12 years agox86: set_highmem_pages_init() cleanup
Pekka Enberg [Tue, 3 Mar 2009 12:10:12 +0000]
x86: set_highmem_pages_init() cleanup

Impact: cleanup

This patch moves set_highmem_pages_init() to arch/x86/mm/highmem_32.c.

The declaration of the function is kept in asm/numa_32.h because
asm/highmem.h is included only if CONFIG_HIGHMEM is enabled so we
can't put the empty static inline function there.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236082212.2675.24.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: unify free_init_pages() and free_initmem()
Pekka Enberg [Tue, 3 Mar 2009 11:15:06 +0000]
x86: unify free_init_pages() and free_initmem()

Impact: unification

This patch introduces a common arch/x86/mm/init.c and moves the identical
free_init_pages() and free_initmem() functions to the file.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236078906.2675.18.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: make sure initmem is writable on 64-bit
Pekka Enberg [Tue, 3 Mar 2009 11:15:04 +0000]
x86: make sure initmem is writable on 64-bit

Impact: unification

This patch ports commit 3c1df68b848b39270752ff8d4b956cc4a4dce0f6 ("x86: make
sure initmem is writable") to the 64-bit version to unify implementations of
free_init_pages().

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <1236078904.2675.17.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: add sanity checks to init_32.c
Pekka Enberg [Tue, 3 Mar 2009 11:15:02 +0000]
x86: add sanity checks to init_32.c

Impact: unification

This patch adds sanity checks that are already in init_64.c to init_32.c.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236078902.2675.16.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: use roundup() instead of PAGE_ALIGN() in find_early_table_space()
Pekka Enberg [Tue, 3 Mar 2009 10:55:05 +0000]
x86: use roundup() instead of PAGE_ALIGN() in find_early_table_space()

Impact: cleanup

This patch changes find_early_table_space() to use roundup() for rounding up
tables to page size to unify the common parts of the 32-bit and 64-bit
implementations.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236077705.2675.6.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: move __VMALLOC_RESERVE to pgtable_32.c
Pekka Enberg [Tue, 3 Mar 2009 10:55:04 +0000]
x86: move __VMALLOC_RESERVE to pgtable_32.c

Impact: cleanup

The __VMALLOC_RESERVE global variable is not used in init_32.c. Move that to
pgtable_32.c to reduce the diff between init_32.c and init_64.c.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236077704.2675.4.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: dont use non-temporal stores in pagecache accesses
Ingo Molnar [Mon, 2 Mar 2009 10:00:57 +0000]
x86, mm: dont use non-temporal stores in pagecache accesses

Impact: standardize IO on cached ops

On modern CPUs it is almost always a bad idea to use non-temporal stores,
as the regression in this commit has shown it:

  30d697f: x86: fix performance regression in write() syscall

The kernel simply has no good information about whether using non-temporal
stores is a good idea or not - and trying to add heuristics only increases
complexity and inserts fragility.

The regression on cached write()s took very long to be found - over two
years. So dont take any chances and let the hardware decide how it makes
use of its caches.

The only exception is drivers/gpu/drm/i915/i915_gem.c: there were we are
absolutely sure that another entity (the GPU) will pick up the dirty
data immediately and that the CPU will not touch that data before the
GPU will.

Also, keep the _nocache() primitives to make it easier for people to
experiment with these details. There may be more clear-cut cases where
non-cached copies can be used, outside of filemap.c.

Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: make vmap yell louder when it is used under irqs_disabled()
Peter Zijlstra [Wed, 25 Feb 2009 15:04:03 +0000]
x86: make vmap yell louder when it is used under irqs_disabled()

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: usercopy: check for total size when deciding non-temporal cutoff
Ingo Molnar [Wed, 25 Feb 2009 07:22:20 +0000]
x86: usercopy: check for total size when deciding non-temporal cutoff

Impact: make more types of copies non-temporal

This change makes the following simple fix:

  30d697f: x86: fix performance regression in write() syscall

A bit more sophisticated: we check the 'total' number of bytes
written to decide whether to copy in a cached or a non-temporal
way.

This will for example cause the tail (modulo 4096 bytes) chunk
of a large write() to be non-temporal too - not just the page-sized
chunks.

Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: pass in 'total' to __copy_from_user_*nocache()
Ingo Molnar [Wed, 25 Feb 2009 07:21:52 +0000]
x86, mm: pass in 'total' to __copy_from_user_*nocache()

Impact: cleanup, enable future change

Add a 'total bytes copied' parameter to __copy_from_user_*nocache(),
and update all the callsites.

The parameter is not used yet - architecture code can use it to
more intelligently decide whether the copy should be cached or
non-temporal.

Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoMerge branch 'x86/asm' into x86/mm
Ingo Molnar [Wed, 25 Feb 2009 07:27:46 +0000]
Merge branch 'x86/asm' into x86/mm

12 years agox86: check range in reserve_early()
Yinghai Lu [Tue, 24 Feb 2009 21:12:43 +0000]
x86: check range in reserve_early()

Impact: cleanup

one 32-bit system reports:

BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.0 present.
last_pfn = 0x1c000 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1c000000 @ 7000-c000
..
RAMDISK: 1bc69000 - 1bfef4fa
..
0MB HIGHMEM available.
448MB LOWMEM available.
  mapped low ram: 0 - 1c000000
  low ram: 00000000 - 1c000000
  bootmap 00002000 - 00005800
(9 early reservations) ==> bootmem [0000000000 - 001c000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 00009ed14c]    TEXT DATA BSS ==> [0000400000 - 00009ed14c]
  #4 [001bc69000 - 001bfef4fa]          RAMDISK ==> [001bc69000 - 001bfef4fa]
  #5 [00009ee000 - 00009f2000]    INIT_PG_TABLE ==> [00009ee000 - 00009f2000]
  #6 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
  #7 [0000007000 - 0000007000]          PGTABLE
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]

Notice the strange blank PGTABLE entry.

The reason is init_pg_table is big enough, and zero range is called
with init_memory_mapping/reserve_early().

So try to check the range in reserve_early()

v2: fix the reversed compare

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: nickpiggin@yahoo.com.au
Cc: ink@jurassic.park.msu.ru
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: efi_stub_32,64 - add missing ENDPROCs
Cyrill Gorcunov [Mon, 23 Feb 2009 19:57:02 +0000]
x86: efi_stub_32,64 - add missing ENDPROCs

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: head_64.S - use GLOBAL macro
Cyrill Gorcunov [Mon, 23 Feb 2009 19:57:01 +0000]
x86: head_64.S - use GLOBAL macro

Impact: cleanup

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: entry_64.S - add missing ENDPROC
Cyrill Gorcunov [Mon, 23 Feb 2009 19:57:00 +0000]
x86: entry_64.S - add missing ENDPROC

native_usergs_sysret64 is described as

extern void native_usergs_sysret64(void)

so lets add ENDPROC here

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: invalid_vm86_irq -- use predefined macros
Cyrill Gorcunov [Mon, 23 Feb 2009 19:56:59 +0000]
x86: invalid_vm86_irq -- use predefined macros

Impact: cleanup

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: head_64.S - use IDT_ENTRIES instead of hardcoded number
Cyrill Gorcunov [Mon, 23 Feb 2009 19:56:58 +0000]
x86: head_64.S - use IDT_ENTRIES instead of hardcoded number

Impact: cleanup

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: head_64.S - remove useless balign
Cyrill Gorcunov [Mon, 23 Feb 2009 19:56:57 +0000]
x86: head_64.S - remove useless balign

