12 years agoMN10300: Update the ASB2303 defconfig
David Howells [Wed, 22 Apr 2009 11:10:07 +0000]
MN10300: Update the ASB2303 defconfig

Update the defconfig for the ASB2303 evaluation board.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoDelete slow-work timers properly
Jonathan Corbet [Wed, 22 Apr 2009 11:01:49 +0000]
Delete slow-work timers properly

Slow-work appears to delete its timer as soon as the first user
unregisters, even though other users could be active.  At the same time, it
never seems to delete slow_work_oom_timer.  Arrange for both to happen in
the shutdown path.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 24 Apr 2009 14:46:51 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
  netfilter: ctnetlink: fix gcc warning during compilation
  net/netrom: Fix socket locking
  netlabel: Always remove the correct address selector
  ucc_geth.c: Fix upsmr setting in RMII mode
  8139too: fix HW initial flow
  af_iucv: Fix race when queuing incoming iucv messages
  af_iucv: Test additional sk states in iucv_sock_shutdown
  af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
  af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
  af_iucv: consider state IUCV_CLOSING when closing a socket
  iwlwifi: DMA fixes
  iwlwifi: add debugging for TX path
  mwl8: fix build warning.
  mac80211: fix alignment calculation bug
  mac80211: do not print WARN if config interface
  iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
  iwlwifi: fix EEPROM validation mask to include OTP only devices
  atmel: fix netdev ops conversion
  pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
  mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Fri, 24 Apr 2009 14:45:52 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix bus type probing for ESP and LE devices.
  sparc32: Update defconfig.
  sparc64: Update defconfig.

12 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Fri, 24 Apr 2009 14:44:58 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Fix modular build of ide-pmac when mediabay is built in
  powerpc/pasemi: Fix build error on UP
  powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
  maintainers: Fix PS3 patterns
  powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning
  powerpc/32: Don't clobber personality flags on exec
  powerpc: Fix crash on CPU hotplug
  powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover
  powerpc/85xx: Added SMP defconfig
  powerpc/85xx: Enabled a bunch of FSL specific drivers/options
  powerpc/85xx: Updated generic mpc85xx_defconfig
  powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD
  fsl_rio: Pass the proper device to dma mapping routines
  powerpc: Fix of_node_put() exit path in of_irq_map_one()
  powerpc/5200: defconfig updates
  powerpc/5200: Add FLASH nodes to lite5200 device tree
  powerpc/device-tree: Document MTD nodes with multiple "reg" tuples
  powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of
  powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back

12 years agocheck_unsafe_exec: s/lock_task_sighand/rcu_read_lock/
Oleg Nesterov [Thu, 23 Apr 2009 23:02:45 +0000]
check_unsafe_exec: s/lock_task_sighand/rcu_read_lock/

write_lock(&current->fs->lock) guarantees we can't wrongly miss
LSM_UNSAFE_SHARE, this is what we care about. Use rcu_read_lock()
instead of ->siglock to iterate over the sub-threads. We must see
all CLONE_THREAD|CLONE_FS threads which didn't pass exit_fs(), it
takes fs->lock too.

With or without this patch we can miss the freshly cloned thread
and set LSM_UNSAFE_SHARE, we don't care.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
[ Fixed lock/unlock typo  - Hugh ]
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodo_execve() must not clear fs->in_exec if it was set by another thread
Oleg Nesterov [Thu, 23 Apr 2009 23:01:56 +0000]
do_execve() must not clear fs->in_exec if it was set by another thread

If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec
unconditionally. This is wrong if we race with our sub-thread which
also does do_execve:

Two threads T1 and T2 and another process P, all share the same
->fs.

T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since
->fs is shared, we set LSM_UNSAFE but not ->in_exec.

P exits and decrements fs->users.

T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not
shared, we set fs->in_exec.

T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and
return to the user-space.

T1 does clone(CLONE_FS /* without CLONE_THREAD */).

T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with
another process.

Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change
do_execve() to clear ->in_exec depending on res.

When do_execve() suceeds, it is safe to clear ->in_exec unconditionally.
It can be set only if we don't share ->fs with another process, and since
we already killed all sub-threads either ->in_exec == 0 or we are the
only user of this ->fs.

Also, we do not need fs->lock to clear fs->in_exec.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosparc: Fix bus type probing for ESP and LE devices.
David S. Miller [Fri, 17 Apr 2009 11:14:15 +0000]
sparc: Fix bus type probing for ESP and LE devices.

If there is a dummy "espdma" or "ledma" parent device above ESP scsi
or LE ethernet device nodes, we have to match the bus as SBUS.

Otherwise the address and size cell counts are wrong and we don't
calculate the final physical device resource values correctly at all.

Commit 5280267c1dddb8d413595b87dc406624bb497946 ("sparc: Fix handling
of LANCE and ESP parent nodes in of_device.c") was meant to fix this
problem, but that only influences the inner loop of
build_device_resources().  We need this logic to also kick in at the
beginning of build_device_resources() as well, when we make the first
attempt to determine the device's immediate parent bus type for 'reg'
property element extraction.

Based almost entirely upon a patch by Friedrich Oslage.

Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agonetfilter: ctnetlink: fix gcc warning during compilation
Pablo Neira Ayuso [Wed, 22 Apr 2009 09:26:37 +0000]
netfilter: ctnetlink: fix gcc warning during compilation

This patch fixes a (bogus?) gcc warning during compilation:

net/netfilter/nf_conntrack_netlink.c:1234: warning: 'helpname' may be used uninitialized in this function
net/netfilter/nf_conntrack_netlink.c:991: warning: 'helpname' may be used uninitialized in this function

In fact, helpname is initialized by ctnetlink_parse_help() so
I cannot see a way to use it without being initialized.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agonet/netrom: Fix socket locking
Jean Delvare [Wed, 22 Apr 2009 07:49:51 +0000]
net/netrom: Fix socket locking

Patch "af_rose/x25: Sanity check the maximum user frame size"
(commit 83e0bbcbe2145f160fbaa109b0439dae7f4a38a9) from Alan Cox got
locking wrong. If we bail out due to user frame size being too large,
we must unlock the socket beforehand.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agonetlabel: Always remove the correct address selector
Paul Moore [Tue, 21 Apr 2009 10:04:22 +0000]
netlabel: Always remove the correct address selector

The NetLabel address selector mechanism has a problem where it can get
mistakenly remove the wrong selector when similar addresses are used.  The
problem is caused when multiple addresses are configured that have different
netmasks but the same address, e.g. 127.0.0.0/8 and 127.0.0.0/24.  This patch
fixes the problem.

Reported-by: Etienne Basset <etienne.basset@numericable.fr>
Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Tested-by: Etienne Basset <etienne.basset@numericable.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoucc_geth.c: Fix upsmr setting in RMII mode
Heiko Schocher [Mon, 20 Apr 2009 22:36:43 +0000]
ucc_geth.c: Fix upsmr setting in RMII mode

If using the UCC on a MPC8360 in RMII mode, don;t set
UCC_GETH_UPSMR_RPM bit in the upsmr register.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago8139too: fix HW initial flow
Jianjun kong [Mon, 20 Apr 2009 23:48:25 +0000]
8139too: fix HW initial flow

While ifconfig eth0 up kernel calls open() of 8139 driver(8139too.c).
In rtl8139_hw_start() of rtl8139_open(), 8139 driver enable RX before
setting up the DMA buffer address. In this interval where RX was
enabled and DMA buffer address is not yet set up, any incoming
broadcast packet would be send to a strange physical address:
0x003e8800 which is the default value of DMA buffer address.
Unfortunately, this address is used by Linux kernel. So kernel panics.
This patch fix it by setting up DMA buffer address before RX enabled
and everything is fine even under broadcast packets attack.

Signed-off-by: Jonathan Lin <jon.lin@vatics.com>
Signed-off-by: Amos Kong <jianjun@zeuux.org>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoaf_iucv: Fix race when queuing incoming iucv messages
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:24 +0000]
af_iucv: Fix race when queuing incoming iucv messages

AF_IUCV runs into a race when queuing incoming iucv messages
and receiving the resulting backlog.

If the Linux system is under pressure (high load or steal time),
the message queue grows up, but messages are not received and queued
onto the backlog queue. In that case, applications do not
receive any data with recvmsg() even if AF_IUCV puts incoming
messages onto the message queue.

The race can be avoided if the message queue spinlock in the
message_pending callback is spreaded across the entire callback
function.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoaf_iucv: Test additional sk states in iucv_sock_shutdown
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:23 +0000]
af_iucv: Test additional sk states in iucv_sock_shutdown

Add few more sk states in iucv_sock_shutdown().

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoaf_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:22 +0000]
af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set

Reject incoming iucv messages if the receive direction has been shut down.
It avoids that the queue of outstanding messages increases and exceeds the
message limit of the iucv communication path.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoaf_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:21 +0000]
af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag

If iucv_sock_recvmsg() is called with MSG_PEEK flag set, the skb is enqueued
twice. If the socket is then closed, the pointer to the skb is freed twice.

Remove the skb_queue_head() call for MSG_PEEK, because the skb_recv_datagram()
function already handles MSG_PEEK (does not dequeue the skb).

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoaf_iucv: consider state IUCV_CLOSING when closing a socket
Ursula Braun [Tue, 21 Apr 2009 06:04:20 +0000]
af_iucv: consider state IUCV_CLOSING when closing a socket

Make sure a second invocation of iucv_sock_close() guarantees proper
freeing of an iucv path.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agopowerpc: Fix modular build of ide-pmac when mediabay is built in
Bartlomiej Zolnierkiewicz [Tue, 21 Apr 2009 09:04:37 +0000]
powerpc: Fix modular build of ide-pmac when mediabay is built in

Now that the powermac IDE host driver can be modular, we need to
export check_media_bay_by_base() and media_bay_set_ide_infos()
from drivers/macintosh/mediabay.c for it.

This fixes the following build error:

> CC [M]  drivers/ide/pmac.o
> drivers/ide/pmac.c: In function ‘pmac_ide_init_dev’:
> drivers/ide/pmac.c:955: error: implicit declaration of function
> ‘check_media_bay_by_base’
> drivers/ide/pmac.c: In function ‘pmac_ide_setup_device’:
> drivers/ide/pmac.c:1090: error: implicit declaration of function
> ‘media_bay_set_ide_infos’
> make[2]: *** [drivers/ide/pmac.o] Error 1
> make[1]: *** [drivers/ide] Error 2
> make: *** [drivers] Error 2

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agopowerpc/pasemi: Fix build error on UP
Geoff Levand [Fri, 17 Apr 2009 06:36:37 +0000]
powerpc/pasemi: Fix build error on UP

A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the pasemi setup.c.

Fixes build errors like these when CONFIG_SMP=n:

  arch/powerpc/platforms/pasemi/setup.c:48: error: redefinition of ‘smp_send_stop’
  include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here

Reported-by: subrata@linux.vnet.ibm.com
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agopowerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
Alexander Beregalov [Fri, 17 Apr 2009 00:15:13 +0000]
powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK

Fixes this build error:

In file included from drivers/macintosh/mediabay.c:21:
include/linux/ide.h:605: error: field 'request_sense_rq' has incomplete type

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agomaintainers: Fix PS3 patterns
Geoff Levand [Thu, 16 Apr 2009 09:05:40 +0000]
maintainers: Fix PS3 patterns

Correct the MAINTAINERS file patterns for PS3.  Removes some PS3
patterns that were under 'CELL BROADBAND ENGINE ARCHITECTURE', and
adds missing PS3 sound and RTC driver patterns.

CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agopowerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning
Geoff Levand [Thu, 16 Apr 2009 09:05:38 +0000]
powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning

Fix build warnings like these when CONFIG_PS3_FLASH=n:

  arch/powerpc/platforms/ps3/os-area.c: warning: 'update_flash_db' defined but not used

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agopowerpc/32: Don't clobber personality flags on exec
Andreas Schwab [Thu, 16 Apr 2009 06:22:01 +0000]
powerpc/32: Don't clobber personality flags on exec

Now that ppc32 implements address randomization it also wants to inherit
personality flags like ADDR_NO_RANDOMIZE across exec, for things like
`setarch ppc -R' to work.  But the ppc32 version of SET_PERSONALITY
forcefully sets PER_LINUX, clearing all personality flags.  So be
careful about preserving the flags.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agopowerpc: Fix crash on CPU hotplug
Michael Ellerman [Thu, 16 Apr 2009 04:47:32 +0000]
powerpc: Fix crash on CPU hotplug

early_init_mmu_secondary() is called at CPU hotplug time, so it
must be marked as __cpuinit, not __init.

Caused by 757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit").

Tested-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agoLinux 2.6.30-rc3
Linus Torvalds [Wed, 22 Apr 2009 03:07:00 +0000]
Linux 2.6.30-rc3

12 years agoMerge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into merge
Paul Mackerras [Wed, 22 Apr 2009 03:02:09 +0000]
Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into merge

12 years agodriver synchronization: make scsi_wait_scan more advanced
Arjan van de Ven [Tue, 21 Apr 2009 20:32:54 +0000]
driver synchronization: make scsi_wait_scan more advanced

There is currently only one way for userspace to say "wait for my storage
device to get ready for the modules I just loaded": to load the
scsi_wait_scan module. Expectations of userspace are that once this
module is loaded, all the (storage) devices for which the drivers
were loaded before the module load are present.

Now, there are some issues with the implementation, and the async
stuff got caught in the middle of this: The existing code only
waits for the scsy async probing to finish, but it did not take
into account at all that probing might not have begun yet.
(Russell ran into this problem on his computer and the fix works for him)

This patch fixes this more thoroughly than the previous "fix", which
had some bad side effects (namely, for kernel code that wanted to wait for
the scsi scan it would also do an async sync, which would deadlock if you did
it from async context already.. there's a report about that on lkml):
The patch makes the module first wait for all device driver probes, and then it
will wait for the scsi parallel scan to finish.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoTrivial: fix a typo in slow-work.h
Jonathan Corbet [Tue, 21 Apr 2009 22:30:32 +0000]
Trivial: fix a typo in slow-work.h

Fix a comment typo in slow-work.h

...a trivial mistake, but it will mess up kerneldoc if nothing else.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoPERCPU: Collect the DECLARE/DEFINE declarations together
David Howells [Tue, 21 Apr 2009 22:00:29 +0000]
PERCPU: Collect the DECLARE/DEFINE declarations together

Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so
that they're in one place, and give them descriptive comments, particularly
the SHARED_ALIGNED variant.

It would be nice to collect these in linux/percpu.h, but that's not possible
without sorting out the severe #include recursion between the x86 arch headers
and the general headers (and possibly other arches too).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoFRV: Fix the section attribute on UP DECLARE_PER_CPU()
David Howells [Tue, 21 Apr 2009 22:00:24 +0000]
FRV: Fix the section attribute on UP DECLARE_PER_CPU()

In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU()
does not agree with that specified by DEFINE_PER_CPU().  This means that
architectures that have a small data section references relative to a base
register may throw up linkage errors due to too great a displacement between
where the base register points and the per-CPU variable.

On FRV, the .h declaration says that the variable is in the .sdata section, but
the .c definition says it's actually in the .data section.  The linker throws
up the following errors:

kernel/built-in.o: In function `release_task':
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o

To fix this, DECLARE_PER_CPU() should simply apply the same section attribute
as does DEFINE_PER_CPU().  However, this is made slightly more complex by
virtue of the fact that there are several variants on DEFINE, so these need to
be matched by variants on DECLARE.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Tue, 21 Apr 2009 21:12:58 +0000]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix btrfs fallocate oops and deadlock
  Btrfs: use the right node in reada_for_balance
  Btrfs: fix oops on page->mapping->host during writepage
  Btrfs: add a priority queue to the async thread helpers
  Btrfs: use WRITE_SYNC for synchronous writes

12 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Tue, 21 Apr 2009 21:12:43 +0000]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  go7007: Convert to the new i2c device binding model

12 years agopowerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover
Kumar Gala [Wed, 15 Apr 2009 21:48:50 +0000]
powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

12 years agopowerpc/85xx: Added SMP defconfig
Kumar Gala [Wed, 15 Apr 2009 21:33:08 +0000]
powerpc/85xx: Added SMP defconfig

Since the vast majority of 85xx platforms are UP we introduce a new SMP
config for the few platforms that have more than one core.  Beyond
CONFIG_SMP=y and its dependencies this should be identical to
mpc85xx_defconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

12 years agopowerpc/85xx: Enabled a bunch of FSL specific drivers/options
Kumar Gala [Tue, 21 Apr 2009 20:40:51 +0000]
powerpc/85xx: Enabled a bunch of FSL specific drivers/options

* Add new 85xx boards
* Added QE/FSL gpio
* Enabled PHY drivers that exist on various boards
* Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE)
* FSL HW Crypto Engine
* CPM I2C
* QE Serial

