11 years agoARM: 5774/1: Fix Realview ARM1176PB board reboot
Philby John [Wed, 28 Oct 2009 18:09:12 +0000]
ARM: 5774/1: Fix Realview ARM1176PB board reboot

This is the fix for proper reboot of Realview ARM1176PB board
when issuing the reboot command. Setting the eighth bit of
control register SYS_RESETCTL to 1 to force a soft reset.
arch_reset() is modified for realview machines to call machine
specific reset function pointers.

Signed-off-by: Philby John <pjohn@in.mvista.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: Fix errata 411920 workarounds
Russell King [Sat, 24 Oct 2009 21:36:36 +0000]
ARM: Fix errata 411920 workarounds

Errata 411920 indicates that any "invalidate entire instruction cache"
operation can fail if the right conditions are present.  This is not
limited just to those operations in flush.c, but elsewhere.  Place the
workaround in the already existing __flush_icache_all() function
instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: Fix sparsemem with SPARSEMEM_EXTREME enabled
Russell King [Thu, 29 Oct 2009 17:06:17 +0000]
ARM: Fix sparsemem with SPARSEMEM_EXTREME enabled

When SPARSEMEM_EXTREME is enabled, memory_present() wants to use bootmem
to allocate data structures.  However, we call memory_present() after
declaring memory to bootmem, but before we've reserved areas.

This leads to sparsemem data structures being overwritten later in the
kernel's initialization (when slab initializes.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: Use GFP_DMA only for masks _less_ than 32-bit
Russell King [Sun, 25 Oct 2009 22:36:10 +0000]
ARM: Use GFP_DMA only for masks _less_ than 32-bit

We were using GFP_DMA for masks other than 0xffffffff, which is
wrong when some masks are initialized to 0xffffffffffffffff.
This caused such masks to obtain memory from the precious DMA
pool.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: integrator: allow Integrator to be built with highmem
Russell King [Sun, 25 Oct 2009 22:42:38 +0000]
ARM: integrator: allow Integrator to be built with highmem

This fixes Integrator builds with highmem enabled; we need to
translate from 'struct page' to a DMA address, and this is not
possible without __pfn_to_bus().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: Fix signal restart issues with NX and OABI compat
Russell King [Sun, 25 Oct 2009 15:39:37 +0000]
ARM: Fix signal restart issues with NX and OABI compat

The signal restarting code was placed on the user stack when OABI
compatibility is enabled.  Unfortunately, with an EABI NX executable,
this results in an attempt to run code from the non-executable stack,
which segfaults the application.

Fix this by placing the code in the vectors page, along side the
signal return code, and directing the application to that code.

Reported-by: saeed bishara <saeed.bishara@gmail.com>
Tested-by: saeed bishara <saeed.bishara@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: Fix lubbock defconfig build
Russell King [Wed, 21 Oct 2009 12:20:32 +0000]
ARM: Fix lubbock defconfig build

drivers/built-in.o: In function `pxa25x_udc_probe':
drivers/usb/gadget/pxa25x_udc.c:2195: undefined reference to `otg_get_transceiver'
drivers/usb/gadget/pxa25x_udc.c:2300: undefined reference to `otg_put_transceiver'

pxa25x_udc.c unconditionally uses these two functions, so we need to
ensure that the object providing them is also built.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: 5769/1: CPU_ARM920T: remove dead Maverick EP9312 URL
Hartley Sweeten [Wed, 21 Oct 2009 01:27:01 +0000]
ARM: 5769/1: CPU_ARM920T: remove dead Maverick EP9312 URL

Remove the URL listed for Maverick EP9312 since it is not available
and modify the help text appropriately.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: 5768/1: ep93xx: remove dead code in ep93xx_gpio_ab_irq_handler()
Hartley Sweeten [Wed, 21 Oct 2009 01:21:20 +0000]
ARM: 5768/1: ep93xx: remove dead code in ep93xx_gpio_ab_irq_handler()

Remove unnecessary code in ep93xx_gpio_ab_irq_handler().

The desc calculation for gpio port B was left in when the following
commit was merged.

commit d8aa0251f12546e9bd1e9ee1d9782d6492819a04
Author: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date:   Thu Oct 9 13:36:24 2008 +0100

    [ARM] 5298/1: Drop desc_handle_irq()

It's not needed so remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: 5767/1: ep93xx: remove ep93xx_init_time() prototype
Hartley Sweeten [Wed, 21 Oct 2009 01:17:22 +0000]
ARM: 5767/1: ep93xx: remove ep93xx_init_time() prototype

Remove unused prototype for ep93xx_init_time().  This function
is not defined in the kernel.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: 5765/1: Updated U300 defconfig
Linus Walleij [Mon, 19 Oct 2009 20:29:28 +0000]
ARM: 5765/1: Updated U300 defconfig

This updates the U300 to use all the drivers merged in during the
2.6.32 merge window.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: 5766/1: Fix watchdog enabling for AT91SAM9G45
Yegor Yefremov [Tue, 20 Oct 2009 07:39:41 +0000]
ARM: 5766/1: Fix watchdog enabling for AT91SAM9G45

The macro for the watchdog has been changed from CONFIG_AT91SAM9_WATCHDOG
to CONFIG_AT91SAM9X_WATCHDOG due to AT91CAP9 chips support

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoARM: 5764/1: bcmring: add oprofile pmu support
Leo Chen [Thu, 15 Oct 2009 21:45:41 +0000]
ARM: 5764/1: bcmring: add oprofile pmu support

add oprofile pmu support for bcmring.

