13 years agoV4L/DVB (8198): gspca: Frame decoding errors when PAC207 in full daylight.
Hans de Goede [Fri, 4 Jul 2008 21:39:08 +0000]
V4L/DVB (8198): gspca: Frame decoding errors when PAC207 in full daylight.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8197): gspca: pac207 frames no more decoded in the subdriver.
Hans de Goede [Fri, 4 Jul 2008 21:29:32 +0000]
V4L/DVB (8197): gspca: pac207 frames no more decoded in the subdriver.

videodev2: New pixfmt
pac207:   Remove the specific decoding.
main:     get_buff_size operation added for the subdriver.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8196): gspca: Correct sizeimage in vidioc_s/try/g_fmt_cap
Hans de Goede [Fri, 4 Jul 2008 20:55:18 +0000]
V4L/DVB (8196): gspca: Correct sizeimage in vidioc_s/try/g_fmt_cap

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8195): gspca: Input buffer overwritten in spca561 + cleanup code.
Jean-Francois Moine [Fri, 4 Jul 2008 14:16:16 +0000]
V4L/DVB (8195): gspca: Input buffer overwritten in spca561 + cleanup code.

spca561:  Input buffer may be changed on reg write.
(all sd): Cleanup code, 'const' added.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8194): gspca: Fix the format of the low resolution mode of spca561.
Hans de Goede [Thu, 3 Jul 2008 14:20:58 +0000]
V4L/DVB (8194): gspca: Fix the format of the low resolution mode of spca561.

The low (half) res modes of the spca561 are not spca561 compressed, but are
raw bayer, this patches fixes this and adds a PIX_FMT define for the GBRG
bayer format used by the spca561 in low res mode.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8193): gspca: Input buffer may be changed on reg write.
Jean-Francois Moine [Thu, 3 Jul 2008 14:09:12 +0000]
V4L/DVB (8193): gspca: Input buffer may be changed on reg write.

Done for conex, etoms, pac7311, sonixj, t613 and tv8532.
Code cleanup for some other subdrivers.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8192): Try to fix a reg_w() bug
Hans de Goede [Thu, 3 Jul 2008 11:15:22 +0000]
V4L/DVB (8192): Try to fix a reg_w() bug

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8191): gspca: Make CONFIG_VIDEO_ADV_DEBUG actually work.
Hans de Goede [Thu, 3 Jul 2008 09:48:22 +0000]
V4L/DVB (8191): gspca: Make CONFIG_VIDEO_ADV_DEBUG actually work.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8189): cx18: Use correct GPIO pin for resetting Xceive 3028 tuner on Yuan...
Andy Walls [Mon, 7 Jul 2008 13:36:16 +0000]
V4L/DVB (8189): cx18: Use correct GPIO pin for resetting Xceive 3028 tuner on Yuan MPC718

Change the Yuan MPC718 cards entry to use the correct GPIO pin for resetting
the Xceive 3028 tuner.  Thanks to Brian Hope <brian@hopefamily.info> for
taking the time and figuring out which pin to use.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8188): cx18: Add missing reset recovery delay in cx18-i2c.c
Andy Walls [Sun, 6 Jul 2008 22:36:52 +0000]
V4L/DVB (8188): cx18: Add missing reset recovery delay in cx18-i2c.c

cx18: Add a missing reset recovery delay in cx18-i2c.c after
the final deassert.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8186): dib0700: add support for Hauppauge Nova-TD Stick 52009
Michael Krufky [Fri, 4 Jul 2008 02:43:36 +0000]
V4L/DVB (8186): dib0700: add support for Hauppauge Nova-TD Stick 52009

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8184): spca508: Add Clone Digital Webcam 11043
Douglas Schilling Landgraf [Fri, 4 Jul 2008 07:40:28 +0000]
V4L/DVB (8184): spca508: Add Clone Digital Webcam 11043

Added ID vendor/product for Clone Digital Webcam 11043.
Thanks to Ivan Brasil Fuzzer <ivan@fuzzer.com.br> for testing and data collection.

