11 years agonet: use __packed annotation
Eric Dumazet [Thu, 3 Jun 2010 10:21:52 +0000]
net: use __packed annotation

cleanup patch.

Use new __packed annotation in net/ and include/
(except netfilter)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agodrivers/net: use __packed annotation
Eric Dumazet [Wed, 2 Jun 2010 18:10:09 +0000]
drivers/net: use __packed annotation

cleanup patch.

Use new __packed annotation in drivers/net/

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agofec: Cleanup PHY probing
Denis Kirjanov [Wed, 2 Jun 2010 09:17:00 +0000]
fec: Cleanup PHY probing

Cleanup PHY probing: use helpers from phylib

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agofec: convert TX hook to netdev_tx_t
Denis Kirjanov [Wed, 2 Jun 2010 09:15:47 +0000]
fec: convert TX hook to netdev_tx_t

Convert TX hook return value to netdev_tx_t

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: mac8390 - Sort out memory/MMIO accesses and casts
Geert Uytterhoeven [Wed, 2 Jun 2010 07:36:20 +0000]
net: mac8390 - Sort out memory/MMIO accesses and casts

commit 5c7fffd0e3b57cb63f50bbd710868f012d67654f ("drivers/net/mac8390.c: Remove
useless memcpy casting") removed too many casts, introducing the following
warnings:

| drivers/net/mac8390.c:248: warning: passing argument 1 of '__builtin_memcpy' makes pointer from integer without a cast
| drivers/net/mac8390.c:253: warning: passing argument 1 of 'word_memcpy_tocard' makes pointer from integer without a cast
| drivers/net/mac8390.c:255: warning: passing argument 2 of 'word_memcpy_fromcard' makes pointer from integer without a cast

Instead of just readding the casts,
  - move all casts inside word_memcpy_{to,from}card(),
  - replace an incorrect memcpy() by memcpy_toio(),
  - add memcmp_withio() as a wrapper around memcmp(),
  - replace an incorrect memcpy_toio() by memcpy_fromio().

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agochelsio: Remove remnants of CONFIG_CHELSIO_T1_COUGAR
Roland Dreier [Wed, 2 Jun 2010 08:04:28 +0000]
chelsio: Remove remnants of CONFIG_CHELSIO_T1_COUGAR

CONFIG_CHELSIO_T1_COUGAR cannot be set (it appears nowhere in any
Kconfig files), and the code it protects could never build (cspi.h was
never added to the kernel tree).  Therefore it's pretty safe to remove
all vestiges of this dead code.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoipv4: RCU conversion of ip_route_input_slow/ip_route_input_mc
Eric Dumazet [Wed, 2 Jun 2010 19:21:31 +0000]
ipv4: RCU conversion of ip_route_input_slow/ip_route_input_mc

Avoid two atomic ops on struct in_device refcount per incoming packet,
if slow path taken, (or route cache disabled)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoipv4: add LINUX_MIB_IPRPFILTER snmp counter
Eric Dumazet [Wed, 2 Jun 2010 12:05:27 +0000]
ipv4: add LINUX_MIB_IPRPFILTER snmp counter

Christoph Lameter mentioned that packets could be dropped in input path
because of rp_filter settings, without any SNMP counter being
incremented. System administrator can have a hard time to track the
problem.

This patch introduces a new counter, LINUX_MIB_IPRPFILTER, incremented
each time we drop a packet because Reverse Path Filter triggers.

(We receive an IPv4 datagram on a given interface, and find the route to
send an answer would use another interface)

netstat -s | grep IPReversePathFilter
    IPReversePathFilter: 21714

Reported-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoipconfig: document DHCP hostname and DNS record
Wu Fengguang [Wed, 2 Jun 2010 16:02:44 +0000]
ipconfig: document DHCP hostname and DNS record

Now it's possible to update the DNS record for $HOST_NAME with

ip=::::$HOST_NAME::dhcp

CC: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoMerge branch 'vhost-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mst...
David S. Miller [Wed, 2 Jun 2010 15:26:36 +0000]
Merge branch 'vhost-net-next' of git://git./linux/kernel/git/mst/vhost

11 years agonet: replace hooks in __netif_receive_skb V5
Jiri Pirko [Tue, 1 Jun 2010 21:52:08 +0000]
net: replace hooks in __netif_receive_skb V5

What this patch does is it removes two receive frame hooks (for bridge and for
macvlan) from __netif_receive_skb. These are replaced them with a single
hook for both. It only supports one hook per device because it makes no
sense to do bridging and macvlan on the same device.

Then a network driver (of virtual netdev like macvlan or bridge) can register
an rx_handler for needed net device.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoipv6: Refactor update of IPv6 flowi destination address for srcrt (RH) option
Arnaud Ebalard [Tue, 1 Jun 2010 21:35:01 +0000]
ipv6: Refactor update of IPv6 flowi destination address for srcrt (RH) option

There are more than a dozen occurrences of following code in the
IPv6 stack:

    if (opt && opt->srcrt) {
            struct rt0_hdr *rt0 = (struct rt0_hdr *) opt->srcrt;
            ipv6_addr_copy(&final, &fl.fl6_dst);
            ipv6_addr_copy(&fl.fl6_dst, rt0->addr);
            final_p = &final;
    }

Replace those with a helper. Note that the helper overrides final_p
in all cases. This is ok as final_p was previously initialized to
NULL when declared.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomac8390: raise error logging priority
Finn Thain [Wed, 2 Jun 2010 14:06:34 +0000]
mac8390: raise error logging priority

Log error conditions using KERN_ERR priority.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoipconfig: send host-name in DHCP requests
Wu Fengguang [Sun, 30 May 2010 17:19:53 +0000]
ipconfig: send host-name in DHCP requests

Normally dhclient can be configured to send the "host-name" option
in DHCP requests to update the client's DNS record. However for an
NFSROOT system, dhclient shall never be called (which may change the
IP addr and therefore lose your root NFS mount connection).

