10 years agoblock: max hardware sectors limit wrapper
Mike Snitzer [Fri, 17 Dec 2010 07:34:20 +0000]
block: max hardware sectors limit wrapper

Implement blk_limits_max_hw_sectors() and make
blk_queue_max_hw_sectors() a wrapper around it.

DM needs this to avoid setting queue_limits' max_hw_sectors and
max_sectors directly.  dm_set_device_limits() now leverages
blk_limits_max_hw_sectors() logic to establish the appropriate
max_hw_sectors minimum (PAGE_SIZE).  Fixes issue where DM was
incorrectly setting max_sectors rather than max_hw_sectors (which
caused dm_merge_bvec()'s max_hw_sectors check to be ineffective).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

10 years agoblock: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
Martin K. Petersen [Wed, 1 Dec 2010 18:41:49 +0000]
block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead

When stacking devices, a request_queue is not always available. This
forced us to have a no_cluster flag in the queue_limits that could be
used as a carrier until the request_queue had been set up for a
metadevice.

There were several problems with that approach. First of all it was up
to the stacking device to remember to set queue flag after stacking had
completed. Also, the queue flag and the queue limits had to be kept in
sync at all times. We got that wrong, which could lead to us issuing
commands that went beyond the max scatterlist limit set by the driver.

The proper fix is to avoid having two flags for tracking the same thing.
We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the
block layer merging functions. The queue_limit 'no_cluster' is turned
into 'cluster' to avoid double negatives and to ease stacking.
Clustering defaults to being enabled as before. The queue flag logic is
removed from the stacking function, and explicitly setting the cluster
flag is no longer necessary in DM and MD.

Reported-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

10 years agoblk-throttle: Correct the placement of smp_rmb()
Vivek Goyal [Wed, 1 Dec 2010 18:34:52 +0000]
blk-throttle: Correct the placement of smp_rmb()

o I was discussing what are the variable being updated without spin lock and
  why do we need barriers and Oleg pointed out that location of smp_rmb()
  should be between read of td->limits_changed and tg->limits_changed. This
  patch fixes it.

o Following is one possible sequence of events. Say cpu0 is executing
  throtl_update_blkio_group_read_bps() and cpu1 is executing
  throtl_process_limit_change().

 cpu0                                                cpu1

 tg->limits_changed = true;
 smp_mb__before_atomic_inc();
 atomic_inc(&td->limits_changed);

                                     if (!atomic_read(&td->limits_changed))
                                             return;

                                     if (tg->limits_changed)
                                             do_something;

 If cpu0 has updated tg->limits_changed and td->limits_changed, we want to
 make sure that if update to td->limits_changed is visible on cpu1, then
 update to tg->limits_changed should also be visible.

 Oleg pointed out to ensure that we need to insert an smp_rmb() between
 td->limits_changed read and tg->limits_changed read.

o I had erroneously put smp_rmb() before atomic_read(&td->limits_changed).
  This patch fixes it.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

10 years agoblk-throttle: Trim/adjust slice_end once a bio has been dispatched
Vivek Goyal [Wed, 1 Dec 2010 18:34:46 +0000]
blk-throttle: Trim/adjust slice_end once a bio has been dispatched

o During some testing I did following and noticed throttling stops working.

        - Put a very low limit on a cgroup, say 1 byte per second.
        - Start some reads, this will set slice_end to a very high value.
        - Change the limit to higher value say 1MB/s
        - Now IO unthrottles and finishes as expected.
        - Try to do the read again but IO is not limited to 1MB/s as expected.

o What is happening.
        - Initially low value of limit sets slice_end to a very high value.
        - During updation of limit, slice_end is not being truncated.
        - Very high value of slice_end leads to keeping the existing slice
          valid for a very long time and new slice does not start.
        - tg_may_dispatch() is called in blk_throtle_bio(), and trim_slice()
          is not called in this path. So slice_start is some old value and
          practically we are able to do huge amount of IO.

o There are many ways it can be fixed. I have fixed it by trying to
  adjust/cleanup slice_end in trim_slice(). Generally we extend slices if bio
  is big and can't be dispatched in one slice. After dispatch of bio, readjust
  the slice_end to make sure we don't end up with huge values.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

10 years agoblock: check for proper length of iov entries earlier in blk_rq_map_user_iov()
Xiaotian Feng [Mon, 29 Nov 2010 09:03:55 +0000]
block: check for proper length of iov entries earlier in blk_rq_map_user_iov()

commit 9284bcf checks for proper length of iov entries in
blk_rq_map_user_iov(). But if the map is unaligned, kernel
will break out the loop without checking for the proper length.
So we need to check the proper length before the unalign check.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

10 years agodrbd: fix for spin_lock_irqsave in endio callback
Lars Ellenberg [Sat, 13 Nov 2010 19:42:29 +0000]
drbd: fix for spin_lock_irqsave in endio callback

In commit 9b7f76dc37919ea36caa9680a3f765e5b19b25fb,
 Author: Lars Ellenberg <lars.ellenberg@linbit.com>
 Date:   Wed Aug 11 23:40:24 2010 +0200

    drbd: new configuration parameter c-min-rate

a bad chunk slipped through, which is now reverted as well,
restoring the correct irqsave for the endio callback.

This patch also add comments at both req_mod()
and in the endio callback so it should not happen again.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

10 years agodrbd: don't recvmsg with zero length
Lars Ellenberg [Fri, 29 Oct 2010 21:32:01 +0000]
drbd: don't recvmsg with zero length

This should fix a performance degradation we observed recently.

If we don't expect any subheader, we should not call into the tcp stack,
as that may add considerable latency if there is no data available at
this point.

For a synthetic synchronous write load with single outstanding writes,
this additional latency when processing the "unplug remote" packet
added up to a performance degradation factor >= 10.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

10 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Fri, 26 Nov 2010 22:30:30 +0000]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Ensure we return the dirent->d_type when it is known
  NFS: Correct the array bound calculation in nfs_readdir_add_to_array
  NFS: Don't ignore errors from nfs_do_filldir()
  NFS: Fix the error handling in "uncached_readdir()"
  NFS: Fix a page leak in uncached_readdir()
  NFS: Fix a page leak in nfs_do_filldir()
  NFS: Assume eof if the server returns no readdir records
  NFS: Buffer overflow in ->decode_dirent() should not be fatal
  Pure nfs client performance using odirect.
  SUNRPC: Fix an infinite loop in call_refresh/call_refreshresult

10 years agoMerge branch 'linux-next' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Fri, 26 Nov 2010 22:30:08 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: release locks in check_corruption

10 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 26 Nov 2010 22:29:20 +0000]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  posix-cpu-timers: Rcu_read_lock/unlock protect find_task_by_vpid call

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 26 Nov 2010 22:28:47 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  dmar, x86: Use function stubs when CONFIG_INTR_REMAP is disabled
  x86-64: Fix and clean up AMD Fam10 MMCONF enabling
  x86: UV: Address interrupt/IO port operation conflict
  x86: Use online node real index in calulate_tbl_offset()
  x86, asm: Fix binutils 2.15 build failure

10 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 26 Nov 2010 22:28:17 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf symbols: Remove incorrect open-coded container_of()
  perf record: Handle restrictive permissions in /proc/{kallsyms,modules}
  x86/kprobes: Prevent kprobes to probe on save_args()
  irq_work: Drop cmpxchg() result
  perf: Fix owner-list vs exit
  x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
  tracing: Fix recursive user stack trace
  perf,hw_breakpoint: Initialize hardware api earlier
  x86: Ignore trap bits on single step exceptions
  tracing: Force arch_local_irq_* notrace for paravirt
  tracing: Fix module use of trace_bprintk()

