12 years agomemcg: handle swap caches
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:56 +0000]
memcg: handle swap caches

SwapCache support for memory resource controller (memcg)

Before mem+swap controller, memcg itself should handle SwapCache in proper
way.  This is cut-out from it.

In current memcg, SwapCache is just leaked and the user can create tons of
SwapCache.  This is a leak of account and should be handled.

SwapCache accounting is done as following.

  charge (anon)
- charged when it's mapped.
  (because of readahead, charge at add_to_swap_cache() is not sane)
  uncharge (anon)
- uncharged when it's dropped from swapcache and fully unmapped.
  means it's not uncharged at unmap.
  Note: delete from swap cache at swap-in is done after rmap information
        is established.
  charge (shmem)
- charged at swap-in. this prevents charge at add_to_page_cache().

  uncharge (shmem)
- uncharged when it's dropped from swapcache and not on shmem's
  radix-tree.

  at migration, check against 'old page' is modified to handle shmem.

Comparing to the old version discussed (and caused troubles), we have
advantages of
  - PCG_USED bit.
  - simple migrating handling.

So, situation is much easier than several months ago, maybe.

[hugh@veritas.com: memcg: handle swap caches build fix]
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemcg: new force_empty to free pages under group
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:55 +0000]
memcg: new force_empty to free pages under group

By memcg-move-all-accounts-to-parent-at-rmdir.patch, there is no leak of
memory usage and force_empty is removed.

This patch adds "force_empty" again, in reasonable manner.

memory.force_empty file works when

  #echo 0 (or some) > memory.force_empty
  and have following function.

  1. only works when there are no task in this cgroup.
  2. free all page under this cgroup as much as possible.
  3. page which cannot be freed will be moved up to parent.
  4. Then, memcg will be empty after above echo returns.

This is much better behavior than old "force_empty" which just forget
all accounts. This patch also check signal_pending() and above "echo"
can be stopped by "Ctrl-C".

[akpm@linux-foundation.org: cleanup]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemcg: reduce size of mem_cgroup by using nr_cpu_ids
Jan Blunck [Thu, 8 Jan 2009 02:07:53 +0000]
memcg: reduce size of mem_cgroup by using nr_cpu_ids

As Jan Blunck <jblunck@suse.de> pointed out, allocating per-cpu stat for
memcg to the size of NR_CPUS is not good.

This patch changes mem_cgroup's cpustat allocation not based on NR_CPUS
but based on nr_cpu_ids.

Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemcg: move all acccounting to parent at rmdir()
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:53 +0000]
memcg: move all acccounting to parent at rmdir()

This patch provides a function to move account information of a page
between mem_cgroups and rewrite force_empty to make use of this.

This moving of page_cgroup is done under
 - lru_lock of source/destination mem_cgroup is held.
 - lock_page_cgroup() is held.

Then, a routine which touches pc->mem_cgroup without lock_page_cgroup()
should confirm pc->mem_cgroup is still valid or not.  Typical code can be
following.

(while page is not under lock_page())
mem = pc->mem_cgroup;
mz = page_cgroup_zoneinfo(pc)
spin_lock_irqsave(&mz->lru_lock);
if (pc->mem_cgroup == mem)
...../* some list handling */
spin_unlock_irqrestore(&mz->lru_lock);

Of course, better way is
lock_page_cgroup(pc);
....
unlock_page_cgroup(pc);

But you should confirm the nest of lock and avoid deadlock.

If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock,
you don't have to worry about what pc->mem_cgroup points to.
moved pages are added to head of lru, not to tail.

Expected users of this routine is:
  - force_empty (rmdir)
  - moving tasks between cgroup (for moving account information.)
  - hierarchy (maybe useful.)

force_empty(rmdir) uses this move_account and move pages to its parent.
This "move" will not cause OOM (I added "oom" parameter to try_charge().)

If the parent is busy (not enough memory), force_empty calls try_to_free_page()
and reduce usage.

Purpose of this behavior is
  - Fix "forget all" behavior of force_empty and avoid leak of accounting.
  - By "moving first, free if necessary", keep pages on memory as much as
    possible.

Adding a switch to change behavior of force_empty to
  - free first, move if necessary
  - free all, if there is mlocked/busy pages, return -EBUSY.
is under consideration. (I'll add if someone requtests.)

This patch also removes memory.force_empty file, a brutal debug-only interface.

Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemcg: do not recalculate section unnecessarily in init_section_page_cgroup
Fernando Luis Vazquez Cao [Thu, 8 Jan 2009 02:07:51 +0000]
memcg: do not recalculate section unnecessarily in init_section_page_cgroup

In init_section_page_cgroup() the section a given pfn belongs to is
calculated at the top of the function and, despite the fact that the
pfn/section correspondence does not change, it is recalculated further
down the same function.  By computing this just once and reusing that
value we save some bytes in the object file and do not waste CPU cycles.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemcg: simple migration handling
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:50 +0000]
memcg: simple migration handling

Now, management of "charge" under page migration is done under following
manner. (Assume migrate page contents from oldpage to newpage)

 before
  - "newpage" is charged before migration.
 at success.
  - "oldpage" is uncharged at somewhere(unmap, radix-tree-replace)
 at failure
  - "newpage" is uncharged.
  - "oldpage" is charged if necessary (*1)

But (*1) is not reliable....because of GFP_ATOMIC.

This patch tries to change behavior as following by charge/commit/cancel ops.

 before
  - charge PAGE_SIZE (no target page)
 success
  - commit charge against "newpage".
 failure
  - commit charge against "oldpage".
    (PCG_USED bit works effectively to avoid double-counting)
  - if "oldpage" is obsolete, cancel charge of PAGE_SIZE.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemcg: fix gfp_mask of callers of charge
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:49 +0000]
memcg: fix gfp_mask of callers of charge

Fix misuse of gfp_kernel.

Now, most of callers of mem_cgroup_charge_xxx functions uses GFP_KERNEL.

I think that this is from the fact that page_cgroup *was* dynamically
allocated.

But now, we allocate all page_cgroup at boot.  And
mem_cgroup_try_to_free_pages() reclaim memory from GFP_HIGHUSER_MOVABLE +
specified GFP_RECLAIM_MASK.

  * This is because we just want to reduce memory usage.
    "Where we should reclaim from ?" is not a problem in memcg.

This patch modifies gfp masks to be GFP_HIGUSER_MOVABLE if possible.

Note: This patch is not for fixing behavior but for showing sane information
      in source code.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemcg: introduce charge-commit-cancel style of functions
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:48 +0000]
memcg: introduce charge-commit-cancel style of functions

There is a small race in do_swap_page().  When the page swapped-in is
charged, the mapcount can be greater than 0.  But, at the same time some
process (shares it ) call unmap and make mapcount 1->0 and the page is
uncharged.

      CPUA  CPUB
       mapcount == 1.
   (1) charge if mapcount==0     zap_pte_range()
                                (2) mapcount 1 => 0.
        (3) uncharge(). (success)
   (4) set page's rmap()
       mapcount 0=>1

Then, this swap page's account is leaked.

For fixing this, I added a new interface.
  - charge
   account to res_counter by PAGE_SIZE and try to free pages if necessary.
  - commit
   register page_cgroup and add to LRU if necessary.
  - cancel
   uncharge PAGE_SIZE because of do_swap_page failure.

     CPUA
  (1) charge (always)
  (2) set page's rmap (mapcount > 0)
  (3) commit charge was necessary or not after set_pte().

This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting.
Usual mem_cgroup_charge_common() does charge -> commit at a time.

And this patch also adds following function to clarify all charges.

  - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge()
called against newly allocated anon pages.

  - mem_cgroup_charge_migrate_fixup()
        called only from remove_migration_ptes().
we'll have to rewrite this later.(this patch just keeps old behavior)
This function will be removed by additional patch to make migration
clearer.

Good for clarifying "what we do"

Then, we have 4 following charge points.
  - newpage
  - swap-in
  - add-to-cache.
  - migration.

