11 years agoia64: allocate percpu area for cpu0 like percpu areas for other cpus
Tejun Heo [Fri, 2 Oct 2009 04:28:56 +0000]
ia64: allocate percpu area for cpu0 like percpu areas for other cpus

cpu0 used special percpu area reserved by the linker, __cpu0_per_cpu,
which is set up early in boot by head.S.  However, this doesn't
guarantee that the area will be on the same node as cpu0 and the
percpu area for cpu0 ends up very far away from percpu areas for other
cpus which cause problems for congruent percpu allocator.

This patch makes percpu area initialization allocate percpu area for
cpu0 like any other cpus and copy it from __cpu0_per_cpu which now
resides in the __init area.  This means that for cpu0, percpu area is
first setup at __cpu0_per_cpu early by head.S and then moved to an
area in the linear mapping during memory initialization and it's not
allowed to take a pointer to percpu variables between head.S and
memory initialization.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64 <linux-ia64@vger.kernel.org>

11 years agoia64: initialize cpu maps early
Tejun Heo [Fri, 2 Oct 2009 04:28:56 +0000]
ia64: initialize cpu maps early

All information necessary to initialize cpu possible and present maps
are available once early_acpi_boot_init() is complete.  Reorganize
setup_arch() and acpi init functions such that,

* CPU information is printed after LAPIC entries are parsed in
  early_acpi_boot_init().

* smp_build_cpu_map() is called by setup_arch() instead of acpi
  functions.

* smp_build_cpu_map() is called once all CPU related information is
  available before memory is initialized.

This is primarily to allow find_memory() to use cpu maps but is also a
general cleanup.  Please note that with this change, the somewhat
ad-hoc early_cpu_possible_map defined and used for NUMA configurations
is probably unnecessary.  Something to clean up another day.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64 <linux-ia64@vger.kernel.org>

11 years agoia64: don't alias VMALLOC_END to vmalloc_end
Tejun Heo [Fri, 2 Oct 2009 04:28:55 +0000]
ia64: don't alias VMALLOC_END to vmalloc_end

If CONFIG_VIRTUAL_MEM_MAP is enabled, ia64 defines macro VMALLOC_END
as unsigned long variable vmalloc_end which is adjusted to prepare
room for vmemmap.  This becomes probnlematic if a local variables
vmalloc_end is defined in some function (not very unlikely) and
VMALLOC_END is used in the function - the function thinks its
referencing the global VMALLOC_END value but would be referencing its
own local vmalloc_end variable.

There's no reason VMALLOC_END should be a macro.  Just define it as an
unsigned long variable if CONFIG_VIRTUAL_MEM_MAP is set to avoid nasty
surprises.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64 <linux-ia64@vger.kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
Linus Torvalds [Fri, 2 Oct 2009 03:23:15 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/btrfs-unstable

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix data space leak fix
  Btrfs: remove duplicates of filemap_ helpers
  Btrfs: take i_mutex before generic_write_checks
  Btrfs: fix arguments to btrfs_wait_on_page_writeback_range
  Btrfs: fix deadlock with free space handling and user transactions
  Btrfs: fix error cases for ioctl transactions
  Btrfs: Use CONFIG_BTRFS_POSIX_ACL to enable ACL code
  Btrfs: introduce missing kfree
  Btrfs: Fix setting umask when POSIX ACLs are not enabled
  Btrfs: proper -ENOSPC handling

11 years agospi-imx: strip down chipselect function to only drive the chipselect
Uwe Kleine-König [Thu, 1 Oct 2009 22:44:33 +0000]
spi-imx: strip down chipselect function to only drive the chipselect

spi_imx_chipselect() made things that should be (and mostly are) done by
spi_imx_setupxfer.  Only setting the tx and rx functions was missing.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi-imx: initialize complete config struct
Uwe Kleine-König [Thu, 1 Oct 2009 22:44:32 +0000]
spi-imx: initialize complete config struct

Otherwise the config function uses random data from the stack.  This
didn't stick out because config is called once more in the chipselect
function with correct parameters.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi-imx: no need to assert bits_per_word being initialized
Uwe Kleine-König [Thu, 1 Oct 2009 22:44:31 +0000]
spi-imx: no need to assert bits_per_word being initialized

spi_imx_setup() is only called by spi_setup().  The latter does the
initialization already.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi-imx: setup mode_bits we can handle
Sascha Hauer [Thu, 1 Oct 2009 22:44:30 +0000]
spi-imx: setup mode_bits we can handle

