12 years agoHID: move dell quirks
Jiri Slaby [Thu, 26 Jun 2008 20:25:33 +0000]
HID: move dell quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move sony quirks
Jiri Slaby [Wed, 25 Jun 2008 21:47:04 +0000]
HID: move sony quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: remove rdesc quirk support
Jiri Slaby [Wed, 25 Jun 2008 21:03:55 +0000]
HID: remove rdesc quirk support

Remove support for both dynamic and static report descriptor
quirks. There is no longer rdesc code which it would support,
so it's useless.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: remove hid-input-quirks
Jiri Slaby [Thu, 31 Jul 2008 09:09:37 +0000]
HID: remove hid-input-quirks

Remove the file since these is no user now.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move samsung quirks
Jiri Slaby [Wed, 25 Jun 2008 20:31:48 +0000]
HID: move samsung quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move gyration quirks
Jiri Slaby [Thu, 24 Jul 2008 21:35:13 +0000]
HID: move gyration quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move monterey quirks
Jiri Slaby [Tue, 24 Jun 2008 22:07:50 +0000]
HID: move monterey quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move petalynx quirks
Jiri Slaby [Tue, 24 Jun 2008 21:46:21 +0000]
HID: move petalynx quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move belkin quirks
Jiri Slaby [Tue, 24 Jun 2008 21:24:57 +0000]
HID: move belkin quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move chicony quirks
Jiri Slaby [Tue, 24 Jun 2008 20:48:52 +0000]
HID: move chicony quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move ezkey quirks
Jiri Slaby [Tue, 24 Jun 2008 19:11:21 +0000]
HID: move ezkey quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move cherry quirks
Jiri Slaby [Tue, 24 Jun 2008 18:42:25 +0000]
HID: move cherry quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move a4tech quirks
Jiri Slaby [Mon, 23 Jun 2008 21:31:09 +0000]
HID: move a4tech quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move cypress quirks
Jiri Slaby [Mon, 23 Jun 2008 20:54:08 +0000]
HID: move cypress quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move sunplus quirks
Jiri Slaby [Mon, 23 Jun 2008 19:56:07 +0000]
HID: move sunplus quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move microsoft quirks
Jiri Slaby [Fri, 20 Jun 2008 19:26:11 +0000]
HID: move microsoft quirks

Move them from the core code to a separate driver.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: indent switches/cases
Jiri Slaby [Wed, 18 Jun 2008 21:55:41 +0000]
HID: indent switches/cases

Bring switch and cases into coding style and save thus some
indentation to make the code tighter.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: add compat support
Jiri Slaby [Fri, 16 May 2008 09:49:22 +0000]
HID: add compat support

Add compat option to hid code to allow loading of all modules on
systems which don't allow autoloading because of old userspace.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move apple quirks
Jiri Slaby [Wed, 18 Jun 2008 21:36:49 +0000]
HID: move apple quirks

Move them from the core code to a separate driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move ignore quirks
Jiri Slaby [Fri, 16 May 2008 09:49:20 +0000]
HID: move ignore quirks

Move ignore quirks from usbhid-quirks into hid-core code. Also don't output
warning when ENODEV is error code in usbhid and try ordinal input in hidp
when that error is returned.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move logitech quirks
Jiri Slaby [Fri, 16 May 2008 09:49:19 +0000]
HID: move logitech quirks

Move them from the core and input code to a separate driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move usage input mapping to hid.h
Jiri Slaby [Fri, 16 May 2008 09:49:18 +0000]
HID: move usage input mapping to hid.h

This mapping are currently used on 2 placces and will be needed by more
quirk drivers, so move them to hid.h to allow them to use it.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: move ids into separate file
Jiri Slaby [Wed, 4 Jun 2008 09:02:56 +0000]
HID: move ids into separate file

Move ids from hid-quirks.c into separate file, since it will be needed in
more than one place.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: hid, make parsing event driven
Jiri Slaby [Fri, 16 May 2008 09:49:16 +0000]
HID: hid, make parsing event driven

Next step for complete hid bus, this patch includes:
- call parser either from probe or from hid-core if there is no probe.
- add ll_driver structure and centralize some stuff there (open, close...)
- split and merge usb_hid_configure and hid_probe into several functions
  to allow hooks/fixes between them

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoHID: make a bus from hid code
Jiri Slaby [Fri, 16 May 2008 09:49:15 +0000]
HID: make a bus from hid code

Make a bus from hid core. This is the first step for converting all the
quirks and separate almost-drivers into real drivers attached to this bus.

