[PATCH] irq-flags: PPC: Use the new IRQF_ constants
[linux-3.10.git] / arch / ppc / syslib / open_pic.c
1 /*
2  *  Copyright (C) 1997 Geert Uytterhoeven
3  *
4  *  This file is subject to the terms and conditions of the GNU General Public
5  *  License.  See the file COPYING in the main directory of this archive
6  *  for more details.
7  */
8
9 #include <linux/types.h>
10 #include <linux/kernel.h>
11 #include <linux/sched.h>
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/sysdev.h>
15 #include <linux/errno.h>
16 #include <asm/ptrace.h>
17 #include <asm/signal.h>
18 #include <asm/io.h>
19 #include <asm/irq.h>
20 #include <asm/sections.h>
21 #include <asm/open_pic.h>
22 #include <asm/i8259.h>
23 #include <asm/machdep.h>
24
25 #include "open_pic_defs.h"
26
27 #if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx)
28 #define OPENPIC_BIG_ENDIAN
29 #endif
30
31 void __iomem *OpenPIC_Addr;
32 static volatile struct OpenPIC __iomem *OpenPIC = NULL;
33
34 /*
35  * We define OpenPIC_InitSenses table thusly:
36  * bit 0x1: sense, 0 for edge and 1 for level.
37  * bit 0x2: polarity, 0 for negative, 1 for positive.
38  */
39 u_int OpenPIC_NumInitSenses __initdata = 0;
40 u_char *OpenPIC_InitSenses __initdata = NULL;
41 extern int use_of_interrupt_tree;
42
43 static u_int NumProcessors;
44 static u_int NumSources;
45 static int open_pic_irq_offset;
46 static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
47 static int openpic_cascade_irq = -1;
48 static int (*openpic_cascade_fn)(struct pt_regs *);
49
50 /* Global Operations */
51 static void openpic_disable_8259_pass_through(void);
52 static void openpic_set_spurious(u_int vector);
53
54 #ifdef CONFIG_SMP
55 /* Interprocessor Interrupts */
56 static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
57 static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *);
58 #endif
59
60 /* Timer Interrupts */
61 static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
62 static void openpic_maptimer(u_int timer, cpumask_t cpumask);
63
64 /* Interrupt Sources */
65 static void openpic_enable_irq(u_int irq);
66 static void openpic_disable_irq(u_int irq);
67 static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
68                             int is_level);
69 static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
70
71 /*
72  * These functions are not used but the code is kept here
73  * for completeness and future reference.
74  */
75 #ifdef notused
76 static void openpic_enable_8259_pass_through(void);
77 static u_int openpic_get_spurious(void);
78 static void openpic_set_sense(u_int irq, int sense);
79 #endif /* notused */
80
81 /*
82  * Description of the openpic for the higher-level irq code
83  */
84 static void openpic_end_irq(unsigned int irq_nr);
85 static void openpic_ack_irq(unsigned int irq_nr);
86 static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
87
88 struct hw_interrupt_type open_pic = {
89         .typename       = " OpenPIC  ",
90         .enable         = openpic_enable_irq,
91         .disable        = openpic_disable_irq,
92         .ack            = openpic_ack_irq,
93         .end            = openpic_end_irq,
94         .set_affinity   = openpic_set_affinity,
95 };
96
97 #ifdef CONFIG_SMP
98 static void openpic_end_ipi(unsigned int irq_nr);
99 static void openpic_ack_ipi(unsigned int irq_nr);
100 static void openpic_enable_ipi(unsigned int irq_nr);
101 static void openpic_disable_ipi(unsigned int irq_nr);
102
103 struct hw_interrupt_type open_pic_ipi = {
104         .typename       = " OpenPIC  ",
105         .enable         = openpic_enable_ipi,
106         .disable        = openpic_disable_ipi,
107         .ack            = openpic_ack_ipi,
108         .end            = openpic_end_ipi,
109 };
110 #endif /* CONFIG_SMP */
111
112 /*
113  *  Accesses to the current processor's openpic registers
114  */
115 #ifdef CONFIG_SMP
116 #define THIS_CPU                Processor[cpu]
117 #define DECL_THIS_CPU           int cpu = smp_hw_index[smp_processor_id()]
118 #define CHECK_THIS_CPU          check_arg_cpu(cpu)
119 #else
120 #define THIS_CPU                Processor[0]
121 #define DECL_THIS_CPU
122 #define CHECK_THIS_CPU
