15 years ago[PATCH] rename wakeup_bdflush to wakeup_pdflush
Pekka J Enberg [Wed, 29 Jun 2005 03:44:55 +0000]
[PATCH] rename wakeup_bdflush to wakeup_pdflush

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] swabb.h warning fixes
Andrew Morton [Wed, 29 Jun 2005 03:44:54 +0000]
[PATCH] swabb.h warning fixes

In file included from drivers/media/dvb/ttpci/av7110_hw.c:38:
include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type
include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type
In file included from drivers/media/dvb/ttpci/av7110_v4l.c:36:
include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type
include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type
In file included from drivers/media/dvb/ttpci/av7110_av.c:37:
include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type
include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type
drivers/isdn/icn/icn.c:719:4: warning: #warning TODO test headroom or use skb->nb to flag ACK
In file included from drivers/media/dvb/ttpci/av7110_ca.c:39:
include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type
include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type
In file included from drivers/media/dvb/ttpci/av7110.c:41:
include/linux/byteorder/swabb.h:96: warning: type qualifiers ignored on function return type
include/linux/byteorder/swabb.h:110: warning: type qualifiers ignored on function return type

Does declaring a function to return a const value actually mean something to
gcc?

Dunno.  Kill it and replace sone `__inline__'s with `inline' too.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] hisax warning fixes
Andrew Morton [Wed, 29 Jun 2005 03:44:53 +0000]
[PATCH] hisax warning fixes

drivers/isdn/hisax/hfc4s8s_l1.c:317: warning: type qualifiers ignored on function return type
drivers/isdn/hisax/hfc4s8s_l1.c:329: warning: type qualifiers ignored on function return type

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] request_firmware(): avoid race conditions
Stanislaw W. Gruszka [Wed, 29 Jun 2005 03:44:51 +0000]
[PATCH] request_firmware(): avoid race conditions

Avoid race occurs when some process have open file descriptor for class
device attributes and already firmware allocated memory are freed.  Don't
allow negative loading timeout.

Signed-off-by: Stanislaw W. Gruszka <stf_xl@wp.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Adapt drivers/char/vt_ioctl.c to non-x86
Emmanuel Colbus [Wed, 29 Jun 2005 03:44:49 +0000]
[PATCH] Adapt drivers/char/vt_ioctl.c to non-x86

This code uses the x86 (non-AMD-ELAN) value of CLOCK_TICK_RATE instead of
CLOCK_TICK_RATE itself, which is wrong for other archs.

Signed-off-by: Emmanuel Colbus <emmanuel.colbus@ensimag.imag.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ITIMER_REAL: fix possible deadlock and race
Oleg Nesterov [Wed, 29 Jun 2005 03:44:47 +0000]
[PATCH] ITIMER_REAL: fix possible deadlock and race

As Steven Rostedt pointed out, there are 2 problems with ITIMER_REAL
timers.

1. do_setitimer() does not call del_timer_sync() in case
   when the timer is not pending (it_real_value() returns 0).
   This is wrong, the timer may still be running, and it can
   rearm itself.

2. It calls del_timer_sync() with tsk->sighand->siglock held.
   This is deadlockable, because timer's handler needs this
   lock too.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ixp4xx/ixp2000 watchdog driver typo
Lennert Buytenhek [Wed, 29 Jun 2005 03:44:46 +0000]
[PATCH] ixp4xx/ixp2000 watchdog driver typo

Fix the same typo in the ixp4xx and ixp2000 watchdog drivers.

Signed-off-by: Lennert Buytenhek <buytenh+lkml@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] drivers/char/tipar.c: off by one array access
Luc Van Oostenryck [Wed, 29 Jun 2005 03:44:44 +0000]
[PATCH] drivers/char/tipar.c: off by one array access

In the setup function, the delay variable is initialized with ints[2],
but ints is declared as:
int ints[2];

Since the module parameter should correspond to:
tipar=timeout,delay

I suppose that the following patch fix the problem.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@looxix.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Using msleep() instead of HZ
Luca Falavigna [Wed, 29 Jun 2005 03:44:42 +0000]
[PATCH] Using msleep() instead of HZ

Use msleep() in a few places.

Signed-off-by: Luca Falavigna <dktrkranz@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] fix semaphore handling in __unregister_chrdev_region
Wen-chien Jesse Sung [Wed, 29 Jun 2005 03:44:41 +0000]
[PATCH] fix semaphore handling in __unregister_chrdev_region

This up() should be down() instead.

Signed-off-by: Wen-chien Jesse Sung <jesse@cola.voip.idv.tw>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 28 Jun 2005 22:00:08 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

15 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Tue, 28 Jun 2005 21:59:07 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

15 years ago[PATCH] Tweak idle thread setup semantics
Ingo Molnar [Tue, 28 Jun 2005 14:40:42 +0000]
[PATCH] Tweak idle thread setup semantics

This patch tweaks idle thread setup semantics a bit: instead of setting
NEED_RESCHED in init_idle(), we do an explicit schedule() before calling
into cpu_idle().