It's implemented to change behaviour in very tiny manner, so that no driver
needs to be changed this time.

Also add generic drivers for both usb and bt into usbhid or hidp
respectively which will bind all non-blacklisted device. Those blacklisted
will be either grabbed by special drivers or by nobody if they are broken at
the very rude base.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agomodpost: add support for hid
Jiri Slaby [Mon, 19 May 2008 13:50:01 +0000]
modpost: add support for hid

Generate aliases for hid device modules to support autoloading.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Mon, 13 Oct 2008 21:15:06 +0000]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (66 commits)
  ata: Add documentation for hard disk shock protection interface (v3)
  ide: Implement disk shock protection support (v4)
  ide-cd: fix printk format warning
  piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list
  ide-atapi: assign taskfile flags per device type
  ide-cd: move cdrom_info.dma to ide_drive_t.dma
  ide: add ide_drive_t.dma flag
  ide-cd: add a debug_mask module parameter
  ide-cd: convert driver to new ide debugging macro (v3)
  ide: move SFF DMA code to ide-dma-sff.c
  ide: cleanup ide-dma.c
  ide: cleanup ide_build_dmatable()
  ide: remove needless includes from ide-dma.c
  ide: switch to DMA-mapping API part #2
  ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
  ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
  ide: __ide_dma_end() -> ide_dma_end()
  pmac: remove needless pmac_ide_destroy_dmatable() wrapper
  pmac: remove superfluous pmif == NULL checks
  ide: Two fixes regarding memory allocation
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
Linus Torvalds [Mon, 13 Oct 2008 21:12:40 +0000]
Merge git://git./linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits)
  pcmcia: ioctl-internal definitions
  pcmcia: cistpl header cleanup
  pcmcia: remove unused argument to pcmcia_parse_tuple()
  pcmcia: card services header cleanup
  pcmcia: device_id header cleanup
  pcmcia: encapsulate ioaddr_t
  pcmcia: cleanup device driver header file
  pcmcia: cleanup socket services header file
  pcmcia: merge ds_internal.h into cs_internal.h
  pcmcia: cleanup cs_internal.h
  pcmcia: cs_internal.h is internal
  pcmcia: use dev_printk for cs_error()
  pcmcia: remove CS_ error codes alltogether
  pcmcia: deprecate CS_BAD_TUPLE
  pcmcia: deprecate CS_BAD_ARGS
  pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE
  pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE
  pcmcia: deprecate CS_NO_MORE_ITEMS
  pcmcia: deprecate CS_IN_USE
  pcmcia: deprecate CS_CONFIGURATION_LOCKED
  ...

Fix trivial conflict in drivers/pcmcia/ds.c manually

12 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Mon, 13 Oct 2008 21:03:59 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits)
  V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards
  V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default
  V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default.
  V4L/DVB (9183): S2API: Return error of the caller provides 0 commands.
  V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY
  V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE
  V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP
  V4L/DVB (9179): S2API: frontend.h cleanup
  V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.
  V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16
  V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator.
  V4L/DVB (9175): Remove NULL pointer in stb6000 driver.
  V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator.
  V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation
  V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API.
  V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API.
  V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod.
  V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams.
  V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote
  V4L/DVB: v4l2-dev: remove duplicated #include
  ...