123 #endif /* CONFIG_SMP */
124
125 #if 1
126 #define check_arg_ipi(ipi) \
127     if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
128         printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
129 #define check_arg_timer(timer) \
130     if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
131         printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
132 #define check_arg_vec(vec) \
133     if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
134         printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
135 #define check_arg_pri(pri) \
136     if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
137         printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
138 /*
139  * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
140  * data has probably been corrupted and we're going to panic or deadlock later
141  * anyway --Troy
142  */
143 #define check_arg_irq(irq) \
144     if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
145         || ISR[irq - open_pic_irq_offset] == 0) { \
146       printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
147       dump_stack(); }
148 #define check_arg_cpu(cpu) \
149     if (cpu < 0 || cpu >= NumProcessors){ \
150         printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
151         dump_stack(); }
152 #else
153 #define check_arg_ipi(ipi)      do {} while (0)
154 #define check_arg_timer(timer)  do {} while (0)
155 #define check_arg_vec(vec)      do {} while (0)
156 #define check_arg_pri(pri)      do {} while (0)
157 #define check_arg_irq(irq)      do {} while (0)
158 #define check_arg_cpu(cpu)      do {} while (0)
159 #endif
160
161 u_int openpic_read(volatile u_int __iomem *addr)
162 {
163         u_int val;
164
165 #ifdef OPENPIC_BIG_ENDIAN
166         val = in_be32(addr);
167 #else
168         val = in_le32(addr);
169 #endif
170         return val;
171 }
172
173 static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
174 {
175 #ifdef OPENPIC_BIG_ENDIAN
176         out_be32(addr, val);
177 #else
178         out_le32(addr, val);
179 #endif
180 }
181
182 static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
183 {
184         u_int val = openpic_read(addr);
185         return val & mask;
186 }
187
188 inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
189                                u_int field)
190 {
191         u_int val = openpic_read(addr);
192         openpic_write(addr, (val & ~mask) | (field & mask));
193 }
194
195 static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
196 {
197         openpic_writefield(addr, mask, 0);
198 }
199
200 static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
201 {
202         openpic_writefield(addr, mask, mask);
203 }
204
205 static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
206                                     u_int field)
207 {
208         openpic_setfield(addr, OPENPIC_MASK);
209         while (openpic_read(addr) & OPENPIC_ACTIVITY);
210         openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
211 }
212
213 #ifdef CONFIG_SMP
214 /* yes this is right ... bug, feature, you decide! -- tgall */
215 u_int openpic_read_IPI(volatile u_int __iomem * addr)
216 {
217          u_int val = 0;
218 #if defined(OPENPIC_BIG_ENDIAN)
219         val = in_be32(addr);
220 #else
221         val = in_le32(addr);
222 #endif
223         return val;
224 }
225
226 /* because of the power3 be / le above, this is needed */
227 inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
228 {
229         u_int  val = openpic_read_IPI(addr);
230         openpic_write(addr, (val & ~mask) | (field & mask));
231 }
232
233 static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
234 {
235         openpic_writefield_IPI(addr, mask, 0);
236 }
237
238 static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
239 {
240         openpic_writefield_IPI(addr, mask, mask);
241 }
242
243 static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
244 {
245         openpic_setfield_IPI(addr, OPENPIC_MASK);
246
247         /* wait until it's not in use */
248         /* BenH: Is this code really enough ? I would rather check the result
249          *       and eventually retry ...
