Dick Hollenbeck [Wed, 9 Dec 2009 20:31:34 +0000 (12:31 -0800)]
serial: 8250: add serial transmitter fully empty test
When controlling an industrial radio modem it can be necessary to
manipulate the handshake lines in order to control the radio modem's
transmitter, from userspace.
The transmitter should not be turned off before all characters have been
transmitted. serial8250_tx_empty() was reporting that all characters were
transmitted before they actually were.
===
Discovered in parallel with more testing and analysis by Kees Schoenmakers
as follows:
I ran into an NetMos 9835 serial pci board which behaves a little
different than the standard. This type of expansion board is very common.
"Standard" 8250 compatible devices clear the 'UART_LST_TEMT" bit together
with the "UART_LSR_THRE" bit when writing data to the device.
The NetMos device does it slightly different
I believe that the TEMT bit is coupled to the shift register. The problem
is that after writing data to the device and very quickly after that one
does call serial8250_tx_empty, it returns the wrong information.
My patch makes the test more robust (and solves the problem) and it does
not affect the already correct devices.
Alan:
We may yet need to quirk this but now we know which chips we have a
way to do that should we find this breaks some other 8250 clone with
dodgy THRE.
Signed-off-by: Dick Hollenbeck <dick@softplc.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Kees Schoenmakers <k.schoenmakers@sigmae.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
net neigh: Decouple per interface neighbour table controls from binary sysctls
Stop computing the number of neighbour table settings we have by
counting the number of binary sysctls. This behaviour was silly
and meant that we could not add another neighbour table setting
without also adding another binary sysctl.
Don't pass the binary sysctl path for neighour table entries
into neigh_sysctl_register. These parameters are no longer
used and so are just dead code.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers
Stop using the binary sysctl enumeartion in sysctl.h as an index into
a per interface array. This leads to unnecessary binary sysctl number
allocation, and a fragility in data structure and implementation
because of unnecessary coupling.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sysfs: sysfs_sd_setattr set iattrs unconditionally
There is currently a bug in sysfs_sd_setattr inherited from
sysfs_setattr in 2.6.32 where the first time we set the attributes
on a sysfs file we allocate backing store but do not set the
backing store attributes. Resulting in overly restrictive
permissions on sysfs files.
The fix is to simply modify the code so that it always executes
when we update the sysfs attributes, as we did in 2.6.31 and earlier.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Jean Delvare <khali@linux-fr.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David S. Miller [Tue, 16 Feb 2010 23:23:23 +0000 (15:23 -0800)]
sparc64: Kill bogus ip_tables.h include.
Fixes the following build failure:
CC arch/sparc/kernel/sys_sparc32.o
In file included from include/linux/netfilter_ipv4/ip_tables.h:28,
from arch/sparc/kernel/sys_sparc32.c:46:
include/linux/netfilter/x_tables.h:525: error: expected declaration specifiers or ‘...’ before ‘nf_hookfn’
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unnecessary code that works around older versions of ethtool
that can pass down invalid advertisement speed values. This old
code prevents the user from specifying multiple advertisement values.
The new code uses simple masking to mask out invalid advertisment bits.
Reported-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 15 Feb 2010 19:42:07 +0000 (19:42 +0000)]
bnx2: Check BNX2_FLAG_USING_MSIX flag when setting up MSIX.
Checking the flag is more correct than checking bp->irq_nvecs. By
accident it is not a problem because we always have more than 1
vectors when using MSIX mode.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Brian Niebuhr [Mon, 25 Jan 2010 20:45:40 +0000 (14:45 -0600)]
USB: gadget: fix EEM gadget CRC usage
eem_wrap() is sending a sentinel CRC, but it didn't indicate that to
the host, it should zero bit 14 (bmCRC) in the EEM packet header,
instead of setting it.
Also remove a redundant crc calculation in eem_unwrap().
