10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Mon, 26 Jul 2010 20:06:39 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: musb: tusb6010: fix compile error with n8x0_defconfig
  USB: FTDI: Add support for the RT System VX-7 radio programming cable
  USB: add quirk for Broadcom BT dongle
  USB: usb-storage: fix initializations of urb fields
  USB: xhci: Set Mult field in endpoint context correctly.
  USB: sisusbvga: Fix for USB 3.0
  USB: adds Artisman USB dongle to list of quirky devices
  USB: xhci: Set EP0 dequeue ptr after reset of configured device.
  USB: Fix USB3.0 Port Speed Downgrade after port reset
  USB: xHCI: Fix another bug in link TRB activation change.
  USB: option: Add support for AMOI Skypephone S2
  USB: New PIDs for Qualcomm gobi 2000 (qcserial)
  USB: ftdi_sio: support for Signalyzer tools based on FTDI chips
  USB: s3c2410_udc: be aware of connected gadget driver
  USB: Expose vendor-specific ACM channel on Nokia 5230
  USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c
  USB: option: add support for 1da5:4518

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Mon, 26 Jul 2010 20:06:25 +0000]
Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: fix rs485 for atmel_serial on avr32

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Mon, 26 Jul 2010 20:04:25 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: add pipe A force quirks to i915 driver
  drm/i915: Fix panel fitting regression since 734b4157
  drm/i915: fix deadlock in fb teardown
  drm/i915: don't free non-existent compressed llb on ILK+
  agp/intel: Use the correct mask to detect i830 aperture size.
  drm/i915: disable FBC when more than one pipe is active
  drm/i915: Use the correct scanout alignment for fbcon.
  drm/i915: make sure eDP panel is turned on
  drm/i915: add PANEL_UNLOCK_REGS definition
  drm/i915: Make G4X-style PLL search more permissive
  drm/i915: Clear any existing dither mode prior to enabling spatial dithering
  drm/i915: handle shared framebuffers when flipping
  drm/i915: Explosion following OOM in do_execbuffer.
  gpu/drm/i915: Add a blacklist to omit modeset on LID open

10 years agoUSB: musb: tusb6010: fix compile error with n8x0_defconfig
Felipe Balbi [Mon, 5 Jul 2010 09:12:01 +0000]
USB: musb: tusb6010: fix compile error with n8x0_defconfig

Drop the unnecessary empty stubs in tusb6010.c and avoid
a compile error when building kernel for n8x0.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: FTDI: Add support for the RT System VX-7 radio programming cable
Corey Minyard [Wed, 21 Jul 2010 13:39:22 +0000]
USB: FTDI: Add support for the RT System VX-7 radio programming cable

RT Systems has put out bunch of ham radio cables based on the FT232RL
chip.  Each cable type has a unique PID, this adds one for the Yaesu VX-7
radios.

Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: add quirk for Broadcom BT dongle
Oliver Neukum [Wed, 14 Jul 2010 16:26:22 +0000]
USB: add quirk for Broadcom BT dongle

This device needs to be reset when resuming

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: usb-storage: fix initializations of urb fields
Bob Copeland [Mon, 12 Jul 2010 15:18:18 +0000]
USB: usb-storage: fix initializations of urb fields

Commit 0ede76fcec5415ef82a423a95120286895822e2d, "USB: remove uses of
URB_NO_SETUP_DMA_MAP" introduced a regression by inadvertantly removing
initialization of the transfer flags.  This caused initialization
failures in the ums-karma driver.  Fix the regression by zeroing it.

While at it, as Alan Stern points out, the initializers for
actual_length and status are handled by the core and error_count
only matters for isochronous urbs, so they don't need to be set here.
Remove them.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: xhci: Set Mult field in endpoint context correctly.
Sarah Sharp [Sat, 10 Jul 2010 13:48:01 +0000]
USB: xhci: Set Mult field in endpoint context correctly.

The bmAttributes field of the SuperSpeed Endpoint Companion Descriptor has
different meanings, depending on the endpoint type.  If the endpoint is
isochronous, the bmAttributes field is the maximum number of packets
within a service interval that this endpoint supports.  If the endpoint is
bulk, it's the number of stream IDs this endpoint supports.

Only set the Mult field of the xHCI endpoint context using the
bmAttributes field if the endpoint is isochronous, and the device is a
SuperSpeed device.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: sisusbvga: Fix for USB 3.0
Oliver Neukum [Fri, 16 Jul 2010 15:36:26 +0000]
USB: sisusbvga: Fix for USB 3.0

Super speed is also fast enough to let sisusbvga operate.
Therefor expand the checks.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: adds Artisman USB dongle to list of quirky devices
Paul Mortier [Fri, 9 Jul 2010 12:18:50 +0000]
USB: adds Artisman USB dongle to list of quirky devices

When an attempt is made to read the interface strings of the Artisman
Watchdog USB dongle (idVendor:idProduct 04b4:0526) an error is written
to the dmesg log (uhci_result_common: failed with status 440000) and the
dongle resets itself, resulting in a disconnect/reconnect loop.

Adding the dongle to the list of devices in quirks.c, with the same
quirk Alan Stern's previous patch for the Saitek Cyborg Gold 3D
joystick, stops the device from resetting and allows it to be used with
no problems.

Signed-off-by: Paul Mortier <mortier@btinternet.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: xhci: Set EP0 dequeue ptr after reset of configured device.
Sarah Sharp [Fri, 9 Jul 2010 15:08:54 +0000]
USB: xhci: Set EP0 dequeue ptr after reset of configured device.

When a configured device is reset, the control endpoint's ring is reused.
If control transfers to the device were issued before the device is reset,
the dequeue pointer will be somewhere in the middle of the ring.  If the
device is then issued an address with the set address command, the xHCI
driver must provide a valid input context for control endpoint zero.

The original code would give the hardware the original input context,
which had a dequeue pointer set to the top of the ring.  This would cause
the host to re-execute any control transfers until it reached the ring's
enqueue pointer.  When issuing a set address command for a device that has
just been configured and then reset, use the control endpoint's enqueue
pointer as the hardware's dequeue pointer.

Assumption:  All control transfers will be completed or cancelled before
the set address command is issued to the device.  If there are any
outstanding control transfers, this code will not work.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: Fix USB3.0 Port Speed Downgrade after port reset
Sarah Sharp [Fri, 9 Jul 2010 15:08:48 +0000]
USB: Fix USB3.0 Port Speed Downgrade after port reset

Without this fix, a USB 3.0 port is downgraded to full speed after a port
reset of a configured device.  The USB 3.0 terminations will be disabled
permanently, and USB 3.0 devices will always enumerate as full speed
devices, until the host controller is unplugged (if it is an ExpressCard)
or the computer is rebooted.