10 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 26 Nov 2010 22:27:54 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix idle balancing
  sched: Fix volanomark performance regression

10 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 26 Nov 2010 22:26:48 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] qdio: free indicator after reset is finished
  [S390] nmi: fix clock comparator revalidation

10 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 26 Nov 2010 22:17:50 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix build for PROC_FS disabled
  block: fix amiga and atari floppy driver compile warning
  blk-throttle: Fix calculation of max number of WRITES to be dispatched
  ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()
  xen/blkfront: cope with backend that fail empty BLKIF_OP_WRITE_BARRIER requests
  xen/blkfront: Implement FUA with BLKIF_OP_WRITE_BARRIER
  xen/blkfront: change blk_shadow.request to proper pointer
  xen/blkfront: map REQ_FLUSH into a full barrier

10 years agoMerge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 26 Nov 2010 22:17:16 +0000]
Merge branch 'rmobile-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: clock-sh7372: remove bogus pllc2 clock toggling.
  ARM: mach-shmobile: clock-sh7372: remove unnecessary fsi clocks
  ARM: mach-shmobile: clock-sh7372: modify error code
  ARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642
  ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI
  ARM: mach-shmobile: clock-sh7372: remove fsidiv bogus disable
  ARM: mach-shmobile: sh7372 USB0/IIC1 MSTP fix

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Fri, 26 Nov 2010 22:16:29 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sdhci: 8-bit bus width changes
  mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD
  mmc: sdio: fix nasty oops in mmc_sdio_detect
  mmc: omap4: hsmmc: Fix improper card detection while booting
  mmc: fix rmmod race for hosts using card-detection polling
  mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platforms
  mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35
  mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci
  mmc: sdhci: Properly enable SDIO IRQ wakeups
  mmc: ushc: Return proper error code for ushc_probe()
  mmc: Fix printing of card DDR type

10 years agoMerge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 26 Nov 2010 22:15:25 +0000]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV210: Fix sysdev related warning messages
  ARM: S3C24XX: Fix UART3 submask on S3C2416 and S3C2443
  ARM: S3C24XX: Fix Demux error in UART3 irqs on S3C2443 and S3C2416
  ARM: S3C64XX: fix uart clock setup for mini6410/real6410
  ARM: S3C24XX: Fix wrong s3c_gpio_cfgpull
  ARM: S3C2410: Adapt h1940-bluetooth to gpiolib changes

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Fri, 26 Nov 2010 22:14:00 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix typo in comment of nilfs_dat_move function
  nilfs2: nilfs_iget_for_gc() returns ERR_PTR

10 years agodmar, x86: Use function stubs when CONFIG_INTR_REMAP is disabled
Randy Dunlap [Mon, 22 Nov 2010 20:48:34 +0000]
dmar, x86: Use function stubs when CONFIG_INTR_REMAP is disabled

The stubs for CONFIG_INTR_REMAP disabled need to be functions
instead of values to eliminate build warnings.

 arch/x86/kernel/apic/apic.c: In function 'lapic_suspend':
 arch/x86/kernel/apic/apic.c:2060:3: warning: statement with no effect
 arch/x86/kernel/apic/apic.c: In function 'lapic_resume':
 arch/x86/kernel/apic/apic.c:2137:3: warning: statement with no effect

Reported-and-Tested-by: Fabio Comolli <fabio.comolli@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <20101122124834.74429004.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years ago[S390] qdio: free indicator after reset is finished
Jan Glauber [Thu, 25 Nov 2010 08:52:46 +0000]
[S390] qdio: free indicator after reset is finished

The qdio device indicator is freed before the device is notified that
the indicator is reset. This sequence contains a race when the freed
indicator is used by a new device while the reset of the indicator is
still pending. Do the reset operation before freeing the indicator to
avoid that potential race.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

10 years ago[S390] nmi: fix clock comparator revalidation
Heiko Carstens [Thu, 25 Nov 2010 08:52:45 +0000]
[S390] nmi: fix clock comparator revalidation

On each machine check all registers are revalidated. The save area for
the clock comparator however only contains the upper most seven bytes
of the former contents, if valid.
Therefore the machine check handler uses a store clock instruction to
get the current time and writes that to the clock comparator register
which in turn will generate an immediate timer interrupt.
However within the lowcore the expected time of the next timer
interrupt is stored. If the interrupt happens before that time the
handler won't be called. In turn the clock comparator won't be
reprogrammed and therefore the interrupt condition stays pending which
causes an interrupt loop until the expected time is reached.

On NOHZ machines this can result in unresponsive machines since the
time of the next expected interrupted can be a couple of days in the
future.

To fix this just revalidate the clock comparator register with the
expected value.
In addition the special handling for udelay must be changed as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

10 years agoARM: S5PV210: Fix sysdev related warning messages
Abhilash Kesavan [Fri, 8 Oct 2010 03:37:19 +0000]
ARM: S5PV210: Fix sysdev related warning messages

This patch fixes following warning messages when CONFIG_PM selected.

In file included from arch/arm/mach-s5pv210/mach-smdkv210.c:34:
arch/arm/plat-samsung/include/plat/pm.h:104: warning: 'struct sys_device'
declared inside parameter list
arch/arm/plat-samsung/include/plat/pm.h:104: warning: its scope is only this
definition or declaration, which is probably not what you want
arch/arm/plat-samsung/include/plat/pm.h:105: warning: 'struct sys_device'
declared inside parameter list

In file included from arch/arm/mach-s5pv210/mach-smdkc110.c:31:
arch/arm/plat-samsung/include/plat/pm.h:104: warning: 'struct sys_device'
declared inside parameter list
arch/arm/plat-samsung/include/plat/pm.h:104: warning: its scope is only this
definition or declaration, which is probably not what you want
arch/arm/plat-samsung/include/plat/pm.h:105: warning: 'struct sys_device'
declared inside parameter list

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

10 years agoARM: S3C24XX: Fix UART3 submask on S3C2416 and S3C2443
Abhilash Kesavan [Thu, 21 Oct 2010 01:15:48 +0000]
ARM: S3C24XX: Fix UART3 submask on S3C2416 and S3C2443

The UART3 submask should be 0x7 (SUBSRCPND[26:24]).

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

10 years agoARM: S3C24XX: Fix Demux error in UART3 irqs on S3C2443 and S3C2416
Abhilash Kesavan [Thu, 21 Oct 2010 01:15:48 +0000]
ARM: S3C24XX: Fix Demux error in UART3 irqs on S3C2443 and S3C2416

IRQ_S3C2443_UART3 is being used as the base when it should actually
be IRQ_S3C2443_RX3 on S3C2443 and S3C2416 for the UART3.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

10 years agoARM: S3C64XX: fix uart clock setup for mini6410/real6410
Darius Augulis [Tue, 16 Nov 2010 09:08:50 +0000]
ARM: S3C64XX: fix uart clock setup for mini6410/real6410

Don't rewrite clock config in UCON preconfigured by
bootloader. No need to set 10th bit in UCON because
[11:10] 2'b00 means source clock is PCLK too.
If set, console does not work if bootloader
has preconfigured [11:10] with 2'b00.
If not set, console works with any bootloader
config value (2'bxx).
More information about clock setup in UCON is available
in "S3C6410X RISC Microprocessor User's Manual,
Revision 1.20" p. 31-13 (Chapter 31.6.2
UART CONTROL REGISTER).