Signed-off-by: Steve Longerbeam <stevel@netspectrum.com> Acked-by: Brian Niebuhr <bniebuhr@efjohnson.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: otg Kconfig: let USB_OTG_UTILS select USB_ULPI option
With CONFIG_USB_ULPI=y, CONFIG_USB<=m, CONFIG_PCI=n and
CONFIG_USB_OTG_UTILS=n, which is the default used for mx31moboard,
the build for all mx3 platforms fails because drivers/usb/otg/ulpi.c
where otg_ulpi_create is defined is not compiled.
Build error:
arch/arm/mach-mx3/built-in.o: In function `mxc_board_init':
kzmarm11.c:(.init.text+0x73c): undefined reference to `otg_ulpi_create'
kzmarm11.c:(.init.text+0x1020): undefined reference to `otg_ulpi_create'
This isn't a strong dependency as drivers/usb/otg/ulpi.c doesn't
use functions defined in drivers/usb/otg/otg.o and is only needed
to get ulpi.o linked into the kernel image.
g_multi used CONFIG_USB_ETH_RNDIS to check if RNDIS option was requested
where it should check for CONFIG_USB_G_MULTI_RNDIS. As a result, RNDIS
was never present in g_multi regardless of configuration.
Anton Vorontsov [Wed, 27 Jan 2010 14:09:36 +0000 (17:09 +0300)]
USB: FHCI: Fix build after kfifo rework
After kfifo rework FHCI fails to build:
CC drivers/usb/host/fhci-tds.o
drivers/usb/host/fhci-tds.c: In function 'fhci_ep0_free':
drivers/usb/host/fhci-tds.c:108: error: used struct type value where scalar is required
drivers/usb/host/fhci-tds.c:118: error: used struct type value where scalar is required
drivers/usb/host/fhci-tds.c:128: error: used struct type value where scalar is required
This is because kfifos are no longer pointers in the ep struct.
So, instead of checking the pointers, we should now check if kfifo
is initialized.
Anton Vorontsov [Wed, 27 Jan 2010 14:09:34 +0000 (17:09 +0300)]
kfifo: Make kfifo_initialized work after kfifo_free
After kfifo rework it's no longer possible to reliably know if kfifo is
usable, since after kfifo_free(), kfifo_initialized() would still return
true. The correct behaviour is needed for at least FHCI USB driver.
This patch fixes the issue by resetting the kfifo to zero values (the
same approach is used in kfifo_alloc() if allocation failed).
Richard Farina [Wed, 20 Jan 2010 21:42:33 +0000 (16:42 -0500)]
USB: serial: add usbid for dell wwan card to sierra.c
This patch adds support for Dell Computer Corp. Wireless 5720 VZW Mobile
Broadband (EVDO Rev-A) Minicard GPS Port. I stole the name from lsusb,
but my card does not have a GPS on it (at least not that I can make
function). I'm sure the patch is whitespace damaged but the one line
addition should be fairly straightforward nonetheless.
Tested-by: Rick Farina <sidhayn@gmail.com> Signed-off-by: Rick Farina <sidhayn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB gadget controller drivers normally export their driver registration
function, allowing modular builds of the individual gadget drivers so
do so for s3c-hsotg, fixing builds.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Brown [Mon, 18 Jan 2010 12:03:18 +0000 (12:03 +0000)]
USB: r8a66597-udc: Prototype IS_ERR() and PTR_ERR()
The build of r8a66597-udc was failing on ARM since IS_ERR() and
PTR_ERR() weren't protyped. Presumably err.h is being pulled in by
another header on other platforms.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andreas Mohr [Sun, 17 Jan 2010 10:45:38 +0000 (11:45 +0100)]
USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT)
- add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT
- add hopefully helpful new_id comment
- remove less helpful "Due to many user requests for multiple ELV devices we enable
them by default." comment (we simply add _all_ known devices - an
enduser shouldn't have to fiddle with obscure module parameters...).