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8183): cxusb: select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
Michael Krufky [Wed, 2 Jul 2008 15:55:49 +0000]
V4L/DVB (8183): cxusb: select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE

After adding support for AVerTVHD Volar, DVB_USB_CXUSB must
select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8181): gspca: read() did not work (loop in kernel, timeout...)
Jean-Francois Moine [Wed, 2 Jul 2008 12:14:56 +0000]
V4L/DVB (8181): gspca: read() did not work (loop in kernel, timeout...)

main:     Remove some vidioc_xx traces.
main:     read() did not work (user irq instead of mmap irq).
main:     Lack of v4l1 compat.
main:     Process loop inside kernel when no frame arriving.
main:     Double qbuf in read() when too many buffered frames.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8180): Source cleanup - compile error with VIDEO_ADV_DEBUG.
Jean-Francois Moine [Tue, 1 Jul 2008 13:03:42 +0000]
V4L/DVB (8180): Source cleanup - compile error with VIDEO_ADV_DEBUG.

main, etoms, mars, pac207, pac7311, sonixb, sonixj, spca500, spca505:
 Cleanup source.
sunplus: Compilation error when VIDEO_ADV_DEBUG set.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8176): pvrusb2: Update video_gop_size
Mike Isely [Mon, 30 Jun 2008 06:35:52 +0000]
V4L/DVB (8176): pvrusb2: Update video_gop_size

When switching video standard, ensure that video GOP size remains
appropriately configured.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8175): pvrusb2: Fix misleading source code comment
Mike Isely [Mon, 30 Jun 2008 06:32:35 +0000]
V4L/DVB (8175): pvrusb2: Fix misleading source code comment

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8173): saa711x.c: remove obsolete file.
Hans Verkuil [Tue, 1 Jul 2008 21:46:09 +0000]
V4L/DVB (8173): saa711x.c: remove obsolete file.

saa711x.c is no longer used. Remove.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8171): ivtv: put back full device name, people relied on it in udev rules.
Hans Verkuil [Mon, 30 Jun 2008 23:02:47 +0000]
V4L/DVB (8171): ivtv: put back full device name, people relied on it in udev rules.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8169): cx18: enable TS support
Hans Verkuil [Sat, 28 Jun 2008 23:57:56 +0000]
V4L/DVB (8169): cx18: enable TS support

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8168): cx18: Upgrade to newer firmware & update cx18 documentation.
Hans Verkuil [Sat, 28 Jun 2008 23:57:30 +0000]
V4L/DVB (8168): cx18: Upgrade to newer firmware & update cx18 documentation.

Conexant graciously gave us permission to redistribute the
firmware. Update the documentation where the firmware can be
downloaded.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8168a): cx18: Update cx18 documentation.
Hans Verkuil [Sat, 28 Jun 2008 17:57:30 +0000]
V4L/DVB (8168a): cx18: Update cx18 documentation.

Update the documentation, providing an updated list of supported boards.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8167): cx18: set correct audio inputs for tuner and line-in 2.
Hans Verkuil [Sat, 28 Jun 2008 15:49:20 +0000]
V4L/DVB (8167): cx18: set correct audio inputs for tuner and line-in 2.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8165): cx18: fix v4l-cx23418-dig.fw firmware load.
Hans Verkuil [Sat, 28 Jun 2008 11:03:02 +0000]
V4L/DVB (8165): cx18: fix v4l-cx23418-dig.fw firmware load.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8164): cx18/ivtv: choose a better initial TV standard for cards without...
Hans Verkuil [Sat, 28 Jun 2008 02:27:25 +0000]
V4L/DVB (8164): cx18/ivtv: choose a better initial TV standard for cards without eeprom.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8162): cx18: fix PAL/SECAM support
Hans Verkuil [Fri, 27 Jun 2008 18:33:02 +0000]
V4L/DVB (8162): cx18: fix PAL/SECAM support

Reverted the 'Fix unintended auto configurations in cx18-av-core' patch,
instead disable the auto config completely.

Fix a bug in cx18_av_vbi_setup() where the standard tests were done
in the wrong order.

