12 years agoexport amiga_vblank
Adrian Bunk [Thu, 17 Jul 2008 19:16:21 +0000]
export amiga_vblank

This patch fixes the following build error:

<--  snip  -->

..
  Building modules, stage 2.
  MODPOST 1203 modules
ERROR: "amiga_vblank" [drivers/video/amifb.ko] undefined!
..
make[2]: *** [__modpost] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodrivers/video/c2p.c: add MODULE_LICENSE
Adrian Bunk [Thu, 17 Jul 2008 19:16:20 +0000]
drivers/video/c2p.c: add MODULE_LICENSE

This patch adds the missing MODULE_LICENSE("GPL").

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoatafb: Register Atari-specific video modes with sysfs
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:19 +0000]
atafb: Register Atari-specific video modes with sysfs

Register the Atari-specific video modes with sysfs, so you can see them in
/sys/class/graphics/fb0/modes and change the video mode by writing to
/sys/class/graphics/fb0/mode.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoamifb: Register Amiga-specific video modes with sysfs
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:18 +0000]
amifb: Register Amiga-specific video modes with sysfs

Register the Amiga-specific video modes with sysfs, so you can see them in
/sys/class/graphics/fb0/modes and change the video mode by writing to
/sys/class/graphics/fb0/mode.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agozorro: use memory_read_from_buffer
akinobu.mita@gmail.com [Thu, 17 Jul 2008 19:16:17 +0000]
zorro: use memory_read_from_buffer

zorro: use memory_read_from_buffer

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoZORRO: Replace deprecated __initcall with equivalent device_initcall.
Robert P. J. Day [Thu, 17 Jul 2008 19:16:16 +0000]
ZORRO: Replace deprecated __initcall with equivalent device_initcall.

ZORRO: Replace deprecated __initcall with equivalent device_initcall.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agom68k: remove AP1000 code
Adrian Bunk [Thu, 17 Jul 2008 19:16:15 +0000]
m68k: remove AP1000 code

Unless I miss something that's code for a sparc machine even the sparc
code no longer supports that got copied to m68k when these files were
copied.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agom68k: make multi_defconfig the default defconfig
Adrian Bunk [Thu, 17 Jul 2008 19:16:14 +0000]
m68k: make multi_defconfig the default defconfig

It seems to match the intention behind multi_defconfig to make it the
default defconfig.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoStringify support commas
Mathieu Desnoyers [Thu, 17 Jul 2008 19:16:13 +0000]
Stringify support commas

> This is a no-no for those archs that still use -traditional.
 > > I dunno if this is a problem for you at the moment and the
 > > right fix is anyway to nuke -traditional.
 > >
 > >     Sam

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agom68k: Allow no CPU/platform type for allnoconfig
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:12 +0000]
m68k: Allow no CPU/platform type for allnoconfig

Allow no CPU/platform type for allnoconfig
  - Provide a dummy value for FPSTATESIZE if no CPU type was selected
  - Provide a dummy value for NR_IRQS if no platform type was selected
  - Warn the user if no CPU or platform type was selected

Note: you still cannot build an allnoconfig kernel, as CONFIG_SWAP=n doesn't
build and we cannot easily fix that
(http://groups.google.com/group/linux.kernel/browse_thread/thread/d430c78b07e1827b)

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agom68k: vmlinux-std/sun3.lds.S cleanup - use PAGE_SIZE macro
Cyrill Gorcunov [Thu, 17 Jul 2008 19:16:11 +0000]
m68k: vmlinux-std/sun3.lds.S cleanup - use PAGE_SIZE macro

This patch includes page.h header into linker script that
allow us to use PAGE_SIZE macro instead of numeric constant

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agom68k: Return -ENODEV if no device is found
Geert Uytterhoeven [Thu, 17 Jul 2008 19:16:10 +0000]
m68k: Return -ENODEV if no device is found

According to the tests in do_initcalls(), the proper error code in case no
device is found is -ENODEV, not -ENXIO or -EIO.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoariadne: use netstats in net_device structure
Paulius Zaleckas [Thu, 17 Jul 2008 19:16:09 +0000]
ariadne: use netstats in net_device structure

Use net_device_stats from net_device structure instead of local.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agom68k: remove CVS keywords
Adrian Bunk [Thu, 17 Jul 2008 19:16:08 +0000]
m68k: remove CVS keywords

This patch removes CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6
Linus Torvalds [Mon, 21 Jul 2008 00:17:52 +0000]
Merge branch 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6

* 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6:
  configfs: Allow ->make_item() and ->make_group() to return detailed errors.
  Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."

12 years agoAPCI: revert another duplicated patch
Thomas Gleixner [Fri, 18 Jul 2008 00:07:02 +0000]
APCI: revert another duplicated patch

commit d1857056904d5f313f11184fcfa624652ff9620a ("ACPI: don't walk
tables if ACPI was disabled") is another superfluous duplicate commit
caused by git -> quilt -> git conversion.

Revert it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoAPCI: revert duplicated patch
Thomas Gleixner [Thu, 17 Jul 2008 23:11:38 +0000]
APCI: revert duplicated patch

commit 816c2eda3ce8fa7eb62f22e01e2ec7a3f7d677c0 ("dock: bay: Don't call
acpi_walk_namespace() when ACPI is disabled.") was merged between
2.6.26-rc8 and -rc9)

Due to rebasing the ACPI tree via quilt the same patch got applied again
via commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca ("dock: bay: Don't
call acpi_walk_namespace() when ACPI is disabled.")

