13 years agoparisc: fix trivial section name warnings
Helge Deller [Fri, 2 May 2008 20:02:48 +0000]
parisc: fix trivial section name warnings

This trivial patch fixes the following section warnings on PARISC:
> WARNING: vmlinux.o (.text.1): unexpected section name.
>The (.[number]+) following section name are ld generated and not expected.
> Did you forget to use "ax"/"aw" in a .S file?
> Note that for example <linux/init.h> contains
> section definitions for use in .S files.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

13 years agoLinux 2.6.26-rc2
Linus Torvalds [Mon, 12 May 2008 00:09:41 +0000]
Linux 2.6.26-rc2

13 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Mon, 12 May 2008 00:09:24 +0000]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Convert some more new-style drivers to use module aliasing
  i2c: Match dummy devices by type
  i2c-sibyte: Mark i2c_sibyte_add_bus() as static
  i2c-sibyte: Correct a comment about frequency
  i2c: Improve the functionality documentation
  i2c: Improve smbus-protocol documentation
  i2c-piix4: Blacklist two mainboards
  i2c-piix4: Increase the intitial delay for the ServerWorks CSB5
  i2c-mpc: Compare to NO_IRQ instead of zero

13 years agoAdd new 'cond_resched_bkl()' helper function
Linus Torvalds [Sun, 11 May 2008 23:04:48 +0000]
Add new 'cond_resched_bkl()' helper function

It acts exactly like a regular 'cond_resched()', but will not get
optimized away when CONFIG_PREEMPT is set.

Normal kernel code is already preemptable in the presense of
CONFIG_PREEMPT, so cond_resched() is optimized away (see commit
02b67cc3ba36bdba351d6c3a00593f4ec550d9d3 "sched: do not do
cond_resched() when CONFIG_PREEMPT").

But when wanting to conditionally reschedule while holding a lock, you
need to use "cond_sched_lock(lock)", and the new function is the BKL
equivalent of that.

Also make fs/locks.c use it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoi2c: Convert some more new-style drivers to use module aliasing
Jean Delvare [Sun, 11 May 2008 18:37:06 +0000]
i2c: Convert some more new-style drivers to use module aliasing

Update 3 more new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. These
video drivers aren't used yet so converting them is trivial.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Match dummy devices by type
Jean Delvare [Sun, 11 May 2008 18:37:06 +0000]
i2c: Match dummy devices by type

As the old driver_name/type matching scheme is going away soon, change
the dummy device mechanism to use the new matching scheme.

This has the downside that dummy i2c clients can no longer choose
their name, they'll all appear as "dummy" in sysfs and in log
messages. I don't think it is a problem in practice though, as there
is little reason to use these i2c clients to log messages.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-sibyte: Mark i2c_sibyte_add_bus() as static
Maciej W. Rozycki [Sun, 11 May 2008 18:37:05 +0000]
i2c-sibyte: Mark i2c_sibyte_add_bus() as static

The i2c_sibyte_add_bus() function is not called, nor meant to, from
outside, so mark it as static; fixing a sparse warning too.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-sibyte: Correct a comment about frequency
Maciej W. Rozycki [Sun, 11 May 2008 18:37:05 +0000]
i2c-sibyte: Correct a comment about frequency

The frequency may have been once hardcoded to 100 kHz, but currently it is
passed as an argument to i2c_sibyte_add_bus(), so update the comment to
match code.  While at it, reformat a nearby comment for consistency.  No
functional changes.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Improve the functionality documentation
Jean Delvare [Sun, 11 May 2008 18:37:05 +0000]
i2c: Improve the functionality documentation

Attempt to make the documentation about the I2C/SMBus functionality
checking API clearer.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Improve smbus-protocol documentation
David Brownell [Sun, 11 May 2008 18:37:05 +0000]
i2c: Improve smbus-protocol documentation

Improve the smbus-protocol documentation file somewhat:

 - Use the names of the SMBus protocol operations (from the 2.0
   specification), not made-up-for-Linux names.

 - Add the name of the call used to execute each operation ... and
   point out that there are mismatches, where functions execute
   different protocol operations than their names specify.

The most confusing examples are that "Read Byte" isn't executed by
i2c_smbus_read_byte(), and that "Write Byte" isn't executed by
i2c_smbus_write_byte().  When coding, that's not as bad as it may
seem; but that case would seem to be worth fixing.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-piix4: Blacklist two mainboards
Jean Delvare [Sun, 11 May 2008 18:37:05 +0000]
i2c-piix4: Blacklist two mainboards

We had a report that running sensors-detect on a Sapphire AM2RD790
motherbord killed the CPU. While the exact cause is still unknown,
I'd rather play it safe and prevent any access to the SMBus on that
machine by not letting the i2c-piix4 driver attach to the SMBus host
device on that machine. Also blacklist a similar board made by DFI.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-piix4: Increase the intitial delay for the ServerWorks CSB5
David Milburn [Sun, 11 May 2008 18:37:05 +0000]
i2c-piix4: Increase the intitial delay for the ServerWorks CSB5

Per the PIIX4 errata, there maybe a delay between setting the
start bit in the Smbus Host Controller Register and the transaction
actually starting. If the driver doesn't delay long enough, it
may appear that the transaction is complete when actually it
hasn't started, this may lead to bus collisions.

While 1 ms appears to be enough for most chips, the ServerWorks CSB5
wants 2 ms.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-mpc: Compare to NO_IRQ instead of zero
Jon Smirl [Sun, 11 May 2008 18:37:04 +0000]
i2c-mpc: Compare to NO_IRQ instead of zero

Alter the mpc i2c driver to use the NO_IRQ symbol instead of the constant
zero when checking for valid interrupts. NO_IRQ=-1 on ppc and NO_IRQ=0 on
powerpc so the checks against zero are not correct.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agousb-serial: Add ThinkOptics WavIT
Bernhard Beck [Sun, 11 May 2008 16:23:13 +0000]
usb-serial: Add ThinkOptics WavIT

Add ThinkOptics WavIt to cp2101 device table

Signed-off-by: Bernhard Beck <kernel@goodcoffee.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sun, 11 May 2008 16:55:48 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix debugger syscall restart interactions.
  sparc: Fix ptrace() detach.
  sparc32: Don't twiddle PT_DTRACE in exec.
  sparc video: remove open boot prom code

13 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Sun, 11 May 2008 16:52:45 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] revert new check-ready Status register logic

13 years agosparc: Fix debugger syscall restart interactions.
David S. Miller [Sun, 11 May 2008 09:07:19 +0000]
sparc: Fix debugger syscall restart interactions.

So, forever, we've had this ptrace_signal_deliver implementation
which tries to handle all of the nasties that can occur when the
debugger looks at a process about to take a signal.  It's meant
to address all of these issues inside of the kernel so that the
debugger need not be mindful of such things.