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

10 years agoARM: S3C24XX: Fix wrong s3c_gpio_cfgpull
Kukjin Kim [Mon, 15 Nov 2010 02:11:22 +0000]
ARM: S3C24XX: Fix wrong s3c_gpio_cfgpull

This patch fixes wrong s3c_gpio_cfgpull with s3c_gpio_setpull.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

10 years agoARM: S3C2410: Adapt h1940-bluetooth to gpiolib changes
Vasily Khoruzhick [Tue, 16 Nov 2010 09:11:59 +0000]
ARM: S3C2410: Adapt h1940-bluetooth to gpiolib changes

Replace in s3c_gpio_cfgpull with s3c_gpio_setpull.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

10 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Wed, 24 Nov 2010 23:36:24 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (lis3lv02d_i2c) Fix compile warnings
  hwmon: (i5k_amb) Fix compile warning

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Linus Torvalds [Wed, 24 Nov 2010 23:35:53 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/konrad/xen

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: remove duplicated #include
  xen: x86/32: perform initial startup on initial_page_table

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Wed, 24 Nov 2010 22:42:32 +0000]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: fix memchr() not to dereference memory for zero length
  arch/tile: make glibc's sysconf(_SC_NPROCESSORS_CONF) work correctly
  arch/tile: fix rwlock so would-be write lockers don't block new readers

10 years agoMerge branch 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf...
Linus Torvalds [Wed, 24 Nov 2010 22:42:03 +0000]
Merge branch 'drivers' of git://git./linux/kernel/git/cmetcalf/linux-tile

* 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  pci root complex: support for tile architecture
  drivers/net/tile/: on-chip network drivers for the tile architecture
  MAINTAINERS: add drivers/char/hvc_tile.c as maintained by tile

10 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Wed, 24 Nov 2010 22:41:10 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6482/2: Fix find_next_zero_bit and related assembly
  ARM: 6490/1: MM: bugfix: initialize spinlock for init_mm.context
  ARM: avoid annoying <4>'s in printk output
  SCSI: arm fas216: fix missing ';'
  ARM: avoid marking decompressor .stack section as having contents
  ARM: 6489/1: thumb2: fix incorrect optimisation in usracc
  ARM: 6488/1: nomadik: prevent sched_clock() wraparound
  ARM: 6484/1: fix compile warning in mm/init.c
  ARM: 6473/1: Small update to ux500 specific L2 cache code
  ARM: improve compiler's ability to optimize page tables
  mx25: fix spi device registration typo
  ARM i.MX27 eukrea: Fix compilation
  ARM i.MX spi: fix compilation for i.MX21
  ARM i.MX pcm037 eet: compile fixes
  ARM i.MX: sdma is merged, so remove #ifdef SDMA_IS_MERGED
  ARM mx3fb: check for DMA engine type
  mach-pcm037_eet: Fix section mismatch for eet_init_devices()

10 years agoMerge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 24 Nov 2010 21:58:56 +0000]
Merge branch 'fbdev-fixes-for-linus' of git://git./linux/kernel/git/lethal/fbdev-2.6

* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
  sisfb: delete osdef.h
  sisfb: move the CONFIG warning to sis_main.c
  sisfb: replace SiS_SetMemory with memset_io
  sisfb: remove InPort/OutPort wrappers
  sisfb: use CONFIG_FB_SIS_301/315 instead of SIS301/315H
  sisfb: delete redudant #define SIS_LINUX_KERNEL
  sisfb: delete dead SIS_XORG_XF86 code
  sisfb: delete fallback code for pci_map_rom()
  sisfb: delete obsolete PCI ROM bug workaround
  fbdev: Update documentation index file.
  lxfb: Program panel v/h sync output polarity correctly
  fbcmap: integer overflow bug
  fbcmap: cleanup white space in fb_alloc_cmap()
  MAINTAINERS: Add fbdev patchwork entry, tidy up file patterns.
  fbdev: da8xx: punt duplicated FBIO_WAITFORVSYNC define
  fbdev: sh_mobile_lcdcfb: fix bug in reconfig()

10 years agoMerge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 24 Nov 2010 21:58:19 +0000]
Merge branch 'sh-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: clkfwk: Build fix for non-legacy CPG changes.
  sh: Use GCC __builtin_prefetch() to implement prefetch().
  sh: fix vsyscall compilation due to .eh_frame issue
  sh: avoid to flush all cache in sys_cacheflush
  sh: clkfwk: Disable init clk op for non-legacy clocks.
  sh: clkfwk: Kill off now unused algo_id in set_rate op.
  sh: clkfwk: Kill off unused clk_set_rate_ex().

10 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Wed, 24 Nov 2010 21:57:43 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: Call blk_queue_flush() to establish flush/fua support
  md/raid1: really fix recovery looping when single good device fails.
  md: fix return value of rdev_size_change()

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
Linus Torvalds [Wed, 24 Nov 2010 21:57:11 +0000]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio: fix format of sysfs driver/vendor files
  Char: virtio_console, fix memory leak
  virtio: return correct capacity to users
  module: Update prototype for ref_module (formerly use_module)

10 years agoarch/x86/include/asm/fixmap.h: mark __set_fixmap_offset as __always_inline
Andrew Morton [Wed, 24 Nov 2010 20:57:18 +0000]
arch/x86/include/asm/fixmap.h: mark __set_fixmap_offset as __always_inline

When compiling arch/x86/kernel/early_printk_mrst.c with i386
allmodconfig, gcc-4.1.0 generates an out-of-line copy of
__set_fixmap_offset() which contains a reference to
__this_fixmap_does_not_exist which the compiler cannot elide.

Marking __set_fixmap_offset() as __always_inline prevents this.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Feng Tang <feng.tang@intel.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoscripts: fix gfp-translate for recent changes to gfp.h
Mel Gorman [Wed, 24 Nov 2010 20:57:17 +0000]
scripts: fix gfp-translate for recent changes to gfp.h

The recent changes to gfp.h to satisfy sparse broke scripts/gfp-translate.
This patch fixes it up to work with old and new versions of gfp.h .

[akpm@linux-foundation.org: use `grep -q', per WANG Cong]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Namhyung Kim <namhyung@gmail.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoreiserfs: fix inode mutex - reiserfs lock misordering
Frederic Weisbecker [Wed, 24 Nov 2010 20:57:15 +0000]
reiserfs: fix inode mutex - reiserfs lock misordering

reiserfs_unpack() locks the inode mutex with reiserfs_mutex_lock_safe()
to protect against reiserfs lock dependency.  However this protection
requires to have the reiserfs lock to be locked.

This is the case if reiserfs_unpack() is called by reiserfs_ioctl but
not from reiserfs_quota_on() when it tries to unpack tails of quota
files.

Fix the ordering of the two locks in reiserfs_unpack() to fix this
issue.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: Markus Gapp <markus.gapp@gmx.net>
Reported-by: Jan Kara <jack@suse.cz>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: <stable@kernel.org> [2.6.36.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agobacklight: grab ops_lock before testing bd->ops
Uwe Kleine-König [Wed, 24 Nov 2010 20:57:14 +0000]
backlight: grab ops_lock before testing bd->ops

According to the comment describing ops_lock in the definition of struct
backlight_device and when comparing with other functions in backlight.c
the mutex must be hold when checking ops to be non-NULL.

Fixes a problem added by c835ee7f4154992e6 ("backlight: Add suspend/resume
support to the backlight core") in Jan 2009.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/misc/isl29020.c: remove incorrect kfree in isl29020_remove()
Axel Lin [Wed, 24 Nov 2010 20:57:14 +0000]
drivers/misc/isl29020.c: remove incorrect kfree in isl29020_remove()

struct als_data *data is not used in this driver at all.

