10 years agoatmel_serial: enable PPS support
Viktar Palstsiuk [Wed, 9 Feb 2011 14:26:13 +0000]
atmel_serial: enable PPS support

Enables PPS support in atmel serial driver to make PPS API working.

Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agotty: Add msm_smd_tty driver
Niranjana Vishwanathapura [Wed, 9 Feb 2011 19:16:34 +0000]
tty: Add msm_smd_tty driver

msm_smd_tty driver provides tty device interface
to 'DS' and 'GPSNMEA' streaming SMD ports.

Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Niranjana Vishwanathapura <nvishwan@codeaurora.org>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: change the divisor latch only when prescalar actually changed
Yin Kangkai [Wed, 9 Feb 2011 03:35:18 +0000]
serial: change the divisor latch only when prescalar actually changed

In 8250.c original ns16550 autoconfig code, we change the divisor latch when
we goto to high speed mode, we're assuming the previous speed is legacy. This
some times is not true.

For example in a system with both CONFIG_SERIAL_8250 and
CONFIG_SERIAL_8250_PNP set, in this case, the code (autoconfig) will be called
twice, one in serial8250_init/probe() and the other is from
serial_pnp_probe. When serial_pnp_probe calls the autoconfig for NS16550A,
it's already in high speed mode, change the divisor latch (quot << 3) in this
case will make the UART console garbled.

CC: Greg Kroah-Hartman <greg@kroah.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: linux-kernel@vger.kernel.org
CC: stable@kernel.org
Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: also set the uartclk value in resume after goes to highspeed
Yin Kangkai [Wed, 9 Feb 2011 03:34:20 +0000]
serial: also set the uartclk value in resume after goes to highspeed

For any reason if the NS16550A was not work in high speed mode (e.g. we hold
NS16550A from going to high speed mode in autoconfig_16550a()), now we are
resume from suspend, we should also set the uartclk to the correct
value. Otherwise it is still the old 1843200 and that will bring issues.

CC: Greg Kroah-Hartman <greg@kroah.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: linux-kernel@vger.kernel.org
CC: stable@kernel.org
Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: ifx6x60: minor cleanup
Russ Gorby [Mon, 7 Feb 2011 20:02:32 +0000]
serial: ifx6x60: minor cleanup

renamed spi_driver variable to not be h/w specific
set driver name to use DRVNAME define
removed commented-out define

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: ifx6x60: probe routine needs to call spi_setup
Russ Gorby [Mon, 7 Feb 2011 20:02:31 +0000]
serial: ifx6x60: probe routine needs to call spi_setup

The probe routine should call spi_setup() to configure
the SPI bus so it can properly communicate with the device.
E.g. the device operates in SPI mode 1.

Called spi_setup to configure SPI mode, max_speed_hz, and bpw

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: ifx6x60: set SPI max_speed_hz based on platform type
Russ Gorby [Mon, 7 Feb 2011 20:02:30 +0000]
serial: ifx6x60: set SPI max_speed_hz based on platform type

Platforms containing the 6260 can run up to 25Mhz.

For these platforms set max_speed_hz to 25Mhz.

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: ifx6x60: changed internal bpw from boolean to int
Russ Gorby [Mon, 7 Feb 2011 20:02:29 +0000]
serial: ifx6x60: changed internal bpw from boolean to int

driver should support 32bit SPI transfers. The boolean variable
only allowed 8/16.

Changed to support 8/16/32 for future enabling
of 32 bpw.

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: ifx6x60: dma_alloc_coherent must use parent dev
Russ Gorby [Mon, 7 Feb 2011 20:02:28 +0000]
serial: ifx6x60: dma_alloc_coherent must use parent dev

This driver is a SPI protocol driver and has no DMA ops
associated with the device so the call will fail. Furthermore,
the DMA allocation made here will be used by the SPI
controller driver (parent dev) so it makes sense to
pass that device instead.

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: ifx6x60: fixed call to tty_port_init
Russ Gorby [Mon, 7 Feb 2011 20:02:27 +0000]
serial: ifx6x60: fixed call to tty_port_init

The port ops must be set AFTER calling port init as that function
zeroes the structure

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agotty,vcs removing con_buf/conf_buf_mtx
Jiri Olsa [Mon, 7 Feb 2011 18:31:25 +0000]
tty,vcs removing con_buf/conf_buf_mtx

seems there's no longer need for using con_buf/conf_buf_mtx
as vcs_read/vcs_write buffer for user's data.

The do_con_write function, that was the other user of this,
is currently using its own kmalloc-ed buffer.

Not sure when this got changed, as I was able to find this code
in 2.6.9, but it's already gone as far as current git history
goes - 2.6.12-rc2.

AFAICS there's a behaviour change with the current change.
The lseek is not completely mutually exclusive with the
vcs_read/vcs_write - the file->f_pos might get updated
via lseek callback during the vcs_read/vcs_write processing.

I tried to find out if the prefered behaviour is to keep
this in sync within read/write/lseek functions, but I did
not find any pattern on different places.

I guess if user end up calling write/lseek from different
threads she should know what she's doing. If needed we
could use dedicated fd mutex/buffer.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agotty,vcs: lseek/VC-release race fix
Jiri Olsa [Mon, 7 Feb 2011 18:31:24 +0000]
tty,vcs: lseek/VC-release race fix

there's a race between vcs's lseek handler and VC release.

The lseek handler does not hold console_lock and touches
VC's size info. If during this the VC got released, there's
an access violation.

Following program triggers the issue for me:

[SNIP]
#define _BSD_SOURCE
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/vt.h>
#include <unistd.h>
#include <errno.h>

static int run_seek(void)
{
        while(1) {
                int fd;
                fd = open("./vcs30", O_RDWR);
                while(lseek(fd, 0, 0) != -1);
                close(fd);
        }
}

static int open_ioctl_tty(void)
{
        return open("/dev/tty1", O_RDWR);
}

static int do_ioctl(int fd, int req, int i)
{
        return ioctl(fd, req, i);
}

#define INIT(i) do_ioctl(ioctl_fd, VT_ACTIVATE, i)
#define SHUT(i) do_ioctl(ioctl_fd, VT_DISALLOCATE, i)

int main(int argc, char **argv)
{
        int ioctl_fd = open_ioctl_tty();

        if (ioctl < 0) {
                perror("open tty1 failed\n");
                return -1;
        }

        if ((-1 == mknod("vcs30", S_IFCHR|0666, makedev(7, 30))) &&
            (errno != EEXIST)) {
                printf("errno %d\n", errno);
                perror("failed to create vcs30");
                return -1;
        }

        do_ioctl(ioctl_fd, VT_LOCKSWITCH, 0);

        if (!fork())
                run_seek();

        while(1) {
                INIT(30);
                SHUT(30);
        }

        return 0;
}
[SNIP]

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoTTY: use appropriate printk priority level
Mandeep Singh Baines [Sun, 6 Feb 2011 17:31:53 +0000]
TTY: use appropriate printk priority level

printk()s without a priority level default to KERN_WARNING. To reduce
noise at KERN_WARNING, this patch set the priority level appriopriately
for unleveled printks()s. This should be useful to folks that look at
dmesg warnings closely.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agohvc: add Blackfin JTAG console support
Mike Frysinger [Sat, 5 Feb 2011 01:45:49 +0000]
hvc: add Blackfin JTAG console support

This converts the existing bfin_jtag_comm TTY driver to the HVC layer so
that the common HVC code can worry about all of the TTY/polling crap and
leave the Blackfin code to worry about the Blackfin bits.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agovt: Add virtual console keyboard mode OFF
Arthur Taylor [Fri, 4 Feb 2011 21:55:50 +0000]
vt: Add virtual console keyboard mode OFF

virtual console: add keyboard mode OFF

Add a new mode for the virtual console keyboard OFF in which all input
other than shift keys is ignored. Prevents vt input buffers from
overflowing when a program opens but doesn't read from a tty, like X11
using evdev for input.