Problem is, this doesn't work.

The idea was that we should do the syscall restart business first, so
that the debugger captures that state.  Otherwise, if the debugger for
example saves the child's state, makes the child execute something
else, then restores the saved state, we won't handle the syscall
restart properly because we lose the "we're in a syscall" state.

The code here worked for most cases, but if the debugger actually
passes the signal through to the child unaltered, it's possible that
we would do a syscall restart when we shouldn't have.

In particular this breaks the case of debugging a process under a gdb
which is being debugged by yet another gdb.  gdb uses sigsuspend
to wait for SIGCHLD of the inferior, but if gdb itself is being
debugged by a top-level gdb we get a ptrace_stop().  The top-level gdb
does a PTRACE_CONT with SIGCHLD to let the inferior gdb see the
signal.  But ptrace_signal_deliver() assumed the debugger would cancel
out the signal and therefore did a syscall restart, because the return
error was ERESTARTNOHAND.

Fix this by simply making ptrace_signal_deliver() a nop, and providing
a way for the debugger to control system call restarting properly:

1) Report a "in syscall" software bit in regs->{tstate,psr}.
   It is set early on in trap entry to a system call and is fully
   visible to the debugger via ptrace() and regsets.

2) Test this bit right before doing a syscall restart.  We have
   to do a final recheck right after get_signal_to_deliver() in
   case the debugger cleared the bit during ptrace_stop().

3) Clear the bit in trap return so we don't accidently try to set
   that bit in the real register.

As a result we also get a ptrace_{is,clear}_syscall() for sparc32 just
like sparc64 has.

M68K has this same exact bug, and is now the only other user of the
ptrace_signal_deliver hook.  It needs to be fixed in the same exact
way as sparc.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years agosparc: Fix ptrace() detach.
David S. Miller [Sun, 11 May 2008 04:11:23 +0000]
sparc: Fix ptrace() detach.

Forever we had a PTRACE_SUNOS_DETACH which was unconditionally
recognized, regardless of the personality of the process.

Unfortunately, this value is what ended up in the GLIBC sys/ptrace.h
header file on sparc as PTRACE_DETACH and PT_DETACH.

So continue to recognize this old value.  Luckily, it doesn't conflict
with anything we actually care about.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sun, 11 May 2008 04:14:05 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5033/1: Unbreak corgi_ssp by registering ssp drivers earlier.
  [ARM] Orion: clean up addr-map.c after window setting code purge
  [ARM] Orion: pass proper t_clk into mv643xx_eth
  [ARM] Orion: use mv643xx_eth driver mbus window handling
  [ARM] pxa: Fix RCSR handling
  [ARM] lubbock: fix compilation
  [ARM] 5032/1: Added cpufreq support for pxa27x CPU
  [ARM] 5031/1: Indentation correction in cpu-pxa.c.
  [ARM] 5028/1: pxafb: fix broken "backward compatibility way" in framebuffer
  [ARM] 4882/2: Correction for S3C2410 clkout generation
  [ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle.
  [ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driver
  [ARM] 5023/1: Fix broken gpio interrupts on ep93xx
  ns9xxx: fix sparse warning
  ns9xxx: check for irq lockups
  ns9xxx: fix handle_prio_irq to unmask irqs with lower priority

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux...
Linus Torvalds [Sun, 11 May 2008 04:10:48 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/x86/linux-2.6-x86

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: rdc: leds build/config fix
  x86: sysfs cpu?/topology is empty in 2.6.25 (32-bit Intel system)
  x86: revert commit 709f744 ("x86: bitops asm constraint fixes")
  x86: restrict keyboard io ports reservation to make ipmi driver work
  x86: fix fpu restore from sig return
  x86: remove spew print out about bus to node mapping
  x86: revert printk format warning change which is for linux-next
  x86: cleanup PAT cpu validation
  x86: geode: define geode_has_vsa2() even if CONFIG_MGEODE_LX is not set
  x86: GEODE: cache results from geode_has_vsa2() and uninline
  x86: revert geode config dependency

13 years agoBKL: revert back to the old spinlock implementation
Linus Torvalds [Sun, 11 May 2008 03:58:02 +0000]
BKL: revert back to the old spinlock implementation

The generic semaphore rewrite had a huge performance regression on AIM7
(and potentially other BKL-heavy benchmarks) because the generic
semaphores had been rewritten to be simple to understand and fair.  The
latter, in particular, turns a semaphore-based BKL implementation into a
mess of scheduling.

The attempt to fix the performance regression failed miserably (see the
previous commit 00b41ec2611dc98f87f30753ee00a53db648d662 'Revert
"semaphore: fix"'), and so for now the simple and sane approach is to
instead just go back to the old spinlock-based BKL implementation that
never had any issues like this.

This patch also has the advantage of being reported to fix the
regression completely according to Yanmin Zhang, unlike the semaphore
hack which still left a couple percentage point regression.

As a spinlock, the BKL obviously has the potential to be a latency
issue, but it's not really any different from any other spinlock in that
respect.  We do want to get rid of the BKL asap, but that has been the
plan for several years.

These days, the biggest users are in the tty layer (open/release in
particular) and Alan holds out some hope:

  "tty release is probably a few months away from getting cured - I'm
   afraid it will almost certainly be the very last user of the BKL in
   tty to get fixed as it depends on everything else being sanely locked."

so while we're not there yet, we do have a plan of action.

Tested-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Alexander Viro <viro@ftp.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoRevert "semaphore: fix"
Linus Torvalds [Sun, 11 May 2008 03:43:22 +0000]
Revert "semaphore: fix"

This reverts commit bf726eab3711cf192405d21688a4b21e07b6188a, as it has
been reported to cause a regression with processes stuck in __down(),
apparently because some missing wakeup.

Quoth Sven Wegener:
 "I'm currently investigating a regression that has showed up with my
  last git pull yesterday.  Bisecting the commits showed bf726e
  "semaphore: fix" to be the culprit, reverting it fixed the issue.

  Symptoms: During heavy filesystem usage (e.g.  a kernel compile) I get
  several compiler processes in uninterruptible sleep, blocking all i/o
  on the filesystem.  System is an Intel Core 2 Quad running a 64bit
  kernel and userspace.  Filesystem is xfs on top of lvm.  See below for
  the output of sysrq-w."

See

http://lkml.org/lkml/2008/5/10/45

for full report.

In the meantime, we can just fix the BKL performance regression by
reverting back to the good old BKL spinlock implementation instead,
since any sleeping lock will generally perform badly, especially if it
tries to be fair.