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi-imx: fix initial chipselect settings
Sascha Hauer [Thu, 1 Oct 2009 22:44:29 +0000]
spi-imx: fix initial chipselect settings

We can only setup the gpio pins in spi_setup time when we know the
SPI_CS_HIGH setting.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi-imx: update state correctly
Sascha Hauer [Thu, 1 Oct 2009 22:44:29 +0000]
spi-imx: update state correctly

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi-imx: rename source file to spi_imx.c
Uwe Kleine-König [Thu, 1 Oct 2009 22:44:28 +0000]
spi-imx: rename source file to spi_imx.c

This makes the filename match the Kconfig symbol and the driver name.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoafs: remove cache.h
Christoph Hellwig [Thu, 1 Oct 2009 22:44:27 +0000]
afs: remove cache.h

It's just a wrapper for <linux/fscache.h>, so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agosscanf(): fix %*s%n
Andy Spencer [Thu, 1 Oct 2009 22:44:27 +0000]
sscanf(): fix %*s%n

When using %*s, sscanf should honor conversion specifiers immediately
following the %*s.  For example, the following code should find the
position of the end of the string "hello".

  int end;
  char buf[] = "hello    world";
  sscanf(buf, "%*s%n", &end);
  printf("%d\n", end);

Ideally, sscanf would advance the fmt and str pointers the same as it
would without the *, but the code for that is rather complicated and is
not included in the patch.

Signed-off-by: Andy Spencer <andy753421@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoserial: add parameter to force skipping the test for the TXEN bug
Chuck Ebbert [Thu, 1 Oct 2009 22:44:26 +0000]
serial: add parameter to force skipping the test for the TXEN bug

Allow users to force skipping the TXEN test at init time. Applies
to all serial ports. Intended for debugging only.

There is a blacklist for devices where we need to skip the test but the
list is not complete.  This lets users force skipping the test so we can
determine if they need to be added to the list.

Some HP machines with weird serial consoles have this problem and there
may be more.

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoserial167: fix read buffer overflow
Roel Kluin [Thu, 1 Oct 2009 22:44:25 +0000]
serial167: fix read buffer overflow

Check whether index is within bounds before grabbing the element.

Also, since NR_PORTS is defined ARRAY_SIZE(cy_port), cy_port[NR_PORTS] is
out of bounds as well.

[akpm@linux-foundation.org: cleanup, remove (long) casts]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agocyclades: fix read buffer overflow
Roel Kluin [Thu, 1 Oct 2009 22:44:24 +0000]
cyclades: fix read buffer overflow

irq is declared with size NR_CARDS (4), but the loop containing this
segment runs up until NR_ISA_ADDRS (16), possibly reading from irq[i] (and
trying to use the result)

Identified by the Parfait static scanner.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoicom: convert space to tabs
Breno Leitao [Thu, 1 Oct 2009 22:44:23 +0000]
icom: convert space to tabs

Convert spaces to tabs and remove wrong spaces

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Cc: Scott Kilau <Scott.Kilau@digi.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoserial_txx9: use container_of() instead of direct cast
Atsushi Nemoto [Thu, 1 Oct 2009 22:44:22 +0000]
serial_txx9: use container_of() instead of direct cast

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: add better support for no card detect or write protect available
Ben Dooks [Thu, 1 Oct 2009 22:44:21 +0000]
s3cmci: add better support for no card detect or write protect available

Add better support for omitting either the card detect or the write
protect GPIOs if the board does not support it.  Add the fields
no_wprotect and no_detect to the platform data which when set indicate the
absence of the respective GPIOs.

Note, this also fixes a minor bug where it tries to free IRQ0 if there is
no detect gpio available.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: make SDIO IRQ hardware IRQ support build-time configurable
Ben Dooks [Thu, 1 Oct 2009 22:44:20 +0000]
s3cmci: make SDIO IRQ hardware IRQ support build-time configurable

We have found a couple of boards where the SDIO IRQ hardware support has
failed to work properly, and thus we should make it configurable whether
or not to be included in the driver.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: DMA fixes
Ben Dooks [Thu, 1 Oct 2009 22:44:19 +0000]
s3cmci: DMA fixes

Fixes for the DMA transfer mode of the driver to try and improve the state
of the code:

- Ensure that dma_complete is set during the end of the command phase
  so that transfers do not stall awaiting the completion

- Update the DMA debugging to provide a bit more useful information
  such as how many DMA descriptors where not processed and print the
  DMA addresses in hexadecimal.