Revert it, as it is obviously bogus.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoFix strip driver back up for ldisc/tty changes
Alan Cox [Wed, 16 Jul 2008 20:57:28 +0000]
Fix strip driver back up for ldisc/tty changes

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotty: add more tty_port fields
Alan Cox [Wed, 16 Jul 2008 20:57:18 +0000]
tty: add more tty_port fields

Move more bits into the tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotermios: Termios defines for other platforms
Alan Cox [Wed, 16 Jul 2008 20:57:10 +0000]
termios: Termios defines for other platforms

Fix up the termios of the people who have not yet got with the program

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocyclades: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:57:02 +0000]
cyclades: use tty_port

Switch cyclades to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotty: Clean up tiocmset
Alan Cox [Wed, 16 Jul 2008 20:56:54 +0000]
tty: Clean up tiocmset

Reverse the order of one test and it gets much more readable

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosynclink: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:46 +0000]
synclink: use tty_port

Switch the synclink ports to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agostallion: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:37 +0000]
stallion: use tty_port

Switch the stallion driver to use the tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoatmel_serial: Fix tty_port breakage
Haavard Skinnemoen [Wed, 16 Jul 2008 20:56:29 +0000]
atmel_serial: Fix tty_port breakage

The tty pointer has been moved into a tty_port field, so we need to use
->info->port.tty instead of just ->info->tty. Fixes these build errors:

David Brownell <david-b@pacbell.net> wrote:
> drivers/serial/atmel_serial.c: In function 'atmel_rx_from_ring':
> drivers/serial/atmel_serial.c:665: error: 'struct uart_info' has no member named 'tty'
> drivers/serial/atmel_serial.c: In function 'atmel_rx_from_dma':
> drivers/serial/atmel_serial.c:672: error: 'struct uart_info' has no member named 'tty'
> drivers/serial/atmel_serial.c: In function 'atmel_startup':
> drivers/serial/atmel_serial.c:797: error: 'struct uart_info' has no member named 'tty'
> make[2]: *** [drivers/serial/atmel_serial.o] Error 1

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agorocket: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:18 +0000]
rocket: use tty_port

Switch the rocketport to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomxser: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:10 +0000]
mxser: use tty_port

Switch mxser to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomoxa: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:56:02 +0000]
moxa: use tty_port

Switch MOXA to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoistallion: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:53 +0000]
istallion: use tty_port

Switch istallion to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoisicom: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:45 +0000]
isicom: use tty_port

Switch isicom to use a tty_port structure for some fields

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoriscom8: remove bogus checks
Alan Cox [Wed, 16 Jul 2008 20:55:37 +0000]
riscom8: remove bogus checks

Chris Malley posted a patch removing a NULL check in the riscom8 driver.
Further analysis shows that even more of the tests are irrelevant so we
can delete lots of stuff

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoriscom8: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:29 +0000]
riscom8: use tty_port

Switch riscom8 to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agogs: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:20 +0000]
gs: use tty_port

Switch drivers using the old "generic serial" driver to use the tty_port
structures

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoesp: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:11 +0000]
esp: use tty_port

Switch esp to use the new tty_port structures

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoepca: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:55:02 +0000]
epca: use tty_port

Switch the EPCA driver to include and begin using a tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotty.h: clean up
Alan Cox [Wed, 16 Jul 2008 20:54:54 +0000]
tty.h: clean up

Coding style clean up and white space tidy

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoFix compile errors in SGI console drivers (linux-next tree)
Takashi Iwai [Wed, 16 Jul 2008 20:54:42 +0000]
Fix compile errors in SGI console drivers (linux-next tree)

The below is the patch to replace blindly all possible places,
including Jack's fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
(Reviewed and checked rather than blindly added)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago- Fix compile errors in SGI console drivers (linux-next tree)
Jack Steiner [Wed, 16 Jul 2008 20:54:31 +0000]
- Fix compile errors in SGI console drivers (linux-next tree)

Fix compile errors in SGI console drivers caused by changes to the
tty_port structures in the linux-next tree.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agottydev: fix pamc_zilog for tty pointer move
Stephen Rothwell [Wed, 16 Jul 2008 20:54:22 +0000]
ttydev: fix pamc_zilog for tty pointer move

Today's linux-next build (powerpc allyesconfig) failed like this:

drivers/serial/pmac_zilog.c: In function 'pmz_receive_chars':
drivers/serial/pmac_zilog.c:245: error: 'struct uart_info' has no member named 'tty'
drivers/serial/pmac_zilog.c:250: error: 'struct uart_info' has no member named 'tty'

I applied the patch below (which builds but may, or may not, be correct).
--
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agottydev: fix pamc_zilog for tty pointer move
Stephen Rothwell [Wed, 16 Jul 2008 20:54:11 +0000]
ttydev: fix pamc_zilog for tty pointer move

Today's linux-next build (sparc64 defconfig) failed like this:

drivers/serial/sunhv.c: In function `receive_chars':
drivers/serial/sunhv.c:188: error: structure has no member named `tty'
drivers/serial/sunsu.c: In function `receive_chars':
drivers/serial/sunsu.c:314: error: structure has no member named `tty'
drivers/serial/sunsab.c: In function `receive_chars':
drivers/serial/sunsab.c:121: error: structure has no member named `tty'

I applied the following patch (which, again, may not be correct).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMN10300: Fix MN10300's serial port driver to get at its tty_struct
David Howells [Wed, 16 Jul 2008 20:54:01 +0000]
MN10300: Fix MN10300's serial port driver to get at its tty_struct

Fix MN10300's serial port driver to get at its tty_struct as this moved
from struct uart_info into struct tty_port in patch:

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoserial: use tty_port
Alan Cox [Wed, 16 Jul 2008 20:53:50 +0000]
serial: use tty_port

Switch the serial_core based drivers to use the new tty_port structure.
We can't quite use all of it yet because of the dynamically allocated
extras in the serial_core layer.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotty: Introduce a tty_port common structure
Alan Cox [Wed, 16 Jul 2008 20:53:41 +0000]
tty: Introduce a tty_port common structure

Every tty driver has its own concept of a port structure and because
they all differ we cannot extract commonality.  Begin fixing this by
creating a structure drivers can elect to use so that over time we can
push fields into this and create commonality and then introduce common
methods.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodrivers/serial/: remove CVS keywords
Adrian Bunk [Wed, 16 Jul 2008 20:53:31 +0000]
drivers/serial/: remove CVS keywords

This patch removes CVS keywords that weren't updated for a long time in
comments, printk's and MODULE_DESCRIPTION's (no printk's or
MODULE_DESCRIPTION's are completely removed).