Fajun Chen traced this traced the speed downgrade issue to the port reset
and the interpretation of port status in USB hub driver code.  The hub
code was not testing for the port being a SuperSpeed port, and it fell
through to the else case of Full Speed.

The following patch adds SuperSpeed mapping from the port status, and
fixes the speed downgrade issue.

Reported-by: Fajun Chen <fajun.chen@seagate.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: xHCI: Fix another bug in link TRB activation change.
Sarah Sharp [Fri, 9 Jul 2010 15:08:38 +0000]
USB: xHCI: Fix another bug in link TRB activation change.

Commit 6c12db90f19727c76990e7f4801c67a148b30111 also seems to have
introduced a bug that is triggered when the command ring is about to wrap.
The inc_enq() function will not have moved the enqueue pointer past the
link TRB.  It is supposed to be moved past the link TRB in prepare_ring(),
which should be called before a TD is enqueued.  However, the
queue_command() function never calls the prepare_ring() function because
prepare_ring() is only supposed to be used for endpoint rings.  That means
the enqueue pointer will not be moved past the link TRB, and will get
overwritten.

The fix is to make queue_command() call prepare_ring() with a fake
endpoint status (set to running).  Then the enqueue pointer will get moved
past the link TRB.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: option: Add support for AMOI Skypephone S2
Dennis Jansen [Fri, 9 Jul 2010 20:03:53 +0000]
USB: option: Add support for AMOI Skypephone S2

usbserial: Add AMOI Skypephone S2 support.

This patch adds support for the AMOI Skypephone S2 to the usbserial module.

Tested-by: Dennis Jansen <Dennis.Jansen@web.de>
Signed-off-by: Dennis Jansen <Dennis.Jansen@web.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: New PIDs for Qualcomm gobi 2000 (qcserial)
Andrew Bird [Thu, 1 Jul 2010 19:50:07 +0000]
USB: New PIDs for Qualcomm gobi 2000 (qcserial)

Adds support for the Generic Qualcomm Gobi 2000 WWAN UMTS/CDMA modem

Signed-off-by: Andrew Bird <ajb@spheresytems.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: ftdi_sio: support for Signalyzer tools based on FTDI chips
Colin Leitner [Thu, 1 Jul 2010 08:49:55 +0000]
USB: ftdi_sio: support for Signalyzer tools based on FTDI chips

ftdi_sio: support for Signalyzer tools based on FTDI chips

This patch adds support for the Xverve Signalyzers.

Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: s3c2410_udc: be aware of connected gadget driver
Vladimir Zapolskiy [Tue, 29 Jun 2010 19:36:26 +0000]
USB: s3c2410_udc: be aware of connected gadget driver

To escape from data abort in interrupt handler, it is required to
check for a connected gadget before delivering control requests.

The change fixes the following panic, which occurs with no loaded
gadget driver and input USB_REQ_GET_DESCRIPTOR request:

Kernel panic - not syncing: Fatal exception in interrupt
[<c0025874>] (unwind_backtrace+0x0/0xd8) from [<c0253f14>] (panic+0x40/0x110)
[<c0253f14>] (panic+0x40/0x110) from [<c002470c>] (die+0x154/0x180)
[<c002470c>] (die+0x154/0x180) from [<c0026448>] (__do_kernel_fault+0x64/0x74)
[<c0026448>] (__do_kernel_fault+0x64/0x74) from [<c0026610>] (do_page_fault+0x1b8/0x1cc)
[<c0026610>] (do_page_fault+0x1b8/0x1cc) from [<c00202d4>] (do_DataAbort+0x34/0x94)
[<c00202d4>] (do_DataAbort+0x34/0x94) from [<c0020a60>] (__dabt_svc+0x40/0x60)
Exception stack(0xc0327ea8 to 0xc0327ef0)
7ea0:                   bf0026b0 c0327ef0 c0327ee4 00000000 bf002590 00000093
7ec0: 00000001 bf0026b0 bf002990 00000000 00000008 0000143d 00003f00 c0327ef0
7ee0: bf001364 bf001360 20000093 ffffffff
[<c0020a60>] (__dabt_svc+0x40/0x60) from [<bf001360>] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc])
[<bf001360>] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc]) from [<c0058aa0>] (handle_IRQ_event+0x3c/0x104)
[<c0058aa0>] (handle_IRQ_event+0x3c/0x104) from [<c005a428>] (handle_edge_irq+0x12c/0x164)
[<c005a428>] (handle_edge_irq+0x12c/0x164) from [<c0020068>] (asm_do_IRQ+0x68/0x88)
[<c0020068>] (asm_do_IRQ+0x68/0x88) from [<c0020aa4>] (__irq_svc+0x24/0xa0)

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: Expose vendor-specific ACM channel on Nokia 5230
Przemo Firszt [Mon, 28 Jun 2010 20:29:34 +0000]
USB: Expose vendor-specific ACM channel on Nokia 5230

Nokia S60 phones expose two ACM channels. The first is
a modem, the second is 'vendor-specific' but is treated
as a serial device at the S60 end, so we want to expose
it on Linux too.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c
august huber [Mon, 28 Jun 2010 18:46:05 +0000]
USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c

Add VID/PID for Sierra Wireless 250U USB dongle to sierra.c
Allows use of 3G radio only

Signed-off-by: August Huber <gus@pbx.org>
Cc: Elina Pasheva <epasheva@sierrawireless.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: option: add support for 1da5:4518
Ömer Sezgin Ugurlu [Mon, 28 Jun 2010 16:01:58 +0000]
USB: option: add support for 1da5:4518

Signed-off-by: Omer Sezgin Ugurlu <omer.ugurlu@a-kent.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agodrm/i915: add pipe A force quirks to i915 driver
Jesse Barnes [Mon, 19 Jul 2010 20:53:12 +0000]
drm/i915: add pipe A force quirks to i915 driver

Ported over from the old UMS list.  Unfortunately they're still
necessary especially on older laptop platforms.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=22126.

Tested-by: Xavier <shiningxc@gmail.com>
Tested-by: Diego Escalante Urrelo <diegoe@gnome.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agodrm/i915: Fix panel fitting regression since 734b4157
Chris Wilson [Sat, 17 Jul 2010 11:43:20 +0000]
drm/i915: Fix panel fitting regression since 734b4157

The crtc mode fixup is run after the encoders adjust the mode to fit on
their output, so don't reset the mode!