250          */
251         while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
252
253         openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
254 }
255 #endif /* CONFIG_SMP */
256
257 #ifdef CONFIG_EPIC_SERIAL_MODE
258 /* On platforms that may use EPIC serial mode, the default is enabled. */
259 int epic_serial_mode = 1;
260
261 static void __init openpic_eicr_set_clk(u_int clkval)
262 {
263         openpic_writefield(&OpenPIC->Global.Global_Configuration1,
264                         OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
265 }
266
267 static void __init openpic_enable_sie(void)
268 {
269         openpic_setfield(&OpenPIC->Global.Global_Configuration1,
270                         OPENPIC_EICR_SIE);
271 }
272 #endif
273
274 #if defined(CONFIG_EPIC_SERIAL_MODE)
275 static void openpic_reset(void)
276 {
277         openpic_setfield(&OpenPIC->Global.Global_Configuration0,
278                          OPENPIC_CONFIG_RESET);
279         while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
280                                  OPENPIC_CONFIG_RESET))
281                 mb();
282 }
283 #endif
284
285 void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
286 {
287         volatile OpenPIC_Source __iomem *src = first_ISR;
288         int i, last_irq;
289
290         last_irq = first_irq + num_irqs;
291         if (last_irq > NumSources)
292                 NumSources = last_irq;
293         if (src == 0)
294                 src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
295         for (i = first_irq; i < last_irq; ++i, ++src)
296                 ISR[i] = src;
297 }
298
299 /*
300  * The `offset' parameter defines where the interrupts handled by the
301  * OpenPIC start in the space of interrupt numbers that the kernel knows
302  * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
303  * kernel's interrupt numbering scheme.
304  * We assume there is only one OpenPIC.
305  */
306 void __init openpic_init(int offset)
307 {
308         u_int t, i;
309         u_int timerfreq;
310         const char *version;
311
312         if (!OpenPIC_Addr) {
313                 printk("No OpenPIC found !\n");
314                 return;
315         }
316         OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
317
318 #ifdef CONFIG_EPIC_SERIAL_MODE
319         /* Have to start from ground zero.
320         */
321         openpic_reset();
322 #endif
323
324         if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
325
326         t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
327         switch (t & OPENPIC_FEATURE_VERSION_MASK) {
328         case 1:
329                 version = "1.0";
330                 break;
331         case 2:
332                 version = "1.2";
333                 break;
334         case 3:
335                 version = "1.3";
336                 break;
337         default:
338                 version = "?";
339                 break;
340         }
341         NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
342                          OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
343         if (NumSources == 0)
344                 openpic_set_sources(0,
345                                     ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
346                                      OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
347                                     NULL);
348         printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
349                version, NumProcessors, NumSources, OpenPIC);
350         timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
351         if (timerfreq)
352                 printk("OpenPIC timer frequency is %d.%06d MHz\n",
353                        timerfreq / 1000000, timerfreq % 1000000);
354
355         open_pic_irq_offset = offset;
356
357         /* Initialize timer interrupts */
358         if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
359         for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
360                 /* Disabled, Priority 0 */
361                 openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
362                 /* No processor */
363                 openpic_maptimer(i, CPU_MASK_NONE);
364         }
365
366 #ifdef CONFIG_SMP
367         /* Initialize IPI interrupts */
368         if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
369         for (i = 0; i < OPENPIC_NUM_IPI; i++) {
370                 /* Disabled, increased priorities 10..13 */
371                 openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
372                                 OPENPIC_VEC_IPI+i+offset);
373                 /* IPIs are per-CPU */
374                 irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
375                 irq_desc[OPENPIC_VEC_IPI+i+offset].chip = &open_pic_ipi;
376         }
377 #endif
378
379         /* Initialize external interrupts */