While doing this I also found and fixed a missing \n in a printk
in m32r_sio.c

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodrivers/char/rio/: remove VCS tags
Adrian Bunk [Wed, 16 Jul 2008 20:53:22 +0000]
drivers/char/rio/: remove VCS tags

This patch removes ancient VCS tags (either protected
by #ifdef SCCS_LABELS or commented out).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotty: Ldisc revamp
Alan Cox [Wed, 16 Jul 2008 20:53:12 +0000]
tty: Ldisc revamp

Move the line disciplines towards a conventional ->ops arrangement.  For
the moment the actual 'tty_ldisc' struct in the tty is kept as part of
the tty struct but this can then be changed if it turns out that when it
all settles down we want to refcount ldiscs separately to the tty.

Pull the ldisc code out of /proc and put it with our ldisc code.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotty: isicom, enable/disable pci device
Jiri Slaby [Wed, 16 Jul 2008 20:52:56 +0000]
tty: isicom, enable/disable pci device

Don't forget to enable and disable PCI devices.  The device might be
unusable without that.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoSubject: [PATCH 2/2] atmel_serial: Implement flush_buffer() hook
Haavard Skinnemoen [Wed, 16 Jul 2008 20:52:46 +0000]
Subject: [PATCH 2/2] atmel_serial: Implement flush_buffer() hook

Avoid dumping garbage to the serial port when the tty is flushed. This
tends to happen when rebooting from a serial console.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoSubject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_ops
Haavard Skinnemoen [Wed, 16 Jul 2008 20:52:36 +0000]
Subject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_ops

Serial drivers using DMA (like the atmel_serial driver) tend to get very
confused when the xmit buffer is flushed and nobody told them.  They
also tend to spew a lot of garbage since the DMA engine keeps running
after the buffer is flushed and possibly refilled with unrelated data.

This patch adds a new flush_buffer operation to the uart_ops struct,
along with a call to it from uart_flush_buffer() right after the xmit
buffer has been cleared. The driver can implement this in order to
syncronize its internal DMA state with the xmit buffer when the buffer
is flushed.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosimserial: Fix up for ldisc changes
Alan Cox [Wed, 16 Jul 2008 20:52:25 +0000]
simserial: Fix up for ldisc changes

Noted by Tony Luck although I've done the patches differently and also
removed some other bogus oddments.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoconfigfs: Allow ->make_item() and ->make_group() to return detailed errors.
Joel Becker [Thu, 17 Jul 2008 22:21:29 +0000]
configfs: Allow ->make_item() and ->make_group() to return detailed errors.

The configfs operations ->make_item() and ->make_group() currently
return a new item/group.  A return of NULL signifies an error.  Because
of this, -ENOMEM is the only return code bubbled up the stack.

Multiple folks have requested the ability to return specific error codes
when these operations fail.  This patch adds that ability by changing the
->make_item/group() ops to return ERR_PTR() values.  These errors are
bubbled up appropriately.  NULL returns are changed to -ENOMEM for
compatibility.

Also updated are the in-kernel users of configfs.

This is a rework of reverted commit 11c3b79218390a139f2d474ee1e983a672d5839a.

Signed-off-by: Joel Becker <joel.becker@oracle.com>

12 years agoRevert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."
Joel Becker [Thu, 17 Jul 2008 21:53:48 +0000]
Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."

This reverts commit 11c3b79218390a139f2d474ee1e983a672d5839a.  The code
will move to PTR_ERR().

Signed-off-by: Joel Becker <joel.becker@oracle.com>

12 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Thu, 17 Jul 2008 17:55:51 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  [PATCH] ocfs2: fix oops in mmap_truncate testing
  configfs: call drop_link() to cleanup after create_link() failure
  configfs: Allow ->make_item() and ->make_group() to return detailed errors.
  configfs: Fix failing mkdir() making racing rmdir() fail
  configfs: Fix deadlock with racing rmdir() and rename()
  configfs: Make configfs_new_dirent() return error code instead of NULL
  configfs: Protect configfs_dirent s_links list mutations
  configfs: Introduce configfs_dirent_lock
  ocfs2: Don't snprintf() without a format.
  ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
  ocfs2/net: Silence build warnings on sparc64
  ocfs2: Handle error during journal load
  ocfs2: Silence an error message in ocfs2_file_aio_read()
  ocfs2: use simple_read_from_buffer()
  ocfs2: fix printk format warnings with OCFS2_FS_STATS=n
  [PATCH 2/2] ocfs2: Instrument fs cluster locks
  [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6
Linus Torvalds [Thu, 17 Jul 2008 17:55:07 +0000]
Merge git://git./linux/kernel/git/brodo/pcmcia-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6:
  pcmcia: ide-cs: Remove outdated comment
  pcmcia: fix cisinfo_t removal
  pcmcia: fix return value in cm4000_cs.c