Also add a missing ">" character for MODULE_AUTHOR.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agopagemap: set pagemap walk limit to PMD boundary
Naoya Horiguchi [Wed, 24 Nov 2010 20:57:13 +0000]
pagemap: set pagemap walk limit to PMD boundary

Currently one pagemap_read() call walks in PAGEMAP_WALK_SIZE bytes (== 512
pages.) But there is a corner case where walk_pmd_range() accidentally
runs over a VMA associated with a hugetlbfs file.

For example, when a process has mappings to VMAs as shown below:

  # cat /proc/<pid>/maps
  ...
  3a58f6d000-3a58f72000 rw-p 00000000 00:00 0
  7fbd51853000-7fbd51855000 rw-p 00000000 00:00 0
  7fbd5186c000-7fbd5186e000 rw-p 00000000 00:00 0
  7fbd51a00000-7fbd51c00000 rw-s 00000000 00:12 8614   /hugepages/test

then pagemap_read() goes into walk_pmd_range() path and walks in the range
0x7fbd51853000-0x7fbd51a53000, but the hugetlbfs VMA should be handled by
walk_hugetlb_range().  Otherwise PMD for the hugepage is considered bad
and cleared, which causes undesirable results.

This patch fixes it by separating pagemap walk range into one PMD.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomm: remove call to find_vma in pagewalk for non-hugetlbfs
David Sterba [Wed, 24 Nov 2010 20:57:10 +0000]
mm: remove call to find_vma in pagewalk for non-hugetlbfs

Commit d33b9f45 ("mm: hugetlb: fix hugepage memory leak in
walk_page_range()") introduces a check if a vma is a hugetlbfs one and
later in 5dc37642 ("mm hugetlb: add hugepage support to pagemap") it is
moved under #ifdef CONFIG_HUGETLB_PAGE but a needless find_vma call is
left behind and its result is not used anywhere else in the function.

The side-effect of caching vma for @addr inside walk->mm is neither
utilized in walk_page_range() nor in called functions.

Signed-off-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomm/page_alloc.c: fix build_all_zonelist() where percpu_alloc() is wrongly called...
KAMEZAWA Hiroyuki [Wed, 24 Nov 2010 20:57:09 +0000]
mm/page_alloc.c: fix build_all_zonelist() where percpu_alloc() is wrongly called under stop_machine_run()

During memory hotplug, build_allzonelists() may be called under
stop_machine_run().  In this function, setup_zone_pageset() is called.
But it's bug because it will do page allocation under stop_machine_run().

Here is a report from Alok Kataria.

  BUG: sleeping function called from invalid context at kernel/mutex.c:94
  in_atomic(): 0, irqs_disabled(): 1, pid: 4, name: migration/0
  Pid: 4, comm: migration/0 Not tainted 2.6.35.6-45.fc14.x86_64 #1
  Call Trace:
   [<ffffffff8103d12b>] __might_sleep+0xeb/0xf0
   [<ffffffff81468245>] mutex_lock+0x24/0x50
   [<ffffffff8110eaa6>] pcpu_alloc+0x6d/0x7ee
   [<ffffffff81048888>] ? load_balance+0xbe/0x60e
   [<ffffffff8103a1b3>] ? rt_se_boosted+0x21/0x2f
   [<ffffffff8103e1cf>] ? dequeue_rt_stack+0x18b/0x1ed
   [<ffffffff8110f237>] __alloc_percpu+0x10/0x12
   [<ffffffff81465e22>] setup_zone_pageset+0x38/0xbe
   [<ffffffff810d6d81>] ? build_zonelists_node.clone.58+0x79/0x8c
   [<ffffffff81452539>] __build_all_zonelists+0x419/0x46c
   [<ffffffff8108ef01>] ? cpu_stopper_thread+0xb2/0x198
   [<ffffffff8108f075>] stop_machine_cpu_stop+0x8e/0xc5
   [<ffffffff8108efe7>] ? stop_machine_cpu_stop+0x0/0xc5
   [<ffffffff8108ef57>] cpu_stopper_thread+0x108/0x198
   [<ffffffff81467a37>] ? schedule+0x5b2/0x5cc
   [<ffffffff8108ee4f>] ? cpu_stopper_thread+0x0/0x198
   [<ffffffff81065f29>] kthread+0x7f/0x87
   [<ffffffff8100aae4>] kernel_thread_helper+0x4/0x10
   [<ffffffff81065eaa>] ? kthread+0x0/0x87
   [<ffffffff8100aae0>] ? kernel_thread_helper+0x0/0x10
  Built 5 zonelists in Node order, mobility grouping on.  Total pages: 289456
  Policy zone: Normal

This patch tries to fix the issue by moving setup_zone_pageset() out from
stop_machine_run(). It's obviously not necessary to be called under
stop_machine_run().

[akpm@linux-foundation.org: remove unneeded local]
Reported-by: Alok Kataria <akataria@vmware.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Petr Vandrovec <petr@vmware.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agocgroups: make swap accounting default behavior configurable
Michal Hocko [Wed, 24 Nov 2010 20:57:08 +0000]
cgroups: make swap accounting default behavior configurable

Swap accounting can be configured by CONFIG_CGROUP_MEM_RES_CTLR_SWAP
configuration option and then it is turned on by default.  There is a boot
option (noswapaccount) which can disable this feature.

This makes it hard for distributors to enable the configuration option as
this feature leads to a bigger memory consumption and this is a no-go for
general purpose distribution kernel.  On the other hand swap accounting
may be very usuful for some workloads.

This patch adds a new configuration option which controls the default
behavior (CGROUP_MEM_RES_CTLR_SWAP_ENABLED).  If the option is selected
then the feature is turned on by default.

It also adds a new boot parameter swapaccount[=1|0] which enhances the
original noswapaccount parameter semantic by means of enable/disable logic
(defaults to 1 if no value is provided to be still consistent with
noswapaccount).

The default behavior is unchanged (if CONFIG_CGROUP_MEM_RES_CTLR_SWAP is
enabled then CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is enabled as well)

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomemcg: avoid deadlock between move charge and try_charge()
Daisuke Nishimura [Wed, 24 Nov 2010 20:57:06 +0000]
memcg: avoid deadlock between move charge and try_charge()

__mem_cgroup_try_charge() can be called under down_write(&mmap_sem)(e.g.
mlock does it). This means it can cause deadlock if it races with move charge:

Ex.1)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |  down_write(&mmap_sem)
      mc.moving_task = current          |    ..
      mem_cgroup_precharge_mc()         |  __mem_cgroup_try_charge()
        mem_cgroup_count_precharge()    |    prepare_to_wait()
          down_read(&mmap_sem)          |    if (mc.moving_task)
          -> cannot aquire the lock     |    -> true
                                        |      schedule()

Ex.2)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |
      mc.moving_task = current          |
      mem_cgroup_precharge_mc()         |
        mem_cgroup_count_precharge()    |
          down_read(&mmap_sem)          |
          ..                            |
          up_read(&mmap_sem)            |
                                        |  down_write(&mmap_sem)
    mem_cgroup_move_task()              |    ..
      mem_cgroup_move_charge()          |  __mem_cgroup_try_charge()
        down_read(&mmap_sem)            |    prepare_to_wait()
        -> cannot aquire the lock       |    if (mc.moving_task)
                                        |    -> true
                                        |      schedule()

To avoid this deadlock, we do all the move charge works (both can_attach() and
attach()) under one mmap_sem section.
And after this patch, we set/clear mc.moving_task outside mc.lock, because we
use the lock only to check mc.from/to.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/leds/leds-lp5523.c: perform SW reset before detection
Samu Onkalo [Wed, 24 Nov 2010 20:57:05 +0000]
drivers/leds/leds-lp5523.c: perform SW reset before detection