Reported-by: Sven Wegener <sven.wegener@stealer.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMake <asm-x86/spinlock.h> use ACCESS_ONCE()
Linus Torvalds [Sun, 11 May 2008 02:52:43 +0000]
Make <asm-x86/spinlock.h> use ACCESS_ONCE()

..instead of cooking up its own uglier local version of it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMove ACCESS_ONCE() to <linux/compiler.h>
Linus Torvalds [Sun, 11 May 2008 02:51:16 +0000]
Move ACCESS_ONCE() to <linux/compiler.h>

It actually makes much more sense there, and we do tend to need it for
non-RCU usage too.  Moving it to <linux/compiler.h> will allow some
other cases that have open-coded the same logic to use the same helper
function that RCU has used.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agox86: rdc: leds build/config fix
Ingo Molnar [Thu, 1 May 2008 01:46:22 +0000]
x86: rdc: leds build/config fix

select NEW_LEDS for now until the Kconfig dependencies have been
fixed.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

13 years agox86: sysfs cpu?/topology is empty in 2.6.25 (32-bit Intel system)
Vaidyanathan Srinivasan [Mon, 5 May 2008 13:52:15 +0000]
x86: sysfs cpu?/topology is empty in 2.6.25 (32-bit Intel system)

System topology on intel based system needs to be exported
for non-numa case as well.

All parts of asm-i386/topology.h has come under
#ifdef CONFIG_NUMA after the merge to asm-x86/topology.h

/sys/devices/system/cpu/cpu?/topology/* is populated based on
ENABLE_TOPO_DEFINES

The sysfs cpu topology is not being populated on my dual socket
dual core xeon 5160 processor based (x86 32 bit) system.

CONFIG_NUMA is not set in my case yet the topology is relevant
and useful.

irqbalance daemon application depends on topology to build the
cpus and package list and it fails on Fedora9 beta since the
sysfs topology was not being populated in the 2.6.25 kernel.

I am not sure if it was intentional to not define ENABLE_TOPO_DEFINES
for non-numa systems.

This fix has been tested on the above mentioned dual core, dual socket
system.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org

13 years agox86: revert commit 709f744 ("x86: bitops asm constraint fixes")
Simon Holm Th√łgersen [Mon, 5 May 2008 13:45:28 +0000]
x86: revert commit 709f744 ("x86: bitops asm constraint fixes")

709f744 causes my computer to freeze during the start up of X and my
login manger (GDM). It gets to the point where it has shown the default
X mouse cursor logo (a big X / cross) and does not respond to anything
from that point on.

This worked fine before 709f744, and it works fine with \177377709f744
reverted on top of Linus' current tree (f74d505). The revert had
conflicts, as far as I can tell due to white space changes. The diff I
ended up with is below.

It is 100% reproducible.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

13 years agox86: restrict keyboard io ports reservation to make ipmi driver work
Helge Wagner [Tue, 29 Apr 2008 12:20:40 +0000]
x86: restrict keyboard io ports reservation to make ipmi driver work

On some of our (single board computer) boards (x86) we are using an
IPMI controller that uses I/O ports 0x62 and 0x66 for a KCS (keyboard
controller style) IPMI system interface.

Trying to load the openipmi driver fails, because the ports
(0x62/0x66) are reserved for keyboard. keyboard reserves the full
range 0x60-0x6F while it doesn't need to.

Reserve only ports 0x60 and 0x64 for the legacy PS/2 i8042 keyboad
controller instead of 0x60-0x6F to allow the openipmi driver to work.

[ tglx: added 64bit fixup ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

13 years agox86: fix fpu restore from sig return
Suresh Siddha [Wed, 7 May 2008 19:09:52 +0000]
x86: fix fpu restore from sig return

If the task never used fpu, initialize the fpu before restoring the FP
state from the signal handler context. This will allocate the fpu
state, if the task never needed it before.

Reported-and-bisected-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Frederik Deweerdt <deweerdt@free.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

13 years agox86: remove spew print out about bus to node mapping
Yinghai Lu [Sun, 4 May 2008 20:41:02 +0000]
x86: remove spew print out about bus to node mapping

Jeff Garzik pointed out that this printout is not needed.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

13 years agox86: revert printk format warning change which is for linux-next
Thomas Gleixner [Thu, 8 May 2008 14:38:11 +0000]
x86: revert printk format warning change which is for linux-next

commit 62179849b40aded9e727cca5006627a1c4d6446e
    x86: fix setup printk format warning

is for linux-next and not for .26

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

13 years agosparc32: Don't twiddle PT_DTRACE in exec.
David S. Miller [Sat, 10 May 2008 07:31:28 +0000]
sparc32: Don't twiddle PT_DTRACE in exec.

That bit isn't used on this platform.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years agoMerge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/nico/orion...
Russell King [Fri, 9 May 2008 22:24:09 +0000]
Merge branch 'for-rmk' of git://git./linux/kernel/git/nico/orion into fixes

13 years ago[ARM] 5033/1: Unbreak corgi_ssp by registering ssp drivers earlier.
Dmitry Baryshkov [Fri, 9 May 2008 07:56:54 +0000]
[ARM] 5033/1: Unbreak corgi_ssp by registering ssp drivers earlier.

A lot of stuff in spitz/akita/etc. depends on corgi_ssp to be initialised
early. However corgi_ssp initialisation fails, because at that time pxa*-ssp
devices don't have drivers. Move ssp earlier in the makefile so they are
registered before corgi-ssp.

Also move sleep/suspend and cpu-freq to more logical places

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[libata] revert new check-ready Status register logic
Jeff Garzik [Fri, 9 May 2008 19:00:55 +0000]
[libata] revert new check-ready Status register logic

This behavior differs across multiple controllers, so we cannot use
common logic for all controllers.

Revert back to the basic common behavior, and specific drivers will
be updated from here to take into account the unusual Status return
values.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Fri, 9 May 2008 17:34:00 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (21 commits)
  Blackfin Serial Driver: abstract away DLAB differences into header
  Blackfin Serial Driver: macro away the IER differences between processors
  [Blackfin] arch: remove useless IRQ_SW_INT defines
  [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined
  [Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets mainlined
  [Blackfin] arch: add EBIU supporting for BF54x EZKIT SMSC LAN911x/LAN921x families embedded ethernet driver
  [Blackfin] arch: Set spi flash partition on bf527 as like bf548.
  [Blackfin] arch: fix bug - Remove module will not free L1 memory used
  [Blackfin] arch: fix wrong header name in comment
  [Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mount
  [Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkit
  [Blackfin] arch: Add physmap partition for BF527-EZkit
  [Blackfin] arch: fix gdb testing regression
  [Blackfin] arch: disable single stepping when delivering a signal
  [Blackfin] arch: Delete unused (copied from m68k) entries in asm-offsets.c.
  [Blackfin] arch: In the double fault handler, set up the PT_RETI slot
  [Blackfin] arch: Support for CPU_FREQ and NOHZ
  [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support
  [Blackfin] arch: fix bug -  breaking the atomic sections code.
  [Blackfin] arch: Equalize include files: Add VR_CTL masks
  ...