[akpm@linux-foundation.org: add missing inline directives to stubs]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodevices cgroup: allow mkfifo
Serge E. Hallyn [Thu, 8 Jan 2009 02:07:46 +0000]
devices cgroup: allow mkfifo

The devcgroup_inode_permission() hook in the devices whitelist cgroup has
always bypassed access checks on fifos.  But the mknod hook did not.  The
devices whitelist is only about block and char devices, and fifos can't
even be added to the whitelist, so fifos can't be created at all except by
tasks which have 'a' in their whitelist (meaning they have access to all
devices).

Fix the behavior by bypassing access checks to mkfifo.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: James Morris <jmorris@namei.org>
Reported-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Cc: <stable@kernel.org> [2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodevcgroup: use list_for_each_entry_rcu()
Lai Jiangshan [Thu, 8 Jan 2009 02:07:45 +0000]
devcgroup: use list_for_each_entry_rcu()

We should use list_for_each_entry_rcu in RCU read site.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: make cgroup_path() RCU-safe
Paul Menage [Thu, 8 Jan 2009 02:07:44 +0000]
cgroups: make cgroup_path() RCU-safe

Fix races between /proc/sched_debug by freeing cgroup objects via an RCU
callback.  Thus any cgroup reference obtained from an RCU-safe source will
remain valid during the RCU section.  Since dentries are also RCU-safe,
this allows us to traverse up the tree safely.

Additionally, make cgroup_path() check for a NULL cgrp->dentry to avoid
trying to report a path for a partially-created cgroup.

[lizf@cn.fujitsu.com: call deactive_super() in cgroup_diput()]
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: skip processes from other namespaces when listing a cgroup
Gowrishankar M [Thu, 8 Jan 2009 02:07:43 +0000]
cgroups: skip processes from other namespaces when listing a cgroup

Once tasks are populated from system namespace inside cgroup, container
replaces other namespace task with 0 while listing tasks, inside
container.

Though this is expected behaviour from container end, there is no use of
showing unwanted 0s.

In this patch, we check if a process is in same namespace before loading
into pid array.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Gowrishankar M <gowrishankar.m@in.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: introduce link_css_set() to remove duplicate code
Li Zefan [Thu, 8 Jan 2009 02:07:42 +0000]
cgroups: introduce link_css_set() to remove duplicate code

Add a common function link_css_set() to link a css_set to a cgroup.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: add inactive subsystems to rootnode.subsys_list
Li Zefan [Thu, 8 Jan 2009 02:07:42 +0000]
cgroups: add inactive subsystems to rootnode.subsys_list

Though for an inactive hierarchy, we have subsys->root == &rootnode, but
rootnode's subsys_list is always empty.

This conflicts with the code in find_css_set():

for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
...
if (ss->root->subsys_list.next == &ss->sibling) {
...
}
}
if (list_empty(&rootnode.subsys_list)) {
...
}

The above code assumes rootnode.subsys_list links all inactive
hierarchies.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: make root_list contains active hierarchies only
Li Zefan [Thu, 8 Jan 2009 02:07:41 +0000]
cgroups: make root_list contains active hierarchies only

Don't link rootnode to the root list, so root_list contains active
hierarchies only as the comment indicates.  And rename for_each_root() to
for_each_active_root().

Also remove redundant check in cgroup_kill_sb().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: remove rcu_read_lock() in cgroupstats_build()
Lai Jiangshan [Thu, 8 Jan 2009 02:07:40 +0000]
cgroups: remove rcu_read_lock() in cgroupstats_build()

cgroup_iter_* do not need rcu_read_lock().

In cgroup_enable_task_cg_lists(), do_each_thread() and while_each_thread()
are protected by RCU, it's OK, for write_lock(&css_set_lock) implies
rcu_read_lock() in non-RT kernel.

If we need explicit rcu_read_lock(), we should add rcu_read_lock() in
cgroup_enable_task_cg_lists(), not cgroup_iter_*.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: call find_css_set() safely in cgroup_attach_task()
Lai Jiangshan [Thu, 8 Jan 2009 02:07:39 +0000]
cgroups: call find_css_set() safely in cgroup_attach_task()

In cgroup_attach_task(), tsk maybe exit when we call find_css_set().  and
find_css_set() will access to invalid css_set.

This patch increases the count before get_css_set(), and decreases it
after find_css_set().

NOTE:

css_set's refcount is also taskcount, after this patch applied, taskcount
may be off-by-one WHEN cgroup_lock() is not held.  but I reviewed other
code which use taskcount, they are still correct.  No regression found by
reviewing and simply testing.

So I do not use two counters in css_set.  (one counter for taskcount, the
other for refcount.  like struct mm_struct) If this fix cause regression,
we will use two counters in css_set.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: use task_lock() for access tsk->cgroups safe in cgroup_clone()
Lai Jiangshan [Thu, 8 Jan 2009 02:07:38 +0000]
cgroups: use task_lock() for access tsk->cgroups safe in cgroup_clone()

Use task_lock() protect tsk->cgroups and get_css_set(tsk->cgroups).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: don't put struct cgroupfs_root protected by RCU
Lai Jiangshan [Thu, 8 Jan 2009 02:07:37 +0000]
cgroups: don't put struct cgroupfs_root protected by RCU

We don't access struct cgroupfs_root in fast path, so we should not put
struct cgroupfs_root protected by RCU

But the comment in struct cgroup_subsys.root confuse us.

struct cgroup_subsys.root is used in these places:

1 find_css_set(): if (ss->root->subsys_list.next == &ss->sibling)
2 rebind_subsystems(): if (ss->root != &rootnode)
                       rcu_assign_pointer(ss->root, root);
                       rcu_assign_pointer(subsys[i]->root, &rootnode);
3 cgroup_has_css_refs(): if (ss->root != cgrp->root)
4 cgroup_init_subsys(): ss->root = &rootnode;
5 proc_cgroupstats_show(): ss->name, ss->root->subsys_bits,
                           ss->root->number_of_cgroups, !ss->disabled);
6 cgroup_clone(): root = subsys->root;
                  if ((root != subsys->root) ||

All these place we have held cgroup_lock() or we don't dereference to
struct cgroupfs_root.  It's means wo don't need RCU when use struct
cgroup_subsys.root, and we should not put struct cgroupfs_root protected
by RCU.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: fix cgroup_iter_next() bug
Lai Jiangshan [Thu, 8 Jan 2009 02:07:36 +0000]
cgroups: fix cgroup_iter_next() bug

We access res->cgroups without the task_lock(), so res->cgroups may be
changed.  it's unreliable, and "if (l == &res->cgroups->tasks)" may be
false forever.

We don't need add any lock for fixing this bug.  we just access to struct
css_set by struct cg_cgroup_link, not by struct task_struct.

Since we hold css_set_lock, struct cg_cgroup_link is reliable.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: add lock for child->cgroups in cgroup_post_fork()
Lai Jiangshan [Thu, 8 Jan 2009 02:07:36 +0000]
cgroups: add lock for child->cgroups in cgroup_post_fork()

When cgroup_post_fork() is called, child is seen by find_task_by_vpid(),
so child->cgroups maybe be changed, It'll incorrect.

child->cgroups<old>'s refcnt is decreased
child->cgroups<new>'s refcnt is increased
but child->cg_list is added to child->cgroups<old>'s list.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemcg: fix a typo in Kconfig
Li Zefan [Thu, 8 Jan 2009 02:07:35 +0000]
memcg: fix a typo in Kconfig

s/contoller/controller/

Signed-of-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agons_cgroup: remove unused spinlock
Li Zefan [Thu, 8 Jan 2009 02:07:34 +0000]
ns_cgroup: remove unused spinlock

I happened to find the spinlock in struct ns_cgroup is never used.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: remove some redundant NULL checks
Li Zefan [Thu, 8 Jan 2009 02:07:33 +0000]
cgroups: remove some redundant NULL checks

- In cgroup_clone(), if vfs_mkdir() returns successfully,
  dentry->d_fsdata will be the pointer to the newly created
  cgroup and won't be NULL.

- a cgroup file's dentry->d_fsdata won't be NULL, guaranteed
  by cgroup_add_file().

- When walking through the subsystems of a cgroup_fs (using
  for_each_subsys), cgrp->subsys[ss->subsys_id] won't be NULL,
  guaranteed by cgroup_create().