Chip detection may fail if the chip is in some odd state for example after
system restart.  Chip doesn't have HW reset line.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/leds/leds-lp5521.c: perform SW reset before detection
Samu Onkalo [Wed, 24 Nov 2010 20:57:05 +0000]
drivers/leds/leds-lp5521.c: perform SW reset before detection

Chip detection may fail if the chip is in some odd state for example after
system restart.  Chip doesn't have HW reset line.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/leds/leds-lp5523.c: adjust delays and add comments to them
Samu Onkalo [Wed, 24 Nov 2010 20:57:04 +0000]
drivers/leds/leds-lp5523.c: adjust delays and add comments to them

Delays were little bit too long.  Adjust delay times and add some comments
to them.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/leds/leds-lp5521.c: adjust delays and add comments to them
Samu Onkalo [Wed, 24 Nov 2010 20:57:03 +0000]
drivers/leds/leds-lp5521.c: adjust delays and add comments to them

Delays were little bit too long.  Adjust delay times and add some comments
to them.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/leds/leds-lp5523.c: change some macros to functions
Samu Onkalo [Wed, 24 Nov 2010 20:57:03 +0000]
drivers/leds/leds-lp5523.c: change some macros to functions

A small macro changed to inline function to have proper type checking.
Inline added to two similar small functions.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/leds/leds-lp5521.c: change some macros to functions
Samu Onkalo [Wed, 24 Nov 2010 20:57:02 +0000]
drivers/leds/leds-lp5521.c: change some macros to functions

Some small macros changed to inline functions to have proper type
checking.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agofuse: fix attributes after open(O_TRUNC)
Ken Sumrall [Wed, 24 Nov 2010 20:57:00 +0000]
fuse: fix attributes after open(O_TRUNC)

The attribute cache for a file was not being cleared when a file is opened
with O_TRUNC.

If the filesystem's open operation truncates the file ("atomic_o_trunc"
feature flag is set) then the kernel should invalidate the cached st_mtime
and st_ctime attributes.

Also i_size should be explicitly be set to zero as it is used sometimes
without refreshing the cache.

Signed-off-by: Ken Sumrall <ksumrall@android.com>
Cc: Anfei <anfei.zhou@gmail.com>
Cc: "Anand V. Avati" <avati@gluster.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosgi-xpc: XPC fails to discover partitions with all nasids above 128
Robin@sgi.com [Wed, 24 Nov 2010 20:56:59 +0000]
sgi-xpc: XPC fails to discover partitions with all nasids above 128

UV hardware defines 256 memory protection regions versus the baseline 64
with increasing size for the SN2 ia64.  This was overlooked when XPC was
modified to accomodate both UV and SN2.

Without this patch, a user could reconfigure their existing system and
suddenly disable cross-partition communications with no indication of what
has gone wrong.  It also prevents larger configurations from using
cross-partition communication.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomemcg: fix false positive VM_BUG on non-SMP
Kirill A. Shutemov [Wed, 24 Nov 2010 20:56:58 +0000]
memcg: fix false positive VM_BUG on non-SMP

Fix this:

  kernel BUG at mm/memcontrol.c:2155!
  invalid opcode: 0000 [#1]
  last sysfs file:

  Pid: 18, comm: sh Not tainted 2.6.37-rc3 #3 /Bochs
  EIP: 0060:[<c10731b2>] EFLAGS: 00000246 CPU: 0
  EIP is at mem_cgroup_move_account+0xe2/0xf0
  EAX: 00000004 EBX: c6f931d4 ECX: c681c300 EDX: c681c000
  ESI: c681c300 EDI: ffffffea EBP: c681c000 ESP: c46f3e30
   DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
  Process sh (pid: 18, ti=c46f2000 task=c6826e60 task.ti=c46f2000)
  Stack:
   00000155 c681c000 0805f000 c46ee180 c46f3e5c c7058820 c1074d37 00000000
   08060000 c46db9a0 c46ec080 c7058820 0805f000 08060000 c46f3e98 c1074c50
   c106c75e c46f3e98 c46ec080 08060000 0805ffff c46db9a0 c46f3e98 c46e0340
  Call Trace:
   [<c1074d37>] ? mem_cgroup_move_charge_pte_range+0xe7/0x130
   [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130
   [<c106c75e>] ? walk_page_range+0xee/0x1d0
   [<c10725d6>] ? mem_cgroup_move_task+0x66/0x90
   [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130
   [<c1072570>] ? mem_cgroup_move_task+0x0/0x90
   [<c1042616>] ? cgroup_attach_task+0x136/0x200
   [<c1042878>] ? cgroup_tasks_write+0x48/0xc0
   [<c1041e9e>] ? cgroup_file_write+0xde/0x220
   [<c101398d>] ? do_page_fault+0x17d/0x3f0
   [<c108a79d>] ? alloc_fd+0x2d/0xd0
   [<c1041dc0>] ? cgroup_file_write+0x0/0x220
   [<c1077ba2>] ? vfs_write+0x92/0xc0
   [<c1077c81>] ? sys_write+0x41/0x70
   [<c1140e3d>] ? syscall_call+0x7/0xb
  Code: 03 00 74 09 8b 44 24 04 e8 1c f1 ff ff 89 73 04 8d 86 b0 00 00 00 b9 01 00 00 00 89 da 31 ff e8 65 f5 ff ff e9 4d ff ff ff 0f 0b <0f> 0b 0f 0b 0f 0b 90 8d b4 26 00 00 00 00 83 ec 10 8b 0d f4 e3
  EIP: [<c10731b2>] mem_cgroup_move_account+0xe2/0xf0 SS:ESP 0068:c46f3e30
  ---[ end trace 7daa1582159b6532 ]---

lock_page_cgroup and unlock_page_cgroup are implemented using
bit_spinlock.  bit_spinlock doesn't touch the bit if we are on non-SMP
machine, so we can't use the bit to check whether the lock was taken.

Let's introduce is_page_cgroup_locked based on bit_spin_is_locked instead
of PageCgroupLocked to fix it.

[akpm@linux-foundation.org: s/is_page_cgroup_locked/page_is_cgroup_locked/]
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agouml: disable winch irq before freeing handler data
Will Newton [Wed, 24 Nov 2010 20:56:55 +0000]
uml: disable winch irq before freeing handler data

Disable the winch irq early to make sure we don't take an interrupt part
way through the freeing of the handler data, resulting in a crash on
shutdown:

  winch_interrupt : read failed, errno = 9
  fd 13 is losing SIGWINCH support
  ------------[ cut here ]------------
  WARNING: at lib/list_debug.c:48 list_del+0xc6/0x100()
  list_del corruption, next is LIST_POISON1 (00100100)
  082578c8:  [<081fd77f>] dump_stack+0x22/0x24
  082578e0:  [<0807a18a>] warn_slowpath_common+0x5a/0x80
  08257908:  [<0807a23e>] warn_slowpath_fmt+0x2e/0x30
  08257920:  [<08172196>] list_del+0xc6/0x100
  08257940:  [<08060244>] free_winch+0x14/0x80
  08257958:  [<080606fb>] winch_interrupt+0xdb/0xe0
  08257978:  [<080a65b5>] handle_IRQ_event+0x35/0xe0
  08257998:  [<080a8717>] handle_edge_irq+0xb7/0x170
  082579bc:  [<08059bc4>] do_IRQ+0x34/0x50
  082579d4:  [<08059e1b>] sigio_handler+0x5b/0x80
  082579ec:  [<0806a374>] sig_handler_common+0x44/0xb0
  08257a68:  [<0806a538>] sig_handler+0x38/0x50
  08257a78:  [<0806a77c>] handle_signal+0x5c/0xa0
  08257a9c:  [<0806be28>] hard_handler+0x18/0x20
  08257aac:  [<00c14400>] 0xc14400

Signed-off-by: Will Newton <will.newton@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agonommu: yield CPU while disposing VM
Steven J. Magnani [Wed, 24 Nov 2010 20:56:54 +0000]
nommu: yield CPU while disposing VM

Depending on processor speed, page size, and the amount of memory a
process is allowed to amass, cleanup of a large VM may freeze the system
for many seconds.  This can result in a watchdog timeout.