Signed-off-by: Arthur Taylor <art@ified.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agohvc_dcc: Simplify assembly for v6 and v7 ARM
Stephen Boyd [Thu, 3 Feb 2011 23:48:36 +0000]
hvc_dcc: Simplify assembly for v6 and v7 ARM

The inline assembly differences for v6 vs. v7 in the hvc_dcc
driver are purely optimizations. On a v7 processor, an mrc with
the pc sets the condition codes to the 28-31 bits of the register
being read. It just so happens that the TX/RX full bits the DCC
driver is testing for are high enough in the register to be put
into the condition codes. On a v6 processor, this "feature" isn't
implemented and thus we have to do the usual read, mask, test
operations to check for TX/RX full.

Since we already test the RX/TX full bits before calling
__dcc_getchar() and __dcc_putchar() we don't actually need to do
anything special for v7 over v6. The only difference is in
hvc_dcc_get_chars(). We would test RX full, poll RX full, and
then read a character from the buffer, whereas now we will test
RX full, read a character from the buffer, and then test RX full
again for the second iteration of the loop. It doesn't seem
possible for the buffer to go from full to empty between testing
the RX full and reading a character. Therefore, replace the v7
versions with the v6 versions and everything works the same.

Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agohvc_dcc: Simplify put_chars()/get_chars() loops
Stephen Boyd [Thu, 3 Feb 2011 23:48:35 +0000]
hvc_dcc: Simplify put_chars()/get_chars() loops

Casting and anding with 0xff is unnecessary in
hvc_dcc_put_chars() since buf is already a char[].
__dcc_get_char() can't return an int less than 0 since it only
returns a char. Simplify the if statement in hvc_dcc_get_chars()
to take this into account.

Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agohvc_dcc: Fix bad code generation by marking assembly volatile
Stephen Boyd [Thu, 3 Feb 2011 23:48:34 +0000]
hvc_dcc: Fix bad code generation by marking assembly volatile

Without marking the asm __dcc_getstatus() volatile my compiler
decides it can cache the value of __ret in a register and then
check the value of it continually in hvc_dcc_put_chars() (I had
to replace get_wait/put_wait with 1 and fixup the branch
otherwise my disassembler barfed on __dcc_(get|put)char).

00000000 <hvc_dcc_put_chars>:
   0:   ee103e11        mrc     14, 0, r3, cr0, cr1, {0}
   4:   e3a0c000        mov     ip, #0  ; 0x0
   8:   e2033202        and     r3, r3, #536870912      ; 0x20000000
   c:   ea000006        b       2c <hvc_dcc_put_chars+0x2c>
  10:   e3530000        cmp     r3, #0  ; 0x0
  14:   1afffffd        bne     10 <hvc_dcc_put_chars+0x10>
  18:   e7d1000c        ldrb    r0, [r1, ip]
  1c:   ee10fe11        mrc     14, 0, pc, cr0, cr1, {0}
  20:   2afffffd        bcs     1c <hvc_dcc_put_chars+0x1c>
  24:   ee000e15        mcr     14, 0, r0, cr0, cr5, {0}
  28:   e28cc001        add     ip, ip, #1      ; 0x1
  2c:   e15c0002        cmp     ip, r2
  30:   bafffff6        blt     10 <hvc_dcc_put_chars+0x10>
  34:   e1a00002        mov     r0, r2
  38:   e12fff1e        bx      lr

As you can see, the value of the mrc is checked against
DCC_STATUS_TX (bit 29) and then stored in r3 for later use.
Marking the asm volatile produces the following:

00000000 <hvc_dcc_put_chars>:
   0:   e3a03000        mov     r3, #0  ; 0x0
   4:   ea000007        b       28 <hvc_dcc_put_chars+0x28>
   8:   ee100e11        mrc     14, 0, r0, cr0, cr1, {0}
   c:   e3100202        tst     r0, #536870912  ; 0x20000000
  10:   1afffffc        bne     8 <hvc_dcc_put_chars+0x8>
  14:   e7d10003        ldrb    r0, [r1, r3]
  18:   ee10fe11        mrc     14, 0, pc, cr0, cr1, {0}
  1c:   2afffffd        bcs     18 <hvc_dcc_put_chars+0x18>
  20:   ee000e15        mcr     14, 0, r0, cr0, cr5, {0}
  24:   e2833001        add     r3, r3, #1      ; 0x1
  28:   e1530002        cmp     r3, r2
  2c:   bafffff5        blt     8 <hvc_dcc_put_chars+0x8>
  30:   e1a00002        mov     r0, r2
  34:   e12fff1e        bx      lr

which looks better and actually works. Mark all the inline
assembly in this file as volatile since we don't want the
compiler to optimize away these statements or move them around
in any way.

Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: pch_uart: revert Kconfig for non-DMA mode
Tomoya MORINAGA [Fri, 28 Jan 2011 09:00:02 +0000]
serial: pch_uart: revert Kconfig for non-DMA mode

PCH_DMA is not always enabled when a user uses PCH_UART.
Since overhead of DMA is not small, in case of low frequent
communication, without DMA is better.
Thus, "select PCH_DMA" and DMADEVICES are unnecessary

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: pch_uart: support new device ML7213
Tomoya MORINAGA [Fri, 28 Jan 2011 09:00:01 +0000]
serial: pch_uart: support new device ML7213

Support ML7213 device of OKI SEMICONDUCTOR.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is completely compatible for Intel EG20T PCH.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years ago68328serial: remove unsed m68k_serial->tqueue_hangup
Tejun Heo [Mon, 24 Jan 2011 16:53:41 +0000]
68328serial: remove unsed m68k_serial->tqueue_hangup

m68k_serial->tqueue_hangup is unused.  Remove it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial-core: reset the console speed on resume
Yin Kangkai [Sun, 30 Jan 2011 03:15:30 +0000]
serial-core: reset the console speed on resume

On some platforms, we need to restore the console speed on resume even
it was not suspended (no_console_suspend), and on others we don't have
to do that.

So don't care about the "console_suspend_enabled" and unconditionally
reset the console speed if it is a console.