12 years agoata: Add documentation for hard disk shock protection interface (v3)
Elias Oltmanns [Mon, 13 Oct 2008 19:39:50 +0000]
ata: Add documentation for hard disk shock protection interface (v3)

Put some information (and pointers to more) into the kernel's doc tree,
describing briefly the interface to the kernel's disk head unloading
facility. Information about how to set up a complete shock protection
system under GNU/Linux can be found on the web and is referenced
accordingly.

v3:
Here is some final polish including various spelling corrections
pointed out by Grant Grundler and Peter Moulder. Also, I have added some
information about the timing constraints related to disk head parking.
The patch looks more impressive than it really is and I think it would
be alright just to incorporate it into the original patch so as not to
clutter up the git log.

Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: Implement disk shock protection support (v4)
Elias Oltmanns [Mon, 13 Oct 2008 19:39:50 +0000]
ide: Implement disk shock protection support (v4)

On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD
FEATURE as specified in ATA-7 is issued to the device and processing of
the request queue is stopped thereafter until the specified timeout
expires or user space asks to resume normal operation. This is supposed
to prevent the heads of a hard drive from accidentally crashing onto the
platter when a heavy shock is anticipated (like a falling laptop expected
to hit the floor). Port resets are deferred whenever a device on that
port is in the parked state.

v3:
Elias Oltmanns <eo@nebensachen.de> wrote:
[...]
> >> 1. Make sure that no negative value is being passed to
> >>    jiffies_to_msecs() in ide_park_show().
> >> 2. Drop the superfluous variable hwif in ide_special_rq().
> >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not
> >>    handling a (un)park request.
> >
> > Well, #3 should have been done differently because we donn't want to
> > check for REQ_(UN)?PARK_HEADS more often than is necessary.
>
> While preparing the backport to 2.6.27, it has just occurred to me that
> we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset()
> because this flag must not be set after *any* sort of access to the
> device.

v4:
Fix a memory leak due to a missing blk_put_request() in
issue_park_cmd(). Additionally, we should plug the queue when enqueueing
the unpark request because there is no guarantee that the park timeout
has not expired by then. Even though the chance for that to happen is
very slim, the request might end up hanging in the queue until the next
I/O operation is queued up. While at it, clean up the code a little:
- make issue_park_cmd() a function of type void since nobody cares for
  the return value anyway;
- use blk_start_queueing() instead of __blk_run_queue() since we don't
  have to worry about recursion;
- remove a superfluous pointer deference in task_no_data_intr().

Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Cc: Jeff Garzik <jeff@garzik.org>,
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-cd: fix printk format warning
Alexander Beregalov [Mon, 13 Oct 2008 19:39:50 +0000]
ide-cd: fix printk format warning

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agopiix: add Hercules EC-900 mini-notebook to ich_laptop short cable list
Herton Ronaldo Krzesinski [Mon, 13 Oct 2008 19:39:50 +0000]
piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-atapi: assign taskfile flags per device type
Borislav Petkov [Mon, 13 Oct 2008 19:39:50 +0000]
ide-atapi: assign taskfile flags per device type

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-cd: move cdrom_info.dma to ide_drive_t.dma
Borislav Petkov [Mon, 13 Oct 2008 19:39:49 +0000]
ide-cd: move cdrom_info.dma to ide_drive_t.dma

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add ide_drive_t.dma flag
Borislav Petkov [Mon, 13 Oct 2008 19:39:49 +0000]
ide: add ide_drive_t.dma flag

This flag is to accomodate ide-cd functionality into ide atapi.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-cd: add a debug_mask module parameter
Borislav Petkov [Mon, 13 Oct 2008 19:39:49 +0000]
ide-cd: add a debug_mask module parameter

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
[bart: no need to zero debug_mask + move it next to module_param()]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-cd: convert driver to new ide debugging macro (v3)
Borislav Petkov [Mon, 13 Oct 2008 19:39:48 +0000]
ide-cd: convert driver to new ide debugging macro (v3)

