11 years agoperf tools: Allow building for ARM
Jamie Iles [Fri, 11 Dec 2009 12:20:09 +0000]
perf tools: Allow building for ARM

Add definitions of rmb() and cpu_relax() and include the ARM
unistd.h header. The __kuser_memory_barrier helper in the helper
page is used to provide the correct memory barrier depending on
the CPU type.

[ The rmb() will work on v6 and v7, segfault on v5. Dynamic
  detection to add v5 support will be added later. ]

Signed-off-by: Jamie Iles <jamie.iles@picochip.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mikael Pettersson <mikpe@it.uu.se>
LKML-Reference: <1260534009-5394-1-git-send-email-jamie.iles@picochip.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agohw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value
Frederic Weisbecker [Fri, 11 Dec 2009 10:58:42 +0000]
hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value

While converting modify_user_hw_breakpoint() return value, we
forgot to handle the off-case. It's not returning a pointer
anymore.

This solves the build warning reported by Stephen Rothwell against
linux-next.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1260529122-6260-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Prasad <prasad@linux.vnet.ibm.com>

11 years agoperf tools: Allow cross compiling
Jamie Iles [Fri, 11 Dec 2009 09:21:00 +0000]
perf tools: Allow cross compiling

For embedded platforms, we want to be able to build the perf
tools on a build machine to run on a different arch. This patch
allows $CROSS_COMPILE to set the cross compiler.

Additionally, if NO_LIBPERL is set, then don't use perl include
paths as they will be for the host arch.

Signed-off-by: Jamie Iles <jamie.iles@picochip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1260523260-15694-2-git-send-email-jamie.iles@picochip.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE
Li Zefan [Fri, 11 Dec 2009 07:45:50 +0000]
tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE

For slab, if CONFIG_KMEMTRACE and CONFIG_DEBUG_SLAB are not set,
__do_kmalloc() will not track callers:

 # ./perf record -f -a -R -e kmem:kmalloc
 ^C
 # ./perf trace
 ...
          perf-2204  [000]   147.376774: kmalloc: call_site=c0529d2d ...
          perf-2204  [000]   147.400997: kmalloc: call_site=c0529d2d ...
          Xorg-1461  [001]   147.405413: kmalloc: call_site=0 ...
          Xorg-1461  [001]   147.405609: kmalloc: call_site=0 ...
       konsole-1776  [001]   147.405786: kmalloc: call_site=0 ...

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <4B21F8AE.6020804@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING
Li Zefan [Fri, 11 Dec 2009 07:45:30 +0000]
tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING

Define kmem_trace_alloc_{,node}_notrace() if CONFIG_TRACING is
enabled, otherwise perf-kmem will show wrong stats ifndef
CONFIG_KMEM_TRACE, because a kmalloc() memory allocation may
be traced by both trace_kmalloc() and trace_kmem_cache_alloc().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <4B21F89A.7000801@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agox86, perf events: Check if we have APIC enabled
Cyrill Gorcunov [Thu, 10 Dec 2009 16:56:34 +0000]
x86, perf events: Check if we have APIC enabled

Ralf Hildebrandt reported this boot warning:

| Running a vanilla 2.6.32 as Xen DomU, I'm getting:
|
| [    0.000999] CPU: Physical Processor ID: 0
| [    0.000999] CPU: Processor Core ID: 1
| [    0.000999] Performance Events: AMD PMU driver.
| [    0.000999] ------------[ cut here ]------------
| [    0.000999] WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_dummy

So we need to check if APIC functionality is available, and
not just in the P6 driver but elsewhere as well.

Reported-by: Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091210165634.GF5086@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Fix variable initialization in other codepaths
Xiao Guangrong [Thu, 10 Dec 2009 09:08:54 +0000]
perf_event: Fix variable initialization in other codepaths

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B20BAA6.7010609@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf kmem: Fix unused argument build warning
Ingo Molnar [Thu, 10 Dec 2009 07:43:34 +0000]
perf kmem: Fix unused argument build warning

Fix:

 builtin-kmem.c: In function 'parse_caller_opt':
 builtin-kmem.c:690: error: unused parameter 'arg'
 builtin-kmem.c: In function 'parse_alloc_opt':
 builtin-kmem.c:697: error: unused parameter 'arg'

Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4B20A195.8030106@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf symbols: perf_header__read_build_ids() offset'n'size should be u64
Arnaldo Carvalho de Melo [Wed, 9 Dec 2009 22:09:38 +0000]
perf symbols: perf_header__read_build_ids() offset'n'size should be u64

As off_t is a long, so breaking things on 32-bit land. Now
buildids work on 32-bit land.

[root@ana ~]# uname -a
Linux ana.ghostprotocols.net 2.6.31.6-162.fc12.i686 #1 SMP Fri
Dec 4 01:09:09 EST 2009 i686 i686 i386 GNU/Linux [root@ana ~]#
perf buildid-list | tail -5
136ee6792ba2ae57870ecd87369f4ae3194d5b27 /lib/libreadline.so.6.0
d202dcb1ad48d140065783657d37ae3f2d9ab83f /usr/bin/gdb
0a56c0c00dcc2e9e581ae9997f31957c9c4671df
/usr/lib/libdwarf.so.0.0
5f9e6ac95241cbb3227608e0ff2a2e0cbbe72439 /home/acme/bin/perf
925d19eccc2ddb1c9d74dd178a011426f1b124a8 /bin/sleep [root@ana ~]#

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260396578-19116-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf symbols: dsos__read_build_ids() should read both user and kernel buildids
Arnaldo Carvalho de Melo [Wed, 9 Dec 2009 22:09:37 +0000]
perf symbols: dsos__read_build_ids() should read both user and kernel buildids

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260396578-19116-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf tools: Align long options which have no short forms
Li Zefan [Thu, 10 Dec 2009 07:22:17 +0000]
perf tools: Align long options which have no short forms

Before:

$ ./perf kmem
...
    -l, --line <num>      show n lines
    --raw-ip              show raw ip instead of symbol

After:

$ ./perf kmem
...
    -l, --line <num>      show n lines
        --raw-ip          show raw ip instead of symbol

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4B20A1A9.3040104@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf kmem: Show usage if no option is specified
Li Zefan [Thu, 10 Dec 2009 07:21:57 +0000]
perf kmem: Show usage if no option is specified

As Ingo suggested, make "perf kmem" show help information.
"perf kmem stat [--caller] [--alloc] .." will show memory
statistics.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4B20A195.8030106@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agosched: Mark sched_clock() as notrace
Mike Frysinger [Thu, 10 Dec 2009 01:07:03 +0000]
sched: Mark sched_clock() as notrace