This patch, while having no negative side-effects, enables wider use of
cond_resched()s.  (which might happen in the stock kernel too, but it's
particulary important for voluntary-preempt)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ll_rw_blk: prevent huge request allocations
Jens Axboe [Tue, 28 Jun 2005 14:35:11 +0000]
[PATCH] ll_rw_blk: prevent huge request allocations

Currently we cap request allocations at q->nr_requests, but we allow a
batching io context to allocate up to 32 more (default setting).  This
can flood the queue with request allocations, with only a few batching
processes.  The real fix would be to limit the number of batchers, but
as that isn't currently tracked, I suggest we just cap the maximum
number of allocated requests to eg 50% over the limit.

This was observed in real life, users typically see this as vmstat bo
numbers going off the wall with seconds of no queueing afterwards.
Behaviour this bursty is not beneficial.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] md: bio leak fix
Neil Brown [Tue, 28 Jun 2005 05:29:34 +0000]
[PATCH] md: bio leak fix

insert a missing bio_put when writting the md superblock.

Without this we have a steady growth in the "bio" slab.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] kexec: fix sparse warnings
Alexey Dobriyan [Tue, 28 Jun 2005 05:29:33 +0000]
[PATCH] kexec: fix sparse warnings

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] cciss_ioctl() warning fix
Andrew Morton [Tue, 28 Jun 2005 05:29:31 +0000]
[PATCH] cciss_ioctl() warning fix

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ARM: 2763/1: S3C24XX - mark IRQ_LCD as valid
Ben Dooks [Tue, 28 Jun 2005 21:42:06 +0000]
[PATCH] ARM: 2763/1: S3C24XX - mark IRQ_LCD as valid

Patch from Ben Dooks

Fix the IRQ_LCD so that it is marked as valid
since we no longer de-mux this in the main IRQ
handler.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2760/1: Add a warning on dynamic tick timekeeping on some platforms
Tony Lindgren [Tue, 28 Jun 2005 20:01:16 +0000]
[PATCH] ARM: 2760/1: Add a warning on dynamic tick timekeeping on some platforms

Patch from Tony Lindgren

This patch was suggested by RMK, and adds a warning on the accuracy
of timekeeping when using dynamic tick on some platforms. Depending
on the timer implementation, dynamic tick may affect the accuracy of
timekeeping.
Currently at least OMAP is known to have accurate timekeeping with
dynamic tick.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2762/1: S3C24XX Audio platform data
Ben Dooks [Tue, 28 Jun 2005 20:01:03 +0000]
[PATCH] ARM: 2762/1: S3C24XX Audio platform data

Patch from Ben Dooks

This provides the s3c24xx audio platform data which can be
supplied from any of the board specific drivers.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2761/1: OProfile: Add call graphing support for arm
Richard Purdie [Tue, 28 Jun 2005 20:01:03 +0000]
[PATCH] ARM: 2761/1: OProfile: Add call graphing support for arm

Patch from Richard Purdie

Add functions to generate backtraces of both kernel and user processes
which allows oprofile's call graphing functionality to be used on arm.
This requires unstripped binaries/libs which use a frame pointer.

Signed-off-by: Richard Purdie
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years agoMerge head 'upstream-20050628-1' of rsync://rsync.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 28 Jun 2005 17:20:11 +0000]
Merge head 'upstream-20050628-1' of /linux/kernel/git/jgarzik/libata-dev

15 years agoMerge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Greg KH [Tue, 28 Jun 2005 05:07:56 +0000]
Merge /pub/scm/linux/kernel/git/torvalds/linux-2.6

15 years ago[PATCH] PCI: use the MCFG table to properly access pci devices (x86-64)
Greg Kroah-Hartman [Fri, 24 Jun 2005 00:35:56 +0000]
[PATCH] PCI: use the MCFG table to properly access pci devices (x86-64)

Now that we have access to the whole MCFG table, let's properly use it
for all pci device accesses (as that's what it is there for, some boxes
don't put all the busses into one entry.)

If, for some reason, the table is incorrect, we fallback to the "old
style" of mmconfig accesses, namely, we just assume the first entry in
the table is the one for us, and blindly use it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI: use the MCFG table to properly access pci devices (i386)
Greg Kroah-Hartman [Fri, 24 Jun 2005 00:35:56 +0000]
[PATCH] PCI: use the MCFG table to properly access pci devices (i386)

Now that we have access to the whole MCFG table, let's properly use it
for all pci device accesses (as that's what it is there for, some boxes
don't put all the busses into one entry.)

If, for some reason, the table is incorrect, we fallback to the "old
style" of mmconfig accesses, namely, we just assume the first entry in
the table is the one for us, and blindly use it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI: add proper MCFG table parsing to ACPI core.
Greg Kroah-Hartman [Fri, 24 Jun 2005 00:35:56 +0000]
[PATCH] PCI: add proper MCFG table parsing to ACPI core.