- Fix the DMA channel request code to actually request DMA for the
  S3CMCI block instead of whatever '0' signified.

- Add fallback to PIO if we cannot get the DMA channel, as many of the
  devices with this block only have a limited number of DMA channels.

- Only try and claim and free the DMA channel if we are trying to use it.

This improves the driver DMA code to the point where it can now identify a
card and read the partition table.  However the DMA can still stall when
trying to move data between the host and memory.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: Kconfig selection for PIO/DMA/Both
Ben Dooks [Thu, 1 Oct 2009 22:44:18 +0000]
s3cmci: Kconfig selection for PIO/DMA/Both

Add a selection for the data transfer mode of the s3cmci driver, allowing
for either a configuration or rumtime selection of the use of the DMA or
PIO transfer code.

The PIO only mode is 476 bytes smaller than the driver with both methods
compiled in.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: add SDIO IRQ support
Ben Dooks [Thu, 1 Oct 2009 22:44:18 +0000]
s3cmci: add SDIO IRQ support

The controller supports SDIO IRQ detection so add support for hardware
assisted SDIO interrupt detection for the SDIO core.  This improves the
response time for SDIO interrupts and thus the transfer rate from devices
such as the Marvel 8686.

As a note, it does seem that the controller will miss an IRQ than is held
asserted, so there are some manual checks to see if the SDIO interrupt is
active after a transfer.

Major testing on the S3C2440.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: add debugfs support for examining driver and hardware state
Ben Dooks [Thu, 1 Oct 2009 22:44:17 +0000]
s3cmci: add debugfs support for examining driver and hardware state

Export driver state and hardware register state via debugfs entries
created under a directory formed from dev_name() on the probed device when
CONFIG_DEBUG_FS is set.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: fix direct write to interrupt mask
Ben Dooks [Thu, 1 Oct 2009 22:44:16 +0000]
s3cmci: fix direct write to interrupt mask

The clear_imask() call should be used to clear the interrupt mask
register, as it may end up clearing the SDIO interrupt bit if this is
enabled.

Change all writes of zero to SDIIMSK register to use clear_imask() ready
for the SDIO updates.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: change to use dev_pm_ops
Ben Dooks [Thu, 1 Oct 2009 22:44:15 +0000]
s3cmci: change to use dev_pm_ops

Move to using dev_pm_ops for suspend and resume.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: change GPIO to gpiolib from S3C24XX specific calls
Ben Dooks [Thu, 1 Oct 2009 22:44:15 +0000]
s3cmci: change GPIO to gpiolib from S3C24XX specific calls

Move to using gpiolib to access the card detect and write protect GPIO
lines instead of using the platform speicifc s3c2410_gpio calls.

Also ensure that the card lines are claimed the same way to avoid overlap
with any other drivers.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: update probe to use new platform id list
Ben Dooks [Thu, 1 Oct 2009 22:44:14 +0000]
s3cmci: update probe to use new platform id list

Use the platform id list to match the three different versions of the
hardware block that this driver supports.

This will change the prefix of the console messages produced by this
driver to be prefixed by s3c-mci instead of the hardware block name, such
as s3c2440-mci.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agos3cmci: use resource_size() instead of local macro
Ben Dooks [Thu, 1 Oct 2009 22:44:13 +0000]
s3cmci: use resource_size() instead of local macro

Replace the local definition RESSIZE() with the standard resource_size()
call for getting the size of a struct resource.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomemcg: reduce check for softlimit excess
KAMEZAWA Hiroyuki [Thu, 1 Oct 2009 22:44:12 +0000]
memcg: reduce check for softlimit excess

In charge/uncharge/reclaim path, usage_in_excess is calculated repeatedly
and it takes res_counter's spin_lock every time.

This patch removes unnecessary calls for res_count_soft_limit_excess.

Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomemcg: some modification to softlimit under hierarchical memory reclaim.
KAMEZAWA Hiroyuki [Thu, 1 Oct 2009 22:44:11 +0000]
memcg: some modification to softlimit under hierarchical memory reclaim.