The core ftrace code (trace_clock_local) calls sched_clock()
directly, so we don't want to recurisvely trigger the ftrace
code.  Rather than update every sched_clock() definition, tag
the prototype for everyone as notrace.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1260407223-10900-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf sched: Add max delay time snapshot
Frederic Weisbecker [Wed, 9 Dec 2009 20:40:08 +0000]
perf sched: Add max delay time snapshot

When we have a maximum latency reported for a task, we need a
convenient way to find the matching location to the raw traces
or to perf sched map that shows where the task has been
eventually scheduled in. This gives a pointer to retrieve the
events that occured during this max latency.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260391208-6808-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf tools: Correct size given to memset
Julia Lawall [Wed, 9 Dec 2009 19:26:18 +0000]
perf tools: Correct size given to memset

Memset should be given the size of the structure, not the size
of the pointer.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T *x;
expression E;
@@

memset(x, E, sizeof(
+ *
 x))
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <Pine.LNX.4.64.0912092026000.1870@ask.diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Fix perf_swevent_hrtimer() variable initialization
Xiao Guangrong [Thu, 10 Dec 2009 06:00:51 +0000]
perf_event: Fix perf_swevent_hrtimer() variable initialization

fix:

 [<c0477471>] ? printk+0x1d/0x24
 [<c01c98f9>] ? perf_prepare_sample+0x269/0x280
 [<c0149231>] warn_slowpath_common+0x71/0xd0
 [<c01c98f9>] ? perf_prepare_sample+0x269/0x280
 [<c01492aa>] warn_slowpath_null+0x1a/0x20
 [<c01c98f9>] perf_prepare_sample+0x269/0x280
 [<c016e9f3>] ? cpu_clock+0x53/0x90
 [<c01cc368>] __perf_event_overflow+0x2a8/0x300
 [<c01ccc3b>] perf_event_overflow+0x1b/0x30
 [<c01ccccf>] perf_swevent_hrtimer+0x7f/0x120

This is because 'data.raw' variable not initialize.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B208E93.1010801@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf sched: Fix for getting task's execution time
Xiao Guangrong [Wed, 9 Dec 2009 09:51:30 +0000]
perf sched: Fix for getting task's execution time

In current code, task's execute time is got by reading
'/proc/<pid>/sched' file, it's wrong if the task is created
by pthread_create(), because every thread task has same pid.

This way also has two demerits:

 1: 'perf sched replay' can't work if the kernel is not
    compiled with the 'CONFIG_SCHED_DEBUG' option

 2: perf tool should depend on proc file system

So, this patch uses PERF_COUNT_SW_TASK_CLOCK to get task's
execution time instead of reading /proc file.

Changelog v2 -> v3:
use PERF_COUNT_SW_TASK_CLOCK instead of rusage() as Ingo's
suggestion

Reported-by: Torok Edwin <edwintorok@gmail.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Xiao Guangrong <ericxiao.gr@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B1F7322.80103@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotracing/kprobes: Fix field creation's bad error handling
Frederic Weisbecker [Tue, 8 Dec 2009 09:00:04 +0000]
tracing/kprobes: Fix field creation's bad error handling

When we define the common event fields in kprobe, we invert the error
handling and return immediately in case of success. Then we omit
to define specific kprobes fields (ip and nargs), and specific
kretprobes fields (func, ret_ip, nargs). And we only define them
when we fail to create common fields.

The most visible consequence is that we can't create filter for
k(ret)probes specific fields.

This patch re-invert the success/error handling to fix it.

Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1260263815-5167-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Cleanup for cpu_clock_perf_event_update()
Xiao Guangrong [Wed, 9 Dec 2009 03:30:36 +0000]
perf_event: Cleanup for cpu_clock_perf_event_update()

Using atomic64_xchg() instead of atomic64_read() and
atomic64_set().

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B1F19DC.90204@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Allocate children's perf_event_ctxp at the right time
Xiao Guangrong [Wed, 9 Dec 2009 03:29:44 +0000]
perf_event: Allocate children's perf_event_ctxp at the right time

In current code, children task will allocate memory for
'child->perf_event_ctxp' if the parent is counted, we can
do it only if the parent allowed children inherit it.

It can save memory and reduce overhead.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B1F19A8.5040805@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Clean up __perf_event_init_context()
Xiao Guangrong [Wed, 9 Dec 2009 03:28:13 +0000]
perf_event: Clean up __perf_event_init_context()

Clean up the code a bit:

 - define 'perf_cpu_context' variable with 'static'
 - use kzalloc() instead of kmalloc() and memset()

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B1F194D.7080306@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agohw-breakpoints: Modify breakpoints without unregistering them
Frederic Weisbecker [Wed, 9 Dec 2009 08:25:48 +0000]
hw-breakpoints: Modify breakpoints without unregistering them

Currently, when ptrace needs to modify a breakpoint, like disabling
it, changing its address, type or len, it calls
modify_user_hw_breakpoint(). This latter will perform the heavy and
racy task of unregistering the old breakpoint and registering a new
one.

This is racy as someone else might steal the reserved breakpoint
slot under us, which is undesired as the breakpoint is only
supposed to be modified, sometimes in the middle of a debugging
workflow. We don't want our slot to be stolen in the middle.

So instead of unregistering/registering the breakpoint, just
disable it while we modify its breakpoint fields and re-enable it
after if necessary.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1260347148-5519-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Update perf-probe document
Masami Hiramatsu [Tue, 8 Dec 2009 22:03:30 +0000]
perf probe: Update perf-probe document

Add --list and --del option descriptions to perf-probe.txt.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091208220330.10142.73296.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Support --del option
Masami Hiramatsu [Tue, 8 Dec 2009 22:03:23 +0000]
perf probe: Support --del option

Support perf probe --del <event> option. Currently,
perf probe can have only one event for each --del option.
If you'd like to delete several probe events, you need
to specify --del for each events.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220323.10142.62079.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotrace-kprobe: Support delete probe syntax
Masami Hiramatsu [Tue, 8 Dec 2009 22:03:16 +0000]
trace-kprobe: Support delete probe syntax

Support delete probe syntax. The syntax is "-:[group/]event".

