15 years ago[PARISC] Explicitly specify sr4 when flushing kernel space
Matthew Wilcox [Sat, 22 Oct 2005 02:56:14 +0000]
[PARISC] Explicitly specify sr4 when flushing kernel space

Specify sr4 when flushing kernel space (we could equally well use sr5-7,
but must not use sr0).

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Properly specify index field to I/D cache flush ops
Grant Grundler [Sat, 22 Oct 2005 02:55:51 +0000]
[PARISC] Properly specify index field to I/D cache flush ops

replace use of "0" with "%r0" since PA 1.1 I/D flush ops only take a
general register and not an immediate value for the index field.
This just forces the code to always be PA 1.1 "clean".

From: Joel Soete <soete.joel@tiscali.be>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Fix copy_user_page_asm to NOT access past end of page
Grant Grundler [Sat, 22 Oct 2005 02:55:34 +0000]
[PARISC] Fix copy_user_page_asm to NOT access past end of page

2.6.12-rc2-pa3 fix copy_user_page_asm to NOT access past end of page.

My bad. /o\
Lamont confirmed that instructions following a conditional
branch are *alway* executed regardless if the branch is taken or not.
Unless they are nullified (which was missing in this case).

He also noted:
Conditional branches nullify on forward taken branch, and on
non-taken backward branch. Note that .+4 is a backwards branch.

This makes alot more sense than the giberish in the PA20 arch book.

Compiles and boots on both 64-bit (a500) and 32-bit (j6k).

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Add NETPOLL support to lasi_82596
Sven Schnelle [Sat, 22 Oct 2005 02:55:15 +0000]
[PARISC] Add NETPOLL support to lasi_82596

add netpoll support
Patch by Sven Schnelle <svens@gmx.de>

Signed-off-by: Sven Schnelle <svens@gmx.de>
Signed-off-by: Helge Deller <deller@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Remove the spurious do_softirq calls from entry.S
James Bottomley [Sat, 22 Oct 2005 02:54:38 +0000]
[PARISC] Remove the spurious do_softirq calls from entry.S

remove the spurious do_softirq calls from entry.S

With these in we were calling do_softirq twice; plus the calls in
entry.S took no account of nesting.

Signed-off-by: James Bottomley <jejb@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Define pgprot_noncached macro in pgtable.h
Grant Grundler [Sat, 22 Oct 2005 02:54:20 +0000]
[PARISC] Define pgprot_noncached macro in pgtable.h

drivers/infiniband depends on definition of pgprot_noncached() macro.
Someone else will have to fix it's wrong.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Add other CRT_ID for newer cards to grfioctl.h
Kyle McMartin [Sat, 22 Oct 2005 02:54:00 +0000]
[PARISC] Add other CRT_ID for newer cards to grfioctl.h

Add IDs for some other STI graphics cards found on HP PA-RISC
machines.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Add ECANCELED to errno.h
Grant Grundler [Sat, 22 Oct 2005 02:53:43 +0000]
[PARISC] Add ECANCELED to errno.h

add ECANCELED - SuSv3 wants one L.  IB/SDP actually returns this error.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Fix the alloc_slabmgmt panic
James Bottomley [Sat, 22 Oct 2005 02:53:26 +0000]
[PARISC] Fix the alloc_slabmgmt panic

Fix the alloc_slabmgmt panic

Hopefully this should also fix a lot of other intermittent kernel bugs.

The problem has been around since 2.6.9-rc2-pa6 when we allowed
floating point registers to be used in kernel code.  The essence of
the problem is that gcc prefers to use floating point for integer
divides and multiples.  Further, it can rely on the values in the no
clobber fp regs being correct across a function call.  Unfortunately,
our task switch function only saves the integer no clobber registers,
not the fp ones, so if gcc makes a function call to any function in
the kernel which could sleep, the values it is relying on in any no
clobber floating point register may be lost.  In the case of
alloc_slabmgmt, the value of the page offset is being stored in %fr12
across a call to kmem_getpages(), which sleeps if no pages are
available.  Thus, the offset can be trashed and the slab code can end
up with a completely bogus address leading to corruption.

Kudos to Randolph who came up with the program to trip this problem at
will and thus allowed it to be tracked and fixed.

Signed-off-by: James Bottomley <jejb@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Implement 5 argument clone.
Carlos O'Donell [Sat, 22 Oct 2005 02:53:04 +0000]
[PARISC] Implement 5 argument clone.

* arch/parisc/kernel/process.c (sys_clone): Use 5 args, and process
  CLONE_PARENT_SETTID, CLONE_CHILD_SETTID, CLONE_CHILD_CLEARTID.
  (copy_thread): First cut at CLONE_SETTLS.

Signed-off-by: Carlos O'Donell <carlos@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Update Kconfig for itimer selection
Grant Grundler [Sat, 22 Oct 2005 02:52:46 +0000]
[PARISC] Update Kconfig for itimer selection

2.6.14-rc2-pa1: enable 100/250/1000HZ itimer selection

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Mark floppy as broken.  Thanks Joel

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

make DISCONTIGMEM depend on 64BIT

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Update minimum compiler version and CROSS_COMPILE for parisc64
Randolph Chung [Sat, 22 Oct 2005 02:52:00 +0000]
[PARISC] Update minimum compiler version and CROSS_COMPILE for parisc64

Prefix changed in debian, include "gnu" in the commandline.

Signed-off-by: Carlos O'Donell <carlos@parisc-linux.org>

Ensure the compiler version is new enough (>= 3.3)

Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Document history of PDC_NARROW as it is now obsolete
Grant Grundler [Sat, 22 Oct 2005 02:51:40 +0000]
[PARISC] Document history of PDC_NARROW as it is now obsolete

Document history of PDC_NARROW a bit as it will still show
up in an older kernel's .config file.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] kfree cleanups to ioctl32.c
Jesper Juhl [Sat, 22 Oct 2005 02:51:23 +0000]
[PARISC] kfree cleanups to ioctl32.c

2.6.12-rc2-pa2 kfree cleanups from Jesper Juhl

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Cleanup whitespace and handle proc_mkdir() failures in pci-dma.c
Grant Grundler [Sat, 22 Oct 2005 02:50:48 +0000]
[PARISC] Cleanup whitespace and handle proc_mkdir() failures in pci-dma.c

1) cleanup whitespace and handle proc_mkdir() failures.
   From: Christophe Lucas <clucas@rotomalug.org>

2) rename "dino" entry to "pcxl_dma"...also seems like it's in
   the wrong location.