380         if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
381
382         openpic_set_priority(0xf);
383
384         /* Init all external sources, including possibly the cascade. */
385         for (i = 0; i < NumSources; i++) {
386                 int sense;
387
388                 if (ISR[i] == 0)
389                         continue;
390
391                 /* the bootloader may have left it enabled (bad !) */
392                 openpic_disable_irq(i+offset);
393
394                 sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
395                                 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
396
397                 if (sense & IRQ_SENSE_MASK)
398                         irq_desc[i+offset].status = IRQ_LEVEL;
399
400                 /* Enabled, Default priority */
401                 openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
402                                 (sense & IRQ_POLARITY_MASK),
403                                 (sense & IRQ_SENSE_MASK));
404                 /* Processor 0 */
405                 openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
406         }
407
408         /* Init descriptors */
409         for (i = offset; i < NumSources + offset; i++)
410                 irq_desc[i].chip = &open_pic;
411
412         /* Initialize the spurious interrupt */
413         if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
414         openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
415         openpic_disable_8259_pass_through();
416 #ifdef CONFIG_EPIC_SERIAL_MODE
417         if (epic_serial_mode) {
418                 openpic_eicr_set_clk(7);        /* Slowest value until we know better */
419                 openpic_enable_sie();
420         }
421 #endif
422         openpic_set_priority(0);
423
424         if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
425 }
426
427 #ifdef notused
428 static void openpic_enable_8259_pass_through(void)
429 {
430         openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
431                            OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
432 }
433 #endif /* notused */
434
435 static void openpic_disable_8259_pass_through(void)
436 {
437         openpic_setfield(&OpenPIC->Global.Global_Configuration0,
438                          OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
439 }
440
441 /*
442  *  Find out the current interrupt
443  */
444 u_int openpic_irq(void)
445 {
446         u_int vec;
447         DECL_THIS_CPU;
448
449         CHECK_THIS_CPU;
450         vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
451                                 OPENPIC_VECTOR_MASK);
452         return vec;
453 }
454
455 void openpic_eoi(void)
456 {
457         DECL_THIS_CPU;
458
459         CHECK_THIS_CPU;
460         openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
461         /* Handle PCI write posting */
462         (void)openpic_read(&OpenPIC->THIS_CPU.EOI);
463 }
464
465 u_int openpic_get_priority(void)
466 {
467         DECL_THIS_CPU;
468
469         CHECK_THIS_CPU;
470         return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
471                                  OPENPIC_CURRENT_TASK_PRIORITY_MASK);
472 }
473
474 void openpic_set_priority(u_int pri)
475 {
476         DECL_THIS_CPU;
477
478         CHECK_THIS_CPU;
479         check_arg_pri(pri);
480         openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
481                            OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
482 }
483
484 /*
485  *  Get/set the spurious vector
486  */
487 #ifdef notused
488 static u_int openpic_get_spurious(void)
489 {
490         return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
491                                  OPENPIC_VECTOR_MASK);
492 }
493 #endif /* notused */
494
495 static void openpic_set_spurious(u_int vec)
496 {
497         check_arg_vec(vec);
498         openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
499                            vec);
500 }
501
502 #ifdef CONFIG_SMP
503 /*
504  * Convert a cpu mask from logical to physical cpu numbers.
505  */
506 static inline cpumask_t physmask(cpumask_t cpumask)
507 {
508         int i;
509         cpumask_t mask = CPU_MASK_NONE;
510
511         cpus_and(cpumask, cpu_online_map, cpumask);
512
513         for (i = 0; i < NR_CPUS; i++)
514                 if (cpu_isset(i, cpumask))
515                         cpu_set(smp_hw_index[i], mask);
516
517         return mask;
518 }
519 #else
520 #define physmask(cpumask)       (cpumask)
521 #endif
522
523 void openpic_reset_processor_phys(u_int mask)
524 {
525         openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
526 }
527
528 #if defined(CONFIG_SMP) || defined(CONFIG_PM)
529 static DEFINE_SPINLOCK(openpic_setup_lock);
530 #endif
531
532 #ifdef CONFIG_SMP
533 /*
534  *  Initialize an interprocessor interrupt (and disable it)
