10 years agoBtrfs: check return value of open_bdev_exclusive properly
Josef Bacik [Wed, 27 Jan 2010 02:09:00 +0000]
Btrfs: check return value of open_bdev_exclusive properly

Hit this problem while testing RAID1 failure stuff.  open_bdev_exclusive
returns ERR_PTR(), not NULL.  So change the return value properly.  This
is important if you accidently specify a device that doesn't exist when
trying to add a new device to an array, you will panic the box
dereferencing bdev.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: do not mark the chunk as readonly if in degraded mode
Josef Bacik [Wed, 27 Jan 2010 02:07:59 +0000]
Btrfs: do not mark the chunk as readonly if in degraded mode

If a RAID setup has chunks that span multiple disks, and one of those
disks has failed, btrfs_chunk_readonly will return 1 since one of the
disks in that chunk's stripes is dead and therefore not writeable.  So
instead if we are in degraded mode, return 0 so we can go ahead and
allocate stuff.  Without this patch all of the block groups in a RAID1
setup will end up read-only, which will mean we can't add new disks to
the array since we won't be able to make allocations.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: run orphan cleanup on default fs root
Josef Bacik [Tue, 26 Jan 2010 14:30:53 +0000]
Btrfs: run orphan cleanup on default fs root

This patch revert's commit


Since it introduces this problem where we can run orphan cleanup on a
volume that can have orphan entries re-added.  Instead of my original
fix, Yan Zheng pointed out that we can just revert my original fix and
then run the orphan cleanup in open_ctree after we look up the fs_root.
I have tested this with all the tests that gave me problems and this
patch fixes both problems.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: fix a memory leak in btrfs_init_acl
Yang Hongyang [Tue, 26 Jan 2010 00:48:23 +0000]
Btrfs: fix a memory leak in btrfs_init_acl

In btrfs_init_acl() cloned acl is not released

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: Use correct values when updating inode i_size on fallocate
Aneesh Kumar K.V [Wed, 20 Jan 2010 07:28:54 +0000]
Btrfs: Use correct values when updating inode i_size on fallocate

commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825
Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Date:   Wed Jan 20 12:57:53 2010 +0530

    Btrfs: Use correct values when updating inode i_size on fallocate

    Even though we allocate more, we should be updating inode i_size
    as per the arguments passed

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: remove tree_search() in extent_map.c
Miao Xie [Tue, 15 Dec 2009 06:54:17 +0000]
Btrfs: remove tree_search() in extent_map.c

This patch removes tree_search() in extent_map.c because it is not called by

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: Add mount -o compress-force
Chris Mason [Thu, 28 Jan 2010 21:18:15 +0000]
Btrfs: Add mount -o compress-force

The default btrfs mount -o compress mode will quickly back off
compressing a file if it notices that compression does not reduce the
size of the data being written.  This can save considerable CPU because
all future writes to the file go through uncompressed.

But some files are both very large and have mixed data stored in
them.  In that case, we want to add the ability to always try
compressing data before writing it.

This commit adds mount -o compress-force.  A later commit will add
a new inode flag that does the same thing.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: fix possible panic on unmount
Josef Bacik [Fri, 13 Nov 2009 20:12:59 +0000]
Btrfs: fix possible panic on unmount

We can race with the unmount of an fs and the stopping of a kthread where we
will free the block group before we're done using it.  The reason for this is
because we do not hold a reference on the block group while its caching, since
the allocator drops its reference once it exits or moves on to the next block
group.  This patch fixes the problem by taking a reference to the block group
before we start caching and dropping it when we're done to make sure all
accesses to the block group are safe.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: deal with NULL acl sent to btrfs_set_acl
Chris Mason [Mon, 18 Jan 2010 01:36:18 +0000]
Btrfs: deal with NULL acl sent to btrfs_set_acl

It is legal for btrfs_set_acl to be sent a NULL acl.  This
makes sure we don't dereference it.  A similar patch was sent by
Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>

Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: fix regression in orphan cleanup
Josef Bacik [Fri, 15 Jan 2010 20:08:22 +0000]
Btrfs: fix regression in orphan cleanup

Currently orphan cleanup only ever gets triggered if we cross subvolumes during
a lookup, which means that if we just mount a plain jane fs that has orphans in
it, they will never get cleaned up.  This results in panic's like these


where adding an orphan entry results in -EEXIST being returned and we panic.  In
order to fix this, we check to see on lookup if our root has had the orphan
cleanup done, and if not go ahead and do it.  This is easily reproduceable by
running this testcase

#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>
#include <unistd.h>
#include <stdio.h>

int main(int argc, char **argv)
char data[4096];
char newdata[4096];
int fd1, fd2;

memset(data, 'a', 4096);
memset(newdata, 'b', 4096);

while (1) {
int i;

fd1 = creat("file1", 0666);
if (fd1 < 0)

for (i = 0; i < 512; i++)
write(fd1, data, 4096);


fd2 = creat("file2", 0666);
if (fd2 < 0)

ftruncate(fd2, 4096 * 512);

for (i = 0; i < 512; i++)
write(fd2, newdata, 4096);

i = rename("file2", "file1");

return 0;

and then pulling the power on the box, and then trying to run that test again
when the box comes back up.  I've tested this locally and it fixes the problem.
Thanks to Tomas Carnecky for helping me track this down initially.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Fix race in btrfs_mark_extent_written
Yan, Zheng [Fri, 15 Jan 2010 08:43:09 +0000]
Btrfs: Fix race in btrfs_mark_extent_written

Fix bug reported by Johannes Hirte. The reason of that bug
is btrfs_del_items is called after btrfs_duplicate_item and
btrfs_del_items triggers tree balance. The fix is check that
case and call btrfs_search_slot when needed.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs, fix memory leaks in error paths
Jiri Slaby [Wed, 6 Jan 2010 16:57:22 +0000]
Btrfs, fix memory leaks in error paths

Stanse found 2 memory leaks in relocate_block_group and
__btrfs_map_block. cluster and multi are not freed/assigned on all
paths. Fix that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: align offsets for btrfs_ordered_update_i_size
Yan, Zheng [Mon, 28 Dec 2009 05:01:58 +0000]
Btrfs: align offsets for btrfs_ordered_update_i_size