3) don't dump resource bitmap in /proc/pcxl_dma output

4) fixup compiler warning

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] More informative error message in pcibios_link_hba_resources
Grant Grundler [Sat, 22 Oct 2005 02:50:33 +0000]
[PARISC] More informative error message in pcibios_link_hba_resources

Generate a more informative message when a resource does not have
a parent.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Update pdc console from parisc tree
Matthew Wilcox [Sat, 22 Oct 2005 02:50:06 +0000]
[PARISC] Update pdc console from parisc tree

Get rid of some unnecessary includes
Remove a layer of macro indirection around pdc_console_device
Delete pdc_console_die() as it is unused
Avoid double-printing on panic by clearing CON_PRINTBUFFER rather than
setting con_start to be log_end
Make con_start and log_end static again

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Prevent signal loops if we have a problem setting up a frame
Randolph Chung [Sat, 22 Oct 2005 02:49:47 +0000]
[PARISC] Prevent signal loops if we have a problem setting up a frame

2.6.13-rc6-pa2
use force_sigsegv() if we have a problem setting up a frame. This is
required to prevent SIGSEGV loops.

Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Add printing of fpregs state to stack dump
Thibaut Varene [Sat, 22 Oct 2005 02:49:25 +0000]
[PARISC] Add printing of fpregs state to stack dump

We're using fp regs now in the kernel, so we want to print them
on stack dump

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Fix compile warning in pci.h
Matthew Wilcox [Sat, 22 Oct 2005 02:49:05 +0000]
[PARISC] Fix compile warning in pci.h

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Disable use of fpregs in pa_memcpy
Randolph Chung [Sat, 22 Oct 2005 02:48:34 +0000]
[PARISC] Disable use of fpregs in pa_memcpy

Disable use of fpregs in pa_memcpy, and turn on the
-mdisable-fpregs flag.

Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Initialize serial spinlocks in superio.c
Kyle McMartin [Sat, 22 Oct 2005 02:48:03 +0000]
[PARISC] Initialize serial spinlocks in superio.c

git commit 976ecd12b8144d066a23fe97c6fbfc1ac8470af7 changed our locking
characteristics, and put the onus of spin_lock_init on superio.c.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Add sync required after fdc to enforce insn ordering
Grant Grundler [Sat, 22 Oct 2005 02:47:40 +0000]
[PARISC] Add sync required after fdc to enforce insn ordering

PA20 arch book (page 7-52 and 7-55) indicate a "sync" is required after
the FDC "to enforce instruction ordering". And we want to make
sure FIC is executed after FDC has retired.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Minor iosapic.c cleanup
Grant Grundler [Sat, 22 Oct 2005 02:47:04 +0000]
[PARISC] Minor iosapic.c cleanup

minor cleanup: qualify constant with "UL"

Acked-by: "Hmamouche, Youssef" <youssef@ece.utexas.edu>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Replace uses of __LP64__ with CONFIG_64BIT
Grant Grundler [Sat, 22 Oct 2005 02:46:48 +0000]
[PARISC] Replace uses of __LP64__ with CONFIG_64BIT

2.6.12-rc4-pa3 s/__LP64__/CONFIG_64BIT/ and fixup config.h usage

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Use work queue in LED/LCD driver instead of tasklet.
Grant Grundler [Sat, 22 Oct 2005 02:46:18 +0000]
[PARISC] Use work queue in LED/LCD driver instead of tasklet.

2.6.12-rc1-pa6 use work queue in LED/LCD driver instead of tasklet.

Main advantage is it allows use of msleep() in the led_LCD_driver to
"atomically" perform two MMIO writes (CMD, then DATA).
Lead to nice cleanup of the main led_work_func() and led_LCD_driver().
Kudos to David for being persistent.

From: David Pye <dmp@davidmpye.dyndns.org>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Add new ioprio_{set,get} syscalls
Jens Axboe [Sat, 22 Oct 2005 02:45:57 +0000]
[PARISC] Add new ioprio_{set,get} syscalls

add syscall entries for ioprio_set/get as per Jens Axboe.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Update bitops from parisc tree
Grant Grundler [Sat, 22 Oct 2005 02:45:22 +0000]
[PARISC] Update bitops from parisc tree

Optimize ext2_find_next_zero_bit. Gives about 25% perf improvement with a
rsync test with ext3.

Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

fix ext3 performance - ext2_find_next_zero() was culprit.
Kudos to jejb for pointing out the the possibility that ext2_test_bit
and ext2_find_next_zero() may in fact not be enumerating bits in
the bitmap because of endianess. Took sparc64 implementation and
adapted it to our tree. I suspect the real problem is ffz() wants
an unsigned long and was getting garbage in the top half of the
unsigned int. Not confirmed but that's what I suspect.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Fix find_next_bit for 32-bit
Make masking consistent for bitops

From: Joel Soete <soete.joel@tiscali.be>
Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

Add back incorrectly removed ext2_find_first_zero_bit definition

Signed-off-by: James Bottomley <jejb@parisc-linux.org>

Fixup bitops.h to use volatile for *_bit() ops

Based on this email thread:
       http://marc.theaimsgroup.com/?t=108826637900003

In a nutshell:
        *_bit() want use of volatile.
        __*_bit() are "relaxed" and don't use spinlock or volatile.

other minor changes:
o replaces hweight64() macro with alias to generic_hweight64() (Joel Soete)
o cleanup ext2* macros so (a) it's obvious what the XOR magic is about
  and (b) one version that works for both 32/64-bit.
o replace 2 uses of CONFIG_64BIT with __LP64__. bitops.h used both.
  I think header files that might go to user space should use
  something userspace will know about (__LP64__).

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Move SHIFT_PER_LONG to standard location for BITS_PER_LONG (asm/types.h)
and ditch the second definition of BITS_PER_LONG in bitops.h

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Fix parisc_setup_cache_timing to choose a better flush threshold
Stuart Brady [Sat, 22 Oct 2005 02:44:14 +0000]
[PARISC] Fix parisc_setup_cache_timing to choose a better flush threshold

update comment about CAFL_STRIDE

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Fixed a bug in parisc_setup_cache_timing() which caused it to calculate
a poor value for parisc_cache_flush_threshold.