Tested with NTSC-M, PAL-BG, PAL-I, PAL-DK, PAL-M, PAL-Nc, SECAM-DK,
SECAM-L and SECAM-BG. The last one does not work at the moment due to
a tda9887.c bug.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8161): gspca: Fix compilation
Mauro Carvalho Chehab [Tue, 1 Jul 2008 07:06:22 +0000]
V4L/DVB (8161): gspca: Fix compilation

Some callbacks were renamed. Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8158): gspca: minor changes
Jean-Francois Moine [Mon, 30 Jun 2008 22:47:33 +0000]
V4L/DVB (8158): gspca: minor changes

main: V4L2_PIX_FMT_SPCA501 is compressed (thanks to Hans de Goede)
main: return 0 when no change on vidioc_s_fmt_cap (thanks to Hans de Goede)
pac207: cleanup

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8157): gspca: all subdrivers
Jean-Francois Moine [Mon, 30 Jun 2008 18:50:11 +0000]
V4L/DVB (8157): gspca: all subdrivers

- remaning subdrivers added
- remove the decoding helper and some specific frame decodings

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8156): Many bug fixes, zc3xx added.
Jean-Francois Moine [Thu, 12 Jun 2008 13:58:58 +0000]
V4L/DVB (8156): Many bug fixes, zc3xx added.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8154): Fix protection problems in the main driver.
Jean-Francois Moine [Sun, 4 May 2008 09:46:21 +0000]
V4L/DVB (8154): Fix protection problems in the main driver.

- Protect format change when streaming active.
- Protect USB exchanges on close.
- Set a timeout in frame wait.
- Have only one capture file and free the resources when closing this file.
- Simplify the URB buffer.
- Don't reset the control values at open time in pac207.
- Fix compilation warnings of stk014.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8153): Subdriver pac207 added and minor changes.
Hans de Goede [Wed, 23 Apr 2008 11:09:12 +0000]
V4L/DVB (8153): Subdriver pac207 added and minor changes.

pac207 added.
Check status on mutex lock.
Call back on frame dequeue.
Free the resources on last close only.
Avoid URB and ISOC errors on close.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8152): Initial release of gspca with only one driver.
Jean-Francois Moine [Sat, 12 Apr 2008 12:58:09 +0000]
V4L/DVB (8152): Initial release of gspca with only one driver.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8151): saa7134-empress: fix MPEG control support
Hans Verkuil [Sat, 28 Jun 2008 00:18:15 +0000]
V4L/DVB (8151): saa7134-empress: fix MPEG control support

The MPEG controls could not be enumerated and so could not be read or set
through the v4l2-ctl utility or shown in control panels.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8149): Avermedia E506 composite
Tim Farrington [Sun, 29 Jun 2008 14:54:08 +0000]
V4L/DVB (8149): Avermedia E506 composite

Composite was originally mis-labelled as name_comp1,
so it should be simply redone as name_comp,
with its now corrected attributes.

Signed-off-by: Tim Farrington <timf@iinet.net.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8147): cxusb: add initial support for AVerTVHD Volar
Daniel Gimpelevich [Sat, 28 Jun 2008 08:01:30 +0000]
V4L/DVB (8147): cxusb: add initial support for AVerTVHD Volar

Add initial support for this device. The AGC and tracking filter
settings for the mxl5003 are known to be wrong, but it generally works.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8146): lgdt330x: add additional FEC control configuration option
Michael Krufky [Sat, 28 Jun 2008 05:06:50 +0000]
V4L/DVB (8146): lgdt330x: add additional FEC control configuration option

Allow the following configuration, by passing clock_polarity_flip = 2:

Enable FEC automatic reset. Disable spectrum inversion.
Enable viterbi resynchronization. Set polarity indicator high.
Enable error flag insertion.

Thanks to Daniel Gimpelevich, for discovering that this configuration
is used on the AVerMedia AVerTVHD Volar.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
CC: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8143): Fix compilation for mt9v022
Mauro Carvalho Chehab [Sun, 29 Jun 2008 11:41:19 +0000]
V4L/DVB (8143): Fix compilation for mt9v022

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8142): ttpci: tda827x.h is at drivers/media/common
Mauro Carvalho Chehab [Sun, 29 Jun 2008 11:29:00 +0000]
V4L/DVB (8142): ttpci: tda827x.h is at drivers/media/common

As reported by Stephen Rothwell <sfr@canb.auug.org.au>:

drivers/media/dvb/ttpci/budget-ci.c:50:21: error: tda827x.h: No such file or directory

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8136): xc2028 unaligned access fixes
Al Viro [Sun, 22 Jun 2008 17:19:29 +0000]
V4L/DVB (8136): xc2028 unaligned access fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8135): WRITE_RPS1() converts to le32 itself
Al Viro [Sun, 22 Jun 2008 17:19:39 +0000]
V4L/DVB (8135): WRITE_RPS1() converts to le32 itself