Impact: cleanup

NEXT_PAGE already has 'balign' so no
need to keep this redundant one.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: fix performance regression in write() syscall
Salman Qazi [Tue, 24 Feb 2009 02:03:04 +0000]
x86: fix performance regression in write() syscall

While the introduction of __copy_from_user_nocache (see commit:
0812a579c92fefa57506821fa08e90f47cb6dbdd) may have been an improvement
for sufficiently large writes, there is evidence to show that it is
deterimental for small writes.  Unixbench's fstime test gives the
following results for 256 byte writes with MAX_BLOCK of 2000:

    2.6.29-rc6 ( 5 samples, each in KB/sec ):
    283750, 295200, 294500, 293000, 293300

    2.6.29-rc6 + this patch (5 samples, each in KB/sec):
    313050, 3106750, 293350, 306300, 307900

    2.6.18
    395700, 342000, 399100, 366050, 359850

    See w_test() in src/fstime.c in unixbench version 4.1.0.  Basically, the above test
    consists of counting how much we can write in this manner:

    alarm(10);
    while (!sigalarm) {
            for (f_blocks = 0; f_blocks < 2000; ++f_blocks) {
                   write(f, buf, 256);
            }
            lseek(f, 0L, 0);
    }

Note, there are other components to the write syscall regression
that are not addressed here.

Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, simplify kmmio_fault(), cleanup
Ingo Molnar [Sun, 22 Feb 2009 09:24:18 +0000]
x86, mm: fault.c, simplify kmmio_fault(), cleanup

Clarify the kmmio_fault() comment.

Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, update copyrights
Ingo Molnar [Fri, 20 Feb 2009 22:13:36 +0000]
x86, mm: fault.c, update copyrights

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, give another attempt at prefetch handing before SIGBUS
Ingo Molnar [Fri, 20 Feb 2009 22:39:02 +0000]
x86, mm: fault.c, give another attempt at prefetch handing before SIGBUS

Impact: extend prefetch handling on 64-bit

Currently there's an extra is_prefetch() check done in do_sigbus(),
which we only do on 32 bits.

This is a last-ditch check before we terminate a task, so it's worth
giving prefetch instructions another chance - should none of our
existing quirks have caught a prefetch instruction related spurious
fault.

The only risk is if a prefetch causes a real sigbus, in that case
we'll not OOM but try another fault. But this code has been on
32-bit for a long time, so it should be fine in practice.

So do this on 64-bit too - and thus remove one more #ifdef.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, remove #ifdef from fault_in_kernel_space()
Ingo Molnar [Fri, 20 Feb 2009 22:27:29 +0000]
x86, mm: fault.c, remove #ifdef from fault_in_kernel_space()

Impact: cleanup

Removal of an #ifdef in fault_in_kernel_space(), by making
use of the new TASK_SIZE_MAX symbol which is now available
on 32-bit too.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: rename TASK_SIZE64 => TASK_SIZE_MAX
Ingo Molnar [Fri, 20 Feb 2009 22:32:28 +0000]
x86, mm: rename TASK_SIZE64 => TASK_SIZE_MAX

Impact: cleanup

Rename TASK_SIZE64 to TASK_SIZE_MAX, and provide the
define on 32-bit too. (mapped to TASK_SIZE)

This allows 32-bit code to make use of the (former-) TASK_SIZE64
symbol as well, in a clean way.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, remove #ifdef from do_page_fault()
Ingo Molnar [Fri, 20 Feb 2009 22:22:34 +0000]
x86, mm: fault.c, remove #ifdef from do_page_fault()

Impact: cleanup

do_page_fault() has this ugly #ifdef in its prototype:

  #ifdef CONFIG_X86_64
  asmlinkage
  #endif
  void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)

Replace it with 'dotraplinkage' which maps to exactly the above
construct: nothing on 32-bit and asmlinkage on 64-bit.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, unify oops handling
Ingo Molnar [Fri, 20 Feb 2009 22:07:48 +0000]
x86, mm: fault.c, unify oops handling

Impact: add oops-recursion check to 32-bit

Unify the oops state-machine, to the 64-bit version. It is
slightly more careful in that it does a recursion check
in oops_begin(), and is thus more likely to show the relevant
oops.

It also means that 32-bit will print one more line at the
end of pagefault triggered oopses:

  printk(KERN_EMERG "CR2: %016lx\n", address);

Which is generally good information to be seen in partial-dump
digital-camera jpegs ;-)

The downside is the somewhat more complex critical path. Both
variants have been tested well meanwhile by kernel developers
crashing their boxes so i dont think this is a practical worry.

This removes 3 ugly #ifdefs from no_context() and makes the
function a lot nicer read.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, unify oops printing
Ingo Molnar [Fri, 20 Feb 2009 22:00:29 +0000]
x86, mm: fault.c, unify oops printing

Impact: refine/extend page fault related oops printing on 64-bit

 - honor the pause_on_oops logic on 64-bit too
 - print out NX fault warnings on 64-bit as well
 - factor out the NX fault message to make it git-greppable and readable

Note that this means that we do the PF_INSTR check on 32-bit non-PAE
as well where it should not occur ... normally. Cannot hurt.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, reorder functions
Ingo Molnar [Fri, 20 Feb 2009 21:50:24 +0000]
x86, mm: fault.c, reorder functions

Impact: cleanup

Avoid a couple more #ifdefs by moving fundamentally non-unifiable
functions into a single #ifdef 32-bit / #else / #endif block in
fault.c: vmalloc*(), dump_pagetable(), check_vm8086_mode().

No code changed:

   text    data     bss     dec     hex filename
   4618      32      24    4674    1242 fault.o.before
   4618      32      24    4674    1242 fault.o.after

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm, kprobes: fault.c, simplify notify_page_fault()
Ingo Molnar [Fri, 20 Feb 2009 21:42:57 +0000]
x86, mm, kprobes: fault.c, simplify notify_page_fault()

Impact: cleanup

Remove an #ifdef from notify_page_fault(). The function still
compiles to nothing in the !CONFIG_KPROBES case.

Introduce kprobes_built_in() and kprobe_fault_handler() helpers
to allow this - they returns 0 if !CONFIG_KPROBES.

No code changed:

   text    data     bss     dec     hex filename
   4618      32      24    4674    1242 fault.o.before
   4618      32      24    4674    1242 fault.o.after

Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, simplify kmmio_fault()
Ingo Molnar [Fri, 20 Feb 2009 21:32:10 +0000]
x86, mm: fault.c, simplify kmmio_fault()

Impact: cleanup

Remove an #ifdef from kmmio_fault() - we can do this by
providing default implementations for is_kmmio_active()
and kmmio_handler(). The compiler optimizes it all away
in the !CONFIG_MMIOTRACE case.

Also, while at it, clean up mmiotrace.h a bit:

 - standard header guards
 - standard vertical spaces for structure definitions

No code changed (both with mmiotrace on and off in the config):

   text    data     bss     dec     hex filename
   2947      12      12    2971     b9b fault.o.before
   2947      12      12    2971     b9b fault.o.after

Cc: Pekka Paalanen <pq@iki.fi>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, enable PF_RSVD checks on 32-bit too
Ingo Molnar [Fri, 20 Feb 2009 21:18:08 +0000]
x86, mm: fault.c, enable PF_RSVD checks on 32-bit too

Impact: improve page fault handling robustness

The 'PF_RSVD' flag (bit 3) of the page-fault error_code is a
relatively recent addition to x86 CPUs, so the 32-bit do_fault()
implementation never had it. This flag gets set when the CPU
detects nonzero values in any reserved bits of the page directory
entries.