This patch clean up/fixes for memcg's uncharge soft limit path.

Problems:
  Now, res_counter_charge()/uncharge() handles softlimit information at
  charge/uncharge and softlimit-check is done when event counter per memcg
  goes over limit. Now, event counter per memcg is updated only when
  memory usage is over soft limit. Here, considering hierarchical memcg
  management, ancesotors should be taken care of.

  Now, ancerstors(hierarchy) are handled in charge() but not in uncharge().
  This is not good.

  Prolems:
  1. memcg's event counter incremented only when softlimit hits. That's bad.
     It makes event counter hard to be reused for other purpose.

  2. At uncharge, only the lowest level rescounter is handled. This is bug.
     Because ancesotor's event counter is not incremented, children should
     take care of them.

  3. res_counter_uncharge()'s 3rd argument is NULL in most case.
     ops under res_counter->lock should be small. No "if" sentense is better.

Fixes:
  * Removed soft_limit_xx poitner and checks in charge and uncharge.
    Do-check-only-when-necessary scheme works enough well without them.

  * make event-counter of memcg incremented at every charge/uncharge.
    (per-cpu area will be accessed soon anyway)

  * All ancestors are checked at soft-limit-check. This is necessary because
    ancesotor's event counter may never be modified. Then, they should be
    checked at the same time.

Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agocgroup: catch bad css refcnt at css_put
KAMEZAWA Hiroyuki [Thu, 1 Oct 2009 22:44:09 +0000]
cgroup: catch bad css refcnt at css_put

__css_put() doesn't check a bug as refcnt goes to minus.
I think it should be caught. This patch adds a check for it.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomemcg: fix refcnt going negative
KAMEZAWA Hiroyuki [Thu, 1 Oct 2009 22:44:08 +0000]
memcg: fix refcnt going negative

__mem_cgroup_largest_soft_limit_node() returns a mem_cgroup_per_zone "mz"
with incremnted mz->mem->css's refcnt.  Then, the caller of this function
has to call css_put(mz->mem->css).

But, mz can be !NULL even if "not found" i.e.  without css_get().  By
this, css->refcnt will go down to minus.

This may cause various things...one of results will be
initite-loop in css_tryget()  as this.

INFO: RCU detected CPU 0 stall (t=10000 jiffies)
sending NMI to all CPUs:
NMI backtrace for cpu 0
CPU 0:
<snip>

 <<EOE>>  <IRQ>  [<ffffffff810884bd>] trace_hardirqs_off+0xd/0x10
  [<ffffffff8102a940>] flat_send_IPI_mask+0x90/0xb0
  [<ffffffff8102a9c9>] flat_send_IPI_all+0x69/0x70
  [<ffffffff81027372>] arch_trigger_all_cpu_backtrace+0x62/0xa0
  [<ffffffff810bff8e>] __rcu_pending+0x7e/0x370
  [<ffffffff810c02c7>] rcu_check_callbacks+0x47/0x130
  [<ffffffff81063a26>] update_process_times+0x46/0x70
  [<ffffffff81085930>] tick_sched_timer+0x60/0x160
  [<ffffffff810858d0>] ? tick_sched_timer+0x0/0x160
  [<ffffffff8107a03a>] __run_hrtimer+0xba/0x150
  [<ffffffff8107a325>] hrtimer_interrupt+0xd5/0x1b0
  [<ffffffff81426dfe>] ? trace_hardirqs_off_thunk+0x3a/0x3c
  [<ffffffff8142cacd>] smp_apic_timer_interrupt+0x6d/0x9b
  [<ffffffff8100cb33>] apic_timer_interrupt+0x13/0x20
  <EOI>  [<ffffffff811317b6>] ? mem_cgroup_walk_tree+0x156/0x180
  [<ffffffff811316d3>] ? mem_cgroup_walk_tree+0x73/0x180
  [<ffffffff81131692>] ? mem_cgroup_walk_tree+0x32/0x180
  [<ffffffff81131a00>] ? mem_cgroup_get_local_stat+0x0/0x110
  [<ffffffff81131d5b>] ? mem_control_stat_show+0x14b/0x330
  [<ffffffff810a57fd>] ? cgroup_seqfile_show+0x3d/0x60

Above shows CPU0 caught in css_tryget()'s inifinite loop because
of bad refcnt.