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220316.10142.39192.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>

11 years agoperf probe: Support vmlinux on cwd by default
Masami Hiramatsu [Tue, 8 Dec 2009 22:03:09 +0000]
perf probe: Support vmlinux on cwd by default

Support vmlinux on current working direcotry by default and
also update file-open messages.
Now perf probe searches ./vmlinux too.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220309.10142.33040.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Remove event suffix number _0
Masami Hiramatsu [Tue, 8 Dec 2009 22:03:02 +0000]
perf probe: Remove event suffix number _0

Remove event suffix number _0 if it is the first.
The first event has no suffix, and from the second,
each event has suffix number counted from _1. This
reduces typing cost :-).

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220301.10142.50031.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Fix add-probe command syntax without --add option
Masami Hiramatsu [Tue, 8 Dec 2009 22:02:54 +0000]
perf probe: Fix add-probe command syntax without --add option

Fix add-probe command syntax without --add option.
perf-probe supports add-probe command without --add
option. But it treats each argument as an event definition.
e.g.

perf probe func arg1 arg2

 is interpreted as

perf probe --add func --add arg1 --add arg2

But it may be useless in many cases.

This patch fixes this syntax to fold those arguments into
one event definition if there is no --add option. With this
change, above command is interpreted as below;

perf probe --add "func arg1 arg2"

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220254.10142.73767.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Change probe-added message more user-friendly
Masami Hiramatsu [Tue, 8 Dec 2009 22:02:47 +0000]
perf probe: Change probe-added message more user-friendly

Change probe-added message more user-friendly expression and
show usage of new events.

Before:
Added new event: p:probe/schedule_0 schedule+10 prev=%ax cpu=%bx

After:
Added new event:
  probe:schedule_1                         (on schedule+1 with prev cpu)

You can now use it on all perf tools, such as:

        perf record -e probe:schedule_1 -a sleep 1

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220247.10142.91642.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Change event list format
Masami Hiramatsu [Tue, 8 Dec 2009 22:02:40 +0000]
perf probe: Change event list format

Change event list format for user readability. perf probe --list
shows event list in "[GROUP:EVENT] EVENT-DEFINITION" format, but
this format is different from the output of perf-list, and
EVENT-DEFINITION is a bit blunt. This patch changes the format to
more user friendly one.

Before:
[probe:schedule_0] schedule+10 prev cpu

After:
  probe:schedule_0                         (on schedule+10 with prev cpu)

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091208220240.10142.42916.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf: hw_breakpoints: Fix percpu namespace clash
Stephen Rothwell [Tue, 8 Dec 2009 07:25:15 +0000]
perf: hw_breakpoints: Fix percpu namespace clash

Today's linux-next build failed with:

  kernel/hw_breakpoint.c:86: error: 'task_bp_pinned' redeclared as different kind of symbol
  ...

Caused by commit dd17c8f72993f9461e9c19250e3f155d6d99df22 ("percpu:
remove per_cpu__ prefix") from the percpu tree interacting with
commit 56053170ea2a2c0dc17420e9b94aa3ca51d80408 ("hw-breakpoints:
Fix task-bound breakpoint slot allocation") from the tip tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20091208182515.bb6dda4a.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf events: hw_breakpoints: Don't include asm/hw_breakpoint.h in user space
Arnd Bergmann [Mon, 7 Dec 2009 16:12:58 +0000]
perf events: hw_breakpoints: Don't include asm/hw_breakpoint.h in user space

asm/hw_breakpoint.h is evidently a kernel internal file and
should not be included globally, not even under an #ifdef.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <200912071712.58650.arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Use pr_debug for debug message
Masami Hiramatsu [Mon, 7 Dec 2009 17:00:59 +0000]
perf probe: Use pr_debug for debug message

Use pr_debug() for "missing vmlinux" debugging message.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170059.19230.51459.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Check e_snprintf() format string
Masami Hiramatsu [Mon, 7 Dec 2009 17:00:53 +0000]
perf probe: Check e_snprintf() format string

Check e_snprintf() format string by gcc, and fix a bug of
e_snprintf() caller.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170053.19230.7690.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Fix event namelist to duplicate string
Masami Hiramatsu [Mon, 7 Dec 2009 17:00:46 +0000]
perf probe: Fix event namelist to duplicate string

Fix event namelist to duplicate string. Without duplicating, adding
multiple probes causes stack overwrite bug, because it reuses a
buffer on stack while the buffer is already added in the namelist.
String duplication solves this bug because only contents of the
buffer is copied to the namelist.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170046.19230.55557.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Fix strtailcmp() to compare s1and s2[0]
Juha Leppanen [Mon, 7 Dec 2009 17:00:40 +0000]
perf probe: Fix strtailcmp() to compare s1and s2[0]

Fix strtailcmp() to compare s1[0] and s2[0]. strtailcmp() returns 0
if "a" and "b" or "a" and "ab", it's a wrong behavior. This patch
fixes it.

Signed-off-by: "Juha Leppanen" <juha_motorsportcom@luukku.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Juha Leppanen <juha_motorsportcom@luukku.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170040.19230.37464.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agox86 insn: Delete empty or incomplete inat-tables.c
Masami Hiramatsu [Mon, 7 Dec 2009 17:00:33 +0000]
x86 insn: Delete empty or incomplete inat-tables.c

Delete empty or incomplete inat-tables.c if gen-insn-attr-x86.awk
failed, because it causes a build error if user tries to build
kernel next time.

Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170033.19230.37688.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agox86: Compile insn.c and inat.c only for KPROBES
OGAWA Hirofumi [Sun, 6 Dec 2009 11:14:29 +0000]
x86: Compile insn.c and inat.c only for KPROBES

At least, insn.c and inat.c is needed for kprobe for now. So,
this compile those only if KPROBES is enabled.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <878wdg8icq.fsf@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf tools: Optimize parse_subsystem_tracepoint_event()
Ulrich Drepper [Sun, 6 Dec 2009 18:25:30 +0000]
perf tools: Optimize parse_subsystem_tracepoint_event()

Uses of strcat are almost always signs that someone is too lazy
to think about the code a bit more carefully.  One always has to
know about the lengths of the strings involved to avoid buffer
overflows.