12 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 17 Jul 2008 17:38:59 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix asm/e820.h for userspace inclusion
  x86: fix numaq_tsc_disable
  x86: fix kernel_physical_mapping_init() for large x86 systems

12 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 17 Jul 2008 17:37:10 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: do not trace library functions
  ftrace: do not trace scheduler functions
  ftrace: fix lockup with MAXSMP
  ftrace: fix merge buglet

12 years agox86: fix asm/e820.h for userspace inclusion
Rusty Russell [Tue, 15 Jul 2008 05:02:27 +0000]
x86: fix asm/e820.h for userspace inclusion

asm-x86/e820.h is included from userspace.  'x86: make e820.c to have
common functions' (b79cd8f1268bab57ff85b19d131f7f23deab2dee) broke it:

make -C Documentation/lguest
cc -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include
lguest.c  -lz -o lguest
In file included from ../../include/asm-x86/bootparam.h:8,
                 from lguest.c:45:
../../include/asm/e820.h:66: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:67: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:68: error: expected ‘)’ before ‘start’
../../include/asm/e820.h:72: error: expected ‘=’, ‘,’, ‘;’, ‘asm’
or ‘__attribute__’ before ‘e820_update_range’
...

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: fix numaq_tsc_disable
Yinghai Lu [Tue, 15 Jul 2008 06:29:01 +0000]
x86: fix numaq_tsc_disable

fix:

 arch/x86/kernel/numaq_32.c: In function ‘numaq_tsc_disable’:
 arch/x86/kernel/numaq_32.c:99: warning: ‘return’ with a value, in function returning void

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoMerge branch 'linus' into x86/urgent
Ingo Molnar [Thu, 17 Jul 2008 17:24:56 +0000]
Merge branch 'linus' into x86/urgent

12 years agofix build error of arch/ia64/kvm/*
Takashi Iwai [Thu, 17 Jul 2008 16:09:12 +0000]
fix build error of arch/ia64/kvm/*

Fix calls of smp_call_function*() in arch/ia64/kvm for recent API
changes.

CC [M] arch/ia64/kvm/kvm-ia64.o
  arch/ia64/kvm/kvm-ia64.c: In function 'handle_global_purge':
  arch/ia64/kvm/kvm-ia64.c:398: error: too many arguments to function 'smp_call_function_single'
  arch/ia64/kvm/kvm-ia64.c: In function 'kvm_vcpu_kick':
  arch/ia64/kvm/kvm-ia64.c:1696: error: too many arguments to function 'smp_call_function_single'

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob...
Linus Torvalds [Thu, 17 Jul 2008 16:15:23 +0000]
Merge branch 'ptrace-cleanup' of git://git./linux/kernel/git/frob/linux-2.6-utrace

* 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace:
  fix dangling zombie when new parent ignores children
  do_wait: return security_task_wait() error code in place of -ECHILD
  ptrace children revamp
  do_wait reorganization

12 years agoUpdate scripts/Makefile.fwinst to cope with older make
David Woodhouse [Thu, 17 Jul 2008 06:44:32 +0000]
Update scripts/Makefile.fwinst to cope with older make

Also fix unwanted rebuilds of the firmware/ihex2fw tool by including
the .ihex2fw.cmd file when present.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reported-and-tested-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Thu, 17 Jul 2008 16:05:38 +0000]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPP
  [S390] qdio: new qdio driver.
  [S390] cio: Export chsc_error_from_response().
  [S390] vmur: Fix return code handling.
  [S390] Fix stacktrace compile bug.
  [S390] Increase default warning stacksize.
  [S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().
  [S390] chsc headers userspace cleanup
  [S390] dasd: fix unsolicited SIM handling.
  [S390] zfcpdump: Make SCSI disk dump tool recognize storage holes

12 years agoFix collateral damage to top level Makefile
Grant Likely [Thu, 17 Jul 2008 07:06:55 +0000]
Fix collateral damage to top level Makefile

The patch named "powerpc/mpc5121: Add clock driver", also contained
an unrelated and bogus change to the top-level makefile.  This patch
backs out the bad bit.

SHA1 of offending patch: 137e95906e294913fab02162e8a1948ade49acb5)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Repented-by: John Rigby <jrigby@freescale.com>
[ Heh. Normally I pick these out from the diffstats, but I guess
  I've grown to trust the ppc tree too much ;)   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoftrace: do not trace library functions
Ingo Molnar [Thu, 17 Jul 2008 15:40:48 +0000]
ftrace: do not trace library functions

make function tracing more robust: do not trace library functions.

We've already got a sizable list of exceptions:

 ifdef CONFIG_FTRACE
 # Do not profile string.o, since it may be used in early boot or vdso
 CFLAGS_REMOVE_string.o = -pg
 # Also do not profile any debug utilities
 CFLAGS_REMOVE_spinlock_debug.o = -pg
 CFLAGS_REMOVE_list_debug.o = -pg
 CFLAGS_REMOVE_debugobjects.o = -pg
 CFLAGS_REMOVE_find_next_bit.o = -pg
 CFLAGS_REMOVE_cpumask.o = -pg
 CFLAGS_REMOVE_bitmap.o = -pg
 endif

... and the pattern has been that random library functionality showed
up in ftrace's critical path (outside of its recursion check), causing
hard to debug lockups.