Fixes:

  Bug 29057 - display corruption under 800x600 on netbook
              (1024x600) with 'Full Aspect' scaling
  https://bugs.freedesktop.org/show_bug.cgi?id=29057

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Xun Fang <xunx.fang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agoserial: fix rs485 for atmel_serial on avr32
Peter Huewe [Tue, 29 Jun 2010 17:35:39 +0000]
serial: fix rs485 for atmel_serial on avr32

This patch fixes a build failure [1-4] in the atmel_serial code introduced by
patch the patch ARM: 6092/1: atmel_serial: support for RS485
communications (e8faff7330a3501eafc9bfe5f4f15af444be29f5)

The build failure was caused by missing struct field and missing defines
for the avr32 board - the patch fixes this.

[1] http://kisskb.ellerman.id.au/kisskb/buildresult/2575242/ - first failure in linux-next, may 11th
[2] http://kisskb.ellerman.id.au/kisskb/buildresult/2816418/ - still exists as of today
[3] http://kisskb.ellerman.id.au/kisskb/buildresult/2617511/ - first failure in Linus' tree - May 20th - did really no one notice this?!
[4] http://kisskb.ellerman.id.au/kisskb/buildresult/2813956/ - still exists in Linus' tree as of today

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agodrm/i915: fix deadlock in fb teardown
Jesse Barnes [Tue, 20 Jul 2010 18:58:00 +0000]
drm/i915: fix deadlock in fb teardown

At module unload time we'll tear down the fbdev state.  We do so under
the struct mutex, so we shouldn't try to use the unlocked variant of
the GEM object unreference function or we may deadlock.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agodrm/i915: don't free non-existent compressed llb on ILK+
Jesse Barnes [Thu, 22 Jul 2010 15:12:20 +0000]
drm/i915: don't free non-existent compressed llb on ILK+

We should only free the compressed llb if we allocated it in the first
place otherwise we'll panic at unload time.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agoagp/intel: Use the correct mask to detect i830 aperture size.
Tim Gardner [Fri, 9 Jul 2010 20:48:50 +0000]
agp/intel: Use the correct mask to detect i830 aperture size.

BugLink: https://bugs.launchpad.net/bugs/597075

commit f1befe71fa7a79ab733011b045639d8d809924ad introduced a
regression when detecting aperture size of some i915 adapters, e.g.,
those on the Intel Q35 chipset.

The original report: https://bugzilla.kernel.org/show_bug.cgi?id=15733
The regression report: https://bugzilla.kernel.org/show_bug.cgi?id=16294

According to the specification found at
http://intellinuxgraphics.org/VOL_1_graphics_core.pdf, the PCI config
space register I830_GMCH_CTRL is a mirror of GMCH Graphics
Control. The correct macro for isolating the aperture size bits is
therefore I830_GMCH_GMS_MASK along with the attendant changes to the
case statement.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Tested-by: Kees Cook <kees.cook@canonical.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agodrm/i915: disable FBC when more than one pipe is active
Jesse Barnes [Fri, 23 Jul 2010 22:20:00 +0000]
drm/i915: disable FBC when more than one pipe is active

We're really supposed to do this to avoid trouble with underflows when
multiple planes are active.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=26987.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: fangxun <xunx.fang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agodrm/i915: Use the correct scanout alignment for fbcon.
Chris Wilson [Fri, 23 Jul 2010 22:32:05 +0000]
drm/i915: Use the correct scanout alignment for fbcon.

This fixes a potential modesetting error during boot with plymouth on
Broadwater and Crestline introduced with 9df47c. The framebuffer was
hard-coding an alignment of 64K, but the modesetting code required the
documented alignment of 128K. The result was that we would attempt to
unbind the pinned fbcon buffer, triggering an ERROR and ultimately
failing the mode change.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agodrm/i915: make sure eDP panel is turned on
Jesse Barnes [Thu, 22 Jul 2010 20:18:19 +0000]
drm/i915: make sure eDP panel is turned on

When enabling the eDP port, we need to make sure the panel is turned on
after training the link.  If we don't, it likely won't come back after
suspend or may not come up at all.

For unknown reasons, unlocking the panel regs before initiating a power
on sequence is necessary.  There are known bugs in the PCH panel
sequencing logic, apparently this is one possible workaround.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28739.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: "Paulo J. S. Silva" <pjssilva@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agodrm/i915: add PANEL_UNLOCK_REGS definition
Jesse Barnes [Thu, 22 Jul 2010 20:18:18 +0000]
drm/i915: add PANEL_UNLOCK_REGS definition

In some cases, unlocking the panel regs is safe and can help us avoid a
flickery, full mode set sequence.  So define the unlock key and use it.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agodrm/i915: Make G4X-style PLL search more permissive
Adam Jackson [Fri, 2 Jul 2010 20:43:30 +0000]
drm/i915: Make G4X-style PLL search more permissive

Fixes an Ironlake laptop with a 68.940MHz 1280x800 panel and 120MHz SSC
reference clock.

More generally, the 0.488% tolerance used before is just too tight to
reliably find a PLL setting.  I extracted the search algorithm and
modified it to find the dot clocks with maximum error over the valid
range for the given output type:

http://people.freedesktop.org/~ajax/intel_g4x_find_best_pll.c

This gave:

Worst dotclock for Ironlake DAC refclk is 350000kHz (error 0.00571)
Worst dotclock for Ironlake SL-LVDS refclk is 102321kHz (error 0.00524)
Worst dotclock for Ironlake DL-LVDS refclk is 219642kHz (error 0.00488)
Worst dotclock for Ironlake SL-LVDS SSC refclk is 84374kHz (error 0.00529)
Worst dotclock for Ironlake DL-LVDS SSC refclk is 183035kHz (error 0.00488)
Worst dotclock for G4X SDVO refclk is 267600kHz (error 0.00448)
Worst dotclock for G4X HDMI refclk is 334400kHz (error 0.00478)
Worst dotclock for G4X SL-LVDS refclk is 95571kHz (error 0.00449)
Worst dotclock for G4X DL-LVDS refclk is 224000kHz (error 0.00510)

Signed-off-by: Adam Jackson <ajax@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agodrm/i915: Clear any existing dither mode prior to enabling spatial dithering
Chris Wilson [Sun, 25 Jul 2010 22:09:13 +0000]
drm/i915: Clear any existing dither mode prior to enabling spatial dithering

We cannot the initial configuration set by the BIOS not to have a dither
mode enabled which conflicts with our enabling the Spatial Temporal 1
dither mode for PCH. In particular, the BIOS may either enable temporal
dithering or the Spatial Temporal 2 with the result that we enable pure
temporal dithering. Temporal dithering looks bad and is perceived as a
flicker.