This is actually a redo of ba15ab0 (Set proper console speed on resume
if console suspend is disabled) from Deepak Saxena.  I also tried to
investigate more to find out if this change will break others, here is
what I've found out:

commit 891b9dd10764352926e1e107756aa229dfa2c210
Author: Jason Wang <jason77.wang@gmail.com>
    serial-core: restore termios settings when resume console ports

commit ca2e71aa8cfb0056ce720f3fd53f59f5fac4a3e1
Author: Jason Wang <jason77.wang@gmail.com>
    serial-core: skip call set_termios/console_start when no_console_suspend

commit 4547be7809a3b775ce750ec7f8b5748954741523
Author: Stanislav Brabec <sbrabec@suse.cz>
    serial-core: resume serial hardware with no_console_suspend

commit ba15ab0e8de0d4439a91342ad52d55ca9e313f3d
Author: Deepak Saxena <dsaxena@laptop.org>
    Set proper console speed on resume if console suspend is disabled

from ba15ab0, we learned that, even if the console suspend is disabled
(when no_console_suspend is set), we may still need to "reset the port
to the state it was in before we suspended."

Then with 4547be7, this piece of code is removed.

And then Jason Wang added that back in ca2e71a and 891b9dd, to fix
some breakage on OMAP3EVM platform. From ca2e71a we learned that the
"set_termios" things is actually needed by both console is suspended
and not suspended.

That's why I removed the console_suspended_enabled condition, and only
call console_start() when we actually suspeneded it.

I also noticed in this thread:
http://marc.info/?t=129079257100004&r=1&w=2, which talked about on
some platforms, UART HW will be cut power whether or not we set
no_console_suspend, and then on resume it does not work quite well. I
have a similar HW, and this patch fixed this issue, don't know if this
patch also works on their platforms.

[Update: Stanislav tested this patch on Zaurus and reported it improves the
situation. Thanks.]

CC: Greg KH <greg@kroah.com>
CC: Deepak Saxena <dsaxena@laptop.org>
CC: Jason Wang <jason77.wang@gmail.com>
CC: Stanislav Brabec <sbrabec@suse.cz>
CC: Daniel Drake <dsd@laptop.org>
Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: mrst_max3110: make buffer larger
Dan Carpenter [Tue, 25 Jan 2011 14:15:11 +0000]
serial: mrst_max3110: make buffer larger

This is used to store the spi_device ->modalias so they have to be the same
size.  SPI_NAME_SIZE is 32.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agotty_ldisc: don't use flush_scheduled_work()
Tejun Heo [Mon, 24 Jan 2011 16:54:12 +0000]
tty_ldisc: don't use flush_scheduled_work()

flush_scheduled_work() is scheduled to be deprecated.  Explicitly sync
flush the used work items instead.  Note that before this change,
flush_scheduled_work() wouldn't have properly flushed tty->buf.work if
it were on timer.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: omap-serial: Enable the UART wake-up bits always
Jarkko Nikula [Mon, 24 Jan 2011 15:51:22 +0000]
serial: omap-serial: Enable the UART wake-up bits always

OMAP can do also dynamic idling so wake-up enable register should be set
also while system is running. If UART_OMAP_WER is not set, then for instance
the RX activity cannot wake up the UART port that is sleeping.

This RX wake-up feature was working when the 8250 driver was used instead
of omap-serial. Reason for this is that the 8250 doesn't set the
UART_OMAP_WER and then arch/arm/mach-omap2/pm34xx.c ends up saving and
restoring the reset default which is the same than value
OMAP_UART_WER_MOD_WKUP here.

Fix this by moving the conditional UART_OMAP_WER write from serial_omap_pm
into serial_omap_startup where wake-up bits are set unconditionally.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoOMAP: Enable Magic SysRq on serial console ttyOx
Thomas Weber [Tue, 1 Feb 2011 07:30:41 +0000]
OMAP: Enable Magic SysRq on serial console ttyOx

Magic SysRq key is not working for OMAP on new serial
console ttyOx because SUPPORT_SYSRQ is not defined
for omap-serial.

This patch defines SUPPORT_SYSRQ in omap-serial and
enables handling of Magic SysRq character.

Further there is an issue of losing first break character.
Removing the reset of the lsr_break_flag fixes this issue.

Signed-off-by: Thomas Weber <weber@corscience.de>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
Tested-by: Manjunath G Kondaiah <manjugk@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: ifx6x60: expanded info available from platform data
Russ Gorby [Wed, 2 Feb 2011 20:56:58 +0000]
serial: ifx6x60: expanded info available from platform data

Some platform attributes (e.g. max_hz, use_dma) were being intuited
from the modem type. These things should be specified by the platform
data.

Added max_hz, use_dma to ifx_modem_platform_data definition,
replaced is_6160 w/ modem_type, and changed clients accordingly

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoserial: mfd: remove the timeout workaround for A0
Feng Tang [Wed, 12 Jan 2011 07:03:42 +0000]
serial: mfd: remove the timeout workaround for A0

This is kind of a revert for commit 669b7a0938e "hsu: add a periodic
timer to check dma rx channel", which is a workaround for a bug in A0
stepping silicon, where a dma rx data timeout is missing for some case.
Since new silicon has fixed it and the old version is phasing out, no
need to carry on it any more.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agotty: serial: bfin_sport_uart: fix signedness error
Vasiliy Kulikov [Mon, 17 Jan 2011 10:08:52 +0000]
tty: serial: bfin_sport_uart: fix signedness error

sport->port.irq is unsigned, check for <0 doesn't make sense.
Explicitly cast it to int to check for error.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoLinux 2.6.38-rc3
Linus Torvalds [Tue, 1 Feb 2011 03:05:49 +0000]
Linux 2.6.38-rc3

10 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Mon, 31 Jan 2011 23:41:02 +0000]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: NFSv4 readdir loses entries
  NFS: Micro-optimize nfs4_decode_dirent()
  NFS: Fix an NFS client lockdep issue
  NFS construct consistent co_ownerid for v4.1
  NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount
  NFS improve pnfs_put_deviceid_cache debug print
  NFS fix cb_sequence error processing
  NFS do not find client in NFSv4 pg_authenticate
  NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!"
  NFS: Prevent memory allocation failure in nfsacl_encode()
  NFS: nfsacl_{encode,decode} should return signed integer
  NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"
  NFS: Fix "kernel BUG at fs/aio.c:554!"
  NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds().
  NFS: fix handling of malloc failure during nfs_flush_multi()

10 years agoMerge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 31 Jan 2011 22:30:31 +0000]
Merge branch 'fixes' of /home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: smp_on_up: allow non-ARM SMP processors
  ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
  ARM: initrd: disable initrd if passed address overlaps reserved region
  ARM: footbridge: fix debug macros
  ARM: mmci: round down the bytes transferred on error
  ARM: mmci: complete the transaction on error
  ARM: 6642/1: mmci: calculate remaining bytes at error correctly

10 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 31 Jan 2011 22:27:55 +0000]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
  arm: omap2: mux: fix compile warning
  omap1: Simplify use of omap_irq_flags
  omap2+: Fix unused variable warning for omap_irq_base

10 years agokernel.h: fix kernel-doc warning
Randy Dunlap [Mon, 31 Jan 2011 17:29:14 +0000]
kernel.h: fix kernel-doc warning

Fix kernel-doc warning in kernel.h from commit 7ef88ad56145
("BUILD_BUG_ON: make it handle more cases"):

  Warning(include/linux/kernel.h:605): No description found for parameter 'condition'
  Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Mon, 31 Jan 2011 22:15:40 +0000]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: xfs_bmap_add_extent_delay_real should init br_startblock
  xfs: fix dquot shaker deadlock
  xfs: handle CIl transaction commit failures correctly
  xfs: limit extsize to size of AGs and/or MAXEXTLEN
  xfs: prevent extsize alignment from exceeding maximum extent size
  xfs: limit extent length for allocation to AG size
  xfs: speculative delayed allocation uses rounddown_power_of_2 badly
  xfs: fix efi item leak on forced shutdown
  xfs: fix log ticket leak on forced shutdown.