(Also remove 2 unused variables in cgroup_rmdir().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: documentation updates
Li Zefan [Thu, 8 Jan 2009 02:07:32 +0000]
cgroups: documentation updates

- remove 'releasable' since it has been moved to the debug subsys.
- update lock requirements of subsys callbacks.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: make cgroup config a submenu
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:30 +0000]
cgroups: make cgroup config a submenu

Making CGROUP related configs be a sub-menu.

This patch make CGROUP related configs be a sub-menu and makes 1st level
configs of "General Setup" shorter.

 including following additional changes
  - add help comment about CGROUPS and GROUP_SCHED.
  - moved MM_OWNER config to the bottom.
    (for good indent in menuconfig)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoquota: don't set grace time when user isn't above softlimit
Jan Kara [Thu, 8 Jan 2009 02:07:29 +0000]
quota: don't set grace time when user isn't above softlimit

do_set_dqblk() allowed SETDQBLK quotactl to set user's grace time even if
user was not above his softlimit.  This does not make much sence and by
coincidence causes quota code to omit softlimit warning when user really
exceeds softlimit.  This patch makes do_set_dqblk() reset user's grace
time if he has not exceeded softlimit.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocoda: fix fs/coda/sysctl.c build warnings when !CONFIG_SYSCTL
Richard A. Holden III [Thu, 8 Jan 2009 02:07:28 +0000]
coda: fix fs/coda/sysctl.c build warnings when !CONFIG_SYSCTL

Fix
fs/coda/sysctl.c:14: warning: 'fs_table_header' defined but not used
fs/coda/sysctl.c:44: warning: 'fs_table' defined but not used

these are only used when CONFIG_SYSCTL is defined.

Signed-off-by: Richard A. Holden III <aciddeath@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agojbd: remove excess kernel-doc notation
Randy Dunlap [Thu, 8 Jan 2009 02:07:27 +0000]
jbd: remove excess kernel-doc notation

Remove excess kernel-doc from fs/jbd/transaction.c:

Warning(linux-2.6.28-git5//fs/jbd/transaction.c:764): Excess function parameter 'credits' description in 'journal_get_write_access'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoext3: tighten restrictions on inode flags
Duane Griffin [Thu, 8 Jan 2009 02:07:26 +0000]
ext3: tighten restrictions on inode flags

At the moment there are few restrictions on which flags may be set on
which inodes.  Specifically DIRSYNC may only be set on directories and
IMMUTABLE and APPEND may not be set on links.  Tighten that to disallow
TOPDIR being set on non-directories and only NODUMP and NOATIME to be set
on non-regular file, non-directories.

Introduces a flags masking function which masks flags based on mode and
use it during inode creation and when flags are set via the ioctl to
facilitate future consistency.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoext3: don't inherit inappropriate inode flags from parent
Duane Griffin [Thu, 8 Jan 2009 02:07:26 +0000]
ext3: don't inherit inappropriate inode flags from parent

At present INDEX is the only flag that new ext3 inodes do NOT inherit from
their parent.  In addition prevent the flags DIRTY, ECOMPR, IMAGIC and
TOPDIR from being inherited.  List inheritable flags explicitly to prevent
future flags from accidentally being inherited.

This fixes the TOPDIR flag inheritance bug reported at
http://bugzilla.kernel.org/show_bug.cgi?id=9866.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoext3: allocate ->s_blockgroup_lock separately
Pekka Enberg [Thu, 8 Jan 2009 02:07:25 +0000]
ext3: allocate ->s_blockgroup_lock separately

As spotted by kmemtrace, struct ext3_sb_info is 17152 bytes on 64-bit
which makes it a very bad fit for SLAB allocators.  The culprit of the
wasted memory is ->s_blockgroup_lock which can be as big as 16 KB when
NR_CPUS >= 32.

To fix that, allocate ->s_blockgroup_lock, which fits nicely in a order 2
page in the worst case, separately.  This shinks down struct ext3_sb_info
enough to fit a 1 KB slab cache so now we allocate 16 KB + 1 KB instead of
32 KB saving 15 KB of memory.

Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agojbd: improve fsync batching
Josef Bacik [Thu, 8 Jan 2009 02:07:24 +0000]
jbd: improve fsync batching

There is a flaw with the way jbd handles fsync batching.  If we fsync() a
file and we were not the last person to run fsync() on this fs then we
automatically sleep for 1 jiffie in order to wait for new writers to join
into the transaction before forcing the commit.  The problem with this is
that with really fast storage (ie a Clariion) the time it takes to commit
a transaction to disk is way faster than 1 jiffie in most cases, so
sleeping means waiting longer with nothing to do than if we just committed
the transaction and kept going.  Ric Wheeler noticed this when using
fs_mark with more than 1 thread, the throughput would plummet as he added
more threads.

This patch attempts to fix this problem by recording the average time in
nanoseconds that it takes to commit a transaction to disk, and what time
we started the transaction.  If we run an fsync() and we have been running
for less time than it takes to commit the transaction to disk, we sleep
for the delta amount of time and then commit to disk.  We acheive
sub-jiffie sleeping using schedule_hrtimeout.  This means that the wait
time is auto-tuned to the speed of the underlying disk, instead of having
this static timeout.  I weighted the average according to somebody's
comments (Andreas Dilger I think) in order to help normalize random
outliers where we take way longer or way less time to commit than the
average.  I also have a min() check in there to make sure we don't sleep
longer than a jiffie in case our storage is super slow, this was requested
by Andrew.

I unfortunately do not have access to a Clariion, so I had to use a
ramdisk to represent a super fast array.  I tested with a SATA drive with
barrier=1 to make sure there was no regression with local disks, I tested
with a 4 way multipathed Apple Xserve RAID array and of course the
ramdisk.  I ran the following command

fs_mark -d /mnt/ext3-test -s 4096 -n 2000 -D 64 -t $i

where $i was 2, 4, 8, 16 and 32.  I mkfs'ed the fs each time.  Here are my
results

type threads with patch without patch
sata 2 24.6 26.3
sata 4 49.2 48.1
sata 8 70.1 67.0
sata 16 104.0 94.1
sata 32 153.6 142.7

xserve 2 246.4 222.0
xserve 4 480.0 440.8
xserve 8 829.5 730.8
xserve 16 1172.7 1026.9
xserve 32 1816.3 1650.5

ramdisk 2 2538.3 1745.6
ramdisk 4 2942.3 661.9
ramdisk 8 2882.5 999.8
ramdisk 16 2738.7 1801.9
ramdisk 32 2541.9 2394.0

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ric Wheeler <rwheeler@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoext2: tighten restrictions on inode flags
Duane Griffin [Thu, 8 Jan 2009 02:07:21 +0000]
ext2: tighten restrictions on inode flags

At the moment there are few restrictions on which flags may be set on
which inodes.  Specifically DIRSYNC may only be set on directories and
IMMUTABLE and APPEND may not be set on links.  Tighten that to disallow
TOPDIR being set on non-directories and only NODUMP and NOATIME to be set
on non-regular file, non-directories.

Introduces a flags masking function which masks flags based on mode and
use it during inode creation and when flags are set via the ioctl to
facilitate future consistency.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoext2: don't inherit inappropriate inode flags from parent
Duane Griffin [Thu, 8 Jan 2009 02:07:20 +0000]
ext2: don't inherit inappropriate inode flags from parent

At present BTREE/INDEX is the only flag that new ext2 inodes do NOT
inherit from their parent.  In addition prevent the flags DIRTY, ECOMPR,
INDEX, IMAGIC and TOPDIR from being inherited.  List inheritable flags
explicitly to prevent future flags from accidentally being inherited.

This fixes the TOPDIR flag inheritance bug reported at
http://bugzilla.kernel.org/show_bug.cgi?id=9866.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoext2: allocate ->s_blockgroup_lock separately
Pekka J Enberg [Thu, 8 Jan 2009 02:07:19 +0000]
ext2: allocate ->s_blockgroup_lock separately

As spotted by kmemtrace, struct ext2_sb_info is 17024 bytes on 64-bit
which makes it a very bad fit for SLAB allocators.  The culprit of the
wasted memory is ->s_blockgroup_lock which can be as big as 16 KB when
NR_CPUS >= 32.