So enable updating the DNS record with kernel parameter

ip=::::$HOST_NAME::dhcp

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agopacket_mmap: expose hw packet timestamps to network packet capture utilities
Scott McMillan [Wed, 2 Jun 2010 12:53:56 +0000]
packet_mmap: expose hw packet timestamps to network packet capture utilities

This patch adds a setting, PACKET_TIMESTAMP, to specify the packet
timestamp source that is exported to capture utilities like tcpdump by
packet_mmap.

PACKET_TIMESTAMP accepts the same integer bit field as
SO_TIMESTAMPING.  However, only the SOF_TIMESTAMPING_SYS_HARDWARE and
SOF_TIMESTAMPING_RAW_HARDWARE values are currently recognized by
PACKET_TIMESTAMP.  SOF_TIMESTAMPING_SYS_HARDWARE takes precedence over
SOF_TIMESTAMPING_RAW_HARDWARE if both bits are set.

If PACKET_TIMESTAMP is not set, a software timestamp generated inside
the networking stack is used (the behavior before this setting was
added).

Signed-off-by: Scott McMillan <scott.a.mcmillan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agovxge: Fix checkstack warning in vxge_probe()
Prarit Bhargava [Wed, 2 Jun 2010 12:51:19 +0000]
vxge: Fix checkstack warning in vxge_probe()

Linux 2.6.33 reports this checkstack warning:

drivers/net/vxge/vxge-main.c: In function 'vxge_probe':
drivers/net/vxge/vxge-main.c:4409: warning: the frame size of 1028 bytes is larger than 1024 bytes

This warning does not occur in the latest linux-2.6 or linux-next, however,
when I do a 'make -j32 CONFIG_FRAME_WARN=512' instead of 1024 I see

drivers/net/vxge/vxge-main.c: In function ‘vxge_probe’:
drivers/net/vxge/vxge-main.c:4423: warning: the frame size of 1024 bytes is larger than 512 bytes

This patch moves the large vxge_config struct off the stack.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: CONFIG_NET_NS reduction
Eric Dumazet [Tue, 1 Jun 2010 06:51:19 +0000]
net: CONFIG_NET_NS reduction

Use read_pnet() and write_pnet() to reduce number of ifdef CONFIG_NET_NS

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoppp: eliminate shadowed variable name
stephen hemminger [Tue, 1 Jun 2010 06:05:46 +0000]
ppp: eliminate shadowed variable name

Sparse complains about shadowed declaration of skb. So use other
name.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomac8390: propagate error code from request_irq
Finn Thain [Tue, 1 Jun 2010 02:18:32 +0000]
mac8390: propagate error code from request_irq

Use the request_irq() error code as the return value for mac8390_open().
EAGAIN doesn't make sense for Nubus slot IRQs. Only this driver can claim
this IRQ (until the NIC is removed, which means everything is powered
down).

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agocaif: add newlines after declarations in caif_serial.c
Dan Carpenter [Mon, 31 May 2010 21:09:33 +0000]
caif: add newlines after declarations in caif_serial.c

I added newlines after the declarations in caif_serial.c.  This is
normal kernel style, although I can't see anywhere it's documented.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agocaif: remove unneeded variable from caif_net_open()
Dan Carpenter [Mon, 31 May 2010 21:08:55 +0000]
caif: remove unneeded variable from caif_net_open()

We don't use the "ser" variable so I've removed it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: add additional lock to qdisc to increase throughput
Eric Dumazet [Wed, 2 Jun 2010 12:09:29 +0000]
net: add additional lock to qdisc to increase throughput

When many cpus compete for sending frames on a given qdisc, the qdisc
spinlock suffers from very high contention.

The cpu owning __QDISC_STATE_RUNNING bit has same priority to acquire
the lock, and cannot dequeue packets fast enough, since it must wait for
this lock for each dequeued packet.

One solution to this problem is to force all cpus spinning on a second
lock before trying to get the main lock, when/if they see
__QDISC_STATE_RUNNING already set.

The owning cpu then compete with at most one other cpu for the main
lock, allowing for higher dequeueing rate.

Based on a previous patch from Alexander Duyck. I added the heuristic to
avoid the atomic in fast path, and put the new lock far away from the
cache line used by the dequeue worker. Also try to release the busylock
lock as late as possible.