Thanks to Joel Soete for spotting the bug.
Thanks to James Bottomley for pointing out the clean way to fix this.

Signed-off-by: Stuart Brady <sdb@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Add ability for prctl to change unaligned trap behaviour
Kyle McMartin [Sat, 22 Oct 2005 02:43:15 +0000]
[PARISC] Add ability for prctl to change unaligned trap behaviour

Add support for changing unaligned trap behaviour on a
per-thread basis.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Replace some calls to bl with b,l or bv to use longer offsets
Randolph Chung [Sat, 22 Oct 2005 02:42:57 +0000]
[PARISC] Replace some calls to bl with b,l or bv to use longer offsets

convert some bl calls to b,l or bv to use longer offsets

Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Update harmony from parisc tree
Stuart Brady [Sat, 22 Oct 2005 02:42:38 +0000]
[PARISC] Update harmony from parisc tree

o Added a control for the input source (which can be either
  "line" or "mic")

o Mute the speaker/line-out/headphone outputs by default.

o Increased the buffer size from 10 pages to 16.

Signed-off-by: Stuart Brady <sdb@parisc-linux.org>

ALSA Harmony was resetting the capture position when
preparing the capture substream, which it shouldn't do.
This should fix the problem.

Signed-off-by: Stuart Brady <sdb@parisc-linux.org>

ALSA Harmony should no longer play junk (left in the buffers
from a previous stream) at the start of a new stream.

Implement the monitor mixer channel for ALSA Harmony.

Also prevent snd_harmony_volume_get from returning negative values.

Signed-off-by: Stuart Brady <sdb@parisc-linux.org>

Use the graveyard/silence buffers in ALSA Harmony.

Signed-off-by: Stuart Brady <sdb@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Take into account nullified insn and lock functions for profiling
Randolph Chung [Sat, 22 Oct 2005 02:42:18 +0000]
[PARISC] Take into account nullified insn and lock functions for profiling

export profile_pc() symbol - oprofile needs it when built as a module.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Take into account nullified insn and lock functions for profiling

This is needed at the end of functions; it is typical that the return
branch nullifies the next insn, which is in the next function. This
causes profiling data to show up against the "wrong" function.

We also count lock times against the locker. This is consistent with
other architectures.

Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Reorganize sticore probe routine to be a little less convoluted
Matthew Wilcox [Sat, 22 Oct 2005 02:41:49 +0000]
[PARISC] Reorganize sticore probe routine to be a little less convoluted

Fix some whitespace issues
Reorganise parisc_device probe routine to be a little less convoluted
Use ->hpa.start instead of ->hpa

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Update spinlocks from parisc tree
Matthew Wilcox [Sat, 22 Oct 2005 02:41:25 +0000]
[PARISC] Update spinlocks from parisc tree

Neaten up the CONFIG_PA20 ifdefs

More merge fixes, this time for SMP

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Prettify the CONFIG_DEBUG_SPINLOCK __SPIN_LOCK_UNLOCKED initializers.

Clean up some warnings with CONFIG_DEBUG_SPINLOCK enabled.

Fix build with spinlock debugging turned on. Patch is cleaner like this,
too.

Remove mandatory 16-byte alignment requirement on PA2.0 processors by
using the ldcw,CO completer. Provides a nice insn savings.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Move pa_tlb_lock to tlb_flush.h
Grant Grundler [Sat, 22 Oct 2005 02:40:24 +0000]
[PARISC] Move pa_tlb_lock to tlb_flush.h

move pa_tlb_lock and it's primary consumers to tlb_flush.h
Future step will be to move spinlock_t definition out of system.h.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Make sure use of RFI conforms to PA 2.0 and 1.1 arch docs
Grant Grundler [Sat, 22 Oct 2005 02:40:07 +0000]
[PARISC] Make sure use of RFI conforms to PA 2.0 and 1.1 arch docs

2.6.12-rc4-pa3 : first pass at making sure use of RFI conforms to
PA 2.0 arch pages F-4 and F-5, PA 1.1 Arch page 3-19 and 3-20.

The discussion revolves around all the rules for clearing PSW Q-bit.
The hard part is meeting all the rules for "relied upon translation".

.align directive is used to guarantee the critical sequence ends more than
8 instructions (32 bytes) from the end of page.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Allow STI_CONSOLE access to some FONTS
Grant Grundler [Sat, 22 Oct 2005 02:39:43 +0000]
[PARISC] Allow STI_CONSOLE access to some FONTS

add || STI_CONSOLE to some of the basic FONTs. May need to get at
least one of them to default to "Y" for parisc.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Update dino from parisc tree
Matthew Wilcox [Sat, 22 Oct 2005 02:38:23 +0000]
[PARISC] Update dino from parisc tree

Fix card-mode Dino crashes on 725 (and probably other Snake) systems.
Dino was coming up in fatal mode after a warm reboot.  Resetting Dino
brings it out of fatal mode, so do that if the status register indicates
we're in fatal mode.  Since this was never observed on any later systems,
I presume firmware does this for us on those.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Add debug statements in the cfg_read and cfg_write functions
Fix debug statements from the IRQ overhaul last winter
Rename dino_driver_callback() to dino_probe()

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Update ccio-dma from parisc tree
Grant Grundler [Sat, 22 Oct 2005 02:37:43 +0000]
[PARISC] Update ccio-dma from parisc tree

revert use of %%sr0 in fdc asm.

Thanks to Joel Soete for pointing out this oversight.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.14-rc2-pa3 fdc/lci should be %r0 instead 0 for index (PA 1.1 compliance)
From: Joel Soete <soete.joel@tiscali.be>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Explain why we need insert_resource() instead of request_resource().

Fundementally, this is more convoluted for ccio driver because of
o legacy (HP-PB) transperant bridges.
o support for MMIO behind card-mode Dino (PCI)
o support for above bridges without ccio in the box

SBA driver doesn't have to worry about those issues.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Use insert_resource instead of request_resource now that the subdevices
will already have their resources claimed

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

re-enable use of "inline" for perf critical functions.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.12-rc4-pa5 fix sign extension of MMIO range

Fixes the problem of claiming a range that is disabled on 64-bit kernel:
ccio_init_resource() claimed CCIO bus address space (ffffffff00000000,
ffffffffffffffff)
also removes use of __FILE__.
Tested on both 32 and 64-bit systems by Joel.