Fixes:

  Bug 29248 - [Arrandale] Annoying flicker on internal panel, goes away
              after suspend to RAM
  https://bugs.freedesktop.org/show_bug.cgi?id=29248

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agodrm/i915: handle shared framebuffers when flipping
Jesse Barnes [Fri, 23 Jul 2010 19:03:37 +0000]
drm/i915: handle shared framebuffers when flipping

If a framebuffer is shared across CRTCs, the x,y position of one of them
is likely to be something other than the origin (e.g. for extended
desktop configs).  So calculate the offset at flip time so such
configurations can work.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28518.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Thomas M. <tmezzadra@gmail.com>
Tested-by: fangxun <xunx.fang@intel.com>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 26 Jul 2010 15:20:38 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.text
  ARM: 6263/1: ns9xxx: fix FTBFS for zImage
  ARM: 6262/1: arm/clps711x: fix debug macro compilation failure
  ARM: 6261/1: arm/shark: fix debug macro compilation failure
  ARM: 6260/1: arm/plat-spear: fix debug macro compilation failure
  ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failure
  ARM: 6258/1: arm/h720x: fix debug macro compilation failure
  ARM: 6233/1: Delete a wrong redundant right parenthesis
  ARM: 6230/1: fix nuc900 touchscreen clk definition bug
  [ARM] pxa: fix incorrect CONFIG_CPU_PXA27x to CONFIG_PXA27x
  [ARM] pxa/colibri-pxa300: fix AC97 init
  [ARM] pxa: fix incorrect order of AC97 reset pin configs
  [ARM] pxa: fix frequency scaling for pcmcia/pxa2xx_base
  [ARM] pxa: cpufreq-pxa2xx: fix DRI recomputation routine
  [ARM] pxa/corgi: fix MMC/SD card detection failure

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Mon, 26 Jul 2010 15:20:16 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  tpm_tis: fix subsequent suspend failures

10 years agoMerge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Mon, 26 Jul 2010 15:18:18 +0000]
Merge branch 'kvm-updates/2.6.35' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Use kmalloc() instead of vmalloc() for KVM_[GS]ET_MSR
  KVM: MMU: fix conflict access permissions in direct sp

10 years agoquiesce EDAC initialisation on desktop/mobile i7
Daniel J Blueman [Fri, 23 Jul 2010 22:16:52 +0000]
quiesce EDAC initialisation on desktop/mobile i7

Don't print failure to detect Core i7 EDAC facilities to the console at
boot time, most often occurring on Core i7 desktops and laptops.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Mon, 26 Jul 2010 15:10:00 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM
  ACPI: create "processor.bm_check_disable" boot param
  ACPI: skip checking BM_STS if the BIOS doesn't ask for it
  ACPI: fix unused function warning
  ACPI: processor: fix processor_physically_present on UP
  ACPI video: fix string mismatch for Sony SR290 laptop
  ACPI battery: don't invoke power_supply_changed twice when battery is hot-added
  ACPI: handle systems which asynchoronously enable ACPI mode

10 years agoDriver-core: Always create class directories for classses that support namespaces.
Eric W. Biederman [Sun, 25 Jul 2010 05:43:35 +0000]
Driver-core: Always create class directories for classses that support namespaces.

This fixes the regression in 2.6.35-rcX where bluetooth network devices
would fail to be deleted from sysfs, causing their destruction and
recreation to fail.  In addition this fixes the mac80211_hwsim driver
where it would leave around sysfs files when the driver was removed.

This problem is discussed at
  https://bugzilla.kernel.org/show_bug.cgi?id=16257

The reason for the regression is that the network namespace support
added to sysfs expects and requires that network devices be put in
directories that can contain only network devices.

Today get_device_parent almost provides that guarantee for all class
devices, except for a specific exception when the parent of a class
devices is a class device.  It would be nice to simply remove that
arguably incorrect special case, but apparently the input devices depend
on it being there.  So I have only removed it for class devices with
network namespace support.  Which today are the network devices.

It has been suggested that a better fix would be to change the parent
device from a class device to a bus device, which in the case of the
bluetooth driver would change /sys/class/bluetooth to /sys/bus/bluetoth,
I can not see how we would avoid significant userspace breakage if we
were to make that change.

Adding an extra directory in the path to the device will also be
userspace visible but it is much less likely to break things.
Everything is still accessible from /sys/class (for example), and it
fixes two bugs.  Adding an extra directory fixes a 3 year old regression
introduced with the new sysfs layout that makes it impossible to rename
bnep0 network devices to names that conflict with hci device attributes
like hci_revsion.  Adding an additional directory removes the new
failure modes introduced by the network namespace code.

If it weren't for the regession in the renaming of network devices I
would figure out how to just make the sysfs code deal with this
configuration of devices.

In summary this patch fixes regressions by changing:
"/sys/class/bluetooth/hci0/bnep0" to "/sys/class/bluetooth/hci0/net/bnep0".

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agovirtio: fix oops on OOM
Michael S. Tsirkin [Mon, 26 Jul 2010 07:25:30 +0000]
virtio: fix oops on OOM

virtio ring was changed to return an error code on OOM,
but one caller was missed and still checks for vq->vring.num.
The fix is just to check for <0 error code.

Long term it might make sense to change goto add_head to
just return an error on oom instead, but let's apply
a minimal fix for 2.6.35.

Reported-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Chris Mason <chris.mason@oracle.com>
Cc: stable@kernel.org # .34.x
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoInput: RX51 keymap - fix recent compile breakage
Dmitry Torokhov [Mon, 26 Jul 2010 08:12:37 +0000]
Input: RX51 keymap - fix recent compile breakage

Commit 3fea60261e73 ("Input: twl40300-keypad - fix handling of "all
ground" rows") broke compilation as I managed to use non-existent
keycodes.

Reported-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.text
Uwe Kleine-König [Sat, 24 Jul 2010 08:53:20 +0000]
ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.text

qnap_tsx1x_register_flash is only called by qnap_ts219_init and
qnap_ts41x_init which both live in .init.text, too.  So the move is OK.