- add myself to DRIVER_AUTHOR
The missing NXTCam ID has been found at
http://www.unixboard.de/vb3/showthread.php?t=44155
, ELV devices taken from ELV Windows .inf file.
Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Radek Liboska [Wed, 27 Jan 2010 14:38:34 +0000 (15:38 +0100)]
USB: ftdi_sio: new device id for papouch AD4USB
added new device pid (PAPOUCH_AD4USB_PID) to ftdi_sio.h and ftdi_sio.c
AD4USB measuring converter is a 4-input A/D converter which enables the
user to measure to four current inputs ranging from 0(4) to 20 mA or
voltage between 0 and 10 V. The measured values are then transferred to
a superior system in digital form. The AD4USB communicates via USB.
Powered is also via USB. datasheet in english is here:
http://www.papouch.com/shop/scripts/pdf/ad4usb_en.pdf
Linus Torvalds [Tue, 16 Feb 2010 20:35:07 +0000 (12:35 -0800)]
USB: usbfs: properly clean up the as structure on error paths
I notice that the processcompl_compat() function seems to be leaking the
'struct async *as' in the error paths.
I think that the calling convention is fundamentally buggered. The
caller is the one that did the "reap_as()" to get the as thing, the
caller should be the one to free it too.
Freeing it in the caller also means that it very clearly always gets
freed, and avoids the need for any "free in the error case too".
From: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Marcus Meissner <meissner@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alexey Dobriyan [Tue, 16 Feb 2010 07:57:44 +0000 (07:57 +0000)]
gre: fix netns vs proto registration ordering
GRE protocol receive hook can be called right after protocol addition is done.
If netns stuff is not yet initialized, we're going to oops in
net_generic().
This is remotely oopsable if ip_gre is compiled as module and packet
comes at unfortunate moment of module loading.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Tue, 16 Feb 2010 00:18:46 +0000 (00:18 +0000)]
be2net: set proper value to version field in req hdr
Before sending a command to the ASIC, set version properly.
This is necessary for the ARM firmware to send correct data to the driver.
This also fixes a bug in certain skews of the ASIC where the statistics
are misreported.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Mon, 15 Feb 2010 20:00:51 +0000 (20:00 +0000)]
xfrm: Fix xfrm_state_clone leak
xfrm_state_clone calls kfree instead of xfrm_state_put to free
a failed state. Depending on the state of the failed state, it
can cause leaks to things like module references.
All states should be freed by xfrm_state_put past the point of
xfrm_init_state.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Mon, 15 Feb 2010 19:24:30 +0000 (19:24 +0000)]
ipcomp: Avoid duplicate calls to ipcomp_destroy
When ipcomp_tunnel_attach fails we will call ipcomp_destroy twice.
This may lead to double-frees on certain structures.
As there is no reason to explicitly call ipcomp_destroy, this patch
removes it from ipcomp*.c and lets the standard xfrm_state destruction
take place.
This is based on the discovery and patch by Alexey Dobriyan.
Tested-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
dm: sysfs revert add empty release function to avoid debug warning
dm mpath: fix stall when requeueing io
dm raid1: fix null pointer dereference in suspend
dm raid1: fail writes if errors are not handled and log fails
dm log: userspace fix overhead_size calcuations
dm snapshot: persistent annotate work_queue as on stack
dm stripe: avoid divide by zero with invalid stripe count
Kiyoshi Ueda [Tue, 16 Feb 2010 18:43:01 +0000 (18:43 +0000)]
dm mpath: fix stall when requeueing io
This patch fixes the problem that system may stall if target's ->map_rq
returns DM_MAPIO_REQUEUE in map_request().
E.g. stall happens on 1 CPU box when a dm-mpath device with queue_if_no_path
bounces between all-paths-down and paths-up on I/O load.
When target's ->map_rq returns DM_MAPIO_REQUEUE, map_request() requeues
the request and returns to dm_request_fn(). Then, dm_request_fn()
doesn't exit the I/O dispatching loop and continues processing
the requeued request again.