From: Joel Soete <soete.joel@tiscali.be>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.12-rc1-pa7 incorrect BUG_ON in ccio

ccio-dma.c line 1317 was preventing K-class with 4GB RAM from booting.
Any ccio machine with >=2GB of RAM would have (incorrectly) triggered this.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Convert to ioremap and __raw_read/write

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Update sba_iommu from parisc tree
Grant Grundler [Sat, 22 Oct 2005 02:37:20 +0000]
[PARISC] Update sba_iommu from parisc tree

revert use of %%sr0 in fdc asm.
Thanks to Joel Soete for pointing out this oversight.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.14-rc2-pa3 move "sync" outside the main loop that fills IO Pdir.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

remove explicit use of sr0 in fdc ops.
Thanks to Joel Soete for reminding me were I added those...

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.14-rc2-pa2 - make SBA more anal about invalidating pdir entries

Previous code cleared the valid flag a pdir entry but it did NOT
guarantee this change was visible to the PDIR before writing
the PCOM register. Ie the SBA could pick up a stale entry if
the write happened to hit the SBA before the cacheline was flushed
from the cache.

Long term, I think I want to make this a compile time flag.
Developement tree should enable anal pdir checking by default
and Debian can disable it with either a CONFIG option
or one-line patch. fdc/sync options can only negatively affect
performance though I haven't measure how much yet.
If someone can run netperf TCP_RR across gige and compare
-pa1 and -pa2, that would be sufficient.

Cleaned up the use of "fdc" to make sure it's using "kernel"
space id (specify sr0 but maps to sr4-7). It seems a bit fragile
to assume "sr1" gets loaded with KERNEL_SPACE which is how the
code works today.

Tested on 32 and 64-bit SMP kernels on j6k.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

remove PDC_NARROW from SBA and document history of PDC_NARROW a bit.
It will still show up in an older kernel's .config file.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

if/ifdef cleanups from Joel Soete.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

2.6.12-rc4-pa2  fix 32-bit support for Astro platforms
o Since my last SBA code change, SBA could allocate more than 1GB of IOVA
  space on Astro boxes with more than 1GB of RAM when running 32-bit kernel.
  This is bad since IOMMU can only talk to the first 1GB at most.
  Kudos to jejb for quickly spotting that bug.

o jejb also noted SBA should *always* reject DMA masks > 32-bits since
  DMA-mapping.txt indicates caller should try again with 32-bits.

o off-by-one error when comparing the mask to IOVA space size.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Convert parisc_device to use struct resource for hpa
Matthew Wilcox [Sat, 22 Oct 2005 02:36:40 +0000]
[PARISC] Convert parisc_device to use struct resource for hpa

Convert pa_dev->hpa from an unsigned long to a struct resource.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Fix up users of ->hpa to use ->hpa.start instead.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Change the driver names so /sys/bus/parisc/drivers/ looks better
Matthew Wilcox [Sat, 22 Oct 2005 02:36:23 +0000]
[PARISC] Change the driver names so /sys/bus/parisc/drivers/ looks better

Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver
names.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PARISC] Convert parisc_device tree to use struct device klists
Matthew Wilcox [Sat, 22 Oct 2005 02:33:38 +0000]
[PARISC] Convert parisc_device tree to use struct device klists

Fix parse_tree_node.  much more needs to be done to fix this file.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Make drivers.c compile based on a patch from Pat Mochel.

From: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Fix drivers.c to create new device tree nodes when no match is found.

Signed-off-by: Richard Hirst <rhirst@parisc-linux.org>

Do a proper depth-first search returning parents before children, using the
new klist infrastructure.

Signed-off-by: Richard Hirst <rhirst@parisc-linux.org>

Fixed parisc_device traversal so that pdc_stable works again
Fixed check_dev so it doesn't dereference a parisc_device until it
has verified the bus type

Signed-off-by: Randolph Chung <tausq@parisc-linux.org>

Convert pa_dev->hpa from an unsigned long to a struct resource.
Use insert_resource() instead of request_mem_region().
Request resources at bus walk time instead of driver probe time.
Don't release the resources as we don't have any hotplug parisc_device
support yet.
Add parisc_pathname() to conveniently get the textual representation
of the hwpath used in sysfs.
Inline the remnants of claim_device() into its caller.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

I noticed that some of the STI regions weren't showing up in iomem.
Reading the STI spec indicated that all STI devices occupy at least 32MB.
So check for STI HPAs and give them 32MB instead of 4kB.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

15 years ago[PATCH] typo fix in last cpufreq powernow patch
Chris Wright [Fri, 21 Oct 2005 23:56:08 +0000]
[PATCH] typo fix in last cpufreq powernow patch

Not sure how it slipped by, but here's a trivial typo fix for powernow.

Signed-off-by: Chris Wright <chrisw@osdl.org>
[ It's "nurter" backwards.. Maybe we have a hillbilly The Shining fan? ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Call exit_itimers from do_exit, not __exit_signal
Roland McGrath [Fri, 21 Oct 2005 22:03:29 +0000]
[PATCH] Call exit_itimers from do_exit, not __exit_signal

When I originally moved exit_itimers into __exit_signal, that was the only
place where we could reliably know it was the last thread in the group
dying, without races.  Since then we've gotten the signal_struct.live
counter, and do_exit can reliably do group-wide cleanup work.

This patch moves the call to do_exit, where it's made without locks.  This
avoids the deadlock issues that the old __exit_signal code's comment talks
about, and the one that Oleg found recently with process CPU timers.

[ This replaces e03d13e985d48ac4885382c9e3b1510c78bd047f, which is why
  it was just reverted. ]

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoRevert "Fix cpu timers exit deadlock and races"
Linus Torvalds [Fri, 21 Oct 2005 22:36:00 +0000]
Revert "Fix cpu timers exit deadlock and races"

Revert commit e03d13e985d48ac4885382c9e3b1510c78bd047f, to be replaced
by a much nicer fix from Roland.

15 years ago[PATCH] cpufreq: fix pending powernow timer stuck condition
Dave Jones [Fri, 21 Oct 2005 21:21:03 +0000]
[PATCH] cpufreq: fix pending powernow timer stuck condition

AMD recently discovered that on some hardware, there is a race condition
possible when a C-state change request goes onto the bus at the same
time as a P-state change request.