This fixes the following warning in kirkwood_defconfig:
WARNING: vmlinux.o(.text+0x9334): Section mismatch in reference from the function qnap_tsx1x_register_flash() to the variable .init.data:qnap_tsx1x_spi_slave_info
The function qnap_tsx1x_register_flash() references
the variable __initdata qnap_tsx1x_spi_slave_info.
This is often because qnap_tsx1x_register_flash lacks a __initdata
annotation or the annotation of qnap_tsx1x_spi_slave_info is wrong.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 6263/1: ns9xxx: fix FTBFS for zImage
Uwe Kleine-König [Fri, 23 Jul 2010 09:46:52 +0000]
ARM: 6263/1: ns9xxx: fix FTBFS for zImage

the different putc variants used an initialized local static variable
which is broken since

5de813b (ARM: Eliminate decompressor -Dstatic= PIC hack)

This needs to be initialized at runtime and so needs to be global.
While at it give it a better name.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 6262/1: arm/clps711x: fix debug macro compilation failure
Jeremy Kerr [Thu, 22 Jul 2010 15:34:34 +0000]
ARM: 6262/1: arm/clps711x: fix debug macro compilation failure

We need mach/hardware.h for CLPS7111_VIRT_BASE.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 6261/1: arm/shark: fix debug macro compilation failure
Jeremy Kerr [Thu, 22 Jul 2010 15:34:34 +0000]
ARM: 6261/1: arm/shark: fix debug macro compilation failure

We need a waituart macro.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 6260/1: arm/plat-spear: fix debug macro compilation failure
Jeremy Kerr [Thu, 22 Jul 2010 15:34:34 +0000]
ARM: 6260/1: arm/plat-spear: fix debug macro compilation failure

mov rx, =<immediate> isn't valid, use #<immediate> instead.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 6259/1: arm/ns9xxx: fix debug macro compilation failure
Jeremy Kerr [Thu, 22 Jul 2010 15:34:34 +0000]
ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failure

We need asm/memory.h for NS9XXX_CSxSTAT_PHYS (via mach/memory.h).

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 6258/1: arm/h720x: fix debug macro compilation failure
Jeremy Kerr [Thu, 22 Jul 2010 15:34:34 +0000]
ARM: 6258/1: arm/h720x: fix debug macro compilation failure

IO_BASE shoule be IO_VIRT, and IO_START should be IO_PHYS. We also need
mach/hardware.h for these definitions.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agotpm_tis: fix subsequent suspend failures
Rajiv Andrade [Wed, 23 Jun 2010 19:18:56 +0000]
tpm_tis: fix subsequent suspend failures

Fix subsequent suspends by issuing tpm_continue_selftest during resume.
Otherwise, the tpm chip seems to be not fully initialized and will reject
the save state command during suspend, thus preventing the whole system
to suspend.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16256

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Debora Velarde <debora@linux.vnet.ibm.com>
Cc: David Safford <safford@watson.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <jmorris@namei.org>

10 years agoMerge branch 'bugzilla-16396' into release
Len Brown [Sun, 25 Jul 2010 03:26:22 +0000]
Merge branch 'bugzilla-16396' into release

10 years agoACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM
Rafael J. Wysocki [Fri, 23 Jul 2010 20:59:09 +0000]
ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM

Commit 2a6b69765ad794389f2fc3e14a0afa1a995221c2
(ACPI: Store NVS state even when entering suspend to RAM) caused the
ACPI suspend code save the NVS area during suspend and restore it
during resume unconditionally, although it is known that some systems
need to use acpi_sleep=s4_nonvs for hibernation to work.  To allow
the affected systems to avoid saving and restoring the NVS area
during suspend to RAM and resume, introduce kernel command line
option acpi_sleep=nonvs and make acpi_sleep=s4_nonvs work as its
alias temporarily (add acpi_sleep=s4_nonvs to the feature removal
file).

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16396 .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: tomas m <tmezzadra@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Fri, 23 Jul 2010 20:26:16 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  vmlinux.lds: fix .data..init_task output section (fix popwerpc boot)
  powerpc: Fix erroneous lmb->memblock conversions
  powerpc/mm: Add some debug output when hash insertion fails
  powerpc/mm: Fix bugs in huge page hashing
  powerpc/mm: Move around testing of _PAGE_PRESENT in hash code
  powerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge
  powerpc/kexec: Fix boundary case for book-e kexec memory limits

10 years agoMerge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuil...
Linus Torvalds [Fri, 23 Jul 2010 20:25:00 +0000]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild-2.6

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  nconfig: Fix segfault when help contains special characters
  kbuild: Fix make rpm
  kbuild: Make the setlocalversion script POSIX-compliant

10 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 23 Jul 2010 20:24:02 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available
  perf annotate: Fix handling of goto labels that are valid hex numbers
  tracing: Properly align linker defined symbols
  perf symbols: Fix directory descriptor leaking
  perf: Fix various display bugs with parent filtering

10 years agonconfig: Fix segfault when help contains special characters
Stephen Boyd [Fri, 23 Jul 2010 07:04:14 +0000]
nconfig: Fix segfault when help contains special characters

nconfig segfaults when help text contains the character '%'. For a quick
example, navigate to the kernel compression options and get the help for
bzip2. Doing so triggers a call to mvwprintw() with a string containing
'%' and no extra arguments to fill in the specifier's value. Fix this
case by printing the literal string retrieved from the kconfig.

 #0  0x00002b52b6b11d83 in vfprintf () from /lib/libc.so.6
 #1  0x00002b52b6bad010 in __vsnprintf_chk () from /lib/libc.so.6
 #2  0x00002b52b623991b in _nc_printf_string () from
 /lib/libncursesw.so.5
 #3  0x00002b52b6234cff in vwprintw () from /lib/libncursesw.so.5
 #4  0x00002b52b6234db9 in mvwprintw () from /lib/libncursesw.so.5
 #5  0x00000000004151d8 in fill_window (win=0x21b64c0,
     text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and
     speed is intermediate.\nDecompression speed is slowest among the
     three.  The kernel\nsize is about 10% smaller with bzip2, in
     comparison to gzip.\nBzip2 us"...)
     at scripts/kconfig/nconf.gui.c:229
 #6  0x0000000000416335 in show_scroll_win (main_window=0x21a5630,
         title=0x157fa30 "Bzip2",
      text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression
      ratio and speed is intermediate.\nDecompression speed is
      slowest among the three.  The kernel\nsize is about 10%
      smaller with bzip2, in comparison to gzip.\nBzip2 us"...)
     at scripts/kconfig/nconf.gui.c:535
 #7  0x00000000004055b2 in show_help (menu=0x157f9d0)
         at scripts/kconfig/nconf.c:1257
 #8  0x0000000000405897 in conf_choice (menu=0x157f130)
      at scripts/kconfig/nconf.c:1321
 #9  0x0000000000405326 in conf (menu=0x157d130) at
      scripts/kconfig/nconf.c:1208
 #10 0x00000000004052e8 in conf (menu=0xb434a0) at
      scripts/kconfig/nconf.c:1203
 #11 0x0000000000406092 in main (ac=2, av=0x7fff96a93c38)

Cc: Michal Marek <mmarek@suse.cz>
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

10 years agoKVM: Use kmalloc() instead of vmalloc() for KVM_[GS]ET_MSR
Avi Kivity [Thu, 22 Jul 2010 20:24:52 +0000]
KVM: Use kmalloc() instead of vmalloc() for KVM_[GS]ET_MSR

We don't need more than a page, and vmalloc() is slower (much
slower recently due to a regression).