Also,

- leave in the possibility for optimizing away all debugging macros
- add a PFX macro and prepend all printk calls with it for consistency
- add debug macro calls in important driver paths
- remove #if 0-ed code
- mv restore_request -> ide_cd_restore_request
- add a driver registration printk

v2:
failed_command can be NULL so check it before accessing it

v3:
fix another NULL ptr in debug statement

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: move SFF DMA code to ide-dma-sff.c
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:47 +0000]
ide: move SFF DMA code to ide-dma-sff.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: cleanup ide-dma.c
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:47 +0000]
ide: cleanup ide-dma.c

- s/HWIF(drive)/drive->hwif/
- s/HWGROUP(drive)/[drive->]hwif->hwgroup/
- fixup error messages in ide_dma_intr() & dma_timer_expiry()
- fix checkpatch.pl errors/warnings

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: cleanup ide_build_dmatable()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:47 +0000]
ide: cleanup ide_build_dmatable()

- use for_each_sg()
- move printing 'DMA table too small' message below use_pio_instead label
- merge '64KB bug' comment with function documentation
- fix intendation

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove needless includes from ide-dma.c
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:47 +0000]
ide: remove needless includes from ide-dma.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: switch to DMA-mapping API part #2
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:47 +0000]
ide: switch to DMA-mapping API part #2

Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf
("ide: switch to DMA-mapping API"):

* pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent()
  in ide_{allocate,release}_dma_engine().

* Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t
  (+ set default values in ide_allocate_dma_engine()).

* Make ide_{allocate,release}_dma_engine() available also
  for CONFIG_BLK_DEV_IDEDMA_SFF=n.  Then convert au1xxx-ide.c,
  scc_pata.c and sgiioc4.c to use them.

* Add missing ->init_dma method to scc_pata.

This patch also fixes:
- ->dmatable_cpu leak for au1xxx-ide
- too early realease of ->dmatable_cpu for scc_pata
- wrong amount of ->dmatable_cpu memory being freed for sgiioc4

While at it:
- remove superfluous ->dma_base check from ide_unregister()
- return -ENOMEM on error in ide_release_dma_engine()
- beautify error message in ide_release_dma_engine()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:46 +0000]
ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n

Make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
and convert {ics,au1xxx-}ide.c to use it.

While at it:
- dump ATA Status register content on error
- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:46 +0000]
ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n

Make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n
and convert {ics,au1xxx-}ide.c to use it.

While at it:
- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: __ide_dma_end() -> ide_dma_end()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:46 +0000]
ide: __ide_dma_end() -> ide_dma_end()

While at it:
- use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agopmac: remove needless pmac_ide_destroy_dmatable() wrapper
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:45 +0000]
pmac: remove needless pmac_ide_destroy_dmatable() wrapper

hwif->sg_nents is always != 0 when this function is called
and there is also no need to explicitely zero hwif->sg_nents.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agopmac: remove superfluous pmif == NULL checks
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:45 +0000]
pmac: remove superfluous pmif == NULL checks

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: Two fixes regarding memory allocation
Elias Oltmanns [Mon, 13 Oct 2008 19:39:45 +0000]
ide: Two fixes regarding memory allocation

In function ide_devset_execute() we should use __GFP_WAIT rather than
GFP_KERNEL. Also, the allocation cannot possibly fail at that point.
More importantly, there is a potential memory leak in the device probing
code. The infrastructure seems rather complex and I hope I haven't messed
anything up by trying to fix this.

Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
[bart: remove superfluous ide_lock taking]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-disk: move /proc handling to ide-disk_proc.c (take 3)
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:45 +0000]
ide-disk: move /proc handling to ide-disk_proc.c (take 3)

While at it:
- idedisk_capacity() -> ide_disk_capacity()
- idedisk_proc[] -> ide_disk_proc[]
- idedisk_settings[] -> ide_disk_settings[]

v2/3:
Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-disk: move all ioctl handling to ide-disk_ioctl.c
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:45 +0000]
ide-disk: move all ioctl handling to ide-disk_ioctl.c

While at it:
- idedisk_ioctl() -> ide_disk_ioctl()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-floppy: move /proc handling to ide-floppy_proc.c (take 2)
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:44 +0000]
ide-floppy: move /proc handling to ide-floppy_proc.c (take 2)