Signed-off-by: Leo Hao Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoMerge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
Russell King [Sat, 17 Oct 2009 15:29:01 +0000]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6

11 years ago[ARM] pxa/spitz: add gpio button support (fixes regression)
Stanislav Brabec [Fri, 16 Oct 2009 18:50:05 +0000]
[ARM] pxa/spitz: add gpio button support (fixes regression)

Updating desc for lid keys and resending patch with proper comments:
Define Spitz buttons as GPIO keys in a way compatible with the old driver:

On/Off: As Suspend EV_PWR key
Raw values of lid sensors SWA and SWB: As EV_SW switches
SWA: Display Down
SWB: Lid Closed
Recommended user space decoding:
SWA==0 & SWB==0: lid opened (landscape mode)
SWA==1 & SWB==0: invalid (or mechanic race condition)
SWA==0 & SWB==1: lid closed with display up (portrait mode or mechanic
                 race condition while closing to display-less mode)
SWA==1 & SWB==1: lid closed with display down (display-less mode)

AK_INT remote trigger is not mapped as input event. Without complete
remote driver and remote pull-up control it has no useful
interpretation.

Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

11 years ago[ARM] pxa/cm-x300: fix mmc numbering
Mike Rapoport [Thu, 15 Oct 2009 08:11:09 +0000]
[ARM] pxa/cm-x300: fix mmc numbering

CM-X300 has libertas on mmc2 and  SD card slot on mmc1.
This patch fixes wrong MMC ports assignment.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

11 years agoLinux 2.6.32-rc5
Linus Torvalds [Fri, 16 Oct 2009 00:41:50 +0000]
Linux 2.6.32-rc5

11 years agoMerge branch 'docs-next' of git://git.lwn.net/linux-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:21:42 +0000]
Merge branch 'docs-next' of git://git.lwn.net/linux-2.6

* 'docs-next' of git://git.lwn.net/linux-2.6:
  Update flex_arrays.txt

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
Linus Torvalds [Thu, 15 Oct 2009 22:21:20 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fix socket fd translation
  dlm: fix lowcomms_connect_node for sctp

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 15 Oct 2009 22:20:17 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "x86: linker script syntax nits"
  x86, perf_event: Rename 'performance counter interrupt'

11 years agoKEYS: get_instantiation_keyring() should inc the keyring refcount in all cases
David Howells [Thu, 15 Oct 2009 09:14:35 +0000]
KEYS: get_instantiation_keyring() should inc the keyring refcount in all cases

The destination keyring specified to request_key() and co. is made available to
the process that instantiates the key (the slave process started by
/sbin/request-key typically).  This is passed in the request_key_auth struct as
the dest_keyring member.

keyctl_instantiate_key and keyctl_negate_key() call get_instantiation_keyring()
to get the keyring to attach the newly constructed key to at the end of
instantiation.  This may be given a specific keyring into which a link will be
made later, or it may be asked to find the keyring passed to request_key().  In
the former case, it returns a keyring with the refcount incremented by
lookup_user_key(); in the latter case, it returns the keyring from the
request_key_auth struct - and does _not_ increment the refcount.

The latter case will eventually result in an oops when the keyring prematurely
runs out of references and gets destroyed.  The effect may take some time to
show up as the key is destroyed lazily.

To fix this, the keyring returned by get_instantiation_keyring() must always
have its refcount incremented, no matter where it comes from.

This can be tested by setting /etc/request-key.conf to:

#OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ...
#====== ======= =============== =============== ===============================
create  * test:* * |/bin/false %u %g %d %{user:_display}
negate * * * /bin/keyctl negate %k 10 @u

and then doing:

keyctl add user _display aaaaaaaa @u
        while keyctl request2 user test:x test:x @u &&
        keyctl list @u;
        do
                keyctl request2 user test:x test:x @u;
                sleep 31;
                keyctl list @u;
        done

which will oops eventually.  Changing the negate line to have @u rather than
%S at the end is important as that forces the latter case by passing a special
keyring ID rather than an actual keyring ID.

Reported-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Thu, 15 Oct 2009 22:15:03 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Fix MODPOST warning
  powerpc/oprofile: Add ppc750 CL as supported by oprofile
  powerpc: warning: allocated section `.data_nosave' not in segment
  powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'"
  powerpc: Fix hypervisor TLB batching
  powerpc/mm: Fix hang accessing top of vmalloc space
  powerpc: Fix memory leak in axon_msi.c
  powerpc/pmac: Fix issues with sleep on some powerbooks
  powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler
  powerpc/ftrace: show real return addresses in modules

11 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Thu, 15 Oct 2009 22:10:27 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI button: don't try to use a non-existent lid device
  ACPI: video: Loosen strictness of video bus detection code
  eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated
  eeepc-laptop: Properly annote eeepc_enable_camera().
  ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2)
  fujitsu-laptop: address missed led-class ifdef fixup
  ACPI: Kconfig, fix proc aggregator text
  ACPI: add AC/DC notifier

11 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 15 Oct 2009 22:09:55 +0000]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP2xxx clock: set up clockdomain pointer in struct clk
  OMAP: Fix race condition with autodeps
  omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
  omap: Initialization of SDRC params on Zoom2
  omap: RX-51: Drop I2C-1 speed to 2200
  omap: SDMA: Fixing bug in omap_dma_set_global_params()
  omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig

11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
Linus Torvalds [Thu, 15 Oct 2009 22:06:37 +0000]
Merge branch 'master' of git://git./linux/kernel/git/mason/btrfs-unstable

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: always pin metadata in discard mode
  Btrfs: enable discard support
  Btrfs: add -o discard option
  Btrfs: properly wait log writers during log sync
  Btrfs: fix possible ENOSPC problems with truncate
  Btrfs: fix btrfs acl #ifdef checks
  Btrfs: streamline tree-log btree block writeout
  Btrfs: avoid tree log commit when there are no changes
  Btrfs: only write one super copy during fsync

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:06:02 +0000]
Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty: fix vt_compat_ioctl

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:05:46 +0000]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  sysfs: Allow sysfs_notify_dirent to be called from interrupt context.
  sysfs: Allow sysfs_move_dir(..., NULL) again.