Signed-off-by: Avi Kivity <avi@redhat.com>

10 years agoKVM: MMU: fix conflict access permissions in direct sp
Xiao Guangrong [Wed, 30 Jun 2010 08:02:45 +0000]
KVM: MMU: fix conflict access permissions in direct sp

In no-direct mapping, we mark sp is 'direct' when we mapping the
guest's larger page, but its access is encoded form upper page-struct
entire not include the last mapping, it will cause access conflict.

For example, have this mapping:
        [W]
      / PDE1 -> |---|
  P[W]          |   | LPA
      \ PDE2 -> |---|
        [R]

P have two children, PDE1 and PDE2, both PDE1 and PDE2 mapping the
same lage page(LPA). The P's access is WR, PDE1's access is WR,
PDE2's access is RO(just consider read-write permissions here)

When guest access PDE1, we will create a direct sp for LPA, the sp's
access is from P, is W, then we will mark the ptes is W in this sp.

Then, guest access PDE2, we will find LPA's shadow page, is the same as
PDE's, and mark the ptes is RO.

So, if guest access PDE1, the incorrect #PF is occured.

Fixed by encode the last mapping access into direct shadow page

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

10 years agoMerge commit 'kumar/merge' into merge
Benjamin Herrenschmidt [Fri, 23 Jul 2010 03:46:21 +0000]
Merge commit 'kumar/merge' into merge

10 years agovmlinux.lds: fix .data..init_task output section (fix popwerpc boot)
Sam Ravnborg [Tue, 13 Jul 2010 09:39:42 +0000]
vmlinux.lds: fix .data..init_task output section (fix popwerpc boot)

The .data..init_task output section was missing
a load offset causing a popwerpc target to fail to boot.

Sean MacLennan tracked it down to the definition of
INIT_TASK_DATA_SECTION().

There are only two users of INIT_TASK_DATA_SECTION()
in the kernel today: cris and popwerpc.
cris do not support relocatable kernels and is thus not
impacted by this change.

Fix INIT_TASK_DATA_SECTION() to specify load offset like
all other output sections.

Reported-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Fix erroneous lmb->memblock conversions
Benjamin Herrenschmidt [Fri, 23 Jul 2010 00:35:52 +0000]
powerpc: Fix erroneous lmb->memblock conversions

Oooops... we missed these. We incorrectly converted strings
used when parsing the device-tree on pseries, thus breaking
access to drconf memory and hotplug memory.

While at it, also revert some variable names that represent
something the FW calls "lmb" and thus don't need to be converted
to "memblock".

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

10 years agopowerpc/mm: Add some debug output when hash insertion fails
Benjamin Herrenschmidt [Fri, 23 Jul 2010 00:31:13 +0000]
powerpc/mm: Add some debug output when hash insertion fails

This adds some debug output to our MMU hash code to print out some
useful debug data if the hypervisor refuses the insertion (which
should normally never happen).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

10 years agopowerpc/mm: Fix bugs in huge page hashing
Benjamin Herrenschmidt [Thu, 22 Jul 2010 23:02:27 +0000]
powerpc/mm: Fix bugs in huge page hashing

There's a couple of nasty bugs lurking in our huge page hashing code.

First, we don't check the access permission atomically with setting
the _PAGE_BUSY bit, which means that the PTE value we end up using
for the hashing might be different than the one we have checked
the access permissions for.

We've seen cases where that leads us to try to use an invalidated
PTE for hashing, causing all sort of "interesting" issues.

Then, we also failed to set _PAGE_DIRTY on a write access.

Finally, a minor tweak but we should return 0 when we find the
PTE busy, in order to just re-execute the access, rather than 1
which means going to do_page_fault().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

10 years agopowerpc/mm: Move around testing of _PAGE_PRESENT in hash code
Benjamin Herrenschmidt [Thu, 22 Jul 2010 22:53:23 +0000]
powerpc/mm: Move around testing of _PAGE_PRESENT in hash code

Instead of adding _PAGE_PRESENT to the access permission mask
in each low level routine independently, we add it once from
hash_page().

We also move the preliminary access check (the racy one before
the PTE is locked) up so it applies to the huge page case. This
duplicates code in __hash_page_huge() which we'll remove in a
subsequent patch to fix a race in there.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge
Anton Blanchard [Wed, 14 Jul 2010 19:31:48 +0000]
powerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge

If the hypervisor gives us an error on a hugepage insert we panic. The
normal page code already handles this by returning an error instead and we end
calling low_hash_fault which will just kill the task if possible.

The patch below does a similar thing for the hugepage case.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agoMerge branch 'misc' into release
Len Brown [Thu, 22 Jul 2010 22:19:12 +0000]
Merge branch 'misc' into release

10 years agoMerge branch 'bugzilla-15886' into release
Len Brown [Thu, 22 Jul 2010 22:18:28 +0000]
Merge branch 'bugzilla-15886' into release

10 years agoMerge branch 'bugzilla-102904-workaround' into release
Len Brown [Thu, 22 Jul 2010 22:18:18 +0000]
Merge branch 'bugzilla-102904-workaround' into release

10 years agoMerge branch 'bugzilla-16244' into release
Len Brown [Thu, 22 Jul 2010 22:18:05 +0000]
Merge branch 'bugzilla-16244' into release

10 years agoMerge branch 'bugzilla-16271' into release
Len Brown [Thu, 22 Jul 2010 22:17:39 +0000]
Merge branch 'bugzilla-16271' into release

10 years agoMerge branch 'bugzilla-16357' into release
Len Brown [Thu, 22 Jul 2010 22:17:33 +0000]
Merge branch 'bugzilla-16357' into release

10 years agoACPI: create "processor.bm_check_disable" boot param
Len Brown [Thu, 22 Jul 2010 21:23:10 +0000]
ACPI: create "processor.bm_check_disable" boot param

processor.bm_check_disable=1" prevents Linux from checking BM_STS
before entering C3-type cpu power states.

This may be useful for a system running acpi_idle
where the BIOS exports FADT C-states, _CST IO C-states,
or _CST FFH C-states with the BM_STS bit set;
while configuring the chipset to set BM_STS
more frequently than perhaps is optimal.

Note that such systems may have been developed
using a tickful OS that would quickly clear BM_STS,
rather than a tickless OS that may go for some time
between checking and clearing BM_STS.