While at it:
- idefloppy_capacity() -> ide_floppy_capacity()
- idefloppy_proc[] -> ide_floppy_proc[]
- idefloppy_settings[] -> ide_floppy_settings[]

v2:
Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-floppy: move all ioctl handling to ide-floppy_ioctl.c (take 2)
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:44 +0000]
ide-floppy: move all ioctl handling to ide-floppy_ioctl.c (take 2)

While at it:
- idefloppy_ioctl() -> ide_floppy_ioctl()

v2:
Fix for idefloppy_ioctl name change from Stephen Rothwell.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-cd: no need to zero drive->special.all
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:43 +0000]
ide-cd: no need to zero drive->special.all

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:43 +0000]
ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify()

Set IDE_AFLAG_DRQ_INTERRUPT in do_identify() instead of ATAPI
device drivers *_setup() methods.

While at it:
- use ata_id_cdb_intr()

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove ide_host_alloc_all()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:43 +0000]
ide: remove ide_host_alloc_all()

* Remove no longer used ide_host_alloc_all().

* Add MAX_HOST_PORTS define and use it instead of MAX_HWIFS
  as the maximum number of host ports possible.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-generic: remove no longer needed ide_probe_legacy()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:42 +0000]
ide-generic: remove no longer needed ide_probe_legacy()

There is now a generic solution [ide_generic_check_pci_legacy_iobases()]
so MIPS-specific ide_probe_legacy() is no longer necessary.

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-generic: no need to probe all ports at once
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:42 +0000]
ide-generic: no need to probe all ports at once

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: ->ide_dma_clear_irq() -> ->clear_irq()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:42 +0000]
ide: ->ide_dma_clear_irq() -> ->clear_irq()

* Rename ->ide_dma_clear_irq method to ->clear_irq
  and move it from ide_hwif_t to struct ide_port_ops.

* Move ->waiting_for_dma check inside ->clear_irq method.

* Move ->dma_base check inside ->clear_irq method.

piix.c:
* Add ich_port_ops and remove init_hwif_ich() wrapper.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: use unique names for struct pci_driver instances
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:41 +0000]
ide: use unique names for struct pci_driver instances

Noticed-by: Russell King <rmk+lkml@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:41 +0000]
ide: merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr()

* Add 'struct task_s' to ide_hwif_t and init it to the current command
  in do_rw_taskfile().

* Merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: factor out reset error reporting from reset_pollfunc()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:41 +0000]
ide: factor out reset error reporting from reset_pollfunc()

Factor out reset error reporting from reset_pollfunc()
to ide_reset_report_error() helper.

While at it:
- fix KERN_* printk() levels
- remove 'switch ()'

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: convert 'pio_mode' device setting to use DS_SYNC flag
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:40 +0000]
ide: convert 'pio_mode' device setting to use DS_SYNC flag

* Convert 'pio_mode' device setting to use DS_SYNC flag.

* Remove unused special_t.b.{set_tune,serviced} and ide_drive_t.tune_req.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove [ata_]select_t
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:40 +0000]
ide: remove [ata_]select_t

* Use 'drive->dn & 1' in ide_init_disk().

* remove [ata_]select_t.

While at it:

* Use ATA_DEVICE_OBS define in ide_port_init_devices_data().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: use 'drive->dn & 1' instead of drive->select.b.unit
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:40 +0000]
ide: use 'drive->dn & 1' instead of drive->select.b.unit

* Call ide_port_init_devices() in ide_host_register()
  also if 'struct ide_port_info *d' is not available.

* Init drive->dn in ide_port_init_devices() instead of
  ide_probe_port() so it is valid also in ->init_dev.

* Pass device number to ide_dev_apply_params().