So be a bit defensive about it and exclude all lib/*.o functions by
default. It's not that they are overly interesting for tracing purposes
anyway. Specific ones can still be traced, in an opt-in manner.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoftrace: do not trace scheduler functions
Ingo Molnar [Tue, 15 Apr 2008 20:39:31 +0000]
ftrace: do not trace scheduler functions

do not trace scheduler functions - it's still a bit fragile
and can lock up with:

  http://redhat.com/~mingo/misc/config-Thu_Jul_17_13_34_52_CEST_2008

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoftrace: fix lockup with MAXSMP
Ingo Molnar [Thu, 17 Jul 2008 15:38:17 +0000]
ftrace: fix lockup with MAXSMP

MAXSMP brings in lots of use of various bitops in smp_processor_id()
and friends - causing ftrace to lock up during bootup:

  calling  anon_inode_init+0x0/0x130
  initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs
  calling  acpi_event_init+0x0/0x57
  [ hard hang ]

So exclude the bitops facilities from tracing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years ago[S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPP
Stefan Haberland [Thu, 17 Jul 2008 15:16:49 +0000]
[S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPP

return value -ENOTSUPP is not valid in userspace context, use
-EOPNOTSUPP instead

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

12 years ago[S390] qdio: new qdio driver.
Jan Glauber [Thu, 17 Jul 2008 15:16:48 +0000]
[S390] qdio: new qdio driver.

List of major changes:
- split qdio driver into several files
- seperation of thin interrupt code
- improved handling for multiple thin interrupt devices
- inbound and outbound processing now always runs in tasklet context
- significant less tasklet schedules per interrupt needed
- merged qebsm with non-qebsm handling
- cleanup qdio interface and added kerneldoc
- coding style

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Utz Bacher <utz.bacher@de.ibm.com>
Reviewed-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

12 years ago[S390] cio: Export chsc_error_from_response().
Cornelia Huck [Thu, 17 Jul 2008 15:16:47 +0000]
[S390] cio: Export chsc_error_from_response().

Make chsc_error_from_response() available to chsc callers outside
of chsc.c (namely qdio) to avoid duplicating error checking code.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

12 years ago[S390] vmur: Fix return code handling.
Frank Munzert [Thu, 17 Jul 2008 15:16:46 +0000]
[S390] vmur: Fix return code handling.

Use -EOPNOTSUPP instead of -ENOTSUPP.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] Fix stacktrace compile bug.
Heiko Carstens [Thu, 17 Jul 2008 15:16:45 +0000]
[S390] Fix stacktrace compile bug.

Add missing module.h include to fix this:

CC arch/s390/kernel/stacktrace.o
arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration
arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] Increase default warning stacksize.
Heiko Carstens [Thu, 17 Jul 2008 15:16:44 +0000]
[S390] Increase default warning stacksize.

Compiling a kernel with allmodconfig or allyesconfig results in tons
of gcc warnings, because the default maximum stacksize from which on
gcc will emit a warning is just 256 bytes.
Increase this to 2048, so these warnings don't distract from the real
warnings that we need to watch at.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().
Cornelia Huck [Thu, 17 Jul 2008 15:16:43 +0000]
[S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] chsc headers userspace cleanup
Adrian Bunk [Thu, 17 Jul 2008 15:16:42 +0000]
[S390] chsc headers userspace cleanup

Kernel headers shouldn't expose functions to userspace.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] dasd: fix unsolicited SIM handling.
Stefan Haberland [Thu, 17 Jul 2008 15:16:41 +0000]
[S390] dasd: fix unsolicited SIM handling.

Add missing schedule_bh and check that there is 32 bit sense data.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] zfcpdump: Make SCSI disk dump tool recognize storage holes
Frank Munzert [Thu, 17 Jul 2008 15:16:40 +0000]
[S390] zfcpdump: Make SCSI disk dump tool recognize storage holes

The kernel part of zfcpdump establishes a new debugfs file zcore/memmap
which exports information on memory layout (start address and length of each
memory chunk) to its userspace counterpart.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years agoftrace: fix merge buglet
Ingo Molnar [Thu, 17 Jul 2008 11:26:50 +0000]
ftrace: fix merge buglet

-tip testing found a bootup hang here:

  initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs
  calling  acpi_event_init+0x0/0x57

the bootup should have continued with:

  initcall acpi_event_init+0x0/0x57 returned 0 after 45 msecs

but it hung hard there instead.

bisection led to this commit:

| commit 5806b81ac1c0c52665b91723fd4146a4f86e386b
| Merge: d14c8a6... 6712e29...
| Author: Ingo Molnar <mingo@elte.hu>
| Date:   Mon Jul 14 16:11:52 2008 +0200
|     Merge branch 'auto-ftrace-next' into tracing/for-linus

turns out that i made this mistake in the merge:

  ifdef CONFIG_FTRACE
  # Do not profile debug utilities
  CFLAGS_REMOVE_tsc_64.o = -pg
  CFLAGS_REMOVE_tsc_32.o = -pg

those two files got unified meanwhile - so the dont-profile annotation
got lost. The proper rule is:

  CFLAGS_REMOVE_tsc.o = -pg

i guess this could have been caught sooner if the CFLAGS_REMOVE* kbuild
rule aborted the build if it met a target that does not exist anymore?

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agofix dangling zombie when new parent ignores children
Roland McGrath [Wed, 9 Apr 2008 06:12:30 +0000]
fix dangling zombie when new parent ignores children

This fixes an arcane bug that we think was a regression introduced
by commit b2b2cbc4b2a2f389442549399a993a8306420baf.  When a parent
ignores SIGCHLD (or uses SA_NOCLDWAIT), its children would self-reap
but they don't if it's using ptrace on them.  When the parent thread
later exits and ceases to ptrace a child but leaves other live
threads in the parent's thread group, any zombie children are left
dangling.  The fix makes them self-reap then, as they would have
done earlier if ptrace had not been in use.