This is one case where the size of the object code for me is
reduced by 38 bytes.  The code should also be faster, especially
if flags is non-NULL.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: a.p.zijlstra@chello.nl
Cc: fweisbec@gmail.com
Cc: jaswinderrajput@gmail.com
Cc: paulus@samba.org
LKML-Reference: <200912061825.nB6IPUa1023306@hs20-bc2-1.build.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf trace/scripting: Don't display 'scripting unsupported' msg unnecessarily
Tom Zanussi [Mon, 7 Dec 2009 05:31:59 +0000]
perf trace/scripting: Don't display 'scripting unsupported' msg unnecessarily

The 'scripting unsupported' message should only be displayed
when the -s or -g options are used, and not when they aren't, as
the current code does.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: rostedt@goodmis.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1260163919-6679-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic...
Ingo Molnar [Mon, 7 Dec 2009 07:03:35 +0000]
Merge branch 'perf/urgent' of git://git./linux/kernel/git/frederic/random-tracing into perf/urgent

11 years agohw-breakpoints: Fix task-bound breakpoint slot allocation
Frederic Weisbecker [Mon, 7 Dec 2009 05:46:48 +0000]
hw-breakpoints: Fix task-bound breakpoint slot allocation

Whatever the context nature of a breakpoint, we always perform the
following constraint checks before allocating it a slot:

- Check the number of pinned breakpoint bound the concerned cpus
- Check the max number of task-bound breakpoints that are belonging
  to a task.
- Add both and see if we have a reamining slot for the new breakpoint

This is the right thing to do when we are about to register a cpu-only
bound breakpoint. But not if we are dealing with a task bound
breakpoint. What we want in this case is:

- Check the number of pinned breakpoint bound the concerned cpus
- Check the number of breakpoints that already belong to the task
  in which the breakpoint to register is bound to.
- Add both

This fixes a regression that makes the "firefox -g" command fail to
register breakpoints once we deal with a secondary thread.

Reported-by: Walt <w41ter@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>

11 years agohw-breakpoints: Zeroe the breakpoint attrs on initialization
Frederic Weisbecker [Mon, 7 Dec 2009 02:14:17 +0000]
hw-breakpoints: Zeroe the breakpoint attrs on initialization

The perf attrs used to set up breakpoint parameters are often allocated
in the stack and not zeroed out before calling hw_breakpoint_init().
Handle it from this helper to avoid random attributes set by the stack.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>

11 years agoperf trace/scripting: Fix compile error when libperl not installed
Tom Zanussi [Mon, 7 Dec 2009 02:41:52 +0000]
perf trace/scripting: Fix compile error when libperl not installed

When I added the xs callbacks into perf, I forgot to re-check
the no-libperl case. This patch fixes the undefined reference
error for that.

Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260153712.6564.4.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Eliminate raw->size
Xiao Guangrong [Mon, 7 Dec 2009 05:04:04 +0000]
perf_event: Eliminate raw->size

raw->size is not used, this patch just cleans it up.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B1C8CC4.4050007@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Fix __dsos__write_buildid_table()
Xiao Guangrong [Mon, 7 Dec 2009 04:07:15 +0000]
perf_event: Fix __dsos__write_buildid_table()

The remain buff size is 'len - pos->long_name_len - 1', not
'len - pos->long_name_len + 1'

This bug was introduced by commit 7691b1e ("perf tools: Misc small
fixes").

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B1C7F73.80707@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Fix raw event processing
Xiao Guangrong [Mon, 7 Dec 2009 04:06:29 +0000]
perf_event: Fix raw event processing

We use 'data.raw_data' parameter to call process_raw_event(),
but data.raw_data buffer not include data size. it can make perf
tool crash.

This bug was introduced by commit 180f95e29a ("perf: Make common
SAMPLE_EVENT parser").

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B1C7F45.5080105@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf/sched: Fix 'perf sched trace'
Xiao Guangrong [Mon, 7 Dec 2009 04:04:49 +0000]
perf/sched: Fix 'perf sched trace'

If we use 'perf sched trace', it will call symbol__init() again,
and can lead to a perf tool crash:

 [root@localhost perf]# ./perf sched trace
 *** glibc detected *** ./perf: free(): invalid next size (normal): 0x094c1898 ***
 ======= Backtrace: =========
 /lib/libc.so.6[0xb7602404]
 /lib/libc.so.6(cfree+0x96)[0xb76043b6]
 ./perf[0x80730fe]
 ./perf[0x8074c97]
 ./perf[0x805eb59]
 ./perf[0x80536fd]
 ./perf[0x804b618]
 ./perf[0x804bdc3]
 /lib/libc.so.6(__libc_start_main+0xe5)[0xb75a9735]
 ./perf[0x804af81]
 ======= Memory map: ========
 08048000-08158000 r-xp 00000000 fe:00 556831     /home/eric/....
 08158000-08168000 rw-p 0010f000 fe:00 556831     /home/eric/...
 08168000-085fe000 rw-p 00000000 00:00 0
 094ab000-094cc000 rw-p 00000000 00:00 0          [heap]

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: <4B1C7EE1.8030906@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf buildid-list: Fix copy'n'paste help message
Arnaldo Carvalho de Melo [Sun, 6 Dec 2009 20:03:10 +0000]
perf buildid-list: Fix copy'n'paste help message

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260129790-11520-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf tools: Misc small fixes
OGAWA Hirofumi [Sun, 6 Dec 2009 11:10:49 +0000]
perf tools: Misc small fixes

- util/header.c
"len" is aligned to 64. So, it tries to write the out of
long_name buffer.

So, this use "zero_buf" to write aligned area.

- util/trace-event-read.c
"size" is not including nul byte. So, this allocates it, and set '\0'.

- util/trace-event-parse.c
It needs parens to calc correct size.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <87d42s8iiu.fsf_-_@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf: Make common SAMPLE_EVENT parser
OGAWA Hirofumi [Sun, 6 Dec 2009 11:08:24 +0000]
perf: Make common SAMPLE_EVENT parser

Currently, sample event data is parsed for each commands, and it
is assuming that the data is not including other data. (E.g.
timechart, trace, etc. can't parse the event if it has
PERF_SAMPLE_CALLCHAIN)

So, even if we record the superset data for multiple commands at
a time, commands can't parse. etc.

To fix it, this makes common sample event parser, and use it to
parse sample event correctly. (PERF_SAMPLE_READ is unsupported
for now though, it seems to be not using.)

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <87hbs48imv.fsf@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf timechart: Fix header handling
OGAWA Hirofumi [Sun, 6 Dec 2009 11:07:29 +0000]
perf timechart: Fix header handling

Update "struct trace_entry" to match with current one. And
remove "size" field from it.