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:05:33 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: gadget: Fix EEM driver comments and VID/PID
  usb-storage: Workaround devices with bogus sense size
  USB: ehci: Fix IST boundary checking interval math.
  USB: option: Support for AIRPLUS MCD650 Datacard
  USB: whci-hcd: always do an update after processing a halted qTD
  USB: whci-hcd: handle early deletion of endpoints
  USB: wusb: don't use the stack to read security descriptor
  USB: rename Documentation/ABI/.../sysfs-class-usb_host

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:05:20 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: rt2860sta: prevent a panic when disabling when associated
  staging: more sched.h fixes
  Staging: et131x: Fix the add_10bit macro
  Staging: et131x: Correct WRAP bit handling
  staging: Complete sched.h removal from interrupt.h
  Staging: vme: fix sched.h build breakage
  Staging: poch: fix sched.h build breakage
  Staging: b3dfg: fix sched.h build breakage
  Staging: comedi: fix sched.h build breakage
  Staging: iio: Fix missing include <linux/sched.h>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 15 Oct 2009 22:03:17 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits)
  vmxnet: fix 2 build problems
  net: add support for STMicroelectronics Ethernet controllers.
  net: ks8851_mll uses mii interfaces
  net/fec_mpc52xx: Fix kernel panic on FEC error
  net: Fix OF platform drivers coldplug/hotplug when compiled as modules
  TI DaVinci EMAC: Clear statistics register properly.
  r8169: partial support and phy init for the 8168d
  irda/sa1100_ir: check return value of startup hook
  udp: Fix udp_poll() and ioctl()
  WAN: fix Cisco HDLC handshaking.
  tcp: fix tcp_defer_accept to consider the timeout
  3c574_cs: spin_lock the set_multicast_list function
  net: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs
  netxen: fix pci bar mapping
  ethoc: fix warning from 32bit build
  libertas: fix build
  net: VMware virtual Ethernet NIC driver: vmxnet3
  net: Fix IXP 2000 network driver building.
  libertas: fix build
  mac80211: document ieee80211_rx() context requirement
  ...

11 years agoMerge the right tty-fixes branch
Linus Torvalds [Thu, 15 Oct 2009 21:59:24 +0000]
Merge the right tty-fixes branch

* branch 'tty-fixes'
  tty: use the new 'flush_delayed_work()' helper to do ldisc flush
  workqueue: add 'flush_delayed_work()' to run and wait for delayed work
  tty: Make flush_to_ldisc() locking more robust

11 years agoARM: 5763/1: ARM: SMP: Fix the BUG with CONFIG_PREEMPT enabled
Santosh Shilimkar [Thu, 15 Oct 2009 14:06:47 +0000]
ARM: 5763/1: ARM: SMP: Fix the BUG with CONFIG_PREEMPT enabled

This patch fixes the BUG: using smp_processor_id() in preemptible
Below is the stripped backtrace.

BUG: using smp_processor_id() in preemptible [00000000] code: init/1
caller is flush_tlb_mm+0x44/0x70
Backtrace:
[<c00225c4>] (dump_backtrace+0x0/0x110) from [<c01713a0>] (dump_stack+0x18/0x1c)
 r7:00000000 r6:c00234f0 r5:00000001 r4:c7828000
[<c0171388>] (dump_stack+0x0/0x1c) from [<c0135364>] (debug_smp_processor_id+0xc0/0xf0)
[<c01352a4>] (debug_smp_processor_id+0x0/0xf0) from [<c00234f0>] (flush_tlb_mm+0x44/0x70)
 r7:00000000 r6:c60b41a0 r5:c60b4154 r4:00000001
[<c00234ac>] (flush_tlb_mm+0x0/0x70) from [<c0039568>] (dup_mm+0x304/0x38c)
 r5:c1f09058 r4:00000000
[<c0039264>] (dup_mm+0x0/0x38c) from [<c0039de4>] (copy_process+0x7b8/0xeb0)
[<c003962c>] (copy_process+0x0/0xeb0) from [<c003a638>] (do_fork+0x15c/0x29c)
[<c003a4dc>] (do_fork+0x0/0x29c) from [<c0021df0>] (sys_clone+0x34/0x3c)
[<c0021dbc>] (sys_clone+0x0/0x3c) from [<c001efa0>] (ret_fast_syscall+0x0/0x2c)

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

11 years agoUpdate flex_arrays.txt
Jonathan Corbet [Wed, 14 Oct 2009 18:43:22 +0000]
Update flex_arrays.txt

The 2.6.32 merge window brought a number of changes to the flexible array
API; this patch updates the documentation to match the new state of
affairs.

Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

11 years agoMerge branch 'for-rmk-rc' of git://git.pengutronix.de/git/imx/linux-2.6
Russell King [Thu, 15 Oct 2009 11:11:51 +0000]
Merge branch 'for-rmk-rc' of git://git.pengutronix.de/git/imx/linux-2.6

11 years agoRevert "x86: linker script syntax nits"
Ingo Molnar [Thu, 15 Oct 2009 06:08:12 +0000]
Revert "x86: linker script syntax nits"

This reverts commit e9a63a4e559fbdc522072281d05e6b13c1022f4b.