Extend the existing 64-bit check for PF_RSVD in do_page_fault()
to 32-bit too. If we detect such a fault then we print a more
informative oops and the pagetables.

This unifies the code some more, removes an ugly #ifdef and improves
the 32-bit page fault code robustness a bit. It slightly increases
the 32-bit kernel text size.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, factor out the vm86 fault check
Ingo Molnar [Fri, 20 Feb 2009 21:12:18 +0000]
x86, mm: fault.c, factor out the vm86 fault check

Impact: cleanup

Instead of an ugly, open-coded, #ifdef-ed vm86 related legacy check
in do_page_fault(), put it into the check_v8086_mode() helper
function and merge it with an existing #ifdef.

Also, simplify the code flow a tiny bit in the helper.

No code changed:

arch/x86/mm/fault.o:

   text    data     bss     dec     hex filename
   2711      12      12    2735     aaf fault.o.before
   2711      12      12    2735     aaf fault.o.after

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c, refactor/simplify the is_prefetch() code
Ingo Molnar [Fri, 20 Feb 2009 19:37:05 +0000]
x86, mm: fault.c, refactor/simplify the is_prefetch() code

Impact: no functionality changed

Factor out the opcode checker into a helper inline.

The code got a tiny bit smaller:

   text    data     bss     dec     hex filename
   4632      32      24    4688    1250 fault.o.before
   4618      32      24    4674    1242 fault.o.after

And it got cleaner / easier to review as well.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, mm: fault.c cleanup
Ingo Molnar [Fri, 20 Feb 2009 18:56:40 +0000]
x86, mm: fault.c cleanup

Impact: cleanup, no code changed

Clean up various small details, which can be correctness checked
automatically:

 - tidy up the include file section
 - eliminate unnecessary includes
 - introduce show_signal_msg() to clean up code flow
 - standardize the code flow
 - standardize comments and other style details
 - more cleanups, pointed out by checkpatch

No code changed on either 32-bit nor 64-bit:

arch/x86/mm/fault.o:

   text    data     bss     dec     hex filename
   4632      32      24    4688    1250 fault.o.before
   4632      32      24    4688    1250 fault.o.after

the md5 changed due to a change in a single instruction:

   2e8a8241e7f0d69706776a5a26c90bc0  fault.o.before.asm
   c5c3d36e725586eb74f0e10692f0193e  fault.o.after.asm

Because a __LINE__ reference in a WARN_ONCE() has changed.

On 32-bit a few stack offsets changed - no code size difference
nor any functionality difference.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoMerge branch 'tip/x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rosted...
Ingo Molnar [Fri, 20 Feb 2009 17:51:43 +0000]
Merge branch 'tip/x86/urgent' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into x86/mm

12 years agox86, pat: add large-PAT check to split_large_page()
Ingo Molnar [Fri, 20 Feb 2009 16:44:21 +0000]
x86, pat: add large-PAT check to split_large_page()

Impact: future-proof the split_large_page() function

Linus noticed that split_large_page() is not safe wrt. the
PAT bit: it is bit 12 on the 1GB and 2MB page table level
(_PAGE_BIT_PAT_LARGE), and it is bit 7 on the 4K page
table level (_PAGE_BIT_PAT).

Currently it is not a problem because we never set
_PAGE_BIT_PAT_LARGE on any of the large-page mappings - but
should this happen in the future the split_large_page() would
silently lift bit 12 into the lowlevel 4K pte and would start
corrupting the physical page frame offset. Not fun.

So add a debug warning, to make sure if something ever sets
the PAT bit then this function gets updated too.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: check PMD in spurious_fault handler
Steven Rostedt [Thu, 19 Feb 2009 16:46:36 +0000]
x86: check PMD in spurious_fault handler

Impact: fix to prevent hard lockup on bad PMD permissions

If the PMD does not have the correct permissions for a page access,
but the PTE does, the spurious fault handler will mistake the fault
as a lazy TLB transaction. This will result in an infinite loop of:

 fault -> spurious_fault check (pass) -> return to code -> fault

This patch adds a check and a warn on if the PTE passes the permissions
but the PMD does not.

[ Updated: Ingo Molnar suggested using WARN_ONCE with some text ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>

12 years agoMerge branches 'x86/asm', 'x86/cleanups' and 'x86/headers' into x86/core
Ingo Molnar [Fri, 20 Feb 2009 16:40:50 +0000]
Merge branches 'x86/asm', 'x86/cleanups' and 'x86/headers' into x86/core

12 years agoMerge branch 'x86/urgent' into x86/core
Ingo Molnar [Fri, 20 Feb 2009 16:40:43 +0000]
Merge branch 'x86/urgent' into x86/core

12 years agox86: use symbolic constants for MSR_IA32_MISC_ENABLE bits
Vegard Nossum [Fri, 20 Feb 2009 10:56:38 +0000]
x86: use symbolic constants for MSR_IA32_MISC_ENABLE bits

Impact: Cleanup. No functional changes.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: use the right protections for split-up pagetables
Ingo Molnar [Fri, 20 Feb 2009 07:04:13 +0000]
x86: use the right protections for split-up pagetables

Steven Rostedt found a bug in where in his modified kernel
ftrace was unable to modify the kernel text, due to the PMD
itself having been marked read-only as well in
split_large_page().

The fix, suggested by Linus, is to not try to 'clone' the
reference protection of a huge-page, but to use the standard
(and permissive) page protection bits of KERNPG_TABLE.

The 'cloning' makes sense for the ptes but it's a confused and
incorrect concept at the page table level - because the
pagetable entry is a set of all ptes and hence cannot
'clone' any single protection attribute - the ptes can be any
mixture of protections.

With the permissive KERNPG_TABLE, even if the pte protections
get changed after this point (due to ftrace doing code-patching
or other similar activities like kprobes), the resulting combined
protections will still be correct and the pte's restrictive
(or permissive) protections will control it.

Also update the comment.

This bug was there for a long time but has not caused visible
problems before as it needs a rather large read-only area to
trigger. Steve possibly hacked his kernel with some really
large arrays or so. Anyway, the bug is definitely worth fixing.

[ Huang Ying also experienced problems in this area when writing
  the EFI code, but the real bug in split_large_page() was not
  realized back then. ]

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Huang Ying <ying.huang@intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, vmi: TSC going backwards check in vmi clocksource
Alok N Kataria [Wed, 18 Feb 2009 20:33:55 +0000]
x86, vmi: TSC going backwards check in vmi clocksource

Impact: fix time warps under vmware

Similar to the check for TSC going backwards in the TSC clocksource,
we also need this check for VMI clocksource.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org

12 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 19 Feb 2009 17:52:12 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header
  [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC
  [ARM] omap: fix clock reparenting in omap2_clk_set_parent()
  [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0
  [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()
  [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support
  [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller
  [ARM] 5391/1: AT91: Enable GPIO clocks earlier
  [ARM] 5390/1: AT91: Watchdog fixes
  [ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910
  [ARM] omap: fix _omap2_clksel_get_src_field()
  [ARM] omap: fix omap2_divisor_to_clksel() error return value

12 years agoMerge branch 'x86/untangle2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy...
Ingo Molnar [Thu, 19 Feb 2009 17:15:01 +0000]
Merge branch 'x86/untangle2' of git://git./linux/kernel/git/jeremy/xen into x86/headers