Some callers of btrfs_ordered_update_i_size can now pass in
a NULL for the ordered extent to update against.  This makes
sure we properly align the offset they pass in when deciding
how much to bump the on disk i_size.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agobtrfs: fix missing last-entry in readdir(3)
Jan Engelhardt [Wed, 9 Dec 2009 22:00:38 +0000]
btrfs: fix missing last-entry in readdir(3)

parent 49313cdac7b34c9f7ecbb1780cfc648b1c082cd7 (v2.6.32-1-g49313cd)
commit ff48c08e1c05c67e8348ab6f8a24de8034e0e34d
Author: Jan Engelhardt <jengelh@medozas.de>
Date:   Wed Dec 9 22:57:36 2009 +0100

Btrfs: fix missing last-entry in readdir(3)

When one does a 32-bit readdir(3), the last entry of a directory is
missing. This is however not due to passing a large value to filldir,
but it seems to have to do with glibc doing telldir or something
quirky. In any case, this patch fixes it in practice.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: make sure fallocate properly starts a transaction
Chris Mason [Thu, 17 Dec 2009 20:47:17 +0000]
Btrfs: make sure fallocate properly starts a transaction

The recent patch to make fallocate enospc friendly would send
down a NULL trans handle to the allocator.  This moves the
transaction start to properly fix things.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: make metadata chunks smaller
Josef Bacik [Mon, 7 Dec 2009 21:45:59 +0000]
Btrfs: make metadata chunks smaller

This patch makes us a bit less zealous about making sure we have enough free
metadata space by pearing down the size of new metadata chunks to 256mb instead
of 1gb.  Also, we used to try an allocate metadata chunks when allocating data,
but that sort of thing is done elsewhere now so we can just remove it.  With my
-ENOSPC test I used to have 3gb reserved for metadata out of 75gb, now I have
1.7gb.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Show discard option in /proc/mounts
Matthew Wilcox [Mon, 14 Dec 2009 22:01:12 +0000]
Btrfs: Show discard option in /proc/mounts

Christoph's patch e244a0aeb6a599c19a7c802cda6e2d67c847b154 doesn't display
the discard option in /proc/mounts, leading to some confusion for me.
Here's the missing bit.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: deny sys_link across subvolumes.
TARUISI Hiroaki [Thu, 12 Nov 2009 07:14:26 +0000]
Btrfs: deny sys_link across subvolumes.

I rebased Christian Parpart's patch to deny hard link across
subvolumes. Original patch modifies also btrfs_rename, but
I excluded it because we can move across subvolumes now and
it make no problem.

Hard link across subvolumes should not allowed in Btrfs.
btrfs_link checks root of 'to' directory is same as root
of 'from' file. If not same, btrfs_link returns -EPERM.

Signed-off-by: TARUISI Hiroaki <taruishi.hiroak@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: fail mount on bad mount options
Sage Weil [Sat, 7 Nov 2009 06:19:16 +0000]
Btrfs: fail mount on bad mount options

We shouldn't silently ignore unrecognized options.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: don't add extent 0 to the free space cache v2
Yan, Zheng [Thu, 26 Nov 2009 09:31:11 +0000]
Btrfs: don't add extent 0 to the free space cache v2

If block group 0 is completely free, btrfs_read_block_groups will
add extent [0, BTRFS_SUPER_INFO_OFFSET) to the free space cache.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Fix per root used space accounting
Yan, Zheng [Thu, 12 Nov 2009 09:36:50 +0000]
Btrfs: Fix per root used space accounting

The bytes_used field in root item was originally planned to
trace the amount of used data and tree blocks. But it never
worked right since we can't trace freeing of data accurately.
This patch changes it to only trace the amount of tree blocks.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Fix btrfs_drop_extent_cache for skip pinned case
Yan, Zheng [Thu, 12 Nov 2009 09:36:44 +0000]
Btrfs: Fix btrfs_drop_extent_cache for skip pinned case

The check for skip pinned case is wrong, it may breaks the
while loop too soon.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Add delayed iput
Yan, Zheng [Thu, 12 Nov 2009 09:36:34 +0000]
Btrfs: Add delayed iput

iput() can trigger new transactions if we are dropping the
final reference, so calling it in btrfs_commit_transaction
may end up deadlock. This patch adds delayed iput to avoid
the issue.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Pass transaction handle to security and ACL initialization functions
Yan, Zheng [Thu, 12 Nov 2009 09:35:27 +0000]
Btrfs: Pass transaction handle to security and ACL initialization functions

Pass transaction handle down to security and ACL initialization
functions, so we can avoid starting nested transactions

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Make truncate(2) more ENOSPC friendly
Yan, Zheng [Thu, 12 Nov 2009 09:35:36 +0000]
Btrfs: Make truncate(2) more ENOSPC friendly

truncating and deleting regular files are unbound operations,
so it's not good to do them in a single transaction. This
patch makes btrfs_truncate and btrfs_delete_inode start a
new transaction after all items in a tree leaf are deleted.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Make fallocate(2) more ENOSPC friendly
Yan, Zheng [Thu, 12 Nov 2009 09:34:52 +0000]
Btrfs: Make fallocate(2) more ENOSPC friendly

fallocate(2) may allocate large number of file extents, so it's not
good to do it in a single transaction. This patch make fallocate(2)
start a new transaction for each file extents it allocates.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Avoid orphan inodes cleanup during committing transaction
Yan, Zheng [Thu, 12 Nov 2009 09:37:02 +0000]
Btrfs: Avoid orphan inodes cleanup during committing transaction

btrfs_lookup_dentry may trigger orphan cleanup, so it's not good
to call it while committing a transaction.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Avoid orphan inodes cleanup while replaying log
Yan, Zheng [Thu, 12 Nov 2009 09:34:40 +0000]
Btrfs: Avoid orphan inodes cleanup while replaying log

We do log replay in a single transaction, so it's not good to do unbound
operations. This patch cleans up orphan inodes cleanup after replaying
the log. It also avoids doing other unbound operations such as truncating
a file during replaying log. These unbound operations are postponed to
the orphan inode cleanup stage.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Fix disk_i_size update corner case
Yan, Zheng [Thu, 12 Nov 2009 09:34:21 +0000]
Btrfs: Fix disk_i_size update corner case