* Use 'drive->dn & 1' instead of drive->select.b.unit.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agocy82c693: remove no longer needed CY82C693_DEBUG_LOGS code
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:39 +0000]
cy82c693: remove no longer needed CY82C693_DEBUG_LOGS code

Having CY82C693_DEBUG_INFO is enough nowadays.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agocy82c693: remove dead CY82C693_SETDMA_CLOCK code
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:39 +0000]
cy82c693: remove dead CY82C693_SETDMA_CLOCK code

Remove dead CY82C693_SETDMA_CLOCK code and now not needed
init_chipset_cy82c693().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: sanitize ide*_pm_* enums
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:38 +0000]
ide: sanitize ide*_pm_* enums

* Move ide*_pm_* enums from ide-io.c to <linux/ide.h>.

* idedisk_pm_* -> ide_pm_*

* ide_pm_state_* -> ide_pm_*

* No need to set ide_pm_* enums to the fixed values.

* Uppercase ide_pm_* enums.

* Fix/update comments.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: fix HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:38 +0000]
ide: fix HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices

Add IDE_DFLAG_LBA device flag and use it instead of ->select.b.lba.

Since ->tf_load uses ->select.all for ATA Device/Head register this
fixes HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove superfluous ->waiting_for_dma checks
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:38 +0000]
ide: remove superfluous ->waiting_for_dma checks

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove superfluous ->dma field from ide_hwif_t
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:37 +0000]
ide: remove superfluous ->dma field from ide_hwif_t

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove superfluous ->media field from ide_driver_t
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:37 +0000]
ide: remove superfluous ->media field from ide_driver_t

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: DMA_PIO_RETRY -> IDE_DFLAG_DMA_PIO_RETRY
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:37 +0000]
ide: DMA_PIO_RETRY -> IDE_DFLAG_DMA_PIO_RETRY

Add IDE_DFLAG_DMA_PIO_RETRY and use it instead of
ide_drive_t.state + DMA_PIO_RETRY.

There should be no functional changes cause by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add device flags
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:36 +0000]
ide: add device flags

Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields
to IDE_DFLAG_* flags.

While at it:
- IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48
- fixup some comments
- remove needless g->flags zeroing from ide*_probe()

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-disk: add ide_do_setfeature() helper
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:36 +0000]
ide-disk: add ide_do_setfeature() helper

Add ide_do_setfeature() helper and convert set_{wcache,acoustic}()
to use it.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-disk: set_addressing() fixes
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:36 +0000]
ide-disk: set_addressing() fixes

* Return -EIO if arg > 0 and LBA48 is unsupported.

* No need to reset ->addressing.

* Make ->addressing a single bit flag.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: fix IDE ACPI for slave device-only configurations
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:35 +0000]
ide: fix IDE ACPI for slave device-only configurations

ACPI _GTM / _PS0 / _STM were not called if only slave device was present.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-floppy: add a debug_mask module parameter
Borislav Petkov [Mon, 13 Oct 2008 19:39:35 +0000]
ide-floppy: add a debug_mask module parameter

... with which to control to verbosity of debug messages on module load time.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
[bart: no need to zero debug_mask + move module_param() closer debug_mask]
[bart: init drive->debug_mask in ide_floppy_probe() not in idefloppy_open()]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-floppy: convert driver to the new debugging macro
Borislav Petkov [Mon, 13 Oct 2008 19:39:35 +0000]
ide-floppy: convert driver to the new debugging macro

Also:

- leave in the possibility for optimizing away all debugging macros
- add a PFX macro and prepend all printk calls with it for consistency
- change idefloppy_create_rw_cmd's 1st arg from idefloppy_floppy_t * to
ide_drive_t *.
- add a missing printk-level in idefloppy_init
- fix minor checkpatch warnings

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add a driver-wide debugging macro
Borislav Petkov [Mon, 13 Oct 2008 19:39:35 +0000]
ide: add a driver-wide debugging macro

Add __ide_debug_log() debugging macro which is controlled by drive->debug_mask.
The macro has to have the macro DRV_NAME defined in each driver before use.
Also, add different debugging levels depending on the functionality debugged.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add drive->debug_mask switch
Borislav Petkov [Mon, 13 Oct 2008 19:39:34 +0000]
ide: add drive->debug_mask switch