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

12 years agopowerpc/85xx: Updated generic mpc85xx_defconfig
Kumar Gala [Wed, 15 Apr 2009 21:10:20 +0000]
powerpc/85xx: Updated generic mpc85xx_defconfig

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

12 years agoiwlwifi: DMA fixes
Reinette Chatre [Tue, 21 Apr 2009 17:55:48 +0000]
iwlwifi: DMA fixes

A few issues wrt DMA were uncovered when using the driver with swiotlb.
- driver should not use memory after it has been mapped
- iwl3945's RX queue management cannot use all of iwlagn because
  the size of the RX buffer is different. Revert back to using
  iwl3945 specific routines that map/unmap memory.
- no need to "dma_syn_single_range_for_cpu" followed by pci_unmap_single,
  we can just call pci_unmap_single initially
- only map the memory area that will be used by device. this is especially
  relevant to the mapping of iwl_cmd. we should not map the entire
  structure because the meta data at the beginning of structure contains
  the address to be used later for unmapping. If the address to be used for
  unmapping is stored in mapped data it creates a problem.
- ensure that _if_ memory needs to be modified after it is mapped that we
  call _sync_single_for_cpu first, and then release it back to device with
  _sync_single_for_device
- we mapped the wrong length of data for host commands, with mapped length
  differing with length provided to device, fix that.

Thanks to Jason Andryuk <jandryuk@gmail.com> for significant bisecting
help to find these issues.

This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1964

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Tested-by: Ben Gamari <bgamari@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years agoiwlwifi: add debugging for TX path
Reinette Chatre [Tue, 21 Apr 2009 17:55:47 +0000]
iwlwifi: add debugging for TX path

When debugging TX issues it is helpful to know the seq nr of the
frame being transmitted. The seq nr is printed as part of ucode's
log informing us which frame is being processed. Having this information
printed in driver log makes it easy to match activities between driver
and firmware.

Also make possible to print TX flags directly. These are already printed
as part of entire TX command, but having it printed directly in cpu format
makes it easier to look at.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years agomwl8: fix build warning.
Rami Rosen [Tue, 21 Apr 2009 13:22:01 +0000]
mwl8: fix build warning.

This patch fixes a build warning in mwl8.c.
(Marvell TOPDOG wireless driver)

The warning it fixes is: "large integer implicitly truncated to unsigned type."

The rx_ctrl member of the mwl8k_rx_desc struct is 8 bit (__u8 ), whereas trying
to assign it a 32 bit value (which is returned from  cpu_to_le32())
causes the compiler to issue
a truncation warning.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years agomac80211: fix alignment calculation bug
Johannes Berg [Mon, 20 Apr 2009 23:36:59 +0000]
mac80211: fix alignment calculation bug

When checking whether or not a given frame needs to be
moved to be properly aligned to a 4-byte boundary, we
use & 4 which wasn't intended, this code should check
the lowest two bits.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years agomac80211: do not print WARN if config interface
Reinette Chatre [Mon, 20 Apr 2009 22:36:19 +0000]
mac80211: do not print WARN if config interface

It is expected that config interface will always succeed as mac80211
will only request what driver supports. The exception here is when a
device has rfkill enabled. At this time the rfkill state is unknown to
mac80211 and config interface can fail. When this happens we deal with
this error instead of printing a WARN.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years agoiwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
Reinette Chatre [Mon, 20 Apr 2009 21:37:01 +0000]
iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll

Users reported lockup with work still trying to run
after module has been unloaded.

http://thread.gmane.org/gmane.linux.kernel.wireless.general/30594/focus=30601

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reported-by: TJ <ubuntu@tjworld.net>
Reported-by: Huaxu Wan <huaxu.wan@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years agoiwlwifi: fix EEPROM validation mask to include OTP only devices
Jay Sternberg [Mon, 20 Apr 2009 21:36:54 +0000]
iwlwifi: fix EEPROM validation mask to include OTP only devices

Fix the bug where some revisions of 6000 series hardware cannot
be used. Later versions of 6000 series have the EEPROM replaced by
OTP. For these devices to be used we need to expand valid EEPROM mask.

Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years agobfin_5xx: misplaced parentheses
Roel Kluin [Tue, 21 Apr 2009 19:24:58 +0000]
bfin_5xx: misplaced parentheses

`!' has a higher precedence than `&', parentheses are misplaced.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agovmscan,memcg: reintroduce sc->may_swap
KOSAKI Motohiro [Tue, 21 Apr 2009 19:24:57 +0000]
vmscan,memcg: reintroduce sc->may_swap

Commit a6dc60f8975ad96d162915e07703a4439c80dcf0 ("vmscan: rename
sc.may_swap to may_unmap") removed the may_swap flag, but memcg had used
it as a flag for "we need to use swap?", as the name indicate.

And in the current implementation, memcg cannot reclaim mapped file
caches when mem+swap hits the limit.

re-introduce may_swap flag and handle it at get_scan_ratio().  This
patch doesn't influence any scan_control users other than memcg.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoedac: ppc mpc85xx fix mc err detect
Dave Jiang [Tue, 21 Apr 2009 19:24:56 +0000]
edac: ppc mpc85xx fix mc err detect

Error found by Jeff Haran.

The error detect register is 0s when no errors are detected.  The check
code is incorrect, so reverse check sense.