This breaks older binutils, where sink-less asserts are broken.

See this commit for further details:

  d2ba8b2: x86: Fix assert syntax in vmlinux.lds.S

Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4AD6523D.5030909@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'linus' into x86/urgent
Ingo Molnar [Thu, 15 Oct 2009 06:07:26 +0000]
Merge branch 'linus' into x86/urgent

Merge reason: pull in latest, to be able to revert a patch there.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'misc' into release
Len Brown [Thu, 15 Oct 2009 04:47:13 +0000]
Merge branch 'misc' into release

11 years agoMerge branch 'launchpad-333386' into release
Len Brown [Thu, 15 Oct 2009 04:46:57 +0000]
Merge branch 'launchpad-333386' into release

11 years agoMerge branch 'eeepc-laptop' into release
Len Brown [Thu, 15 Oct 2009 04:46:46 +0000]
Merge branch 'eeepc-laptop' into release

11 years agoMerge branch 'bugzilla-14129' into release
Len Brown [Thu, 15 Oct 2009 04:45:37 +0000]
Merge branch 'bugzilla-14129' into release

11 years agovmxnet: fix 2 build problems
Randy Dunlap [Thu, 15 Oct 2009 03:38:58 +0000]
vmxnet: fix 2 build problems

vmxnet3 uses in_dev* interfaces so it should depend on INET.
Also fix so that the driver builds when CONFIG_PCI_MSI is disabled.

vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy'

drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bhavesh davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoMerge commit 'ftrace/ppc' into merge
Benjamin Herrenschmidt [Thu, 15 Oct 2009 03:09:11 +0000]
Merge commit 'ftrace/ppc' into merge

11 years agoMerge branch '2_6_32rc4_fixes' of git://git.pwsan.com/linux-2.6 into omap-fixes-for...
Tony Lindgren [Wed, 14 Oct 2009 22:46:15 +0000]
Merge branch '2_6_32rc4_fixes' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus

11 years agotty: fix vt_compat_ioctl
Andreas Schwab [Mon, 28 Sep 2009 18:10:02 +0000]
tty: fix vt_compat_ioctl

Call compat_unimap_ioctl, not do_unimap_ioctl.

This was broken by commit e9216651.

The compat_unimap_ioctl was originally called do_unimap_ioctl in
fs/compat_ioctl.h which got moved to drivers/char/vt_ioctl.c.
In that patch, the caller was not updated and consequently called
the native handler.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoOMAP2xxx clock: set up clockdomain pointer in struct clk
Paul Walmsley [Wed, 14 Oct 2009 22:40:37 +0000]
OMAP2xxx clock: set up clockdomain pointer in struct clk

clock24xx.c is missing a omap2_init_clk_clkdm() in its
omap2_clk_init() function.  Among other bad effects, this causes the
OMAP hwmod layer to oops on boot.

Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano
Panella <Stefano.Panella@csr.com> for reporting this bug.  Thanks to Tony
Lindgren <tony@atomide.com> for N800 booting advice.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Carlos Aguiar <carlos.aguiar@indt.org.br>
Cc: Stefano Panella <Stefano.Panella@csr.com>
Cc: Tony Lindgren <tony@atomide.com>

11 years agoOMAP: Fix race condition with autodeps
Kalle Jokiniemi [Wed, 14 Oct 2009 22:40:37 +0000]
OMAP: Fix race condition with autodeps

There is a possible race condition in clockdomain
code handling hw supported idle transitions.

When multiple autodeps dependencies are being added
or removed, a transition of still remaining dependent
powerdomain can result in false readings of the
state counter. This is especially fatal for off mode
state counter, as it could result in a driver not
noticing a context loss.

Fixed by disabling hw supported state transitions
when autodeps are being changed.

Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Wed, 14 Oct 2009 22:36:19 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: provide fallback if mgt_ORB_timeout is missing
  ieee1394: add documentation entry to MAINTAINERS
  ieee1394: update URLs in debugging-via-ohci1394.txt

11 years agoMerge branch 'tty-fixes'
Linus Torvalds [Wed, 14 Oct 2009 22:34:55 +0000]
Merge branch 'tty-fixes'

* branch 'tty-fixes':
  tty: use the new 'flush_delayed_work()' helper to do ldisc flush
  workqueue: add 'flush_delayed_work()' to run and wait for delayed work
  Make flush_to_ldisc properly handle parallel calls

11 years agoMerge branch 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 14 Oct 2009 22:33:05 +0000]
Merge branch 'topic/x86-lds-nits' of git://git./linux/kernel/git/frob/linux-2.6-roland

* 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: linker script syntax nits

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 14 Oct 2009 22:31:48 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  watchdog: Fix rio watchdog probe function
  sparc64: Set IRQF_DISABLED on LDC channel IRQs.
  sparc64: Fix D-cache flushing on swapin from SW devices.
  sparc64: Fix niagara2 perf IRQ bits.