12 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 19 Feb 2009 17:14:35 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdown
  x86, mce: use force_sig_info to kill process in machine check
  x86, mce: reinitialize per cpu features on resume
  x86, rcu: fix strange load average and ksoftirqd behavior

12 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 19 Feb 2009 17:14:22 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: limit the number of loops the ring buffer self test can make
  tracing: have function trace select kallsyms
  tracing: disable tracing while testing ring buffer
  tracing/function-graph-tracer: trace the idle tasks

12 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Thu, 19 Feb 2009 16:35:52 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] fix "mem=" handling in case of standby memory
  [S390] Fix timeval regression on s390
  [S390] sclp: handle empty event buffers

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Thu, 19 Feb 2009 16:35:29 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"
  ALSA: jack - Use card->shortname for input name
  ALSA: usb-audio - Workaround for misdetected sample rate with CM6207
  ALSA: usb-audio - Fix non-continuous rate detection
  sound: usb-audio: fix uninitialized variable with M-Audio MIDI interfaces
  Revert "Sound: hda - Restore PCI configuration space with interrupts off"

12 years ago[ARM] 5405/1: ep93xx: remove unused gesbc9312.h header
Hartley Sweeten [Thu, 19 Feb 2009 16:09:04 +0000]
[ARM] 5405/1: ep93xx: remove unused gesbc9312.h header

Remove the gesbc9312.h header since it is unused.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years agox86: compressed head_32 - use ENTRY,ENDPROC macros
Cyrill Gorcunov [Fri, 13 Feb 2009 21:50:23 +0000]
x86: compressed head_32 - use ENTRY,ENDPROC macros

Impact: clenaup

Linker script will put startup_32 at predefined
address so using startup_32 will not bloat the
code size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: compressed head_64 - use ENTRY,ENDPROC macros
Cyrill Gorcunov [Fri, 13 Feb 2009 21:50:22 +0000]
x86: compressed head_64 - use ENTRY,ENDPROC macros

Impact: clenaup

Linker script will put startup_32 at predefined
address so using ENTRY will not bloat the code
size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: pmjump - use GLOBAL,ENDPROC macros
Cyrill Gorcunov [Fri, 13 Feb 2009 21:50:21 +0000]
x86: pmjump - use GLOBAL,ENDPROC macros

Impact: cleanup

We are in setup stage so we use GLOBAL
instead of ENTRY and do not increase code
size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: copy.S - use GLOBAL,ENDPROC macros
Cyrill Gorcunov [Fri, 13 Feb 2009 21:50:20 +0000]
x86: copy.S - use GLOBAL,ENDPROC macros

Impact: cleanup

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: linkage - get rid of _X86 macros
Cyrill Gorcunov [Fri, 13 Feb 2009 21:50:19 +0000]
x86: linkage - get rid of _X86 macros

Impact: cleanup

There was an attempt to bring build-time checking for
missed ENTRY_X86/END_X86 and KPROBE... pairs. Using
them will add messy in code. Get just rid of them.
This commit could be easily restored if the need appear
in future.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: asm linkage - introduce GLOBAL macro
Cyrill Gorcunov [Fri, 13 Feb 2009 21:50:18 +0000]
x86: asm linkage - introduce GLOBAL macro

If the code is time critical and this entry is called
from other places we use ENTRY to have it globally defined
and especially aligned.

Contrary we have some snippets which are size
critical. So we use plane ".globl name; name:"
directive. Introduce GLOBAL macro for this.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years ago[ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC
Makito SHIOKAWA [Thu, 19 Feb 2009 14:34:59 +0000]
[ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC

READ_IMPLIES_EXEC must be set when:
o binary _is_ an executable stack (i.e. not EXSTACK_DISABLE_X)
o processor architecture is _under_ ARMv6 (XN bit is supported from ARMv6)

Signed-off-by: Makito SHIOKAWA <lkhmkt@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[S390] fix "mem=" handling in case of standby memory
Heiko Carstens [Thu, 19 Feb 2009 14:19:01 +0000]
[S390] fix "mem=" handling in case of standby memory

Standby memory detected with the sclp interface gets always registered
with add_memory calls without considering the limitationt that the
"mem=" kernel paramater implies.
So fix this and only register standby memory that is below the specified
limit.
This fixes zfcpdump since it uses "mem=32M". In case there is appr.
2GB standby memory present all of usable memory would be used for the
struct pages needed for standby memory.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] Fix timeval regression on s390
Christian Borntraeger [Thu, 19 Feb 2009 14:19:00 +0000]
[S390] Fix timeval regression on s390

commit aa5e97ce4bbc9d5daeec16b1d15bb3f6b7b4f4d4
[PATCH] improve precision of process accounting.

Introduced a timing regression:
-bash-3.2# time ls
real    0m0.006s
user    0m1.754s
sys     0m1.094s

The problem was introduced by an error in cputime_to_timeval.
Cputime is now 1/4096 microsecond, therefore, we have to divide
the remainder with 4096 to get the microseconds.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] sclp: handle empty event buffers
Peter Oberparleiter [Thu, 19 Feb 2009 14:18:59 +0000]
[S390] sclp: handle empty event buffers

Handle a malformed hardware response which some versions of the
Support Element (SE) may present during SE restart and which otherwise
would result in an endless loop in function sclp_dispatch_evbufs.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[ARM] omap: fix clock reparenting in omap2_clk_set_parent()
Russell King [Thu, 19 Feb 2009 13:25:16 +0000]
[ARM] omap: fix clock reparenting in omap2_clk_set_parent()

When changing the parent of a clock, it is necessary to keep the
clock use counts balanced otherwise things the parent state will
get corrupted.  Since we already disable and re-enable the clock,
we might as well use the recursive versions instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years agoMerge branch 'fix/usb-audio' into for-linus
Takashi Iwai [Thu, 19 Feb 2009 12:58:05 +0000]
Merge branch 'fix/usb-audio' into for-linus

12 years agoMerge branch 'fix/misc' into for-linus
Takashi Iwai [Thu, 19 Feb 2009 12:58:01 +0000]
Merge branch 'fix/misc' into for-linus

12 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Thu, 19 Feb 2009 12:57:52 +0000]
Merge branch 'fix/hda' into for-linus

12 years agox86: syscalls.h: remove asmlinkage from declaration of sys_rt_sigreturn()
Hiroshi Shimamoto [Wed, 18 Feb 2009 19:07:52 +0000]
x86: syscalls.h: remove asmlinkage from declaration of sys_rt_sigreturn()

Impact: cleanup

asmlinkage for sys_rt_sigreturn() no longer exists in arch/x86/kernel/signal.c.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years ago[ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0
Roel Kluin [Thu, 19 Feb 2009 10:57:46 +0000]
[ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0

*ep->reg_udccs is always set to 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()
Nicolas Pitre [Wed, 18 Feb 2009 21:29:22 +0000]
[ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()

In the non highmem case, if two memory banks of 1GB each are provided,
the second bank would evade suppression since its virtual base would
be 0.  Fix this by disallowing any memory bank which virtual base
address is found to be lower than PAGE_OFFSET.

Reported-by: Lennert Buytenhek <buytenh@marvell.com>

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years agoMerge branch 'tip/tracing/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Thu, 19 Feb 2009 09:16:45 +0000]
Merge branch 'tip/tracing/urgent' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent

12 years agosound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"
Clemens Ladisch [Tue, 17 Feb 2009 08:50:30 +0000]
sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"

This reverts commit 7e86c0e6850504ec9516b953f316a47277825e33 ("do not
overwrite EEPROM on Xonar D2/D2X") because it did not actually help with
the problem.