Tests with following script gave a boost from ~50.000 pps to ~600.000
pps on a dual quad core machine (E5450 @3.00GHz), tg3 driver.
(A single netperf flow can reach ~800.000 pps on this platform)

for j in `seq 0 3`; do
  for i in `seq 0 7`; do
    netperf -H 192.168.0.1 -t UDP_STREAM -l 60 -N -T $i -- -m 6 &
  done
done

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobonding: optimize tlb_get_least_loaded_slave
Jiri Pirko [Wed, 19 May 2010 03:26:39 +0000]
bonding: optimize tlb_get_least_loaded_slave

In the worst case, when the first loop breaks an the end of the slave list,
the slave list is iterated through twice. This patch reduces this
function only to one loop. Also makes it simpler.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobonding: remove unused original_flags struct slave member
Jiri Pirko [Wed, 19 May 2010 01:17:41 +0000]
bonding: remove unused original_flags struct slave member

This is stored but never restored. So remove this as it is useless.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobonding: move dev_addr cpy to bond_enslave
Jiri Pirko [Wed, 19 May 2010 01:14:29 +0000]
bonding: move dev_addr cpy to bond_enslave

Move the code that copies slave's mac address in case that's the first slave into
bond_enslave. Ifenslave app does this also but that's not a problem. This is
something that should be done in bond_enslave, and it shound not matter from
where is it called.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet/mpc52xx_phy: Various code cleanups
Wolfram Sang [Wed, 2 Jun 2010 10:45:22 +0000]
net/mpc52xx_phy: Various code cleanups

- don't free bus->irq (obsoleted by ca816d98170942371535b3e862813b0aba9b7d90)
- don't dispose irqs (should be done in of_mdiobus_register())
- use fec-pointer consistently in transfer()
- use resource_size()
- cosmetic fixes

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobonding: make bonding_store_slaves simpler
Jiri Pirko [Tue, 18 May 2010 05:46:39 +0000]
bonding: make bonding_store_slaves simpler

This patch makes bonding_store_slaves function nicer and easier to understand.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobonding: remove redundant checks from bonding_store_slaves V2
Jiri Pirko [Tue, 18 May 2010 05:44:53 +0000]
bonding: remove redundant checks from bonding_store_slaves V2

(it's actually the same as v1)

Remove checks that duplicates similar checks in bond_enslave.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobonding: move slave MTU handling from sysfs V2
Jiri Pirko [Tue, 18 May 2010 05:42:40 +0000]
bonding: move slave MTU handling from sysfs V2

V1->V2: corrected res/ret use

For some reason, MTU handling (storing, and restoring) is taking  place in
bond_sysfs. The correct place for this code is in bond_enslave, bond_release.
So move it there.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobonding: remove unused variable "found"
Jiri Pirko [Mon, 17 May 2010 03:49:54 +0000]
bonding: remove unused variable "found"

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: QDISC_STATE_RUNNING dont need atomic bit ops
Eric Dumazet [Wed, 2 Jun 2010 10:24:13 +0000]
net: QDISC_STATE_RUNNING dont need atomic bit ops

__QDISC_STATE_RUNNING is always changed while qdisc lock is held.

We can avoid two atomic operations in xmit path, if we move this bit in
a new __state container.

Location of this __state container is carefully chosen so that fast path
only dirties one qdisc cache line.

THROTTLED bit could later be moved into this __state location too, to
avoid dirtying first qdisc cache line.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: Define accessors to manipulate QDISC_STATE_RUNNING
Eric Dumazet [Wed, 2 Jun 2010 10:23:51 +0000]
net: Define accessors to manipulate QDISC_STATE_RUNNING

Define three helpers to manipulate QDISC_STATE_RUNNIG flag, that a
second patch will move on another location.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoqlcnic: NIC Partitioning - Add non privileged mode support
Anirban Chakraborty [Tue, 1 Jun 2010 11:33:09 +0000]
qlcnic: NIC Partitioning - Add non privileged mode support

Added support for NIC functions that work in non privileged mode where these
functions are privileged to do IO only, the control operations are handled via
privileged functions.
Bumped up version number to 5.0.3.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoqlcnic: NIC Partitioning - Add basic infrastructure support
Anirban Chakraborty [Tue, 1 Jun 2010 11:28:51 +0000]
qlcnic: NIC Partitioning - Add basic infrastructure support

Following changes have been added to enable the adapter to work in
NIC partitioning mode where multiple PCI functions of an adapter port can
be configured to work as NIC functions. The first function that is enumerated on
the PCI bus assumes the role of management function which, besides being able
to do all the NIC functionality, can configure other NIC partitions. Other NIC
functions can be configured as privileged or non privileged functions.
Privileged function can not configure other NIC functions but can do all the
NIC functionality including any firmware initialization, chip reset etc. Non
privileged functions can do only basic IO. For chip reset etc, it depends on the
privilege or management function.