There are some cases file extents are inserted without involving
ordered struct. In these cases, we update disk_i_size directly,
without checking pending ordered extent and DELALLOC bit. This
patch extends btrfs_ordered_update_i_size() to handle these cases.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Rewrite btrfs_drop_extents
Yan, Zheng [Thu, 12 Nov 2009 09:34:08 +0000]
Btrfs: Rewrite btrfs_drop_extents

Rewrite btrfs_drop_extents by using btrfs_duplicate_item, so we can
avoid calling lock_extent within transaction.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Add btrfs_duplicate_item
Yan, Zheng [Thu, 12 Nov 2009 09:33:58 +0000]
Btrfs: Add btrfs_duplicate_item

btrfs_duplicate_item duplicates item with new key, guaranteeing
the source item and the new items are in the same tree leaf and
contiguous. It allows us to split file extent in place, without
using lock_extent to prevent bookend extent race.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: Avoid superfluous tree-log writeout
Yan, Zheng [Thu, 12 Nov 2009 09:33:26 +0000]
Btrfs: Avoid superfluous tree-log writeout

We allow two log transactions at a time, but use same flag
to mark dirty tree-log btree blocks. So we may flush dirty
blocks belonging to newer log transaction when committing a
log transaction. This patch fixes the issue by using two
flags to mark dirty tree-log btree blocks.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoLinux 2.6.32
Linus Torvalds [Thu, 3 Dec 2009 03:51:21 +0000]
Linux 2.6.32

11 years agoVIDEO: Correct use of request_region/request_mem_region
Julia Lawall [Sun, 9 Aug 2009 09:42:32 +0000]
VIDEO: Correct use of request_region/request_mem_region

request_region should be used with release_region, not request_mem_region.

Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c,
the problem is actually the other way around; request_mem_region should be
used instead of request_region.

The semantic patch that finds/fixes this problem is as follows:

// <smpl>
expression start;


expression r1.start;


@depends on !b1@
expression r1.start;
expression E;

- release_mem_region
+ release_region
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoSPI: spi_txx9: Fix bit rate calculation
Atsushi Nemoto [Thu, 3 Sep 2009 13:59:01 +0000]
SPI: spi_txx9: Fix bit rate calculation

TXx9 SPI bit rate is calculated by:
        fBR = (spi-baseclk) / (n + 1)
Fix calculation of min_speed_hz, max_speed_hz and n.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Wed, 2 Dec 2009 23:41:49 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Correct WM831X_MAX_ISEL_VALUE

11 years agoInput: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset list
Anisse Astier [Tue, 1 Dec 2009 09:14:25 +0000]
Input: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset list

These laptops often leave i8042 in a wierd state resulting in non-
operational touchpad and keyboard.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Wed, 2 Dec 2009 23:40:37 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: revert incorrect fix for read error handling in raid1.

11 years agoparam: don't complain about unused module parameters.
Rusty Russell [Tue, 1 Dec 2009 04:26:44 +0000]
param: don't complain about unused module parameters.

Jon confirms that recent modprobe will look in /proc/cmdline, so these
cmdline options can still be used.

See http://bugzilla.kernel.org/show_bug.cgi?id=14164

Reported-by: Adam Williamson <awilliam@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 2 Dec 2009 23:39:20 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: RB532: Fix devices.c compilation.
  MIPS: Fix MIPS I build.

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Wed, 2 Dec 2009 23:38:49 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [PATCH] rc32434_wdt: fix compilation failure
  [WATCHDOG] rc32434_wdt.c: use resource_size()

11 years agomodules: don't export section names of empty sections via sysfs
Helge Deller [Wed, 2 Dec 2009 23:29:15 +0000]
modules: don't export section names of empty sections via sysfs

On the parisc architecture we face for each and every loaded kernel module
this kernel "badness warning":
  sysfs: cannot create duplicate filename '/module/ac97_bus/sections/.text'
  Badness at fs/sysfs/dir.c:487

Reason for that is, that on parisc all kernel modules do have multiple
.text sections due to the usage of the -ffunction-sections compiler flag
which is needed to reach all jump targets on this platform.

An objdump on such a kernel module gives:
Idx Name          Size      VMA       LMA       File off  Algn
  0 .note.gnu.build-id 00000024  00000000  00000000  00000034  2**2
  1 .text         00000000  00000000  00000000  00000058  2**0
  2 .text.ac97_bus_match 0000001c  00000000  00000000  00000058  2**2
  3 .text         00000000  00000000  00000000  000000d4  2**0
Since the .text sections are empty (size of 0 bytes) and won't be
loaded by the kernel module loader anyway, I don't see a reason
why such sections need to be listed under
/sys/module/<module_name>/sections/<section_name> either.

The attached patch does solve this issue by not exporting section
names which are empty.

This fixes bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=14703

Signed-off-by: Helge Deller <deller@gmx.de>
CC: rusty@rustcorp.com.au
CC: akpm@linux-foundation.org
CC: James.Bottomley@HansenPartnership.com
CC: roland@redhat.com
CC: dave@hiauly1.hia.nrc.ca
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Wed, 2 Dec 2009 20:44:42 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: Initialise wm831x structure pointor for ISINK driver

11 years agoregulator: Initialise wm831x structure pointor for ISINK driver
Mark Brown [Mon, 30 Nov 2009 14:01:56 +0000]
regulator: Initialise wm831x structure pointor for ISINK driver

The version that made it into mainline missed the initialisation of the
chip handle.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoMIPS: RB532: Fix devices.c compilation.
Florian Fainelli [Wed, 2 Dec 2009 12:07:01 +0000]
MIPS: RB532: Fix devices.c compilation.

We should now use dev_set_drvdata to set the driver driver_data field.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: Fix MIPS I build.
Ralf Baechle [Wed, 2 Dec 2009 11:33:03 +0000]
MIPS: Fix MIPS I build.

Broken by d63c63e889bbeeaa461a8addf1245f89f3ce4ece (lmo) rsp.
f1e39a4a616cd9981a9decfd5332fd07a01abb8b (kernel.org).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/746/

11 years agoMerge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
Linus Torvalds [Wed, 2 Dec 2009 16:21:58 +0000]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6

* 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6:
  [ARM] pxamci: call mmc_remove_host() before freeing resources

11 years ago[ARM] pxamci: call mmc_remove_host() before freeing resources
Daniel Mack [Tue, 1 Dec 2009 17:17:18 +0000]
[ARM] pxamci: call mmc_remove_host() before freeing resources

mmc_remove_host() will cause the mmc core to switch off the bus power by
eventually calling pxamci_set_ios(). This function uses the regulator or
the GPIO which have been freed already.

