11 years agoMerge branch 'for-2.6.31' of git://fieldses.org/git/linux-nfsd
Linus Torvalds [Mon, 22 Jun 2009 19:55:50 +0000]
Merge branch 'for-2.6.31' of git://fieldses.org/git/linux-nfsd

* 'for-2.6.31' of git://fieldses.org/git/linux-nfsd: (60 commits)
  SUNRPC: Fix the TCP server's send buffer accounting
  nfsd41: Backchannel: minorversion support for the back channel
  nfsd41: Backchannel: cleanup nfs4.0 callback encode routines
  nfsd41: Remove ip address collision detection case
  nfsd: optimise the starting of zero threads when none are running.
  nfsd: don't take nfsd_mutex twice when setting number of threads.
  nfsd41: sanity check client drc maxreqs
  nfsd41: move channel attributes from nfsd4_session to a nfsd4_channel_attr struct
  NFS: kill off complicated macro 'PROC'
  sunrpc: potential memory leak in function rdma_read_xdr
  nfsd: minor nfsd_vfs_write cleanup
  nfsd: Pull write-gathering code out of nfsd_vfs_write
  nfsd: track last inode only in use_wgather case
  sunrpc: align cache_clean work's timer
  nfsd: Use write gathering only with NFSv2
  NFSv4: kill off complicated macro 'PROC'
  NFSv4: do exact check about attribute specified
  knfsd: remove unreported filehandle stats counters
  knfsd: fix reply cache memory corruption
  knfsd: reply cache cleanups
  ...

11 years agoMerge branch 'for-2.6.31' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Mon, 22 Jun 2009 19:53:06 +0000]
Merge branch 'for-2.6.31' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'for-2.6.31' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (128 commits)
  nfs41: sunrpc: xprt_alloc_bc_request() should not use spin_lock_bh()
  nfs41: Move initialization of nfs4_opendata seq_res to nfs4_init_opendata_res
  nfs: remove unnecessary NFS_INO_INVALID_ACL checks
  NFS: More "sloppy" parsing problems
  NFS: Invalid mount option values should always fail, even with "sloppy"
  NFS: Remove unused XDR decoder functions
  NFS: Update MNT and MNT3 reply decoding functions
  NFS: add XDR decoder for mountd version 3 auth-flavor lists
  NFS: add new file handle decoders to in-kernel mountd client
  NFS: Add separate mountd status code decoders for each mountd version
  NFS: remove unused function in fs/nfs/mount_clnt.c
  NFS: Use xdr_stream-based XDR encoder for MNT's dirpath argument
  NFS: Clean up MNT program definitions
  lockd: Don't bother with RPC ping for NSM upcalls
  lockd: Update NSM state from SM_MON replies
  NFS: Fix false error return from nfs_callback_up() if ipv6.ko is not available
  NFS: Return error code from nfs_callback_up() to user space
  NFS: Do not display the setting of the "intr" mount option
  NFS: add support for splice writes
  nfs41: Backchannel: CB_SEQUENCE validation
  ...

11 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Mon, 22 Jun 2009 19:51:28 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (22 commits)
  [S390] Update default configuration.
  [S390] kprobes: defer setting of ctlblk state
  [S390] Enable tick based perf_counter on s390.
  [S390] dasd: fix refcounting in dasd_change_state
  [S390] lockless idle time accounting
  [S390] driver_data access
  [S390] pm: fix build error for !SMP
  [S390] dasd_pm: fix stop flag handling
  [S390] ap/zcrypt: Suspend/Resume ap bus and zcrypt
  [S390] qdio: Sanitize do_QDIO sanity checks
  [S390] qdio: leave inbound SBALs primed
  [S390] qdio: merge AI tasklet into interrupt handler
  [S390] qdio: extract all primed SBALs at once
  [S390] qdio: fix check for running under z/VM
  [S390] qdio: move adapter interrupt tasklet code
  [S390] Use del_timer instead of del_timer_sync
  [S390] s390: remove DEBUG_MALLOC
  [S390] vt220 console: convert from bootmem to slab
  [S390] sclp console: convert from bootmem to slab
  [S390] 3270 console: convert from bootmem to slab
  ...

11 years agoMerge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux
Linus Torvalds [Mon, 22 Jun 2009 19:44:14 +0000]
Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux

* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c: Fix stuck transaction on cpm-i2c driver
  i2c-omap: Fix build breaking typo cpu_is_omap_2430

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6
Linus Torvalds [Mon, 22 Jun 2009 19:38:31 +0000]
Merge git://git./linux/kernel/git/czankel/xtensa-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
  xtensa: enable m41t80 driver in s6105_defconfig
  xtensa: add m41t62 rtc to s6105 platform
  xtensa: enable s6gmac in s6105_defconfig
  xtensa: s6105 specific configuration for s6gmac
  s6gmac: xtensa s6000 on-chip ethernet driver
  xtensa: support s6000 gpio irqs and alternate function selection
  xtensa: s6000 dma engine support
  xtensa: allow variant to initialize own irq chips
  xtensa: cache inquiry and unaligned cache handling functions