1. Added code to determine PCI function number independent of kernel API.
2. Added Driver - FW version 2.0 support.
3. Changed producer and consumer register offset calculation.
4. Added management and privileged operation modes for npar functions. A module
 parameter has been added to control it.
5. Added support for configuring the eswitch in the adapter.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Get port number from CS_PORT_NUM, not PCI function number
Ben Hutchings [Tue, 1 Jun 2010 11:32:43 +0000]
sfc: Get port number from CS_PORT_NUM, not PCI function number

A single shared memory region used to communicate with firmware is
mapped into both PCI PFs of the SFC9020 and SFL9021.  Drivers must be
able to identify which port they are addressing in order to use the
correct sub-region.  Currently we use the PCI function number, but the
PCI address may be virtualised.  Use the CS_PORT_NUM register field
defined for just this purpose.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Only count bad packets in rx_errors
Ben Hutchings [Tue, 1 Jun 2010 11:21:05 +0000]
sfc: Only count bad packets in rx_errors

rx_errors is defined as 'bad packets received', but we are currently
including various overflow errors as well.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Allow shared pages to be recycled
Steve Hodgson [Tue, 1 Jun 2010 11:20:53 +0000]
sfc: Allow shared pages to be recycled

Insert a structure at the start of the shared page that
tracks the dma mapping refcnt. DMA into the next cache
line of the (shared) page (plus EFX_PAGE_IP_ALIGN).

When recycling a page, check the page refcnt. If the
page is otherwise unused, then resurrect the other
receive buffer that previously referenced the page.
Be careful not to overflow the receive ring, since we
can now resurrect n receive buffers in a row.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Recycle discarded rx buffers back onto the queue
Steve Hodgson [Tue, 1 Jun 2010 11:20:34 +0000]
sfc: Recycle discarded rx buffers back onto the queue

The cut-through design of the receive path means that packets that
fail to match the appropriate MAC filter are not discarded at the MAC
but are flagged in the completion event as 'to be discarded'.  On
networks with heavy multicast traffic, this can account for a
significant proportion of received packets, so it is worthwhile to
recycle the buffer immediately in this case rather than freeing it
and then reallocating it shortly after.

The only complication here is dealing with a page shared
between two receive buffers. In that case, we need to be
careful to free the dma mapping when both buffers have
been free'd by the kernel. This means that we can only
recycle such a page if both receive buffers are discarded.
Unfortunately, in an environment with 1500mtu,
rx_alloc_method=PAGE, and a mixture of discarded and
not-discarded frames hitting the same receive queue,
buffer recycling won't always be possible.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Support only two rx buffers per page
Steve Hodgson [Tue, 1 Jun 2010 11:33:17 +0000]
sfc: Support only two rx buffers per page

- Pull the loop handling into efx_init_rx_buffers_(skb|page)
- Remove rx_queue->buf_page, and associated clean up code
- Remove unmap_addr, since unmap_addr is trivially calculable

This will allow us to recycle discarded buffers directly
from efx_rx_packet(), since will never be in the middle of
splitting a page.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Remove efx_rx_queue::add_lock
Steve Hodgson [Tue, 1 Jun 2010 11:19:39 +0000]
sfc: Remove efx_rx_queue::add_lock

Ensure that efx_fast_push_rx_descriptors() must only run
from efx_process_channel() [NAPI], or when napi_disable()
has been executed.

Reimplement the slow fill by sending an event to the
channel, so that NAPI runs, and hanging the subsequent
fast fill off the event handler. Replace the sfc_refill
workqueue and delayed work items with a timer. We do
not need to stop this timer in efx_flush_all() because
it's safe to send the event always; receiving it will
be delayed until NAPI is restarted.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Allow DRV_GEN events to be used outside of selftests
Steve Hodgson [Tue, 1 Jun 2010 11:19:09 +0000]
sfc: Allow DRV_GEN events to be used outside of selftests

Formerly, efx_test_eventq_irq() assumed it was the only user of
driver generated events. Allow it to interoperate with other users.

We can create more than 16 channels, so align event codes with
a multiple of 256 not 16.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Wait for the link to stay up before running loopback selftest
Steve Hodgson [Tue, 1 Jun 2010 11:18:28 +0000]
sfc: Wait for the link to stay up before running loopback selftest

It's been observed that some phys (such as the qt2025c) can
do down-up-down-up transitions, presumably as pcs block lock
settles down.

The loopback selftest will start sending data immediately
after the link comes up. Work around this by waiting for
the link state to stay up for two consecutive polls, rather
than one.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Synchronise link_advertising and wanted_fc on Siena
Steve Hodgson [Tue, 1 Jun 2010 11:18:08 +0000]
sfc: Synchronise link_advertising and wanted_fc on Siena

All of the ethtool code paths keep them in sync, but we need
to ensure they are sync'd at start of day. Matches the sft9001
driver.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Workaround flush failures on Falcon B0
Steve Hodgson [Tue, 1 Jun 2010 11:17:51 +0000]
sfc: Workaround flush failures on Falcon B0

Under certain conditions a PHY may backpressure Falcon B0
in such a way that flushes timeout. In normal circumstances
the phy poller would fix the PHY, and the flush could complete.

But efx_nic_flush_queues() is always called after efx_stop_all(),
so the poller has been stopped. Even if this weren't the case,
how long would we have to wait for the poller to fix this? And
several callers of efx_nic_flush_queues() are about to reset
the device anyway - so we don't need to do anything.

Work around this bug by scheduling a reset. Ensure that the
MAC is never rewired back into the datapath before the reset
runs (we already ignore all rx events anyway).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Reschedule any resets scheduled inside efx_pm_freeze()
Steve Hodgson [Tue, 1 Jun 2010 11:17:24 +0000]
sfc: Reschedule any resets scheduled inside efx_pm_freeze()

efx_pm_freeze() sets efx->state = STATE_FINI, which means
efx_reset_work() will abort any scheduled resets.

efx_pm_thaw() should reschedule efx_reset_work() again,
since a freeze/thaw will not have reset the hardware.