This causes the following Oops on module unload.

[   49.519649] Unable to handle kernel paging request at virtual address 30303a70
[   49.526878] pgd = c7084000
[   49.529563] [30303a70] *pgd=00000000
[   49.533136] Internal error: Oops: 5 [#1]
[   49.537025] last sysfs file: /sys/devices/platform/pxa27x-ohci/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_level
[   49.547471] Modules linked in: pxamci(-) eeti_ts
[   49.552061] CPU: 0    Not tainted  (2.6.32-rc8 #322)
[   49.557001] PC is at regulator_is_enabled+0x3c/0xbc
[   49.561846] LR is at regulator_is_enabled+0x30/0xbc
[   49.566691] pc : [<c01a2448>]    lr : [<c01a243c>]    psr: 60000013
[   49.566702] sp : c7083e70  ip : 30303a30  fp : 00000000
[   49.578093] r10: c705e200  r9 : c7082000  r8 : c705e2e0
[   49.583280] r7 : c7061340  r6 : c7061340  r5 : c7083e70  r4 : 00000000
[   49.589759] r3 : c04dc434  r2 : c04dc434  r1 : c03eecea  r0 : 00000047
[   49.596241] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   49.603329] Control: 0000397f  Table: a7084018  DAC: 00000015
[   49.609031] Process rmmod (pid: 1101, stack limit = 0xc7082278)
[   49.614908] Stack: (0xc7083e70 to 0xc7084000)
[   49.619238] 3e60:                                     c7082000 c703c4f8 c705ea00 c04f4074
[   49.627366] 3e80: 00000000 c705e3a0 ffffffff c0247ddc c70361a0 00000000 c705e3a0 ffffffff
[   49.635499] 3ea0: c705e200 bf006400 c78c4f00 c705e200 c705e3a0 ffffffff c705e200 ffffffff
[   49.643633] 3ec0: c04d8ac8 c02476d0 ffffffff c0247c60 c705e200 c0248678 c705e200 c0249064
[   49.651765] 3ee0: ffffffff bf006204 c04d8ad0 c04d8ad0 c04d8ac8 bf007490 00000880 c00440c4
[   49.659898] 3f00: 0000b748 c01c5708 bf007490 c01c44c8 c04d8ac8 c04d8afc bf007490 c01c4570
[   49.668031] 3f20: bf007490 bf00750c c04f4258 c01c37a4 00000000 bf00750c c7083f44 c007b014
[   49.676162] 3f40: 4000d000 6d617870 08006963 00000001 00000000 c7085000 00000001 00000000
[   49.684287] 3f60: 4000d000 c7083f8c 00000001 bea01a54 00005401 c7ab1400 c00440c4 00082000
[   49.692420] 3f80: bf00750c 00000880 c7083f8c 00000000 4000cfa8 00000000 00000880 bea01cc8
[   49.700552] 3fa0: 00000081 c0043f40 00000000 00000880 bea01cc8 00000880 00000006 00000000
[   49.708677] 3fc0: 00000000 00000880 bea01cc8 00000081 00000097 0000cca4 0000b748 00000000
[   49.716802] 3fe0: 4001a4f0 bea01cc0 00018bf4 4001a4fc 20000010 bea01cc8 a063e021 a063e421
[   49.724958] [<c01a2448>] (regulator_is_enabled+0x3c/0xbc) from [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8)
[   49.734836] [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8) from [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci])
[   49.745044] [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci]) from [<c02476d0>] (mmc_power_off+0x50/0x58)
[   49.754555] [<c02476d0>] (mmc_power_off+0x50/0x58) from [<c0247c60>] (mmc_detach_bus+0x68/0xc4)
[   49.763207] [<c0247c60>] (mmc_detach_bus+0x68/0xc4) from [<c0248678>] (mmc_stop_host+0xd4/0x1bc)
[   49.771944] [<c0248678>] (mmc_stop_host+0xd4/0x1bc) from [<c0249064>] (mmc_remove_host+0xc/0x20)
[   49.780681] [<c0249064>] (mmc_remove_host+0xc/0x20) from [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci])
[   49.790211] [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci]) from [<c01c5708>] (platform_drv_remove+0x1c/0x24)
[   49.800164] [<c01c5708>] (platform_drv_remove+0x1c/0x24) from [<c01c44c8>] (__device_release_driver+0x7c/0xc4)
[   49.810110] [<c01c44c8>] (__device_release_driver+0x7c/0xc4) from [<c01c4570>] (driver_detach+0x60/0x8c)
[   49.819535] [<c01c4570>] (driver_detach+0x60/0x8c) from [<c01c37a4>] (bus_remove_driver+0x90/0xcc)
[   49.828452] [<c01c37a4>] (bus_remove_driver+0x90/0xcc) from [<c007b014>] (sys_delete_module+0x1d8/0x254)
[   49.837891] [<c007b014>] (sys_delete_module+0x1d8/0x254) from [<c0043f40>] (ret_fast_syscall+0x0/0x28)
[   49.847145] Code: eb06c53a e596c030 e1a0500d e59f106c (e59c0040)
[   49.853566] ---[ end trace b5fa66a00cea142f ]---

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@kernel.org
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

11 years ago[PATCH] rc32434_wdt: fix compilation failure
Florian Fainelli [Wed, 2 Dec 2009 12:21:23 +0000]
[PATCH] rc32434_wdt: fix compilation failure

This patch fixes the compilation failure of
rc32434 due to a bad module parameter description.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

11 years ago[WATCHDOG] rc32434_wdt.c: use resource_size()
H Hartley Sweeten [Wed, 25 Nov 2009 02:06:26 +0000]
[WATCHDOG] rc32434_wdt.c: use resource_size()

The size value passed to ioremap_nocache() is not correct.
Use resource_size() to get the correct value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

11 years agosysfs: fix SYSFS_DEPRECATED_V2 prompt
Randy Dunlap [Tue, 1 Dec 2009 21:17:50 +0000]
sysfs: fix SYSFS_DEPRECATED_V2 prompt

The SYSFS_DEPRECATED_V2 says "remove" older, deprecated features, but it
actually enables them, so correct this confusing, backwards text.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agortc-x1205: reset clock to sane state after power failure
Johannes Weiner [Tue, 1 Dec 2009 21:17:49 +0000]
rtc-x1205: reset clock to sane state after power failure

When detecting power failure, the probe function would reset the clock
time to defined state.