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Fri, 9 May 2008 15:10:09 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] fix build warning
  [CIFS] Fixed build warning in is_ip
  [CIFS] cleanup cifsd completion
  [CIFS] Remove over-indented code in find_unc().
  [CIFS] fix typo
  [CIFS] Remove duplicate call to mode_to_acl
  [CIFS] convert usage of implicit booleans to bool
  [CIFS] fixed compatibility issue with samba refferal request
  [CIFS] Fix statfs formatting
  [CIFS] Adds to dns_resolver checking if the server name is an IP addr and skipping upcall in this case.
  [CIFS] Fix spelling mistake
  [CIFS] Update cifs version number

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Fri, 9 May 2008 15:07:58 +0000]
Merge git://git./linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (37 commits)
  SH: catch negative denormal_subf1() retval in denormal_add()
  sh: Fix DMAC base address for SH7709S
  sh: update smc91x platform data for se7206.
  sh: Stub in cpu_to_node() and friends for NUMA build.
  sh: intc register modify fix
  sh: no high level trigger on some sh3 cpus
  sh: clean up sh7710 and sh7720 intc tables
  sh: add interrupt ack code to sh3
  sh: unify external irq pin code for sh3
  sh-sci: avoid writing to nonexistent registers
  sh-sci: sh7722 lacks scsptr registers
  sh-sci: improve sh7722 support
  sh: reset hardware from early printk
  sh: drain and wait for early printk
  sh: use sci_out() for early printk
  sh: add memory resources to /proc/iomem
  sh: add kernel bss resource
  sh: fix sh7705 interrupt vector typo
  sh: update smc91x platform data for se7722
  sh: update smc91x platform data for MigoR
  ...

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Fri, 9 May 2008 15:07:21 +0000]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] hmac: Avoid calling virt_to_page on key

13 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Fri, 9 May 2008 15:06:31 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (23 commits)
  [POWERPC] Remove leftover printk in isa-bridge.c
  [POWERPC] Remove duplicate #include
  [POWERPC] Initialize lockdep earlier
  [POWERPC] Document when printk is useable
  [POWERPC] Fix bogus paca->_current initialization
  [POWERPC] Fix of_i2c include for module compilation
  [POWERPC] Make default cputable entries reflect selected CPU family
  [POWERPC] spufs: lockdep annotations for spufs_dir_close
  [POWERPC] spufs: don't requeue victim contex in find_victim if it's not in spu_run
  [POWERPC] 4xx: Fix PCI mem in sequoia DTS
  [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver
  [POWERPC] 4xx: Fix problem with new TLB storage attibute fields on 440x6 core
  [POWERPC] spufs: spu_create should send inotify IM_CREATE event
  [POWERPC] spufs: handle faults while the context switch pending flag is set
  [POWERPC] spufs: fix concurrent delivery of class 0 & 1 exceptions
  [POWERPC] spufs: try to route SPU interrupts to local node
  [POWERPC] spufs: set SPU_CONTEXT_SWITCH_PENDING before synchronising SPU irqs
  [POWERPC] spufs: don't acquire state_mutex interruptible while performing callback
  [POWERPC] spufs: update master runcntl with context lock held
  [POWERPC] spufs: fix post-stopped update of MFC_CNTL register
  ...

13 years agom32r: use generic sys_pipe
Christoph Hellwig [Fri, 9 May 2008 12:44:02 +0000]
m32r: use generic sys_pipe

m32r can use the generic sys_pipe implementation.

The current sys_pipe implementation on m32r only differes from the
generic one by passing a lot of additional unused registers to sys_pipe.

Reviewed and tested by Hirokazu Takata.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agocris: kill sys_pipe implementation
Christoph Hellwig [Fri, 9 May 2008 10:41:17 +0000]
cris: kill sys_pipe implementation

The cris implementation of sys_pipe only differs from the generic one
by taking the BKL before calling do_pipe which isn't not nessecary.

Just kill the cris implementation and use the generic one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 9 May 2008 15:01:19 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  sit: Add missing kfree_skb() on pskb_may_pull() failure.
  tipc: Increase buffer header to support worst-case device

13 years agomodule: don't ignore vermagic string if module doesn't have modversions
Rusty Russell [Fri, 9 May 2008 06:25:28 +0000]
module: don't ignore vermagic string if module doesn't have modversions

Linus found a logic bug: we ignore the version number in a module's
vermagic string if we have CONFIG_MODVERSIONS set, but modversions
also lets through a module with no __versions section for modprobe
--force (with tainting, but still).

We should only ignore the start of the vermagic string if the module
actually *has* crcs to check.  Rather than (say) having an
entertaining hissy fit and creating a config option to work around the
buggy code.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agomodule: be more picky about allowing missing module versions
Rusty Russell [Fri, 9 May 2008 06:24:21 +0000]
module: be more picky about allowing missing module versions

We allow missing __versions sections, because modprobe --force strips
it.  It makes less sense to allow sections where there's no version
for a specific symbol the module uses, so disallow that.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agomodule: put modversions in vermagic
Rusty Russell [Fri, 9 May 2008 06:23:17 +0000]
module: put modversions in vermagic

Don't allow a module built without versions altogether to be inserted
into a kernel which expects modversions.

modprobe --force will strip vermagic as well as modversions, so it
won't be effected, but this will make sure that a
non-CONFIG_MODVERSIONS module won't be accidentally inserted into a
CONFIG_MODVERSIONS kernel.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years ago[ARM] Orion: clean up addr-map.c after window setting code purge
Lennert Buytenhek [Sat, 26 Apr 2008 18:48:11 +0000]
[ARM] Orion: clean up addr-map.c after window setting code purge

This patch cleans up Orion's addr-map.c a bit after all peripheral
window programming code has been moved out into the relevant drivers.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

13 years ago[ARM] Orion: pass proper t_clk into mv643xx_eth
Lennert Buytenhek [Sat, 26 Apr 2008 18:48:11 +0000]
[ARM] Orion: pass proper t_clk into mv643xx_eth

Pass the Orion TCLK tick rate into the ethernet driver.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

13 years ago[ARM] Orion: use mv643xx_eth driver mbus window handling
Lennert Buytenhek [Sat, 26 Apr 2008 18:48:11 +0000]
[ARM] Orion: use mv643xx_eth driver mbus window handling

Make the Orion 5x platform code use the mbus window handling code
that's in the mv643xx_eth driver, instead of programming the GigE
block's mbus window registers by hand.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