This bug was spotted by inspection - there is no real world example of
this happening.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosfc: Rename struct efx_mcdi_phy_cfg to efx_mcdi_phy_data
Ben Hutchings [Tue, 1 Jun 2010 11:17:06 +0000]
sfc: Rename struct efx_mcdi_phy_cfg to efx_mcdi_phy_data

Most of its members are constant capabilities, not configuration.  The
new name is also consistent with the name of the pointer to it in
struct efx_nic and the names of structures used by other PHY drivers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatl1c: Add AR8151 v2 support and change L0s/L1 routine
Jie Yang [Tue, 1 Jun 2010 07:28:12 +0000]
atl1c: Add AR8151 v2 support and change L0s/L1 routine

Add AR8151 v2.0 Gigabit 1000 support
Change jumbo frame size to 6K
Update L0s/L1 rountine
        when link speed is 100M or 1G, set L1 link timer to 4 for l1d_2 and l2c_b2
        set L1 link timer to 7 for l2c_b, set L1 link timer to 0xF for others.
Update atl1c_suspend routine
just refactory the function, add atl1c_phy_power_saving routine,
when Wake On Lan enable, this func will be called to save power,
it will reautoneg PHY to 10/100M speed depend on the link
partners link capability.
Update atl1c_configure_des_ring
        do not use l2c_b default SRAM configuration.

Signed-off-by: Jie Yang <Jie.Yang@atheros.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoipv6: get rid of ipip6_prl_lock
Eric Dumazet [Tue, 1 Jun 2010 07:26:58 +0000]
ipv6: get rid of ipip6_prl_lock

As noticed by Julia Lawall, ipip6_tunnel_add_prl() incorrectly calls
kzallloc(..., GFP_KERNEL) while a spinlock is held. She provided
a patch to use GFP_ATOMIC instead.

One possibility would be to convert this spinlock to a mutex, or
preallocate the thing before taking the lock.

After RCU conversion, it appears we dont need this lock, since
caller already holds RTNL

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoixp4xx: Support the all multicast flag on the NPE devices.
Richard Cochran [Tue, 1 Jun 2010 07:16:53 +0000]
ixp4xx: Support the all multicast flag on the NPE devices.

This patch adds support for the IFF_ALLMULTI flag. Previously only the
IFF_PROMISC flag was supported.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Acked-By: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet/ipv6/mcast.c: Remove unnecessary kmalloc casts
Joe Perches [Mon, 31 May 2010 17:23:22 +0000]
net/ipv6/mcast.c: Remove unnecessary kmalloc casts

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet/ipv4/igmp.c: Remove unnecessary kmalloc casts
Joe Perches [Mon, 31 May 2010 17:23:21 +0000]
net/ipv4/igmp.c: Remove unnecessary kmalloc casts

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agodrivers/net/tulip/eeprom.c: Remove unnecessary kmalloc casts
Joe Perches [Mon, 31 May 2010 17:23:13 +0000]
drivers/net/tulip/eeprom.c: Remove unnecessary kmalloc casts

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agodrivers/net/gianfar.c: Remove unnecessary kmalloc casts
Joe Perches [Mon, 31 May 2010 17:23:12 +0000]
drivers/net/gianfar.c: Remove unnecessary kmalloc casts

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobe2net: replace udelay() with schedule_timeout() in mbox polling
Sathya Perla [Sun, 30 May 2010 23:34:14 +0000]
be2net: replace udelay() with schedule_timeout() in mbox polling

As mbox polling is done only in process context, it is better to
use schedule_timeout() instead of udelay().

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobe2net: cleanup in case of error in be_open()
Sathya Perla [Sun, 30 May 2010 23:33:45 +0000]
be2net: cleanup in case of error in be_open()

This patch adds cleanup code (things like unregistering irq,
disabling napi etc) to be_open() when an error occurs inside the
routine.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agotulip: implement wake-on-lan support
Steven Walter [Mon, 31 May 2010 12:34:43 +0000]
tulip: implement wake-on-lan support

Based on a patch from http://simon.baatz.info/wol-support-for-an983b/

Tested to resume from suspend by magic packet.

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agotulip: explicity set to D0 power state during init
Steven Walter [Mon, 31 May 2010 17:11:53 +0000]
tulip: explicity set to D0 power state during init

During the first suspend the chip would refuse to enter D3.  Subsequent
suspends worked okay.  During resume the chip is commanded into D0.
Doing so during initialization fixes the initial suspend.

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agor6040: bump version to 0.26 and date to 30 May 2010
Florian Fainelli [Mon, 31 May 2010 09:19:04 +0000]
r6040: bump version to 0.26 and date to 30 May 2010

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agor6040: implement phylib
Florian Fainelli [Mon, 31 May 2010 09:18:57 +0000]
r6040: implement phylib

This patch adds support for using phylib and adds the required mdiobus driver
stubs. This allows for less code to be present in the driver and removes
the PHY status specific timer which is now handled by phylib directly.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agodrivers/net/arcnet/capmode.c: clean up code
Daniel Mack [Mon, 31 May 2010 07:35:13 +0000]
drivers/net/arcnet/capmode.c: clean up code

 - shuffle around functions to get rid of forward declarations
 - fix some CodingStyle and indentation issues
 - last but not least, get rid of the following CONFIG_MODULE=n warning:

drivers/net/arcnet/capmode.c:52: warning: ‘capmode_proto’ defined but not used

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: Fix NETDEV_NOTIFY_PEERS to not conflict with NETDEV_BONDING_DESLAVE.
David S. Miller [Mon, 31 May 2010 07:28:35 +0000]
net: Fix NETDEV_NOTIFY_PEERS to not conflict with NETDEV_BONDING_DESLAVE.

Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agor8169: remove unnecessary cast of readl()'s return value
Junchang Wang [Sun, 30 May 2010 02:26:07 +0000]
r8169: remove unnecessary cast of readl()'s return value

readl() returns a 32-bit integer on all platforms.
There is no need to cast its return value.

Signed-off-by: Junchang Wang <junchangwang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago8139too: remove unnecessary cast of ioread32()'s return value
Junchang Wang [Sun, 30 May 2010 02:22:14 +0000]
8139too: remove unnecessary cast of ioread32()'s return value

ioread32() returns a 32-bit integer on all platforms.
There is no need to cast its return value.

Signed-off-by: Junchang Wang <junchangwang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatm: [he] rewrite buffer handling in receive path
chas williams - CONTRACTOR [Sat, 29 May 2010 09:05:33 +0000]
atm: [he] rewrite buffer handling in receive path

Instead of a fixed list of buffers, use the buffer pool correctly and
keep track of the outstanding buffer indexes using a fixed table.
Resolves reported HBUF_ERR's -- failures due to lack of receive buffers.

Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatm: [he] remove small buffer allocation/handling code
chas williams - CONTRACTOR [Sat, 29 May 2010 09:04:59 +0000]
atm: [he] remove small buffer allocation/handling code

Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatm: [nicstar] remove virt_to_bus() and support 64-bit platforms
chas williams - CONTRACTOR [Sat, 29 May 2010 09:04:25 +0000]
atm: [nicstar] remove virt_to_bus() and support 64-bit platforms

Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatm: [nicstar] reformatted with Lindent
chas williams - CONTRACTOR [Sat, 29 May 2010 09:03:44 +0000]
atm: [nicstar] reformatted with Lindent

Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomlx4_en: use net_device dev_id to indicate port number
Eli Cohen [Wed, 26 May 2010 19:56:24 +0000]
mlx4_en: use net_device dev_id to indicate port number

Today, there are no means to know which port of a hardware device a netdev
interface uses. struct net_device conatins a field, dev_id, that can be used
for that. Use this field to save the port number in ConnectX that is being used
by the net device; port numbers are zero based.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoxen: netfront: explicitly generate arp_notify event after migration.
Ian Campbell [Wed, 26 May 2010 00:09:43 +0000]
xen: netfront: explicitly generate arp_notify event after migration.

Use newly introduced netif_notify_peers() method to ensure a gratuitous ARP is
generated after a migration.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: xen-devel@lists.xensource.com
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoarp_notify: allow drivers to explicitly request a notification event.
Ian Campbell [Wed, 26 May 2010 00:09:42 +0000]
arp_notify: allow drivers to explicitly request a notification event.

Currently such notifications are only generated when the device comes up or the
address changes. However one use case for these notifications is to enable
faster network recovery after a virtual machine migration (by causing switches
to relearn their MAC tables). A migration appears to the network stack as a
temporary loss of carrier and therefore does not trigger either of the current
conditions. Rather than adding carrier up as a trigger (which can cause issues
when interfaces a flapping) simply add an interface which the driver can use
to explicitly trigger the notification.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoarp_notify: document that a gratuitous ARP request is sent when this option is enabled
Ian Campbell [Wed, 26 May 2010 00:09:41 +0000]
arp_notify: document that a gratuitous ARP request is sent when this option is enabled

This option causes a gratuitous ARP request, not a reply as the documentation
currently suggests.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agocaif: cleanup: remove duplicate checks
Dan Carpenter [Mon, 24 May 2010 06:29:34 +0000]
caif: cleanup: remove duplicate checks

"phyinfo" can never be null here because we assigned it an address, so I
removed both the assert and the second check inside the if statement.  I
removed the "phyinfo->phy_layer != NULL" check as well because that was
asserted earlier.

Walter Harms suggested I move the "phyinfo->phy_ref_count++;" outside
the if condition for readability, so I have done that.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agocaif: remove unneeded null check in caif_connect()
Dan Carpenter [Sat, 22 May 2010 10:43:42 +0000]
caif: remove unneeded null check in caif_connect()

We already dereferenced uaddr towards the start of the function when we
checked that "uaddr->sa_family != AF_CAIF".  Both the check here and the
earlier check were added in bece7b2398d0: "caif: Rewritten socket
implementation".  Before that patch, we assumed that we recieved a valid
pointer for uaddr, and based on that, I have removed this check.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agodrivers/isdn: Use memdup_user
Julia Lawall [Fri, 21 May 2010 22:26:42 +0000]
drivers/isdn: Use memdup_user

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agodrivers/net/wan: Use memdup_user
Julia Lawall [Fri, 21 May 2010 22:26:04 +0000]
drivers/net/wan: Use memdup_user