To fix that, allocate ->s_blockgroup_lock, which fits nicely in a order 2
page in the worst case, separately.  This shinks down struct ext2_sb_info
enough to fit a 1 KB slab cache so now we allocate 16 KB + 1 KB instead of
32 KB saving 15 KB of memory.

Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoext2: fix ext2_splice_branch() comments
Qinghuang Feng [Thu, 8 Jan 2009 02:07:18 +0000]
ext2: fix ext2_splice_branch() comments

There is no argument named @chain in ext2_splice_branch, remove references
to it.

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agortc-ds1307: remove legacy probe() checks
Jüri Reitel [Thu, 8 Jan 2009 02:07:16 +0000]
rtc-ds1307: remove legacy probe() checks

Remove RTC register value checks from the rtc-ds1307 probe() function.
They were left over from the legacy style I2C driver, which had to defend
against finding a non-RTC chip when the driver was probed.

Also fix a minor glitch in the alarm support: DS1307 chips don't have
alarms, so name those methods after one of the chips which actually *do*
have alarms (DS1337).

Signed-off-by: Jüri Reitel <juri.reitel@liewenthal.ee>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sebastien Barre <sbarre@sdelcc.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agortc-ds1307: SMBus compatibility
BARRE Sebastien [Thu, 8 Jan 2009 02:07:13 +0000]
rtc-ds1307: SMBus compatibility

Change i2c access functions to SMBus access functions in order to use the
ds1307 with SMBus adapter.

Signed-off-by: Sebastien Barre <sbarre@sdelcc.com>
Acked-by: David Brownell <david-b@pacbell.net>
Tested-by: David Brownell <david-b@pacbell.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Tested-by: Sebastien Barre <sbarre@sdelcc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoxen: add xenfs to allow usermode <-> Xen interaction
Alex Zeffertt [Thu, 8 Jan 2009 02:07:11 +0000]
xen: add xenfs to allow usermode <-> Xen interaction

The xenfs filesystem exports various interfaces to usermode.  Initially
this exports a file to allow usermode to interact with xenbus/xenstore.

Traditionally this appeared in /proc/xen.  Rather than extending procfs,
this patch adds a backward-compat mountpoint on /proc/xen, and provides
a xenfs filesystem which can be mounted there.

Signed-off-by: Alex Zeffertt <alex.zeffertt@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodrivers/xen/xenbus/xenbus_client.c: cleanup kerneldoc
Qinghuang Feng [Thu, 8 Jan 2009 02:07:10 +0000]
drivers/xen/xenbus/xenbus_client.c: cleanup kerneldoc

no argument named @xbt in xenbus_switch_state(), remove it.

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoasync: Don't call async_synchronize_full_special() while holding sb_lock
Dave Kleikamp [Thu, 8 Jan 2009 15:46:31 +0000]
async: Don't call async_synchronize_full_special() while holding sb_lock

sync_filesystems() shouldn't be calling async_synchronize_full_special
while holding a spinlock.  The second while loop in that function is the
right place for this anyway.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Reported-by: Grissiom <chaos.proton@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Thu, 8 Jan 2009 01:23:53 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Work around branch tracer warning.
  sparc64: Fix unsigned long long warnings in drivers.
  sparc64: Use unsigned long long for u64.
  sparc: refactor code in fault_32.c
  sparc64: refactor code in init_64.c
  sparc64: refactor code in viohs.c
  sparc: make proces_ver_nack a bit more readable

12 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Thu, 8 Jan 2009 01:22:04 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (10191a): Update MAINTAINERS entries on media drivers
  V4L/DVB (10190): cx88: Fix some Kbuild troubles
  V4L/DVB (10189): dm1105: Fix build with INPUT=m and DVB_DM1105=y
  V4L/DVB (10185): Use negated usb_endpoint_xfer_control, etc
  V4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization
  V4L/DVB (10181): v4l2-device: Fix some sparse warnings
  V4L/DVB (10180): drivers/media: Fix a number of sparse warnings
  V4L/DVB (10179): tda8290: Fix two sparse warnings
  V4L/DVB (10178): dvb_frontend: Fix some sparse warnings due to static symbols
  V4L/DVB (10177): Fix sparse warnings on em28xx
  V4L/DVB (10176b): pxa-camera: fix redefinition warnings and missing DMA definitions
  V4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage

12 years agoMerge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Thu, 8 Jan 2009 01:21:24 +0000]
Merge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: (67 commits)
  nfsd: get rid of NFSD_VERSION
  nfsd: last_byte_offset
  nfsd: delete wrong file comment from nfsd/nfs4xdr.c
  nfsd: git rid of nfs4_cb_null_ops declaration
  nfsd: dprint each op status in nfsd4_proc_compound
  nfsd: add etoosmall to nfserrno
  NFSD: FIDs need to take precedence over UUIDs
  SUNRPC: The sunrpc server code should not be used by out-of-tree modules
  svc: Clean up deferred requests on transport destruction
  nfsd: fix double-locks of directory mutex
  svc: Move kfree of deferral record to common code
  CRED: Fix NFSD regression
  NLM: Clean up flow of control in make_socks() function
  NLM: Refactor make_socks() function
  nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT
  SUNRPC: Ensure the server closes sockets in a timely fashion
  NFSD: Add documenting comments for nfsctl interface
  NFSD: Replace open-coded integer with macro
  NFSD: Fix a handful of coding style issues in write_filehandle()
  NFSD: clean up failover sysctl function naming
  ...

12 years agosparc64: Work around branch tracer warning.
David S. Miller [Thu, 8 Jan 2009 01:15:57 +0000]
sparc64: Work around branch tracer warning.

As reported by Sam Ravnborg, Gcc-3.4.5 does not handle:

if (get_user() || get_user())

with the new branch tracer enabled.

Just seperate it out into seperate statements for now
so people can get work done.

Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoV4L/DVB (10191a): Update MAINTAINERS entries on media drivers
Mauro Carvalho Chehab [Fri, 2 Jan 2009 14:27:44 +0000]
V4L/DVB (10191a): Update MAINTAINERS entries on media drivers

This patch updates the MAINTAINERS entries for the media drivers.

We are doing a few changes during 2009 to improve patch handling for
drivers/media stuff.

Currently, v4l-dvb-maintainer list at linuxtv.org were used to to be v4l/dvb
driver maintainers ML, in order to keep track of patch merge requests and to
receive bug fixes. This list allows posting for everybody, but, in order to
avoid spam, the user subscribe/unsubscribe at the ML is moderated. Other
development discussions and end-user forums happened on two separated ML (one
for V4L and another for DVB).

At the beginning of 2009, we've created linux-media@vger.kernel.org, meaning to
be the main upstream development mailing list for drivers/media, including V4L
and DVB core and drivers.

The choice for vger.kernel.org were due to the fact that most of upstream lists
are there. Also, its anti-spam filtering rules are better than what we
currently have at linuxtv.org.

For now, both video4linux-list and linux-dvb ML will remain active, but more
focused on end users. It is expected that those lists will gradually be
replaced also by linux-media@vger.kernel.org.

This patch reflect those changes at linux MAINTAINERS file.

Since the development and bug fix discussions will now happen at
linux-media@vger.kernel.org, this patch does the following changes

- replaces v4l-dvb-maintainer ML for the new
  linux-media@vger.kernel.org;

- replaces video4linux ML for the new linux-media@vger.kernel.org;

While here, it also:

- Fixes the existing -git tree entries for drivers/media (since the
          repository name changed);

- Adds the missing drivers/media -git tree entry on a few maintainers
          entries that don't point to a tree.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10190): cx88: Fix some Kbuild troubles
Mauro Carvalho Chehab [Tue, 6 Jan 2009 19:06:07 +0000]
V4L/DVB (10190): cx88: Fix some Kbuild troubles

As Randy Dunlap <randy.dunlap@oracle.com> reported, cx88 has some compilation issues:

drivers/built-in.o: In function `cx88_call_i2c_clients':
(.text+0x20af17): undefined reference to `videobuf_dvb_get_frontend'
drivers/built-in.o: In function `cx8802_probe':
cx88-mpeg.c:(.devinit.text+0x268c4): undefined reference to `videobuf_dvb_alloc_frontend'
cx88-mpeg.c:(.devinit.text+0x268ea): undefined reference to `videobuf_dvb_dealloc_frontends'

With those configs:

CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_DVB=m
CONFIG_DVB_CORE=m

After carefully examining the code, with the current code, several cx88 drivers
(cx8800, cx8802, cx88_dvb and cx88_blackbird) should be compiled as a module,
if one of them is marked as such. Just fixing Kconfig could create a very complex
set of rules. Also, this hides a problem with the current approach where the dvb
functionality weren't confined inside dvb module.