Both requests happen, but the southbridge hardware only acknowledges the
C-state change.  The PowerNow! driver is then stuck in a loop, waiting
for the P-state change acknowledgement.  The driver eventually times
out, but can no longer perform P-state changes.

It turns out the solution is to resend the P-state change, which the
southbridge will acknowledge normally.

Thanks to Johannes Winkelmann for reporting this and testing the fix.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ppc64: Fix typo bug in iSeries hash code
David Gibson [Fri, 21 Oct 2005 03:41:19 +0000]
[PATCH] ppc64: Fix typo bug in iSeries hash code

This fixes a stupid typo bug in the iSeries hash table code.

When we place a hash PTE in the secondary bucket, instead of setting the
SECONDARY flag bit, as we should, we (redundantly) set the VALID flag.

This was introduced with the patch abolishing bitfields from the hash
table code.  Mea culpa, oops.  It hasn't been noticed until now because
in practice we don't hit the secondary bucket terribly often.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Fri, 21 Oct 2005 19:23:07 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

15 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/acme/net-2.6
Linus Torvalds [Fri, 21 Oct 2005 19:22:33 +0000]
Merge /pub/scm/linux/kernel/git/acme/net-2.6

15 years ago[PATCH] drm: another mga bug
Dave Airlie [Thu, 20 Oct 2005 22:49:00 +0000]
[PATCH] drm: another mga bug

The wrong state emission routines were being called for G550, and
consistent maps weren't correctly mapped...

Signed-off-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ppc64: Fix pages marked dirty abusively
Benjamin Herrenschmidt [Fri, 21 Oct 2005 04:12:51 +0000]
[PATCH] ppc64: Fix pages marked dirty abusively

While working on 64K pages, I found this little buglet in our
update_mmu_cache() implementation.

The code calls __hash_page() passing it an "access" parameter (the type
of access that triggers the hash) containing the bits _PAGE_RW and
_PAGE_USER of the linux PTE.  The latter is useless in this case and the
former is wrong.  In fact, if we have a writeable PTE and we pass
_PAGE_RW to hash_page(), it will set _PAGE_DIRTY (since we track dirty
that way, by hash faulting !dirty) which is not what we want.

In fact, the correct fix is to always pass 0. That means that only
read-only or already dirty read write PTEs will be preloaded. The
(hopefully rare) case of a non dirty read write PTE can't be preloaded
this way, it will have to fault in hash_page on the actual access.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ppc64: Fix typo in time calculations
Paul Mackerras [Fri, 21 Oct 2005 12:39:36 +0000]
[PATCH] ppc64: Fix typo in time calculations

This fixes a typo in the div128_by_32 function used in the timekeeping
calculations on ppc64.  If you look at the code it's quite obvious
that we need (rb + c) rather than (rb + b).  The "b" is clearly just a
typo.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] mptsas: fix phy identifiers
Eric Moore [Fri, 21 Oct 2005 18:56:36 +0000]
[PATCH] mptsas: fix phy identifiers

This fixes handling of the phy identifiers in mptsas.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
[ split it a pre-2.6.14 portion from Eric's bigger patch ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[ARM] Fix Integrator IM/PD-1 support
Russell King [Fri, 21 Oct 2005 09:17:37 +0000]
[ARM] Fix Integrator IM/PD-1 support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3028/1: S3C2410 - add DCLK mask definitions
Ben Dooks [Thu, 20 Oct 2005 22:21:20 +0000]
[ARM] 3028/1: S3C2410 - add DCLK mask definitions

Patch from Ben Dooks

From: Guillaume Gourat <guillaume.gourat@nexvision.fr>

Add MASK definitions for DCLK0 and DCLK1

Signed-off-by: Guillaume Gourat <guillaume.gourat@nexvision.fr>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3027/1: BAST - reduce NAND timings slightly
Ben Dooks [Thu, 20 Oct 2005 22:21:19 +0000]
[ARM] 3027/1: BAST - reduce NAND timings slightly

Patch from Ben Dooks

The current Simtec BAST nand area timings are a little
too slow to be obtained by a 2410 running at 266MHz,
so reduce the timings slightly to bring them into the
acceptable range.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3026/1: S3C2410 - avoid possible overflow in pll calculations
Ben Dooks [Thu, 20 Oct 2005 22:21:18 +0000]
[ARM] 3026/1: S3C2410 - avoid possible overflow in pll calculations

Patch from Ben Dooks

Avoid the possiblity that if the board is using
a 16.9334 or higher crystal with a high PLL
multiplier, then the pll value could overflow
the capability of an int.

Also fix the value types of the intermediate
variables to unsigned int.

Rewrite of patch from Guillaume Gourat

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3025/1: Add I2S platform device for PXA
Matt Reimer [Thu, 20 Oct 2005 22:21:18 +0000]
[ARM] 3025/1: Add I2S platform device for PXA

Patch from Matt Reimer

Adds an I2S platform_device for PXA. I2S is used to interface
with sound chips on systems like iPAQ h1910/h2200/hx4700 and
Asus 716.

Signed-off-by: mreimer@vpop.net
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[TCP] Allow len == skb->len in tcp_fragment
Herbert Xu [Thu, 20 Oct 2005 19:13:13 +0000]
[TCP] Allow len == skb->len in tcp_fragment

It is legitimate to call tcp_fragment with len == skb->len since
that is done for FIN packets and the FIN flag counts as one byte.
So we should only check for the len > skb->len case.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

15 years ago[DCCP]: Clear the IPCB area
Herbert Xu [Tue, 18 Oct 2005 02:03:28 +0000]
[DCCP]: Clear the IPCB area

Turns out the problem has nothing to do with use-after-free or double-free.
It's just that we're not clearing the CB area and DCCP unlike TCP uses a CB
format that's incompatible with IP.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

15 years ago[DCCP]: Make dccp_write_xmit always free the packet
Herbert Xu [Sun, 16 Oct 2005 11:08:46 +0000]
[DCCP]: Make dccp_write_xmit always free the packet

icmp_send doesn't use skb->sk at all so even if skb->sk has already
been freed it can't cause crash there (it would've crashed somewhere
else first, e.g., ip_queue_xmit).

I found a double-free on an skb that could explain this though.
dccp_sendmsg and dccp_write_xmit are a little confused as to what
should free the packet when something goes wrong.  Sometimes they
both go for the ball and end up in each other's way.