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet/dccp: Use memdup_user
Julia Lawall [Fri, 21 May 2010 22:25:19 +0000]
net/dccp: Use memdup_user

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agodrivers/net/wan: Use memdup_user
Julia Lawall [Fri, 21 May 2010 22:20:26 +0000]
drivers/net/wan: Use memdup_user

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agodrivers/net/cxgb3: Use memdup_user
Julia Lawall [Fri, 21 May 2010 22:20:10 +0000]
drivers/net/cxgb3: Use memdup_user

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agodrivers/net: Use memdup_user
Julia Lawall [Fri, 21 May 2010 22:18:59 +0000]
drivers/net: Use memdup_user

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet/can: Use memdup_user
Julia Lawall [Fri, 21 May 2010 22:18:34 +0000]
net/can: Use memdup_user

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agotcp: tcp_md5_hash_skb_data() frag_list handling
Eric Dumazet [Mon, 17 May 2010 20:40:51 +0000]
tcp: tcp_md5_hash_skb_data() frag_list handling

tcp_md5_hash_skb_data() should handle skb->frag_list, and eventually
recurse.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: remove zap_completion_queue
Eric Dumazet [Wed, 19 May 2010 23:16:03 +0000]
net: remove zap_completion_queue

netpoll does an interesting work in zap_completion_queue(), but this was
before we did skb orphaning before delivering packets to device.

It now makes sense to add a test in dev_kfree_skb_irq() to not queue a
skb if already orphaned, and to remove netpoll zap_completion_queue() as
a bonus.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: Use __this_cpu_inc() in fast path
Eric Dumazet [Wed, 19 May 2010 22:07:23 +0000]
net: Use __this_cpu_inc() in fast path

This patch saves 224 bytes of text on my machine.

__this_cpu_inc() generates a single instruction, using no scratch
registers :

  65 ff 04 25 a8 30 01 00      incl   %gs:0x130a8

instead of :

  48 c7 c2 80 30 01 00         mov    $0x13080,%rdx
  65 48 8b 04 25 88 ea 00 00   mov    %gs:0xea88,%rax
  83 44 10 28 01               addl   $0x1,0x28(%rax,%rdx,1)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agocleanup: remove MIN_FRAG_SIZE definition.
Rami Rosen [Tue, 25 May 2010 10:00:46 +0000]
cleanup: remove MIN_FRAG_SIZE definition.

 - This patch removes MIN_FRAG_SIZE definition in
drivers/net/ppp_generic.c as it is unneeded.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Mon, 31 May 2010 07:10:35 +0000]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

11 years agoLinux 2.6.35-rc1
Linus Torvalds [Sun, 30 May 2010 20:21:02 +0000]
Linux 2.6.35-rc1

.. and thus endeth the merge window.

11 years agoMerge branch 'slub/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Sun, 30 May 2010 19:46:17 +0000]
Merge branch 'slub/urgent' of git://git./linux/kernel/git/penberg/slab-2.6

* 'slub/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLUB: Allow full duplication of kmalloc array for 390
  slub: move kmem_cache_node into it's own cacheline

11 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 30 May 2010 19:35:15 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mutex: Fix optimistic spinning vs. BKL

11 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 30 May 2010 19:35:01 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tui: Fix last use_browser problem related to .perfconfig
  perf symbols: Add the build id cache to the vmlinux path
  perf tui: Reset use_browser if stdout is not a tty
  ring-buffer: Move zeroing out excess in page to ring buffer code
  ring-buffer: Reset "real_end" when page is filled

11 years agoia64: revert __node_random addition
Linus Torvalds [Sun, 30 May 2010 17:08:03 +0000]
ia64: revert __node_random addition

This partially reverts commit 4ec37de89d8c758ee8115e0e64b3f994910789ee
("[IA64] Fix build breakage"), since the commit that made it necessary
got reverted earlier (see commit 35926ff5fba8, 'Revert "cpusets:
randomize node rotor used in cpuset_mem_spread_node()"')

Even if we ever re-introduce this, there is no reason to make
__node_random be some architecture-specific function.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Sun, 30 May 2010 16:16:14 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  mm: export generic_pipe_buf_*() to modules
  fuse: support splice() reading from fuse device
  fuse: allow splice to move pages
  mm: export remove_from_page_cache() to modules
  mm: export lru_cache_add_*() to modules
  fuse: support splice() writing to fuse device
  fuse: get page reference for readpages
  fuse: use get_user_pages_fast()
  fuse: remove unneeded variable

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Sun, 30 May 2010 16:13:43 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/rostedt/linux-2.6-kconfig

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: Hide error output in find command in streamline_config.pl
  kconfig: Fix typo in comment in streamline_config.pl
  kconfig: Make a variable local in streamline_config.pl

11 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Sun, 30 May 2010 16:13:08 +0000]
Merge branch 'for-next' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits)
  mfd: Rename twl5031 sih modules
  mfd: Storage class for timberdale should be before const qualifier
  mfd: Remove unneeded and dangerous clearing of clientdata
  mfd: New AB8500 driver
  gpio: Fix inverted rdc321x gpio data out registers
  mfd: Change rdc321x resources flags to IORESOURCE_IO
  mfd: Move pcf50633 irq related functions to its own file.
  mfd: Use threaded irq for pcf50633
  mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read
  mfd: Fix pcf50633 bitfield logic in interrupt handler
  gpio: rdc321x needs to select MFD_CORE
  mfd: Use menuconfig for quicker config editing
  ARM: AB3550 board configuration and irq for U300
  mfd: AB3550 core driver
  mfd: AB3100 register access change to abx500 API
  mfd: Renamed ab3100.h to abx500.h
  gpio: Add TC35892 GPIO driver
  mfd: Add Toshiba's TC35892 MFD core
  mfd: Delay to mask tsc irq in max8925
  mfd: Remove incorrect wm8350 kfree
  ...