Note also that an alternative for newer systems
is to use the intel_idle driver, which always
ignores BM_STS, relying Linux device drivers
to register constraints explicitly via PM_QOS.

https://bugzilla.kernel.org/show_bug.cgi?id=15886

Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoACPI: skip checking BM_STS if the BIOS doesn't ask for it
Len Brown [Thu, 22 Jul 2010 20:54:27 +0000]
ACPI: skip checking BM_STS if the BIOS doesn't ask for it

It turns out that there is a bit in the _CST for Intel FFH C3
that tells the OS if we should be checking BM_STS or not.

Linux has been unconditionally checking BM_STS.
If the chip-set is configured to enable BM_STS,
it can retard or completely prevent entry into
deep C-states -- as illustrated by turbostat:

http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/

ref: Intel Processor Vendor-Specific ACPI Interface Specification
table 4 "_CST FFH GAS Field Encoding"
Bit 1: Set to 1 if OSPM should use Bus Master avoidance for this C-state

https://bugzilla.kernel.org/show_bug.cgi?id=15886

Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoperf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available
Conny Seidel [Tue, 6 Jul 2010 15:39:43 +0000]
perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available

make version 3.80 doesn't support "else ifdef" on the same line, also it
doesn't support unindented nested constructs.

Build fails with:
Makefile:608: Extraneous text after `else' directive
Makefile:611: *** only one `else' per conditional.  Stop.

This patch fixes the build for make 3.80.

Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1278430783-17259-1-git-send-email-conny.seidel@amd.com>
Signed-off-by: Conny Seidel <conny.seidel@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

10 years agoLinux 2.6.35-rc6
Linus Torvalds [Thu, 22 Jul 2010 19:13:38 +0000]
Linux 2.6.35-rc6

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Thu, 22 Jul 2010 18:46:15 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - relax capability ID checks on newer hardware
  Input: twl40300-keypad - fix handling of "all ground" rows
  Input: gamecon - reference correct pad in gc_psx_command()
  Input: gamecon - reference correct input device in NES mode
  Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'
  Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table
  Input: qt2160 - rename kconfig symbol name

10 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 22 Jul 2010 18:45:57 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add quirk to make HP DV5000 laptop resume
  drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl
  Fix ttm_page_alloc.c build breakage
  drm/radeon/kms: fix legacy LVDS dpms sequence
  drm/radeon/kms: drop taking lock around crtc lookup.

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Thu, 22 Jul 2010 18:45:23 +0000]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: talitos - fix bug in sg_copy_end_to_buffer

10 years agoMerge branch 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 22 Jul 2010 18:45:02 +0000]
Merge branch 'x86/auditsyscall' of git://git./linux/kernel/git/frob/linux-2.6-roland

* 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: auditsyscall: fix fastpath return value after reschedule

10 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Thu, 22 Jul 2010 18:44:26 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function
  debug_core,kdb: fix kgdb_connected bit set in the wrong place
  Fix merge regression from external kdb to upstream kdb
  repair gdbstub to match the gdbserial protocol specification
  kdb: break out of kdb_ll() when command is terminated

10 years agopowerpc/kexec: Fix boundary case for book-e kexec memory limits
Kumar Gala [Thu, 22 Jul 2010 18:30:44 +0000]
powerpc/kexec: Fix boundary case for book-e kexec memory limits

The KEXEC_*_MEMORY_LIMITs are inclusive addresses.  We define them as
2Gs as that is what we allow mapping via TLBs.  However, this should be
2G - 1 to be inclusive, otherwise if we have >2G of memory in a system
we fail to boot properly via kexec.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agoperf annotate: Fix handling of goto labels that are valid hex numbers
Arnaldo Carvalho de Melo [Thu, 22 Jul 2010 17:04:13 +0000]
perf annotate: Fix handling of goto labels that are valid hex numbers

When parsing the objdump disassembly output we can have goto labels that
are valid hex numbers and thus get confused with lines with machine
code.

Handle the common case of a label that has nothing after it and other
cases where there is just source code by validating the resulting "ip".

It is still possible that we find goto labels that are in the function
address range, but only if they are located before the real address we
should be OK.

A change in the objdump output to have a clear marker separating
addresses from the disassembly would come handy, but we would still have
to deal with older versions.

Reported-by: Gleb Natapov <gleb@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100722170541.GF17631@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

10 years agoCIFS: Fix a malicious redirect problem in the DNS lookup code
David Howells [Thu, 22 Jul 2010 11:53:18 +0000]
CIFS: Fix a malicious redirect problem in the DNS lookup code

Fix the security problem in the CIFS filesystem DNS lookup code in which a
malicious redirect could be installed by a random user by simply adding a
result record into one of their keyrings with add_key() and then invoking a
CIFS CFS lookup [CVE-2010-2524].

This is done by creating an internal keyring specifically for the caching of
DNS lookups.  To enforce the use of this keyring, the module init routine
creates a set of override credentials with the keyring installed as the thread
keyring and instructs request_key() to only install lookup result keys in that
keyring.

The override is then applied around the call to request_key().

This has some additional benefits when a kernel service uses this module to
request a key:

 (1) The result keys are owned by root, not the user that caused the lookup.

 (2) The result keys don't pop up in the user's keyrings.

 (3) The result keys don't come out of the quota of the user that caused the
     lookup.

The keyring can be viewed as root by doing cat /proc/keys:

2a0ca6c3 I-----     1 perm 1f030000     0     0 keyring   .dns_resolver: 1/4

It can then be listed with 'keyctl list' by root.

# keyctl list 0x2a0ca6c3
1 key in keyring:
726766307: --alswrv     0     0 dns_resolver: foo.bar.com

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoARM: 6233/1: Delete a wrong redundant right parenthesis
wanzongshun [Mon, 19 Jul 2010 03:06:12 +0000]
ARM: 6233/1: Delete a wrong redundant right parenthesis

Delete a wrong redundant right parenthesis in
arch/arm/mach-footbridge/common.c

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 6230/1: fix nuc900 touchscreen clk definition bug
wanzongshun [Sun, 18 Jul 2010 14:10:07 +0000]
ARM: 6230/1: fix nuc900 touchscreen clk definition bug

This patch is to fix nuc900 touchscreen clk definition bug,the .dev_id's
name should be 'nuc900-ts', it should be the same to pdev.name. or else,
the touchscreen driver will be not working well due to clock engine disabled.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agodrm/radeon/kms: add quirk to make HP DV5000 laptop resume
Alex Deucher [Thu, 22 Jul 2010 03:54:35 +0000]
drm/radeon/kms: add quirk to make HP DV5000 laptop resume

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29062

Reported-by:  Andres Cimmarusti <acimmarusti@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agoInput: synaptics - relax capability ID checks on newer hardware
Dmitry Torokhov [Wed, 21 Jul 2010 07:01:19 +0000]
Input: synaptics - relax capability ID checks on newer hardware

Older firmwares fixed the middle byte of the Synaptics capabilities
query to 0x47, but starting with firmware 7.5 the middle byte
represents submodel ID, sometimes also called "dash number".