More user reports show that the overwriting of the EEPROM is not
triggered by using this driver but by installing Linux, and that the
installation of any other operating system (even one without any CMI8788
driver) has the same effect.  In other words, the presence of this
driver does not have any effect on the occurrence of the error.  (So
far, the available evidence seems to point to a BIOS bug.)

Furthermore, it turns out that the EEPROM chip is protected against
stray write commands by the command format and by requiring a separate
write-enable command, so the error scenario in the previous commit (that
SPI writes can be misinterpreted as an EEPROM write command) is not even
theoretically possible.

The mixer control that was removed as a consequence of the previous
commit can only be partially emulated in userspace, which also means it
cannot be seen be the in-kernel OSS API emulation, so it is better to
revert that change.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

12 years agox86: include/asm/processor.h remove double declaration of print_cpu_info
Jaswinder Singh Rajput [Thu, 19 Feb 2009 06:50:17 +0000]
x86: include/asm/processor.h remove double declaration of print_cpu_info

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agotracing: limit the number of loops the ring buffer self test can make
Steven Rostedt [Thu, 19 Feb 2009 03:50:01 +0000]
tracing: limit the number of loops the ring buffer self test can make

Impact: prevent deadlock if ring buffer gets corrupted

This patch adds a paranoid check to make sure the ring buffer consumer
does not go into an infinite loop. Since the ring buffer has been set
to read only, the consumer should not loop for more than the ring buffer
size. A check is added to make sure the consumer does not loop more than
the ring buffer size.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>

12 years agotracing: have function trace select kallsyms
Steven Rostedt [Thu, 19 Feb 2009 03:06:18 +0000]
tracing: have function trace select kallsyms

Impact: fix output of function tracer to be useful

The function tracer is pretty useless if KALLSYMS is not configured.
Unless you are good at reading hex values, the function tracer should
select the KALLSYMS configuration.

Also, the dynamic function tracer will fail its self test if KALLSYMS
is not selected.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>

12 years agotracing: disable tracing while testing ring buffer
Steven Rostedt [Wed, 18 Feb 2009 23:33:57 +0000]
tracing: disable tracing while testing ring buffer

Impact: fix to prevent hard lockup on self tests

If one of the tracers are broken and is constantly filling the ring
buffer while the test of the ring buffer is running, it will hang
the box. The reason is that the test is a consumer that will not
stop till the ring buffer is empty. But if the tracer is broken and
is constantly producing input to the buffer, this test will never
end. The result is a lockup of the box.

This happened when KALLSYMS was not defined and the dynamic ftrace
test constantly filled the ring buffer, because the filter failed
and all functions were being traced. Something was being called
that constantly filled the buffer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>

12 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Thu, 19 Feb 2009 02:33:04 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list
  block: fix booting from partitioned md array
  block: revert part of 18ce3751ccd488c78d3827e9f6bf54e6322676fb
  cciss: PCI power management reset for kexec
  paride/pg.c: xs(): &&/|| confusion
  fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free
  block: fix bad definition of BIO_RW_SYNC
  bsg: Fix sense buffer bug in SG_IO

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Thu, 19 Feb 2009 01:55:15 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  omap_hsmmc: Change while(); loops with finite version
  omap_hsmmc: recover from transfer failures
  omap_hsmmc: only MMC1 allows HCTL.SDVS != 1.8V
  omap_hsmmc: card detect irq bugfix
  sdhci: fix led naming
  mmc_test: fix basic read test
  s3cmci: Fix hangup in do_pio_write()
  Revert "sdhci: force high speed capability on some controllers"
  MMC: fix bug - SDHC card capacity not correct

12 years agoinotify: fix GFP_KERNEL related deadlock
Ingo Molnar [Wed, 18 Feb 2009 22:48:43 +0000]
inotify: fix GFP_KERNEL related deadlock

Enhanced lockdep coverage of __GFP_NOFS turned up this new lockdep
assert:

[ 1093.677775]
[ 1093.677781] =================================
[ 1093.680031] [ INFO: inconsistent lock state ]
[ 1093.680031] 2.6.29-rc5-tip-01504-gb49eca1-dirty #1
[ 1093.680031] ---------------------------------
[ 1093.680031] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[ 1093.680031] kswapd0/308 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 1093.680031]  (&inode->inotify_mutex){+.+.?.}, at: [<c0205942>] inotify_inode_is_dead+0x20/0x80
[ 1093.680031] {RECLAIM_FS-ON-W} state was registered at:
[ 1093.680031]   [<c01696b9>] mark_held_locks+0x43/0x5b
[ 1093.680031]   [<c016baa4>] lockdep_trace_alloc+0x6c/0x6e
[ 1093.680031]   [<c01cf8b0>] kmem_cache_alloc+0x20/0x150
[ 1093.680031]   [<c040d0ec>] idr_pre_get+0x27/0x6c
[ 1093.680031]   [<c02056e3>] inotify_handle_get_wd+0x25/0xad
[ 1093.680031]   [<c0205f43>] inotify_add_watch+0x7a/0x129
[ 1093.680031]   [<c020679e>] sys_inotify_add_watch+0x20f/0x250
[ 1093.680031]   [<c010389e>] sysenter_do_call+0x12/0x35
[ 1093.680031]   [<ffffffff>] 0xffffffff
[ 1093.680031] irq event stamp: 60417
[ 1093.680031] hardirqs last  enabled at (60417): [<c018d5f5>] call_rcu+0x53/0x59
[ 1093.680031] hardirqs last disabled at (60416): [<c018d5b9>] call_rcu+0x17/0x59
[ 1093.680031] softirqs last  enabled at (59656): [<c0146229>] __do_softirq+0x157/0x16b
[ 1093.680031] softirqs last disabled at (59651): [<c0106293>] do_softirq+0x74/0x15d
[ 1093.680031]
[ 1093.680031] other info that might help us debug this:
[ 1093.680031] 2 locks held by kswapd0/308:
[ 1093.680031]  #0:  (shrinker_rwsem){++++..}, at: [<c01b0502>] shrink_slab+0x36/0x189
[ 1093.680031]  #1:  (&type->s_umount_key#4){+++++.}, at: [<c01e6d77>] shrink_dcache_memory+0x110/0x1fb
[ 1093.680031]
[ 1093.680031] stack backtrace:
[ 1093.680031] Pid: 308, comm: kswapd0 Not tainted 2.6.29-rc5-tip-01504-gb49eca1-dirty #1
[ 1093.680031] Call Trace:
[ 1093.680031]  [<c016947a>] valid_state+0x12a/0x13d
[ 1093.680031]  [<c016954e>] mark_lock+0xc1/0x1e9
[ 1093.680031]  [<c016a5b4>] ? check_usage_forwards+0x0/0x3f
[ 1093.680031]  [<c016ab74>] __lock_acquire+0x2c6/0xac8
[ 1093.680031]  [<c01688d9>] ? register_lock_class+0x17/0x228
[ 1093.680031]  [<c016b3d3>] lock_acquire+0x5d/0x7a
[ 1093.680031]  [<c0205942>] ? inotify_inode_is_dead+0x20/0x80
[ 1093.680031]  [<c08824c4>] __mutex_lock_common+0x3a/0x4cb
[ 1093.680031]  [<c0205942>] ? inotify_inode_is_dead+0x20/0x80
[ 1093.680031]  [<c08829ed>] mutex_lock_nested+0x2e/0x36
[ 1093.680031]  [<c0205942>] ? inotify_inode_is_dead+0x20/0x80
[ 1093.680031]  [<c0205942>] inotify_inode_is_dead+0x20/0x80
[ 1093.680031]  [<c01e6672>] dentry_iput+0x90/0xc2
[ 1093.680031]  [<c01e67a3>] d_kill+0x21/0x45
[ 1093.680031]  [<c01e6a46>] __shrink_dcache_sb+0x27f/0x355
[ 1093.680031]  [<c01e6dc5>] shrink_dcache_memory+0x15e/0x1fb
[ 1093.680031]  [<c01b05ed>] shrink_slab+0x121/0x189
[ 1093.680031]  [<c01b0d12>] kswapd+0x39f/0x561
[ 1093.680031]  [<c01ae499>] ? isolate_pages_global+0x0/0x233
[ 1093.680031]  [<c0157eae>] ? autoremove_wake_function+0x0/0x43
[ 1093.680031]  [<c01b0973>] ? kswapd+0x0/0x561
[ 1093.680031]  [<c0157daf>] kthread+0x41/0x82
[ 1093.680031]  [<c0157d6e>] ? kthread+0x0/0x82
[ 1093.680031]  [<c01043ab>] kernel_thread_helper+0x7/0x10