10 years agovirtio: update MAINTAINERS
Michael S. Tsirkin [Mon, 31 Jan 2011 06:16:20 +0000]
virtio: update MAINTAINERS

Patches should keep coming through Rusty but it helps if I'm Cc'd as
well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Mon, 31 Jan 2011 22:07:40 +0000]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
  usb: gadget: composite: avoid access beyond array max length
  USB: serial: handle Data Carrier Detect changes
  USB: gadget: Fix endpoint representation in ci13xxx_udc
  USB: gadget: Fix error path in ci13xxx_udc gadget probe function
  usb: pch_udc: Fix the worning log issue at gadget driver remove
  USB: serial: Updated support for ICOM devices
  USB: ehci-mxc: add work-around for efika mx/sb bug
  USB: unbreak ehci-mxc on otg port of i.MX27
  drivers: update to pl2303 usb-serial to support Motorola cables
  USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
  USB serial: add missing .usb_driver field in serial drivers
  USB: ehci-fsl: Fix 'have_sysif_regs' detection
  USB: g_printer: fix bug in module parameter definitions
  USB: g_printer: fix bug in unregistration
  USB: uss720: remove duplicate USB device
  MAINTAINERS: add ueagle-atm entry
  USB: EHCI: fix DMA deallocation bug
  USB: pch_udc: support new device ML7213 IOH
  usb: pch_udc: Fixed issue which does not work with g_serial
  usb: set ep_dev async suspend should be later than device_initialize
  ...

10 years agoMerge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Mon, 31 Jan 2011 22:06:31 +0000]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
  staging: r8712u: Add new device IDs
  staging: brcm80211: fix suspend/resume issue in brcmsmac
  staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
  Staging: iio: Aditional fixpoint formatted output bugfix
  staging: usbip: vhci: use urb->dev->portnum to find port
  staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
  staging: usbip: vhci: friendly log messages for connection errors
  staging: usbip: vhci: refuse to enqueue for dead connections
  staging: usbip: vhci: give back URBs from in-flight unlink requests
  staging: usbip: vhci: update reference count for usb_device
  staging: usbip: stub: update refcounts for devices and interfaces
  staging: tidspbridge: replace mbox callback with notifier_call
  staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
  Staging: speakup: &&/|| confusion in silent_store()
  iio: Fixpoint formatted output bugfix
  staging: rt2860: Fix incorrect netif_stop_queue usage warning
  staging: r8712u: Fix memory leak in firmware loading
  staging: tidspbridge: configure full L1 MMU range
  staging: rt2870sta: Add ID for Linksys WUSB100v2
  Staging: xgfib: put parenthesis in the right place
  ...

10 years agoMerge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Mon, 31 Jan 2011 22:05:19 +0000]
Merge branch 'tty-linus' of git://git./linux/kernel/git/gregkh/tty-2.6

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/serial: fix apbuart build
  n_hdlc: fix read and write locking
  serial: unbreak billionton CF card
  tty: use for_each_console() and WARN() on sysfs failures
  vt: fix issue when fbcon wants to takeover a second time.

Fix up trivial conflict in drivers/tty/tty_io.c

10 years agoARM: smp_on_up: allow non-ARM SMP processors
Russell King [Sun, 30 Jan 2011 16:40:20 +0000]
ARM: smp_on_up: allow non-ARM SMP processors

Allow non-ARM SMP processors to use the SMP_ON_UP feature.  CPUs
supporting SMP must have the new CPU ID format, so check for this first.
Then check for ARM11MPCore, which fails the MPIDR check.  Lastly check
the MPIDR reports multiprocessing extensions and that the CPU is part of
a multiprocessing system.

Cc: <stable@kernel.org>
Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
Russell King [Sun, 30 Jan 2011 11:29:40 +0000]
ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+

Ensure that the ISA/PCI IO space accessors are properly ordered on
ARMv6+ architectures.  These should always be ordered with respect to
all other accesses.

This also fixes __iormb() and __iowmb() not being visible to ioread/
iowrite if a platform defines its own MMIO accessors.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: initrd: disable initrd if passed address overlaps reserved region
Russell King [Sun, 30 Jan 2011 11:21:05 +0000]
ARM: initrd: disable initrd if passed address overlaps reserved region

Disable the initrd if the passed address already overlaps the reserved
region.  This avoids oopses on Netwinders when NeTTrom tells the kernel
that an initrd is located at mem+4MB, but this overlaps the BSS,
resulting in the kernels in-use BSS being freed.

This should be applied to v2.6.37-stable.

Cc: <stable@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: footbridge: fix debug macros
Russell King [Fri, 28 Jan 2011 20:57:57 +0000]
ARM: footbridge: fix debug macros

0ea1293 (arm: return both physical and virtual addresses from addruart)
changed the way the 'addruart' worked, making it return both the virt
and phys addresses.  Unfortunately, for footbridge, these were reversed.
Fix that.  Tested on Netwinder.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: mmci: round down the bytes transferred on error
Russell King [Sun, 30 Jan 2011 21:06:53 +0000]
ARM: mmci: round down the bytes transferred on error

We should not report incomplete blocks on error.  Return the number of
bytes successfully transferred, rounded down to the nearest block.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: mmci: complete the transaction on error
Russell King [Sun, 30 Jan 2011 21:03:50 +0000]
ARM: mmci: complete the transaction on error

When we encounter an error, make sure we complete the transaction
otherwise we'll leave the request dangling.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoMerge branch 'for-linus' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Mon, 31 Jan 2011 03:04:51 +0000]
Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"

10 years agoInput: rc-keymap - return KEY_RESERVED for unknown mappings
Dmitry Torokhov [Sat, 29 Jan 2011 07:33:29 +0000]
Input: rc-keymap - return KEY_RESERVED for unknown mappings

Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped
scancodes, but rather return KEY_RESERVED.

This fixes breakage with Ubuntu's input-kbd utility that stopped
returning full keymaps for remote controls.

Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mark Lord <kernel@teksavvy.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 31 Jan 2011 03:02:34 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - retry failed resets when reconnecting
  Input: synaptics - fix reconnect logic on MT devices
  Input: tegra-kbc - fix keymap entry for LeftMeta key
  Input: tegra-kbc - fix build error

10 years agoFix prlimit64 for suid/sgid processes
Kacper Kornet [Fri, 28 Jan 2011 23:21:04 +0000]
Fix prlimit64 for suid/sgid processes

Since check_prlimit_permission always fails in the case of SUID/GUID
processes, such processes are not able to read or set their own limits.
This commit changes this by assuming that process can always read/change
its own limits.

Signed-off-by: Kacper Kornet <kornet@camk.edu.pl>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agointel_scu_ipc: remove duplicated #include
Huang Weiyi [Fri, 28 Jan 2011 14:05:25 +0000]
intel_scu_ipc: remove duplicated #include

Remove duplicated #include('s) in
  drivers/platform/x86/intel_scu_ipc.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoNTFS: Fix invalid pointer dereference in ntfs_mft_record_alloc().
Anton Altaparmakov [Fri, 28 Jan 2011 20:45:28 +0000]
NTFS: Fix invalid pointer dereference in ntfs_mft_record_alloc().

In ntfs_mft_record_alloc() when mapping the new extent mft record with
map_extent_mft_record() we overwrite @m with the return value and on
error, we then try to use the old @m but that is no longer there as @m
now contains an error code instead so we crash when dereferencing the
error code as if it were a pointer.

The simple fix is to use a temporary variable to store the return value
thus preserving the original @m for later use.  This is a backport from
the commercial Tuxera-NTFS driver and is well tested...

Thanks go to Julia Lawall for pointing this out (whilst I had fixed it
in the commercial driver I had failed to fix it in the Linux kernel).

Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Mon, 31 Jan 2011 02:56:27 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: More crypto cleanup (try #2)
  CIFS: Add strictcache mount option
  CIFS: Implement cifs_strict_writev (try #4)
  [CIFS] Replace cifs md5 hashing functions with kernel crypto APIs

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas...
Linus Torvalds [Mon, 31 Jan 2011 02:55:38 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cmarinas/linux-2.6-cm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
  kmemleak: Allow kmemleak metadata allocations to fail
  kmemleak: remove memset by using kzalloc

10 years agoMerge branch 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6
Linus Torvalds [Mon, 31 Jan 2011 02:54:54 +0000]
Merge branch 'zerolen' of git://git./linux/kernel/git/jgarzik/misc-2.6

* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  Delete zero-length drivers/staging/vme/bridges/Module.symvers

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 31 Jan 2011 02:53:12 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: HDA: Fix automute on Thinkpad L412/L512
  ALSA: HDA: Fix dmesg output of HDMI supported bits
  ALSA: fix invalid hardware.h include in ac97c for AVR32 architecture
  ASoC: correct link specifications for corgi, poodle and spitz
  ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2s
  ASoC: Fix codec device id format used by some dai_links
  ALSA: azt3328 -  fix broken AZF_FMT_XLATE macro
  ALSA: Xonar, CS43xx: Don't overrun static array
  ASoC: Handle low measured DC offsets for wm_hubs devices
  ASoC: da8xx/omap-l1xx: match codec_name with i2c ids
  ASoC: WM8994: fix wrong value in tristate function
  ASoC: WM8995: Fix incorrect use of snd_soc_update_bits()

10 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Mon, 31 Jan 2011 02:51:28 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: set queue DMA alignment to sector size for ATAPI too
  libata: DVR-212D can't do SETXFER DVD-RW DVR-212D
  ahci: add HFLAG_YES_FBS and apply it to 88SE9128
  pata_hpt37x: inherit prereset() method for HPT374
  ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs
  pata_hpt37x: fold 'if' statement into 'switch'
  pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)
  pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...)
  pata_mpc52xx: inherit from ata_bmdma_port_ops

10 years agoMerge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra
Linus Torvalds [Mon, 31 Jan 2011 02:49:26 +0000]
Merge branch 'for-linus' of git://android.git./kernel/tegra

* 'for-linus' of git://android.git.kernel.org/kernel/tegra:
  ARM: tegra: clock: Add forward reference to struct clk
  ARM: tegra: irq: Rename gic pointers to avoid conflicts
  arm/tegra: Fix tegra irq_data conversion

10 years agoRevert "UBI: use mtd->writebufsize to set minimal I/O unit size"
Artem Bityutskiy [Sat, 29 Jan 2011 16:27:13 +0000]
Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"

This reverts commit a121f643993474548fe98144514c50dd4f3dbe76.

Unfortunately, this commit breaks UBIFS backward compatibility and
makes new UBIFS refuse older UBIFS-formatted media:

UBIFS error: validate_sb: min. I/O unit mismatch: 8 in superblock, 64 real

Thus, we have to revert this patch and work on a better solution.

Reported-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

10 years agoInput: synaptics - retry failed resets when reconnecting
Alexandre Peixoto Ferreira [Sat, 29 Jan 2011 06:05:14 +0000]
Input: synaptics - retry failed resets when reconnecting

On some machines, like Dell Studio XPS 16 (1640), touchpad fails to
respond to the standard query after first reset but may start
responding later, so let's repeat reset sequence several (3) times.

Signed-off-by: Alexandre Peixoto Ferreira <alexandref75@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

10 years agoInput: synaptics - fix reconnect logic on MT devices
Alexandre Peixoto Ferreira [Sat, 29 Jan 2011 06:05:14 +0000]
Input: synaptics - fix reconnect logic on MT devices

synaptics_set_advanced_gesture_mode() affect capabilities bits we should
perform comparison after calling this function, otherwise they will never
match and we will be forced to perform full reconnect.

Signed-off-by: Alexandre Peixoto Ferreira <alexandref75@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

10 years agoInput: tegra-kbc - fix keymap entry for LeftMeta key
Rakesh Iyer [Sat, 29 Jan 2011 06:05:14 +0000]
Input: tegra-kbc - fix keymap entry for LeftMeta key

Correct key mapping for Left Meta key.

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

10 years agoInput: tegra-kbc - fix build error
Rakesh Iyer [Sat, 29 Jan 2011 06:05:14 +0000]
Input: tegra-kbc - fix build error

Fix build error introduced by variable name change.

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

10 years agoNFS: NFSv4 readdir loses entries
Chuck Lever [Fri, 28 Jan 2011 17:41:05 +0000]
NFS: NFSv4 readdir loses entries

On recent 2.6.38-rc kernels, connectathon basic test 6 fails on
NFSv4 mounts of OpenSolaris with something like:

> ./test6: readdir
>  ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.12' dir entry, pass 0
>  ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.82' dir entry, pass 0
>  ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.164' dir entry, pass 0
>  ./test6: (/mnt/klimt/matisse.test) Test failed with 3 errors
> basic tests failed
> Tests failed, leaving /mnt/klimt mounted
> [cel@matisse cthon04]$

I narrowed the problem down to nfs4_decode_dirent() reporting that the
decode buffer had overflowed while decoding the entries for those
missing files.

verify_attr_len() assumes both it's pointer arguments reside on the
same page.  When these arguments point to locations on two different
pages, verify_attr_len() can report false errors.  This can happen now
that a large NFSv4 readdir result can span pages.

We have reasonably good checking in nfs4_decode_dirent() anyway, so
it should be safe to simply remove the extra checking.