If it has "size", it become cause of alignment mismatch of
structure with kernel.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Acked-by: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <87ljhg8ioe.fsf@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agox86, perf probe: Fix warning in test_get_len()
Jean Delvare [Sun, 6 Dec 2009 11:40:59 +0000]
x86, perf probe: Fix warning in test_get_len()

Fix the following warning:

 arch/x86/tools/test_get_len.c: In function "main":
 arch/x86/tools/test_get_len.c:116: warning: unused variable "c"

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf tools: Correct size computation in tracepoint_id_to_path()
Julia Lawall [Sun, 6 Dec 2009 09:16:30 +0000]
perf tools: Correct size computation in tracepoint_id_to_path()

The size argument to zalloc should be the size of desired
structure, not the pointer to it.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@expression@
expression *x;
@@

x =
 <+...
-sizeof(x)
+sizeof(*x)
...+>// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <Pine.LNX.4.64.0912061016120.20858@ask.diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agox86: Fixup wrong irq frame link in stacktraces
Frederic Weisbecker [Sun, 6 Dec 2009 04:34:27 +0000]
x86: Fixup wrong irq frame link in stacktraces

When we enter in irq, two things can happen to preserve the link
to the previous frame pointer:

- If we were in an irq already, we don't switch to the irq stack
  as we are inside. We just need to save the previous frame
  pointer and to link the new one to the previous.

- Otherwise we need another level of indirection. We enter the irq with
  the previous stack. We save the previous bp inside and make bp
  pointing to its saved address. Then we switch to the irq stack and
  push bp another time but to the new stack. This makes two levels to
  dereference instead of one.

In the second case, the current stacktrace code omits the second level
and loses the frame pointer accuracy. The stack that follows will then
be considered as unreliable.

Handling that makes the perf callchain happier.
Before:

43.94%  [k] _raw_read_lock
            |
            --- _read_lock
               |
               |--60.53%-- send_sigio
               |          __kill_fasync
               |          kill_fasync
               |          evdev_pass_event
               |          evdev_event
               |          input_pass_event
               |          input_handle_event
               |          input_event
               |          synaptics_process_byte
               |          psmouse_handle_byte
               |          psmouse_interrupt
               |          serio_interrupt
               |          i8042_interrupt
               |          handle_IRQ_event
               |          handle_edge_irq
               |          handle_irq
               |          __irqentry_text_start
               |          ret_from_intr
               |          |
               |          |--30.43%-- __select
               |          |
               |          |--17.39%-- 0x454f15
               |          |
               |          |--13.04%-- __read
               |          |
               |          |--13.04%-- vread_hpet
               |          |
               |          |--13.04%-- _xcb_lock_io
               |          |
               |           --13.04%-- 0x7f630878ce8

After:

    50.00%  [k] _raw_read_lock
            |
            --- _read_lock
               |
               |--98.97%-- send_sigio
               |          __kill_fasync
               |          kill_fasync
               |          evdev_pass_event
               |          evdev_event
               |          input_pass_event
               |          input_handle_event
               |          input_event
               |          |
               |          |--96.88%-- synaptics_process_byte
               |          |          psmouse_handle_byte
               |          |          psmouse_interrupt
               |          |          serio_interrupt
               |          |          i8042_interrupt
               |          |          handle_IRQ_event
               |          |          handle_edge_irq
               |          |          handle_irq
               |          |          __irqentry_text_start
               |          |          ret_from_intr
               |          |          |
               |          |          |--39.78%-- __const_udelay
               |          |          |          |
               |          |          |          |--91.89%-- ath5k_hw_register_timeout
               |          |          |          |          ath5k_hw_noise_floor_calibration
               |          |          |          |          ath5k_hw_reset
               |          |          |          |          ath5k_reset
               |          |          |          |          ath5k_config
               |          |          |          |          ieee80211_hw_config
               |          |          |          |          |
               |          |          |          |          |--88.24%-- ieee80211_scan_work
               |          |          |          |          |          worker_thread
               |          |          |          |          |          kthread
               |          |          |          |          |          child_rip
               |          |          |          |          |
               |          |          |          |           --11.76%-- ieee80211_scan_completed
               |          |          |          |                     ieee80211_scan_work
               |          |          |          |                     worker_thread
               |          |          |          |                     kthread
               |          |          |          |                     child_rip
               |          |          |          |
               |          |          |           --8.11%-- ath5k_hw_noise_floor_calibration
               |          |          |                     ath5k_hw_reset
               |          |          |                     ath5k_reset
               |          |          |                     ath5k_config

Note: This does not only affect perf events but also x86-64
stacktraces. They were considered as unreliable once we quit
the irq stack frame.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>

11 years agox86: Fixup wrong debug exception frame link in stacktraces
Frederic Weisbecker [Sat, 5 Dec 2009 23:52:56 +0000]
x86: Fixup wrong debug exception frame link in stacktraces

While dumping a stacktrace, the end of the exception stack won't link
the frame pointer to the previous stack.

The interrupted stack will then be considered as unreliable and ignored
by perf, as the frame pointer is unreliable itself.

This happens because we overwrite the frame pointer that links to the
interrupted frame with the address of the exception stack. This is
done in order to reserve space inside.
But rbp has been chosen here only because it is not a scratch register,
so that the address of the exception stack remains in rbp after calling
do_debug(), we can then release the exception stack space without the
need to retrieve its address again.

But we can pick another non-scratch register to do that, so that we
preserve the link to the interrupted stack frame in the stacktraces.

Just randomly choose r12. Every registers are saved just before and
restored just after calling do_debug(). And r12 is not used in the
middle, which makes it a perfect candidate.

Example: perf record -g -a -c 1 -f -e mem:$(tasklist_lock_addr):rw

Before:
    44.18%  [k] _raw_read_lock
            |
            |
            ---  |--6.31%-- waitid
                 |
                 |--4.26%-- writev
                 |
                 |--3.63%-- __select
                 |
                 |--3.15%-- __waitpid
                 |          |
                 |          |--28.57%-- 0x8b52e00000139f
                 |          |
                 |          |--28.57%-- 0x8b52e0000013c6
                 |          |
                 |          |--14.29%-- 0x7fde786dc000
                 |          |
                 |          |--14.29%-- 0x62696c2f7273752f
                 |          |
                 |           --14.29%-- 0x1ea9df800000000
                 |
                 |--3.00%-- __poll

After:

    43.94%  [k] _raw_read_lock
            |
            --- _read_lock
               |
               |--60.53%-- send_sigio
               |          __kill_fasync
               |          kill_fasync
               |          evdev_pass_event
               |          evdev_event
               |          input_pass_event
               |          input_handle_event
               |          input_event
               |          synaptics_process_byte
               |          psmouse_handle_byte
               |          psmouse_interrupt
               |          serio_interrupt
               |          i8042_interrupt
               |          handle_IRQ_event
               |          handle_edge_irq
               |          handle_irq
               |          __irqentry_text_start
               |          ret_from_intr
               |          |
               |          |--30.43%-- __select
               |          |
               |          |--17.39%-- 0x454f15
               |          |
               |          |--13.04%-- __read
               |          |
               |          |--13.04%-- vread_hpet
               |          |
               |          |--13.04%-- _xcb_lock_io
               |          |
               |           --13.04%-- 0x7f630878ce87

Note: it does not only affect perf events but also other stacktraces in
x86-64. They were considered as unreliable once we quit the debug
stack frame.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>

11 years agox86/perf: Exclude the debug stack from the callchains
Frederic Weisbecker [Sat, 5 Dec 2009 11:01:17 +0000]
x86/perf: Exclude the debug stack from the callchains

Dumping the callchains from breakpoint events with perf gives strange
results:

3.75%             perf  [kernel]           [k] _raw_read_unlock
                       |
                       --- _raw_read_unlock
                           perf_callchain
                           perf_prepare_sample
                           __perf_event_overflow
                           perf_swevent_overflow
                           perf_swevent_add
                           perf_bp_event
                           hw_breakpoint_exceptions_notify
                           notifier_call_chain
                           __atomic_notifier_call_chain
                           atomic_notifier_call_chain
                           notify_die
                           do_debug
                           debug
                           munmap

We are infected with all the debug stack. Like the nmi stack, the debug
stack is undesired as it is part of the profiling path, not helpful for
the user.

Ignore it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

11 years agoperf: Remove the "event" callback from perf events
Frederic Weisbecker [Sat, 5 Dec 2009 08:53:28 +0000]
perf: Remove the "event" callback from perf events

As it is not used anymore and has been superseded by overflow_handler.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

11 years agohw-breakpoints: Use overflow handler instead of the event callback
Frederic Weisbecker [Sat, 5 Dec 2009 08:44:31 +0000]
hw-breakpoints: Use overflow handler instead of the event callback

struct perf_event::event callback was called when a breakpoint
triggers. But this is a rather opaque callback, pretty
tied-only to the breakpoint API and not really integrated into perf
as it triggers even when we don't overflow.

We prefer to use overflow_handler() as it fits into the perf events
rules, being called only when we overflow.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

11 years agohw-breakpoints: Drop callback and task parameters from modify helper
Frederic Weisbecker [Sat, 5 Dec 2009 06:06:10 +0000]
hw-breakpoints: Drop callback and task parameters from modify helper

Drop the callback and task parameters from modify_user_hw_breakpoint().
For now we have no user that need to modify a breakpoint to the point
of changing its handler or its task context.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

11 years agoperf: Remove unused struct perf_event::event_callback
Frederic Weisbecker [Thu, 3 Dec 2009 22:59:31 +0000]
perf: Remove unused struct perf_event::event_callback

This field might result from an older manual rebasing mistake.
We don't use it.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

11 years agoperf: Remove pointless union that wraps the hw breakpoint fields
Frederic Weisbecker [Thu, 3 Dec 2009 22:16:07 +0000]
perf: Remove pointless union that wraps the hw breakpoint fields

It stands to anonymize a structure, but structures can already
anonymize by themselves.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

11 years agohw-breakpoints: Add two reserved fields for future extensions
Frederic Weisbecker [Thu, 3 Dec 2009 21:08:26 +0000]
hw-breakpoints: Add two reserved fields for future extensions

Add two reserved fields for future extensions in the hardware
breakpoints interface. Further needs may arise.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

11 years agoMerge branch 'perf/probes' into perf/core
Ingo Molnar [Thu, 3 Dec 2009 19:11:37 +0000]
Merge branch 'perf/probes' into perf/core

Merge reason: add these fixes to 'perf probe'.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'perf/mce' into perf/core
Ingo Molnar [Thu, 3 Dec 2009 19:10:59 +0000]
Merge branch 'perf/mce' into perf/core

Merge reason: It's ready for v2.6.33.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'perf/scripting' into perf/core
Ingo Molnar [Thu, 3 Dec 2009 19:10:35 +0000]
Merge branch 'perf/scripting' into perf/core

Merge reason: it's ready for v2.6.33.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agox86: Fix comments of register/stack access functions
Masami Hiramatsu [Tue, 1 Dec 2009 00:02:22 +0000]
x86: Fix comments of register/stack access functions

Fix typos and some redundant comments of register/stack access
functions in asm/ptrace.h.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Wenji Huang <wenji.huang@oracle.com>
Cc: Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com>
LKML-Reference: <20091201000222.7669.7477.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suggested-by: Wenji Huang <wenji.huang@oracle.com>

11 years agoperf tools: Replace %m with %a in sscanf
Liming Wang [Wed, 2 Dec 2009 08:42:54 +0000]
perf tools: Replace %m with %a in sscanf

Not all glibc support %m and it results in a compile error if
%m not supported. Replace it with %a and (float *) casts.

Signed-off-by: Liming Wang <liming.wang@windriver.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: peterz@infradead.org
Cc: mhiramat@redhat.com
LKML-Reference: <1259743374-9950-1-git-send-email-liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agohw-breakpoints: Keep track of user disabled breakpoints
Frederic Weisbecker [Wed, 2 Dec 2009 06:32:16 +0000]
hw-breakpoints: Keep track of user disabled breakpoints

When we disable a breakpoint through dr7, we unregister it right
away, making us lose track of its corresponding address
register value.

It means that the following sequence would be unsupported:

 - set address in dr0
 - enable it through dr7
 - disable it through dr7
 - enable it through dr7

because we lost the address register value when we disabled the
breakpoint.

Don't unregister the disabled breakpoints but rather disable
them.

Reported-by: "K.Prasad" <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259735536-9236-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotracing/syscalls: Make syscall events print callbacks static
Frederic Weisbecker [Wed, 2 Dec 2009 06:23:10 +0000]
tracing/syscalls: Make syscall events print callbacks static

enter_syscall_print_##sname and exit_syscall_print_##sname don't
need to have a global scope. Make them static.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1259734990-9034-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotracing: Add DEFINE_EVENT(), DEFINE_SINGLE_EVENT() support to docbook
Jason Baron [Tue, 1 Dec 2009 17:18:49 +0000]
tracing: Add DEFINE_EVENT(), DEFINE_SINGLE_EVENT() support to docbook

The introduction of the new 'DECLARE_EVENT_CLASS()' obviates the
need for the 'TRACE_EVENT()' macro in some cases. Thus, docbook
style comments that used to live with 'TRACE_EVENT()' are now
moved to 'DEFINE_EVENT()'. Thus, we need to make the docbook
system understand the new 'DEFINE_EVENT()' macro. In addition
I've tried to futureproof the patch, by also adding support for
'DEFINE_SINGLE_EVENT()', since there has been discussion about
renaming: TRACE_EVENT() -> DEFINE_SINGLE_EVENT().