11 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Wed, 14 Oct 2009 22:31:15 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] sclp_vt220 build fix
  [S390] cio: change misleading console logic
  [S390] call home support: fix proc handler
  [S390] dasd: use idal for device characteristics
  [S390] Add highgprs facility to /proc/cpuinfo
  [S390] dasd: fix locking bug
  [S390] tape390: Fix request queue handling in block driver
  [S390] hypfs: Use subcode 6 if subcode 7 is not available

11 years agoMerge branch 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Wed, 14 Oct 2009 22:30:45 +0000]
Merge branch 'sh/for-2.6.32' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix a TRACE_IRQS_OFF typo.
  sh: Optimize the setup_rt_frame() I-cache flush.
  sh: Populate initial secondary CPU info from boot_cpu_data.
  sh: Tidy up SMP cpuinfo.
  sh: Use boot_cpu_data for FPU tests in sigcontext paths.
  sh: ftrace: Fix up syscall tracepoint support.
  sh: force dcache flush if dcache_dirty bit set.
  sh: update die() output.

11 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 14 Oct 2009 22:25:35 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  oprofile: warn on freeing event buffer too early
  oprofile: fix race condition in event_buffer free
  lockdep: Use cpu_clock() for lockstat

11 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 14 Oct 2009 22:25:23 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf events: Update MAINTAINERS entry file patterns
  perf tools: Remove static debugfs path from parse-events
  perf tools: Fix the NO_64BIT build on pure 64-bit systems
  perf tools: Fix const char type propagation

11 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 14 Oct 2009 22:25:04 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix missing kernel-doc notation
  Revert "x86, timers: Check for pending timers after (device) interrupts"
  sched: Update the clock of runqueue select_task_rq() selected

11 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 14 Oct 2009 22:24:51 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing/filters: Fix memory leak when setting a filter
  tracing: fix trace_vprintk call

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 14 Oct 2009 22:24:32 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/paravirt: Use normal calling sequences for irq enable/disable
  x86: fix kernel panic on 32 bits when profiling
  x86: Fix Suspend to RAM freeze on Acer Aspire 1511Lmi laptop
  x86, vmi: Mark VMI deprecated and schedule it for removal

11 years agosysfs: Allow sysfs_notify_dirent to be called from interrupt context.
Neil Brown [Tue, 15 Sep 2009 23:05:51 +0000]
sysfs: Allow sysfs_notify_dirent to be called from interrupt context.

sysfs_notify_dirent is a simple atomic operation that can be used to
alert user-space that new data can be read from a sysfs attribute.

Unfortunately it cannot currently be called from non-process context
because of its use of spin_lock which is sometimes taken with
interrupts enabled.

So change all lockers of sysfs_open_dirent_lock to disable interrupts,
thus making sysfs_notify_dirent safe to be called from non-process
context (as drivers/md does in md_safemode_timeout).

sysfs_get_open_dirent is (documented as being) only called from
process context, so it uses spin_lock_irq.  Other places
use spin_lock_irqsave.

The usage for sysfs_notify_dirent in md_safemode_timeout was
introduced in 2.6.28, so this patch is suitable for that and more
recent kernels.

Reported-by: Joel Andres Granados <jgranado@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agosysfs: Allow sysfs_move_dir(..., NULL) again.
Cornelia Huck [Tue, 6 Oct 2009 13:33:35 +0000]
sysfs: Allow sysfs_move_dir(..., NULL) again.

As device_move() and kobject_move() both handle a NULL destination,
sysfs_move_dir() should do this as well (again) and fall back to
sysfs_root in that case.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agotty: use the new 'flush_delayed_work()' helper to do ldisc flush
Linus Torvalds [Wed, 14 Oct 2009 16:20:41 +0000]
tty: use the new 'flush_delayed_work()' helper to do ldisc flush

This way all flush_to_ldisc work is always done through the workqueues,
and we thus have a single point of serialization.  It also means that we
can avoid calling flush_to_ldisc() entirely if there was no delayed work
pending.

[ Side note: using workqueues and keventd as the single way to enter
  flush_to_ldisc() still doesn't absolutely guarantee that we can't have
  concurrency: keventd is multithreaded and has a thread per CPU, and
  while the WORK_STRUCT_PENDING bit guarantees a single work only being
  on the pending list once, the work might be both pending and _running_
  at the same time. Workqueues are not simple. ]

This was also confirmed to fix bugzilla #14388, even without the earlier
locking fix and cleanup (commit c8e331419: "tty: Make flush_to_ldisc()
locking more robust").  So both commits fix the same bug differently,
and either would have worked on its own.  But I'm committing them both
since they are cleanups independent of each other.

Reported-and-tested-by: Boyan <btanastasov@yahoo.co.uk>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agonet: add support for STMicroelectronics Ethernet controllers.
Giuseppe Cavallaro [Wed, 14 Oct 2009 22:13:45 +0000]
net: add support for STMicroelectronics Ethernet controllers.

This is the driver for the ST MAC 10/100/1000 on-chip Ethernet
controllers (Synopsys IP blocks).

Driver documentation:
 o http://stlinux.com/drupal/kernel/network/stmmac
Revisions:
 o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions
Performances:
 o http://stlinux.com/drupal/benchmarks/networking/stmmac

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoworkqueue: add 'flush_delayed_work()' to run and wait for delayed work
Linus Torvalds [Wed, 14 Oct 2009 16:16:42 +0000]
workqueue: add 'flush_delayed_work()' to run and wait for delayed work

It basically turns a delayed work into an immediate work, and then waits
for it to finish, thus allowing you to force (and wait for) an immediate
flush of a delayed work.

We'll want to use this in the tty layer to clean up tty_flush_to_ldisc().