However, the clock's _date_ might still be bogus and a subsequent probe
fails when sanity-checking these values.

Change the power-failure fixup code to do a full setting of rtc_time,
including a valid date.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agortc-x1205: fix rtc_time to y2k register value conversion
Johannes Weiner [Tue, 1 Dec 2009 21:17:48 +0000]
rtc-x1205: fix rtc_time to y2k register value conversion

The possible CCR_Y2K register values are 19 or 20 and struct rtc_time's
tm_year is in years since 1900.

The function translating rtc_time to register values assumes tm_year to be
years since first christmas, though, and we end up storing 0 or 1 in the
CCR_Y2K register, which the hardware does not refuse to do.

A subsequent probing of the clock fails due to the invalid value range in
the register, though.

[ And if it didn't, reading the clock would yield a bogus year because
  the function translating registers to tm_year is assuming a register
  value of 19 or 20. ]

This fixes the conversion from years since 1900 in tm_year to the
corresponding CCR_Y2K value of 19 or 20.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoaoe: prevent cache aliases
Peter Horton [Tue, 1 Dec 2009 21:17:46 +0000]
aoe: prevent cache aliases

Prevent the AoE block driver from creating cache aliases of page cache
pages on machines with virtually indexed caches.

Building kernels on an AT91SAM9G20 board without this patch fails with
segmentation faults after a couple of passes.

Signed-off-by: Peter Horton <zero@colonel-panic.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agogpio: Langwell GPIO driver bugfixes
Alek Du [Tue, 1 Dec 2009 21:17:45 +0000]
gpio: Langwell GPIO driver bugfixes

- Remove wrong and unnecessary unmask operation

- Remove extra GEDR reading

This fixes the loss of interrupts which occurs when two or more pins are
triggered in close succession.

Signed-off-by: Alek Du <alek.du@intel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agokbuild: stepping down as maintainer
Sam Ravnborg [Tue, 1 Dec 2009 21:17:44 +0000]
kbuild: stepping down as maintainer

It has been fun but the last year or more it has been a duty and a burden.
So I leave it open for others to take over.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Anibal Monsalve Salazar <anibal@debian.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodavinci: fb: fix frame buffer driver issues
Sudhakar Rajashekhara [Tue, 1 Dec 2009 21:17:43 +0000]
davinci: fb: fix frame buffer driver issues

Following issues have been addressed on DA8XX/OMAP-L1XX:

a. Screen misalignment during booting when frame buffer console is

b. Driver was configured always in PSEUDOCOLOR mode.  This patch
   dynamically configures the driver either in PSEUDOCOLOUR or TRUECOLOR
   mode depending on bpp.

c. The RED and BLUE offsets were interchanged resulting in wrong
   bootup logo colour.

This patch has been tested on DA830/OMAP-L137 and DA850/OMAP-L138 EVMs.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Steve Chen <schen@mvista.com>
Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodrivers/rtc/rtc-pcf50633.c: fix use after free in pcf50633_rtc_probe()
Dan Carpenter [Tue, 1 Dec 2009 21:17:41 +0000]
drivers/rtc/rtc-pcf50633.c: fix use after free in pcf50633_rtc_probe()

"rtc" is freed and then dereferenced on the next line.  This patch fixes

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodrivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.h
Andrew Morton [Tue, 1 Dec 2009 21:17:41 +0000]
drivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.h


  v4l/dvb_frontend.c: In function 'dvb_frontend_stop':
  v4l/dvb_frontend.c:707: error: implicit declaration of function 'init_MUTEX'

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14609

Reported-by: <tstrelar@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Tue, 1 Dec 2009 18:41:40 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: update TODO files
  Staging: hv: Fix some missing author names
  Staging: hv: Fix vmbus event handler bug
  Staging: hv: Fix argument order in incorrect memset invocations in hyperv driver.

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Tue, 1 Dec 2009 18:41:05 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
  USB: work around for EHCI with quirky periodic schedules
  USB: musb: Fix CPPI IRQs not being signaled
  USB: musb: respect usb_request->zero in control requests
  USB: musb: fix ISOC Tx programming for CPPI DMAs
  USB: musb: Remove unwanted message in boot log
  usb: amd5536udc: fixed shared interrupt bug and warning oops
  USB: ftdi_sio: Keep going when write errors are encountered.
  USB: musb_gadget: fix STALL handling
  USB: EHCI: don't send Clear-TT-Buffer following a STALL

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Tue, 1 Dec 2009 18:40:51 +0000]
Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/of_serial: add missing ns16550a id
  bcm63xx_uart: Fix serial driver compile breakage.
  tty_port: handle the nonblocking open of a dead port corner case

11 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 1 Dec 2009 16:26:44 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Loongson: Switch from flatmem to sparsemem
  MIPS: Loongson: Disallow 4kB pages
  MIPS: Add missing definition for MADV_HWPOISON.
  MIPS: Fix build error if __xchg() is not getting inlined.
  MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.

11 years agoMIPS: Loongson: Switch from flatmem to sparsemem
Wu Zhangjin [Tue, 1 Dec 2009 06:55:42 +0000]
MIPS: Loongson: Switch from flatmem to sparsemem

With flatmem hibernation for Loongson will fail, and there are also some
other problems such as broken files when using NFS or CIFS / Samba.

The config help of sparsemem says:

"This option provides some potential performance benefits, along with
decreased code complexity."

So to avoid the potential problems of FLATMEM, we disable FLATMEM directly
and use SPARSEMEM instead.

Related email thread:


Reported-by: Tatu Kilappa <tatu.kilappa@gmail.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/737/
Cc: linux-mips@linux-mips.org
Cc: zhangfx@lemote.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: Loongson: Disallow 4kB pages
Wu Zhangjin [Tue, 1 Dec 2009 06:55:25 +0000]
MIPS: Loongson: Disallow 4kB pages

Currently, with PAGE_SIZE_4KB, the kernel for loongson will hang on:

Kernel panic - not syncing: Attempted to kill init!