Make sure other tasks receive some service when cleaning up large VMs.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoinclude/linux/fs.h: fix userspace build
Loïc Minier [Wed, 24 Nov 2010 20:56:53 +0000]
include/linux/fs.h: fix userspace build

dpkg uses fiemap but didn't particularly need to include stdint.h so far.
Since 367a51a33902 ("fs: Add FITRIM ioctl"), build of linux/fs.h failed in
dpkg with:

  In file included from ../../src/filesdb.c:27:0:
  /usr/include/linux/fs.h:37:2: error: expected specifier-qualifier-list before 'uint64_t'

Use exportable type __u64 to avoid the dependency on stdint.h.

b31d42a5af18 ("Fix compile brekage with !CONFIG_BLOCK") fixed only the
kernel build by including linux/types.h, but this also fixed "make
headers_check", so don't revert it.

Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Tested-by: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoleds: fix bug with reading NAS SS4200 dmi code
Steven Rostedt [Wed, 24 Nov 2010 20:56:52 +0000]
leds: fix bug with reading NAS SS4200 dmi code

While running randconfg with ktest.pl I stumbled upon this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
  IP: [<ffffffff815fe44f>] strstr+0x39/0x86
  PGD 0
  Oops: 0000 [#1] SMP
  last sysfs file:
  CPU 0
  Modules linked in:

  Pid: 1, comm: swapper Not tainted 2.6.37-rc1-test+ #6 DG965MQ/
  RIP: 0010:[<ffffffff815fe44f>]  [<ffffffff815fe44f>] strstr+0x39/0x86
  RSP: 0018:ffff8800797cbd80  EFLAGS: 00010213
  RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffffffffffff
  RDX: 0000000000000000 RSI: ffffffff82eb7ac9 RDI: 0000000000000003
  RBP: ffff8800797cbda0 R08: ffff880000000003 R09: 0000000000030725
  R10: ffff88007d294c00 R11: 0000000000014c00 R12: 0000000000000020
  R13: ffffffff82eb7ac9 R14: ffffffffffffffff R15: ffffffff82eb7b08
  FS:  0000000000000000(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000003 CR3: 0000000002a1d000 CR4: 00000000000006f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process swapper (pid: 1, threadinfo ffff8800797ca000, task ffff8800797d0000)
  Stack:
   00000000000000ba ffffffff82eb7ac9 ffffffff82eb7ab8 00000000000000ba
   ffff8800797cbdf0 ffffffff81e2050f ffff8800797cbdc0 00000000815f913b
   ffff8800797cbe00 ffffffff82eb7ab8 0000000000000000 0000000000000000
  Call Trace:
   [<ffffffff81e2050f>] dmi_matches+0x117/0x154
   [<ffffffff81e205d7>] dmi_check_system+0x3d/0x8d
   [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
   [<ffffffff82e1ad49>] nas_gpio_init+0x24/0x2c8
   [<ffffffff820d750d>] ? wm8350_led_init+0x0/0x20
   [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
   [<ffffffff810022f7>] do_one_initcall+0xab/0x1b2
   [<ffffffff82da749c>] kernel_init+0x248/0x331
   [<ffffffff8100e624>] kernel_thread_helper+0x4/0x10
   [<ffffffff82da7254>] ? kernel_init+0x0/0x331

Found that the nas_led_whitelist dmi_system_id structure array had no
NULL end delimiter, causing the dmi_check_system() loop to read an
undefined entry.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Dave Hansen <dave@sr71.net>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoARM: 6482/2: Fix find_next_zero_bit and related assembly
James Jones [Tue, 23 Nov 2010 23:21:37 +0000]
ARM: 6482/2: Fix find_next_zero_bit and related assembly

The find_next_bit, find_first_bit, find_next_zero_bit
and find_first_zero_bit functions were not properly
clamping to the maxbit argument at the bit level. They
were instead only checking maxbit at the byte level.
To fix this, add a compare and a conditional move
instruction to the end of the common bit-within-the-
byte code used by all the functions and be sure not to
clobber the maxbit argument before it is used.

Cc: <stable@kernel.org>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoarch/tile: fix memchr() not to dereference memory for zero length
Chris Metcalf [Wed, 24 Nov 2010 18:57:42 +0000]
arch/tile: fix memchr() not to dereference memory for zero length

This change fixes a bug that memchr() will read the first word
of the source even if the length is zero.  Ironically, the code
was originally written with a test to avoid exactly this problem,
but to make the code conform to Linux coding standards with all
declarations preceding all statements, the first load from memory
was moved up above that test as the initial value for a variable.

The change just moves all the variable declarations to the top
of the file, with no initializers, so that the test can also be
at the top of the file.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

10 years agoarch/tile: make glibc's sysconf(_SC_NPROCESSORS_CONF) work correctly
Chris Metcalf [Wed, 24 Nov 2010 18:42:15 +0000]
arch/tile: make glibc's sysconf(_SC_NPROCESSORS_CONF) work correctly

glibc assumes that it can count /sys/devices/system/cpu/cpu* to get
the number of configured cpus.  For this to be valid on tile, we need
to generate a "cpu" entry for all cpus, including the ones that are
not currently allocated for Linux's use.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

10 years agoMerge branch 'master' into for-linus
Chris Metcalf [Wed, 24 Nov 2010 18:30:28 +0000]
Merge branch 'master' into for-linus

10 years agopci root complex: support for tile architecture
Chris Metcalf [Tue, 2 Nov 2010 16:05:10 +0000]
pci root complex: support for tile architecture

This change enables PCI root complex support for TILEPro.  Unlike
TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI
support consists of hypervisor upcalls for PIO, DMA, etc.  However,
the performance is fine for the devices we have tested with so far
(1Gb Ethernet, SATA, etc.).

The <asm/io.h> header was tweaked to be a little bit more aggressive
about disabling attempts to map/unmap IO port space.  The hacky
<asm/pci-bridge.h> header was rolled into the <asm/pci.h> header
and the result was simplified.  Both of the latter two headers were
preliminary versions not meant for release before now - oh well.

There is one quirk for our TILEmpower platform, which accidentally
negotiates up to 5GT and needs to be kicked down to 2.5GT.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

10 years agodrivers/net/tile/: on-chip network drivers for the tile architecture
Chris Metcalf [Mon, 1 Nov 2010 21:00:37 +0000]
drivers/net/tile/: on-chip network drivers for the tile architecture

This change adds the first network driver for the tile architecture,
supporting the on-chip XGBE and GBE shims.

The infrastructure is present for the TILE-Gx networking drivers (another
three source files in the new directory) but for now the the actual
tilegx sources are waiting on releasing hardware to initial customers.

Note that arch/tile/include/hv/* are "upstream" headers from the
Tilera hypervisor and will probably benefit less from LKML review.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

10 years agoxen: remove duplicated #include
Huang Weiyi [Sat, 20 Nov 2010 12:05:46 +0000]
xen: remove duplicated #include

Remove duplicated #include('s) in
  arch/x86/xen/setup.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

10 years agoxen: x86/32: perform initial startup on initial_page_table
Ian Campbell [Wed, 24 Nov 2010 12:09:41 +0000]
xen: x86/32: perform initial startup on initial_page_table

Only make swapper_pg_dir readonly and pinned when generic x86 architecture code
(which also starts on initial_page_table) switches to it.  This helps ensure
that the generic setup paths work on Xen unmodified. In particular
clone_pgd_range writes directly to the destination pgd entries and is used to
initialise swapper_pg_dir so we need to ensure that it remains writeable until
the last possible moment during bring up.