Add a debugging on/off switch for controlling driver debugging
messages dynamically.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: unify conversion macros
Borislav Petkov [Mon, 13 Oct 2008 19:39:34 +0000]
ide: unify conversion macros

Introduce to_ide_drv() and ide_drv_g() macros and replace the respective
definitions of similar ones in each driver.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoxtensa: remove dead CONFIG_BLK_DEV_IDE code
Adrian Bunk [Mon, 13 Oct 2008 19:39:34 +0000]
xtensa: remove dead CONFIG_BLK_DEV_IDE code

I don't know why this was there, but it was dead code.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: chris@zankel.net
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove unnecessary MAX_HWIFS checks from ide-probe.c
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:33 +0000]
ide: remove unnecessary MAX_HWIFS checks from ide-probe.c

MAX_HWIFS is now always equal to the number of IDE major numbers.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove CONFIG_BLK_DEV_IDE config option (take 2)
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:33 +0000]
ide: remove CONFIG_BLK_DEV_IDE config option (take 2)

Because hd.c was moved to drivers/block/ this config option
is superfluous now and may be removed.

v2:
Fix drivers/ide/Makefile (noticed by Adrian Bunk).

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: make ide_transfer_pc() static
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:32 +0000]
ide: make ide_transfer_pc() static

* Move ->ticks field from struct ide_floppy_obj to ide_drive_t.

* Move idefloppy_transfer_pc() to ide-atapi.c and make
  ide_transfer_pc() use it.

* Always use ide_transfer_pc as a handler in ide_issue_pc().

* Remove no longer used idefloppy_start_pc_transfer(),
  ide*_transfer_pc() and 'handler' argument from ide_issue_pc().

* Make ide_transfer_pc() static.

While at it:

* idefloppy_transfer_pc() -> ide_delayed_transfer_pc()

* IDEFLOPPY_TICKS_DELAY -> IDEFLOPPY_PC_DELAY

* ->ticks -> ->pc_delay

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: make ide_pc_intr() static
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:32 +0000]
ide: make ide_pc_intr() static

* Always use ide_pc_intr as a handler in ide_pc_intr().

* Remove no longer used ide*_pc_intr() and 'handler'
  argument from ide_{transfer_pc,pc_intr}().

* Make ide_pc_intr() static.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add ->pc_{update,io}_buffers methods
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:32 +0000]
ide: add ->pc_{update,io}_buffers methods

Add ->pc_{update,io}_buffers methods to ide_drive_t and use
them instead of {update,io}_buffers ide_pc_intr() arguments.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add ide_retry_pc() helper
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:32 +0000]
ide: add ide_retry_pc() helper

* Add ide_create_request_sense_cmd() and ide_retry_pc() helpers
  and convert ide-{atapi,floppy,tape}.c to use them.

* Remove no longer used ide*_create_request_sense_cmd(),
  ide*_retry_pc() and 'retry_pc' argument from ide_pc_intr().

* Make ide_queue_pc_head() static.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add request_sense_{pc,rq} to ide_drive_t
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:31 +0000]
ide: add request_sense_{pc,rq} to ide_drive_t

Add 'struct ide_atapi_pc request_sense_pc' and 'request request_sense_rq' to
ide_drive_t and use them instead of fields in struct ide_{floppy,tape}_obj.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: drop 'timeout' and 'expiry' arguments from ide_pc_intr()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:31 +0000]
ide: drop 'timeout' and 'expiry' arguments from ide_pc_intr()

* Move idescsi_expiry() to ide-atapi.c.

* Move get_timeout() to <linux/ide.h>.

* Drop 'timeout' and 'expiry' arguments from ide_pc_intr().

While at it:

* idescsi_expiry() -> ide_scsi_expiry()

* get_timeout() -> ide_scsi_get_timeout()

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add pointer to the current packet command to ide_drive_t
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:31 +0000]
ide: add pointer to the current packet command to ide_drive_t

* Add pointer to the current packet command (struct ide_atapi_pc *pc)
  to ide_drive_t and use it instead of the pointer in struct ide_*_obj.