What happens is that:
- cx88-i2c (part of cx8800) has some special rules if DVB;
- cx88-mpeg (cx8802 module) has also part of DVB init code;
- cx88-dvb has the rest of the dvb code;
- cx88-blackbird can be used with cx88-mpeg, having cx88-dvb or not.

So, instead of doing some tricks at Kconfig and wait for a next breakage,
this patch moves the dvb code inside cx88-i2c and cx88-mpeg into cx88-dvb.

Another problem is that cx8802 were being compiled, even without cx88-dvb
and cx88-blackbird modules.

While on this code, let's fix also a reported problem:
http://www.linuxtv.org/pipermail/linux-dvb/2009-January/031225.html

A solution for the issue were proposed here:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg00021.html

Thanks to Randy, Andy, Gregoire and Thomas for helping us to detect
and solve the issues.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10189): dm1105: Fix build with INPUT=m and DVB_DM1105=y
Mauro Carvalho Chehab [Tue, 6 Jan 2009 11:33:46 +0000]
V4L/DVB (10189): dm1105: Fix build with INPUT=m and DVB_DM1105=y

As reported by Randy Dunlap <randy.dunlap@oracle.com>:

With CONFIG_INPUT=m and CONFIG_DVB_DM1105=y:

drivers/built-in.o: In function `input_sync':
dm1105.c:(.text+0x120c33): undefined reference to `input_event'
drivers/built-in.o: In function `dm1105_emit_key':
dm1105.c:(.text+0x120c6c): undefined reference to `input_event'
dm1105.c:(.text+0x120c82): undefined reference to `input_event'
dm1105.c:(.text+0x120cb2): undefined reference to `input_event'
dm1105.c:(.text+0x120cd1): undefined reference to `input_event'
drivers/built-in.o: In function `dm1105_ir_init':
(.devinit.text+0xd8ae): undefined reference to `input_allocate_device'
drivers/built-in.o: In function `dm1105_ir_init':
(.devinit.text+0xd9f6): undefined reference to `input_register_device'
drivers/built-in.o: In function `dm1105_ir_init':
(.devinit.text+0xda09): undefined reference to `input_free_device'
drivers/built-in.o: In function `dm1105_ir_exit':
(.devexit.text+0xcde): undefined reference to `input_unregister_device'

This is due to the lack of a dependency between dm1105 and CONFIG_INPUT

Cc: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10185): Use negated usb_endpoint_xfer_control, etc
Julia Lawall [Sat, 3 Jan 2009 19:53:10 +0000]
V4L/DVB (10185): Use negated usb_endpoint_xfer_control, etc

This patch extends 134179823b3ca9c8b98e0631906459dbb022ff9b by using
usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk,
and usb_endpoint_xfer_int in the negated case as well.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ !usb_endpoint_xfer_control(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\))
+ !usb_endpoint_xfer_isoc(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\))
+ !usb_endpoint_xfer_bulk(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\))
+ !usb_endpoint_xfer_int(epd)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization
Michael Krufky [Mon, 5 Jan 2009 21:25:04 +0000]
V4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization

Don't call tda8290_init_tuner unless we have either a TDA8275 or TDA8275A
present. Calling this function will cause a TDA18271 to get sick, so we
should only call it when needed.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10181): v4l2-device: Fix some sparse warnings
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:42:38 +0000]
V4L/DVB (10181): v4l2-device: Fix some sparse warnings

/home/v4l/master/v4l/v4l2-device.c:32:2: warning: Using plain integer as NULL pointer
/home/v4l/master/v4l/v4l2-device.c:64:2: warning: Using plain integer as NULL pointer

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10180): drivers/media: Fix a number of sparse warnings
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:34:20 +0000]
V4L/DVB (10180): drivers/media: Fix a number of sparse warnings

anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static?
cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static?
stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static?
stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static?
stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static?
stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static?
stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static?
budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static?
/home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static?
/home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static?

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10179): tda8290: Fix two sparse warnings
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:23:50 +0000]
V4L/DVB (10179): tda8290: Fix two sparse warnings

/home/v4l/master/v4l/tda8290.c:233:7: warning: symbol 'i' shadows an earlier one
/home/v4l/master/v4l/tda8290.c:178:3: warning: symbol 'fm_mode' was not declared. Should it be static?

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10178): dvb_frontend: Fix some sparse warnings due to static symbols
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:19:06 +0000]
V4L/DVB (10178): dvb_frontend: Fix some sparse warnings due to static symbols

/home/v4l/master/v4l/dvb_frontend.c:838:19: warning: symbol 'dtv_cmds' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1035:6: warning: symbol 'dtv_property_dump' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1066:5: warning: symbol 'is_legacy_delivery_system' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1080:6: warning: symbol 'dtv_property_cache_sync' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1132:6: warning: symbol 'dtv_property_legacy_params_sync' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1187:6: warning: symbol 'dtv_property_adv_params_sync' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1222:6: warning: symbol 'dtv_property_cache_submit' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1253:5: warning: symbol 'dtv_property_process_get' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1362:5: warning: symbol 'dtv_property_process_set' was not declared. Should it be static?

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10177): Fix sparse warnings on em28xx
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:00:40 +0000]
V4L/DVB (10177): Fix sparse warnings on em28xx

/home/v4l/master/v4l/em28xx-core.c:396:25: warning: symbol 'outputs' was not declared. Should it be static?
/home/v4l/master/v4l/em28xx-input.c:324:6: warning: symbol 'em28xx_ir_start' was not declared. Should it be static?
/home/v4l/master/v4l/em28xx-cards.c:1925:5: warning: symbol 'em28xx_init_dev' was not declared. Should it be static?

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10176b): pxa-camera: fix redefinition warnings and missing DMA definitions
Eric Miao [Fri, 2 Jan 2009 15:16:02 +0000]
V4L/DVB (10176b): pxa-camera: fix redefinition warnings and missing DMA definitions

1. now pxa_camera.c uses ioremap() for register access, pxa_camera.h is
   totally useless. Remove it.

2. <asm/dma.h> does no longer include <mach/dma.h>, include the latter
   file explicitly

 delete mode 100644 drivers/media/video/pxa_camera.h

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agoV4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage
Guennadi Liakhovetski [Sat, 3 Jan 2009 21:20:04 +0000]
V4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage

Not all architectures provide clear_user_page(), but clear_user_highpage()
is available everywhere at least via the compatibility inline function.

Is this the "trivial patch" that's required for these two drivers?

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

12 years agostaging: __FUNCTION__ is gcc-specific, use __func__
Harvey Harrison [Wed, 7 Jan 2009 22:31:57 +0000]
staging: __FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotrivial: replace last usages of __FUNCTION__ in kernel
Harvey Harrison [Wed, 7 Jan 2009 22:42:41 +0000]
trivial: replace last usages of __FUNCTION__ in kernel

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 7 Jan 2009 23:43:58 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix possible recursive rq->lock