The possible reason is the cache aliases problem:

Loongson 2F has 64kb, 4 way L1 Cache, the way size is 16kb, which is bigger
then 4kb. so, If using 4kb page size, there is cache aliases problem.
To avoid this kind of problem, extra cache flushing.  The 2nd possible
solution is 16kb page size which avoids cache aliases without the need for
extra cache flushes.  So we disable 4kB pages until the aliasing issue is

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/736/
Cc: linux-mips@linux-mips.org
Cc: zhangfx@lemote.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: Add missing definition for MADV_HWPOISON.
Ralf Baechle [Thu, 26 Nov 2009 18:28:42 +0000]
MIPS: Add missing definition for MADV_HWPOISON.

Thanks to Joseph S. Myers for reporting this.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Joseph S. Myers" <joseph@codesourcery.com>
Patchwork: http://patchwork.linux-mips.org/patch/723/

11 years agoMIPS: Fix build error if __xchg() is not getting inlined.
Ralf Baechle [Tue, 24 Nov 2009 13:16:02 +0000]
MIPS: Fix build error if __xchg() is not getting inlined.

If __xchg() is not getting inlined the outline version of the function
will have a reference to __xchg_called_with_bad_pointer() which does not
exist remaining.  Fixed by using BUILD_BUG_ON() to check for allowable
operand sizes.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/705/

11 years agoMIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.
Martin Michlmayr [Thu, 19 Nov 2009 16:40:09 +0000]
MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.

Some Debian users have reported that the kernel hangs early during boot on
some IP22 systems.  Thomas Bogendoerfer found that this is due to a "bad
interaction between CONFIG_EARLY_PRINTK and overwritten prom memory during
early boot".  Since there's no fix yet, disable CONFIG_EARLY_PRINTK for now.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Cc: linux-mips@linux-mips.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/702/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoSLOW_WORK: Move slow_work's proc file to debugfs
David Howells [Tue, 1 Dec 2009 15:36:11 +0000]
SLOW_WORK: Move slow_work's proc file to debugfs

Move slow_work's debugging proc file to debugfs.

Signed-off-by: David Howells <dhowells@redhat.com>
Requested-and-acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88...
Linus Torvalds [Tue, 1 Dec 2009 15:36:23 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Fixup last users of irq_chip->typename
  Alpha: Rearrange thread info flags fixing two regressions
  arch/alpha/kernel: Add kmalloc NULL tests
  arch/alpha/kernel/sys_ruffian.c: Use DIV_ROUND_CLOSEST

11 years agoCacheFiles: Update IMA counters when using dentry_open
Marc Dionne [Tue, 1 Dec 2009 14:09:24 +0000]
CacheFiles: Update IMA counters when using dentry_open

When IMA is active, using dentry_open without updating the
IMA counters will result in free/open imbalance errors when
fput is eventually called.

Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoSLOW_WORK: Fix the CONFIG_MODULES=n case
David Howells [Tue, 1 Dec 2009 13:52:08 +0000]

Commits 3d7a641 ("SLOW_WORK: Wait for outstanding work items belonging to a
module to clear") introduced some code to make sure that all of a module's
slow-work items were complete before that module was removed, and commit
3bde31a ("SLOW_WORK: Allow a requeueable work item to sleep till the thread is
needed") further extended that, breaking it in the process if CONFIG_MODULES=n:

CC kernel/slow-work.o
  kernel/slow-work.c: In function 'slow_work_execute':
  kernel/slow-work.c:313: error: 'slow_work_thread_processing' undeclared (first use in this function)
  kernel/slow-work.c:313: error: (Each undeclared identifier is reported only once
  kernel/slow-work.c:313: error: for each function it appears in.)
  kernel/slow-work.c: In function 'slow_work_wait_for_items':
  kernel/slow-work.c:950: error: 'slow_work_unreg_sync_lock' undeclared (first use in this function)
  kernel/slow-work.c:951: error: 'slow_work_unreg_wq' undeclared (first use in this function)
  kernel/slow-work.c:961: error: 'slow_work_unreg_work_item' undeclared (first use in this function)
  kernel/slow-work.c:974: error: 'slow_work_unreg_module' undeclared (first use in this function)
  kernel/slow-work.c:977: error: 'slow_work_thread_processing' undeclared (first use in this function)
  make[1]: *** [kernel/slow-work.o] Error 1

Fix this by:

 (1) Extracting the bits of slow_work_execute() that are contingent on
     CONFIG_MODULES, and the bits that should be, into inline functions and
     placing them into the #ifdef'd section that defines the relevant variables
     and adding stubs for moduleless kernels.  This allows the removal of some

 (2) #ifdef'ing out the contents of slow_work_wait_for_items() in moduleless

The four functions related to handling module unloading synchronisation (and
their associated variables) could be offloaded into a separate .c file, but
each function is only used once and three of them are tiny, so doing so would
prevent them from being inlined.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago9p: fix build breakage introduced by FS-Cache
David Howells [Tue, 1 Dec 2009 13:38:45 +0000]
9p: fix build breakage introduced by FS-Cache

While building 2.6.32-rc8-git2 for Fedora I noticed the following thinko
in commit 201a15428bd54f83eccec8b7c64a04b8f9431204 ("FS-Cache: Handle
pages pending storage that get evicted under OOM conditions"):

  fs/9p/cache.c: In function '__v9fs_fscache_release_page':
  fs/9p/cache.c:346: error: 'vnode' undeclared (first use in this function)
  fs/9p/cache.c:346: error: (Each undeclared identifier is reported only once
  fs/9p/cache.c:346: error: for each function it appears in.)
  make[2]: *** [fs/9p/cache.o] Error 1

Fix the 9P filesystem to correctly construct the argument to

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com> [from identical patch]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [from identical patch]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomfd: Correct WM831X_MAX_ISEL_VALUE
Mark Brown [Mon, 30 Nov 2009 13:24:18 +0000]
mfd: Correct WM831X_MAX_ISEL_VALUE

There was confusion between the array size and the highest ISEL
value possible.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

11 years agomd: revert incorrect fix for read error handling in raid1.
NeilBrown [Tue, 1 Dec 2009 06:30:59 +0000]
md: revert incorrect fix for read error handling in raid1.

commit 4706b349f was a forward port of a fix that was needed
for SLES10.  But in fact it is not needed in mainline because
the earlier commit dd00a99e7a fixes the same problem in a
better way.
Further, this commit introduces a bug in the way it interacts with
the automatic read-error-correction.  If, after a read error is
successfully corrected, the same disk is chosen to re-read - the
re-read won't be attempted but an error will be returned instead.