... but two ancient drivers had not noticed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8134): zoran annotations and fixes
Al Viro [Sun, 22 Jun 2008 17:19:49 +0000]
V4L/DVB (8134): zoran annotations and fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8133): cx23885 endianness fixes
Al Viro [Sun, 22 Jun 2008 17:19:59 +0000]
V4L/DVB (8133): cx23885 endianness fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8132): bt8xx endianness annotations and fixes
Al Viro [Sun, 22 Jun 2008 17:20:09 +0000]
V4L/DVB (8132): bt8xx endianness annotations and fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8131): dmx_write: memcpy from user-supplied pointer
Al Viro [Sun, 22 Jun 2008 17:20:19 +0000]
V4L/DVB (8131): dmx_write: memcpy from user-supplied pointer

... copy to kernel memory first

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8130): split dvb_ringbuffer dual-use functions
Al Viro [Sun, 22 Jun 2008 17:20:29 +0000]
V4L/DVB (8130): split dvb_ringbuffer dual-use functions

split the suckers into kernel-memory and user-memory versions,
annotate both properly.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8129): pluto_set_dma_addr() fix
Al Viro [Sun, 22 Jun 2008 17:20:39 +0000]
V4L/DVB (8129): pluto_set_dma_addr() fix

bogus cpu_to_le32() when passing dma address to hardware
via writel() - writel() converts itself.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8128): saa7146: ->cpu_addr and friends are little-endian
Al Viro [Sun, 22 Jun 2008 17:19:19 +0000]
V4L/DVB (8128): saa7146: ->cpu_addr and friends are little-endian

Annotations + stop saa7146_i2c from playing fast and loose with
reuse of ->cpu_addr for host-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8126): net endianness fix
Al Viro [Sun, 22 Jun 2008 17:20:49 +0000]
V4L/DVB (8126): net endianness fix

According to RFC 4326 (4.1) D-bit is MSB in net-endian 16bit.
dvb_net.c did
/* Set D-bit for CRC32 verification,
 * if it was set originally. */
ulen |= 0x0080;
which works of little-endian (htons(1<<15) is 0x0080 there), but breaks
on big-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.
Dean Anderson [Fri, 27 Jun 2008 02:15:51 +0000]
V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.

It was primarily developed by Dean Anderson with only a little bit of
guidance and cleanup by Greg.

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[mchehab@infradead.org: fixed renamed callbacks]
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8124): Add LifeVideo To-Go Cardbus PCI ID
Daniel Gimpelevich [Sat, 28 Jun 2008 04:45:26 +0000]
V4L/DVB (8124): Add LifeVideo To-Go Cardbus PCI ID

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8123): Add support for em2860 based PointNix Intra-Oral Camera
Devin Heitmueller [Sat, 28 Jun 2008 11:57:06 +0000]
V4L/DVB (8123): Add support for em2860 based PointNix Intra-Oral Camera

em28xx-cards.c
em28xx-input.c
em28xx-video.c
em28xx.h
 - Add support for the PointNix Intra-Oral Camera, which required addition of
   a construct for reading the "snapshot" button (provided on the em2860 and
   em2880 chips, but this is the first case where I have seen it actually used
   in a product). The button is wired to pin 56 on the em2880.

   http://www.pointnix.com/ENG/dental/product_02.asp

   Thanks to Roberto Mantovani <rmantovani@libero.it> for testing the changes

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8120): cx23885-417: Replace cx23885_do_ioctl to use video_ioctl2
Douglas Schilling Landgraf [Fri, 27 Jun 2008 07:15:38 +0000]
V4L/DVB (8120): cx23885-417: Replace cx23885_do_ioctl to use video_ioctl2

Convert cx23885-417 to use video_ioctl2

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8117): saa7134: Avermedia A16D composite input
Dan Taylor [Fri, 27 Jun 2008 16:29:41 +0000]
V4L/DVB (8117): saa7134: Avermedia A16D composite input

Signed-off-by: Star Trac by Unisen, Inc. Dan Taylor <dtaylor@startrac.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8116): videodev: allow PRIVATE_BASE controls when called through VIDIOC_G...
Hans Verkuil [Wed, 25 Jun 2008 09:54:05 +0000]
V4L/DVB (8116): videodev: allow PRIVATE_BASE controls when called through VIDIOC_G/S_CTRL.