12 years agoMerge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Wed, 7 Jan 2009 23:41:01 +0000]
Merge branch 'linux-next' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (98 commits)
  PCI PM: Put PM callbacks in the order of execution
  PCI PM: Run default PM callbacks for all devices using new framework
  PCI PM: Register power state of devices during initialization
  PCI PM: Call pci_fixup_device from legacy routines
  PCI PM: Rearrange code in pci-driver.c
  PCI PM: Avoid touching devices behind bridges in unknown state
  PCI PM: Move pci_has_legacy_pm_support
  PCI PM: Power-manage devices without drivers during suspend-resume
  PCI PM: Add suspend counterpart of pci_reenable_device
  PCI PM: Fix poweroff and restore callbacks
  PCI: Use msleep instead of cpu_relax during ASPM link retraining
  PCI: PCIe portdrv: Add kerneldoc comments to remining core funtions
  PCI: PCIe portdrv: Rearrange code so that related things are together
  PCI: PCIe portdrv: Fix suspend and resume of PCI Express port services
  PCI: PCIe portdrv: Add kerneldoc comments to some core functions
  x86/PCI: Do not use interrupt links for devices using MSI-X
  net: sfc: Use pci_clear_master() to disable bus mastering
  PCI: Add pci_clear_master() as opposite of pci_set_master()
  PCI hotplug: remove redundant test in cpq hotplug
  PCI: pciehp: cleanup register and field definitions
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Wed, 7 Jan 2009 23:37:24 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (123 commits)
  wimax/i2400m: add CREDITS and MAINTAINERS entries
  wimax: export linux/wimax.h and linux/wimax/i2400m.h with headers_install
  i2400m: Makefile and Kconfig
  i2400m/SDIO: TX and RX path backends
  i2400m/SDIO: firmware upload backend
  i2400m/SDIO: probe/disconnect, dev init/shutdown and reset backends
  i2400m/SDIO: header for the SDIO subdriver
  i2400m/USB: TX and RX path backends
  i2400m/USB: firmware upload backend
  i2400m/USB: probe/disconnect, dev init/shutdown and reset backends
  i2400m/USB: header for the USB bus driver
  i2400m: debugfs controls
  i2400m: various functions for device management
  i2400m: RX and TX data/control paths
  i2400m: firmware loading and bootrom initialization
  i2400m: linkage to the networking stack
  i2400m: Generic probe/disconnect, reset and message passing
  i2400m: host/device procotol and core driver definitions
  i2400m: documentation and instructions for usage
  wimax: Makefile, Kconfig and docbook linkage for the stack
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async
Linus Torvalds [Wed, 7 Jan 2009 23:35:47 +0000]
Merge git://git./linux/kernel/git/arjan/linux-2.6-async

* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async:
  async: don't do the initcall stuff post boot
  bootchart: improve output based on Dave Jones' feedback
  async: make the final inode deletion an asynchronous event
  fastboot: Make libata initialization even more async
  fastboot: make the libata port scan asynchronous
  fastboot: make scsi probes asynchronous
  async: Asynchronous function calls to speed up kernel boot

12 years agotopology: Fix sparc64 build.
David Miller [Wed, 7 Jan 2009 23:30:05 +0000]
topology: Fix sparc64 build.

Due to changeset ba84be2338d3a2b6020d39279335bb06fcd332e1 ("remove
linux/hardirq.h from asm-generic/local.h") the sparc64 build started
failing on drivers/base/topology.c:

  drivers/base/topology.c: In function ‘show_physical_package_id’:
  drivers/base/topology.c:103: error: implicit declaration of function ‘cpu_data’
  drivers/base/topology.c:103: error: request for member ‘proc_id’ in something not a structure or union
  drivers/base/topology.c: In function ‘show_core_id’:
  drivers/base/topology.c:106: error: request for member ‘core_id’ in something not a structure or union

Adding the obvious fix of including asm/cpudata.h into asm/topology.h on
sparc64 doesn't fix it, in fact it makes things worse because of the
header file dependency chain:

linux/gfp.h --> linux/mmzone.h --> linux/topology.h -->
asm/topology.h --> asm/cpudata.h --> linux/percpu.h -->
linux/slab.h

which results in:

  include/linux/slub_def.h: In function ‘kmalloc_large’:
  include/linux/slub_def.h:209: error: implicit declaration of function ‘__get_free_pages’
  include/linux/slub_def.h:209: error: ‘__GFP_COMP’ undeclared (first use in this function)
  include/linux/slub_def.h:209: error: (Each undeclared identifier is reported only once
  include/linux/slub_def.h:209: error: for each function it appears in.)
  include/linux/slub_def.h:209: warning: cast to pointer from integer of different size

The simplest thing to do is to add yet another one-off hack like parts
of the guilty changeset did, by putting an explicit linux/hardirq.h
include into drivers/base/topology.c

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agonfsd: get rid of NFSD_VERSION
Benny Halevy [Mon, 15 Dec 2008 17:42:24 +0000]
nfsd: get rid of NFSD_VERSION

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agonfsd: last_byte_offset
Benny Halevy [Mon, 15 Dec 2008 17:42:03 +0000]
nfsd: last_byte_offset

refactor the nfs4 server lock code to use last_byte_offset
to compute the last byte covered by the lock.  Check for overflow
so that the last byte is set to NFS4_MAX_UINT64 if offset + len
wraps around.

Also, use NFS4_MAX_UINT64 for ~(u64)0 where appropriate.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agonfsd: delete wrong file comment from nfsd/nfs4xdr.c
Marc Eshel [Mon, 15 Dec 2008 17:41:31 +0000]
nfsd: delete wrong file comment from nfsd/nfs4xdr.c

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agonfsd: git rid of nfs4_cb_null_ops declaration
Benny Halevy [Mon, 15 Dec 2008 17:41:10 +0000]
nfsd: git rid of nfs4_cb_null_ops declaration

There's no use for nfs4_cb_null_ops's declaration in fs/nfsd/nfs4callback.c

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agonfsd: dprint each op status in nfsd4_proc_compound
Benny Halevy [Mon, 15 Dec 2008 17:40:49 +0000]
nfsd: dprint each op status in nfsd4_proc_compound

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agonfsd: add etoosmall to nfserrno
Dean Hildebrand [Mon, 15 Dec 2008 17:40:15 +0000]
nfsd: add etoosmall to nfserrno

Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agoNFSD: FIDs need to take precedence over UUIDs
Steve Dickson [Wed, 7 Jan 2009 21:54:30 +0000]
NFSD: FIDs need to take precedence over UUIDs

When determining the fsid_type in fh_compose(), the setting of the FID
via fsid= export option needs to take precedence over using the UUID
device id.

Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agoSUNRPC: The sunrpc server code should not be used by out-of-tree modules
Trond Myklebust [Tue, 23 Dec 2008 21:30:12 +0000]
SUNRPC: The sunrpc server code should not be used by out-of-tree modules

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agosvc: Clean up deferred requests on transport destruction
Tom Tucker [Mon, 5 Jan 2009 21:21:19 +0000]
svc: Clean up deferred requests on transport destruction

A race between svc_revisit and svc_delete_xprt can result in
deferred requests holding references on a transport that can never be
recovered because dead transports are not enqueued for subsequent
processing.

Check for XPT_DEAD in revisit to clean up completing deferrals on a dead
transport and sweep a transport's deferred queue to do the same for queued
but unprocessed deferrals.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
Linus Torvalds [Wed, 7 Jan 2009 21:11:28 +0000]
Merge git://git./linux/kernel/git/sam/kbuild-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: fix typos (s/bin_shipped/bin.o_shipped/) in Documentation
  kbuild: add a symlink to the source for separate objdirs
  kconfig: add script to manipulate .config files on the command line
  kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope
  bootchart: improve output based on Dave Jones' feedback
  fix modules_install via NFS
  qnx: include <linux/types.h> for definitions of __[us]{8,16,32,64} types

12 years agokbuild: fix typos (s/bin_shipped/bin.o_shipped/) in Documentation
Wolfram Sang [Tue, 6 Jan 2009 14:12:27 +0000]
kbuild: fix typos (s/bin_shipped/bin.o_shipped/) in Documentation

The text always mentions ...bin.o_shipped, just the example makefiles
actually use ...bin_shipped. It was corrected in one place some time
ago, these ones seem to have been forgotten.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

12 years agokbuild: add a symlink to the source for separate objdirs
Andi Kleen [Sat, 3 Jan 2009 02:21:42 +0000]
kbuild: add a symlink to the source for separate objdirs

I have some scripts which need to map back to the source directory
from an objdir. This was so far done by parsing the Makefile,
but the Makefile format changes occasionally and breaks my scripts
then.

To make this more reliable add a "source" symlink back.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

12 years agokconfig: add script to manipulate .config files on the command line
Andi Kleen [Sat, 3 Jan 2009 02:21:41 +0000]
kconfig: add script to manipulate .config files on the command line

I often change single options in .config files. Instead of using
an editor or one of the frontends it's convenient to do this from
the command line. It's also useful to do from automated build scripts
when building different variants from a base config file.