This map and requeue loop can be done with interrupt disabled,
so 1 CPU system can be stalled if this situation happens.
For example, commands below can stall my 1 CPU box within 1 minute or so:
# dmsetup table mp
mp: 0 2097152 multipath 1 queue_if_no_path 0 1 1 service-time 0 1 2 8:144 1 1
# while true; do dd if=/dev/mapper/mp of=/dev/null bs=1M count=100; done &
# while true; do \
> dmsetup message mp 0 "fail_path 8:144" \
> dmsetup suspend --noflush mp \
> dmsetup resume mp \
> dmsetup message mp 0 "reinstate_path 8:144" \
> done
To fix the problem above, this patch changes dm_request_fn() to exit
the I/O dispatching loop once if a request is requeued in map_request().
Takahiro Yasui [Tue, 16 Feb 2010 18:42:58 +0000 (18:42 +0000)]
dm raid1: fix null pointer dereference in suspend
When suspending a failed mirror, bios are completed by mirror_end_io() and
__rh_lookup() in dm_rh_dec() returns NULL where a non-NULL return value is
required by design. Fix this by not changing the state of the recovery failed
region from DM_RH_RECOVERING to DM_RH_NOSYNC in dm_rh_recovery_end().
Issue
On 2.6.33-rc1 kernel, I hit the bug when I suspended the failed
mirror by dmsetup command.
When recovery process of a region failed, dm_rh_recovery_end() function
changes the state of the region from RM_RH_RECOVERING to DM_RH_NOSYNC.
When recovery_complete() is executed between dm_rh_update_states() and
dm_writes() in do_mirror(), bios are processed with the region state,
DM_RH_NOSYNC. However, the region data is freed without checking its
pending count when dm_rh_update_states() is called next time.
When bios are finished by mirror_end_io(), __rh_lookup() in dm_rh_dec()
returns NULL even though a valid return value are expected.
Solution
Remove the state change of the recovery failed region from DM_RH_RECOVERING
to DM_RH_NOSYNC in dm_rh_recovery_end(). We can remove the state change
because:
- If the region data has been released by dm_rh_update_states(),
a new region data is created with the state of DM_RH_NOSYNC, and
bios are processed according to the DM_RH_NOSYNC state.
- If the region data has not been released by dm_rh_update_states(),
a state of the region is DM_RH_RECOVERING and bios are put in the
delayed_bio list.
The flag change from DM_RH_RECOVERING to DM_RH_NOSYNC in dm_rh_recovery_end()
was added in the following commit:
dm raid1: handle resync failures
author Jonathan Brassow <jbrassow@redhat.com>
Thu, 12 Jul 2007 16:29:04 +0000 (17:29 +0100)
http://git.kernel.org/linus/f44db678edcc6f4c2779ac43f63f0b9dfa28b724
Mikulas Patocka [Tue, 16 Feb 2010 18:42:55 +0000 (18:42 +0000)]
dm raid1: fail writes if errors are not handled and log fails
If the mirror log fails when the handle_errors option was not selected
and there is no remaining valid mirror leg, writes return success even
though they weren't actually written to any device. This patch
completes them with EIO instead.
This code path is taken:
do_writes:
bio_list_merge(&ms->failures, &sync);
do_failures:
if (!get_valid_mirror(ms)) (false)
else if (errors_handled(ms)) (false)
else bio_endio(bio, 0);
The logic in do_failures is based on presuming that the write was already
tried: if it succeeded at least on one leg (without handle_errors) it
is reported as success.
Jonathan Brassow [Tue, 16 Feb 2010 18:42:53 +0000 (18:42 +0000)]
dm log: userspace fix overhead_size calcuations
This patch fixes two bugs that revolve around the miscalculation and
misuse of the variable 'overhead_size'. 'overhead_size' is the size of
the various header structures used during communication.