13 years agoSH: catch negative denormal_subf1() retval in denormal_add()
Roel Kluin [Fri, 9 May 2008 11:05:10 +0000]
SH: catch negative denormal_subf1() retval in denormal_add()

'ix' is unsigned but denormal_subf1() may return a negative int.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

13 years ago[POWERPC] Remove leftover printk in isa-bridge.c
Nate Case [Thu, 8 May 2008 16:41:17 +0000]
[POWERPC] Remove leftover printk in isa-bridge.c

This printk() appears twice in the same function.  Only the latter one
in the inval_range: section appears to be legitimate.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years ago[POWERPC] Remove duplicate #include
Huang Weiyi [Thu, 8 May 2008 13:34:29 +0000]
[POWERPC] Remove duplicate #include

Remove duplicate #include of <asm/prom.h> in
arch/powerpc/kernel/btext.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years ago[POWERPC] Initialize lockdep earlier
Benjamin Herrenschmidt [Wed, 7 May 2008 00:25:34 +0000]
[POWERPC] Initialize lockdep earlier

This moves lockdep_init() to before udbg_early_init() as the later
can call things that acquire spinlocks etc...  This also makes printk
safer to use earlier.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years ago[POWERPC] Document when printk is useable
Benjamin Herrenschmidt [Wed, 7 May 2008 00:00:56 +0000]
[POWERPC] Document when printk is useable

When debugging early boot problems, it's common to sprinkle printk's
all over the place.  However, on 64-bit powerpc, this can lead to
memory corruption if done too early due to the PACA pointer and
lockdep core not being initialized.

This adds some comments to early_setup() that document when it is
safe to do so in order to save time for whoever has to debug that
stuff next.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years ago[POWERPC] Fix bogus paca->_current initialization
Benjamin Herrenschmidt [Wed, 7 May 2008 00:00:55 +0000]
[POWERPC] Fix bogus paca->_current initialization

When doing lockdep, I had two patches to initialize paca->_current
early, one bogus, and one correct.  Unfortunately both got merged
as the bad one ended up being part of the main lockdep patch by
mistake.  This causes memory corruption at boot.  This removes
the offending code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years ago[POWERPC] Fix of_i2c include for module compilation
Jochen Friedrich [Tue, 6 May 2008 18:40:01 +0000]
[POWERPC] Fix of_i2c include for module compilation

Remove #ifdef CONFIG_OF_I2C as this breaks module compilation.
Drivers using this header should depend on OF_I2C anyways, so
there's no need to make this conditional.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years ago[POWERPC] Make default cputable entries reflect selected CPU family
Benjamin Herrenschmidt [Mon, 5 May 2008 05:22:27 +0000]
[POWERPC] Make default cputable entries reflect selected CPU family

Changes the cputable so that various CPU families that have an exclusive
CONFIG_ option have a more sensible default entry to use if the specific
processor hasn't been identified.

This makes the kernel more generally useful when booted on an unknown
PVR for things like new 4xx variants.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13 years agoMerge branch 'for-2.6.26' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer...
Paul Mackerras [Fri, 9 May 2008 10:12:06 +0000]
Merge branch 'for-2.6.26' of /linux/kernel/git/jwboyer/powerpc-4xx into merge

13 years agosh: Fix DMAC base address for SH7709S
Steve Glendinning [Tue, 6 May 2008 10:36:27 +0000]
sh: Fix DMAC base address for SH7709S

On SH7709S, DMAC can be found at 0xa4000020 (as with most of
the other sh3 cpu subtypes).

Split out definition of DMAC base address from definitions of
DMTE irqs.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

13 years agosit: Add missing kfree_skb() on pskb_may_pull() failure.
David S. Miller [Fri, 9 May 2008 06:40:26 +0000]
sit: Add missing kfree_skb() on pskb_may_pull() failure.

Noticed by Paul Marks <paul@pmarks.net>.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years agosh: update smc91x platform data for se7206.
Paul Mundt [Fri, 9 May 2008 05:13:17 +0000]
sh: update smc91x platform data for se7206.

Follows the se7722 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

13 years agotipc: Increase buffer header to support worst-case device
Allan Stephens [Fri, 9 May 2008 04:38:24 +0000]
tipc: Increase buffer header to support worst-case device

This patch increases the headroom TIPC reserves in each sk_buff
to accommodate the largest possible link level device header.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years agosparc video: remove open boot prom code
Robert Reif [Fri, 9 May 2008 04:37:30 +0000]
sparc video: remove open boot prom code

Replace remaining open boot prom code with of.

Boot tested on sparc32 and compile tested on sparc64.

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[CIFS] fix build warning
Steve French [Fri, 9 May 2008 03:48:05 +0000]
[CIFS] fix build warning

Signed-off-by: Steve French <sfrench@us.ibm.com>

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 9 May 2008 02:03:26 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  net: Added ASSERT_RTNL() to dev_open() and dev_close().
  can: Fix can_send() handling on dev_queue_xmit() failures
  netns: Fix arbitrary net_device-s corruptions on net_ns stop.
  netfilter: Kconfig: default DCCP/SCTP conntrack support to the protocol config values
  netfilter: nf_conntrack_sip: restrict RTP expect flushing on error to last request
  macvlan: Fix memleak on device removal/crash on module removal
  net/ipv4: correct RFC 1122 section reference in comment
  tcp FRTO: SACK variant is errorneously used with NewReno
  e1000e: don't return half-read eeprom on error
  ucc_geth: Don't use RX clock as TX clock.
  cxgb3: Use CAP_SYS_RAWIO for firmware
  pcnet32: delete non NAPI code from driver.
  fs_enet: Fix a memory leak in fs_enet_mdio_probe
  [netdrvr] eexpress: IPv6 fails - multicast problems
  3c59x: use netstats in net_device structure
  3c980-TX needs EXTRA_PREAMBLE
  fix warning in drivers/net/appletalk/cops.c
  e1000e: Add support for BM PHYs on ICH9
  uli526x: fix endianness issues in the setup frame
  uli526x: initialize the hardware prior to requesting interrupts
  ...

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Fri, 9 May 2008 02:03:19 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix SA_ONSTACK signal handling.

13 years agoRevert "PCI: remove default PCI expansion ROM memory allocation"
Linus Torvalds [Fri, 9 May 2008 01:41:48 +0000]
Revert "PCI: remove default PCI expansion ROM memory allocation"

This reverts commit 9f8daccaa05c14e5643bdd4faf5aed9cc8e6f11e, which was
reported to break X startup (xf86-video-ati-6.8.0). See

http://bugs.freedesktop.org/show_bug.cgi?id=15523

for details.