This is complicated slightly by the need to avoid sharing kernel PMD entries
when running under Xen, therefore the Xen implementation must make a copy of
the kernel PMD (which is otherwise referred to by both intial_page_table and
swapper_pg_dir) before switching to swapper_pg_dir.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

10 years agoMerge branch 'rmobile/fsi-despair' into rmobile-fixes-for-linus
Paul Mundt [Wed, 24 Nov 2010 07:21:08 +0000]
Merge branch 'rmobile/fsi-despair' into rmobile-fixes-for-linus

10 years agosisfb: delete osdef.h
Aaro Koskinen [Fri, 19 Nov 2010 21:58:51 +0000]
sisfb: delete osdef.h

The file is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosisfb: move the CONFIG warning to sis_main.c
Aaro Koskinen [Fri, 19 Nov 2010 21:58:50 +0000]
sisfb: move the CONFIG warning to sis_main.c

sis_main.c is always compiled, so we can check Kconfig options there.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosisfb: replace SiS_SetMemory with memset_io
Aaro Koskinen [Fri, 19 Nov 2010 21:58:49 +0000]
sisfb: replace SiS_SetMemory with memset_io

Get rid of one more wrapper.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosisfb: remove InPort/OutPort wrappers
Aaro Koskinen [Fri, 19 Nov 2010 21:58:48 +0000]
sisfb: remove InPort/OutPort wrappers

Remove register IO wrappers.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosisfb: use CONFIG_FB_SIS_301/315 instead of SIS301/315H
Aaro Koskinen [Fri, 19 Nov 2010 21:58:47 +0000]
sisfb: use CONFIG_FB_SIS_301/315 instead of SIS301/315H

There is no need to alias CONFIG #defines.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosisfb: delete redudant #define SIS_LINUX_KERNEL
Aaro Koskinen [Fri, 19 Nov 2010 21:58:46 +0000]
sisfb: delete redudant #define SIS_LINUX_KERNEL

It's not needed anymore with SIS_XORG_XF86 gone.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosisfb: delete dead SIS_XORG_XF86 code
Aaro Koskinen [Fri, 19 Nov 2010 21:58:45 +0000]
sisfb: delete dead SIS_XORG_XF86 code

Delete code for compiling the driver for X.org/XFree86. The development
has forked, so there is no point keeping this code in the tree.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosisfb: delete fallback code for pci_map_rom()
Aaro Koskinen [Fri, 19 Nov 2010 21:58:44 +0000]
sisfb: delete fallback code for pci_map_rom()

If pci_map_rom() fails, there is some fallback code that basically
duplicates pci_map_rom() on non-x86 platforms. No point in that.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosisfb: delete obsolete PCI ROM bug workaround
Aaro Koskinen [Fri, 19 Nov 2010 21:58:43 +0000]
sisfb: delete obsolete PCI ROM bug workaround

Delete a workaround for a PCI ROM bug that has been fixed ages ago by
the commit 761a3ac08c63718dacde12aaf0ec6d6760e8c2b7.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoARM: mach-shmobile: clock-sh7372: remove bogus pllc2 clock toggling.
Kuninori Morimoto [Fri, 19 Nov 2010 07:23:52 +0000]
ARM: mach-shmobile: clock-sh7372: remove bogus pllc2 clock toggling.

The PLLC2 clock was utilizing the same sort of enable/disable without
regard to usecount approach that the FSIDIV clock was when being used as
a PLL pass-through. This forces the enable/disable through the clock
framework, which now prevents the clock from being ripped out or modified
underneath users that have an existing handle on it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoARM: mach-shmobile: clock-sh7372: remove unnecessary fsi clocks
Kuninori Morimoto [Fri, 19 Nov 2010 07:23:32 +0000]
ARM: mach-shmobile: clock-sh7372: remove unnecessary fsi clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoARM: mach-shmobile: clock-sh7372: modify error code
Kuninori Morimoto [Fri, 19 Nov 2010 07:23:26 +0000]
ARM: mach-shmobile: clock-sh7372: modify error code

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642
Kuninori Morimoto [Fri, 19 Nov 2010 07:23:17 +0000]
ARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642

Current AP4 FSI didn't use set_rate for ak4642,
and used dummy rate when init.
And FSI driver was modified to always call set_rate.

The user which are using FSI set_rate is only AP4 now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI
Kuninori Morimoto [Wed, 24 Nov 2010 02:44:06 +0000]
ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI

Current AP4 FSI set_rate function used bogus clock process
which didn't care enable/disable and clk->usecound.
To solve this issue, this patch also modify FSI driver to call
set_rate with enough options.
This patch modify it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoARM: mach-shmobile: clock-sh7372: remove fsidiv bogus disable
Kuninori Morimoto [Fri, 19 Nov 2010 07:22:58 +0000]
ARM: mach-shmobile: clock-sh7372: remove fsidiv bogus disable

Current FSIDIV clock framework had bogus disable.
This patch remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agomd: Call blk_queue_flush() to establish flush/fua support
Darrick J. Wong [Wed, 24 Nov 2010 05:40:33 +0000]
md: Call blk_queue_flush() to establish flush/fua support

Before 2.6.37, the md layer had a mechanism for catching I/Os with the
barrier flag set, and translating the barrier into barriers for all
the underlying devices.  With 2.6.37, I/O barriers have become plain
old flushes, and the md code was updated to reflect this.  However,
one piece was left out -- the md layer does not tell the block layer
that it supports flushes or FUA access at all, which results in md
silently dropping flush requests.

Since the support already seems there, just add this one piece of
bookkeeping.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.de>

10 years agomd/raid1: really fix recovery looping when single good device fails.
NeilBrown [Wed, 24 Nov 2010 05:39:46 +0000]
md/raid1: really fix recovery looping when single good device fails.

Commit 4044ba58dd15cb01797c4fd034f39ef4a75f7cc3 supposedly fixed a
problem where if a raid1 with just one good device gets a read-error
during recovery, the recovery would abort and immediately restart in
an infinite loop.

However it depended on raid1_remove_disk removing the spare device
from the array.  But that does not happen in this case.  So add a test
so that in the 'recovery_disabled' case, the device will be removed.

This suitable for any kernel since 2.6.29 which is when
recovery_disabled was introduced.

Cc: stable@kernel.org
Reported-by: Sebastian Färber <faerber@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

10 years agomd: fix return value of rdev_size_change()
Justin Maggard [Wed, 24 Nov 2010 05:36:17 +0000]
md: fix return value of rdev_size_change()

When trying to grow an array by enlarging component devices,
rdev_size_store() expects the return value of rdev_size_change() to be
in sectors, but the actual value is returned in KBs.

This functionality was broken by commit
     dd8ac336c13fd8afdb082ebacb1cddd5cf727889
so this patch is suitable for any kernel since 2.6.30.

Cc: stable@kernel.org
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

10 years agovirtio: fix format of sysfs driver/vendor files
Stephen Hemminger [Wed, 10 Nov 2010 06:20:29 +0000]
virtio: fix format of sysfs driver/vendor files

The sysfs files for virtio produce the wrong format and are missing
the required newline. The output for virtio bus vendor/device should
have the same format as the corresponding entries for PCI devices.

Although this technically changes the ABI for sysfs, these files were
broken to start with!