The first bug is the use of 'sizeof' with the pointer of a structure
instead of the structure itself - resulting in the wrong size being
computed. This is then used in a check to see if the payload
(data_size) would be to large for the preallocated structure. Since the
bug produces a smaller value for the overhead, it was possible for the
structure to be breached. (Although the current users of the code do
not currently send enough data to trigger this bug.)
The second bug is that the 'overhead_size' value is used to compute how
much of the preallocated space should be cleared before populating it
with fresh data. This should have simply been 'sizeof(struct cn_msg)'
not overhead_size. The fact that 'overhead_size' was computed
incorrectly made this problem "less bad" - leaving only a pointer's
worth of space at the end uncleared. Thus, this bug was never producing
a bad result, but still needs to be fixed - especially now that the
value is computed correctly.
Cc: stable@kernel.org Signed-off-by: Jonathan Brassow <jbrassow@redhat.com Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Tue, 16 Feb 2010 18:42:51 +0000 (18:42 +0000)]
dm snapshot: persistent annotate work_queue as on stack
chunk_io() declares its 'struct mdata_req' on the stack and then
initializes its 'struct work_struct' member. Annotate the
initialization of this workqueue with INIT_WORK_ON_STACK to suppress a
debugobjects warning seen when CONFIG_DEBUG_OBJECTS_WORK is enabled.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Don Skidmore [Thu, 11 Feb 2010 04:14:08 +0000 (04:14 +0000)]
ixgbe: fix WOL register setup for 82599
We need to have the WUS register set to all 1's in order for the hardware
to be capable of ever waking up. Set it here in the ixgbe_probe().
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Don Skidmore [Thu, 11 Feb 2010 04:13:49 +0000 (04:13 +0000)]
ixgbe: Fix - Do not allow Rx FC on 82598 at 1G due to errata
The 82598 has an erratum that receipt of pause frames at 1G
could lead to a Tx Hang. To avoid this this patch disables
Rx FC while at 1G speed for all 82598 parts.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sadanand Mutyala <Sadanand.Mutyala@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
To see the effect make sure you have an empty SPD.
On window1 "ip xfrm mon" and on window2 issue "ip xfrm policy flush"
You get prompt back in window1 and you see the flush event on window2.
With this fix, you still get prompt on window1 but no event on window2.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
jamal [Wed, 10 Feb 2010 23:51:27 +0000 (23:51 +0000)]
xfrm: Flushing empty SAD generates false events
To see the effect make sure you have an empty SAD.
-On window1 "ip xfrm mon"
-on window2 issue "ip xfrm state flush"
You get prompt back in window1
and you see the flush event on window2.
With this fix, you still get prompt on window1 but no
event on window2.
I was tempted to return -ESRCH on window1 (which would
show "RTNETLINK answers: No such process") but didnt want
to change current behavior.
To see the effect make sure you have an empty SAD.
On window1 "ip xfrm mon" and on window2 issue "ip xfrm state flush"
You get prompt back in window1 and you see the flush event on window2.
With this fix, you still get prompt on window1 but no event on window2.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
Shan Wei [Thu, 11 Feb 2010 00:12:45 +0000 (00:12 +0000)]
IPv6: Delete redundant counter of IPSTATS_MIB_REASMFAILS
When no more memory can be allocated, fq_find() will return NULL and
increase the value of IPSTATS_MIB_REASMFAILS. In this case,
ipv6_frag_rcv() also increase the value of IPSTATS_MIB_REASMFAILS.
So, the patch deletes redundant counter of IPSTATS_MIB_REASMFAILS in fq_find().
and deletes the unused parameter of idev.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 11 Feb 2010 05:55:39 +0000 (05:55 +0000)]
net/macvtap: fix reference counting
The RCU usage in the original code was broken because
there are cases where we possibly sleep with rcu_read_lock
held. As a fix, change the macvtap_file_get_queue to
get a reference on the socket and the netdev instead of
taking the full rcu_read_lock.