This patch makes dccp_write_xmit always free the packet no matter
what.  This makes sense since dccp_transmit_skb which in turn comes
from the fact that ip_queue_xmit always frees the packet.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

15 years ago[DCCP]: Use skb_set_owner_w in dccp_transmit_skb when skb->sk is NULL
Herbert Xu [Fri, 14 Oct 2005 06:38:49 +0000]
[DCCP]: Use skb_set_owner_w in dccp_transmit_skb when skb->sk is NULL

David S. Miller <davem@davemloft.net> wrote:
> One thing you can probably do for this bug is to mark data packets
> explicitly somehow, perhaps in the SKB control block DCCP already
> uses for other data.  Put some boolean in there, set it true for
> data packets.  Then change the test in dccp_transmit_skb() as
> appropriate to test the boolean flag instead of "skb_cloned(skb)".

I agree.  In fact we already have that flag, it's called skb->sk.
So here is patch to test that instead of skb_cloned().

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

15 years ago[PATCH] Fix handling spurious page fault for hugetlb region
Hugh Dickins [Thu, 20 Oct 2005 15:24:28 +0000]
[PATCH] Fix handling spurious page fault for hugetlb region

This reverts commit 3359b54c8c07338f3a863d1109b42eebccdcf379 and
replaces it with a cleaner version that is purely based on page table
operations, so that the synchronization between inode size and hugetlb
mappings becomes moot.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoLinux v2.6.14-rc5
Linus Torvalds [Thu, 20 Oct 2005 06:23:05 +0000]
Linux v2.6.14-rc5

The -rc4 release was supposed to be the last -rc, but here goes.  The
RCU fixes and the swiotlb changes need an -rc for final testing.

15 years ago[PATCH] build fix for uml/amd64
Al Viro [Tue, 18 Oct 2005 21:45:17 +0000]
[PATCH] build fix for uml/amd64

Missing half of the [PATCH] uml: Fix sysrq-r support for skas mode
We need to remove these (UPT_[DEFG]S) from the read side as well as the
write one - otherwise it simply won't build.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] scsi_error thread exits in TASK_INTERRUPTIBLE state.
Steven Rostedt [Wed, 19 Oct 2005 12:22:13 +0000]
[PATCH] scsi_error thread exits in TASK_INTERRUPTIBLE state.

Found in the -rt patch set.  The scsi_error thread likely will be in the
TASK_INTERRUPTIBLE state upon exit.  This patch fixes this bug.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ppc64: update defconfigs
Paul Mackerras [Wed, 19 Oct 2005 22:34:56 +0000]
[PATCH] ppc64: update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 20 Oct 2005 06:12:03 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

15 years ago[PATCH] swiotlb: make sure initial DMA allocations really are in DMA memory
Yasunori Goto [Wed, 19 Oct 2005 22:52:18 +0000]
[PATCH] swiotlb: make sure initial DMA allocations really are in DMA memory

This introduces a limit parameter to the core bootmem allocator; The new
parameter indicates that physical memory allocated by the bootmem
allocator should be within the requested limit.

We also introduce alloc_bootmem_low_pages_limit, alloc_bootmem_node_limit,
alloc_bootmem_low_pages_node_limit apis, but alloc_bootmem_low_pages_limit
is the only api used for swiotlb.

The existing alloc_bootmem_low_pages() api could instead have been
changed and made to pass right limit to the core allocator.  But that
would make the patch more intrusive for 2.6.14, as other arches use
alloc_bootmem_low_pages().  We may be done that post 2.6.14 as a
cleanup.

With this, swiotlb gets memory within 4G for both x86_64 and ia64
arches.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Ravikiran G Thirumalai <kiran@scalex86.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] `unaligned access' in acpi get_root_bridge_busnr()
Peter Chubb [Thu, 20 Oct 2005 05:45:14 +0000]
[PATCH] `unaligned access' in acpi get_root_bridge_busnr()

In drivers/acpi/glue.c the address of an integer is cast to the address of
an unsigned long.  This breaks on systems where a long is larger than an
int --- for a start the int can be misaligned; for a second the assignment
through the pointer will overwrite part of the next variable.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Acked-by: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] fix MGA DRM regression before 2.6.14
Dave Airlie [Thu, 20 Oct 2005 04:23:51 +0000]
[PATCH] fix MGA DRM regression before 2.6.14

I've gotten a report on lkml, of a possible regression in the MGA DRM in
2.6.14-rc4 (since -rc1), I haven't been able to reproduce it here, but I've
figured out some possible issues in the mga code that were definitely
wrong, some of these are from DRM CVS, the main fix is the agp enable bit
on the old code path still used by everyone.....

Signed-off-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Threads shouldn't inherit PF_NOFREEZE
Alan Stern [Thu, 20 Oct 2005 04:23:51 +0000]
[PATCH] Threads shouldn't inherit PF_NOFREEZE

The PF_NOFREEZE process flag should not be inherited when a thread is
forked.  This patch (as585) removes the flag from the child.

This problem is starting to show up more and more as drivers turn to the
kthread API instead of using kernel_thread().  As a result, their kernel
threads are now children of the kthread worker instead of modprobe, and
they inherit the PF_NOFREEZE flag.  This can cause problems during system
suspend; the kernel threads are not getting frozen as they ought to be.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Export RCS_TAR_IGNORE for rpm targets
Tom Rini [Thu, 20 Oct 2005 04:23:49 +0000]
[PATCH] Export RCS_TAR_IGNORE for rpm targets

The variable RCS_TAR_IGNORE is used in scripts/packaging/Makefile, but not
exported from the main Makefile, so it's never used.

This results in the rpm targets being very unhappy in quilted trees.

Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ppc64: Fix error in vDSO 32 bits date
Benjamin Herrenschmidt [Thu, 20 Oct 2005 04:23:49 +0000]
[PATCH] ppc64: Fix error in vDSO 32 bits date

The implementation of __kernel_gettimeofday() in the 32 bits vDSO has a
small bug (a typo actually) that will cause it to lose 1 bit of precision.
Not terribly bad but worth fixing.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Three one-liners in md.c
NeilBrown [Thu, 20 Oct 2005 04:23:47 +0000]
[PATCH] Three one-liners in md.c

The main problem fixes is that in certain situations stopping md arrays may
take longer than you expect, or may require multiple attempts.  This would
only happen when resync/recovery is happening.

This patch fixes three vaguely related bugs.