inotify_handle_get_wd() does idr_pre_get() which does a
kmem_cache_alloc() without __GFP_FS - and is hence deadlockable under
extreme MM pressure.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: MinChan Kim <minchan.kim@gmail.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agospi-gpio: sanitize MISO bitvalue
Michael Buesch [Wed, 18 Feb 2009 22:48:41 +0000]
spi-gpio: sanitize MISO bitvalue

gpio_get_value() returns 0 or nonzero, but getmiso() expects 0 or 1.
Sanitize the value to a 0/1 boolean.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoBernhard has moved
Bernhard Walle [Wed, 18 Feb 2009 22:48:40 +0000]
Bernhard has moved

Since I don't work for SUSE any more and the bwalle@suse.de address is
invalid, correct it in the copyright headers and documentation.

Signed-off-by: Bernhard Walle <bernhard.walle@gmx.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86: dell-laptop: depends on POWER_SUPPLY
Randy Dunlap [Wed, 18 Feb 2009 22:48:39 +0000]
x86: dell-laptop: depends on POWER_SUPPLY

Build breaks when DELL_LAPTOP=y and POWER_SUPPLY=m.  DELL_LAPTOP needs to
depend on POWER_SUPPLY.

dell-laptop.c:(.text+0x1ef3c4): undefined reference to `power_supply_is_system_supplied'
dell-laptop.c:(.text+0x1ef45e): undefined reference to `power_supply_is_system_supplied'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agovt: Declare PIO_CMAP/GIO_CMAP as compatbile ioctls.
Bill Nottingham [Wed, 18 Feb 2009 22:48:39 +0000]
vt: Declare PIO_CMAP/GIO_CMAP as compatbile ioctls.

Otherwise, these don't work when called from 32-bit userspace on 64-bit
kernels.

Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofbdev/drm: fix Kconfig submenu mess in "Graphics support"
Krzysztof Helt [Wed, 18 Feb 2009 22:48:38 +0000]
fbdev/drm: fix Kconfig submenu mess in "Graphics support"

Submenus of the graphics support "Support for frame buffer devices" and
"Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" are
broken in half after latest changes for Intel 915 mode setting support.

The DRM subsection is broken because one option is put outside the choice
section it depends on.

The frame buffers part is broken then due to circular dependency.  Fix
this by make Intel frame buffers depend on CONFIG_INTEL_AGP.

Kconfigs are broken by d2f59357700487a8b944f4f7777d1e97cf5ea2ed
("drm/i915: select framebuffer support automatically").

This is probably not only way to fix this.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofloppy: request and release only the ports we actually use
Philippe De Muyter [Wed, 18 Feb 2009 22:48:36 +0000]
floppy: request and release only the ports we actually use

The floppy driver requests an I/O port it doesn't need, and sometimes this
causes a conflict with a motherboard device reported by PNPBIOS.

This patch makes the floppy driver request and release only the ports it
actually uses.  It also factors out the request/release stuff and the
io-ports list so they're all in one place now.

The current floppy driver uses only these ports:

    0x3f2 (FD_DOR)
    0x3f4 (FD_STATUS)
    0x3f5 (FD_DATA)
    0x3f7 (FD_DCR/FD_DIR)

but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port
0x3f3.

Some BIOSes report 0x3f3 as a motherboard resource.  The PNP system driver
reserves that, which causes a conflict when the floppy driver requests
0x3f2-0x3f5 later.

Philippe reported that this conflict broke the floppy driver between
2.6.11 and 2.6.22.  His PNPBIOS reports these devices:

    $ cat 00:07/id 00:07/resources # motherboard device
    PNP0c02
    state = active
    io 0x80-0x80
    io 0x10-0x1f
    io 0x22-0x3f
    io 0x44-0x5f
    io 0x90-0x9f
    io 0xa2-0xbf
    io 0x3f0-0x3f1
    io 0x3f3-0x3f3

    $ cat 00:03/id 00:03/resources # floppy device
    PNP0700
    state = active
    io 0x3f4-0x3f5
    io 0x3f2-0x3f2

Reference:
    http://lkml.org/lkml/2009/1/31/162

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Reported-by: Philippe De Muyter <phdm@macqel.be>
Tested-by: Philippe De Muyter <phdm@macqel.be>
Cc: Adam M Belay <abelay@mit.edu>
Cc: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agojsm: additional device support
Adam Lackorzynski [Wed, 18 Feb 2009 22:48:34 +0000]
jsm: additional device support

I have a Digi Neo 8 PCI card (114f:00b1) Serial controller: Digi
International Digi Neo 8 (rev 05)

that works with the jsm driver after using the following patch.

Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Cc: Scott H Kilau <Scott_Kilau@digi.com>
Cc: Wendy Xiong <wendyx@us.ibm.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomm: fix memmap init for handling memory hole
KAMEZAWA Hiroyuki [Wed, 18 Feb 2009 22:48:33 +0000]
mm: fix memmap init for handling memory hole

Now, early_pfn_in_nid(PFN, NID) may returns false if PFN is a hole.
and memmap initialization was not done. This was a trouble for
sparc boot.

To fix this, the PFN should be initialized and marked as PG_reserved.
This patch changes early_pfn_in_nid() return true if PFN is a hole.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomm: clean up for early_pfn_to_nid()
KAMEZAWA Hiroyuki [Wed, 18 Feb 2009 22:48:32 +0000]
mm: clean up for early_pfn_to_nid()

What's happening is that the assertion in mm/page_alloc.c:move_freepages()
is triggering:

BUG_ON(page_zone(start_page) != page_zone(end_page));

Once I knew this is what was happening, I added some annotations:

if (unlikely(page_zone(start_page) != page_zone(end_page))) {
printk(KERN_ERR "move_freepages: Bogus zones: "
       "start_page[%p] end_page[%p] zone[%p]\n",
       start_page, end_page, zone);
printk(KERN_ERR "move_freepages: "
       "start_zone[%p] end_zone[%p]\n",
       page_zone(start_page), page_zone(end_page));
printk(KERN_ERR "move_freepages: "
       "start_pfn[0x%lx] end_pfn[0x%lx]\n",
       page_to_pfn(start_page), page_to_pfn(end_page));
printk(KERN_ERR "move_freepages: "
       "start_nid[%d] end_nid[%d]\n",
       page_to_nid(start_page), page_to_nid(end_page));
 ...