* Use drive->pc in ide_{issue,transfer}_pc() and ide_pc_intr()
  instead of 'pc' argument.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: drop dsc_handle argument from ide_pc_intr()
Bartlomiej Zolnierkiewicz [Mon, 13 Oct 2008 19:39:30 +0000]
ide: drop dsc_handle argument from ide_pc_intr()

* Add 'int dsc' argument to ->pc_callback method.

* Call ide_tape_handle_dsc() internally in ide_tape_callback()
  if dsc argument is set and update ide_pc_intr() accordingly.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agosgiioc4: fix messages
Sergei Shtylylov [Mon, 13 Oct 2008 19:39:30 +0000]
sgiioc4: fix messages

Fix several issues with the log messages printed by ide_dma_sgiioc4() and
sgiioc4_ide_setup_pci_device():

- IOC4 registers are memory-mapped but the "BM-DMA at" format corresponds to
  I/O  mapped registers;

- "%p" format specifiers and type casts used to print non-pointer values;

- using KERN_INFO log level for the error message;

- 'hwif->name' printed as drive's name.

While at it, also:

- return more fitting -EBUSY if request_mem_region() fails;

- make the error message style consistent;

- fix indentation, put the printk() facility and message on the same line;

- use comparisions with NULL instead of ! operator..

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agosgiioc4: sgiioc4_read_status drive busy check fix
Sergei Shtylylov [Mon, 13 Oct 2008 19:39:29 +0000]
sgiioc4: sgiioc4_read_status drive busy check fix

Fix the drive non-busy criterion used by sgiioc4_read_status(): neither of the
bits it expects to be set guarantees that the drive is not busy (and might be
interrupting), only the BSY bit itself being zero gurantees that.
While at it, use ATA_BUSY instead of hardcoded value everywhere...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoMAINTAINERS: move F: line so that it does not break S: line info
Randy Dunlap [Mon, 13 Oct 2008 16:24:58 +0000]
MAINTAINERS: move F: line so that it does not break S: line info

Move F: line so that it doesn't break the S: line and its
explanations.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Jianjun Kong <kongjianjun@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agovfs: Use const for kernel parser table
Steven Whitehouse [Mon, 13 Oct 2008 09:46:57 +0000]
vfs: Use const for kernel parser table

This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Mon, 13 Oct 2008 17:08:43 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits)
  Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks
  Blackfin arch: Fix bogus str_ident check in gpio code
  Blackfin arch: AD7879 Touchscreen driver
  Blackfin arch: introducing bfin_addr_dcachable
  Blackfin arch: fix a typo in comments
  Blackfin arch: Remove useless head file
  Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542)
  Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible
  Blackfin arch: update anomaly headers to match the latest sheet
  Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart()
  Blackfin arch: print out error/warning if you are running on the incorrect CPU type
  Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts
  Blackfin arch: update board defconfigs
  Blackfin arch: Add optional verbose debug
  Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface
  Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1)
  Blackfin arch: ptrace - fix off-by-one check on end of memory regions
  Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display
  Blackfin arch: flash memory map and dm9000 resources updating
  Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 13 Oct 2008 17:08:08 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net/mac80211/rx.c: fix build error
  acpi: Make ACPI_TOSHIBA depend on INPUT.
  net/bfin_mac.c MDIO namespace fixes
  jme: remove unused #include <version.h>
  netfilter: remove unused #include <version.h>
  net: Fix off-by-one in skb_dma_map
  smc911x: Add support for LAN921{5,7,8} chips from SMSC
  qlge: remove duplicated #include
  wireless: remove duplicated #include
  net/au1000_eth.c MDIO namespace fixes
  net/tc35815.c: fix compilation
  sky2: Fix WOL regression
  r8169: NULL pointer dereference on r8169 load

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 13 Oct 2008 17:07:53 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  chmc: Mark %ver register inline asm with __volatile__
  sparc64: Add missing notify_cpu_starting() call.
  sparc32: fix build errors