Signed-off-by: Roland McGrath <roland@redhat.com>

12 years agodo_wait: return security_task_wait() error code in place of -ECHILD
Roland McGrath [Mon, 31 Mar 2008 01:41:25 +0000]
do_wait: return security_task_wait() error code in place of -ECHILD

This reverts the effect of commit f2cc3eb133baa2e9dc8efd40f417106b2ee520f3
"do_wait: fix security checks".  That change reverted the effect of commit
73243284463a761e04d69d22c7516b2be7de096c.  The rationale for the original
commit still stands.  The inconsistent treatment of children hidden by
ptrace was an unintended omission in the original change and in no way
invalidates its purpose.

This makes do_wait return the error returned by security_task_wait()
(usually -EACCES) in place of -ECHILD when there are some children the
caller would be able to wait for if not for the permission failure.  A
permission error will give the user a clue to look for security policy
problems, rather than for mysterious wait bugs.

Signed-off-by: Roland McGrath <roland@redhat.com>

12 years agoptrace children revamp
Roland McGrath [Tue, 25 Mar 2008 01:36:23 +0000]
ptrace children revamp

ptrace no longer fiddles with the children/sibling links, and the
old ptrace_children list is gone.  Now ptrace, whether of one's own
children or another's via PTRACE_ATTACH, just uses the new ptraced
list instead.

There should be no user-visible difference that matters.  The only
change is the order in which do_wait() sees multiple stopped
children and stopped ptrace attachees.  Since wait_task_stopped()
was changed earlier so it no longer reorders the children list, we
already know this won't cause any new problems.

Signed-off-by: Roland McGrath <roland@redhat.com>

12 years agodo_wait reorganization
Roland McGrath [Thu, 20 Mar 2008 02:24:59 +0000]
do_wait reorganization

This breaks out the guts of do_wait into three subfunctions.
The control flow is less nonobvious without so much goto.
do_wait_thread and ptrace_do_wait contain the main work of the outer loop.
wait_consider_task contains the main work of the inner loop.

Signed-off-by: Roland McGrath <roland@redhat.com>

12 years agoscsi_dh: Verify "dev" is a sdev before accessing it.
Chandra Seetharaman [Thu, 17 Jul 2008 00:35:08 +0000]
scsi_dh: Verify "dev" is a sdev before accessing it.

Before accessing the device data structure in hardware handlers,
make sure it is a indeed a sdev device.

Yinghai Lu <yhlu.kernel@gmail.com> found the bug on Jul 16, 2008,
and later tested/verified the following fix.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Thu, 17 Jul 2008 00:25:46 +0000]
Merge branch 'linux-next' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits)
  Revert "x86/PCI: ACPI based PCI gap calculation"
  PCI: remove unnecessary volatile in PCIe hotplug struct controller
  x86/PCI: ACPI based PCI gap calculation
  PCI: include linux/pm_wakeup.h for device_set_wakeup_capable
  PCI PM: Fix pci_prepare_to_sleep
  x86/PCI: Fix PCI config space for domains > 0
  Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n
  PCI: Simplify PCI device PM code
  PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep
  PCI ACPI: Rework PCI handling of wake-up
  ACPI: Introduce new device wakeup flag 'prepared'
  ACPI: Introduce acpi_device_sleep_wake function
  PCI: rework pci_set_power_state function to call platform first
  PCI: Introduce platform_pci_power_manageable function
  ACPI: Introduce acpi_bus_power_manageable function
  PCI: make pci_name use dev_name
  PCI: handle pci_name() being const
  PCI: add stub for pci_set_consistent_dma_mask()
  PCI: remove unused arch pcibios_update_resource() functions
  PCI: fix pci_setup_device()'s sprinting into a const buffer
  ...

Fixed up conflicts in various files (arch/x86/kernel/setup_64.c,
arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c,
drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86
and ACPI updates manually.

12 years agoRevert "x86/PCI: ACPI based PCI gap calculation"
Jesse Barnes [Wed, 16 Jul 2008 23:21:47 +0000]
Revert "x86/PCI: ACPI based PCI gap calculation"

This reverts commit 809d9a8f93bd8504dcc34b16bbfdfd1a8c9bb1ed.

This one isn't quite ready for prime time.  It needs more testing and
additional feedback from the ACPI guys.

12 years ago[PATCH] ocfs2: fix oops in mmap_truncate testing
Coly Li [Mon, 30 Jun 2008 10:45:45 +0000]
[PATCH] ocfs2: fix oops in mmap_truncate testing

This patch fixes a mmap_truncate bug which was found by ocfs2 test suite.

In an ocfs2 cluster more than 1 node, run program mmap_truncate, which races
mmap writes and truncates from multiple processes. While the test is
running, a stat from another node forces writeout, causing an oops in
ocfs2_get_block() because it sees a buffer to write which isn't allocated.

This patch fixed the bug by clear dirty and uptodate bits in buffer, leave
the buffer unmapped and return.

Fix is suggested by Mark Fasheh, and I code up the patch.

Signed-off-by: Coly Li <coyli@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Wed, 16 Jul 2008 22:11:07 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits)
  sdio_uart: Fix SDIO break control to now return success or an error
  mmc: host driver for Ricoh Bay1Controllers
  sdio: sdio_io.c Fix sparse warnings
  sdio: fix the use of hard coded timeout value.
  mmc: OLPC: update vdd/powerup quirk comment
  mmc: fix spares errors of sdhci.c
  mmc: remove multiwrite capability
  wbsd: fix bad dma_addr_t conversion
  atmel-mci: Driver for Atmel on-chip MMC controllers
  mmc: fix sdio_io sparse errors
  mmc: wbsd.c fix shadowing of 'dma' variable
  MMC: S3C24XX: Refuse incorrectly aligned transfers
  MMC: S3C24XX: Add maintainer entry
  MMC: S3C24XX: Update error debugging.
  MMC: S3C24XX: Add media presence test to request handling.
  MMC: S3C24XX: Fix use of msecs where jiffies are needed
  MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices
  MMC: S3C24XX: Fix s3c2410_dma_request() return code check.
  MMC: S3C24XX: Allow card-detect on non-IRQ capable pin
  MMC: S3C24XX: Ensure host->mrq->data is valid
  ...

Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c
and include/linux/mmc/sdio_func.h when merging.

12 years agoMerge branch 'for_linus' of git://git.infradead.org/~dedekind/ubifs-2.6
Linus Torvalds [Wed, 16 Jul 2008 22:02:57 +0000]
Merge branch 'for_linus' of git://git.infradead.org/~dedekind/ubifs-2.6

* 'for_linus' of git://git.infradead.org/~dedekind/ubifs-2.6:
  UBIFS: include to compilation
  UBIFS: add new flash file system
  UBIFS: add brief documentation
  MAINTAINERS: add UBIFS section
  do_mounts: allow UBI root device name
  VFS: export sync_sb_inodes
  VFS: move inode_lock into sync_sb_inodes

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Wed, 16 Jul 2008 21:53:54 +0000]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (76 commits)
  IDE: Report errors during drive reset back to user space
  Update documentation of HDIO_DRIVE_RESET ioctl
  IDE: Remove unused code
  IDE: Fix HDIO_DRIVE_RESET handling
  hd.c: remove the #include <linux/mc146818rtc.h>
  update the BLK_DEV_HD help text
  move ide/legacy/hd.c to drivers/block/
  ide/legacy/hd.c: use late_initcall()
  remove BLK_DEV_HD_ONLY
  ide: endian annotations in ide-floppy.c
  ide-floppy: zero out the whole struct ide_atapi_pc on init
  ide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open
  ide-cd: move request prep chunk from cdrom_do_newpc_cont to rq issue path
  ide-cd: move request prep from cdrom_start_rw_cont to rq issue path
  ide-cd: move request prep from cdrom_start_seek_continuation to rq issue path
  ide-cd: fold cdrom_start_seek into ide_cd_do_request
  ide-cd: simplify request issuing path
  ide-cd: mv ide_do_rw_cdrom ide_cd_do_request
  ide-cd: cdrom_start_seek: remove unused argument block
  ide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block
  ...

12 years agoMerge branch 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak...
Linus Torvalds [Wed, 16 Jul 2008 21:52:12 +0000]
Merge branch 'release-2.6.27' of git://git./linux/kernel/git/ak/linux-acpi-merge-2.6

* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-merge-2.6: (87 commits)
  Fix FADT parsing
  Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.
  ACPI: use dev_printk when possible
  PNPACPI: add support for HP vendor-specific CCSR descriptors
  PNP: avoid legacy IDE IRQs
  PNP: convert resource options to single linked list
  ISAPNP: handle independent options following dependent ones
  PNP: remove extra 0x100 bit from option priority
  PNP: support optional IRQ resources
  PNP: rename pnp_register_*_resource() local variables
  PNPACPI: ignore _PRS interrupt numbers larger than PNP_IRQ_NR
  PNP: centralize resource option allocations
  PNP: remove redundant pnp_can_configure() check
  PNP: make resource assignment functions return 0 (success) or -EBUSY (failure)
  PNP: in debug resource dump, make empty list obvious
  PNP: improve resource assignment debug
  PNP: increase I/O port & memory option address sizes
  PNP: introduce pnp_irq_mask_t typedef
  PNP: make resource option structures private to PNP subsystem
  PNP: define PNP-specific IORESOURCE_IO_* flags alongside IRQ, DMA, MEM
  ...

12 years agoblock: Trivial fix for blk_integrity_rq()
Martin K. Petersen [Wed, 16 Jul 2008 20:09:06 +0000]
block: Trivial fix for blk_integrity_rq()

Fail integrity check gracefully when request does not have a bio
attached (BLOCK_PC).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Wed, 16 Jul 2008 21:49:49 +0000]
Merge git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (82 commits)
  NFSv4: Remove BKL from the nfsv4 state recovery
  SUNRPC: Remove the BKL from the callback functions
  NFS: Remove BKL from the readdir code
  NFS: Remove BKL from the symlink code
  NFS: Remove BKL from the sillydelete operations
  NFS: Remove the BKL from the rename, rmdir and unlink operations
  NFS: Remove BKL from NFS lookup code
  NFS: Remove the BKL from nfs_link()
  NFS: Remove the BKL from the inode creation operations
  NFS: Remove BKL usage from open()
  NFS: Remove BKL usage from the write path
  NFS: Remove the BKL from the permission checking code
  NFS: Remove attribute update related BKL references
  NFS: Remove BKL requirement from attribute updates
  NFS: Protect inode->i_nlink updates using inode->i_lock
  nfs: set correct fl_len in nlmclnt_test()
  SUNRPC: Support registering IPv6 interfaces with local rpcbind daemon
  SUNRPC: Refactor rpcb_register to make rpcbindv4 support easier
  SUNRPC: None of rpcb_create's callers wants a privileged source port
  SUNRPC: Introduce a specific rpcb_create for contacting localhost
  ...

12 years agoFix FADT parsing
Jan Beulich [Wed, 16 Jul 2008 21:27:08 +0000]
Fix FADT parsing

The (1.0 inherited) separate length fields in the FADT are byte granular.
Further, PM1a/b may have distinct lengths and live in distinct address spaces.
 acpi_tb_convert_fadt() should account for all of these conditions.