And here's what I got:

move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00]
move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00]
move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff]
move_freepages: start_nid[1] end_nid[0]

My memory layout on this box is:

[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0081ff5d
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[8] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00020000
[    0.000000]     1: 0x00800000 -> 0x0081f7ff
[    0.000000]     1: 0x0081f800 -> 0x0081fe50
[    0.000000]     1: 0x0081fed1 -> 0x0081fed8
[    0.000000]     1: 0x0081feda -> 0x0081fedb
[    0.000000]     1: 0x0081fedd -> 0x0081fee5
[    0.000000]     1: 0x0081fee7 -> 0x0081ff51
[    0.000000]     1: 0x0081ff59 -> 0x0081ff5d

So it's a block move in that 0x81f600-->0x81f7ff region which triggers
the problem.

This patch:

Declaration of early_pfn_to_nid() is scattered over per-arch include
files, and it seems it's complicated to know when the declaration is used.
 I think it makes fix-for-memmap-init not easy.

This patch moves all declaration to include/linux/mm.h

After this,
  if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
     -> Use static definition in include/linux/mm.h
  else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
     -> Use generic definition in mm/page_alloc.c
  else
     -> per-arch back end function will be called.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofs/super.c: add lockdep annotation to s_umount
Peter Zijlstra [Wed, 18 Feb 2009 22:48:30 +0000]
fs/super.c: add lockdep annotation to s_umount

Li Zefan said:

Thread 1:
  for ((; ;))
  {
      mount -t cpuset xxx /mnt > /dev/null 2>&1
      cat /mnt/cpus > /dev/null 2>&1
      umount /mnt > /dev/null 2>&1
  }

Thread 2:
  for ((; ;))
  {
      mount -t cpuset xxx /mnt > /dev/null 2>&1
      umount /mnt > /dev/null 2>&1
  }

(Note: It is irrelevant which cgroup subsys is used.)

After a while a lockdep warning showed up:

=============================================
[ INFO: possible recursive locking detected ]
2.6.28 #479
---------------------------------------------
mount/13554 is trying to acquire lock:
 (&type->s_umount_key#19){--..}, at: [<c049d888>] sget+0x5e/0x321

but task is already holding lock:
 (&type->s_umount_key#19){--..}, at: [<c049da0c>] sget+0x1e2/0x321

other info that might help us debug this:
1 lock held by mount/13554:
 #0:  (&type->s_umount_key#19){--..}, at: [<c049da0c>] sget+0x1e2/0x321

stack backtrace:
Pid: 13554, comm: mount Not tainted 2.6.28-mc #479
Call Trace:
 [<c044ad2e>] validate_chain+0x4c6/0xbbd
 [<c044ba9b>] __lock_acquire+0x676/0x700
 [<c044bb82>] lock_acquire+0x5d/0x7a
 [<c049d888>] ? sget+0x5e/0x321
 [<c061b9b8>] down_write+0x34/0x50
 [<c049d888>] ? sget+0x5e/0x321
 [<c049d888>] sget+0x5e/0x321
 [<c045a2e7>] ? cgroup_set_super+0x0/0x3e
 [<c045959f>] ? cgroup_test_super+0x0/0x2f
 [<c045bcea>] cgroup_get_sb+0x98/0x2e7
 [<c045cfb6>] cpuset_get_sb+0x4a/0x5f
 [<c049dfa4>] vfs_kern_mount+0x40/0x7b
 [<c049e02d>] do_kern_mount+0x37/0xbf
 [<c04af4a0>] do_mount+0x5c3/0x61a
 [<c04addd2>] ? copy_mount_options+0x2c/0x111
 [<c04af560>] sys_mount+0x69/0xa0
 [<c0403251>] sysenter_do_call+0x12/0x31

The cause is after alloc_super() and then retry, an old entry in list
fs_supers is found, so grab_super(old) is called, but both functions hold
s_umount lock:

struct super_block *sget(...)
{
...
retry:
spin_lock(&sb_lock);
if (test) {
list_for_each_entry(old, &type->fs_supers, s_instances) {
if (!test(old, data))
continue;
if (!grab_super(old))  <--- 2nd: down_write(&old->s_umount);
goto retry;
if (s)
destroy_super(s);
return old;
}
}
if (!s) {
spin_unlock(&sb_lock);
s = alloc_super(type);   <--- 1th: down_write(&s->s_umount)
if (!s)
return ERR_PTR(-ENOMEM);
goto retry;
}
...
}

It seems like a false positive, and seems like VFS but not cgroup needs to
be fixed.

Peter said:

We can simply put the new s_umount instance in a but lockdep doesn't
particularly cares about subclass order.

If there's any issue with the callers of sget() assuming the s_umount lock
being of sublcass 0, then there is another annotation we can use to fix
that, but lets not bother with that if this is sufficient.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12673

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Menage <menage@google.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoatmel_serial might lose modem status change
Atsushi Nemoto [Wed, 18 Feb 2009 22:48:28 +0000]
atmel_serial might lose modem status change

I found a problem of handling of modem status of atmel_serial driver.

With the commit 1ecc26 ("atmel_serial: split the interrupt handler"),
handling of modem status signal was splitted into two parts.  The
atmel_tasklet_func() compares new status with irq_status_prev, but
irq_status_prev is not correct if signal status was changed while the port
is closed.

Here is a sequence to cause problem:

1. Remote side sets CTS (and DSR).
2. Local side close the port.
3. Local side clears RTS and DTR.
4. Remote side clears CTS and DSR.
5. Local side reopen the port.  hw_stopped becomes 1.
6. Local side sets RTS and DTR.
7. Remote side sets CTS and DSR.

Then CTS change interrupt can be received, but since CTS bit in
irq_status_prev and new status is same, uart_handle_cts_change() will not
be called (so hw_stopped will not be cleared, i.e.  cannot send any data).

I suppose irq_status_prev should be initialized at somewhere in open
sequence.

Itai Levi pointed out that we need to initialize atmel_port->irq_status
as well here. His analysis is as follows:

> Regarding the second part of the patch (which resets irq_status_prev),
> it turns out that both versions of the patch (mine and Atsushi's)
> still leave enough room for faulty behavior when opening the port.
>
> This is because we are not resetting both irq_status_prev and
> irq_status in atmel_startup() to CSR, which leads faulty behavior in
> the following sequences:
>
> First case:
> 1. closing the port while CTS line = 1 (TX not allowed)
> 2. setting CTS line = 0 (TX allowed)
> 3. opening the port
> 4. transmitting one char
> 5. Cannot transmit more chars, although CTS line is 0
>
> Second case:
> 1. closing the port while CTS line = 0 (TX allowed)
> 2. setting CTS line = 1 (TX not allowed)
> 3. opening the port
> 4. receiving some chars
> 5. Now we can transmit, although CTS line is 1
>
> This reason for this is that the tasklet is scheduled as a result of
> TX or RX interrupts (not a status change!), in steps 4 above. Inside
> the tasklet, the atmel_port->irq_status (which holds the value from
> the previous session) is compared to atmel_port->irq_status_prev.
> Hence, a status-change of the CTS line is faultily detected.
>
> Both cases were verified on 9260 hardware.