After reverting that commit, there is the possibility that a
read error on a read-only array (where read errors cannot
be corrected as that requires a write) will repeatedly read the same
device and continue to get an error.
So in the "Array is readonly" case, fail the drive immediately on
a read error.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org

11 years agoalpha: Fixup last users of irq_chip->typename
Thomas Gleixner [Tue, 1 Dec 2009 03:51:31 +0000]
alpha: Fixup last users of irq_chip->typename

The typename member of struct irq_chip was kept for migration purposes
and is obsolete since more than 2 years. Fix up the leftovers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>

11 years agoAlpha: Rearrange thread info flags fixing two regressions
Michael Cree [Tue, 1 Dec 2009 03:44:40 +0000]
Alpha: Rearrange thread info flags fixing two regressions

The removal of the TIF_NOTIFY_RESUME flag, commit a583f1b54249b
"remove unused TIF_NOTIFY_RESUME flag," resulted in incorrect
setting of the unaligned access control flags by the prctl syscall.

The re-addition of the TIF_NOTIFY_RESUME flag, commit d0420c83f39f
"KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]"
further caused problems, namely incorrect operands to assembler code
as evidenced by:

AS      arch/alpha/kernel/entry.o
arch/alpha/kernel/entry.S: Assembler messages:
arch/alpha/kernel/entry.S:326: Warning: operand out of range
(0x0000000000000406 is not between 0x0000000000000000 and

Both regressions fixed by (1) rearranging TIF_NOTIFY_RESUME flag to be
in lower 8 bits of the thread info flags, and (2) making sure that
ALPHA_UAC_SHIFT matches the rearrangement of the thread info flags.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: David Howells <dhowells@redhat.com>,
Signed-off-by: Matt Turner <mattst88@gmail.com>

11 years agoMerge branch 'security' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
Linus Torvalds [Tue, 1 Dec 2009 00:47:16 +0000]
Merge branch 'security' of git://git./linux/kernel/git/linville/wireless-2.6

* 'security' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6:
  mac80211: fix spurious delBA handling
  mac80211: fix two remote exploits

11 years agoUSB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
Gernot Hillier [Fri, 27 Nov 2009 12:49:23 +0000]
USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver

This patch adds the vendor and device id for the Mobilcom Debitel UMTS surf
stick (a.k.a. 4G Systems XSStick W14, MobiData MBD-200HU, ...).

To see these ids, you need to switch the stick to modem operation first
with the help of usb_modeswitch. This makes it switch from 1c9e:f000 to
1c9e:9603 and thus be recognized by the option driver.

Signed-off-by: Gernot Hillier <gernot@hillier.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: work around for EHCI with quirky periodic schedules
Oliver Neukum [Fri, 27 Nov 2009 14:17:59 +0000]
USB: work around for EHCI with quirky periodic schedules

a quirky chipset needs periodic schedules to run for a minimum
time before they can be disabled again. This enforces the requirement
with a time stamp and a calculated delay

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: musb: Fix CPPI IRQs not being signaled
Daniel Glöckner [Tue, 17 Nov 2009 09:52:57 +0000]
USB: musb: Fix CPPI IRQs not being signaled

On tx channel abort a cppi interrupt is generated for a short time by
setting the lowest bit of the TCPPICOMPPTR register. It is then reset
immediately by clearing the bit. When the interrupt handler is run,
it does not detect an interrupt in the TCPPIMSKSR or RCPPIMSKSR
registers and thus exits early without writing the TCPPIEOIR register.
It appears that this inhibits further cppi interrupts until the handler
is called by chance, f.ex. from davinci_interrupt().

By moving the unmasking of the interrupt below the writes to
TCPPICOMPPTR, no interrupt is generated and no write to TCPPIEOIR is

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: musb: respect usb_request->zero in control requests
Daniel Glöckner [Tue, 17 Nov 2009 09:52:56 +0000]
USB: musb: respect usb_request->zero in control requests

In gadget mode the answer to a control request should be followed by
a zero-length packet if the amount transferred is an exact multiple of
the endpoint's packet size and the requests has its "zero" flag set.

This patch prevents the request from being immediately removed from the
queue when a control IN transfer ends on a full packet and "zero" is set.
The next time ep0_txstate is entered, a zero-length packet is queued and
the request is removed as fifo_count is 0.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: musb: fix ISOC Tx programming for CPPI DMAs
Ajay Kumar Gupta [Tue, 17 Nov 2009 09:52:55 +0000]
USB: musb: fix ISOC Tx programming for CPPI DMAs

Isochronous Tx DMA is getting programmed but never getting started
for CPPI and TUSB DMAs and thus Isochronous Tx doesn't work.

Fixing it by starting DMAs using musb_h_tx_dma_start().

Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Babu Ravi <ravibabu@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: musb: Remove unwanted message in boot log
Ajay Kumar Gupta [Tue, 17 Nov 2009 09:52:54 +0000]
USB: musb: Remove unwanted message in boot log

Removes below unnecessary log of almost 28 lines during boot.

musb_hdrc: hw_ep 0shared, max 64
musb_hdrc: hw_ep 1tx, max 512
musb_hdrc: hw_ep 1rx, max 512
musb_hdrc: hw_ep 13shared, max 4096
musb_hdrc: hw_ep 14shared, max 1024
musb_hdrc: hw_ep 15shared, max 1024

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb: amd5536udc: fixed shared interrupt bug and warning oops
Thomas Dahlmann [Tue, 17 Nov 2009 22:18:27 +0000]
usb: amd5536udc: fixed shared interrupt bug and warning oops

- fixed shared interrupt bug reported by Vadim Lobanov
 - fixed possible warning oops on driver unload when connected
 - prevent interrupt flood in PIO mode ("modprobe amd5536udc use_dma=0")
   when using gadget ether

Signed-off-by: Thomas Dahlmann <dahlmann.thomas@arcor.de>
Cc: Robert Richter <robert.richter@amd.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: ftdi_sio: Keep going when write errors are encountered.
Eric W. Biederman [Wed, 18 Nov 2009 03:10:48 +0000]
USB: ftdi_sio: Keep going when write errors are encountered.