At a guess, this was introduced by commit 6650239a, "NFS: Don't use
vm_map_ram() in readdir".

Cc: stable@kernel.org [2.6.37]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFS: Micro-optimize nfs4_decode_dirent()
Chuck Lever [Fri, 28 Jan 2011 17:40:55 +0000]
NFS: Micro-optimize nfs4_decode_dirent()

Make the decoding of NFSv4 directory entries slightly more efficient
by:

  1.  Avoiding unnecessary byte swapping when checking XDR booleans,
      and

  2.  Not bumping "p" when its value will be immediately replaced by
      xdr_inline_decode()

This commit makes nfs4_decode_dirent() consistent with similar logic
in the other two decode_dirent() functions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFS: Fix an NFS client lockdep issue
Trond Myklebust [Thu, 27 Jan 2011 19:55:39 +0000]
NFS: Fix an NFS client lockdep issue

There is no reason to be freeing the delegation cred in the rcu callback,
and doing so is resulting in a lockdep complaint that rpc_credcache_lock
is being called from both softirq and non-softirq contexts.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

10 years agoxfs: xfs_bmap_add_extent_delay_real should init br_startblock
bpm@sgi.com [Wed, 19 Jan 2011 17:41:58 +0000]
xfs: xfs_bmap_add_extent_delay_real should init br_startblock

When filling in the middle of a previous delayed allocation in
xfs_bmap_add_extent_delay_real, set br_startblock of the new delay
extent to the right to nullstartblock instead of 0 before inserting
the extent into the ifork (xfs_iext_insert), rather than setting
br_startblock afterward.

Adding the extent into the ifork with br_startblock=0 can lead to
the extent being copied into the btree by xfs_bmap_extent_to_btree
if we happen to convert from extents format to btree format before
updating br_startblock with the correct value.  The unexpected
addition of this delay extent to the btree can cause subsequent
XFS_WANT_CORRUPTED_GOTO filesystem shutdown in several
xfs_bmap_add_extent_delay_real cases where we are converting a delay
extent to real and unexpectedly find an extent already inserted.
For example:

911         case BMAP_LEFT_FILLING:
912                 /*
913                  * Filling in the first part of a previous delayed allocation.
914                  * The left neighbor is not contiguous.
915                  */
916                 trace_xfs_bmap_pre_update(ip, idx, state, _THIS_IP_);
917                 xfs_bmbt_set_startoff(ep, new_endoff);
918                 temp = PREV.br_blockcount - new->br_blockcount;
919                 xfs_bmbt_set_blockcount(ep, temp);
920                 xfs_iext_insert(ip, idx, 1, new, state);
921                 ip->i_df.if_lastex = idx;
922                 ip->i_d.di_nextents++;
923                 if (cur == NULL)
924                         rval = XFS_ILOG_CORE | XFS_ILOG_DEXT;
925                 else {
926                         rval = XFS_ILOG_CORE;
927                         if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff,
928                                         new->br_startblock, new->br_blockcount,
929                                         &i)))
930                                 goto done;
931                         XFS_WANT_CORRUPTED_GOTO(i == 0, done);

With the bogus extent in the btree we shutdown the filesystem at
931.  The conversion from extents to btree format happens when the
number of extents in the inode increases above ip->i_df.if_ext_max.
xfs_bmap_extent_to_btree copies extents from the ifork into the
btree, ignoring all delalloc extents which are denoted by
br_startblock having some value of nullstartblock.

SGI-PV: 1013221

Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>

10 years agoxfs: fix dquot shaker deadlock
Dave Chinner [Fri, 28 Jan 2011 00:20:46 +0000]
xfs: fix dquot shaker deadlock

Commit 368e136 ("xfs: remove duplicate code from dquot reclaim") fails
to unlock the dquot freelist when the number of loop restarts is
exceeded in xfs_qm_dqreclaim_one(). This causes hangs in memory
reclaim.

Rework the loop control logic into an unwind stack that all the
different cases jump into. This means there is only one set of code
that processes the loop exit criteria, and simplifies the unlocking
of all the items from different points in the loop. It also fixes a
double increment of the restart counter from the qi_dqlist_lock
case.

Reported-by: Malcolm Scott <lkml@malc.org.uk>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>

10 years agoxfs: handle CIl transaction commit failures correctly
Dave Chinner [Thu, 27 Jan 2011 02:23:28 +0000]
xfs: handle CIl transaction commit failures correctly

Failure to commit a transaction into the CIL is not handled
correctly. This currently can only happen when racing with a
shutdown and requires an explicit shutdown check, so it rare and can
be avoided. Remove the shutdown check and make the CIL commit a void
function to indicate it will always succeed, thereby removing the
incorrectly handled failure case.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>

10 years agoxfs: limit extsize to size of AGs and/or MAXEXTLEN
Dave Chinner [Thu, 27 Jan 2011 01:18:18 +0000]
xfs: limit extsize to size of AGs and/or MAXEXTLEN

The extent size hint can be set to larger than an AG. This means
that the alignment process can push the range to be allocated
outside the bounds of the AG, resulting in assert failures or
corrupted bmbt records. Similarly, if the extsize is larger than the
maximum extent size supported, the alignment process will produce
extents that are too large to fit into the bmbt records, resulting
in a different type of assert/corruption failure.

Fix this by limiting extsize at the time іt is set firstly to be
less than MAXEXTLEN, then to be a maximum of half the size of the
AGs in the filesystem for non-realtime inodes. Realtime inodes do
not allocate out of AGs, so don't have to be restricted by the size
of AGs.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>

10 years agoxfs: prevent extsize alignment from exceeding maximum extent size
Dave Chinner [Thu, 27 Jan 2011 01:17:58 +0000]
xfs: prevent extsize alignment from exceeding maximum extent size

When doing delayed allocation, if the allocation size is for a
maximally sized extent, extent size alignment can push it over this
limit. This results in an assert failure in xfs_bmbt_set_allf() as
the extent length is too large to find in the extent record.

Fix this by ensuring that we allow for space that extent size
alignment requires (up to 2 * (extsize -1) blocks as we have to
handle both head and tail alignment) when limiting the maximum size
of the extent.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>

10 years agoxfs: limit extent length for allocation to AG size
Dave Chinner [Thu, 27 Jan 2011 01:16:28 +0000]
xfs: limit extent length for allocation to AG size

Delayed allocation extents can be larger than AGs, so when trying to
convert a large range we may scan every AG inside
xfs_bmap_alloc_nullfb() trying to find an AG with a size larger than
an AG. We should stop when we find the first AG with a maximum
possible allocation size. This causes excessive CPU usage when there
are lots of AGs.

The same problem occurs when doing preallocation of a range larger
than an AG.

Fix the problem by limiting real allocation lengths to the maximum
that an AG can support. This means if we have empty AGs, we'll stop
the search at the first of them. If there are no empty AGs, we'll
still scan them all, but that is a different problem....