Without this patch the tracepoint docbook fails to build.

I've verified that this patch correctly builds the tracepoint
docbook which currently covers signals, and irqs.

Changes in v2:
 - properly indent perl 'if' statements

Signed-off-by: Jason Baron <jbaron@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <200912011718.nB1HIn7t011371@int-mx04.intmail.prod.int.phx2.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf: Don't free perf_mmap_data until work has been done
Kristian Høgsberg [Tue, 1 Dec 2009 20:05:01 +0000]
perf: Don't free perf_mmap_data until work has been done

In the CONFIG_PERF_USE_VMALLOC case, perf_mmap_data_free() only
schedules the cleanup of the perf_mmap_data struct.  In that
case we have to wait until the work has been done before we free
data.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <1259697901-1747-1-git-send-email-krh@bitplanet.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Fix compile error
Xiao Guangrong [Wed, 2 Dec 2009 08:08:41 +0000]
perf_event: Fix compile error

Fix:

 cc1: warnings being treated as errors
 builtin-probe.c: In function 'cmd_probe':
 builtin-probe.c:163: error: unused variable 'fd'

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4B162089.8000907@cn.fujitsu.com>
[ v2: use NO_LIBDWARF instead of __used ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf tools: Fix _GNU_SOURCE macro related strndup() build error
Liming Wang [Wed, 2 Dec 2009 06:11:46 +0000]
perf tools: Fix _GNU_SOURCE macro related strndup() build error

strndup is a GNU extension. So dont include string.h without
defining _GNU_SOURCE (it results in a compile error otherwise).

Remove these includes as util.h does it already.

Signed-off-by: Liming Wang <liming.wang@windriver.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: peterz@infradead.org
Cc: mhiramat@redhat.com
LKML-Reference: <1259734306-26323-1-git-send-email-liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotrace_syscalls: Remove unused syscall_name_to_nr()
Lai Jiangshan [Tue, 1 Dec 2009 08:24:06 +0000]
trace_syscalls: Remove unused syscall_name_to_nr()

After duplications are removed, syscall_name_to_nr() is unused.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D2A6.6060803@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotrace_syscalls: Simplify syscall profile
Lai Jiangshan [Tue, 1 Dec 2009 08:24:01 +0000]
trace_syscalls: Simplify syscall profile

use only one prof_sysenter_enable() instead of
prof_sysenter_enable_##sname()

use only one prof_sysenter_disable() instead of
prof_sysenter_disable_##sname()

use only one prof_sysexit_enable() instead of
prof_sysexit_enable_##sname()

use only one prof_sysexit_disable() instead of
prof_sysexit_disable_##sname()

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D2A1.8060304@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotrace_syscalls: Remove duplicate init_enter_##sname()
Lai Jiangshan [Tue, 1 Dec 2009 08:23:55 +0000]
trace_syscalls: Remove duplicate init_enter_##sname()

use only one init_syscall_trace instead of
many init_enter_##sname()/init_exit_##sname()

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D29B.6090708@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotrace_syscalls: Add syscall_nr field to struct syscall_metadata
Lai Jiangshan [Tue, 1 Dec 2009 08:23:47 +0000]
trace_syscalls: Add syscall_nr field to struct syscall_metadata

Add syscall_nr field to struct syscall_metadata,
it helps us to get syscall number easier.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D293.6090800@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotrace_syscalls: Remove enter_id exit_id
Lai Jiangshan [Tue, 1 Dec 2009 08:23:36 +0000]
trace_syscalls: Remove enter_id exit_id

use ->enter_event->id instead of ->enter_id
use ->exit_event->id instead of ->exit_id

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D288.7030001@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotrace_syscalls: Set event_enter_##sname->data to its metadata
Lai Jiangshan [Tue, 1 Dec 2009 08:23:30 +0000]
trace_syscalls: Set event_enter_##sname->data to its metadata

Set event_enter_##sname->data to its metadata,
it makes codes simpler.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D282.7050709@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotrace_syscalls: Remove unused event_syscall_enter and event_syscall_exit
Lai Jiangshan [Tue, 1 Dec 2009 08:23:20 +0000]
trace_syscalls: Remove unused event_syscall_enter and event_syscall_exit

fix event_enter_##sname->event
fix event_exit_##sname->event

remove unused event_syscall_enter and event_syscall_exit

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D278.4090209@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_event: Initialize data.period in perf_swevent_hrtimer()
Xiao Guangrong [Tue, 1 Dec 2009 09:30:08 +0000]
perf_event: Initialize data.period in perf_swevent_hrtimer()

In current code in perf_swevent_hrtimer(), data.period is not
initialized, The result is obvious wrong:

 # ./perf record -f -e cpu-clock make
 # ./perf report
 # Samples: 1740
 #
 # Overhead   Command                                   ......
 # ........  ........  ..........................................
 #
   1025422183050275328.00%        sh  libc-2.9.90.so ...
   1025422183050275328.00%      perl  libperl.so     ...
   1025422168240043264.00%      perl  [kernel]       ...
   1025422030011210752.00%      perl  [kernel]       ...