1/ The recent change to use kthreads got the setting of the
   process name wrong.  This fixes it.
2/ The recent change to use kthreads lost the ability for
   md threads to be signalled with SIG_KILL.  This restores that.
3/ There is a long standing bug in that if:
    - An array needs recovery (onto a hot-spare) and
    - The recovery is being blocked because some other array being
       recovered shares a physical device and
    - The recovery thread is killed with SIG_KILL
   Then the recovery will appear to have completed with no IO being
   done, which can cause data corruption.
   This patch makes sure that incomplete recovery will be treated as
   incomplete.

Note that any kernel affected by bug 2 will not suffer the problem of bug
3, as the signal can never be delivered.  Thus the current 2.6.14-rc
kernels are not susceptible to data corruption.  Note also that if arrays
are shutdown (with "mdadm -S" or "raidstop") then the problem doesn't
occur.  It only happens if a SIGKILL is independently delivered as done by
'init' when shutting down.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] raw1394: fix locking in the presence of SMP and interrupts
Andy Wingo [Thu, 20 Oct 2005 04:23:46 +0000]
[PATCH] raw1394: fix locking in the presence of SMP and interrupts

Changes all spinlocks that can be held during an irq handler to disable
interrupts while the lock is held.  Changes spin_[un]lock_irq to use the
irqsave/irqrestore variants for robustness and readability.

In raw1394.c:handle_iso_listen(), don't grab host_info_lock at all -- we're
not accessing host_info_list or host_count, and holding this lock while
trying to tasklet_kill the iso tasklet this can cause an ABBA deadlock if
ohci:dma_rcv_tasklet is running and tries to grab host_info_lock in
raw1394.c:receive_iso.  Test program attached reliably deadlocks all SMP
machines I have been able to test without this patch.

Signed-off-by: Andy Wingo <wingo@pobox.com>
Acked-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] orinoco: limit message rate
Andrew Morton [Thu, 20 Oct 2005 04:23:44 +0000]
[PATCH] orinoco: limit message rate

Brice Goglin <Brice.Goglin@ens-lyon.org> reports a printk storm from this
driver.  Fix.

Acked-by: David Gibson <hermes@gibson.dropbear.id.au>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] mm: hugetlb truncation fixes
Hugh Dickins [Thu, 20 Oct 2005 04:23:43 +0000]
[PATCH] mm: hugetlb truncation fixes

hugetlbfs allows truncation of its files (should it?), but hugetlb.c often
forgets that: crashes and misaccounting ensue.

copy_hugetlb_page_range better grab the src page_table_lock since we don't
want to guess what happens if concurrently truncated.  unmap_hugepage_range
rss accounting must not assume the full range was mapped.  follow_hugetlb_page
must guard with page_table_lock and be prepared to exit early.

Restyle copy_hugetlb_page_range with a for loop like the others there.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Fix cpu timers exit deadlock and races
Roland McGrath [Thu, 20 Oct 2005 05:21:23 +0000]
[PATCH] Fix cpu timers exit deadlock and races

Oleg Nesterov reported an SMP deadlock.  If there is a running timer
tracking a different process's CPU time clock when the process owning
the timer exits, we deadlock on tasklist_lock in posix_cpu_timer_del via
exit_itimers.

That code was using tasklist_lock to check for a race with __exit_signal
being called on the timer-target task and clearing its ->signal.
However, there is actually no such race.  __exit_signal will have called
posix_cpu_timers_exit and posix_cpu_timers_exit_group before it does
that.  Those will clear those k_itimer's association with the dying
task, so posix_cpu_timer_del will return early and never reach the code
in question.

In addition, posix_cpu_timer_del called from exit_itimers during execve
or directly from timer_delete in the process owning the timer can race
with an exiting timer-target task to cause a double put on timer-target
task struct.  Make sure we always access cpu_timers lists with sighand
lock held.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[ARM] 3024/1: Add cpu_v6_proc_fin
Tony Lindgren [Wed, 19 Oct 2005 22:00:56 +0000]
[ARM] 3024/1: Add cpu_v6_proc_fin

Patch from Tony Lindgren

Machine restart calls cpu_proc_fin() to clean and disable
cache, and turn off interrupts. This patch adds proper
cpu_v6_proc_fin.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] Handle spurious page fault for hugetlb region
Seth, Rohit [Tue, 18 Oct 2005 21:15:12 +0000]
[PATCH] Handle spurious page fault for hugetlb region

The hugetlb pages are currently pre-faulted.  At the time of mmap of
hugepages, we populate the new PTEs.  It is possible that HW has already
cached some of the unused PTEs internally.  These stale entries never
get a chance to be purged in existing control flow.

This patch extends the check in page fault code for hugepages.  Check if
a faulted address falls with in size for the hugetlb file backing it.
We return VM_FAULT_MINOR for these cases (assuming that the arch
specific page-faulting code purges the stale entry for the archs that
need it).

Signed-off-by: Rohit Seth <rohit.seth@intel.com>

[ This is apparently arguably an ia64 port bug. But the code won't
  hurt, and for now it fixes a real problem on some ia64 machines ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[ARM] 3023/1: pxa-regs: Typo in ARM pxa register definitions.
Paul Schulz [Tue, 18 Oct 2005 18:40:32 +0000]
[ARM] 3023/1: pxa-regs: Typo in ARM pxa register definitions.

Patch from Paul Schulz

The following trivial patch is to fix what looks like a typo in the PXA register
definitions. The correction comes directly from the definition in the
Intel Documentation.

 http://www.intel.com/design/pca/applicationsprocessors/manuals/278693.htm
 Intel(R) PXA 255 Processor - Developers Manual - Jan 2004 - Page 12-33

Neither 'UDCCS_IO_ROF' or 'UDCCS_IO_DME' are currently used elseware
in the main code (from grep of tree)... The current definitions have been
in the code since at lease 2.4.7.