V4L2_CID_PRIVATE_BASE controls are not allowed when called from
VIDIOC_S/G_EXT_CTRL as extended controls use a better mechanism
for private controls. But still allow it when called from the
VIDIOC_G/S_CTRL to extended control conversion in video_ioctl2()
for backwards compatibility.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8114): cx18: Improve Raptor card audio input routing defintions
Andy Walls [Wed, 25 Jun 2008 03:24:21 +0000]
V4L/DVB (8114): cx18: Improve Raptor card audio input routing defintions

cx18: Improved Raptor card audio input routing defintions, so that muxer values
matched cx18_gpio() values for tuner, line in 1, and radio and added LED
indication of selected audio input.  Audio line in 2 doesn't work as it uses
the not yet supported 2nd I2S port.  Tuner/FM Radio AF is mono until SIF
support is fixed.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8113): ivtv/cx18: remove s/g_ctrl, now all controls are handled through...
Hans Verkuil [Wed, 25 Jun 2008 09:32:44 +0000]
V4L/DVB (8113): ivtv/cx18: remove s/g_ctrl, now all controls are handled through s/g_ext_ctrl

videodev converts old-style controls to an extended control so the ivtv and
cx18 drivers no longer have to handle both.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8112): videodev: improve extended control support in video_ioctl2()
Hans Verkuil [Wed, 25 Jun 2008 09:29:01 +0000]
V4L/DVB (8112): videodev: improve extended control support in video_ioctl2()

- add sanity checks for the extended controls argument.
- if the driver only supports extended controls, then convert
  old-style controls to an extended control callback.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8111): ivtv/cx18: fix compile error when CONFIG_VIDEO_ADV_DEBUG is not defined.
Hans Verkuil [Wed, 25 Jun 2008 09:00:17 +0000]
V4L/DVB (8111): ivtv/cx18: fix compile error when CONFIG_VIDEO_ADV_DEBUG is not defined.

Thanks to Randy Dunlap for reporting this.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8110): bttv: allow debug ioctl's
Mauro Carvalho Chehab [Mon, 23 Jun 2008 15:31:29 +0000]
V4L/DVB (8110): bttv: allow debug ioctl's

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8107): cx18: improve support for the Raptor board.
Hans Verkuil [Sun, 22 Jun 2008 15:11:13 +0000]
V4L/DVB (8107): cx18: improve support for the Raptor board.

- add radio definition
- reset the audio firmware (required for this board, harmless for the
others)

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8106): ivtv/cx18: improve tuner std check in card definitions.
Hans Verkuil [Sun, 22 Jun 2008 15:08:16 +0000]
V4L/DVB (8106): ivtv/cx18: improve tuner std check in card definitions.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8105): cx2341x: add TS capability
Hans Verkuil [Sun, 22 Jun 2008 15:03:28 +0000]
V4L/DVB (8105): cx2341x: add TS capability

The cx18 can support transport streams with newer firmwares. Add a TS
capability to the generic cx2341x module.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8104): cx18/ivtv: ioctl debugging improvements
Hans Verkuil [Sun, 22 Jun 2008 14:57:31 +0000]
V4L/DVB (8104): cx18/ivtv: ioctl debugging improvements

Completely rely on the video_ioctl2 debugging facilities rather than
doing it ourselves.

Fill in some missing fields in ivtv with VIDIOC_G_FBUF.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8103): videodev: fix/improve ioctl debugging
Hans Verkuil [Sun, 22 Jun 2008 14:55:09 +0000]
V4L/DVB (8103): videodev: fix/improve ioctl debugging

Various ioctl debugging fixes and improvements:

- use %x rather than %d for control IDs and bitmask fields
- make two arrays const
- show the whole control array for the ext_ctrl ioctls
- print pix_fmt for V4L2_BUF_TYPE_VIDEO_OUTPUT
- show full type name rather than an integer
- fix CROPCAP debugging
- fix G/S_TUNER debugging
- show error code in case of an error
- other small cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8098): xc5000: add module option to load firmware during driver attach
Michael Krufky [Sun, 22 Jun 2008 01:13:42 +0000]
V4L/DVB (8098): xc5000: add module option to load firmware during driver attach

The xc5000 firmware download process can be slow on certain devices.

Add a module option, "init_fw" to perform the firmware download during
xc5000_attach(), which would get the firmware download over with well
before any tune request is made.