Also, change macvtap_file_get_queue failure case to
not require a subsequent macvtap_file_put_queue, as
pointed out by Ed Swierk.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Ed Swierk <eswierk@aristanetworks.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Divy Le Ray [Sat, 13 Feb 2010 09:44:35 +0000 (09:44 +0000)]
cxgb3: fix link flap
The driver is expected to report that the link is up
when the phy Rx signal is established and the mac
has not detected a link fault.
The code is however broken, the driver does not check the link fault
status when the phy link status changes.
The link fault status being checked within a short period of time,
it leads to link up/link down events.
Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Divy Le Ray [Sat, 13 Feb 2010 09:44:30 +0000 (09:44 +0000)]
cxgb3: FIx VLAN over Jumbo frames
The mac is expected to auto-inflate the Maximum Frame size for VLAN
tagged frames. It however does not work with jumbo frames.
Work around the bug adding 4 to the Maximum Frame for MTUs
greater than 1536.
Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Waskiewicz [Fri, 12 Feb 2010 13:48:44 +0000 (13:48 +0000)]
ixgbe: Cleanup incorrect header comments
The recent n-tuple patches added some comments to the headers
of the Flow Director functions that aren't accurate. This
cleans them up, and is a purely cosmetic patch.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Waskiewicz [Fri, 12 Feb 2010 13:48:25 +0000 (13:48 +0000)]
ethtool: Move n-tuple capability check into set_flags
set_flags should check if the underlying device supports
n-tuple filter programming before setting the device flags
on the netdevice.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Waskiewicz [Fri, 12 Feb 2010 13:48:05 +0000 (13:48 +0000)]
ethtool: Fix filter addition when caching n-tuple filters
We can allow a filter to be added successfully to the underlying
hardware, but still return an error if the cached list memory
allocation fails. This patch fixes that condition.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 16 Feb 2010 03:54:54 +0000 (19:54 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: ohci: retransmit isochronous transmit packets on cycle loss
firewire: net: fix panic in fwnet_write_complete
Chuck Lever [Mon, 15 Feb 2010 17:19:53 +0000 (12:19 -0500)]
NFS: Too many GETATTR and ACCESS calls after direct I/O
The cached read and write paths initialize fattr->time_start in their
setup procedures. The value of fattr->time_start is propagated to
read_cache_jiffies by nfs_update_inode(). Subsequent calls to
nfs_attribute_timeout() will then use a good time stamp when
computing the attribute cache timeout, and squelch unneeded GETATTR
calls.
Since the direct I/O paths erroneously leave the inode's
fattr->time_start field set to zero, read_cache_jiffies for that inode
is set to zero after any direct read or write operation. This
triggers an otw GETATTR or ACCESS call to update the file's attribute
and access caches properly, even when the NFS READ or WRITE replies
have usable post-op attributes.
Make sure the direct read and write setup code performs the same fattr
initialization as the cached I/O paths to prevent unnecessary GETATTR
calls.
This was likely introduced by commit 0e574af1 in 2.6.15, which appears
to add new nfs_fattr_init() call sites in the cached read and write
paths, but not in the equivalent places in fs/nfs/direct.c. A
subsequent commit in the same series, 33801147, introduces the
fattr->time_start field.
Interestingly, the direct write reschedule path already has a call to
nfs_fattr_init() in the right place.
Linus Torvalds [Tue, 16 Feb 2010 03:51:15 +0000 (19:51 -0800)]
Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: make sure retry count increases.
drm/radeon/kms/atom: use get_unaligned_le32() for ctx->ps
drm/ttm: Fix a bug occuring when validating a buffer object in a range.
drm: Fix a bug in the range manager.