11 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Sun, 30 May 2010 16:12:43 +0000]
Merge branch 'next' of git://git./linux/kernel/git/djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  DMAENGINE: DMA40 U8500 platform configuration
  DMA: PL330: Add dma api driver

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Sun, 30 May 2010 16:12:16 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/qib: Remove DCA support until feature is finished
  IB/qib: Use a single txselect module parameter for serdes tuning
  IB/qib: Don't rely on (undefined) order of function parameter evaluation
  IB/ucm: Use memdup_user()
  IB/qib: Fix undefined symbol error when CONFIG_PCI_MSI=n

11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Sun, 30 May 2010 16:11:11 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Convert quota statistics to generic percpu_counter
  ext3 uses rb_node = NULL; to zero rb_root.
  quota: Fixup dquot_transfer
  reiserfs: Fix resuming of quotas on remount read-write
  pohmelfs: Remove dead quota code
  ufs: Remove dead quota code
  udf: Remove dead quota code
  quota: rename default quotactl methods to dquot_
  quota: explicitly set ->dq_op and ->s_qcop
  quota: drop remount argument to ->quota_on and ->quota_off
  quota: move unmount handling into the filesystem
  quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
  quota: move remount handling into the filesystem
  ocfs2: Fix use after free on remount read-only

Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 30 May 2010 16:06:13 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, cpufeature: Unbreak compile with gcc 3.x
  x86, pat: Fix memory leak in free_memtype
  x86, k8: Fix section mismatch for powernowk8_exit()
  lib/atomic64_test: fix missing include of linux/kernel.h
  x86: remove last traces of quicklist usage
  x86, setup: Phoenix BIOS fixup is needed on Dell Inspiron Mini 1012
  x86: "nosmp" command line option should force the system into UP mode
  arch/x86/pci: use kasprintf
  x86, apic: ack all pending irqs when crashed/on kexec

11 years agoCPU: Avoid using unititialized error variable in disable_nonboot_cpus()
Rafael J. Wysocki [Thu, 27 May 2010 20:16:22 +0000]
CPU: Avoid using unititialized error variable in disable_nonboot_cpus()

If there's only one CPU online when disable_nonboot_cpus() is called,
the error variable will not be initialized and that may lead to
erroneous behavior.  Fix this issue by initializing error in
disable_nonboot_cpus() as appropriate.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agorapidio: fix new kernel-doc warnings
Randy Dunlap [Fri, 28 May 2010 22:08:08 +0000]
rapidio: fix new kernel-doc warnings

Fix a bunch of new rapidio kernel-doc warnings:

Warning(include/linux/rio.h:123): No description found for parameter 'comp_tag'
Warning(include/linux/rio.h:123): No description found for parameter 'phys_efptr'
Warning(include/linux/rio.h:123): No description found for parameter 'em_efptr'
Warning(include/linux/rio.h:123): No description found for parameter 'pwcback'
Warning(include/linux/rio.h:247): No description found for parameter 'set_domain'
Warning(include/linux/rio.h:247): No description found for parameter 'get_domain'
Warning(drivers/rapidio/rio-scan.c:1133): No description found for parameter 'rdev'
Warning(drivers/rapidio/rio-scan.c:1133): Excess function parameter 'port' description in 'rio_init_em'
Warning(drivers/rapidio/rio.c:349): No description found for parameter 'rdev'
Warning(drivers/rapidio/rio.c:349): Excess function parameter 'mport' description in 'rio_request_inb_pwrite'
Warning(drivers/rapidio/rio.c:393): No description found for parameter 'port'
Warning(drivers/rapidio/rio.c:393): No description found for parameter 'local'
Warning(drivers/rapidio/rio.c:393): No description found for parameter 'destid'
Warning(drivers/rapidio/rio.c:393): No description found for parameter 'hopcount'
Warning(drivers/rapidio/rio.c:393): Excess function parameter 'rdev' description in 'rio_mport_get_physefb'
Warning(drivers/rapidio/rio.c:845): Excess function parameter 'local' description in 'rio_std_route_clr_table'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6
Linus Torvalds [Sun, 30 May 2010 16:02:02 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/kyle/parisc-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: Call pagefault_disable/pagefault_enable in kmap_atomic/kunmap_atomic
  parisc: Remove unnecessary macros from entry.S
  parisc: LWS fixes for syscall.S
  parisc: Delete unnecessary nop's in entry.S
  parisc: Avoid interruption in critical region in entry.S
  parisc: invoke oom-killer from page fault
  parisc: clear floating point exception flag on SIGFPE signal
  parisc: Use of align_frame provides stack frame.