This patch is the first step in properly handling the MCFG PCI table.
It defines the structures properly, and saves off the table so that the
pci mmconfig code can access it.  It moves the parsing of the table a
little later in the boot process, but still before the information is
needed.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI: make drivers use the pci shutdown callback instead of the driver core...
Greg Kroah-Hartman [Fri, 24 Jun 2005 00:35:56 +0000]
[PATCH] PCI: make drivers use the pci shutdown callback instead of the driver core callback.

Now we can change the pci core to always set this pointer, as pci drivers
should use it, not the driver core callback.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] cpqphp: fix oops during unload without probe
Keith Moore [Thu, 2 Jun 2005 10:42:37 +0000]
[PATCH] cpqphp: fix oops during unload without probe

drivers/pci/hotplug/cpqphp_core.c calls cpqphp_event_start_thread()
in one_time_init(), which is called whenever the hardware is probed.
Unfortunately, cpqphp_event_stop_thread() is *always* called when
the module is unloaded. If the hardware is never probed, then
cpqphp_event_stop_thread() tries to manipulate a couple of
uninitialized mutexes.

Signed-off-by: Keith Moore <keithmo@exmsft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI: clean up the MSI code a bit.
Greg Kroah-Hartman [Tue, 7 Jun 2005 06:07:46 +0000]
[PATCH] PCI: clean up the MSI code a bit.

Mostly just cleans up the irq handling logic to be smaller and a bit more
descriptive as to what it really does.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI: fix up errors after dma bursting patch and CONFIG_PCI=n
Andrew Morton [Tue, 7 Jun 2005 06:07:46 +0000]
[PATCH] PCI: fix up errors after dma bursting patch and CONFIG_PCI=n

With CONFIG_PCI=n:

In file included from include/linux/pci.h:917,
                 from lib/iomap.c:6:
include/asm/pci.h:104: warning: `enum pci_dma_burst_strategy' declared inside parameter list
include/asm/pci.h:104: warning: its scope is only this definition or declaration, which is probably not what you want.
include/asm/pci.h: In function `pci_dma_burst_advice':
include/asm/pci.h:106: dereferencing pointer to incomplete type
include/asm/pci.h:106: `PCI_DMA_BURST_INFINITY' undeclared (first use in this function)
include/asm/pci.h:106: (Each undeclared identifier is reported only once
include/asm/pci.h:106: for each function it appears in.)
make[1]: *** [lib/iomap.o] Error 1

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI: DMA bursting advice
David S. Miller [Thu, 2 Jun 2005 19:55:50 +0000]
[PATCH] PCI: DMA bursting advice

After seeing, at best, "guesses" as to the following kind
of information in several drivers, I decided that we really
need a way for platforms to specifically give advice in this
area for what works best with their PCI controller implementation.

Basically, this new interface gives DMA bursting advice on
PCI.  There are three forms of the advice:

1) Burst as much as possible, it is not necessary to end bursts
   on some particular boundary for best performance.

2) Burst on some byte count multiple.  A DMA burst to some multiple of
   number of bytes may be done, but it is important to end the burst
   on an exact multiple for best performance.

   The best example of this I am aware of are the PPC64 PCI
   controllers, where if you end a burst mid-cacheline then
   chip has to refetch the data and the IOMMU translations
   which hurts performance a lot.

3) Burst on a single byte count multiple.  Bursts shall end
   exactly on the next multiple boundary for best performance.

   Sparc64 and Alpha's PCI controllers operate this way.  They
   disconnect any device which tries to burst across a cacheline
   boundary.

   Actually, newer sparc64 PCI controllers do not have this behavior.
   That is why the "pdev" is passed into the interface, so I can
   add code later to check which PCI controller the system is using
   and give advice accordingly.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patch
Michael Ellerman [Fri, 13 May 2005 07:44:10 +0000]
[PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patch

This is an updated version of Ben's fix-pci-mmap-on-ppc-and-ppc64.patch
which is in 2.6.12-rc4-mm1.

It fixes the patch to work on PPC iSeries, removes some debug printks
at Ben's request, and incorporates your
fix-pci-mmap-on-ppc-and-ppc64-fix.patch also.

Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch was discussed at length on linux-pci and so far, the last
iteration of it didn't raise any comment.  It's effect is a nop on
architecture that don't define the new pci_resource_to_user() callback
anyway.  It allows architecture like ppc who put weird things inside of
PCI resource structures to convert to some different value for user
visible ones.  It also fixes mmap'ing of IO space on those archs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] ACPI based I/O APIC hot-plug: acpiphp support
Kenji Kaneshige [Thu, 28 Apr 2005 07:25:59 +0000]
[PATCH] ACPI based I/O APIC hot-plug: acpiphp support

This patch adds PCI based I/O xAPIC hot-add support to ACPIPHP
driver. When PCI root bridge is hot-added, all PCI based I/O xAPICs
under the root bridge are hot-added by this patch. Hot-remove support
is TBD.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] ACPI based I/O APIC hot-plug: ia64 support
Kenji Kaneshige [Thu, 28 Apr 2005 07:25:58 +0000]
[PATCH] ACPI based I/O APIC hot-plug: ia64 support