Reported-and-tested-by: Miroslav Šulc <fordfrog@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

10 years agox86: auditsyscall: fix fastpath return value after reschedule
Roland McGrath [Thu, 22 Jul 2010 00:44:12 +0000]
x86: auditsyscall: fix fastpath return value after reschedule

In the CONFIG_AUDITSYSCALL fast-path for x86 64-bit system calls,
we can pass a bad return value and/or error indication for the
system call to audit_syscall_exit().  This happens when
TIF_NEED_RESCHED was set as the system call returned, so we went
out to schedule() and came back to the exit-audit fast-path.  The
fix is to reload the user return value register from the pt_regs
before using it for audit_syscall_exit().

Both the 32-bit kernel's fast path and the 64-bit kernel's 32-bit
system call fast paths work slightly differently, so that they
always leave the fast path entirely to reschedule and don't return
there, so they don't have the analogous bugs.

Reported-by: Alexander Viro <aviro@redhat.com>
Signed-off-by: Roland McGrath <roland@redhat.com>

10 years agosysrq,kdb: Use __handle_sysrq() for kdb's sysrq function
Jason Wessel [Thu, 22 Jul 2010 00:27:07 +0000]
sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function

The kdb code should not toggle the sysrq state in case an end user
wants to try and resume the normal kernel execution.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

10 years agodebug_core,kdb: fix kgdb_connected bit set in the wrong place
Jason Wessel [Thu, 22 Jul 2010 00:27:07 +0000]
debug_core,kdb: fix kgdb_connected bit set in the wrong place

Immediately following an exit from the kdb shell the kgdb_connected
variable should be set to zero, unless there are breakpoints planted.
If the kgdb_connected variable is not zeroed out with kdb, it is
impossible to turn off kdb.

This patch is merely a work around for now, the real fix will check
for the breakpoints.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

10 years agoFix merge regression from external kdb to upstream kdb
Jason Wessel [Thu, 22 Jul 2010 00:27:06 +0000]
Fix merge regression from external kdb to upstream kdb

In the process of merging kdb to the mainline, the kdb lsmod command
stopped printing the base load address of kernel modules.  This is
needed for using kdb in conjunction with external tools such as gdb.

Simply restore the functionality by adding a kdb_printf for the base
load address of the kernel modules.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

10 years agorepair gdbstub to match the gdbserial protocol specification
Jason Wessel [Thu, 22 Jul 2010 00:27:05 +0000]
repair gdbstub to match the gdbserial protocol specification

The gdbserial protocol handler should return an empty packet instead
of an error string when ever it responds to a command it does not
implement.

The problem cases come from a debugger client sending
qTBuffer, qTStatus, qSearch, qSupported.

The incorrect response from the gdbstub leads the debugger clients to
not function correctly.  Recent versions of gdb will not detach correctly as a result of this behavior.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>

10 years agokdb: break out of kdb_ll() when command is terminated
Martin Hicks [Thu, 22 Jul 2010 00:27:05 +0000]
kdb: break out of kdb_ll() when command is terminated

Without this patch the "ll" linked-list traversal command won't
terminate when you hit q/Q.

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

10 years agodrm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl
Alex Deucher [Wed, 21 Jul 2010 18:05:35 +0000]
drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl

Return the crtc_id, not the counter value.  They are not
necessarily the same.

Cc: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agoFix ttm_page_alloc.c build breakage
Luck, Tony [Wed, 21 Jul 2010 17:15:39 +0000]
Fix ttm_page_alloc.c build breakage

The commit 1e8655f87333def92bb8215b423adc65403b08a5
    drm/ttm: Fix build on architectures without AGP

looks at TTM_HAS_AGP before it has been set in ttm_bo_driver.h

Move the conditional inclusion of <asm/agp.h> *after* we have included
ttm_bo_driver.h

Signed-of-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agodrm/radeon/kms: fix legacy LVDS dpms sequence
Alex Deucher [Wed, 21 Jul 2010 23:37:21 +0000]
drm/radeon/kms: fix legacy LVDS dpms sequence

Add delay after turning off the LVDS encoder.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=16389

Tested-by: Jan Kreuzer <kontrollator@gmx.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agodrm/radeon/kms: drop taking lock around crtc lookup.
Dave Airlie [Wed, 21 Jul 2010 23:57:13 +0000]
drm/radeon/kms: drop taking lock around crtc lookup.

We only add/remove crtcs at driver load, you cannot remove when
the GPU is running a CS packet since the fd is open, when
GPU hotplugging on radeons actually is needed all this locking
needs a review and I've started re-working kms core locking to deal
with this better. But for now avoid long delays in CS processing when
hotplug detect is happening in a different thread.

this fixes a regression introduced with hotplug detection.

Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agoMerge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
Linus Torvalds [Wed, 21 Jul 2010 16:31:15 +0000]
Merge branch 'urgent' of git://git./linux/kernel/git/brodo/pcmcia-2.6

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix 'driver ... did not release config properly' warning

10 years agoMerge branch 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev
Linus Torvalds [Wed, 21 Jul 2010 16:30:59 +0000]
Merge branch 'shrinker' of git://git./linux/kernel/git/dgc/xfsdev

* 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
  mm: add context argument to shrinker callback to remaining shrinkers

10 years agoMerge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Wed, 21 Jul 2010 16:29:39 +0000]
Merge branch 'fix/asoc' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Select wm_hubs automatically for WM8994
  ASoC: Remove duplicate AUX definition from WM8776
  ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_register
  ASoC: wm8727: add a missing return in wm8727_platform_probe
  ASoC: fsi: fixup wrong value setting order of TDM
  ASoC: fsi: fixup clock inversion operation

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 21 Jul 2010 16:28:50 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  math-emu: correct test for downshifting fraction in _FP_FROM_INT()
  perf: Add DWARF register lookup for sparc
  MAINTAINERS: Add SBUS driver path to sparc entry.
  drivers/sbus: Remove unnecessary casts of private_data
  sparc: remove homegrown L1_CACHE_ALIGN macro
  sparc64: fix the build error due to smp_kgdb_capture_client()
  sparc64: Fix maybe_change_configuration() PCR setting.
  arch/sparc/kernel: Eliminate what looks like a NULL pointer dereference
  sparc64: Update defconfig.
  sunsu: Fix use after free in su_remove().
  sunserial: Don't call add_preferred_console() when console= is specified.
  sparc32: Kill none_mask, it's bogus.