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

10 years agoChar: virtio_console, fix memory leak
Jiri Slaby [Sat, 6 Nov 2010 09:06:50 +0000]
Char: virtio_console, fix memory leak

Stanse found that in init_vqs, memory is leaked under certain
circumstanses (the fail path order is incorrect). Fix that by checking
allocations in one turn and free all of them at once if some fails
(some may be NULL, but this is OK).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

10 years agovirtio: return correct capacity to users
Michael S. Tsirkin [Thu, 4 Nov 2010 12:24:24 +0000]
virtio: return correct capacity to users

We can't rely on indirect buffers for capacity
calculations because they need a memory allocation
which might fail.  In particular, virtio_net can get
into this situation under stress, and it drops packets
and performs badly.

So return the number of buffers we can guarantee users.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-By: Krishna Kumar2 <krkumar2@in.ibm.com>

10 years agomodule: Update prototype for ref_module (formerly use_module)
Anders Kaseorg [Wed, 24 Nov 2010 21:21:10 +0000]
module: Update prototype for ref_module (formerly use_module)

Commit 9bea7f23952d5948f8e5dfdff4de09bb9981fb5f renamed use_module to
ref_module (and changed its return value), but forgot to update this
prototype in module.h.

Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

10 years agonilfs2: fix typo in comment of nilfs_dat_move function
Ryusuke Konishi [Tue, 23 Nov 2010 17:18:59 +0000]
nilfs2: fix typo in comment of nilfs_dat_move function

Fixes a typo: "uncommited" -> "uncommitted".

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Tue, 23 Nov 2010 23:23:56 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (41 commits)
  ALSA: hda - Identify more variants for ALC269
  ALSA: hda - Fix wrong ALC269 variant check
  ALSA: hda - Enable jack sense for Thinkpad Edge 11
  ALSA: Revert "ALSA: hda - Fix switching between dmic and mic using the same mux on IDT/STAC"
  ALSA: hda - Fixed ALC887-VD initial error
  ALSA: atmel - Fix the return value in error path
  ALSA: hda: Use hp-laptop quirk to enable headphones automute for Asus A52J
  ALSA: snd-atmel-abdac: test wrong variable
  ALSA: azt3328: period bug fix (for PA), add missing ACK on stop timer
  ALSA: hda: Add Samsung R720 SSID for subwoofer pin fixup
  ALSA: sound/pci/asihpi/hpioctl.c: Remove unnecessary casts of pci_get_drvdata
  ALSA: sound/core/pcm_lib.c: Remove unnecessary semicolons
  ALSA: sound/ppc: Use printf extension %pR for struct resource
  ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone controls
  ASoC: uda134x - set reg_cache_default to uda134x_reg
  ASoC: Add support for MAX98089 CODEC
  ASoC: davinci: fixes for multi-component
  ASoC: Fix register cache setup WM8994 for multi-component
  ASoC: Fix dapm_seq_compare() for multi-component
  ASoC: RX1950: Fix hw_params function
  ...

10 years agoMerge branch 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 23 Nov 2010 23:23:18 +0000]
Merge branch 'upstream/for-linus' of git://git./linux/kernel/git/jeremy/xen

* 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits)
  xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
  xen: set IO permission early (before early_cpu_init())
  xen: re-enable boot-time ballooning
  xen/balloon: make sure we only include remaining extra ram
  xen/balloon: the balloon_lock is useless
  xen: add extra pages to balloon
  xen: make evtchn's name less generic
  xen/evtchn: the evtchn device is non-seekable
  Revert "xen/privcmd: create address space to allow writable mmaps"
  xen/events: use locked set|clear_bit() for cpu_evtchn_mask
  xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
  xen/xenfs: update xenfs_mount for new prototype
  xen: fix header export to userspace
  xen: implement XENMEM_machphys_mapping
  xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
  xen: xenfs: privcmd: check put_user() return code
  xen/evtchn: add missing static
  xen/evtchn: Fix name of Xen event-channel device
  xen/evtchn: don't do unbind_from_irqhandler under spinlock
  xen/evtchn: remove spurious barrier
  ...

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 23 Nov 2010 23:22:34 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  of/phylib: Use device tree properties to initialize Marvell PHYs.
  phylib: Add support for Marvell 88E1149R devices.
  phylib: Use common page register definition for Marvell PHYs.
  qlge: Fix incorrect usage of module parameters and netdev msg level
  ipv6: fix missing in6_ifa_put in addrconf
  SuperH IrDA: correct Baud rate error correction
  atl1c: Fix hardware type check for enabling OTP CLK
  net: allow GFP_HIGHMEM in __vmalloc()
  bonding: change list contact to netdev@vger.kernel.org
  e1000: fix screaming IRQ

10 years agoMerge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Tue, 23 Nov 2010 23:21:43 +0000]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: EHCI: fix obscure race in ehci_endpoint_disable
  USB: gadget: AT91: fix typo in atmel_usba_udc driver
  USB: isp1362-hcd - fix section mismatch warning
  USB: EHCI: AMD periodic frame list table quirk
  USB: OTG: langwell_otg: fix up some sysfs attribute permissions
  USB: misc: usbsevseg: fix up some sysfs attribute permissions
  USB: misc: usbled: fix up some sysfs attribute permissions
  USB: misc: trancevibrator: fix up a sysfs attribute permission
  USB: misc: cypress_cy7c63: fix up some sysfs attribute permissions
  USB: storage: sierra_ms: fix sysfs file attribute
  USB: ehci: fix debugfs 'lpm' permissions
  USB: atm: ueagle-atm: fix up some permissions on the sysfs files
  xhci: Fix command ring replay after resume.
  xHCI: fix wMaxPacketSize mask
  xHCI: release spinlock when setup interrupt
  xhci: Remove excessive printks with shared IRQs.

10 years agoARM: 6490/1: MM: bugfix: initialize spinlock for init_mm.context
MyungJoo Ham [Tue, 23 Nov 2010 10:39:23 +0000]
ARM: 6490/1: MM: bugfix: initialize spinlock for init_mm.context

init_mm used at kernel/sched.c:idle_task_exit() has spin_lock
(init_mm.context.id_lock) that is not initialized when spin_lock/unlock
is called at an ARM machine. Note that mm_struct.context.id_lock is
usually initialized except for the instance of init_mm at
linux/arch/arm/mm/context.c

Not initializing this spinlock incurs "BUG: pinlock bad magic"
warning when spinlock debug is enabled. We have observed such
instances when testing PM in S5PC210 machines.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: avoid annoying <4>'s in printk output
Russell King [Tue, 23 Nov 2010 22:27:55 +0000]
ARM: avoid annoying <4>'s in printk output

Adding KERN_WARNING in the middle of strings now produces those tokens
in the output, rather than accepting the level as was once the case.
Fix this in the one reported case.  There might be more...

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoSCSI: arm fas216: fix missing ';'
Russell King [Tue, 23 Nov 2010 22:19:08 +0000]
SCSI: arm fas216: fix missing ';'

f281233 (SCSI host lock push-down) broke the fas216 build:

drivers/scsi/arm/fas216.h: In function 'fas216_noqueue_command':
drivers/scsi/arm/fas216.h:354: error: storage class specified for parameter 'fas216_intr'
drivers/scsi/arm/fas216.h:356: error: storage class specified for parameter 'fas216_remove'
...

Fix it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoperf symbols: Remove incorrect open-coded container_of()
Rabin Vincent [Tue, 23 Nov 2010 16:38:18 +0000]
perf symbols: Remove incorrect open-coded container_of()

At least on ARM, padding is inserted between rb_node and sym in struct
symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to
point inside rb_node rather than to the symbol_name_rb_node.  Fix this
by converting the code to use container_of().

Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101123163106.GA25677@debian>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>