Acked-by: Oleg Nesterov <oleg@redhat.com>
[ Fixed to use 'del_timer_sync()' as noted by Oleg ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agonet: ks8851_mll uses mii interfaces
Randy Dunlap [Wed, 14 Oct 2009 22:10:58 +0000]
net: ks8851_mll uses mii interfaces

From: Randy Dunlap <randy.dunlap@oracle.com>

ks8851_mll uses mii interfaces so it needs to select MII.

ks8851_mll.c:(.text+0xf95ac): undefined reference to `generic_mii_ioctl'
ks8851_mll.c:(.text+0xf96a0): undefined reference to `mii_ethtool_gset'
ks8851_mll.c:(.text+0xf96fa): undefined reference to `mii_ethtool_sset'
ks8851_mll.c:(.text+0xf9754): undefined reference to `mii_link_ok'
ks8851_mll.c:(.text+0xf97ae): undefined reference to `mii_nway_restart'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet/fec_mpc52xx: Fix kernel panic on FEC error
John Bonesio [Wed, 14 Oct 2009 22:10:19 +0000]
net/fec_mpc52xx: Fix kernel panic on FEC error

The MDIO bus cannot be accessed at interrupt context, but on an FEC
error, the fec_mpc52xx driver reset function also tries to reset the
PHY.  Since the error is detected at IRQ context, and the PHY functions
try to sleep, the kernel ends up panicking.

Resetting the PHY on an FEC error isn't even necessary.  This patch
solves the problem by removing the PHY reset entirely.

Signed-off-by: John Bonesio <bones@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agotty: Make flush_to_ldisc() locking more robust
Linus Torvalds [Wed, 14 Oct 2009 15:59:49 +0000]
tty: Make flush_to_ldisc() locking more robust

The locking logic in this function is extremely subtle, and it broke
when we started doing potentially concurrent 'flush_to_ldisc()' calls in
commit e043e42bdb66885b3ac10d27a01ccb9972e2b0a3 ("pty: avoid forcing
'low_latency' tty flag").

The code in flush_to_ldisc() used to set 'tty->buf.head' to NULL, with
the intention that this would then cause any other concurrent calls to
not do anything (locking note: we have to drop the buf.lock over the
call to ->receive_buf that can block, which is why we can have
concurrency here at all in the first place).

It also used to set the TTY_FLUSHING bit, which would then cause any
concurrent 'tty_buffer_flush()' to not free all the tty buffers and
clear 'tty->buf.tail'.  And with 'buf.head' being NULL, and 'buf.tail'
being non-NULL, new data would never touch 'buf.head'.

Does that sound a bit too subtle? It was.  If another concurrent call to
'flush_to_ldisc()' were to come in, the NULL buf.head would indeed cause
it to not process the buffer list, but it would still clear TTY_FLUSHING
afterwards, making the buffer protection against 'tty_buffer_flush()' no
longer work.

So this clears it all up.  We depend purely on TTY_FLUSHING for handling
re-entrancy, and stop playing games with the buffer list entirely.  In
fact, the buffer list handling is now robust enough that we could
probably stop doing the whole "protect against 'tty_buffer_flush()'"
thing entirely.

However, Alan also points out that we would probably be better off
simplifying the locking even further, and just take the tty ldisc_mutex
around all the buffer flushing calls.  That seems like a good idea, but
in the meantime this is a conceptually minimal fix (with the patch
itself being bigger than required just to clean the code up and make it
readable).

This fixes keyboard trouble under X:

http://bugzilla.kernel.org/show_bug.cgi?id=14388

Reported-and-tested-by: Frédéric Meunier <fredlwm@gmail.com>
Reported-and-tested-by: Boyan <btanastasov@yahoo.co.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agonet: Fix OF platform drivers coldplug/hotplug when compiled as modules
Anton Vorontsov [Wed, 14 Oct 2009 21:54:52 +0000]
net: Fix OF platform drivers coldplug/hotplug when compiled as modules

Some OF platform drivers are missing module device tables, so they won't
load automatically on boot. This patch fixes the issue by adding proper
MODULE_DEVICE_TABLE() macros to the drivers.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoUSB: gadget: Fix EEM driver comments and VID/PID
Brian Niebuhr [Wed, 14 Oct 2009 17:04:33 +0000]
USB: gadget: Fix EEM driver comments and VID/PID

Remove expository comments and fix USB VID and PID

Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb-storage: Workaround devices with bogus sense size
Benjamin Herrenschmidt [Tue, 13 Oct 2009 04:53:47 +0000]
usb-storage: Workaround devices with bogus sense size

usb-storage: Workaround devices with bogus sense size

Some devices, such as Huawei E169, advertise more than the standard
amount of sense data, causing us to set US_FL_SANE_SENSE, assuming
they support it. However, they subsequently fail the request sense
with that size.

This works around it generically. When a sense request fails due to
a device returning an error, US_FL_SANE_SENSE was set, and that sense
request used a larger sense size, we retry with a smaller size before
giving up.

Based on an original patch by Ben Efros <ben@pc-doctor.com>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: ehci: Fix IST boundary checking interval math.
Sarah Sharp [Fri, 9 Oct 2009 19:28:41 +0000]
USB: ehci: Fix IST boundary checking interval math.

When the EHCI driver falls behind in its scheduling, the active stream's
first empty microframe may be in the past with respect to the current
microframe.  The code attempts to move the starting microframe ("start") N
number of microframes forward, where N is the interval of endpoint.
However, stream->interval is a copy of the endpoint's bInterval, which is
designated in frames for FS devices, and microframes for HS devices.
Convert stream->interval to microframes before using it to move the
starting microframe forward.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: option: Support for AIRPLUS MCD650 Datacard
Huzaifa Sidhpurwala [Mon, 12 Oct 2009 09:04:45 +0000]
USB: option: Support for AIRPLUS MCD650 Datacard

Here is a patch for Airplus MCD 650 card

Note: This device is with Victor V Kudlak, and he confirmed that this
device works with the patch.