Reported-by: Laurence Withers <l@lwithers.me.uk>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years ago[CIFS] Fixed build warning in is_ip
Igor Mammedov [Thu, 8 May 2008 20:48:42 +0000]
[CIFS] Fixed build warning in is_ip

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux...
Linus Torvalds [Thu, 8 May 2008 18:31:07 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mingo/linux-2.6-sched-fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-fixes:
  sched: fix weight calculations
  semaphore: fix

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Thu, 8 May 2008 17:58:45 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  [ALSA] soc at91 minor bug fixes
  [ALSA] soc - at91-pcm - Fix line wrapping
  pcspkr: fix dependancies

13 years agoRemove duplicated include in net/sunrpc/svc.c
Huang Weiyi [Thu, 8 May 2008 14:48:31 +0000]
Remove duplicated include in net/sunrpc/svc.c

<linux/sched.h> we included twice.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agofs/proc/task_mmu.c: remove duplicated include files
Huang Weiyi [Thu, 8 May 2008 14:36:27 +0000]
fs/proc/task_mmu.c: remove duplicated include files

Removed duplicated include files <linux/ptrace.h> and <linux/seq_file.h> in
fs/proc/task_mmu.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoFix drivers/media build for modular builds
Ingo Molnar [Wed, 30 Apr 2008 07:48:07 +0000]
Fix drivers/media build for modular builds

Fix allmodconfig build bug introduced in latest -git by commit
7c91f0624a9 ("V4L/DVB(7767): Move tuners to common/tuners"):

  LD      kernel/built-in.o
  LD      drivers/built-in.o
  ld: drivers/media/built-in.o: No such file: No such file or directory

which happens if all media drivers are modular:

  http://redhat.com/~mingo/misc/config-Wed_Apr_30_09_24_48_CEST_2008.bad

In that case there's no obj-y rule connecting all the built-in.o files and
the link tree breaks.

The fix is to add a guaranteed obj-y rule for the core vmlinux to build.
(which results in an empty object file if all media drivers are modular)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Thu, 8 May 2008 17:50:34 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Wait for async events to finish before destroying QP
  IB/ipath: Fix SDMA error recovery in absence of link status change
  IB/ipath: Need to always request and handle PIO avail interrupts
  IB/ipath: Fix count of packets received by kernel
  IB/ipath: Return the correct opcode for RDMA WRITE with immediate
  IB/ipath: Fix bug that can leave sends disabled after freeze recovery
  IB/ipath: Only increment SSN if WQE is put on send queue
  IB/ipath: Only warn about prototype chip during init
  RDMA/cxgb3: Fix severe limit on userspace memory registration size
  RDMA/cxgb3: Don't add PBL memory to gen_pool in chunks

13 years agoMN10300: Make cpu_relax() invoke barrier()
David Howells [Wed, 7 May 2008 14:31:54 +0000]
MN10300: Make cpu_relax() invoke barrier()

Make cpu_relax() invoke barrier() to be the same as other arches.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Thu, 8 May 2008 17:48:36 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "relay: fix splice problem"
  docbook: fix bio missing parameter
  block: use unitialized_var() in bio_alloc_bioset()
  block: avoid duplicate calls to get_part() in disk stat code
  cfq-iosched: make io priorities inherit CPU scheduling class as well as nice
  block: optimize generic_unplug_device()
  block: get rid of likely/unlikely predictions in merge logic
  vfs: splice remove_suid() cleanup
  cfq-iosched: fix RCU race in the cfq io_context destructor handling
  block: adjust tagging function queue bit locking
  block: sysfs store function needs to grab queue_lock and use queue_flag_*()

13 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Thu, 8 May 2008 17:48:03 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Fix memory corruption when fs mounted with noadinicb option
  udf: Make udf exportable
  udf: fs/udf/partition.c:udf_get_pblock() mustn't be inline

13 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Thu, 8 May 2008 17:47:39 +0000]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] guest page hinting light
  [S390] tty3270: fix put_char fail/success conversion.
  [S390] compat ptrace cleanup
  [S390] s390mach compile warning
  [S390] cio: Fix parsing mechanism for blacklisted devices.
  [S390] cio: Remove cio_msg kernel parameter.
  [S390] s390-kvm: leave sie context on work. Removes preemption requirement
  [S390] s390: Optimize user and work TIF check

13 years agodrivers/scsi/dpt_i2o.c: fix build on alpha
Andrew Morton [Wed, 7 May 2008 03:42:42 +0000]
drivers/scsi/dpt_i2o.c: fix build on alpha

alpha:

drivers/scsi/dpt_i2o.c:1997: error: implicit declaration of function 'adpt_alpha_info'
drivers/scsi/dpt_i2o.c: At top level:
drivers/scsi/dpt_i2o.c:2032: warning: conflicting types for 'adpt_alpha_info'
drivers/scsi/dpt_i2o.c:2032: error: static declaration of 'adpt_alpha_info' follows non-static declaration
drivers/scsi/dpt_i2o.c:1997: error: previous implicit declaration of 'adpt_alpha_info' was here

Due to a copy-n-paste error in drivers/scsi/dpti.h.

Fix that up and remove some of the many daft static-declarations-in-a-header
which this driver enjoys.

Cc: Miquel van Smoorenburg <miquels@cistron.nl>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoFix cpuset sched_relax_domain_level control file
Paul Menage [Wed, 7 May 2008 03:42:41 +0000]
Fix cpuset sched_relax_domain_level control file

Due to a merge conflict, the sched_relax_domain_level control file was marked
as being handled by cpuset_read/write_u64, but the code to handle it was
actually in cpuset_common_file_read/write.

Since the value being written/read is in fact a signed integer, it should be
treated as such; this patch adds cpuset_read/write_s64 functions, and uses
them to handle the sched_relax_domain_level file.

With this patch, the sched_relax_domain_level can be read and written, and the
correct contents seen/updated.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoslub: fix atomic usage in any_slab_objects()
Benjamin Herrenschmidt [Wed, 7 May 2008 03:42:39 +0000]
slub: fix atomic usage in any_slab_objects()

any_slab_objects() does an atomic_read on an atomic_long_t, this
fixes it to use atomic_long_read instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agosys_pipe(): fix file descriptor leaks
Ulrich Drepper [Wed, 7 May 2008 03:42:38 +0000]
sys_pipe(): fix file descriptor leaks

Remember to close the files if copy_to_user() failed.

Spotted by dm.n9107@gmail.com.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: DM <dm.n9107@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agovt: fix canonical input in UTF-8 mode
Samuel Thibault [Wed, 7 May 2008 03:42:37 +0000]
vt: fix canonical input in UTF-8 mode

For e.g.  proper TTY canonical support, IUTF8 termios flag has to be set as
appropriate.  Linux used to not care about setting that flag for VT TTYs.