Reported-by: Jeff Haran <jharan@Brocade.COM>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoscsi: mpt: suppress debugobjects warning
Eric Paris [Tue, 21 Apr 2009 19:24:54 +0000]
scsi: mpt: suppress debugobjects warning

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13133

ODEBUG: object is on stack, but not annotated
------------[ cut here ]------------
WARNING: at lib/debugobjects.c:253 __debug_object_init+0x1f3/0x276()
Hardware name: VMware Virtual Platform
Modules linked in: mptspi(+) mptscsih mptbase scsi_transport_spi ext3 jbd mbcache
Pid: 540, comm: insmod Not tainted 2.6.28-mm1 #2
Call Trace:
 [<c042c51c>] warn_slowpath+0x74/0x8a
 [<c0469600>] ? start_critical_timing+0x96/0xb7
 [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c
 [<c0446fad>] ? trace_hardirqs_off_caller+0x18/0xaf
 [<c044704f>] ? trace_hardirqs_off+0xb/0xd
 [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c
 [<c042cb84>] ? release_console_sem+0x1a5/0x1ad
 [<c05013e6>] __debug_object_init+0x1f3/0x276
 [<c0501494>] debug_object_init+0x13/0x17
 [<c0433c56>] init_timer+0x10/0x1a
 [<e08e5b54>] mpt_config+0x1c1/0x2b7 [mptbase]
 [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase]
 [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase]
 [<e08e6fa2>] mpt_do_ioc_recovery+0x950/0x1212 [mptbase]
 [<c04496c2>] ? __lock_acquire+0xa69/0xacc
 [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c
 [<c060c3af>] ? _spin_unlock_irq+0x22/0x26
 [<c04f2d8b>] ? string+0x2b/0x76
 [<c04f310e>] ? vsnprintf+0x338/0x7b3
 [<c04496c2>] ? __lock_acquire+0xa69/0xacc
 [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c
 [<c04496c2>] ? __lock_acquire+0xa69/0xacc
 [<c044897d>] ? debug_check_no_locks_freed+0xeb/0x105
 [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c
 [<c04488bc>] ? debug_check_no_locks_freed+0x2a/0x105
 [<c0446b8c>] ? lock_release_holdtime+0x43/0x48
 [<c043f742>] ? up_read+0x16/0x29
 [<c05076f8>] ? pci_get_slot+0x66/0x72
 [<e08e89ca>] mpt_attach+0x881/0x9b1 [mptbase]
 [<e091c8e5>] mptspi_probe+0x11/0x354 [mptspi]

Noticing that every caller of mpt_config has its CONFIGPARMS struct
declared on the stack and thus the &pCfg->timer is always on the stack I
changed init_timer() to init_timer_on_stack() and it seems to have shut
up.....

Cc: "Moore, Eric Dean" <Eric.Moore@lsil.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com>
Cc: <stable@kernel.org> [2.6.29.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosgi-xp/sgi-gru: allow modules to load on non-uv systems
Robin Holt [Tue, 21 Apr 2009 19:24:53 +0000]
sgi-xp/sgi-gru: allow modules to load on non-uv systems

For an upcoming distro release, we need to have the xp kernel module
loadable even when not on UV equipment.  The xpc module will not load.
This will allow one set of modules dependent upon xp to work on either UV
or non-UV equipment.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agouml: kill a kconfig warning
WANG Cong [Tue, 21 Apr 2009 19:24:52 +0000]
uml: kill a kconfig warning

Got this warning from Kconfig:

   boolean symbol INPUT tested for 'm'? test forced to 'n'

because INPUT is tristate, not bool.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofrv: insert PCI root bus resources for the MB93090 devel motherboard
David Howells [Tue, 21 Apr 2009 19:24:51 +0000]
frv: insert PCI root bus resources for the MB93090 devel motherboard

Insert PCI root bus resources for the FRV-based MB93090 development kit
motherboard.  This is required because the CPU's window onto the PCI bus
address space is considerably smaller than the CPU's full address space
and non-PCI devices lie outside of the PCI window that we might want to
access.

Without this patch, the PCI root bus uses the platform-level bus
resources, and these are then confined to the PCI window, thus making
platform_device_add() reject devices outside of this window.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agortc-cmos: fix printk output
Krzysztof Halasa [Tue, 21 Apr 2009 19:24:49 +0000]
rtc-cmos: fix printk output

With no IRQ available/defined, RTC-CMOS driver prints something like:
rtc0: alarms up to one no, y3k, 114 bytes nvram
                              ^^^^
I guess the following is a bit easier to understand:
rtc0: no alarms, y3k, 114 bytes nvram

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agospi: documentation: emphasise spi_master.setup() semantics
David Brownell [Tue, 21 Apr 2009 19:24:49 +0000]
spi: documentation: emphasise spi_setup() semantics

This is a doc-only patch which I hope will reduce the number of
spi_master controller driver patches starting out with a common
implementation bug.

(As in: almost every spi_master driver I see starts out with its
version of this bug.  Sigh.)

It just re-emphasizes that the setup() method may be called for one
device while a transfer is active on another ...  which means that most
driver implementations shouldn't touch any registers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMAINTAINERS: add a more searchable string for the H8300 architecture.
Robert P. J. Day [Tue, 21 Apr 2009 19:24:47 +0000]
MAINTAINERS: add a more searchable string for the H8300 architecture.

Add a parenthesized string of "H8300" for more convenient searchability
in the MAINTAINERS file.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMAINTAINERS: add Matt Mackall to embedded maintainers
Matt Mackall [Tue, 21 Apr 2009 19:24:47 +0000]
MAINTAINERS: add Matt Mackall to embedded maintainers

Impact: make more work for myself

Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agospi: pxa2xx: limit reaches -1
Roel Kluin [Tue, 21 Apr 2009 19:24:46 +0000]
spi: pxa2xx: limit reaches -1

On line 944 the return value of flush() is considered as a boolean,
but limit reaches -1 upon timeout which evaluates to true.