Signed-off-by: Huzaifa Sidhpurwala <sidhpurwala.huzaifa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: whci-hcd: always do an update after processing a halted qTD
David Vrabel [Mon, 12 Oct 2009 15:45:16 +0000]
USB: whci-hcd: always do an update after processing a halted qTD

A halted qTD always triggers a hardware list update because the qset was
either removed or reactivated.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: whci-hcd: handle early deletion of endpoints
David Vrabel [Mon, 12 Oct 2009 15:45:15 +0000]
USB: whci-hcd: handle early deletion of endpoints

If an endpoint is deleted before it's been fully added to the hardware
list, the associated qset will not be fully initialized and an oops will
occur when complete(&qset->remove_complete) is called.  This can happen
if a queued URB is cancelled.

Fix this by only removing the qset from the hardware list if the
cancelled URB had qTDs.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: wusb: don't use the stack to read security descriptor
Stefano Panella [Mon, 12 Oct 2009 15:45:14 +0000]
USB: wusb: don't use the stack to read security descriptor

An urb's transfer buffer must be kmalloc'd memory and not point to the
stack or a DMA API warning results.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: rename Documentation/ABI/.../sysfs-class-usb_host
David Vrabel [Mon, 12 Oct 2009 15:45:13 +0000]
USB: rename Documentation/ABI/.../sysfs-class-usb_host

The usb_host class is no more.  Rename its documentation file (which
only contained WUSB specific files) to .../sysfs-class-uwb_rc-wusbhc.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agox86: linker script syntax nits
Roland McGrath [Wed, 14 Oct 2009 21:16:38 +0000]
x86: linker script syntax nits

The linker scripts grew some use of weirdly wrong linker script syntax.
It happens to work, but it's not what the syntax is documented to be.
Clean it up to use the official syntax.

Signed-off-by: Roland McGrath <roland@redhat.com>
CC: Ian Lance Taylor <iant@google.com>

11 years agoStaging: rt2860sta: prevent a panic when disabling when associated
Darren Salt [Wed, 14 Oct 2009 01:19:22 +0000]
Staging: rt2860sta: prevent a panic when disabling when associated

This fixes a panic which is triggered when the hardware "disappears" from
beneath the driver, i.e. when wireless is toggled off via Fn-F2 on various
EeePC models.

Ref. bug report http://bugzilla.kernel.org/show_bug.cgi?id=13390
          panic http://bugzilla.kernel.org/attachment.cgi?id=21928

Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agostaging: more sched.h fixes
Jeff Mahoney [Tue, 13 Oct 2009 00:28:11 +0000]
staging: more sched.h fixes

This patch contains more sched.h additions for drivers that built
fine under x86_64 but not i386 for some reason.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: et131x: Fix the add_10bit macro
Alan Cox [Mon, 12 Oct 2009 14:38:26 +0000]
Staging: et131x: Fix the add_10bit macro

Duh.. we need to preserve the wrap bit when adding.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: et131x: Correct WRAP bit handling
Alan Cox [Mon, 12 Oct 2009 14:38:17 +0000]
Staging: et131x: Correct WRAP bit handling

add_10bit loses the existing wrap value

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agostaging: Complete sched.h removal from interrupt.h
Jeff Mahoney [Mon, 12 Oct 2009 21:10:34 +0000]
staging: Complete sched.h removal from interrupt.h

Commit d43c36dc removed sched.h from interrupt.h and distributed sched.h
to users which needed it. This finishes it up for staging.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: vme: fix sched.h build breakage
Greg Kroah-Hartman [Mon, 12 Oct 2009 22:00:08 +0000]
Staging: vme: fix sched.h build breakage

commit d43c36dc removed sched.h from interrupt.h.  This broke the
vme drivers.  This patch fixes them.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: poch: fix sched.h build breakage
Greg Kroah-Hartman [Mon, 12 Oct 2009 21:59:56 +0000]
Staging: poch: fix sched.h build breakage

commit d43c36dc removed sched.h from interrupt.h.  This broke the
poch driver.  This patch fixes this.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: b3dfg: fix sched.h build breakage
Greg Kroah-Hartman [Mon, 12 Oct 2009 21:59:33 +0000]
Staging: b3dfg: fix sched.h build breakage

commit d43c36dc removed sched.h from interrupt.h.  This broke the
b3dfg driver.  This patch fixes this.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: comedi: fix sched.h build breakage
Greg Kroah-Hartman [Mon, 12 Oct 2009 21:58:16 +0000]
Staging: comedi: fix sched.h build breakage

commit d43c36dc removed sched.h from interrupt.h.  This broke some of
the comedi drivers.  This patch fixes this.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: iio: Fix missing include <linux/sched.h>
Jonathan Cameron [Mon, 12 Oct 2009 18:18:09 +0000]
Staging: iio: Fix missing include <linux/sched.h>

linux/sched.h include was removed form linux/poll.h by
commmit a99bbaf5ee6bad1aca0c88ea65ec6e5373e86184

Required for definition of TASK_INTERRUPTIBLE amongst others

From: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agofirewire: sbp2: provide fallback if mgt_ORB_timeout is missing
Stefan Richter [Wed, 7 Oct 2009 22:39:31 +0000]
firewire: sbp2: provide fallback if mgt_ORB_timeout is missing

The Unit_Characteristics entry of an SBP-2 unit directory is not
mandatory as far as I can tell.  If it is missing, we would probably
fail to log in into the target because firewire-sbp2 would not wait for
status after it sent the login request.