When this option is enabled, it will reduce the time it takes to get a
signal lock during the first tune after driver load, but will add a few
seconds to the driver initialization.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8095): zoran_driver.c: Removed duplicated include
Huang Weiyi [Sat, 21 Jun 2008 17:30:33 +0000]
V4L/DVB (8095): zoran_driver.c: Removed duplicated include

Removed duplicated include file <asm/byteorder.h> in
drivers/media/video/zoran_driver.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8093): cx18: fix prefix typo
Hans Verkuil [Sat, 21 Jun 2008 16:25:36 +0000]
V4L/DVB (8093): cx18: fix prefix typo

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8091): cx18: show GPIO pins when VIDIOC_LOG_STATUS is called.
Hans Verkuil [Sat, 21 Jun 2008 14:19:34 +0000]
V4L/DVB (8091): cx18: show GPIO pins when VIDIOC_LOG_STATUS is called.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8090): ivtv: yuv decoder lock fix (2)
Ian Armstrong [Sat, 21 Jun 2008 14:09:46 +0000]
V4L/DVB (8090): ivtv: yuv decoder lock fix (2)

The IVTV_IOC_DMA_FRAME ioctl fails to correctly 'start' the decoder. Although
yuv output will be correct, some functions which should be disabled while the
decoder is in use remain enabled. This can result in hardware registers being
corrupted, causing problems with the mpeg decoder. This patch ensures the
decoder 'start' sequence is called, disabling these functions until the
device is closed.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8089): cx18: add support for Conexant Raptor PAL/SECAM card
Sri Deevi [Sat, 21 Jun 2008 14:06:44 +0000]
V4L/DVB (8089): cx18: add support for Conexant Raptor PAL/SECAM card

Patch provided courtesy of Conexant http://www.conexant.com.

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8088): ivtv: yuv decoder lock fix
Ian Armstrong [Sat, 21 Jun 2008 12:25:23 +0000]
V4L/DVB (8088): ivtv: yuv decoder lock fix

write() operations to the yuv device may not always 'start' the decoder.
Although yuv output will be correct, some functions which should be disabled
while the decoder is in use remain enabled. This can result in hardware
registers being corrupted, causing problems with the mpeg decoder. This patch
simply moves the existing decoder 'start' sequence to earlier in the write()
handler.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8087): cx18: make sure all v4l2_format fields are filled in
Hans Verkuil [Sat, 21 Jun 2008 12:22:19 +0000]
V4L/DVB (8087): cx18: make sure all v4l2_format fields are filled in

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8086): ivtv/cx18: fix video_temporal_filter handling
Hans Verkuil [Sat, 21 Jun 2008 12:21:23 +0000]
V4L/DVB (8086): ivtv/cx18: fix video_temporal_filter handling

If the capture is scaled, then the video_temporal_filter is set to 0
by the cx2341x.c module since otherwise you would get ghosting.

However, this was also done in the VIDIOC_S_FMT ioctl which meant that
the video_temporal_filter control was reset to 0 or 8 each time S_FMT
was called. This was old code that should have been removed a long time
ago.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8085): ivtv: fill in all v4l2_framebuffer fields in VIDIOC_G/S_FBUF
Hans Verkuil [Sat, 21 Jun 2008 12:06:59 +0000]
V4L/DVB (8085): ivtv: fill in all v4l2_framebuffer fields in VIDIOC_G/S_FBUF

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8084): ivtv/cx18: remove unnecessary memsets & KERNEL_VERSION tests
Hans Verkuil [Sat, 21 Jun 2008 12:02:36 +0000]
V4L/DVB (8084): ivtv/cx18: remove unnecessary memsets & KERNEL_VERSION tests

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8083): videodev: zero fields for ENCODER_CMD and VIDIOC_G_SLICED_VBI_CAP
Hans Verkuil [Sat, 21 Jun 2008 11:57:42 +0000]
V4L/DVB (8083): videodev: zero fields for ENCODER_CMD and VIDIOC_G_SLICED_VBI_CAP

This avoids the need of memsets in the ivtv/cx18 drivers.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8082): cx18: convert to video_ioctl2()
Andy Walls [Sat, 21 Jun 2008 11:36:31 +0000]
V4L/DVB (8082): cx18: convert to video_ioctl2()

cx18: convert driver to use video_ioctl2().  Pushed down ioctl debug
messages and priority checks as well.  Still left serialization lock in
place for now.  #if 0'ed out sliced vbi ioctl code for now.