On 540, 594, 720 the same occurs for wait_ssp_rx_stall()
On 536 the same occurs for wait_dma_channel_stop()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMAINTAINERS: update KMEMTRACE pattern after file rename
Joe Perches [Tue, 21 Apr 2009 19:24:45 +0000]
MAINTAINERS: update KMEMTRACE pattern after file rename

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMAINTAINERS: remove include/asm-*/suspend* file patterns
Joe Perches [Tue, 21 Apr 2009 19:24:44 +0000]
MAINTAINERS: remove include/asm-*/suspend* file patterns

There are no more arches with suspend support using these directories.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agopxa2xx_spi: restore DRCMR on resume
Daniel Ribeiro [Tue, 21 Apr 2009 19:24:43 +0000]
pxa2xx_spi: restore DRCMR on resume

If DMA is enabled, any spi_sync call after suspend/resume would block
forever, because DRCMR is lost on suspend.  This patch restores DRCMR to
the same values set by probe.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agodrivers/input/serio/hp_sdc.c: fix crash when removing hp_sdc module
Helge Deller [Tue, 21 Apr 2009 19:24:42 +0000]
drivers/input/serio/hp_sdc.c: fix crash when removing hp_sdc module

On parisc machines, which don't have HIL, removing the hp_sdc module
panics the kernel.  Fix this by returning early in hp_sdc_exit() if no HP
SDC controller was found.

Add functionality to probe for the hp_sdc_mlc kernel module (which takes
care of the upper layer HIL functionality on parisc) after two seconds.
This is needed to get all the other HIL drivers (keyboard / mouse/ ..)
drivers automatically loaded by udev later as well.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Frans Pop <elendil@planet.nl>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemcg: use rcu_dereference to access mm->owner
KAMEZAWA Hiroyuki [Tue, 21 Apr 2009 19:24:41 +0000]
memcg: use rcu_dereference to access mm->owner

mm->owner should be accessed with rcu_dereference().

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agohugetlbfs: return negative error code for bad mount option
Akinobu Mita [Tue, 21 Apr 2009 19:24:05 +0000]
hugetlbfs: return negative error code for bad mount option

This fixes the following BUG:

  # mount -o size=MM -t hugetlbfs none /huge
  hugetlbfs: Bad value 'MM' for mount option 'size=MM'
  ------------[ cut here ]------------
  kernel BUG at fs/super.c:996!

Due to

BUG_ON(!mnt->mnt_sb);

in vfs_kern_mount().

Also, remove unused #include <linux/quotaops.h>

Cc: William Irwin <wli@holomorphy.com>
Cc: <stable@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipmi: add oem message handling
dann frazier [Tue, 21 Apr 2009 19:24:05 +0000]
ipmi: add oem message handling

Enable userspace to receive messages that a BMC transmits using an OEM
medium.  This is used by the HP iLO2.

Based on code originally written by Patrick Schoeller.

Signed-off-by: dann frazier <dannf@hp.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipmi: fix statistics counting issues
Corey Minyard [Tue, 21 Apr 2009 19:24:04 +0000]
ipmi: fix statistics counting issues

Bela Lubkin noticed that the statistics for send IPMB and LAN commands
in the IPMI driver could be incremented even if an error occurred.  Move
the increments to the proper place to avoid this.

Also add some statistics for retransmissions that failed, and some little
helper functions to neaten up the code a little.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Bela Lubkin <blubkin@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipmi: test for event buffer before using
Corey Minyard [Tue, 21 Apr 2009 19:24:03 +0000]
ipmi: test for event buffer before using

The IPMI driver would attempt to use the event buffer even if that
didn't exist on the BMC.  This patch modified the IPMI driver to check
for the event buffer's existence before trying to use it.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipmi: fix platform return check
Corey Minyard [Tue, 21 Apr 2009 19:24:02 +0000]
ipmi: fix platform return check

The wrong return value is being tested when allocating a platform device
in the IPMI SI code.  Check the right value.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoclocksource: add enable() and disable() callbacks
Magnus Damm [Tue, 21 Apr 2009 19:24:02 +0000]
clocksource: add enable() and disable() callbacks

Add enable() and disable() callbacks for clocksources.

This allows us to put unused clocksources in power save mode.  The
functions clocksource_enable() and clocksource_disable() wrap the
callbacks and are inserted in the timekeeping code to enable before use
and disable after switching to a new clocksource.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoclocksource: pass clocksource to read() callback
Magnus Damm [Tue, 21 Apr 2009 19:24:00 +0000]
clocksource: pass clocksource to read() callback

Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agopxafb: lcsr1 is unused without CONFIG_FB_PXA_OVERLAY
Denis V. Lunev [Tue, 21 Apr 2009 19:23:59 +0000]
pxafb: lcsr1 is unused without CONFIG_FB_PXA_OVERLAY

Fixes the warning:

  drivers/video/pxafb.c: In function 'pxafb_handle_irq':
  drivers/video/pxafb.c:1442: warning: unused variable 'lcsr1'

[akpm@linux-foundation.org: save an ifdef]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoasiliantfb: add missing return statement
Vlada Peric [Tue, 21 Apr 2009 19:23:59 +0000]
asiliantfb: add missing return statement

Commit 032220ba (asiliantfb: fix cmap memory leaks) changed the function
init_asiliant from void to int, resulting in the following compile warning:

  drivers/video/asiliantfb.c: In function `init_asiliant':
  drivers/video/asiliantfb.c:536: warning: control reaches end of non-void function

Fix the warning by returning 0.

Signed-off-by: Vlada Peric <vlada.peric@gmail.com>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agopowerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD
Timur Tabi [Mon, 20 Apr 2009 15:54:35 +0000]
powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD

The ULI 1575 PCI quirk function for the Freescale MPC8610 HPCD was disabling
the SATA INTx interrupt, even when SATA support was enabled.  This was safe,
because the SATA driver re-enabled it.  But with commit a5bfc471 ("ahci: drop
intx manipulation on msi enable"), the driver no longer does this, and so SATA
support on the 8610 HPCD is broken.