535  *
536  *  ipi: OpenPIC interprocessor interrupt number
537  *  pri: interrupt source priority
538  *  vec: the vector it will produce
539  */
540 static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
541 {
542         check_arg_ipi(ipi);
543         check_arg_pri(pri);
544         check_arg_vec(vec);
545         openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
546                                 OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
547                                 (pri << OPENPIC_PRIORITY_SHIFT) | vec);
548 }
549
550 /*
551  *  Send an IPI to one or more CPUs
552  *
553  *  Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
554  *  and not a system-wide interrupt number
555  */
556 void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
557 {
558         DECL_THIS_CPU;
559
560         CHECK_THIS_CPU;
561         check_arg_ipi(ipi);
562         openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
563                       cpus_addr(physmask(cpumask))[0]);
564 }
565
566 void openpic_request_IPIs(void)
567 {
568         int i;
569
570         /*
571          * Make sure this matches what is defined in smp.c for
572          * smp_message_{pass|recv}() or what shows up in
573          * /proc/interrupts will be wrong!!! --Troy */
574
575         if (OpenPIC == NULL)
576                 return;
577
578         /*
579          * IPIs are marked IRQF_DISABLED as they must run with irqs
580          * disabled
581          */
582         request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
583                     openpic_ipi_action, IRQF_DISABLED,
584                     "IPI0 (call function)", NULL);
585         request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
586                     openpic_ipi_action, IRQF_DISABLED,
587                     "IPI1 (reschedule)", NULL);
588         request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
589                     openpic_ipi_action, IRQF_DISABLED,
590                     "IPI2 (invalidate tlb)", NULL);
591         request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
592                     openpic_ipi_action, IRQF_DISABLED,
593                     "IPI3 (xmon break)", NULL);
594
595         for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
596                 openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
597 }
598
599 /*
600  * Do per-cpu setup for SMP systems.
601  *
602  * Get IPI's working and start taking interrupts.
603  *   -- Cort
604  */
605
606 void __devinit do_openpic_setup_cpu(void)
607 {
608 #ifdef CONFIG_IRQ_ALL_CPUS
609         int i;
610         cpumask_t msk = CPU_MASK_NONE;
611 #endif
612         spin_lock(&openpic_setup_lock);
613
614 #ifdef CONFIG_IRQ_ALL_CPUS
615         cpu_set(smp_hw_index[smp_processor_id()], msk);
616
617         /* let the openpic know we want intrs. default affinity
618          * is 0xffffffff until changed via /proc
619          * That's how it's done on x86. If we want it differently, then
620          * we should make sure we also change the default values of
621          * irq_desc[].affinity in irq.c.
622          */
623         for (i = 0; i < NumSources; i++)
624                 openpic_mapirq(i, msk, CPU_MASK_ALL);
625 #endif /* CONFIG_IRQ_ALL_CPUS */
626         openpic_set_priority(0);
627
628         spin_unlock(&openpic_setup_lock);
629 }
630 #endif /* CONFIG_SMP */
631
632 /*
633  *  Initialize a timer interrupt (and disable it)
634  *
635  *  timer: OpenPIC timer number
636  *  pri: interrupt source priority
637  *  vec: the vector it will produce
638  */
639 static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
640 {
641         check_arg_timer(timer);
642         check_arg_pri(pri);
643         check_arg_vec(vec);
644         openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
645                                 OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
646                                 (pri << OPENPIC_PRIORITY_SHIFT) | vec);
647 }
648
649 /*
650  *  Map a timer interrupt to one or more CPUs
651  */
652 static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
653 {
654         cpumask_t phys = physmask(cpumask);
655         check_arg_timer(timer);
656         openpic_write(&OpenPIC->Global.Timer[timer].Destination,
657                       cpus_addr(phys)[0]);
658 }
659
660 /*
661  * Change the priority of an interrupt
662  */
663 void __init
664 openpic_set_irq_priority(u_int irq, u_int pri)
665 {
666         check_arg_irq(irq);
667         openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
668                                 OPENPIC_PRIORITY_MASK,
669                                 pri << OPENPIC_PRIORITY_SHIFT);
670 }
671
672 /*
673  * Initalize the interrupt source which will generate an NMI.
674  * This raises the interrupt's priority from 8 to 9.
675  *
676  * irq: The logical IRQ which generates an NMI.