This is an ia64 implementation of acpi_register_ioapic() and
acpi_unregister_ioapic() interfaces.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] ACPI based I/O APIC hot-plug: add interfaces
Kenji Kaneshige [Thu, 28 Apr 2005 07:25:58 +0000]
[PATCH] ACPI based I/O APIC hot-plug: add interfaces

This patch adds the following new interfaces for I/O xAPIC
hotplug. The implementation of these interfaces depends on each
architecture.

    o int acpi_register_ioapic(acpi_handle handle, u64 phys_addr,
       u32 gsi_base);

        This new interface is to add a new I/O xAPIC specified by
        phys_addr and gsi_base pair. phys_addr is the physical address
        to which the I/O xAPIC is mapped and gsi_base is global system
        interrupt base of the I/O xAPIC. acpi_register_ioapic returns
        0 on success, or negative value on error.

    o int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);

        This new interface is to remove a I/O xAPIC specified by
        gsi_base. acpi_unregister_ioapic returns 0 on success, or
        negative value on error.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi hotplug: decouple slot power state changes from physical hotplug
Rajesh Shah [Thu, 28 Apr 2005 07:25:57 +0000]
[PATCH] acpi hotplug: decouple slot power state changes from physical hotplug

Current acpiphp code does not distinguish between the physical presence and
power state of a device/slot.  That is, if a device has to be disabled, it
also tries to physically ejects the device.  This patch decouples power state
from physical presence.  You can now echo to the corresponding sysfs power
control file to repeatedly enable and disable a device without having to
physically re-insert it.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi hotplug: aCPI based root bridge hot-add
Rajesh Shah [Thu, 28 Apr 2005 07:25:56 +0000]
[PATCH] acpi hotplug: aCPI based root bridge hot-add

acpiphp changes to support acpi based root bridge hot-add.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi hotplug: fix slot power-down problem with acpiphp
Rajesh Shah [Thu, 28 Apr 2005 07:25:55 +0000]
[PATCH] acpi hotplug: fix slot power-down problem with acpiphp

Earlier I reported that Matthew's acpiphp rewrite had problem in powering down
slot on my i386 system.  The following patch is needed to get the acpiphp
rewrite properly powering down the slot.

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi hotplug: clean up notify handlers on acpiphp unload
Rajesh Shah [Thu, 28 Apr 2005 07:25:54 +0000]
[PATCH] acpi hotplug: clean up notify handlers on acpiphp unload

A root bridge may not have directly attached hotpluggable slots under it.
Instead, it may have p2p bridges with slots under it.  In this case, we need
to clean up the p2p bridges and slots properly too.  Patch below applies on
top of the original patch, and fixes this problem.  Without this, acpiphp
leaves behind notify handlers on module unload, and subsequent module load
attempts don't work properly too.  Patch was tested on an ia64 Tiger4 box.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi hotplug: convert acpiphp to use generic resource code
Rajesh Shah [Thu, 28 Apr 2005 07:25:53 +0000]
[PATCH] acpi hotplug: convert acpiphp to use generic resource code

This patch converts acpiphp to use the generic PCI resource assignment code.
It's quite large, but most of it is deleting the acpiphp_pci and acpiphp_res
files.  It's tested on an hp Integrity rx8620 (which won't work without this
patch).  Testers with other hardware welcomed.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle
Rajesh Shah [Thu, 28 Apr 2005 07:25:53 +0000]
[PATCH] acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle

Export an acpi interface to get PCI domain/bus/devfn information from the
corresponding namespace handle.  Used by acpiphp code to transpate the device
handle of the hot-plugged root bridge to the corresponding pci location
information.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Allow ACPI .add and .start operations to be done independ...
Rajesh Shah [Thu, 28 Apr 2005 07:25:52 +0000]
[PATCH] acpi bridge hotadd: Allow ACPI .add and .start operations to be done independently

Create new interfaces to recursively add an acpi namespace object to the acpi
device list, and recursively start the namespace object.  This is needed for
ACPI based hotplug of a root bridge hierarchy where the add operation must be
performed first and the start operation must be performed separately after the
hot-plugged devices have been properly configured.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Read bridge resources when fixing up the bus
Rajesh Shah [Thu, 28 Apr 2005 07:25:51 +0000]
[PATCH] acpi bridge hotadd: Read bridge resources when fixing up the bus

Read bridge io/mem/pfmem ranges when fixing up the bus so that bus resources
are tracked.  This is required to properly support pci end device and bridge
hotplug.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Remove hot-plugged devices that could not be allocated...
Rajesh Shah [Thu, 28 Apr 2005 07:25:50 +0000]
[PATCH] acpi bridge hotadd: Remove hot-plugged devices that could not be allocated resources

When hot-plugging an I/O hierarchy that contains many bridges and leaf
devices, it's possible that there are not enough resources to start all the
device present.  If we fail to assign a resource, clear the corresponding
value in the pci_dev structure, so other code can take corrective action.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug
Rajesh Shah [Thu, 28 Apr 2005 07:25:49 +0000]
[PATCH] acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug

When a root bridge hierarchy is hot-plugged, resource requirements for the new
devices may be greater than what the root bridge is decoding.  In this case,
we want to remove devices that did not get needed resources.  These devices
have been scanned into bus specific lists but not yet added to the global
device list.  Make sure the pci remove functions can handle this case.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Link newly created pci child bus to its parent on creation
Rajesh Shah [Thu, 28 Apr 2005 07:25:49 +0000]
[PATCH] acpi bridge hotadd: Link newly created pci child bus to its parent on creation

When a pci child bus is created, add it to the parent's children list
immediately rather than waiting till pci_bus_add_devices().  For hot-plug
bridges/devices, pci_bus_add_devices() may be called much later, after they
have been properly configured.  In the meantime, this allows us to use the
normal pci bus search functions for the hot-plug bridges/buses.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists
Rajesh Shah [Thu, 28 Apr 2005 07:25:48 +0000]
[PATCH] acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists

With root bridge and pci bridge hot-plug, new buses and devices can be added
or removed at run time.  Protect the pci bus and device lists with the pci
lock when doing so.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge
Rajesh Shah [Thu, 28 Apr 2005 07:25:47 +0000]
[PATCH] acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge

When hot-plugging a root bridge, as we try to assign bus numbers we may find
that the hotplugged hieratchy has more PCI to PCI bridges (i.e.  bus
requirements) than available.  Make sure we don't step over an existing bus
when that happens.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe
Rajesh Shah [Thu, 28 Apr 2005 07:25:46 +0000]
[PATCH] acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe

PCI scan code calls the arch specific pcibios_fixup_bus() each time it scans a
new bridge.  For root bridge hot-plug, the bridge and it's attached devices
may not have been configured properly yet, so it's not safe to claim those
resources at this time.

This code goes away when we clean up the way pci resources are claimed (in
pci_enable_device()), so this is only a stopgap fix.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: Fix pci_enable_device() for p2p bridges
Rajesh Shah [Thu, 28 Apr 2005 07:25:45 +0000]
[PATCH] acpi bridge hotadd: Fix pci_enable_device() for p2p bridges

When checking if a PCI to PCI bridge should be enabled to decode memory and/or
IO resources, we need to look at all device resources not just the first 6.
This is needed to allow PCI bridges to pass down memory and IO accesses to
child devices even when the bridge itself does not consume resources in its
PCI BARs.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] acpi bridge hotadd: ACPI based root bridge hot-add
Rajesh Shah [Thu, 28 Apr 2005 07:25:45 +0000]
[PATCH] acpi bridge hotadd: ACPI based root bridge hot-add

When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and
devices attached to it that have not been configured by firmware.  In this
case, we need to configure the devices before starting them.  This patch
separates device start from device scan so that we can introduce the
configuration step in the middle.

I kept the existing semantics for pci_scan_bus() since there are a huge number
of callers to that function.

Also, I have no way of testing the changes I made to the parisc files, so this
needs review by those folks.  Sorry for the massive cross-post, this touches
files in many different places.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] pci: remove deprecates
Amit Gud [Tue, 12 Apr 2005 13:34:27 +0000]
[PATCH] pci: remove deprecates

Replace pci_find_device() with more safer pci_get_device().

Signed-off-by: Amit Gud <gud@eth.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] pci: remove deprecates
Amit Gud [Tue, 12 Apr 2005 13:33:33 +0000]
[PATCH] pci: remove deprecates

Replace pci_find_device() with more safer pci_get_device().

Signed-off-by: Amit Gud <gud@eth.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years ago[PATCH] PCI Allow OutOfRange PIRQ table address
jayalk@intworks.biz [Tue, 22 Mar 2005 04:20:42 +0000]
[PATCH] PCI Allow OutOfRange PIRQ table address

I updated this to remove unnecessary variable initialization, make
check_routing be inline only and not __init, switch to strtoul, and
formatting fixes as per Randy Dunlap's recommendations.

I updated this to change pirq_table_addr to a long, and to add a warning
msg if the PIRQ table wasn't found at the specified address, as per thread
with Matthew Wilcox.

In our hardware situation, the BIOS is unable to store or generate it's PIRQ
table in the F0000h-100000h standard range. This patch adds a pci kernel
parameter, pirqaddr to allow the bootloader (or BIOS based loader) to inform
the kernel where the PIRQ table got stored. A beneficial side-effect is that,
if one's BIOS uses a static address each time for it's PIRQ table, then
pirqaddr can be used to avoid the $pirq search through that address block each
time at boot for normal PIRQ BIOSes.

Signed-off-by: Jaya Kumar <jayalk@intworks.biz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

15 years agoMerge /spare/repo/linux-2.6/
Jeff Garzik [Tue, 28 Jun 2005 04:46:22 +0000]
Merge /spare/repo/linux-2.6/

15 years ago[PATCH] libata: ahci: remove ata_port_start/stop() calls
Tejun Heo [Sun, 26 Jun 2005 14:52:50 +0000]
[PATCH] libata: ahci: remove ata_port_start/stop() calls

This patch removes unnecessary ata_port_start/stop() calls from
ahci_port_start/stop().