11 years agoMerge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Mon, 22 Jun 2009 18:59:51 +0000]
Merge branch 'linux-next' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits)
  PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write
  PCI: Fix the NIU MSI-X problem in a better way
  PCI ASPM: remove get_root_port_link
  PCI ASPM: cleanup pcie_aspm_sanity_check
  PCI ASPM: remove has_switch field
  PCI ASPM: cleanup calc_Lx_latency
  PCI ASPM: cleanup pcie_aspm_get_cap_device
  PCI ASPM: cleanup clkpm checks
  PCI ASPM: cleanup __pcie_aspm_check_state_one
  PCI ASPM: cleanup initialization
  PCI ASPM: cleanup change input argument of aspm functions
  PCI ASPM: cleanup misc in struct pcie_link_state
  PCI ASPM: cleanup clkpm state in struct pcie_link_state
  PCI ASPM: cleanup latency field in struct pcie_link_state
  PCI ASPM: cleanup aspm state field in struct pcie_link_state
  PCI ASPM: fix typo in struct pcie_link_state
  PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS
  PCI: remove redundant __msi_set_enable()
  PCI PM: consistently use type bool for wake enable variable
  x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
Linus Torvalds [Mon, 22 Jun 2009 18:57:09 +0000]
Merge git://git./linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (43 commits)
  via-velocity: Fix velocity driver unmapping incorrect size.
  mlx4_en: Remove redundant refill code on RX
  mlx4_en: Removed redundant check on lso header size
  mlx4_en: Cancel port_up check in transmit function
  mlx4_en: using stop/start_all_queues
  mlx4_en: Removed redundant skb->len check
  mlx4_en: Counting all the dropped packets on the TX side
  usbnet cdc_subset: fix issues talking to PXA gadgets
  Net: qla3xxx, remove sleeping in atomic
  ipv4: fix NULL pointer + success return in route lookup path
  isdn: clean up documentation index
  cfg80211: validate station settings
  cfg80211: allow setting station parameters in mesh
  cfg80211: allow adding/deleting stations on mesh
  ath5k: fix beacon_int handling
  MAINTAINERS: Fix Atheros pattern paths
  ath9k: restore PS mode, before we put the chip into FULL SLEEP state.
  ath9k: wait for beacon frame along with CAB
  acer-wmi: fix rfkill conversion
  ath5k: avoid PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling
  ...

11 years agoMaking fs/minix/minix.h double including safe
Hitoshi Mitake [Mon, 22 Jun 2009 02:11:20 +0000]
Making fs/minix/minix.h double including safe

I happened to find that fs/minix/minix.h doesn't guard double include.

Yes, I know this never cause something destructive because this is
self-evidence that no source file includes minix.h twice, but I think
fixing this is better than disregarding it.

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomsm: fixups to match current code
Alan Cox [Mon, 22 Jun 2009 17:43:18 +0000]
msm: fixups to match current code

The tty layer is now a bit more fussy about reporting the right baud rate
back. Make the msm driver match the current state of affairs.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomsm_serial: serial driver for MSM7K onboard serial peripheral.
Robert Love [Mon, 22 Jun 2009 17:43:11 +0000]
msm_serial: serial driver for MSM7K onboard serial peripheral.

Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotimbuart: Fix for tx_empty
Richard Röjfors [Mon, 22 Jun 2009 17:43:03 +0000]
timbuart: Fix for tx_empty

Hardware updated to support TX FIFO empty.

Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotty: n_hdlc add buffer flushing
Paul Fulghum [Mon, 22 Jun 2009 17:42:56 +0000]
tty: n_hdlc add buffer flushing

Add flush_buffer tty callback to flush rx buffers.
Add TCFLSH ioctl processing to flush tx buffers.
Increase default tx buffers from 1 to 3.
Remove unneeded flush_buffer call in open callback.
Remove vendor specific CVS version string.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoserial: samsung.c: mark s3c24xx_serial_remove as __devexit
Peter Korsgaard [Mon, 22 Jun 2009 17:42:49 +0000]
serial: samsung.c: mark s3c24xx_serial_remove as __devexit

Mark the remove function as __devexit so it gets eliminated in
CONFIG_HOTPLUG=n builds.  Saves ~100 bytes.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoserial@ add OMAP wakeup-enable register
Kevin Hilman [Mon, 22 Jun 2009 17:42:42 +0000]
serial@ add OMAP wakeup-enable register

Add the wakeup enable register to the list of OMAP-specific UART
registers.  This is to support forthcoming OMAP PM enhancements which
use the wakeup feature of the OMAP's 8250-based UART.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotty: fix some bogns in the serqt_usb2 driver
Alan Cox [Mon, 22 Jun 2009 17:42:36 +0000]
tty: fix some bogns in the serqt_usb2 driver

Remove the replicated urban legends from the comments and fix a couple of
other silly calls

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoppp: Fix throttling bugs
Alan Cox [Mon, 22 Jun 2009 17:42:29 +0000]
ppp: Fix throttling bugs

The ppp layer goes around calling the unthrottle method from non sleeping
paths. This isn't safe because the unthrottle methods in the tty layer need
to be able to sleep (consider a USB dongle).

Until now this didn't show up because the ppp layer never actually throttled
a port so the unthrottle was always a no-op. Currently it's a mutex taking
path so warnings are spewed if the unthrottle occurs via certain paths.

Fix this by removing the unneccessary unthrottle calls.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agovt_ioctl: fix lock imbalance
Jiri Slaby [Mon, 22 Jun 2009 17:42:18 +0000]
vt_ioctl: fix lock imbalance

Don't return from switch/case directly in vt_ioctl. Set ret and break
instead so that we unlock BKL.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agopcmcia/cm4000: fix lock imbalance
Jiri Slaby [Mon, 22 Jun 2009 17:42:10 +0000]
pcmcia/cm4000: fix lock imbalance

Don't return from switch/case, break instead, so that we unlock BKL.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agon_r3964: fix lock imbalance
Jiri Slaby [Mon, 22 Jun 2009 17:42:03 +0000]
n_r3964: fix lock imbalance

There is omitted BKunL in r3964_read.

Centralize the paths to one point with one unlock.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoserial: fix off by one errors
Roel Kluin [Mon, 22 Jun 2009 17:41:56 +0000]
serial: fix off by one errors

In zs_console_putchar() occurs:

if (zs_transmit_drain(zport, irq))
write_zsdata(zport, ch);

However if in zs_transmit_drain() no empty Tx Buffer occurs, limit reaches
-1 => true, and the write still occurs.

This patch changes postfix to prefix decrements in this and similar
functions to prevent similar mistakes in the future.  This decreases the
iterations with one but the chosen loop count was arbitrary anyway.