This patch fixes that by activating it according to the current mode of the
VT, and sets the default value according to the vt.default_utf8 parameter.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agousb/asix: add Buffalo LUA-U2-GT 10/100/1000
Mattia Dongili [Wed, 7 May 2008 03:42:35 +0000]
usb/asix: add Buffalo LUA-U2-GT 10/100/1000

The USB net adapter Buffalo LUA-U2-GT (0411:006e) carries a AX88178 chip.
Tested on the above HW.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Acked-off-by: David Hollis <dhollis@davehollis.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agosx.c: fix printk warnings on sparc32
Andrew Morton [Wed, 7 May 2008 03:42:35 +0000]
sx.c: fix printk warnings on sparc32

drivers/char/sx.c: In function 'sx_set_real_termios':
drivers/char/sx.c:973: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'long unsigned int'
drivers/char/sx.c:999: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'tcflag_t'
drivers/char/sx.c:1012: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'tcflag_t'

sparc32 seems to use weird types for its tty things.

[ Fine by me but this is ancient debug and most of the debug in sx just
  wants deleting eventually.  - Alan ]

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agouml: fix inconsistence due to tty_operation change
WANG Cong [Wed, 7 May 2008 03:42:33 +0000]
uml: fix inconsistence due to tty_operation change

'put_char' of 'struct tty_operations' has changed from 'void' into 'int'.
This can also shut up compiler warnings.

Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agomisc: fix integer as NULL pointer warnings
Harvey Harrison [Wed, 7 May 2008 03:42:32 +0000]
misc: fix integer as NULL pointer warnings

drivers/md/raid10.c:889:17: warning: Using plain integer as NULL pointer
drivers/media/video/cx18/cx18-driver.c:616:12: warning: Using plain integer as NULL pointer
sound/oss/kahlua.c:70:12: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agofix irq flags for iuu_phoenix.c
Steven Rostedt [Wed, 7 May 2008 03:42:31 +0000]
fix irq flags for iuu_phoenix.c

The file drivers/usb/serial/iuu_phoenix.c uses "int" for flags.  This can
cause hard to find bugs on some architectures.  This patch converts the flags
to use "long" instead.

This bug was discovered by doing an allyesconfig make on the -rt kernel where
checks are done to ensure all flags are of size sizeof(long).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agofix irq flags in rtc-ds1511
Steven Rostedt [Wed, 7 May 2008 03:42:30 +0000]
fix irq flags in rtc-ds1511

The file in drivers/rtc/rtc-ds1551.c uses "int" for flags.  This can cause
hard to find bugs on some architectures.  This patch converts the flags to use
"long" instead.

This bug was discovered by doing an allyesconfig make on the -rt kernel where
checks are done to ensure all flags are of size sizeof(long).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agofix irq flags in saa7134
Steven Rostedt [Wed, 7 May 2008 03:42:29 +0000]
fix irq flags in saa7134

Some files in the drivers/media/video/saa7134 directory uses "int" for flags.
This can cause hard to find bugs on some architectures.  This patch converts
the flags to use "long" instead.

This bug was discovered by doing an allyesconfig make on the -rt kernel where
checks are done to ensure all flags are of size sizeof(long).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agofix irq flags in mac80211 code
Steven Rostedt [Wed, 7 May 2008 03:42:28 +0000]
fix irq flags in mac80211 code

A file in the net/mac80211 directory uses "int" for flags.  This can cause
hard to find bugs on some architectures.  This patch converts the flags to use
"long" instead.

This bug was discovered by doing an allyesconfig make on the -rt kernel where
checks are done to ensure all flags are of size sizeof(long).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoserial: access after NULL check in uart_flush_buffer()
Tetsuo Handa [Wed, 7 May 2008 03:42:27 +0000]
serial: access after NULL check in uart_flush_buffer()

I noticed that

  static void uart_flush_buffer(struct tty_struct *tty)
  {
   struct uart_state *state = tty->driver_data;
   struct uart_port *port = state->port;
   unsigned long flags;

   /*
    * This means you called this function _after_ the port was
    * closed.  No cookie for you.
    */
   if (!state || !state->info) {
   WARN_ON(1);
   return;
   }

is too late for checking state != NULL.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoKconfig: improved help for CONFIG_ACCESSIBILITY
Samuel Thibault [Wed, 7 May 2008 03:42:26 +0000]
Kconfig: improved help for CONFIG_ACCESSIBILITY

Add a small explanation of what accessibility is.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years ago[ARM] pxa: Fix RCSR handling
Russell King [Thu, 8 May 2008 15:50:39 +0000]
[ARM] pxa: Fix RCSR handling

Related to d3930614e68bdf83a120d904c039a64e9f75dba1.

RCSR is only present on PXA2xx CPUs, not on PXA3xx CPUs.  Therefore,
we should not be unconditionally writing to RCSR from generic code.

Since we now clear the RCSR status from the SoC specific PXA PM code
and before reset in the arch_reset() function, the duplication in
the corgi, poodle, spitz and tosa code can be removed.

Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years agosched: fix weight calculations
Mike Galbraith [Thu, 8 May 2008 15:00:42 +0000]
sched: fix weight calculations

The conversion between virtual and real time is as follows:

  dvt = rw/w * dt <=> dt = w/rw * dvt

Since we want the fair sleeper granularity to be in real time, we actually
need to do:

  dvt = - rw/w * l

This bug could be related to the regression reported by Yanmin Zhang:

| Comparing with kernel 2.6.25, sysbench+mysql(oltp, readonly) has lots
| of regressions with 2.6.26-rc1:
|
| 1) 8-core stoakley: 28%;
| 2) 16-core tigerton: 20%;
| 3) Itanium Montvale: 50%.

Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

13 years agosemaphore: fix
Ingo Molnar [Thu, 8 May 2008 09:53:48 +0000]
semaphore: fix

Yanmin Zhang reported:

| Comparing with kernel 2.6.25, \177377AIM7 (use tmpfs) has \177377more th
| regression under 2.6.26-rc1 on my 8-core stoakley, 16-core tigerton,
| and Itanium Montecito. Bisect located the patch below:
|
64ac24e738823161693bf791f87adc802cf529ff is first bad commit
| commit 64ac24e738823161693bf791f87adc802cf529ff
| Author: Matthew Wilcox <matthew@wil.cx>
| Date:   Fri Mar 7 21:55:58 2008 -0500
|
|     Generic semaphore implementation
|
| After I manually reverted the patch against 2.6.26-rc1 while fixing
| lots of conflicts/errors, aim7 regression became less than 2%.

i reproduced the AIM7 workload and can confirm Yanmin's findings that
-.26-rc1 regresses over .25 - by over 67% here.

Looking at the workload i found and fixed what i believe to be the real
bug causing the AIM7 regression: it was inefficient wakeup / scheduling
/ locking behavior of the new generic semaphore code, causing suboptimal
performance.