Signed-off-by: Tejun Heo <htejun@gmail.com>

15 years ago[PATCH] libata: lengthen COMMRESET delay
Tejun Heo [Sun, 26 Jun 2005 14:27:19 +0000]
[PATCH] libata: lengthen COMMRESET delay

This patch lengthens the delay between DET setting and clearing for
COMMRESET from 400us to 1ms.  I couldn't find any requiremen regarding
the duration of COMMRESET in SATA I/II specs but AHCI-1.1 10.4.2
states that it should be at least 1ms.

Signed-off-by: Tejun Heo <htejun@gmail.com>

15 years agolibata: update DMA blacklist
Jeff Garzik [Tue, 28 Jun 2005 04:03:37 +0000]
libata: update DMA blacklist

Contributions from Alan Cox and maximilian attems.

15 years ago[PATCH] cfq build fix
Andrew Morton [Tue, 28 Jun 2005 03:14:05 +0000]
[PATCH] cfq build fix

drivers/block/cfq-iosched.c: In function 'cfq_put_queue':
drivers/block/cfq-iosched.c:303: sorry, unimplemented: inlining failed in call to 'cfq_pending_requests': function body not available
drivers/block/cfq-iosched.c:1080: sorry, unimplemented: called from here
drivers/block/cfq-iosched.c: In function '__cfq_may_queue':
drivers/block/cfq-iosched.c:1955: warning: the address of 'cfq_cfqq_must_alloc_slice', will always evaluate as 'true'
make[1]: *** [drivers/block/cfq-iosched.o] Error 1
make: *** [drivers/block/cfq-iosched.o] Error 2

Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agodrivers/net/at1700: remove incorrect comment
Komuro [Tue, 28 Jun 2005 03:23:05 +0000]
drivers/net/at1700: remove incorrect comment

"Allied Telesis RE1000 Plus" is not supported at all
by kernel 2.6.12.

Signed-off-by: komurojun-mbn@nifty.com

15 years ago[PATCH] Minor libata documentation patch
Edward Falk [Wed, 15 Jun 2005 21:26:39 +0000]
[PATCH] Minor libata documentation patch

I fleshed out libata.tmpl a bit while I was taking notes.

15 years agoMerge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Tue, 28 Jun 2005 03:10:18 +0000]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

15 years ago[PATCH] Use pci_set_dma_mask() instead of direct assignment of DMA mask
Tobias Klauser [Mon, 16 May 2005 17:15:11 +0000]
[PATCH] Use pci_set_dma_mask() instead of direct assignment of DMA mask

The amd8111e driver directly assigns the DMA mask to the dma_mask
member of the struct pci_dev instead of using pci_set_dma_mask(). This
makes the call to pci_dma_supported() redundant as pci_set_dma_mask()
does this check.

I do not own this device so I only compile-tested this patch.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>

15 years ago[PATCH] smc91x needs settable IRQ trigger type
David Brownell [Mon, 16 May 2005 15:53:52 +0000]
[PATCH] smc91x needs settable IRQ trigger type

For boards that invert the SMC91x IRQ line (maybe an FPGA inverts it),
the set_irq_type() call can't assume IRQT_RISING.  These particular
boards currently use OMAP-specific calls to change the trigger type,
but the boards break when set_irq_type() stops being a NOP.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

15 years agoUpdate is_multicast_ether_addr() definition; net/ieee80211.h cleanups.
Jeff Garzik [Tue, 28 Jun 2005 02:47:18 +0000]
Update is_multicast_ether_addr() definition; net/ieee80211.h cleanups.

15 years agoMerge /spare/repo/linux-2.6/
Jeff Garzik [Tue, 28 Jun 2005 02:05:03 +0000]
Merge /spare/repo/linux-2.6/

15 years ago[PATCH] ACPI-based PCI resources: PCMCIA bugfix, but resources missing in trees
Dominik Brodowski [Mon, 27 Jun 2005 23:29:02 +0000]
[PATCH] ACPI-based PCI resources: PCMCIA bugfix, but resources missing in trees

Don't auto-configure yenta sockets for PCMCIA devices if it is connected to
the root PCI bus on the x86 or x86_64 architectures.  Previously, this was
handled by the "ioport_resource"/"iomem_resource" check a few lines below,
but with the new ACPI-based resource handling this doesn't catch all cases
any longer.

pci-yenta-cardbus-fix.patch and this patch should solve the initialization
time trouble.  However, the ACPI-based PCI resource handling is badly
broken, IMHO:

- many resources of devices don't show up in the resource trees (
  /proc/iomem and /proc/ioports) any longer. This means that PCMCIA, but
  also possibly other subsystems (ISA, PnP, ...) do not know which resources
  it cannot use.