In sunhv limit reaches -1, not 0, so the test is off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoserial: bfin_5xx: fix building as module when early printk is enabled
Mike Frysinger [Mon, 22 Jun 2009 17:41:47 +0000]
serial: bfin_5xx: fix building as module when early printk is enabled

Since early printk only makes sense/works when the serial driver is built
into the kernel, disable the option for this driver when it is going to be
built as a module.  Otherwise we get build failures due to the ifdef
handling.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoserial: bfin_5xx: add missing spin_lock init
Mike Frysinger [Mon, 22 Jun 2009 17:37:24 +0000]
serial: bfin_5xx: add missing spin_lock init

The Blackfin serial driver never initialized the spin_lock that is part of
the serial core structure, but we never noticed because spin_lock's are
rarely enabled on UP systems.  Yeah lockdep and friends.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agobfin_jtag_comm: clean up printk usage
Mike Frysinger [Mon, 22 Jun 2009 17:31:10 +0000]
bfin_jtag_comm: clean up printk usage

The original patch garned some feedback and a v2 was posted, but that
version seems to have been missed when merging the driver.

At any rate, this cleans up the printk usage as suggested by Jiri Slaby.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoparport_pc: set properly the dma_mask for parport_pc device
FUJITA Tomonori [Mon, 22 Jun 2009 15:54:27 +0000]
parport_pc: set properly the dma_mask for parport_pc device

parport_pc_probe_port() creates the own 'parport_pc' device if the
device argument is NULL. Then parport_pc_probe_port() doesn't
initialize the dma_mask and coherent_dma_mask of the device and calls
dma_alloc_coherent with it. dma_alloc_coherent fails because
dma_alloc_coherent() doesn't accept the uninitialized dma_mask:

http://lkml.org/lkml/2009/6/16/150

Long ago, X86_32 and X86_64 had the own dma_alloc_coherent
implementations; X86_32 accepted a device having dma_mask that is not
initialized however X86_64 didn't. When we merged them, we chose to
prohibit a device having dma_mask that is not initialized. I think
that it's good to require drivers to set up dma_mask (and
coherent_dma_mask) properly if the drivers want DMA.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reported-by: Malcom Blaney <malcolm.blaney@maptek.com.au>
Tested-by: Malcom Blaney <malcolm.blaney@maptek.com.au>
Cc: stable@kernel.org
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoparport_pc: after superio probing restore original register values
Jens Rottmann [Mon, 22 Jun 2009 15:51:49 +0000]
parport_pc: after superio probing restore original register values

CONFIG_PARPORT_PC_SUPERIO probes for various superio chips by writing
byte sequences to a set of different potential I/O ranges.  But the
probed ranges are not exclusive to parallel ports.  Some of our boards
just happen to have a watchdog in one of them.  Took us almost a week
to figure out why some distros reboot without warning after running
flawlessly for 3 hours.  For exactly 170 = 0xAA minutes, that is ...

Fixed by restoring original values after probing.  Also fixed too small
request_region() in detect_and_report_it87().

Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: <stable@kernel.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoRevert "char: moxa, prevent opening unavailable ports"
Linus Torvalds [Mon, 22 Jun 2009 18:24:43 +0000]
Revert "char: moxa, prevent opening unavailable ports"

This reverts commit a90b037583d5f1ae3e54e9c687c79df82d1d34a4, which
already got fixed as commit f0e8527726b9e56649b9eafde3bc0fbc4dd2dd47:
the same patch (trivial differences) got applied twice.

Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago[S390] Update default configuration.
Martin Schwidefsky [Mon, 22 Jun 2009 10:08:24 +0000]
[S390] Update default configuration.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] kprobes: defer setting of ctlblk state
Heiko Carstens [Mon, 22 Jun 2009 10:08:23 +0000]
[S390] kprobes: defer setting of ctlblk state

get_krobe_ctlblk returns a per cpu kprobe control block which holds
the state of the current cpu wrt to kprobe.
When inserting/removing a kprobe the state of the cpu which replaces
the code is changed to KPROBE_SWAP_INST. This however is done when
preemption is still enabled. So the state of the current cpu doesn't
necessarily reflect the real state.
To fix this move the code that changes the state to non-preemptible
context.

Reported-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] Enable tick based perf_counter on s390.
Martin Schwidefsky [Mon, 22 Jun 2009 10:08:22 +0000]
[S390] Enable tick based perf_counter on s390.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] dasd: fix refcounting in dasd_change_state
Sebastian Ott [Mon, 22 Jun 2009 10:08:21 +0000]
[S390] dasd: fix refcounting in dasd_change_state

To set a dasd online dasd_change_state is called twice. The first
cycle will schedule initial analysis of the device, set the rc to
-EAGAIN and will not touch the device state any more.
The initial analysis will in turn call dasd_change_state to increase
the state to the final DASD_STATE_ONLINE.

If the dasd_change_state on the second thread outruns the other one
both finish with the state set to DASD_STATE_ONLINE and the device
refcount will be decreased by 2.

Fix this by leaving dasd_change_state on rc == -EAGAIN so that the
refcount will always be decreased by 1.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] lockless idle time accounting
Martin Schwidefsky [Mon, 22 Jun 2009 10:08:20 +0000]
[S390] lockless idle time accounting

Replace the spinlock used in the idle time accounting with a sequence
counter mechanism analog to seqlock.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] driver_data access
Martin Schwidefsky [Mon, 22 Jun 2009 10:08:19 +0000]
[S390] driver_data access

Replace the remaining direct accesses to the driver_data pointer
with calls to the dev_get_drvdata() and dev_set_drvdata() functions.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] pm: fix build error for !SMP
Heiko Carstens [Mon, 22 Jun 2009 10:08:18 +0000]
[S390] pm: fix build error for !SMP

Fix build error for !SMP:

arch/s390/power/built-in.o: In function `swsusp_arch_resume':
(.text+0x1b4): undefined reference to `smp_get_phys_cpu_id'
arch/s390/power/built-in.o: In function `swsusp_arch_resume':
(.text+0x288): undefined reference to `smp_switch_boot_cpu_in_resume'
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] dasd_pm: fix stop flag handling
Stefan Haberland [Mon, 22 Jun 2009 10:08:17 +0000]
[S390] dasd_pm: fix stop flag handling

The stop flags are handled in the generic restore function so the
stop flag is removed also for FBA and DIAG devices.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] ap/zcrypt: Suspend/Resume ap bus and zcrypt
Felix Beck [Mon, 22 Jun 2009 10:08:16 +0000]
[S390] ap/zcrypt: Suspend/Resume ap bus and zcrypt

