5;
6025 u32 len = sizeof(rtc);
6028 spin_lock_irqsave(&priv->low_lock, flags);
6030 if (priv->fatal_error != 0) {
6031 /* If fatal_error is set then we need to restart */
6032 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6033 priv->net_dev->name);
6036 } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
6037 (rtc == priv->last_rtc)) {
6038 /* Check if firmware is hung */
6039 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6040 priv->net_dev->name);
6047 priv->stop_hang_check = 1;
6050 /* Restart the NIC */
6051 schedule_reset(priv);