- verify_root_windows() should fail if there are no iomem _or_ ioport
  resources, not only if there are no iomem _and_ ioport resources.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: export modalias in sysfs
Dominik Brodowski [Mon, 27 Jun 2005 23:29:01 +0000]
[PATCH] pcmcia: export modalias in sysfs

Provide a "modalias" entry in sysfs for PCMCIA devices.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: 8 and 16 bit access for static_map
Dominik Brodowski [Mon, 27 Jun 2005 23:29:01 +0000]
[PATCH] pcmcia: 8 and 16 bit access for static_map

The PCMCIA card services layer is never setting the i/o map attributes when
SS_CAP_STATIC_MAP is specified.  Net result, sockets' set_io_map() calls
always see requests with most flags clear, meaning 8 bit access.

For hardware that always autosizes, that won't matter; and all current
STATIC_MAP drivers ignore those attributes.  A new driver (for at91rm9200)
suffers badly from this, since this forces everything into 8 bit mode and
that breaks both (a) cards requiring 16 bit access, and (b) ide-cs; but of
course 8-bit cards work OK (as does accessing card attributes).

So this patch arranges to pass the attributes down, matching the behavior
for non-static mappings (using the first/only I/O window).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: properly handle all errors of register_chrdev
Dominik Brodowski [Mon, 27 Jun 2005 23:29:00 +0000]
[PATCH] pcmcia: properly handle all errors of register_chrdev

register_chrdev() can return errors (negative) other then -EBUSY, so check
for any negative error code.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: documentation fix
Jar [Mon, 27 Jun 2005 23:28:58 +0000]
[PATCH] pcmcia: documentation fix

Fix example hash generator in Documentation.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: resource handling fixes
Dominik Brodowski [Mon, 27 Jun 2005 23:28:58 +0000]
[PATCH] pcmcia: resource handling fixes

- properly bail out in set_cis_map if call to socket driver's set_mem_map
  failed
- don't abort do_mem_probe cycle if one entry failed (!CONFIG_PCMCIA_PROBE)
- don't do iomem probing in chunks larger than 0x800000 (1 << 23) as
  yenta_socket and vrc4173_cardu.c fail to set_mem_map for windows equal to
  or larger than (1 << 24).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: select crc32 in Kconfig for PCMCIA
Dominik Brodowski [Mon, 27 Jun 2005 23:28:57 +0000]
[PATCH] pcmcia: select crc32 in Kconfig for PCMCIA

PCMCIA needs CRC32.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: mod_devicetable.h fix for different sizes in kernel- and userspace
Dominik Brodowski [Mon, 27 Jun 2005 23:28:56 +0000]
[PATCH] pcmcia: mod_devicetable.h fix for different sizes in kernel- and userspace

The size of pointers may differ between (userspace) modpost and (kernelspace)
modules -- so fix mod_devicetable.h to reflect this possibility.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: synclink_cs IRQ_INFO2_INFO is gone
Dominik Brodowski [Mon, 27 Jun 2005 23:28:56 +0000]
[PATCH] pcmcia: synclink_cs IRQ_INFO2_INFO is gone

Remove the IRQ_INFO2_VALID flag in synclink_cs -- I overlooked it when
removing all other users in PCMCIA drivers for 2.6.11.  Thanks to Marcelo
Tosatti for noticing it.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: use request_region in i82365
Dominik Brodowski [Mon, 27 Jun 2005 23:28:55 +0000]
[PATCH] pcmcia: use request_region in i82365

      randy_dunlap <rdunlap@xenotime.net>

Convert deprecated check_region() calls to request/release region.
Add return value check on one request_region().

I suspect that it may do an extra release_region(), which should
generate a warning message from the kernel.

Signed-off-by: randy_dunlap <rdunlap@xenotime.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: release_class
Dominik Brodowski [Mon, 27 Jun 2005 23:28:54 +0000]
[PATCH] pcmcia: release_class

Properly wait for the class refcount to reach zero.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: ds.c cleanup
Dominik Brodowski [Mon, 27 Jun 2005 23:28:54 +0000]
[PATCH] pcmcia: ds.c cleanup

Clean up ds.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: cs.c cleanup
Dominik Brodowski [Mon, 27 Jun 2005 23:28:53 +0000]
[PATCH] pcmcia: cs.c cleanup

Clean up cs.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: move pcmcia resource handling out of cs.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:53 +0000]
[PATCH] pcmcia: move pcmcia resource handling out of cs.c

Move the 16-bit PCMICA resource handling from pcmcia_core.o to pcmcia.o.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: rename some functions
Dominik Brodowski [Mon, 27 Jun 2005 23:28:52 +0000]
[PATCH] pcmcia: rename some functions

Rename some functions in drivers/pcmcia/ to show they belong to the PCMCIA
subsystem.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: remove unneeded includes in ds.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:51 +0000]
[PATCH] pcmcia: remove unneeded includes in ds.c