Add Suspend/Resume support to ap bus and zcrypt. All enhancements are
done in the ap bus. No changes in the crypto card specific part are
necessary.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] qdio: Sanitize do_QDIO sanity checks
Jan Glauber [Mon, 22 Jun 2009 10:08:15 +0000]
[S390] qdio: Sanitize do_QDIO sanity checks

Remove unneeded sanity checks from do_QDIO since this is the hot path.
Change the type of bufnr and count to unsigned int so the check for the
maximum value works.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] qdio: leave inbound SBALs primed
Jan Glauber [Mon, 22 Jun 2009 10:08:14 +0000]
[S390] qdio: leave inbound SBALs primed

It is not required to change the state of primed SBALs. Leaving them
primed saves a SQBS instruction under z/VM.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] qdio: merge AI tasklet into interrupt handler
Jan Glauber [Mon, 22 Jun 2009 10:08:13 +0000]
[S390] qdio: merge AI tasklet into interrupt handler

Since the adapter interrupt tasklet only schedules the queue tasklets
and contains no code that requires serialization in can be merged
with the adapter interrupt handler. That possibly safes some CPU
cycles.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] qdio: extract all primed SBALs at once
Jan Glauber [Mon, 22 Jun 2009 10:08:12 +0000]
[S390] qdio: extract all primed SBALs at once

For devices without QIOASSIST primed SBALS were extracted in a loop.
Remove the loop since get_buf_states can already return more than
one primed SBAL.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] qdio: fix check for running under z/VM
Jan Glauber [Mon, 22 Jun 2009 10:08:11 +0000]
[S390] qdio: fix check for running under z/VM

The check whether qdio runs under z/VM was incorrect since SIGA-Sync is not
set if the device runs with QIOASSIST. Use MACHINE_IS_VM instead to prevent
polling under z/VM.

Merge qdio_inbound_q_done and tiqdio_is_inbound_q_done.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] qdio: move adapter interrupt tasklet code
Jan Glauber [Mon, 22 Jun 2009 10:08:10 +0000]
[S390] qdio: move adapter interrupt tasklet code

Move the adapter interrupt tasklet function to the qdio main code
since all the functions used by the tasklet are located there.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] Use del_timer instead of del_timer_sync
Michael Holzheu [Mon, 22 Jun 2009 10:08:09 +0000]
[S390] Use del_timer instead of del_timer_sync

When syncing the sclp console queue, we call del_timer_sync() while holding
the "sclp_con_lock" spinlock. This lock is also taken in the timer function
"sclp_console_timeout". Therefore the sync version of del_timer() cannot be
used here. Because the synchronous deletion of the timer is only needed
in the suspend callback and in that case only one CPU is remaining and
therefore it is not possible that the timer function is running in parallel,
we can safely use del_timer() instead of del_timer_sync().

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] s390: remove DEBUG_MALLOC
Pekka Enberg [Mon, 22 Jun 2009 10:08:08 +0000]
[S390] s390: remove DEBUG_MALLOC

The kernel now has kmemleak and kmemtrace so there's no reason to keep
this ugly s390 hack around. I am not sure how it's supposed to work on
SMP anyway as it uses a global variable to temporarily store the return
value of all kmalloc() calls:

  void *b;

  #define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b)

Cc: <linux-s390@vger.kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] vt220 console: convert from bootmem to slab
Heiko Carstens [Mon, 22 Jun 2009 10:08:07 +0000]
[S390] vt220 console: convert from bootmem to slab

The slab allocator is earlier available so convert the
bootmem allocations to slab/gfp allocations.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] sclp console: convert from bootmem to slab
Heiko Carstens [Mon, 22 Jun 2009 10:08:06 +0000]
[S390] sclp console: convert from bootmem to slab

The slab allocator is earlier available so convert the
bootmem allocations to slab/gfp allocations.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] 3270 console: convert from bootmem to slab
Heiko Carstens [Mon, 22 Jun 2009 10:08:05 +0000]
[S390] 3270 console: convert from bootmem to slab

The slab allocator is earlier available so convert the
bootmem allocations to slab/gfp allocations.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] 3215 console: convert from bootmem to slab
Heiko Carstens [Mon, 22 Jun 2009 10:08:04 +0000]
[S390] 3215 console: convert from bootmem to slab

The slab allocator is earlier available so convert the
bootmem allocations to slab/gfp allocations.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] time: convert from bootmem to slab
Heiko Carstens [Mon, 22 Jun 2009 10:08:03 +0000]
[S390] time: convert from bootmem to slab

The slab allocator is earlier available so convert the
bootmem allocations to slab/gfp allocations.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years agoxtensa: enable m41t80 driver in s6105_defconfig
Daniel Glockner [Wed, 10 Jun 2009 19:58:51 +0000]
xtensa: enable m41t80 driver in s6105_defconfig

Signed-off-by: Daniel Glockner <dg@emlix.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

11 years agoxtensa: add m41t62 rtc to s6105 platform
Daniel Glockner [Wed, 10 Jun 2009 19:58:50 +0000]
xtensa: add m41t62 rtc to s6105 platform

Signed-off-by: Daniel Glockner <dg@emlix.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

11 years agoxtensa: enable s6gmac in s6105_defconfig
Daniel Glockner [Wed, 10 Jun 2009 19:58:49 +0000]
xtensa: enable s6gmac in s6105_defconfig

Signed-off-by: Daniel Glockner <dg@emlix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Weiner <jw@emlix.com>
Cc: Oskar Schirmer <os@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

11 years agoxtensa: s6105 specific configuration for s6gmac
Oskar Schirmer [Wed, 10 Jun 2009 19:58:48 +0000]
xtensa: s6105 specific configuration for s6gmac

Platform-specific configuration for the s6gmac driver, including the
PHY interrupt line.

Signed-off-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Weiner <jw@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

11 years agos6gmac: xtensa s6000 on-chip ethernet driver
Oskar Schirmer [Wed, 10 Jun 2009 19:58:48 +0000]
s6gmac: xtensa s6000 on-chip ethernet driver

The s6000 on-chip MAC supports 10/100/1000Mbit and is connected to an
external PHY via MII or RGMII interface.