I extracted most of the CONFIG manipulation code from one of my
build scripts into a new shell script scripts/config

The script is not integrated with the normal Kconfig machinery
and doesn't do any checking against Kconfig files, but just manipulates
that text format. This is always done at make time anyways.

I believe this script would be a useful standard addition for scripts/*

Sample usage:

./scripts/config --disable smp
Disable SMP in .config file

./scripts/config --file otherdir/.config --module e1000e
Enable E1000E as module in otherdir/.config

./scripts/config --state smp
y
Check state of config option CONFIG_SMP

After merging into git please make scripts/config executable

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

12 years agokbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope
Jike Song [Mon, 5 Jan 2009 06:57:03 +0000]
kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope

This patch reintroduce the ALLSOURCE_ARCHS support for tags/TAGS/
cscope targets. The Kbuild previously has this feature, but after
moving the targets into scripts/tags.sh, ALLSOURCE_ARCHS disappears.

It's something like this:

$ make ALLSOURCE_ARCHS="x86 mips arm" tags cscope

Signed-off-by: Jike Song <albcamus@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

12 years agobootchart: improve output based on Dave Jones' feedback
Arjan van de Ven [Sun, 4 Jan 2009 15:16:38 +0000]
bootchart: improve output based on Dave Jones' feedback

Dave Jones, in his blog, had some feedback about the bootchart script:
Primarily his complaint was that shorter delays weren't visualized.

The reason for that was that too small delays will have their labels
mixed up in the graph in an unreadable mess.

This patch has a fix for this; for one, it makes the output wider,
so more will fit.
The second part is that smaller delays are now shown with a
much smaller font for the label; while this isn't per se
readable at a 1:1 zoom, at least you can zoom in with most SVG
viewing applications and see what it is you are looking at.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

12 years agofix modules_install via NFS
Sam Ravnborg [Wed, 7 Jan 2009 19:52:43 +0000]
fix modules_install via NFS

Rafael reported:

I get the following error from 'make modules_install' on my test boxes:

  HOSTCC  firmware/ihex2fw
/home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
compilation terminated.
make[3]: *** [firmware/ihex2fw] Error 1
make[2]: *** [_modinst_post] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2

where the configuration is that the kernel is compiled on a build box
with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
each test box (full path to this directory is the same on the build box and on
the test boxes).  Then, I cd into <destdir>, run 'make modules_install' and get
the error above.

The issue turns out to be that we when we install firmware pick
up the list of firmware blobs from firmware/Makefile.
And this triggers the Makefile rules to update ihex2fw.

There were two solutions for this issue:
1) Move the list of firmware blobs to a separate file
2) Avoid ihex2fw rebuild by moving it to scripts

As I seriously beleive that the list of firmware blobs should be
done in a fundamental different way solution 2) was selected.

Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>

12 years agoqnx: include <linux/types.h> for definitions of __[us]{8,16,32,64} types
Anders Larsen [Thu, 1 Jan 2009 16:17:35 +0000]
qnx: include <linux/types.h> for definitions of __[us]{8,16,32,64} types

On 2008-12-30 11:32:33, Sam Ravnborg wrote:
> We have added a few additional validation checks of the userspace headers:
...
> 3) We should include <linux/types.h> and not <asm/types.h>
> 4) If we use a __[us]{8,16,32,64} type then we must include <linux/types.h>

Satisfy these requirements for the linux/qnx*.h headers.

Signed-off-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

12 years agonfsd: fix double-locks of directory mutex
J. Bruce Fields [Tue, 6 Jan 2009 18:37:03 +0000]
nfsd: fix double-locks of directory mutex

A number of nfsd operations depend on the i_mutex to cover more code
than just the fsync, so the approach of 4c728ef583b3d8 "add a vfs_fsync
helper" doesn't work for nfsd.  Revert the parts of those patches that
touch nfsd.

Note: we can't, however, remove the logic from vfs_fsync that was needed
only for the special case of nfsd, because a vfs_fsync(NULL,...) call
can still result indirectly from a stackable filesystem that was called
by nfsd.  (Thanks to Christoph Hellwig for pointing this out.)

Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agosvc: Move kfree of deferral record to common code
Tom Tucker [Mon, 5 Jan 2009 17:12:52 +0000]
svc: Move kfree of deferral record to common code

The rqstp structure has a pointer to a svc_deferred_req record
that is allocated when requests are deferred. This record is common
to all transports and can be freed in common code.

Move the kfree of the rq_deferred to the common svc_xprt_release
function.

This also fixes a memory leak in the RDMA transport which does not
kfree the dr structure in it's version of the xpo_release_rqst callback.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agoCRED: Fix NFSD regression
David Howells [Mon, 5 Jan 2009 17:19:37 +0000]
CRED: Fix NFSD regression

Fix a regression in NFSD's permission checking introduced by the credentials
patches.  There are two parts to the problem, both in nfsd_setuser():

 (1) The return value of set_groups() is -ve if in error, not 0, and should be
     checked appropriately.  0 indicates success.

 (2) The UID to use for fs accesses is in new->fsuid, not new->uid (which is
     0).  This causes CAP_DAC_OVERRIDE to always be set, rather than being
     cleared if the UID is anything other than 0 after squashing.

Reported-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agoNLM: Clean up flow of control in make_socks() function
Chuck Lever [Wed, 31 Dec 2008 21:06:11 +0000]
NLM: Clean up flow of control in make_socks() function

Clean up: Use Bruce's preferred control flow style in make_socks().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agoNLM: Refactor make_socks() function
Chuck Lever [Wed, 31 Dec 2008 21:06:04 +0000]
NLM: Refactor make_socks() function

Clean up: extract common logic in NLM's make_socks() function
into a helper.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agonfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT
J. Bruce Fields [Sat, 20 Dec 2008 19:58:38 +0000]
nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT

Since nfsv4 allows LOCKT without an open, but the ->lock() method is a
file method, we fake up a struct file in the nfsv4 code with just the
fields we need initialized.  But we forgot to initialize the file
operations, with the result that LOCKT never results in a call to the
filesystem's ->lock() method (if it exists).

We could just add that one more initialization.  But this hack of faking
up a struct file with only some fields initialized seems the kind of
thing that might cause more problems in the future.  We should either do
an open and get a real struct file, or make lock-testing an inode (not a
file) method.

This patch does the former.

Reported-by: Marc Eshel <eshel@almaden.ibm.com>
Tested-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

12 years agoxtensa: introduce swab.h
Harvey Harrison [Wed, 7 Jan 2009 20:19:31 +0000]
xtensa: introduce swab.h

Fixes compile breakage as linux/byteorder.h was removed.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Wed, 7 Jan 2009 20:05:32 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: reorder struct fw_card for better cache efficiency
  firewire: fix resetting of bus manager retry counter
  firewire: improve refcounting of fw_card
  firewire: typo in comment
  firewire: fix small memory leak at module removal
  firewire: fw-sbp2: remove unnecessary locking
  ieee1934: dv1394: interrupt enabling/disabling broken on big-endian
  ieee1394: dv1394: annotate frame input/output structs as little endian
  ieee1394: eth1394: trivial sparse annotations
  ieee1394: mark bus_info_data as a __be32 array
  ieee1394: replace CSR_SET_BUS_INFO_GENERATION macro
  ieee1394: pcilynx: trivial endian annotation
  ieee1394: ignore nonzero Bus_Info_Block.max_rom, fetch config ROM in quadlets
  ieee1394: consolidate uses of IEEE1934_BUSID_MAGIC
  ieee1394: ohci1394: flush MMIO writes before delay in initialization
  ieee1394: ohci1394: pass error codes from request_irq through
  ieee1394: ohci1394: don't leave interrupts enabled during suspend/resume
  ieee1394: mark all hpsb_address_ops instances as const
  ieee1394: replace a GFP_ATOMIC by GFP_KERNEL allocation

12 years agoMerge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan...
Linus Torvalds [Wed, 7 Jan 2009 20:01:06 +0000]
Merge branch 'proc-linus' of git://git./linux/kernel/git/adobriyan/proc

* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  proc: remove write-only variable in proc_pident_lookup()
  proc: fix sparse warning
  proc: add /proc/*/stack
  proc: remove '##' usage
  proc: remove useless WARN_ONs
  proc: stop using BKL