Linus Torvalds [Tue, 16 Feb 2010 03:47:48 +0000 (19:47 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf top: Fix help text alignment
perf: Fix hypervisor sample reporting
perf: Make bp_len type to u64 generic across the arch
Florian Westphal [Mon, 15 Feb 2010 17:17:10 +0000 (18:17 +0100)]
netfilter: CONFIG_COMPAT: allow delta to exceed 32767
with 32 bit userland and 64 bit kernels, it is unlikely but possible
that insertion of new rules fails even tough there are only about 2000
iptables rules.
This happens because the compat delta is using a short int.
Easily reproducible via "iptables -m limit" ; after about 2050
rules inserting new ones fails with -ELOOP.
Note that compat_delta included 2 bytes of padding on x86_64, so
structure size remains the same.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
Florian Westphal [Mon, 15 Feb 2010 17:16:26 +0000 (18:16 +0100)]
netfilter: ebtables: avoid explicit XT_ALIGN() in match/targets
This will cause trouble once CONFIG_COMPAT support is added to ebtables.
xt_compat_*_offset() calculate the kernel/userland structure size delta
using:
XT_ALIGN(size) - COMPAT_XT_ALIGN(size)
If the match/target sizes are aligned at registration time,
delta is always zero.
Should have zero effect for existing systems: xtables uses
XT_ALIGN() whenever it deals with match/target sizes.
Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
Florian Westphal [Mon, 15 Feb 2010 17:15:55 +0000 (18:15 +0100)]
netfilter: ebtables: abort if next_offset is too small
next_offset must be > 0, otherwise this loops forever.
The offset also contains the size of the ebt_entry structure
itself, so anything smaller is invalid.
Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
Patrick McHardy [Mon, 15 Feb 2010 17:13:33 +0000 (18:13 +0100)]
netfilter: nf_conntrack: add support for "conntrack zones"
Normally, each connection needs a unique identity. Conntrack zones allow
to specify a numerical zone using the CT target, connections in different
zones can use the same identity.
Example:
iptables -t raw -A PREROUTING -i veth0 -j CT --zone 1
iptables -t raw -A OUTPUT -o veth1 -j CT --zone 1
Takashi Iwai [Mon, 15 Feb 2010 16:05:28 +0000 (17:05 +0100)]
ALSA: hda - Correct ASUA blacklist for MSI brokenness
The MSI blacklist entry for ASUS mobo added in the commit 8ce28d6abff34886d3797b25324c940471b99164 was based on the alsa-info
output wrongly posted. Fix the id to the right one now.
Jan Engelhardt [Mon, 15 Feb 2010 15:31:35 +0000 (16:31 +0100)]
netfilter: xt_recent: inform user when hitcount is too large
It is one of these things that iptables cannot catch and which can
cause "Invalid argument" to be printed. Without a hint in dmesg, it is
not going to be helpful.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
which is definitely not correct, introduced a warning (reported
by Stephen Rothwell):
net/mac80211/iface.c: In function 'ieee80211_stop':
net/mac80211/iface.c:416: warning: passing argument 4 of '__dev_addr_unsync' makes pointer from integer without a cast
include/linux/netdevice.h:1967: note: expected 'int *' but argument is of type 'int'
and is thus reverted here.
Signed-off-by: David S. Miller <davem@davemloft.net>
vhost-net only uses memory barriers to control SMP effects
(communication with userspace potentially running on a different CPU),
so it should use SMP barriers and not mandatory barriers for memory
access ordering, as suggested by Documentation/memory-barriers.txt
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 15 Feb 2010 06:40:39 +0000 (22:40 -0800)]
niu: Use pr_<level>, netdev_<level> and netif_<level> macros
Remove #define PFX
Add pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert printks to pr_<level>
Convert printks without levels to pr_cont
Convert pr_<level> with np->dev to netdev_<level>
Convert dev_<level> to netdev_<level>
Convert niudbg to netif_printk
Convert niuinfo, niuwarn macros to netif_<level>(priv, type, dev...
Coalesce long formats
Convert embedded function names to "%s", __func__
Always use "%s()..." when __func__ is printed
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>