[jw@emlix.com: don't use device->bus_id directly]
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Daniel Glockner <dg@emlix.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Zankel <chris@zankel.net>

11 years agoxtensa: support s6000 gpio irqs and alternate function selection
Daniel Glöckner [Tue, 5 May 2009 15:03:22 +0000]
xtensa: support s6000 gpio irqs and alternate function selection

Implement an irq chip to handle interrupts via gpio.  The GPIO chip
initialization function now takes a bitmask denoting pins that should
be configured for their alternate function.

changes compared to v1:
- fixed bug on edge interrupt configuration
- accommodated to function name change
- moved definition of VARIANT_NR_IRQS to this patch
- renamed __XTENSA_S6000_IRQ_H to _XTENSA_S6000_IRQ_H as requested

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

11 years agoxtensa: s6000 dma engine support
Oskar Schirmer [Wed, 10 Jun 2009 19:58:45 +0000]
xtensa: s6000 dma engine support

There are four slightly different dma engines on the s6000 family.
One for memory-memory transfers, the other three for memory-device.

This patch implements a platform-specific kernel-API to control these
engines.  It is needed for the network, video, audio peripherals on
s6000.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Fabian Godehardt <fg@emlix.com>
Cc: Daniel Glockner <dg@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Zankel <chris@zankel.net>

11 years agoxtensa: allow variant to initialize own irq chips
Daniel Glöckner [Tue, 5 May 2009 15:03:21 +0000]
xtensa: allow variant to initialize own irq chips

There was already a PLATFORM_NR_IRQS define, which is now accompanied
by a VARIANT_NR_IRQS. To be able to initialize these interrupts,
init_IRQ now calls a variant specific hook.

Changes compared to v1:
- adapted to new CONFIG_VARIANT_IRQ_EXT
- removed definition and call of platform_init_IRQ as there already
  is a platform_init_irq defined in asm/platform.h with a weak default
  in kernel/platform.c
- renamed variant_init_IRQ to variant_init_irq

Note that I could not find the call site of platform_init_irq although
it is stated in platform.h that it is called from init_IRQ.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

11 years agoxtensa: cache inquiry and unaligned cache handling functions
Oskar Schirmer [Wed, 10 Jun 2009 19:58:45 +0000]
xtensa: cache inquiry and unaligned cache handling functions

The existing xtensa cache handling functions work on page-aligned
memory regions.

These functions are needed for the s6000 dma engine which can work on
a byte-granularity.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: Johannes Weiner <jw@emlix.com>
Cc: Daniel Glockner <dg@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Zankel <chris@zankel.net>

11 years agovia-velocity: Fix velocity driver unmapping incorrect size.
Dave Jones [Mon, 22 Jun 2009 05:42:30 +0000]
via-velocity: Fix velocity driver unmapping incorrect size.

When a packet is greater than ETH_ZLEN, we end up assigning the
boolean result of a comparison to the size we unmap.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomlx4_en: Remove redundant refill code on RX
Yevgeny Petrilin [Sat, 20 Jun 2009 22:16:10 +0000]
mlx4_en: Remove redundant refill code on RX

Our RX rings are always full, there is no need to check whether
we need to fill them or not. If we fail to allocate a new socket
buffer, the incoming packet is dropped an the ring remains full.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomlx4_en: Removed redundant check on lso header size
Yevgeny Petrilin [Sat, 20 Jun 2009 22:16:02 +0000]
mlx4_en: Removed redundant check on lso header size

This check that verifies that the LSO header along with control
segment and first data segment do not cross 128 bytes is no longer
required.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomlx4_en: Cancel port_up check in transmit function
Yevgeny Petrilin [Sat, 20 Jun 2009 22:15:52 +0000]
mlx4_en: Cancel port_up check in transmit function

When closing the port, we stop all transmit queues under the transmit
lock. It ensures that we will not attempt to transmit new packets after
the physical port was closed.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomlx4_en: using stop/start_all_queues
Yevgeny Petrilin [Sat, 20 Jun 2009 22:15:46 +0000]
mlx4_en: using stop/start_all_queues

After we moved to be a multi queue device, need to stop/start
all of our transmit queues.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomlx4_en: Removed redundant skb->len check
Yevgeny Petrilin [Sat, 20 Jun 2009 22:15:39 +0000]
mlx4_en: Removed redundant skb->len check

We don't need this check in the transmit function

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomlx4_en: Counting all the dropped packets on the TX side
Yevgeny Petrilin [Sat, 20 Jun 2009 22:15:31 +0000]
mlx4_en: Counting all the dropped packets on the TX side

Reporting the counter's value through 'ethtool -S'

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoi2c: Fix stuck transaction on cpm-i2c driver
Michael Trimarchi [Fri, 19 Jun 2009 12:50:02 +0000]
i2c: Fix stuck transaction on cpm-i2c driver

When a process tries to read/write a disconnected i2c device, it receives a signal (e.g. ctrl-c) and the kernel gets stuck.

BUG: soft lockup - CPU#0 stuck for 61s! [I2CEEpromTest:392]
NIP: c01628f8 LR: c01628f0 CTR: c00177cc
REGS: c39abd70 TRAP: 0901   Not tainted  (2.6.25.7-alcore)
MSR: 00009032 <EE,ME,IR,DR>  CR: 42042048  XER: 20000000
TASK = c3889bd0[392] 'I2CEEpromTest' THREAD: c39aa000
GPR00: 00009000 c39abe20 c3889bd0 c39075c8 c39abe28 00000001 00000000 00000001
GPR08: c3889bd0 c39075c8 00009032 c39abe34 00002437
NIP [c01628f8] cpm_i2c_xfer+0x5fc/0x6d0
LR [c01628f0] cpm_i2c_xfer+0x5f4/0x6d0
Call Trace:
[c39abe20] [c0162924] cpm_i2c_xfer+0x628/0x6d0 (unreliable)
[c39abe90] [c015f6a0] i2c_transfer+0x88/0xb4
[c39abeb0] [c0160164] i2c_master_recv+0x48/0x6c
[c39abed0] [c01618dc] i2cdev_read+0x50/0xe4
[c39abef0] [c0068b24] vfs_read+0xc4/0x108
[c39abf10] [c0068f4c] sys_read+0x4c/0x90
[c39abf40] [c000d348] ret_from_syscall+0x0/0x38
Instruction dump:
3bc00064 92610010 3bf201c8 92810014 3b61

This happen because though the wait_event_interruptible_timeout takes the
signals into account, the driver does not handle them.
We propose to change the wait_event_interruptible_timeout with
wait_event_timeout, leaving the signals to be handled in other points
on the upper layers.