Apart from these changes I'm puzzled by the fact that, not just for
acpi_gbl_xpm1{a,b}_enable, acpi_hw_low_level_{read,write}() get an explicit
size passed rather than using the size found in the passed GAS.  What happens
on a platform that defines PM1{a,b} wider than 16 bits?  Of course,
acpi_hw_low_level_{read,write}() at present are entirely un-prepared to deal
with sizes other than 8, 16, or 32, not to speak of a non-zero bit_offset or
access_width...

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

12 years agoAdd the ability to reset the machine using the RESET_REG in ACPI's FADT table.
Aaron Durbin [Wed, 16 Jul 2008 21:27:08 +0000]
Add the ability to reset the machine using the RESET_REG in ACPI's FADT table.

Signed-off-by: Aaron Durbin <adurbin@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

12 years agoACPI: use dev_printk when possible
Bjorn Helgaas [Fri, 27 Jun 2008 14:45:39 +0000]
ACPI: use dev_printk when possible

Convert printks to use dev_printk().  The most obvious change will
be messages like this:

   -ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 31
   +cciss 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

12 years agoPNPACPI: add support for HP vendor-specific CCSR descriptors
Bjorn Helgaas [Fri, 27 Jun 2008 22:57:19 +0000]
PNPACPI: add support for HP vendor-specific CCSR descriptors

The HP CCSR descriptor describes MMIO address space that should appear
as a MEM resource.  This patch adds support for parsing these descriptors
in the _CRS data.

The visible effect of this is that these MEM resources will appear
in /sys/devices/pnp0/.../resources, which means that "lspnp -v" will
report it, user applications can use this to locate device CSR space,
and kernel drivers can use the normal PNP resource accessors to
locate them.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

12 years agoPNP: avoid legacy IDE IRQs
Bjorn Helgaas [Fri, 27 Jun 2008 22:57:18 +0000]
PNP: avoid legacy IDE IRQs

If an IDE controller is in compatibility mode, it expects to use
IRQs 14 and 15, so PNP should avoid them.

This patch should resolve this problem report:
  parallel driver grabs IRQ14 preventing legacy SFF ATA controller from working
  https://bugzilla.novell.com/show_bug.cgi?id=375836

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

12 years agoPNP: convert resource options to single linked list
Bjorn Helgaas [Fri, 27 Jun 2008 22:57:17 +0000]
PNP: convert resource options to single linked list

ISAPNP, PNPBIOS, and ACPI describe the "possible resource settings" of
a device, i.e., the possibilities an OS bus driver has when it assigns
I/O port, MMIO, and other resources to the device.

PNP used to maintain this "possible resource setting" information in
one independent option structure and a list of dependent option
structures for each device.  Each of these option structures had lists
of I/O, memory, IRQ, and DMA resources, for example:

  dev
    independent options
      ind-io0  -> ind-io1  ...
      ind-mem0 -> ind-mem1 ...
      ...
    dependent option set 0
      dep0-io0  -> dep0-io1  ...
      dep0-mem0 -> dep0-mem1 ...
      ...
    dependent option set 1
      dep1-io0  -> dep1-io1  ...
      dep1-mem0 -> dep1-mem1 ...
      ...
    ...

This data structure was designed for ISAPNP, where the OS configures
device resource settings by writing directly to configuration
registers.  The OS can write the registers in arbitrary order much
like it writes PCI BARs.

However, for PNPBIOS and ACPI devices, the OS uses firmware interfaces
that perform device configuration, and it is important to pass the
desired settings to those interfaces in the correct order.  The OS
learns the correct order by using firmware interfaces that return the
"current resource settings" and "possible resource settings," but the
option structures above doesn't store the ordering information.

This patch replaces the independent and dependent lists with a single
list of options.  For example, a device might have possible resource
settings like this:

  dev
    options
      ind-io0 -> dep0-io0 -> dep1->io0 -> ind-io1 ...

All the possible settings are in the same list, in the order they
come from the firmware "possible resource settings" list.  Each entry
is tagged with an independent/dependent flag.  Dependent entries also
have a "set number" and an optional priority value.  All dependent
entries must be assigned from the same set.  For example, the OS can
use all the entries from dependent set 0, or all the entries from
dependent set 1, but it cannot mix entries from set 0 with entries
from set 1.

Prior to this patch PNP didn't keep track of the order of this list,
and it assigned all independent options first, then all dependent
ones.  Using the example above, that resulted in a "desired
configuration" list like this:

  ind->io0 -> ind->io1 -> depN-io0 ...

instead of the list the firmware expects, which looks like this:

  ind->io0 -> depN-io0 -> ind-io1 ...

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoISAPNP: handle independent options following dependent ones
Bjorn Helgaas [Fri, 27 Jun 2008 22:57:16 +0000]
ISAPNP: handle independent options following dependent ones

The ISAPNP spec recommends that independent options precede
dependent ones, but this is not actually required.  The current
ISAPNP code incorrectly puts such trailing independent options
at the end of the last dependent option list.

This patch fixes that bug by resetting the current option list
to the independent list when we see an "End Dependent Functions"
tag.  PNPBIOS and PNPACPI handle this the same way.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoPNP: remove extra 0x100 bit from option priority
Bjorn Helgaas [Fri, 27 Jun 2008 22:57:15 +0000]
PNP: remove extra 0x100 bit from option priority

When building resource options, ISAPNP and PNPBIOS set the priority
to something like "0x100 | PNP_RES_PRIORITY_ACCEPTABLE", but we
immediately mask off the 0x100 again in pnp_build_option(), so that
bit looks superfluous.

Thanks to Rene Herman <rene.herman@gmail.com> for pointing this out.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>