The original quirk function disabled INTx because it caused some other
interrupt problem during early development on this board, but no one remembers
any more what that problem was, and it doesn't seem to occur any more.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

12 years agofsl_rio: Pass the proper device to dma mapping routines
Anton Vorontsov [Sat, 18 Apr 2009 17:48:52 +0000]
fsl_rio: Pass the proper device to dma mapping routines

The driver should pass a device that specifies internal DMA ops, but
currently NULL pointer is passed, therefore following bug appears
during boot up:

  ------------[ cut here ]------------
  Kernel BUG at c0018a7c [verbose debug info unavailable]
  Oops: Exception in kernel mode, sig: 5 [#1]
  [...]
  NIP [c0018a7c] fsl_rio_doorbell_init+0x34/0x60
  LR [c0018a70] fsl_rio_doorbell_init+0x28/0x60
  Call Trace:
  [ef82bda0] [c0018a70] fsl_rio_doorbell_init+0x28/0x60 (unreliable)
  [ef82bdc0] [c0019160] fsl_rio_setup+0x6b8/0x84c
  [ef82be20] [c02d28ac] fsl_of_rio_rpn_probe+0x30/0x50
  [ef82be40] [c0234f20] of_platform_device_probe+0x5c/0x84
  [...]
  ---[ end trace 561bb236c800851f ]---

This patch fixes the issue.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

12 years agogo7007: Convert to the new i2c device binding model
Jean Delvare [Tue, 21 Apr 2009 19:47:22 +0000]
go7007: Convert to the new i2c device binding model

Move the go7007 driver away from the legacy i2c binding model, which
is going away really soon now.

The I2C addresses of the audio and video chips in s2250-board didn't
look quite right, apparently they were left-aligned values when Linux
wants right-aligned values, so I fixed them too.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoBtrfs: fix btrfs fallocate oops and deadlock
Chris Mason [Tue, 21 Apr 2009 15:53:38 +0000]
Btrfs: fix btrfs fallocate oops and deadlock

Btrfs fallocate was incorrectly starting a transaction with a lock held
on the extent_io tree for the file, which could deadlock.  Strictly
speaking it was using join_transaction which would be safe, but it is better
to move the transaction outside of the lock.

When preallocated extents are overwritten, btrfs_mark_buffer_dirty was
being called on an unlocked buffer.  This was triggering an assertion and
oops because the lock is supposed to be held.

The bug was calling btrfs_mark_buffer_dirty on a leaf after btrfs_del_item had
been run.  btrfs_del_item takes care of dirtying things, so the solution is a
to skip the btrfs_mark_buffer_dirty call in this case.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
Linus Torvalds [Tue, 21 Apr 2009 15:27:30 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Fix page_mkwrite() return code
  GFS2: Clear dirty bit at end of inode glock sync

12 years agoMerge branch 'sh/for-2.6.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Tue, 21 Apr 2009 15:16:14 +0000]
Merge branch 'sh/for-2.6.30' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix mmap2 for handling differing PAGE_SIZEs.
  sh: sh7723: Don't default enable the RTC clock.
  sh: sh7722: Don't default enable the RTC clock.
  rtc: rtc-sh: clock framework support.

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Tue, 21 Apr 2009 14:56:17 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  reiserfs: fix j_last_flush_trans_id type
  fs: Mark get_filesystem_list() as __init function.
  kill vfs_stat_fd / vfs_lstat_fd
  Separate out common fstatat code into vfs_fstatat
  ecryptfs: use memdup_user()
  ncpfs: use memdup_user()
  xfs: use memdup_user()
  sysfs: use memdup_user()
  btrfs: use memdup_user()
  xattr: use memdup_user()
  autofs4: use memchr() in invalid_string()
  Documentation/filesystems: remove out of date reference to BKL being held
  Fix i_mutex vs. readdir handling in nfsd
  fs/compat_ioctl: fix build when !BLOCK
  Fix autofs_expire()
  No need for crossing to mountpoint in audit_tag_tree()
  Safer nfsd_cross_mnt()
  Touch all affected namespaces on propagation of mount
  Fix AUTOFS_DEV_IOCTL_REQUESTER_CMD

12 years agoFix SYSCALL_ALIAS for older MIPS assembler
Thomas Bogendoerfer [Tue, 21 Apr 2009 11:44:13 +0000]
Fix SYSCALL_ALIAS for older MIPS assembler

Older MIPS assembler don't support .set for defining aliases.
Using = works for old and new assembers.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoNFS: Fix the XDR iovec calculation in nfs3_xdr_setaclargs
Trond Myklebust [Mon, 20 Apr 2009 18:58:35 +0000]
NFS: Fix the XDR iovec calculation in nfs3_xdr_setaclargs

Commit ae46141ff08f1965b17c531b571953c39ce8b9e2 (NFSv3: Fix posix ACL code)
introduces a bug in the calculation of the XDR header iovec. In the case
where we are inlining the acls, we need to adjust the length of the iovec
req->rq_svec, in addition to adjusting the total buffer length.

Tested-by: Leonardo Chiquitto <leonardo.lists@gmail.com>
Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoatmel: fix netdev ops conversion
Johannes Berg [Tue, 21 Apr 2009 09:08:51 +0000]
atmel: fix netdev ops conversion

sparse says:

drivers/net/wireless/atmel.c:1501:3: warning: Initializer entry defined twice
drivers/net/wireless/atmel.c:1505:3:   also defined here

and it's correct; atmel has its own ndo_change_mtu and
shouldn't use eth_change_mtu.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agopcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
Ken Kawasaki [Sat, 18 Apr 2009 13:44:44 +0000]
pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM

pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agomlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails
Roland Dreier [Mon, 20 Apr 2009 18:32:08 +0000]
mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails

If creating a workqueue fails, don't jump to the error path where that
same workqueue is destroyed, since destroy_workqueue() can't handle a
NULL pointer.