677  */
678 void __init
679 openpic_init_nmi_irq(u_int irq)
680 {
681         check_arg_irq(irq);
682         openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
683 }
684
685 /*
686  *
687  * All functions below take an offset'ed irq argument
688  *
689  */
690
691 /*
692  * Hookup a cascade to the OpenPIC.
693  */
694
695 static struct irqaction openpic_cascade_irqaction = {
696         .handler = no_action,
697         .flags = IRQF_DISABLED,
698         .mask = CPU_MASK_NONE,
699 };
700
701 void __init
702 openpic_hookup_cascade(u_int irq, char *name,
703         int (*cascade_fn)(struct pt_regs *))
704 {
705         openpic_cascade_irq = irq;
706         openpic_cascade_fn = cascade_fn;
707
708         if (setup_irq(irq, &openpic_cascade_irqaction))
709                 printk("Unable to get OpenPIC IRQ %d for cascade\n",
710                                 irq - open_pic_irq_offset);
711 }
712
713 /*
714  *  Enable/disable an external interrupt source
715  *
716  *  Externally called, irq is an offseted system-wide interrupt number
717  */
718 static void openpic_enable_irq(u_int irq)
719 {
720         volatile u_int __iomem *vpp;
721
722         check_arg_irq(irq);
723         vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
724         openpic_clearfield(vpp, OPENPIC_MASK);
725         /* make sure mask gets to controller before we return to user */
726         do {
727                 mb(); /* sync is probably useless here */
728         } while (openpic_readfield(vpp, OPENPIC_MASK));
729 }
730
731 static void openpic_disable_irq(u_int irq)
732 {
733         volatile u_int __iomem *vpp;
734         u32 vp;
735
736         check_arg_irq(irq);
737         vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
738         openpic_setfield(vpp, OPENPIC_MASK);
739         /* make sure mask gets to controller before we return to user */
740         do {
741                 mb();  /* sync is probably useless here */
742                 vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
743         } while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
744 }
745
746 #ifdef CONFIG_SMP
747 /*
748  *  Enable/disable an IPI interrupt source
749  *
750  *  Externally called, irq is an offseted system-wide interrupt number
751  */
752 void openpic_enable_ipi(u_int irq)
753 {
754         irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
755         check_arg_ipi(irq);
756         openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
757
758 }
759
760 void openpic_disable_ipi(u_int irq)
761 {
762         irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
763         check_arg_ipi(irq);
764         openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
765 }
766 #endif
767
768 /*
769  *  Initialize an interrupt source (and disable it!)
770  *
771  *  irq: OpenPIC interrupt number
772  *  pri: interrupt source priority
773  *  vec: the vector it will produce
774  *  pol: polarity (1 for positive, 0 for negative)
775  *  sense: 1 for level, 0 for edge
776  */
777 static void __init
778 openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
779 {
780         openpic_safe_writefield(&ISR[irq]->Vector_Priority,
781                                 OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
782                                 OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
783                                 (pri << OPENPIC_PRIORITY_SHIFT) | vec |
784                                 (pol ? OPENPIC_POLARITY_POSITIVE :
785                                         OPENPIC_POLARITY_NEGATIVE) |
786                                 (sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
787 }
788
789 /*
790  *  Map an interrupt source to one or more CPUs
791  */
792 static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
793 {
794         if (ISR[irq] == 0)
795                 return;
796         if (!cpus_empty(keepmask)) {
797                 cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
798                 cpus_and(irqdest, irqdest, keepmask);
799                 cpus_or(physmask, physmask, irqdest);
800         }
801         openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
802 }
803
804 #ifdef notused
805 /*
806  *  Set the sense for an interrupt source (and disable it!)
807  *
808  *  sense: 1 for level, 0 for edge
809  */
810 static void openpic_set_sense(u_int irq, int sense)
811 {
812         if (ISR[irq] != 0)
813                 openpic_safe_writefield(&ISR[irq]->Vector_Priority,
814                                         OPENPIC_SENSE_LEVEL,
815                                         (sense ? OPENPIC_SENSE_LEVEL : 0));
816 }
817 #endif /* notused */
818
819 /* No spinlocks, should not be necessary with the OpenPIC
820  * (1 register = 1 interrupt and we have the desc lock).