The problem comes from the following code. The new semaphore code does
this on down():

        spin_lock_irqsave(&sem->lock, flags);
        if (likely(sem->count > 0))
                sem->count--;
        else
                __down(sem);
        spin_unlock_irqrestore(&sem->lock, flags);

and this on up():

        spin_lock_irqsave(&sem->lock, flags);
        if (likely(list_empty(&sem->wait_list)))
                sem->count++;
        else
                __up(sem);
        spin_unlock_irqrestore(&sem->lock, flags);

where __up() does:

        list_del(&waiter->list);
        waiter->up = 1;
        wake_up_process(waiter->task);

and where __down() does this in essence:

        list_add_tail(&waiter.list, &sem->wait_list);
        waiter.task = task;
        waiter.up = 0;
        for (;;) {
                [...]
                spin_unlock_irq(&sem->lock);
                timeout = schedule_timeout(timeout);
                spin_lock_irq(&sem->lock);
                if (waiter.up)
                        return 0;
        }

the fastpath looks good and obvious, but note the following property of
the contended path: if there's a task on the ->wait_list, the up() of
the current owner will "pass over" ownership to that waiting task, in a
wake-one manner, via the waiter->up flag and by removing the waiter from
the wait list.

That is all and fine in principle, but as implemented in
kernel/semaphore.c it also creates a nasty, hidden source of contention!

The contention comes from the following property of the new semaphore
code: the new owner owns the semaphore exclusively, even if it is not
running yet.

So if the old owner, even if just a few instructions later, does a
down() [lock_kernel()] again, it will be blocked and will have to wait
on the new owner to eventually be scheduled (possibly on another CPU)!
Or if another task gets to lock_kernel() sooner than the "new owner"
scheduled, it will be blocked unnecessarily and for a very long time
when there are 2000 tasks running.

I.e. the implementation of the new semaphores code does wake-one and
lock ownership in a very restrictive way - it does not allow
opportunistic re-locking of the lock at all and keeps the scheduler from
picking task order intelligently.

This kind of scheduling, with 2000 AIM7 processes running, creates awful
cross-scheduling between those 2000 tasks, causes reduced parallelism, a
throttled runqueue length and a lot of idle time. With increasing number
of CPUs it causes an exponentially worse behavior in AIM7, as the chance
for a newly woken new-owner task to actually run anytime soon is less
and less likely.

Note that it takes just a tiny bit of contention for the 'new-semaphore
catastrophy' to happen: the wakeup latencies get added to whatever small
contention there is, and quickly snowball out of control!

I believe Yanmin's findings and numbers support this analysis too.

The best fix for this problem is to use the same scheduling logic that
the kernel/mutex.c code uses: keep the wake-one behavior (that is OK and
wanted because we do not want to over-schedule), but also allow
opportunistic locking of the lock even if a wakee is already "in
flight".

The patch below implements this new logic. With this patch applied the
AIM7 regression is largely fixed on my quad testbox:

  # v2.6.25 vanilla:
  ..................
  Tasks   Jobs/Min        JTI     Real    CPU     Jobs/sec/task
  2000    56096.4         91      207.5   789.7   0.4675
  2000    55894.4         94      208.2   792.7   0.4658

  # v2.6.26-rc1-166-gc0a1811 vanilla:
  ...................................
  Tasks   Jobs/Min        JTI     Real    CPU     Jobs/sec/task
  2000    33230.6         83      350.3   784.5   0.2769
  2000    31778.1         86      366.3   783.6   0.2648

  # v2.6.26-rc1-166-gc0a1811 + semaphore-speedup:
  ...............................................
  Tasks   Jobs/Min        JTI     Real    CPU     Jobs/sec/task
  2000    55707.1         92      209.0   795.6   0.4642
  2000    55704.4         96      209.0   796.0   0.4642

i.e. a 67% speedup. We are now back to within 1% of the v2.6.25
performance levels and have zero idle time during the test, as expected.

Btw., interactivity also improved dramatically with the fix - for
example console-switching became almost instantaneous during this
workload (which after all is running 2000 tasks at once!), without the
patch it was stuck for a minute at times.

There's another nice side-effect of this speedup patch, the new generic
semaphore code got even smaller:

   text    data     bss     dec     hex filename
   1241       0       0    1241     4d9 semaphore.o.before
   1207       0       0    1207     4b7 semaphore.o.after

(because the waiter.up complication got removed.)

Longer-term we should look into using the mutex code for the generic
semaphore code as well - but i's not easy due to legacies and it's
outside of the scope of v2.6.26 and outside the scope of this patch as
well.

Bisected-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

13 years agox86: cleanup PAT cpu validation
Thomas Gleixner [Thu, 8 May 2008 07:18:43 +0000]
x86: cleanup PAT cpu validation

Move the scattered checks for PAT support to a single function. Its
moved to addon_cpuid_features.c as this file is shared between 32 and
64 bit.

Remove the manipulation of the PAT feature bit and just disable PAT in
the PAT layer, based on the PAT bit provided by the CPU and the
current CPU version/model white list.

Change the boot CPU check so it works on Voyager somewhere in the
future as well :) Also panic, when a secondary has PAT disabled but
the primary one has alrady switched to PAT. We have no way to undo
that.

The white list is kept for now to ensure that we can rely on known to
work CPU types and concentrate on the software induced problems
instead of fighthing CPU erratas and subtle wreckage caused by not yet
verified CPUs. Once the PAT code has stabilized enough, we can remove
the white list and open the can of worms.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

13 years agox86: geode: define geode_has_vsa2() even if CONFIG_MGEODE_LX is not set
Andres Salomon [Wed, 7 May 2008 20:07:38 +0000]
x86: geode: define geode_has_vsa2() even if CONFIG_MGEODE_LX is not set

We want drivers to be able to use geode_has_vsa2 without having to worry
about what model geode is being compiled for.  This patch ensures that
geode_has_vsa2 is always defined.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

13 years agox86: GEODE: cache results from geode_has_vsa2() and uninline
Andres Salomon [Wed, 7 May 2008 20:07:37 +0000]
x86: GEODE: cache results from geode_has_vsa2() and uninline

This moves geode_has_vsa2 into a .c file, caches the result we get from
the VSA virtual registers, and causes the function to no longer be inline.

[akpm@linux-foundation.org: cleanup]

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

13 years agox86: revert geode config dependency
Thomas Gleixner [Thu, 8 May 2008 11:58:01 +0000]
x86: revert geode config dependency

commit e26a28d190304d910ee49b81cbfe6d9241f56e86
    x86: olpc build fix

was a fix to a patch that was withdrawn/delayed and then erroneously
commited to x86.git. Revert it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>