Signed-off-by: Bruno Morelli <bruno@evidence.eu.com>
Signed-off-by: Michael Trimarchi <michael@evidence.eu.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
[ben-linux@fluff.org: fix title for patch]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

11 years agoi2c-omap: Fix build breaking typo cpu_is_omap_2430
Tony Lindgren [Wed, 17 Jun 2009 10:20:21 +0000]
i2c-omap: Fix build breaking typo cpu_is_omap_2430

Hi Ben,

Can you please queue this fix?

Thanks,

Tony

>From ffe2b2cdf6283770b70a197e3748c6b40a1006be Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 17 Jun 2009 13:14:23 +0300
Subject: [PATCH] i2c-omap: Fix build breaking typo in cpu_is_omap_2430

Commit 84bf2c86 introduced a typo, it should be cpu_is_omap2430
instead. The typo was probably caused by a mismerge.

Without this patch all omaps fail to build with:
error: implicit declaration of function 'cpu_is_omap_2430'

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Sun, 21 Jun 2009 20:14:22 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: remove needless double parenthesis
  sdhci: Specific quirk vor VIA SDHCI controller in VX855ES
  s3cmci: fix dma configuration call
  mmc: Add new via-sdmmc host controller driver
  sdhci: Add support for hosts that are only capable of 1-bit transfers
  MAINTAINERS: add myself as atmel-mci maintainer (sd/mmc interface)
  sdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirk
  sdhci: Add better ADMA error reporting
  sdhci-s3c: Samsung S3C based SDHCI controller glue

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sun, 21 Jun 2009 20:14:07 +0000]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aes-ni - Remove CRYPTO_TFM_REQ_MAY_SLEEP from fpu template
  crypto: aes-ni - Do not sleep when using the FPU
  crypto: aes-ni - Fix cbc mode IV saving
  crypto: padlock-aes - work around Nano CPU errata in CBC mode
  crypto: padlock-aes - work around Nano CPU errata in ECB mode

11 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 21 Jun 2009 20:13:53 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: Select frame pointers on x86
  dma-debug: be more careful when building reference entries
  dma-debug: check for sg_call_ents in best-fit algorithm too

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 21 Jun 2009 20:13:08 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add model=6530g option
  ALSA: hda - Acer Inspire 6530G model for Realtek ALC888
  ALSA: snd_usb_caiaq: fix legacy input streaming
  ASoC: Kill BUS_ID_SIZE
  ALSA: HDA - Correct trivial typos in comments.
  ALSA: HDA - Name-fixes in code (tagra/targa)
  ALSA: HDA - Add pci-quirk for MSI MS-7350 motherboard.
  ALSA: hda - Fix memory leak at codec creation

11 years agoMove FAULT_FLAG_xyz into handle_mm_fault() callers
Linus Torvalds [Fri, 10 Apr 2009 16:01:23 +0000]
Move FAULT_FLAG_xyz into handle_mm_fault() callers

This allows the callers to now pass down the full set of FAULT_FLAG_xyz
flags to handle_mm_fault().  All callers have been (mechanically)
converted to the new calling convention, there's almost certainly room
for architectures to clean up their code and then add FAULT_FLAG_RETRY
when that support is added.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoRemove internal use of 'write_access' in mm/memory.c
Linus Torvalds [Fri, 10 Apr 2009 15:43:11 +0000]
Remove internal use of 'write_access' in mm/memory.c

The fault handling routines really want more fine-grained flags than a
single "was it a write fault" boolean - the callers will want to set
flags like "you can return a retry error" etc.

And that's actually how the VM works internally, but right now the
top-level fault handling functions in mm/memory.c all pass just the
'write_access' boolean around.

This switches them over to pass around the FAULT_FLAG_xyzzy 'flags'
variable instead.  The 'write_access' calling convention still exists
for the exported 'handle_mm_fault()' function, but that is next.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipc: unbreak 32-bit shmctl/semctl/msgctl
Johannes Weiner [Sat, 20 Jun 2009 00:23:29 +0000]
ipc: unbreak 32-bit shmctl/semctl/msgctl

31a985f "ipc: use __ARCH_WANT_IPC_PARSE_VERSION in ipc/util.h" would
choose the implementation of ipc_parse_version() based on a symbol
defined in <asm/unistd.h>.

But it failed to also include this header and thus broke
IPC_64-passing 32-bit userspace because the flag wasn't masked out
properly anymore and the command not understood.

Include <linux/unistd.h> to give the architecture a chance to ask for
the no-no-op ipc_parse_version().

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agosdhci: remove needless double parenthesis
Pierre Ossman [Sun, 21 Jun 2009 18:59:33 +0000]
sdhci: remove needless double parenthesis

Signed-off-by: Pierre Ossman <pierre@ossman.eu>

11 years agosdhci: Specific quirk vor VIA SDHCI controller in VX855ES
Harald Welte [Thu, 18 Jun 2009 14:53:38 +0000]
sdhci: Specific quirk vor VIA SDHCI controller in VX855ES

The SDHCI controller found in the VX855ES requires 10ms
delay between applying power and applying clock.