This was spotted by the Coverity checker (CID 2617).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agomlx4_en: Move to SW counters for total bytes and packets
Yevgeny Petrilin [Mon, 20 Apr 2009 04:34:38 +0000]
mlx4_en: Move to SW counters for total bytes and packets

The per ring counters are implemented in SW. Now moving to have the total
counters as the sum of all rings. This way the numbers will always be consistent
and we no longer depend on HW buffer size limitations for those counters
that can be insufficient in some cases.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agomlx4_en: use NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM for tx csum at initialization
Yevgeny Petrilin [Mon, 20 Apr 2009 04:33:15 +0000]
mlx4_en: use NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM for tx csum at initialization

The former usage was to set the NETIF_F_HW_CSUM flag which is not used
in get_tx_csum. It caused Ethtool to show tx checksum as "on" even
though it was turned off in previous operation.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agomlx4_en: Assign dummy event handler for TX queue
Yevgeny Petrilin [Mon, 20 Apr 2009 04:30:03 +0000]
mlx4_en: Assign dummy event handler for TX queue

The low level driver always assumes this handler exists.
The lack of it could cause kernel panic

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agomlx4_en: Fix a race at restart task
Yevgeny Petrilin [Mon, 20 Apr 2009 04:26:05 +0000]
mlx4_en: Fix a race at restart task

The query whether the port is up or not should be done at
the execution of the restart task and not when it is queued.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agomlx4_en: Fix error handling while activating RX rings
Yevgeny Petrilin [Mon, 20 Apr 2009 04:24:28 +0000]
mlx4_en: Fix error handling while activating RX rings

In case of failure of either srq creation or page allocation,
the cleanup code handled the failed ring as well, and tried
to destroy resources that where not allocated.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoMerge branch 'sh/stable-updates' into sh/for-2.6.30
Paul Mundt [Tue, 21 Apr 2009 08:12:16 +0000]
Merge branch 'sh/stable-updates' into sh/for-2.6.30

12 years agoreiserfs: fix j_last_flush_trans_id type
Al Viro [Tue, 21 Apr 2009 03:29:41 +0000]
reiserfs: fix j_last_flush_trans_id type

Conversion in commit 600ed41675d8c384519d8f0b3c76afed39ef2f4b had missed
that one, but converted format from %lu to %u.  As the result,
/proc/..../journal got buggered on 64bit boxen.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agofs: Mark get_filesystem_list() as __init function.
Tetsuo Handa [Thu, 9 Apr 2009 11:17:52 +0000]
fs: Mark get_filesystem_list() as __init function.

"int get_filesystem_list(char * buf)" is called by only
"static void __init get_fs_names(char *page)".
We can mark get_filesystem_list() as "__init".

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agokill vfs_stat_fd / vfs_lstat_fd
Christoph Hellwig [Wed, 8 Apr 2009 20:34:03 +0000]
kill vfs_stat_fd / vfs_lstat_fd

There's really no reason to keep vfs_stat_fd and vfs_lstat_fd with
Oleg's vfs_fstatat.  Use vfs_fstatat for the few cases having the
directory fd, and switch all others to vfs_stat / vfs_lstat.

Reviewed-by: Christoph Hellwig <hch@lst.de>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agoSeparate out common fstatat code into vfs_fstatat
Oleg Drokin [Wed, 8 Apr 2009 16:05:42 +0000]
Separate out common fstatat code into vfs_fstatat

This is a version incorporating Christoph's suggestion.

Separate out common *fstatat functionality into a single function
instead of duplicating it all over the code.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agoecryptfs: use memdup_user()
Li Zefan [Wed, 8 Apr 2009 07:09:29 +0000]
ecryptfs: use memdup_user()

Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agoncpfs: use memdup_user()
Li Zefan [Wed, 8 Apr 2009 07:08:53 +0000]
ncpfs: use memdup_user()

Remove open-coded memdup_user()

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agoxfs: use memdup_user()
Li Zefan [Wed, 8 Apr 2009 07:08:04 +0000]
xfs: use memdup_user()

Remove open-coded memdup_user()

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agosysfs: use memdup_user()
Li Zefan [Wed, 8 Apr 2009 07:07:30 +0000]
sysfs: use memdup_user()

Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agobtrfs: use memdup_user()
Li Zefan [Wed, 8 Apr 2009 07:06:54 +0000]
btrfs: use memdup_user()

Remove open-coded memdup_user().

Note this changes some GFP_NOFS to GFP_KERNEL, since copy_from_user() may
cause pagefault, it's pointless to pass GFP_NOFS to kmalloc().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agoxattr: use memdup_user()
Li Zefan [Wed, 8 Apr 2009 07:06:12 +0000]
xattr: use memdup_user()

Remove open-coded memdup_user()

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agoautofs4: use memchr() in invalid_string()
Al Viro [Tue, 7 Apr 2009 15:12:46 +0000]
autofs4: use memchr() in invalid_string()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

12 years agoDocumentation/filesystems: remove out of date reference to BKL being held
Adrian McMenamin [Tue, 21 Apr 2009 01:38:28 +0000]
Documentation/filesystems: remove out of date reference to BKL being held

Documentation/filesystems/vfs.txt incorrectly states that the kernel is
locked during the call to statfs (Documentation/filesystems/Locking
correctly says it is not). This patch removes the offending sentence.

remove reference to BKL being held in statfs

Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>