821  */
822 static void openpic_ack_irq(unsigned int irq_nr)
823 {
824 #ifdef __SLOW_VERSION__
825         openpic_disable_irq(irq_nr);
826         openpic_eoi();
827 #else
828         if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
829                 openpic_eoi();
830 #endif
831 }
832
833 static void openpic_end_irq(unsigned int irq_nr)
834 {
835 #ifdef __SLOW_VERSION__
836         if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
837             && irq_desc[irq_nr].action)
838                 openpic_enable_irq(irq_nr);
839 #else
840         if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
841                 openpic_eoi();
842 #endif
843 }
844
845 static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
846 {
847         openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
848 }
849
850 #ifdef CONFIG_SMP
851 static void openpic_ack_ipi(unsigned int irq_nr)
852 {
853         openpic_eoi();
854 }
855
856 static void openpic_end_ipi(unsigned int irq_nr)
857 {
858 }
859
860 static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *regs)
861 {
862         smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset, regs);
863         return IRQ_HANDLED;
864 }
865
866 #endif /* CONFIG_SMP */
867
868 int
869 openpic_get_irq(struct pt_regs *regs)
870 {
871         int irq = openpic_irq();
872
873         /*
874          * Check for the cascade interrupt and call the cascaded
875          * interrupt controller function (usually i8259_irq) if so.
876          * This should move to irq.c eventually.  -- paulus
877          */
878         if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
879                 int cirq = openpic_cascade_fn(regs);
880
881                 /* Allow for the cascade being shared with other devices */
882                 if (cirq != -1) {
883                         irq = cirq;
884                         openpic_eoi();
885                 }
886         } else if (irq == OPENPIC_VEC_SPURIOUS)
887                 irq = -1;
888         return irq;
889 }
890
891 #ifdef CONFIG_SMP
892 void
893 smp_openpic_message_pass(int target, int msg)
894 {
895         cpumask_t mask = CPU_MASK_ALL;
896         /* make sure we're sending something that translates to an IPI */
897         if (msg > 0x3) {
898                 printk("SMP %d: smp_message_pass: unknown msg %d\n",
899                        smp_processor_id(), msg);
900                 return;
901         }
902         switch (target) {
903         case MSG_ALL:
904                 openpic_cause_IPI(msg, mask);
905                 break;
906         case MSG_ALL_BUT_SELF:
907                 cpu_clear(smp_processor_id(), mask);
908                 openpic_cause_IPI(msg, mask);
909                 break;
910         default:
911                 openpic_cause_IPI(msg, cpumask_of_cpu(target));
912                 break;
913         }
914 }
915 #endif /* CONFIG_SMP */
916
917 #ifdef CONFIG_PM
918
919 /*
920  * We implement the IRQ controller as a sysdev and put it
921  * to sleep at powerdown stage (the callback is named suspend,
922  * but it's old semantics, for the Device Model, it's really
923  * powerdown). The possible problem is that another sysdev that
924  * happens to be suspend after this one will have interrupts off,
925  * that may be an issue... For now, this isn't an issue on pmac
926  * though...