The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it
is executed exactly once before login, rather than 0..n times depending
on the target's config ROM.  With targets with one or more
Unit_Characteristics entries, the result is the same as before.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

11 years agoomap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
Jarkko Nikula [Wed, 14 Oct 2009 16:56:35 +0000]
omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop

This small typo written by author causes that McBSP receiver is disabled on
OMAP2430 and OMAP3430 even if only transmitter is stopped. This was noted
with ALSA SoC where simultaneous recording halted if playback was stopped
first.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

11 years agoomap: Initialization of SDRC params on Zoom2
Teerth Reddy [Wed, 14 Oct 2009 16:56:35 +0000]
omap: Initialization of SDRC params on Zoom2

This patch initializes the correct SDRC settings required
for DVFS on Zoom2.

Signed-off-by: Teerth Reddy <teerth@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

11 years agoomap: RX-51: Drop I2C-1 speed to 2200
Aaro Koskinen [Wed, 14 Oct 2009 16:56:34 +0000]
omap: RX-51: Drop I2C-1 speed to 2200

The I2C-1 bus frequency on RX-51 should be 2.2 MHz. The speed is limited
by TWL5030/GAIA; a higher speed could lead to errors on the interface. The
maximum speed depends on the system clock for GAIA: 2.2 MHz (if 19.2 MHz),
2.4 MHz (26 MHz) or 2.9 MHz (38.4 MHz).

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

11 years agoomap: SDMA: Fixing bug in omap_dma_set_global_params()
Anuj Aggarwal [Wed, 14 Oct 2009 16:56:34 +0000]
omap: SDMA: Fixing bug in omap_dma_set_global_params()

Argument tparams was not being used to program
global register GCR.HI_THREAD_RESERVED. This patch fixes the same.

Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

11 years agoomap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig
Sanjeev Premi [Wed, 14 Oct 2009 16:56:33 +0000]
omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig

The symbol CONFIG_ISP1301_OMAP was defined twice in the
defconfig. This was causing the warning:
arch/arm/configs/omap3_beagle_defconfig:972:warning:
 override: reassigning to symbol ISP1301_OMAP

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

11 years agotty: use the new 'flush_delayed_work()' helper to do ldisc flush
Linus Torvalds [Wed, 14 Oct 2009 16:20:41 +0000]
tty: use the new 'flush_delayed_work()' helper to do ldisc flush

This way all flush_to_ldisc work is always done through the workqueues,
and we thus have a single point of serialization.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoworkqueue: add 'flush_delayed_work()' to run and wait for delayed work
Linus Torvalds [Wed, 14 Oct 2009 16:16:42 +0000]
workqueue: add 'flush_delayed_work()' to run and wait for delayed work

It basically turns a delayed work into an immediate work, and then waits
for it to finish.

11 years agoMake flush_to_ldisc properly handle parallel calls
Linus Torvalds [Wed, 14 Oct 2009 15:59:49 +0000]
Make flush_to_ldisc properly handle parallel calls

11 years agoBtrfs: always pin metadata in discard mode
Chris Mason [Wed, 14 Oct 2009 13:38:28 +0000]
Btrfs: always pin metadata in discard mode

We have an optimization in btrfs to allow blocks to be
immediately freed if they were allocated in this transaction and never
written.  Otherwise they are pinned and freed when the transaction
commits.

This isn't optimal for discard mode because immediately freeing
them means immediately discarding them.  It is better to give the
block to the pinning code and letting the (slow) discard happen later.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: enable discard support
Christoph Hellwig [Wed, 14 Oct 2009 13:24:59 +0000]
Btrfs: enable discard support

The discard support code in btrfs currently is guarded by ifdefs for
BIO_RW_DISCARD, which is never defines as it's the name of an enum
memeber.  Just remove the useless ifdefs to actually enable the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: add -o discard option
Christoph Hellwig [Wed, 14 Oct 2009 13:24:59 +0000]
Btrfs: add -o discard option

Enable discard by default is not a good idea given the the trim speed
of SSD prototypes we've seen, and the carecteristics for many high-end
arrays.  Turn of discards by default and require the -o discard option
to enable them on.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: properly wait log writers during log sync
Yan, Zheng [Wed, 14 Oct 2009 13:24:59 +0000]
Btrfs: properly wait log writers during log sync

A recently fsync optimization make btrfs_sync_log skip calling
wait_for_writer in the single log writer case. This is incorrect
since the writer count can also be increased by btrfs_pin_log.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: fix possible ENOSPC problems with truncate
Josef Bacik [Tue, 13 Oct 2009 20:46:49 +0000]
Btrfs: fix possible ENOSPC problems with truncate

There's a problem where we don't do any space reservation for truncates, which
can cause you to OOPs because you will be allowed to go off in the weeds a bit
since we don't account for the delalloc bytes that are created as a result of
the truncate.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agox86, perf_event: Rename 'performance counter interrupt'
Li Hong [Wed, 14 Oct 2009 10:50:39 +0000]
x86, perf_event: Rename 'performance counter interrupt'

In 'cdd6c482c9ff9c55475ee7392ec8f672eddb7be6', we renamed
Performance Counters -> Performance Events.

The name showed up in /proc/interrupts also needs a change. I use
PMI (Performance monitoring interrupt) here, since it is the
official name used in Intel's documents.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091014105039.GA22670@uhli>
Signed-off-by: Ingo Molnar <mingo@elte.hu>