Remove unnecessary includes in ds.c and pcmcia_ioctl.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: merge struct pcmcia_bus_socket into struct pcmcia_socket
Dominik Brodowski [Mon, 27 Jun 2005 23:28:50 +0000]
[PATCH] pcmcia: merge struct pcmcia_bus_socket into struct pcmcia_socket

Merge struct pcmcia_bus_socket into struct pcmcia_socket.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: make PCMCIA status a bitfield
Dominik Brodowski [Mon, 27 Jun 2005 23:28:50 +0000]
[PATCH] pcmcia: make PCMCIA status a bitfield

make pcmcia_bus_socket->state a bitfield, and rename it pcmcia_state to
prepare for struct pcmcia_bus_socket integration into struct pcmcia_socket.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: clean up cs ds callback
Dominik Brodowski [Mon, 27 Jun 2005 23:28:49 +0000]
[PATCH] pcmcia: clean up cs ds callback

struct pcmcia_callback isn't needed for each socket, one is enough for all
sockets.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: move PCMCIA ioctl to a separate file
Dominik Brodowski [Mon, 27 Jun 2005 23:28:47 +0000]
[PATCH] pcmcia: move PCMCIA ioctl to a separate file

Move all PCMCIA_IOCTL-related code to a different file.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

From: Richard Purdie <rpurdie@rpsys.net>

The pcmcia-move-pcmcia-ioctl-to-a-separate-file patch was corrupted in -mm2
causing this problem.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: add a config option for the PCMICA ioctl
Dominik Brodowski [Mon, 27 Jun 2005 23:28:47 +0000]
[PATCH] pcmcia: add a config option for the PCMICA ioctl

Add a new config option to control the building of the PCMCIA IOCTL. Currently,
it is not yet made public, though the help text is there already.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowksi.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: mark parent bridge windows as resources available for PCMCIA devices
Dominik Brodowski [Mon, 27 Jun 2005 23:28:46 +0000]
[PATCH] pcmcia: mark parent bridge windows as resources available for PCMCIA devices

Automatically mark the parent PCI-PCI bridge windows as resources available
for PCMCIA usage.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: update resource database adjust routines to use unsigned long values
Dominik Brodowski [Mon, 27 Jun 2005 23:28:46 +0000]
[PATCH] pcmcia: update resource database adjust routines to use unsigned long values

Make adjust_io and adjust_memory independent of adjust_t to allow for IO
resources > x86's IO_SPACE_LIMIT.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: add some Documentation
Dominik Brodowski [Mon, 27 Jun 2005 23:28:45 +0000]
[PATCH] pcmcia: add some Documentation

Add some information useful for PCMCIA device driver authors to
Documentation/pcmcia/, and reference it in dmesg in case of hash mismatches.

Also add a reference to pcmciautils to Documentation/Changes.  With recent
changes, you don't need to concern yourself with pcmcia-cs even if you have
PCMCIA hardware, so the example above the list needed to be adapted as well.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowksi.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: more IDs for TDK multifunction cards
Jun Komuro [Mon, 27 Jun 2005 23:28:44 +0000]
[PATCH] pcmcia: more IDs for TDK multifunction cards

Add new pcmcia id_table for fmvj18x_cs and serial_cs.
(TDK multi-function card (NetPartner9610 and MobileNetworker3200))

Signed-off-by: Jun Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia id_table for sl811.cs
David Brownell [Mon, 27 Jun 2005 23:28:43 +0000]
[PATCH] pcmcia id_table for sl811.cs

Catch up with some PCMCIA API changes:

 - Docs say that as of 2.6.11 the PCMCIA IRQInfo2 field is ignored,
   but it's not yet removed from the API; stop using it anyway.

 - As of 2.6.13 PCMCIA finally hotplugs and does driver binding
   without "cardmgr"; add a MODULE_DEVICE_TABLE to support this.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: id_table for synclink_cs.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:42 +0000]
[PATCH] pcmcia: id_table for synclink_cs.c

Add pcmcia_device_id table.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: id_table for pdaudiocf.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:42 +0000]
[PATCH] pcmcia: id_table for pdaudiocf.c

Add pcmcia_device_id table.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: id_table for wl3501_cs.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:41 +0000]
[PATCH] pcmcia: id_table for wl3501_cs.c

Add pcmcia_device_id table.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: id_table for sedlbauer_cs.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:41 +0000]
[PATCH] pcmcia: id_table for sedlbauer_cs.c

Add pcmcia_device_id table.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: id_table for nsp_cs.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:40 +0000]
[PATCH] pcmcia: id_table for nsp_cs.c

Add pcmcia_device_id table.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: id_table for ixj_pcmcia.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:40 +0000]
[PATCH] pcmcia: id_table for ixj_pcmcia.c

Add pcmcia_device_id table.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: id_table for elsa_cs.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:39 +0000]
[PATCH] pcmcia: id_table for elsa_cs.c

Add pcmcia_device_id table.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: id_table for dtl1_cs.c
Dominik Brodowski [Mon, 27 Jun 2005 23:28:39 +0000]
[PATCH] pcmcia: id_table for dtl1_cs.c

Add pcmcia_device_id table.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>