Patch heavily based on similar changes made to ivtv by Hans Verkuil.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8081): ivtv: remove obsolete arrays.
Hans Verkuil [Sat, 21 Jun 2008 11:15:37 +0000]
V4L/DVB (8081): ivtv: remove obsolete arrays.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8080): ivtv: make sure all v4l2_format fields are filled in
Hans Verkuil [Sat, 21 Jun 2008 11:00:56 +0000]
V4L/DVB (8080): ivtv: make sure all v4l2_format fields are filled in

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8079): ivtv: Convert to video_ioctl2.
Hans Verkuil [Thu, 29 May 2008 19:43:54 +0000]
V4L/DVB (8079): ivtv: Convert to video_ioctl2.

Based on an initial conversion patch from Douglas Landgraf.

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8078): Introduce "index" attribute for persistent video4linux device nodes
brandon@ifup.org [Sat, 21 Jun 2008 01:58:53 +0000]
V4L/DVB (8078): Introduce "index" attribute for persistent video4linux device nodes

A number of V4L drivers have a mod param to specify their preferred minors.
This is because it is often desirable for applications to have a static /dev
name for a particular device.  However, using minors has several disadvantages:

  1) the requested minor may already be taken
  2) using a mod param is driver specific
  3) it requires every driver to add a param
  4) requires configuration by hand

This patch introduces an "index" attribute that when combined with udev rules
can create static device paths like this:

/dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video0
/dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video1
/dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video2

$ ls -la /dev/v4l/by-path/pci-0000\:00\:1d.2-usb-0\:1\:1.0-video0
lrwxrwxrwx 1 root root 12 2008-04-28 00:02 /dev/v4l/by-path/pci-0000:00:1d.2-usb-0:1:1.0-video0 -> ../../video1

These paths are steady across reboots and should be resistant to rearranging
across Kernel versions.

video_register_device_index is available to drivers to request a
specific index number.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Kees Cook <kees@outflux.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8076): budget-ci: Support the bundled remote control of the TT DVB-C 1501
Oliver Endriss [Fri, 20 Jun 2008 02:36:45 +0000]
V4L/DVB (8076): budget-ci: Support the bundled remote control of the TT DVB-C 1501

Support the bundled remote control of the TT DVB-C 1501

Thanks-to: SG <SiestaGomez@web.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8072): av7110: Removed some obsolete definitions and one unused variable
Oliver Endriss [Fri, 20 Jun 2008 01:56:03 +0000]
V4L/DVB (8072): av7110: Removed some obsolete definitions and one unused variable

Removed some obsolete definitions and one unused variable.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8065): Add missing selects at dvb-usb/Kconfig
Mauro Carvalho Chehab [Wed, 18 Jun 2008 19:23:52 +0000]
V4L/DVB (8065): Add missing selects at dvb-usb/Kconfig

Add missing auto-selects for MEDIA_TUNER_XC2028 and DVB_TDA1004X at
dvb-usb/Kconfig.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8060): Kconfig: MEDIA_TUNER_CUSTOMIZE should be disabled by default
Michael Krufky [Tue, 17 Jun 2008 18:32:08 +0000]
V4L/DVB (8060): Kconfig: MEDIA_TUNER_CUSTOMIZE should be disabled by default

The build option, MEDIA_TUNER_CUSTOMIZE, allows us to disable tuner drivers
that would have otherwise been selected by default.  This is an advanced
customization option that should be disabled by default.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8059): Add missing select for MEDIA_TUNER_TDA827X
Mauro Carvalho Chehab [Wed, 18 Jun 2008 12:27:21 +0000]
V4L/DVB (8059): Add missing select for MEDIA_TUNER_TDA827X

$ find linux/drivers/media/dvb -exec grep -l tda827x_attach '{}' \;
linux/drivers/media/dvb/dvb-usb/m920x.c
linux/drivers/media/dvb/ttpci/budget-ci.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8051): ttpci/Kconfig: Technotrend budget C-1501 needs tda10023
Mauro Carvalho Chehab [Mon, 16 Jun 2008 15:35:06 +0000]
V4L/DVB (8051): ttpci/Kconfig: Technotrend budget C-1501 needs tda10023