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Wed, 7 Jan 2009 20:00:25 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (171 commits)
  Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) value
  Blackfin arch: Enlarge flash partition for kenel for bf533/bf537 boards
  Blackfin arch: fix bug: kernel crash when enable SDIO host driver
  Blackfin arch: Print FP at level KERN_NOTICE
  Blackfin arch: drop ad73311 test code
  Blackfin arch: update board default configs
  Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.
  Blackfin arch: fix typo in early printk bit size processing
  Blackfin arch: enable reprogram cclk and sclk for bf518f-ezbrd
  Blackfin arch: add SDIO host driver platform data
  Blackfin arch: fix bug - kernel stops at initial console
  Blackfin arch: fix bug - kernel crash after config IP for ethernet port
  Blackfin arch: add sdh support for bf518f-ezbrd
  Blackfin arch: fix bug - kernel detects BF532 incorrectly
  Blackfin arch: add () to avoid warnings from gcc
  Blackfin arch: change HWTRACE Kconfig and set it on default
  Blackfin arch: Clean oprofile build path for blackfin
  Blackfin arch: remove hardware PM code, oprofile not use it
  Blackfin arch: rewrite get_sclk()/get_vco()
  Blackfin arch: cleanup and unify the ins functions
  ...

12 years agoMerge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Wed, 7 Jan 2009 19:59:51 +0000]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (29 commits)
  hwmon: Fix various typos
  hwmon: Check for ACPI resource conflicts
  hwmon: (lm70) Add TI TMP121 support
  hwmon: (lm70) Code streamlining and cleanup
  hwmon: Deprecate the fscher and fscpos drivers
  hwmon: (fschmd) Add watchdog support
  hwmon: (fschmd) Cleanups for watchdog support
  hwmon: (i5k_amb) Load automatically on all 5000/5400 chipsets
  hwmon: (it87) Add support for the ITE IT8720F
  hwmon: Don't overuse I2C_CLIENT_MODULE_PARM
  hwmon: Add LTC4245 driver
  hwmon: (f71882fg) Fix fan_to/from_reg prototypes
  hwmon: (f71882fg) Printout fan modes
  hwmon: (f71882fg) Add documentation
  hwmon: (f71882fg) Fix auto_channels_temp temp numbering with f8000
  hwmon: (f71882fg) Add missing pwm3 attr for f71862fg
  hwmon: (f71882fg) Add F8000 support
  hwmon: (f71882fg) Remove the fan_mode module option
  hwmon: (f71882fg) Separate max and crit alarm and beep
  hwmon: (f71882fg) Check for hwmon powerdown state
  ...

12 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Wed, 7 Jan 2009 19:59:27 +0000]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Use snprintf to set adapter names
  Input: apanel - convert to new i2c binding
  i2c: Drop I2C_CLASS_CAM_DIGITAL
  i2c: Drop I2C_CLASS_CAM_ANALOG and I2C_CLASS_SOUND
  i2c: Drop I2C_CLASS_ALL
  i2c: Get rid of remaining bus_id access
  i2c: Replace bus_id with dev_name(), dev_set_name()

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
Linus Torvalds [Wed, 7 Jan 2009 19:58:30 +0000]
Merge git://git./linux/kernel/git/hskinnemoen/avr32-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Move syscalls.h under arch/avr32/include/asm/
  avr32: Define DIE_OOPS
  avr32: Remove DMATEST from defconfigs
  arch/avr32: Eliminate NULL test and memset after alloc_bootmem
  avr32: data param to at32_add_device_mci() must be non-NULL
  atmel-mci: move atmel-mci.h file to include/linux
  avr32: Hammerhead board support
  avr32: Allow reserving multiple pins at once
  favr-32: Remove deprecated call
  MIMC200: Remove deprecated call
  avr: struct device - replace bus_id with dev_name(), dev_set_name()
  avr32: Introducing asm/syscalls.h

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
Linus Torvalds [Wed, 7 Jan 2009 19:58:06 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Fix typo in gfs_page_mkwrite()
  GFS2: LSF and LBD are now one and the same
  GFS2: Set GFP_NOFS when allocating page on write

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6
Linus Torvalds [Wed, 7 Jan 2009 19:56:29 +0000]
Merge git://git./linux/kernel/git/czankel/xtensa-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
  xtensa: Update platform files to reflect new location of the header files.
  xtensa: switch to packed struct unaligned access implementation
  xtensa: Add xt2000 support files.
  xtensa: move headers files to arch/xtensa/include
  xtensa: use the new byteorder headers

12 years agostop_machine/cpu hotplug: fix disable_nonboot_cpus
Heiko Carstens [Wed, 7 Jan 2009 15:19:46 +0000]
stop_machine/cpu hotplug: fix disable_nonboot_cpus

disable_nonboot_cpus calls _cpu_down. But _cpu_down requires that the
caller already created the stop_machine workqueue (like cpu_down does).
Otherwise a call to stop_machine will lead to accesses to random memory
regions.

When introducing this new interface (9ea09af3bd3090e8349ca2899ca2011bd94cda85
"stop_machine: introduce stop_machine_create/destroy") I missed the second
call site of _cpu_down.
So add the missing stop_machine_create/destroy calls to disable_nonboot_cpus
as well.

Fixes suspend-to-ram/disk and also this bug:

[  286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b
[  286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3
[  286.550598] Oops: 0002 [#1] SMP
[  286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5
[  286.560580] EIP: is at __stop_machine+0x88/0xe3
[  286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30
[  286.560580] Call Trace:
[  286.560580]  [<c03d04e4>] ? _cpu_down+0x10f/0x234
[  286.560580]  [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc
[  286.560580]  [<c01360c0>] ? kernel_poweroff+0x22/0x39
[  286.560580]  [<c0136301>] ? sys_reboot+0xde/0x14c
[  286.560580]  [<c01331b2>] ? complete_signal+0x179/0x191
[  286.560580]  [<c0133396>] ? send_signal+0x1cc/0x1e1
[  286.560580]  [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c
[  286.560580]  [<c0133b65>] ? group_send_signal_info+0x58/0x61
[  286.560580]  [<c0133b9e>] ? kill_pid_info+0x30/0x3a
[  286.560580]  [<c0133d49>] ? sys_kill+0x75/0x13a
[  286.560580]  [<c01a06cb>] ? mntput_no_expire+ox1f/0x101
[  286.560580]  [<c019b3b3>] ? dput+0x1e/0x105
[  286.560580]  [<c018ef87>] ?  __fput+0x150/0x158
[  286.560580]  [<c0157abf>] ? audit_syscall_entry+0x137/0x159
[  286.560580]  [<c010329f>] ? sysenter_do_call+0x12/0x34

Reported-and-tested-by: "Justin P. Mattock" <justinmattock@gmail.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotouchscreen: Fix build of da9034
Alan Cox [Wed, 7 Jan 2009 11:40:03 +0000]
touchscreen: Fix build of da9034

Missing an include and thus breaks the x86-64 build.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Linus Torvalds [Wed, 7 Jan 2009 19:31:52 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  trivial: chack -> check typo fix in main Makefile
  trivial: Add a space (and a comma) to a printk in 8250 driver
  trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx
  trivial: Fix misspelling of "firmware" in powerpc Makefile
  trivial: Fix misspelling of "firmware" in usb.c
  trivial: Fix misspelling of "firmware" in qla1280.c
  trivial: Fix misspelling of "firmware" in a100u2w.c
  trivial: Fix misspelling of "firmware" in megaraid.c
  trivial: Fix misspelling of "firmware" in ql4_mbx.c
  trivial: Fix misspelling of "firmware" in acpi_memhotplug.c
  trivial: Fix misspelling of "firmware" in ipw2100.c
  trivial: Fix misspelling of "firmware" in atmel.c
  trivial: Fix misspelled firmware in Kconfig
  trivial: fix an -> a typos in documentation and comments
  trivial: fix then -> than typos in comments and documentation
  trivial: update Jesper Juhl CREDITS entry with new email
  trivial: fix singal -> signal typo
  trivial: Fix incorrect use of "loose" in event.c
  trivial: printk: fix indentation of new_text_line declaration
  trivial: rtc-stk17ta8: fix sparse warning
  ...