[haavard.skinnemoen@atmel.com: folded with patch from Itai Levi]
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Marc Pignat <marc.pignat@hevs.ch>
Cc: Itai Levi <itai.levi.devel@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoatmel-mci: fix initialization of dma slave data
Dan Williams [Wed, 18 Feb 2009 22:48:26 +0000]
atmel-mci: fix initialization of dma slave data

The conversion of atmel-mci to dma_request_channel missed the
initialization of the channel dma_slave information.  The filter_fn passed
to dma_request_channel is responsible for initializing the channel's
private data.  This implementation has the additional benefit of enabling
a generic client-channel data passing mechanism.

Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agolis3lv02d: add axes knowledge of HP Pavilion dv5 models
Giuseppe Bilotta [Wed, 18 Feb 2009 22:48:25 +0000]
lis3lv02d: add axes knowledge of HP Pavilion dv5 models

Add support for HP Pavilion dv5.

Since Intel-based models have an inverted x axis, while AMD-based models
have an inverted y axis, we introduce a new macro that special-cases axis
orientation based on two DMI entries: HP dv5 axis configuration is then
based on both the PRODUCT and BOARD name.

Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Cc: Eric Piel <Eric.Piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@suse.cz>
Tested-by: Palatis Tseng <palatis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agolis3lv02d: support both one- and two-byte sensors
Giuseppe Bilotta [Wed, 18 Feb 2009 22:48:24 +0000]
lis3lv02d: support both one- and two-byte sensors

Sensors responding with 0x3B to WHO_AM_I only have one data register per
direction, thus returning a signed byte from the position which is
occupied by the MSB in sensors responding with 0x3A.

Since multiple sensors share the reply to WHO_AM_I, we rename the defines
to better indicate what they identify (family of single and double
precision sensors).

We support both kind of sensors by checking for the sensor type on init
and defining appropriate data-access routines and sensor limits (for the
joystick) depending on what we find.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Eric Piel <Eric.Piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agohp accelerometer: add freefall detection
Pavel Machek [Wed, 18 Feb 2009 22:48:23 +0000]
hp accelerometer: add freefall detection

This adds freefall handling to hp_accel driver.  According to HP, it
should just work, without us having to set the chip up by hand.

hpfall.c is example .c program that parks the disk when accelerometer
detects free fall.  It should work; for now, it uses fixed 20seconds
protection period.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Thomas Renninger <trenn@suse.de>
Cc: √Čric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoeeepc: should depend on INPUT
Alexey Dobriyan [Wed, 18 Feb 2009 22:48:22 +0000]
eeepc: should depend on INPUT

Otherwise with INPUT=m, EEEPC_LAPTOP=y one gets

drivers/built-in.o: In function `input_sync':
eeepc-laptop.c:(.text+0x18ce51): undefined reference to `input_event'
drivers/built-in.o: In function `input_report_key':
eeepc-laptop.c:(.text+0x18ce73): undefined reference to `input_event'
drivers/built-in.o: In function `eeepc_hotk_check':
eeepc-laptop.c:(.text+0x18d05f): undefined reference to `input_allocate_device'
eeepc-laptop.c:(.text+0x18d10f): undefined reference to `input_register_device'
eeepc-laptop.c:(.text+0x18d131): undefined reference to `input_free_device'
drivers/built-in.o: In function `eeepc_backlight_exit':
eeepc-laptop.c:(.text+0x18d546): undefined reference to `input_unregister_device'

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agopm: fix build for CONFIG_PM unset
Rafael J. Wysocki [Wed, 18 Feb 2009 22:48:21 +0000]
pm: fix build for CONFIG_PM unset

Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken
config dependncies.  Fix that.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: fix possible use after free
Li Zefan [Wed, 18 Feb 2009 22:48:20 +0000]
cgroups: fix possible use after free

In cgroup_kill_sb(), root is freed before sb is detached from the list, so
another sget() may find this sb and call cgroup_test_super(), which will
access the root that has been freed.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomm: task dirty accounting fix
Nick Piggin [Wed, 18 Feb 2009 22:48:18 +0000]
mm: task dirty accounting fix

YAMAMOTO-san noticed that task_dirty_inc doesn't seem to be called properly for
cases where set_page_dirty is not used to dirty a page (eg. mark_buffer_dirty).

Additionally, there is some inconsistency about when task_dirty_inc is
called.  It is used for dirty balancing, however it even gets called for
__set_page_dirty_no_writeback.

So rather than increment it in a set_page_dirty wrapper, move it down to
exactly where the dirty page accounting stats are incremented.

Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotimerfd: add flags check
Davide Libenzi [Wed, 18 Feb 2009 22:48:18 +0000]
timerfd: add flags check

As requested by Michael, add a missing check for valid flags in
timerfd_settime(), and make it return EINVAL in case some extra bits are
set.

Michael said:
If this is to be any use to userland apps that want to check flag
support (perhaps it is too late already), then the sooner we get it
into the kernel the better: 2.6.29 would be good; earlier stables as
well would be even better.

[akpm@linux-foundation.org: remove unused TFD_FLAGS_SET]
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org> [2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoPavel has moved
Pavel Machek [Wed, 18 Feb 2009 22:48:16 +0000]
Pavel has moved

My @suse.cz address will stop working some day, so put working one into
MAINTAINERS/CREDITS.  It would be cool to get this to 2.6.29...  it should
not really break anything.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoseq_file: properly cope with pread
Eric Biederman [Wed, 18 Feb 2009 22:48:16 +0000]
seq_file: properly cope with pread

Currently seq_read assumes that the offset passed to it is always the
offset it passed to user space.  In the case pread this assumption is
broken and we do the wrong thing when presented with pread.

To solve this I introduce an offset cache inside of struct seq_file so we
know where our logical file position is.  Then in seq_read if we try to
read from another offset we reset our data structures and attempt to go to
the offset user space wanted.

[akpm@linux-foundation.org: restore FMODE_PWRITE]
[pjt@google.com: seq_open needs its fmode opened up to take advantage of this]
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Turner <pjt@google.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agovfs: separate FMODE_PREAD/FMODE_PWRITE into separate flags
Paul Turner [Wed, 18 Feb 2009 22:48:15 +0000]
vfs: separate FMODE_PREAD/FMODE_PWRITE into separate flags

Separate FMODE_PREAD and FMODE_PWRITE into separate flags to reflect the
reality that the read and write paths may have independent restrictions.

A git grep verifies that these flags are always cleared together so this
new behavior will only apply to interfaces that change to clear flags
individually.

This is required for "seq_file: properly cope with pread", a post-2.6.25
regression fix.

[akpm@linux-foundation.org: add comment]
Signed-off-by: Paul Turner <pjt@google.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocgroups: update documentation about css_set hash table
Li Zefan [Wed, 18 Feb 2009 22:48:14 +0000]
cgroups: update documentation about css_set hash table

The css_set hash table was introduced in 2.6.26, so update the
documentation accordingly.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoaoe: ignore vendor extension AoE responses
Ed Cashin [Wed, 18 Feb 2009 22:48:13 +0000]
aoe: ignore vendor extension AoE responses

The Welland ME-747K-SI AoE target generates unsolicited AoE responses that
are marked as vendor extensions.  Instead of ignoring these packets, the
aoe driver was generating kernel messages for each unrecognized response
received.  This patch corrects the behavior.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Reported-by: <karaluh@karaluh.pl>
Tested-by: <karaluh@karaluh.pl>
Cc: <stable@kernel.org>
Cc: Alex Buell <alex.buell@munted.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>