This issue has been discovered and documented by the OLPC XO1.5 team.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

11 years agos3cmci: fix dma configuration call
Ben Dooks [Mon, 8 Jun 2009 22:33:56 +0000]
s3cmci: fix dma configuration call

This was missed in the DMA changes during the s3c24xx
updates in commit 8970ef47d56fd3db28ee798b9d400caf08abd924.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

11 years agommc: Add new via-sdmmc host controller driver
Harald Welte [Wed, 17 Jun 2009 18:22:39 +0000]
mmc: Add new via-sdmmc host controller driver

This adds the via-sdmmc driver for the SD/MMC-controller of VIA,
which is found in a number of recent integrated VIA chipset
products.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

11 years agosdhci: Add support for hosts that are only capable of 1-bit transfers
Anton Vorontsov [Wed, 17 Jun 2009 20:14:08 +0000]
sdhci: Add support for hosts that are only capable of 1-bit transfers

Some hosts (hardware configurations, or particular SD/MMC slots) may
not support 4-bit bus. For example, on MPC8569E-MDS boards we can
switch between serial (1-bit only) and nibble (4-bit) modes, thought
we have to disable more peripherals to work in 4-bit mode.

Along with some small core changes, this patch modifies sdhci-of
driver, so that now it looks for "sdhci,1-bit-only" property in the
device-tree, and if specified we enable a proper quirk.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

11 years agoMAINTAINERS: add myself as atmel-mci maintainer (sd/mmc interface)
Nicolas Ferre [Tue, 16 Jun 2009 11:05:50 +0000]
MAINTAINERS: add myself as atmel-mci maintainer (sd/mmc interface)

Add MAINTAINERS entry for atmel-mci driver.
This driver was maintained by its author: Haavard Skinnemoen. I take the
maintainance of it.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

11 years agosdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirk
Ben Dooks [Sun, 14 Jun 2009 11:40:53 +0000]
sdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirk

Add quirk to show the controller cannot do multi-block IO.

This is mainly for the Samsung SDHCI controller that currently
cannot manage to do multi-block PIO without timing out.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

11 years agosdhci: Add better ADMA error reporting
Ben Dooks [Sun, 14 Jun 2009 12:52:38 +0000]
sdhci: Add better ADMA error reporting

Update the ADMA error reporting to not only show the
overall controller state but also to print the ADMA
descriptor list.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

11 years agosdhci-s3c: Samsung S3C based SDHCI controller glue
Ben Dooks [Sun, 14 Jun 2009 12:52:37 +0000]
sdhci-s3c: Samsung S3C based SDHCI controller glue

Add support for the 'HSMMC' block(s) in the Samsung SoC
line. These are compatible with the SDHCI driver so add
the necessary setup and driver binding for the platform
devices.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

11 years agoMerge branch 'topic/hda' into for-linus
Takashi Iwai [Sun, 21 Jun 2009 08:59:12 +0000]
Merge branch 'topic/hda' into for-linus

* topic/hda:
  ALSA: hda - Add model=6530g option
  ALSA: hda - Acer Inspire 6530G model for Realtek ALC888
  ALSA: HDA - Correct trivial typos in comments.
  ALSA: HDA - Name-fixes in code (tagra/targa)
  ALSA: HDA - Add pci-quirk for MSI MS-7350 motherboard.
  ALSA: hda - Fix memory leak at codec creation

11 years agoMerge branch 'topic/caiaq' into for-linus
Takashi Iwai [Sun, 21 Jun 2009 08:59:10 +0000]
Merge branch 'topic/caiaq' into for-linus

* topic/caiaq:
  ALSA: snd_usb_caiaq: fix legacy input streaming

11 years agoMerge branch 'topic/asoc' into for-linus
Takashi Iwai [Sun, 21 Jun 2009 08:59:04 +0000]
Merge branch 'topic/asoc' into for-linus

* topic/asoc:
  ASoC: Kill BUS_ID_SIZE

11 years agoALSA: hda - Add model=6530g option
Takashi Iwai [Sun, 21 Jun 2009 08:56:44 +0000]
ALSA: hda - Add model=6530g option

Add the new model string corresponding to the previous Acer Aspire
6530G support.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

11 years agoALSA: hda - Acer Inspire 6530G model for Realtek ALC888
Tony Vroon [Sat, 20 Jun 2009 23:40:10 +0000]
ALSA: hda - Acer Inspire 6530G model for Realtek ALC888

The selected 4930G model seemed to keep the subwoofer 'tuba'
function from operating correctly. Removing the existing PCI
ID match made this work again, but it was mapped to 'Side'
instead of to LFE as one would expect.
This attempts to enable all functionality and keep the amount
of available mixer sliders low. Any slider that had no audible
effect on the output audio has been removed, and as such EAPD
is not currently enabled.

Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

11 years agolockdep: Select frame pointers on x86
Peter Zijlstra [Fri, 12 Jun 2009 08:04:01 +0000]
lockdep: Select frame pointers on x86

x86 stack traces are a piece of crap without frame pointers, and its not
like the 'performance gain' of not having stack pointers matters when you
selected lockdep.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <new-submission>
Cc: <stable@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agomm: page_alloc: clear PG_locked before checking flags on free
Johannes Weiner [Fri, 19 Jun 2009 17:30:56 +0000]
mm: page_alloc: clear PG_locked before checking flags on free

da456f1 "page allocator: do not disable interrupts in free_page_mlock()" moved
the PG_mlocked clearing after the flag sanity checking which makes mlocked
pages always trigger 'bad page'.  Fix this by clearing the bit up front.

Reported--and-debugged-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agox86, 64-bit: Clean up user address masking
Linus Torvalds [Sat, 20 Jun 2009 22:40:00 +0000]
x86, 64-bit: Clean up user address masking

The discussion about using "access_ok()" in get_user_pages_fast() (see
commit 7f8189068726492950bf1a2dcfd9b51314560abf: "x86: don't use
'access_ok()' as a range check in get_user_pages_fast()" for details and
end result), made us notice that x86-64 was really being very sloppy
about virtual address checking.

So be way more careful and straightforward about masking x86-64 virtual
addresses:

 - All the VIRTUAL_MASK* variants now cover half of the address
   space, it's not like we can use the full mask on a signed
   integer, and the larger mask just invites mistakes when
   applying it to either half of the 48-bit address space.

 - /proc/kcore's kc_offset_to_vaddr() becomes a lot more
   obvious when it transforms a file offset into a
   (kernel-half) virtual address.