Signed-off-by: Paul Schulz <paul@mawsonlakes.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] vesafb: Fix display corruption on display blank
Antonino A. Daplas [Tue, 18 Oct 2005 07:59:52 +0000]
[PATCH] vesafb: Fix display corruption on display blank

Reported by: Bob Tracy <rct@gherkin.frus.com>

 "...I've got a Toshiba notebook (730XCDT -- Pentium 150MMX) for which
  I'm using the Vesa FB driver.  When the machine has been idle for some
  time and the driver attempts to powerdown the display, rather than the
  display going blank, it goes gray with several strange lines.  When I
  hit the "shift" key or other-wise wake up the display, the old video
  state is not fully restored..."

vesafb recently added a blank method which has only 2 states, powerup and
powerdown.  The powerdown state is used for all blanking levels, but in his
case, powerdown does not work correctly for higher levels of display
powersaving. Thus, for intermediate power levels, use software blanking,
and use only hardware blanking for an explicit powerdown.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 18 Oct 2005 15:41:06 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Tue, 18 Oct 2005 15:40:46 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

15 years agoAdd some basic .gitignore files
Linus Torvalds [Tue, 18 Oct 2005 15:26:15 +0000]
Add some basic .gitignore files

This still leaves driver and architecture-specific subdirectories alone,
but gets rid of the bulk of the "generic" generated files that we should
ignore.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[ARM] 3021/1: Interrupt 0 bug fix for ixp4xx
Kenneth Tan [Tue, 18 Oct 2005 06:53:35 +0000]
[ARM] 3021/1: Interrupt 0 bug fix for ixp4xx

Patch from Kenneth Tan

The get_irqnr_and_base subroutine of ixp4xx does not take interrupt 0 condition into account properly. We should not perform "subs" here. The Z flag will be set when interrupt 0 occur, which resulting "movne r1, sp" in the caller routine (irq_handler) not being executed.

When interrupt 0 occur:
o if CONFIG_CPU_IXP46X is not set, "subs" will set the Z flag and return
o if CONFIG_CPU_IXP46X is set, codes in upper interrupt handling will be trigerred. But since this is not supper interrupt, the "cmp" in the upper interrupt handling portion will set the Z flag and return

Signed-off-by: Kenneth Tan <chong.yin.tan@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3020/1: Fixes typo error CONFIG_CPU_IXP465, which should be CONFIG_CPU_IXP46X
Kenneth Tan [Tue, 18 Oct 2005 06:51:35 +0000]
[ARM] 3020/1: Fixes typo error CONFIG_CPU_IXP465, which should be CONFIG_CPU_IXP46X

Patch from Kenneth Tan

The cpu_is_ixp465 macro in include/asm-arm/arch-ixp4xx/hardware.h is always returning 0 because #ifdef CONFIG_CPU_IXP465 is always false.

Signed-off-by: Kenneth Tan <chong.yin.tan@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3019/1: fix wrong comments
Nicolas Pitre [Tue, 18 Oct 2005 06:51:34 +0000]
[ARM] 3019/1: fix wrong comments

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3018/1: S3C2410 - check de-referenced device is really a platform device
Ben Dooks [Tue, 18 Oct 2005 06:51:34 +0000]
[ARM] 3018/1: S3C2410 - check de-referenced device is really a platform device

Patch from Ben Dooks

Check that the device we are looking at is really
a platform device before trying to cast it to one
to find out the platform bus number.

Thanks to RMK for pointing this out.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] kbuild: Eliminate build error when KALLSYMS not defined
Mark Rustad [Mon, 17 Oct 2005 23:43:34 +0000]
[PATCH] kbuild: Eliminate build error when KALLSYMS not defined

The following build error happens with 2.6.14-rc4 when CONFIG_KALLSYMS is
not defined.  The error message in a fragment of the output was:

CC arch/i386/lib/usercopy.o
  AR      arch/i386/lib/lib.a
/bin/sh: line 1: +@: command not found
make[3]: warning: jobserver unavailable: using -j1.  Add `+' to parent make rule.
  CHK     include/linux/compile.h

Signed-off-by: Mark Rustad <mrustad@mac.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] aio: revert lock_kiocb()
Zach Brown [Mon, 17 Oct 2005 23:43:33 +0000]
[PATCH] aio: revert lock_kiocb()

lock_kiocb() was introduced to serialize retrying and cancellation.  In the
process of doing so it tried to sleep waiting for KIF_LOCKED while holding
the ctx_lock spinlock.  Recent fixes have ensured that multiple concurrent
retries won't be attempted for a given iocb.  Cancel has other problems and
has no significant in-tree users that have been complaining about it.  So
for the immediate future we'll revert sleeping with the lock held and will
address proper cancellation and retry serialization in the future.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] uniput - fix crash on SMP
Dmitry Torokhov [Mon, 17 Oct 2005 23:43:32 +0000]
[PATCH] uniput - fix crash on SMP

Only signal completion after marking request slot as free, otherwise other
processor can free request structure before we finish using it.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Fix /proc/acpi/events around suspend
Pavel Machek [Mon, 17 Oct 2005 23:43:31 +0000]
[PATCH] Fix /proc/acpi/events around suspend

Fix -EIO on /proc/acpi/events after suspends.  This actually breaks
suspending by power button in many setups.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] n_r3964 mod_timer() fix
Stephan Brodkorb [Mon, 17 Oct 2005 23:43:30 +0000]
[PATCH] n_r3964 mod_timer() fix

Since Revision 1.10 was released the n_r3964 module wasn't able to receive any
data.  The reason for that behavior is because there were some wrong calls of
mod_timer(...) in the function receive_char (...).  This patch should fix this
problem and was successfully tested with talking to some kuka industrial
robots.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] output of /proc/maps on nommu systems is incomplete
David McCullough [Mon, 17 Oct 2005 23:43:29 +0000]
[PATCH] output of /proc/maps on nommu systems is incomplete

Currently you do not get all the map entries on nommu systems because the
start function doesn't index into the list using the value of "pos".

Signed-off-by: David McCullough <davidm@snapgear.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] rcu: keep rcu callback event counter
Eric Dumazet [Mon, 17 Oct 2005 18:01:21 +0000]
[PATCH] rcu: keep rcu callback event counter

This makes call_rcu() keep track of how many events there are on the RCU
list, and cause a reschedule event when the list gets too long.

This helps keep RCU event lists down.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Fix and clean up quirk_intel_ide_combined() configuration
Jeff Garzik [Mon, 17 Oct 2005 17:01:57 +0000]
[PATCH] Fix and clean up quirk_intel_ide_combined() configuration

This change makes quirk_intel_ide_combined() dependent on the precise
conditions under which it is needed:

* IDE is built in
* IDE SATA option is not set
* ata_piix or ahci drivers are enabled

This fixes an issue where some modular configurations would not cause
the quirk to be enabled.

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus torvalds <torvalds@osdl.org>