The use of urb->actual_length to update tx_outstanding_bytes
implicitly assumes that the number of bytes actually written is the
same as the number of bytes we tried to write.  On error that
assumption is violated so just use transfer_buffer_length the number
of bytes we intended to write to the device.

If an error occurs we need to fall through and call
usb_serial_port_softint to wake up processes waiting in

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: musb_gadget: fix STALL handling
Sergei Shtylyov [Wed, 18 Nov 2009 19:51:18 +0000]
USB: musb_gadget: fix STALL handling

The driver incorrectly cancels the mass-storage device CSW request
(which leads to device reset) due to giving back URB at the head of
endpoint's queue after sending each STALL handshake; stop doing that
and start checking for the queue being non-empty before stalling an
endpoint and disallowing stall in such case in musb_gadget_set_halt()
like the other gadget drivers do.

Moreover, the driver starts Rx request despite of the endpoint being
halted -- fix this by moving the SendStall bit check from musb_g_rx()
to rxstate().  And we also sometimes get into rxstate() with DMA still
active after clearing an endpoint's halt (not clear why), so bail out
in this case, similarly to what txstate() does...

While at it, also do the following changes :

- in musb_gadget_set_halt(), remove pointless Tx FIFO flushing (the
  driver does not allow stalling with non-empty Tx FIFO anyway);

- in rxstate(), stop pointlessly zeroing the 'csr' variable;

- in musb_gadget_set_halt(), move the 'done' label to a more proper

- in musb_g_rx(), eliminate the 'done' label completely...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: EHCI: don't send Clear-TT-Buffer following a STALL
Alan Stern [Wed, 18 Nov 2009 16:37:15 +0000]
USB: EHCI: don't send Clear-TT-Buffer following a STALL

This patch (as1304) fixes a regression in ehci-hcd.  Evidently some
hubs don't handle Clear-TT-Buffer requests correctly, so we should
avoid sending them when they don't appear to be absolutely necessary.
The reported symptom is that output on a downstream audio device cuts
out because the hub stops relaying isochronous packets.

The patch prevents Clear-TT-Buffer requests from being sent following
a STALL handshake.  In theory a STALL indicates either that the
downstream device sent a STALL or that no matching TT buffer could be
found.  In either case, the transfer is completed and the TT buffer
does not remain busy, so it doesn't need to be cleared.

Also, the patch fixes a minor flaw in the code that actually sends the
Clear-TT-Buffer requests.  Although the pipe direction isn't really
used for control transfers, it should be a Send rather than a Receive.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Javier Kohen <jkohen@users.sourceforge.net>
CC: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: update TODO files
Bartlomiej Zolnierkiewicz [Wed, 21 Oct 2009 12:42:11 +0000]
Staging: update TODO files

Remove my mail address.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: hv: Fix some missing author names
Haiyang Zhang [Mon, 23 Nov 2009 17:00:22 +0000]
Staging: hv: Fix some missing author names

Fix some missing author names.
They were accidentally removed by someone within Microsoft before the
files were sent for inclusion in the kernel.

Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: hv: Fix vmbus event handler bug
Haiyang Zhang [Fri, 20 Nov 2009 16:29:17 +0000]
Staging: hv: Fix vmbus event handler bug

The flag ENABLE_POLLING is always enabled in original Makefile, but
accidently removed during porting to mainline kernel. The patch fixes
this bug which can cause stalled network communication.  Credit needs to
go to Eric Sesterhenn <eric.sesterhenn@lsexperts.de> For pointing out a
typo in the original code as well.

Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: hv: Fix argument order in incorrect memset invocations in hyperv driver.
Dave Jones [Wed, 11 Nov 2009 21:57:03 +0000]
Staging: hv: Fix argument order in incorrect memset invocations in hyperv driver.

Nearly every invocation of memset in drivers/staging/hv/StorVsc.c has
its arguments the wrong way around.

Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agotty/of_serial: add missing ns16550a id
Michal Simek [Tue, 24 Nov 2009 10:22:41 +0000]
tty/of_serial: add missing ns16550a id

Many boards have a bug-free ns16550 compatible serial port, which we should
register as PORT_16550A. This introduces a new value "ns16550a" for the
compatible property of of_serial to let a firmware choose that model instead
of using the crippled PORT_16550 mode.

Reported-by: Alon Ziv <alonz@nolaviz.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agobcm63xx_uart: Fix serial driver compile breakage.
Maxime Bizon [Sun, 15 Nov 2009 04:42:18 +0000]
bcm63xx_uart: Fix serial driver compile breakage.

The driver missed a small API change while sitting in Ralf's tree, this
patch makes it compile again.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agotty_port: handle the nonblocking open of a dead port corner case
Alan Cox [Wed, 18 Nov 2009 14:12:58 +0000]
tty_port: handle the nonblocking open of a dead port corner case

Some drivers allow O_NDELAY of a dead port (eg for setserial to work). In that
situation we must not try to raise the carrier.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Mon, 30 Nov 2009 23:21:50 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] fix crash when disconnecting usb storage
  [SCSI] fix async scan add/remove race resulting in an oops
  [SCSI] sd: Return correct error code for DIF

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Mon, 30 Nov 2009 23:17:24 +0000]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: gcm - fix another complete call in complete fuction
  crypto: padlock-aes - Use the correct mask when checking whether copying is required

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier...
Linus Torvalds [Mon, 30 Nov 2009 22:51:29 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: fix SMP build error in start_thread()
  Blackfin: fix memset in smp_send_reschedule() and -stop()
  Blackfin: fix typo in ptrace poking
  Blackfin: check for anomaly 05000475
  Blackfin: work around testset anomaly 05000477
  Blackfin: update anomaly lists
  Blackfin: fix cache Kconfig typo
  Blackfin: fix suspend/resume failure with some on-chip ROMs

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Mon, 30 Nov 2009 22:51:01 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix sparse warning
  [CIFS] Duplicate data on appending to some Samba servers
  [CIFS] fix oops in cifs_lookup during net boot

11 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Mon, 30 Nov 2009 22:50:44 +0000]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  at24: Use timeout also for read
  i2c: Fix userspace_device list corruption
  MAINTAINERS: Add missing i2c files
  i2c/tsl2550: Fix lux value in extended mode