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>

10 years agoxfs: speculative delayed allocation uses rounddown_power_of_2 badly
Dave Chinner [Thu, 27 Jan 2011 01:14:12 +0000]
xfs: speculative delayed allocation uses rounddown_power_of_2 badly

rounddown_power_of_2() returns an undefined result when passed a
value of zero. The specualtive delayed allocation code is doing this
when the inode is zero length. Hence occasionally the preallocation
is much, much larger than is necessary (e.g. 8GB for a 270 _byte_
file). Ensure we don't even pass a zero value to this function so
the result of preallocation is always the desired size.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>

10 years agoxfs: fix efi item leak on forced shutdown
Dave Chinner [Thu, 27 Jan 2011 01:13:35 +0000]
xfs: fix efi item leak on forced shutdown

After test 139, kmemleak shows:

unreferenced object 0xffff880078b405d8 (size 400):
  comm "xfs_io", pid 4904, jiffies 4294909383 (age 1186.728s)
  hex dump (first 32 bytes):
    60 c1 17 79 00 88 ff ff 60 c1 17 79 00 88 ff ff  `..y....`..y....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81afb04d>] kmemleak_alloc+0x2d/0x60
    [<ffffffff8115c6cf>] kmem_cache_alloc+0x13f/0x2b0
    [<ffffffff814aaa97>] kmem_zone_alloc+0x77/0xf0
    [<ffffffff814aab2e>] kmem_zone_zalloc+0x1e/0x50
    [<ffffffff8147cd6b>] xfs_efi_init+0x4b/0xb0
    [<ffffffff814a4ee8>] xfs_trans_get_efi+0x58/0x90
    [<ffffffff81455fab>] xfs_bmap_finish+0x8b/0x1d0
    [<ffffffff814851b4>] xfs_itruncate_finish+0x2c4/0x5d0
    [<ffffffff814a970f>] xfs_setattr+0x8df/0xa70
    [<ffffffff814b5c7b>] xfs_vn_setattr+0x1b/0x20
    [<ffffffff8117dc00>] notify_change+0x170/0x2e0
    [<ffffffff81163bf6>] do_truncate+0x66/0xa0
    [<ffffffff81163d0b>] sys_ftruncate+0xdb/0xe0
    [<ffffffff8103a002>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff

The cause of the leak is that the "remove" parameter of IOP_UNPIN()
is never set when a CIL push is aborted. This means that the EFI
item is never freed if it was in the push being cancelled. The
problem is specific to delayed logging, but has uncovered a couple
of problems with the handling of IOP_UNPIN(remove).

Firstly, we cannot safely call xfs_trans_del_item() from IOP_UNPIN()
in the CIL commit failure path or the iclog write failure path
because for delayed loging we have no transaction context. Hence we
must only call xfs_trans_del_item() if the log item being unpinned
has an active log item descriptor.

Secondly, xfs_trans_uncommit() does not handle log item descriptor
freeing during the traversal of log items on a transaction. It can
reference a freed log item descriptor when unpinning an EFI item.
Hence it needs to use a safe list traversal method to allow items to
be removed from the transaction during IOP_UNPIN().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>

10 years agoDelete zero-length drivers/staging/vme/bridges/Module.symvers
Jeff Garzik [Fri, 28 Jan 2011 08:23:42 +0000]
Delete zero-length drivers/staging/vme/bridges/Module.symvers

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agolibata: set queue DMA alignment to sector size for ATAPI too
Tejun Heo [Thu, 20 Jan 2011 12:59:06 +0000]
libata: set queue DMA alignment to sector size for ATAPI too

ata_pio_sectors() expects buffer for each sector to be contained in a
single page; otherwise, it ends up overrunning the first page.  This
is achieved by setting queue DMA alignment.  If sector_size is smaller
than PAGE_SIZE and all buffers are sector_size aligned, buffer for
each sector is always contained in a single page.

This wasn't applied to ATAPI devices but IDENTIFY_PACKET is executed
as ATA_PROT_PIO and thus uses ata_pio_sectors().  Newer versions of
udev issue IDENTIFY_PACKET with unaligned buffer triggering the
problem and causing oops.

This patch fixes the problem by setting sdev->sector_size to
ATA_SECT_SIZE on ATATPI devices and always setting DMA alignment to
sector_size.  While at it, add a warning for the unlikely but still
possible scenario where sector_size is larger than PAGE_SIZE, in which
case the alignment wouldn't be enough.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: John Stanley <jpsinthemix@verizon.net>
Tested-by: John Stanley <jpsinthemix@verizon.net>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agolibata: DVR-212D can't do SETXFER DVD-RW DVR-212D
Francesco Antonacci [Tue, 25 Jan 2011 10:54:43 +0000]
libata: DVR-212D can't do SETXFER DVD-RW DVR-212D

PIONEER DVR-212D can't do SETXFER like its sibling DVRTD08.  Add
ATA_HORKAGE_NOSETXFER for it.  Reported in bko#27502.

  https://bugzilla.kernel.org/show_bug.cgi?id=27502

Signed-off-by: Francesco Antonacci <fraanto@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agoahci: add HFLAG_YES_FBS and apply it to 88SE9128
Anssi Hannula [Wed, 19 Jan 2011 01:03:26 +0000]
ahci: add HFLAG_YES_FBS and apply it to 88SE9128

Commit 5f173107ecad83a50 added HFLAG_YES_FBS workaround for 88SE9128
(1b4b:9123).

However, that change inadvertently caused the legacy IDE interface of
the controller (with the same pci id) to become associated with the AHCI
driver as well, causing the driver to try to bring the interface up in
vain.

Fix that by matching against class as well.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agopata_hpt37x: inherit prereset() method for HPT374
Sergei Shtylyov [Tue, 11 Jan 2011 18:01:23 +0000]
pata_hpt37x: inherit prereset() method for HPT374

Commit ab81a505ae6be069be5b67acd7e1bab3cfb53968 (pata_hpt37x: unify ->pre_reset
methods) neglected to remove the initializer for the prereset() method from
'hpt374_fn1_port_ops' (it's inherited from 'hpt372_port_ops' anyway), as well
as to update the comment in hpt37x_init_one()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agoahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs
Seth Heasley [Mon, 10 Jan 2011 20:57:17 +0000]
ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs

This patch adds the AHCI-mode SATA DeviceID for the Intel DH89xxCC PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agopata_hpt37x: fold 'if' statement into 'switch'
Sergei Shtylyov [Mon, 10 Jan 2011 19:31:13 +0000]
pata_hpt37x: fold 'if' statement into 'switch'

hpt37x_init_one() has a large *if* statement which should really be folded into
the *switch* statement that currently constitutes its *else* branch, reducing
one level of indentation...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agopata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)
Sergei Shtylyov [Mon, 10 Jan 2011 18:39:34 +0000]
pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)

... the same as the 'pata_hpt366' driver does.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agopata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...)
Sergei Shtylyov [Mon, 10 Jan 2011 18:34:27 +0000]
pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...)