927  */
928
929 static u32 save_ipi_vp[OPENPIC_NUM_IPI];
930 static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
931 static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
932 static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
933 static int openpic_suspend_count;
934
935 static void openpic_cached_enable_irq(u_int irq)
936 {
937         check_arg_irq(irq);
938         save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
939 }
940
941 static void openpic_cached_disable_irq(u_int irq)
942 {
943         check_arg_irq(irq);
944         save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
945 }
946
947 /* WARNING: Can be called directly by the cpufreq code with NULL parameter,
948  * we need something better to deal with that... Maybe switch to S1 for
949  * cpufreq changes
950  */
951 int openpic_suspend(struct sys_device *sysdev, pm_message_t state)
952 {
953         int     i;
954         unsigned long flags;
955
956         spin_lock_irqsave(&openpic_setup_lock, flags);
957
958         if (openpic_suspend_count++ > 0) {
959                 spin_unlock_irqrestore(&openpic_setup_lock, flags);
960                 return 0;
961         }
962
963         openpic_set_priority(0xf);
964
965         open_pic.enable = openpic_cached_enable_irq;
966         open_pic.disable = openpic_cached_disable_irq;
967
968         for (i=0; i<NumProcessors; i++) {
969                 save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
970                 openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
971                                    OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
972         }
973
974         for (i=0; i<OPENPIC_NUM_IPI; i++)
975                 save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
976         for (i=0; i<NumSources; i++) {
977                 if (ISR[i] == 0)
978                         continue;
979                 save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
980                 save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
981         }
982
983         spin_unlock_irqrestore(&openpic_setup_lock, flags);
984
985         return 0;
986 }
987
988 /* WARNING: Can be called directly by the cpufreq code with NULL parameter,
989  * we need something better to deal with that... Maybe switch to S1 for
990  * cpufreq changes
991  */
992 int openpic_resume(struct sys_device *sysdev)
993 {
994         int             i;
995         unsigned long   flags;
996         u32             vppmask =       OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
997                                         OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
998                                         OPENPIC_MASK;
999
1000         spin_lock_irqsave(&openpic_setup_lock, flags);
1001
1002         if ((--openpic_suspend_count) > 0) {
1003                 spin_unlock_irqrestore(&openpic_setup_lock, flags);
1004                 return 0;
1005         }
1006
1007         /* OpenPIC sometimes seem to need some time to be fully back up... */
1008         do {
1009                 openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
1010         } while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
1011                         != OPENPIC_VEC_SPURIOUS);
1012         
1013         openpic_disable_8259_pass_through();
1014
1015         for (i=0; i<OPENPIC_NUM_IPI; i++)
1016                 openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
1017                               save_ipi_vp[i]);
1018         for (i=0; i<NumSources; i++) {
1019                 if (ISR[i] == 0)
1020                         continue;
1021                 openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
1022                 openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
1023                 /* make sure mask gets to controller before we return to user */
1024                 do {
1025                         openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
1026                 } while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
1027                          != (save_irq_src_vp[i] & vppmask));
1028         }
1029         for (i=0; i<NumProcessors; i++)
1030                 openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
1031                               save_cpu_task_pri[i]);
1032
1033         open_pic.enable = openpic_enable_irq;
1034         open_pic.disable = openpic_disable_irq;
1035
1036         openpic_set_priority(0);
1037
1038         spin_unlock_irqrestore(&openpic_setup_lock, flags);
1039
1040         return 0;
1041 }
1042
1043 #endif /* CONFIG_PM */
1044
1045 static struct sysdev_class openpic_sysclass = {
1046         set_kset_name("openpic"),
1047 };
1048
1049 static struct sys_device device_openpic = {
1050         .id             = 0,
1051         .cls            = &openpic_sysclass,
1052 };
1053
1054 static struct sysdev_driver driver_openpic = {
1055 #ifdef CONFIG_PM
1056         .suspend        = &openpic_suspend,
1057         .resume         = &openpic_resume,
1058 #endif /* CONFIG_PM */
1059 };
1060
1061 static int __init init_openpic_sysfs(void)
1062 {
1063         int rc;
1064
1065         if (!OpenPIC_Addr)
1066                 return -ENODEV;
1067         printk(KERN_DEBUG "Registering openpic with sysfs...\n");
1068         rc = sysdev_class_register(&openpic_sysclass);
1069         if (rc) {
1070                 printk(KERN_ERR "Failed registering openpic sys class\n");
1071                 return -ENODEV;
1072         }
1073         rc = sysdev_register(&device_openpic);
1074         if (rc) {
1075                 printk(KERN_ERR "Failed registering openpic sys device\n");
1076                 return -ENODEV;
1077         }
1078         rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
1079         if (rc) {
1080                 printk(KERN_ERR "Failed registering openpic sys driver\n");
1081                 return -ENODEV;
1082         }
1083         return 0;
1084 }
1085
1086 subsys_initcall(init_openpic_sysfs);
1087