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <4B14E220.2050107@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Simplify event naming
Masami Hiramatsu [Tue, 1 Dec 2009 00:20:25 +0000]
perf probe: Simplify event naming

Simplify event naming as <symbol>_<seqnum>. Each event name is
globally unique (group name is not checked). So, if there is
schedule_0, next probe event on schedule() will be schedule_1.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201002024.10235.2353.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Add --list option for listing current probe events
Masami Hiramatsu [Tue, 1 Dec 2009 00:20:17 +0000]
perf probe: Add --list option for listing current probe events

Add --list option for listing currently defined probe events
in the kernel. This shows events in below format;

 [group:event] <perf-probe probe-definition>

for example:

 [probe:schedule_0] schedule+30 cpu

Note that source file/line information is not supported yet.
So even if you added a probe by line, it will be shown in
<symbol+offset>.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201002017.10235.76575.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Add argv_split() from lib/argv_split.c
Masami Hiramatsu [Tue, 1 Dec 2009 00:20:05 +0000]
perf probe: Add argv_split() from lib/argv_split.c

Add argv_split() ported from lib/argv_split.c to string.c and
use it in util/probe-event.c.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201002005.10235.55602.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Move probe event utility functions to probe-event.c
Masami Hiramatsu [Tue, 1 Dec 2009 00:19:58 +0000]
perf probe: Move probe event utility functions to probe-event.c

Split probe event (kprobe-events and perf probe events) utility
functions from builtin-probe.c to probe-event.c.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201001958.10235.90243.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Fix probe array index for multiple probe points
Masami Hiramatsu [Tue, 1 Dec 2009 00:19:51 +0000]
perf probe: Fix probe array index for multiple probe points

Fix the index of formatted probe array for multiple probe
points, which should be probes[i] instead of probes[0].

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201001950.10235.54781.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Fix argv array size in probe parser
Masami Hiramatsu [Tue, 1 Dec 2009 00:19:43 +0000]
perf probe: Fix argv array size in probe parser

Since the syntax has been changed, probe definition needs
parameters less than MAX_PROBE_ARGS + 1 (probe-point +
arguments).

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201001943.10235.80367.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Add probe-finder.h without libdwarf
Masami Hiramatsu [Tue, 1 Dec 2009 00:19:34 +0000]
perf probe: Add probe-finder.h without libdwarf

Add probe-finder.h as LIB_H without libdwarf, because that
header is included even if no libdwarf.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201001934.10235.44656.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf probe: Change a debugging message from pr_info to pr_debug
Masami Hiramatsu [Tue, 1 Dec 2009 00:19:27 +0000]
perf probe: Change a debugging message from pr_info to pr_debug

Change annoying debug-info using notice from pr_info() to
pr_debug(), since the message always printed when user adds a
probe point which requires debug-info.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201001927.10235.63645.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agotrace_kprobes: Fix a memory leak bug and check kstrdup() return value
Masami Hiramatsu [Tue, 1 Dec 2009 00:19:20 +0000]
trace_kprobes: Fix a memory leak bug and check kstrdup() return value

Fix a memory leak case in create_trace_probe(). When an argument
is too long (> MAX_ARGSTR_LEN), it just jumps to error path. In
that case tp->args[i].name is not released.
This also fixes a bug to check kstrdup()'s return value.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201001919.10235.56455.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf timechart: Remove open-coded event parsing code
Li Zefan [Tue, 1 Dec 2009 06:05:16 +0000]
perf timechart: Remove open-coded event parsing code

Convert builtin-timechart.c to mmap_dispatch_perf_file() +
perf_file_handler.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Arjan van de Ven <arjan@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B14B21C.2040406@cn.fujitsu.com>
[ v2: cleaned up the printout, fixed a whitespace detail ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf annotate: Fix perf data parsing
Li Zefan [Tue, 1 Dec 2009 06:04:49 +0000]
perf annotate: Fix perf data parsing

perf-annotate doesn't parse perf.data correctly in that it
doesn't read perf header. Fix this by using
mmap_dispatch_perf_file().

Before:

TOTAL events:      17565
      MMAP events:       3221
      LOST events:         10
      COMM events:        235
      EXIT events:          2
  THROTTLE events:          1
UNTHROTTLE events:          2
      FORK events:         10
      READ events:          1
    SAMPLE events:      14083

After:

TOTAL events:      17290
      MMAP events:       3203
      LOST events:          0
      COMM events:        234
      EXIT events:          1
  THROTTLE events:          0
UNTHROTTLE events:          0
      FORK events:          0
      READ events:          0
    SAMPLE events:      13852

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <4B14B201.9030708@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf trace/scripting: Add Fedora libperl install note to doc
Tom Zanussi [Mon, 30 Nov 2009 07:18:49 +0000]
perf trace/scripting: Add Fedora libperl install note to doc

Fedora needs perl-ExtUtils-Embed for Perl scripting, which also
brings along libperl-devel; note this info for the convenience
of Fedora users.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259565529-6407-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf trace/scripting: Fix Perl common_* access functions
Tom Zanussi [Mon, 30 Nov 2009 07:18:48 +0000]
perf trace/scripting: Fix Perl common_* access functions

The common_* functions (e.g. common_pc(), etc) are exported as
common_* but named get_common_*, resulting in unresolved
subroutine errors when executing scripts.

Make the internal and external names match.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259565529-6407-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf trace/scripting: Ignore shadowed variable warning for perf-trace-perl.c
Tom Zanussi [Mon, 30 Nov 2009 07:18:47 +0000]
perf trace/scripting: Ignore shadowed variable warning for perf-trace-perl.c

The debugging versions of the ENTER and LEAVE internal perl
macros, used when embedding perl, define a local block with a
my_perl perl variable that shadows a global variable of the same
name, which is also the name expected by the embedding API for
the embedded interpreter.

Since we don't have control over the code generated in this case
(it's an externality) and can't get rid of the warning, ignore it.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259565529-6407-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf trace/scripting: Silence PERL_EMBED_* backtick errors
Tom Zanussi [Mon, 30 Nov 2009 07:18:46 +0000]
perf trace/scripting: Silence PERL_EMBED_* backtick errors

The backtick shell substitutions for PERL_EMBED_LDOPT/CCOPT make
a lot of noise on stderr if Embed.pm isn't installed - this
silences them.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259565529-6407-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf scripting: Fix build
Ingo Molnar [Sat, 28 Nov 2009 09:11:00 +0000]
perf scripting: Fix build

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf trace: Add a scripts/perl/bin for perf trace shell scripts
Tom Zanussi [Wed, 25 Nov 2009 07:15:52 +0000]
perf trace: Add a scripts/perl/bin for perf trace shell scripts

To capture the relevant events for a given Perl script and to
avoid having to continually remember and type in long
command-lines, add a scripts/perl/bin directory containing two
simple shell scripts for each Perl script, one for recording and
one for processing/display. For example, to record perf data for
the rw-by-pid.pl script, run scripts/perl/bin/rw-by-pid-record
and to actually run the script and display the output run
scripts/perl/bin/rw-by-pid-report.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf trace: Add Documentation for perf trace Perl support
Tom Zanussi [Wed, 25 Nov 2009 07:15:51 +0000]
perf trace: Add Documentation for perf trace Perl support

Adds perf-trace-perl Documentation and a link to it from the
perf-trace page.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-7-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>