... in hpt_dma_blacklisted().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agopata_mpc52xx: inherit from ata_bmdma_port_ops
Tejun Heo [Sun, 9 Jan 2011 22:48:20 +0000]
pata_mpc52xx: inherit from ata_bmdma_port_ops

pata_mpc52xx supports BMDMA but inherits ata_sff_port_ops which
triggers BUG_ON() when a DMA command is issued.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Roman Fietze <roman.fietze@telemotive.de>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Fri, 28 Jan 2011 07:25:43 +0000]
Merge branch 'fix/asoc' into for-linus

10 years agoMerge branch 'stable/bug-fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 28 Jan 2011 02:24:34 +0000]
Merge branch 'stable/bug-fixes-rc2' of git://git./linux/kernel/git/konrad/xen

* 'stable/bug-fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/setup: Route halt operations to safe_halt pvop.
  xen/e820: Guard against E820_RAM not having page-aligned size or start.
  xen/p2m: Mark INVALID_P2M_ENTRY the mfn_list past max_pfn.

10 years agoExport the augmented rbtree helper functions
Andreas Gruenbacher [Wed, 26 Jan 2011 14:55:36 +0000]
Export the augmented rbtree helper functions

The augmented rbtree helper functions are not exported to modules right
now.

(We have started using augmented rbtrees in the upcoming version of
drbd.)

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Fri, 28 Jan 2011 02:12:58 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: avoid picking MDS that is not active
  ceph: avoid immediate cap check after import
  ceph: fix flushing of caps vs cap import
  ceph: fix erroneous cap flush to non-auth mds
  ceph: fix cap_wanted_delay_{min,max} mount option initialization
  ceph: fix xattr rbtree search
  ceph: fix getattr on directory when using norbytes

10 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 28 Jan 2011 02:10:13 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/nv50: fix regression on IGPs
  drm/radeon/kms: re-emit full context state for evergreen blits
  drm/radeon/kms: release CMASK access in preclose_kms
  drm/radeon/kms: fix r6xx+ scanout on BE systems
  drm/radeon/kms: clean up some magic numbers
  drm/radeon/kms: only enable HDMI mode if radeon audio is enabled
  radeon/kms: fix dp displayport mode validation
  drm/nvc0/grctx: correct an off-by-one
  drm/nv50: Fix race with PFIFO during PGRAPH context destruction.
  drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.
  drm/nvc0: implement irq handler for whatever's at 0x14xxxx
  drm/nvc0: fix incorrect TPC register setup
  drm/nouveau: probe for adt7473 before f75375
  drm/nouveau: remove dead function definition

10 years agoMerge branch 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2...
Dave Airlie [Fri, 28 Jan 2011 01:12:53 +0000]
Merge branch 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

* 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6:
  drm/nv50: fix regression on IGPs

10 years agodrm/nv50: fix regression on IGPs
Ben Skeggs [Thu, 27 Jan 2011 00:42:50 +0000]
drm/nv50: fix regression on IGPs

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

10 years agodrm/radeon/kms: re-emit full context state for evergreen blits
Alex Deucher [Thu, 27 Jan 2011 22:01:52 +0000]
drm/radeon/kms: re-emit full context state for evergreen blits

clear state doesn't seem to work properly in some cases

Fixes hangs in heavy 3D on some evergreen cards reported on
IRC.

May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=33381
possibly others.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@gmail.com>

10 years agodrm/radeon/kms: release CMASK access in preclose_kms
Marek Olšák [Thu, 27 Jan 2011 21:46:15 +0000]
drm/radeon/kms: release CMASK access in preclose_kms

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>

10 years agoarch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
Julia Lawall [Thu, 27 Jan 2011 15:49:06 +0000]
arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR

This code elsewhere returns a negative constant to an indicate an error,
while IS_ERR returns the result of a >= operation.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x;
@@

 if (...) { ...
- return IS_ERR(x);
+ return PTR_ERR(x);
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

10 years agoarm: omap2: mux: fix compile warning
Felipe Balbi [Mon, 17 Jan 2011 04:31:18 +0000]
arm: omap2: mux: fix compile warning

Commit 8419fdbaf2118a0a169441be82f09f7be93a5ca1
(omap2+: Add omap_mux_get_by_name) introduced the following
compile warning:

arch/arm/mach-omap2/mux.c: In function '_omap_mux_get_by_name':
arch/arm/mach-omap2/mux.c:163:17: warning: 'found_mode' may be used
uninitialized in this function

Signed-off-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>

10 years agoomap1: Simplify use of omap_irq_flags
Tony Lindgren [Thu, 27 Jan 2011 23:52:16 +0000]
omap1: Simplify use of omap_irq_flags

Commit 03a9e5126147c9f92aeba4b34f62b15b625087fb
(omap1: Use asm_irq_flags for entry-macro.S) added support
for multi-omap builds with addition of the omap_irq_flags.

Commit 9f9605c2eda9679e6f63c605cbd9cbf6a9a7f3fa
(omap2+: Fix unused variable warning for omap_irq_base)
simplified omap2+ entry-macro.S by moving omap_irq_flags
out of entry-macro.S.

Simplify omap1 entry-macro.S in a similar way to keep the
code consistent. Based on a similar earlier patch for omap2+
by Russell King <rmk+kernel@arm.linux.org.uk>.

Signed-off-by: Tony Lindgren <tony@atomide.com>

10 years agoomap2+: Fix unused variable warning for omap_irq_base
Russell King [Fri, 7 Jan 2011 11:57:44 +0000]
omap2+: Fix unused variable warning for omap_irq_base

Commit 5d190c40100793a6dfc37bf325677c10f3c80edf
(omap2+: Initialize omap_irq_base for entry-macro.S from
platform code) simplified the handling of omap_irq_base
for multi-omap builds. However, this patch also introduced
a build warning for !MULTI_OMAP2 builds:

arch/arm/mach-omap2/io.c: In function 'omap_irq_base_init':
arch/arm/mach-omap2/io.c:322: warning: unused variable 'omap_irq_base'

Fix this by removing the ifdef. Also simplify things further
by moving omap_irq_base out of entry-macro.S.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>

10 years agoARM: 6642/1: mmci: calculate remaining bytes at error correctly
Linus Walleij [Thu, 27 Jan 2011 16:44:34 +0000]
ARM: 6642/1: mmci: calculate remaining bytes at error correctly

The MMCIDATACNT register contain the number of byte left at error
not the number of words, so loose the << 2 thing. Further if CRC
fails on the first block, we may end up with a negative number
of transferred bytes which is not good, and the formula was in
wrong order.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 27 Jan 2011 20:45:04 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Use rq->clock_task instead of rq->clock for correctly maintaining load averages
  sched: Fix/remove redundant cfs_rq checks
  sched: Fix sign under-flows in wake_affine

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 27 Jan 2011 20:43:41 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  percpu, x86: Fix percpu_xchg_op()
  x86: Remove left over system_64.h
  x86-64: Don't use pointer to out-of-scope variable in dump_trace()

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Thu, 27 Jan 2011 20:39:08 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: bfin_sdh: fix alloc size for private data
  mmc: sdhci-s3c: add platform_8bit_width() hook
  mmc: jz4740: don't treat NULL clk as an error
  mmc: mmci: don't read command response when invalid
  mmc: ushc: Remove duplicate include of usb.h