 - Unify/simplify the 32-bit and 64-bit USER_DS definition to
   be based on TASK_SIZE_MAX.

This cleanup and more careful/obvious user virtual address checking also
uncovered a buglet in the x86-64 implementation of strnlen_user(): it
would do an "access_ok()" check on the whole potential area, even if the
string itself was much shorter, and thus return an error even for valid
strings. Our sloppy checking had hidden this.

So this fixes 'strnlen_user()' to do this properly, the same way we
already handled user strings in 'strncpy_from_user()'.  Namely by just
checking the first byte, and then relying on fault handling for the
rest.  That always works, since we impose a guard page that cannot be
mapped at the end of the user space address space (and even if we
didn't, we'd have the address space hole).

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agonfs41: sunrpc: xprt_alloc_bc_request() should not use spin_lock_bh()
Ricardo Labiaga [Fri, 19 Jun 2009 02:01:24 +0000]
nfs41: sunrpc: xprt_alloc_bc_request() should not use spin_lock_bh()

xprt_alloc_bc_request() is always called in soft interrupt context.
Grab the spin_lock instead of the bottom half spin_lock.  Softirqs
do not preempt other softirqs running on the same processor, so there
is no need to disable bottom halves.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

11 years agonfs41: Move initialization of nfs4_opendata seq_res to nfs4_init_opendata_res
Benny Halevy [Fri, 19 Jun 2009 02:01:23 +0000]
nfs41: Move initialization of nfs4_opendata seq_res to nfs4_init_opendata_res

nfs4_open_recover_helper clears opendata->o_res
before calling nfs4_init_opendata_res, thus causing
NFSv4.0 OPEN operations to be sent rather than nfsv4.1.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

11 years agoMerge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 20 Jun 2009 18:30:01 +0000]
Merge branch 'irq-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq, irq.h: Fix kernel-doc warnings
  genirq: fix comment to say IRQ_WAKE_THREAD

11 years agoMerge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Sat, 20 Jun 2009 18:29:32 +0000]
Merge branch 'perfcounters-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
  perfcounter: Handle some IO return values
  perf_counter: Push perf_sample_data through the swcounter code
  perf_counter tools: Define and use our own u64, s64 etc. definitions
  perf_counter: Close race in perf_lock_task_context()
  perf_counter, x86: Improve interactions with fast-gup
  perf_counter: Simplify and fix task migration counting
  perf_counter tools: Add a data file header
  perf_counter: Update userspace callchain sampling uses
  perf_counter: Make callchain samples extensible
  perf report: Filter to parent set by default
  perf_counter tools: Handle lost events
  perf_counter: Add event overlow handling
  fs: Provide empty .set_page_dirty() aop for anon inodes
  perf_counter: tools: Makefile tweaks for 64-bit powerpc
  perf_counter: powerpc: Add processor back-end for MPC7450 family
  perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels
  perf_counter: powerpc: Change how processor-specific back-ends get selected
  perf_counter: powerpc: Use unsigned long for register and constraint values
  perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
  perf_counter tools: Add and use isprint()
  ...

11 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 20 Jun 2009 17:57:40 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix out of scope variable access in sched_slice()
  sched: Hide runqueues from direct refer at source code level
  sched: Remove unneeded __ref tag
  sched, x86: Fix cpufreq + sched_clock() TSC scaling

11 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 20 Jun 2009 17:56:46 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  tracing/urgent: warn in case of ftrace_start_up inbalance
  tracing/urgent: fix unbalanced ftrace_start_up
  function-graph: add stack frame test
  function-graph: disable when both x86_32 and optimize for size are configured
  ring-buffer: have benchmark test print to trace buffer
  ring-buffer: do not grab locks in nmi
  ring-buffer: add locks around rb_per_cpu_empty
  ring-buffer: check for less than two in size allocation
  ring-buffer: remove useless compile check for buffer_page size
  ring-buffer: remove useless warn on check
  ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index
  tracing: update sample event documentation
  tracing/filters: fix race between filter setting and module unload
  tracing/filters: free filter_string in destroy_preds()
  ring-buffer: use commit counters for commit pointer accounting
  ring-buffer: remove unused variable
  ring-buffer: have benchmark test handle discarded events
  ring-buffer: prevent adding write in discarded area
  tracing/filters: strloc should be unsigned short
  tracing/filters: operand can be negative
  ...

Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually

11 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 20 Jun 2009 17:51:44 +0000]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  NOHZ: Properly feed cpufreq ondemand governor

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 20 Jun 2009 17:49:48 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (45 commits)
  x86, mce: fix error path in mce_create_device()
  x86: use zalloc_cpumask_var for mce_dev_initialized
  x86: fix duplicated sysfs attribute
  x86: de-assembler-ize asm/desc.h
  i386: fix/simplify espfix stack switching, move it into assembly
  i386: fix return to 16-bit stack from NMI handler
  x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present
  x86: Remove duplicated #include's
  x86: msr.h linux/types.h is only required for __KERNEL__
  x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround
  x86, mce: mce_intel.c needs <asm/apic.h>
  x86: apic/io_apic.c: dmar_msi_type should be static
  x86, io_apic.c: Work around compiler warning
  x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC present
  x86: mce: Handle banks == 0 case in K7 quirk
  x86, boot: use .code16gcc instead of .code16
  x86: correct the conversion of EFI memory types
  x86: cap iomem_resource to addressable physical memory
  x86, mce: rename _64.c files which are no longer 64-bit-specific
  x86, mce: mce.h cleanup
  ...

Manually fix up trivial conflict in arch/x86/mm/fault.c

11 years agoMerge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Sat, 20 Jun 2009 17:37:01 +0000]
Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add missing symbols for CONSTRUCTORS support
  microblaze: remove init_mm

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
Linus Torvalds [Sat, 20 Jun 2009 17:19:49 +0000]
Merge git://git./linux/kernel/git/sam/kbuild-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kernel-doc: fix param matching for array params
  kernel-doc: ignore kmemcheck_bitfield_begin/end
  kallsyms: fix inverted valid symbol checking
  kbuild: fix build error during make htmldocs