Auto-selects tda10023, for budget-ci, if !DVB_FE_CUSTOMISE. This is needed for
Technotrend budget C-1501 dvb board.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8050): Add register get/set debug ioctls to saa7134
Mauro Carvalho Chehab [Mon, 16 Jun 2008 15:31:57 +0000]
V4L/DVB (8050): Add register get/set debug ioctls to saa7134

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8049): budget-ci: Add support for Technotrend budget C-1501 dvb-c card
Sigmund Augdal [Sun, 15 Jun 2008 20:25:46 +0000]
V4L/DVB (8049): budget-ci: Add support for Technotrend budget C-1501 dvb-c card

The following experimental patch adds support for the technotrend budget
C-1501 dvb-c card. The parameters used to configure the tda10023 demod
chip are largely determined experimentally, but works quite for me in my
initial tests.

Signed-off-by: Sigmund Augdal <sigmund@snap.tv>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8047): bt8xx: i2c structure templates clean-up
Jean Delvare [Sun, 15 Jun 2008 15:20:18 +0000]
V4L/DVB (8047): bt8xx: i2c structure templates clean-up

Clean up the use of structure templates in bttv-i2c. For one thing, a
real template is supposed to be read-only. And in some cases it's more
efficient to initialize the few fields we need individually.

This clean-up shrinks bttv-i2c.o by 29% (x86_64).

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8046): zoran: i2c structure templates clean-up
Jean Delvare [Thu, 12 Jun 2008 16:20:46 +0000]
V4L/DVB (8046): zoran: i2c structure templates clean-up

Clean up the use of structure templates in zoran_card. For one thing,
a real template is supposed to be read-only. And in some cases it's
more efficient to initialize the few fields we need individually.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8032): Anysee: fix Kconfig
Antti Palosaari [Wed, 11 Jun 2008 14:43:19 +0000]
V4L/DVB (8032): Anysee: fix Kconfig

- select DVB_PLL
- fix typos in comments

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8031): Anysee: support for Anysee E30C Plus rev 0.4
Antti Palosaari [Tue, 10 Jun 2008 01:58:22 +0000]
V4L/DVB (8031): Anysee: support for Anysee E30C Plus rev 0.4

- support for Anysee E30C Plus rev 0.4
 - set IO port E
 - set correct TS mode
- change deltaf according to latest Windows driver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8030): TDA10023: make TS output mode configurable
Antti Palosaari [Tue, 10 Jun 2008 01:53:04 +0000]
V4L/DVB (8030): TDA10023: make TS output mode configurable

- make TS output mode configurable

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8024): vivi: rename MODULE_NAME macro to VIVI_MODULE_NAME to avoid namespace...
Mauro Carvalho Chehab [Tue, 10 Jun 2008 18:21:49 +0000]
V4L/DVB (8024): vivi: rename MODULE_NAME macro to VIVI_MODULE_NAME to avoid namespace conflicts

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8023): vivi: announce that it is registered as /dev/video%d
Carl Karsten [Tue, 10 Jun 2008 03:02:32 +0000]
V4L/DVB (8023): vivi: announce that it is registered as /dev/video%d

Signed-off-by: Carl Karsten <carl@personnelware.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8021): Beholder's cards description
Dmitry Belimov [Tue, 10 Jun 2008 17:22:00 +0000]
V4L/DVB (8021): Beholder's cards description

Split the Beholder M6 family to different models. Because M6 hasn`t RDS, M63
has chip with AC3 codec, M6 Extra has other type of HF module.
Add correct data for support MPEG encoder.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8019): New for I2S on for MPEG of saa7134_empress
Dmitry Belimov [Tue, 10 Jun 2008 15:43:58 +0000]
V4L/DVB (8019): New for I2S on for MPEG of saa7134_empress

Rework saa7134_enable_i2s function. Remove vendor specific data.
Configure I2S output port specific for model of SAA7133/5-SAA7134.
I think it is more good.
Renamed definition of I2S audio output control register. It`s SAA7133/5 register
Start video port after configuring procedure.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

13 years agoV4L/DVB (8014): gl861: coding style fixes
Antti Palosaari [Thu, 29 May 2008 01:16:31 +0000]
V4L/DVB (8014): gl861: coding style fixes

- coding style fixes raised by checkpatch

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>