This is a fix to set mz=NULL at the top of retry path.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agouartlite: allow building for timberdale MFD
Richard Röjfors [Thu, 1 Oct 2009 22:44:07 +0000]
uartlite: allow building for timberdale MFD

Some configurations of the Timberdale FPGA has the uartlite
included.

Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodocs: update patch size in SubmittingPatches
Randy Dunlap [Thu, 1 Oct 2009 22:44:06 +0000]
docs: update patch size in SubmittingPatches

This patch size comment is like so last millenium.  Update it to modern
times.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agosdio: pass whitelisted cis funce tuples to sdio drivers
Albert Herranz [Thu, 1 Oct 2009 22:44:05 +0000]
sdio: pass whitelisted cis funce tuples to sdio drivers

Some manufacturers provide vendor information in non-vendor specific CIS
tuples.  For example, Broadcom uses an Extended Function tuple to provide
the MAC address on some of their network cards, as in the case of the
Nintendo Wii WLAN daughter card.

This patch allows passing whitelisted FUNCE tuples unknown to the SDIO
core to a matching SDIO driver instead of rejecting them and failing.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm/rmap.c: fix comment
Huang Shijie [Thu, 1 Oct 2009 22:44:04 +0000]
mm/rmap.c: fix comment

The page_address_in_vma() is not only used in unuse_vma().

Signed-off-by: Huang Shijie <shijie8@gmail.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agox86: fix csum_ipv6_magic asm memory clobber
Samuel Thibault [Thu, 1 Oct 2009 22:44:02 +0000]
x86: fix csum_ipv6_magic asm memory clobber

Just like ip_fast_csum, the assembly snippet in csum_ipv6_magic needs a
memory clobber, as it is only passed the address of the buffer, not a
memory reference to the buffer itself.

This caused failures in Hurd's pfinetv4 when we tried to compile it with
gcc-4.3 (bogus checksums).

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomn10300: fix kernel build failures when using gcc-4.x
Mark Salter [Thu, 1 Oct 2009 22:44:01 +0000]
mn10300: fix kernel build failures when using gcc-4.x

Fix some build failures when using gcc-4.x for MN10300.

Firstly, __get_user() fails to build because the pointer points to a const and
__gu_val ends up being read-only:

In file included from include/linux/mempolicy.h:62,
                 from init/main.c:50:
include/linux/pagemap.h: In function 'fault_in_pages_readable':
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
make[1]: *** [init/main.o] Error 1

Secondly, gcc-4 doesn't allow casts of lvalues:

  UPD     include/linux/compile.h
arch/mn10300/kernel/rtc.c: In function 'calibrate_clock':
arch/mn10300/kernel/rtc.c:170: error: lvalue required as left operand of assignment
arch/mn10300/kernel/rtc.c:172: error: lvalue required as left operand of assignment
make[1]: *** [arch/mn10300/kernel/rtc.o] Error 1

These are seen with gcc 4.2.1.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMAINTAINERS: ARM/Palm file patterns
Joe Perches [Thu, 1 Oct 2009 22:43:59 +0000]
MAINTAINERS: ARM/Palm file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Tomas Cech <sleep_walker@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoChar: vt_ioctl, fix BKL imbalance
Jiri Slaby [Thu, 1 Oct 2009 22:43:59 +0000]
Char: vt_ioctl, fix BKL imbalance

Stanse found (again) a BKL imbalance in vt_ioctl.

It's easily triggerable by ioctl(dev_tty_fd, VT_SETACTIVATE, NULL);

Introduced by

commit d3b5cffcf84a8bdc7073dce4745d67c72629af85                                 Author: Alan Cox <alan@linux.intel.com>
Date:   Sat Sep 19 13:13:26 2009 -0700

    vt: add an activate and lock

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agorevert "m68k: convert to asm-generic/hardirq.h"
Andrew Morton [Thu, 1 Oct 2009 22:43:57 +0000]
revert "m68k: convert to asm-generic/hardirq.h"

Revert 45d80eea87c9f8292d2d33173d6866c0ec57238a ("m68k: convert to
asm-generic/hardirq.h") - it fails to compile due to an inclusion tangle:

In file included from include/linux/irq.h:12,
                 from include/asm-generic/hardirq.h:6,
                 from /usr/src/devel/arch/m68k/include/asm/hardirq_mm.h:6,
                 from /usr/src/devel/arch/m68k/include/asm/hardirq.h:4,
                 from include/linux/hardirq.h:10,
                 from /usr/src/devel/arch/m68k/include/asm/system_mm.h:69,
                 from /usr/src/devel/arch/m68k/include/asm/system.h:4,
                 from include/linux/list.h:7,
                 from include/linux/preempt.h:11,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:56,
                 from arch/m68k/kernel/asm-offsets.c:14:
include/linux/smp.h:17: error: field 'list' has incomplete type

Cc: Christoph Hellwig <hch@lst.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoasm-generic/gpio.h: pull in linux/kernel.h for might_sleep()
Mike Frysinger [Thu, 1 Oct 2009 22:43:56 +0000]
asm-generic/gpio.h: pull in linux/kernel.h for might_sleep()

The asm-generic/gpio.h header uses the might_sleep() macro but doesn't
include the header for it, so any source code that might include
linux/gpio.h before linux/kernel.h can easily lead to a build failure.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoconst: constify remaining file_operations
Alexey Dobriyan [Thu, 1 Oct 2009 22:43:56 +0000]
const: constify remaining file_operations

[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodrivers/input/input.c: fix CONFIG_PM=n warning
Andrew Morton [Thu, 1 Oct 2009 22:43:55 +0000]
drivers/input/input.c: fix CONFIG_PM=n warning

drivers/input/input.c:1277: warning: 'input_dev_reset' defined but not used

Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomodule: fix up CONFIG_KALLSYMS=n build.
Paul Mundt [Thu, 1 Oct 2009 22:43:54 +0000]
module: fix up CONFIG_KALLSYMS=n build.

Starting from commit 4a4962263f07d14660849ec134ee42b63e95ea9a "reduce
symbol table for loaded modules (v2)", the kernel/module.c build is broken
with CONFIG_KALLSYMS disabled.

CC kernel/module.o
kernel/module.c:1995: warning: type defaults to 'int' in declaration of 'Elf_Hdr'
kernel/module.c:1995: error: expected ';', ',' or ')' before '*' token
kernel/module.c: In function 'load_module':
kernel/module.c:2203: error: 'strmap' undeclared (first use in this function)
kernel/module.c:2203: error: (Each undeclared identifier is reported only once
kernel/module.c:2203: error: for each function it appears in.)
kernel/module.c:2239: error: 'symoffs' undeclared (first use in this function)
kernel/module.c:2239: error: implicit declaration of function 'layout_symtab'
kernel/module.c:2240: error: 'stroffs' undeclared (first use in this function)
make[1]: *** [kernel/module.o] Error 1
make: *** [kernel/module.o] Error 2

There are three different issues:

    - layout_symtab() takes a const Elf_Ehdr

    - layout_symtab() needs to return a value

    - symoffs/stroffs/strmap are referenced by the load_module() code
      despite being ifdefed out, which seems unnecessary given the noop
      behaviour of layout_symtab()/add_kallsyms() in the case of
      CONFIG_KALLSYMS=n.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
Chris Mason [Thu, 1 Oct 2009 21:24:44 +0000]
Merge branch 'master' of git://git./linux/kernel/git/mason/btrfs-unstable into for-linus

11 years agoBtrfs: fix data space leak fix
Josef Bacik [Thu, 1 Oct 2009 21:10:23 +0000]
Btrfs: fix data space leak fix

There is a problem where page_mkwrite can be called on a dirtied page that
already has a delalloc range associated with it.  The fix is to clear any
delalloc bits for the range we are dirtying so the space accounting gets
handled properly.  This is the same thing we do in the normal write case, so we
are consistent across the board.  With this patch we no longer leak reserved
space.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: remove duplicates of filemap_ helpers
Christoph Hellwig [Thu, 1 Oct 2009 16:58:30 +0000]
Btrfs: remove duplicates of filemap_ helpers

Use filemap_fdatawrite_range and filemap_fdatawait_range instead of
local copies of the functions.  For filemap_fdatawait_range that
also means replacing the awkward old wait_on_page_writeback_range
calling convention with the regular filemap byte offsets.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
Chris Mason [Thu, 1 Oct 2009 16:58:13 +0000]
Merge branch 'master' of git://git./linux/kernel/git/mason/btrfs-unstable into for-linus

11 years agoBtrfs: take i_mutex before generic_write_checks
Chris Mason [Thu, 1 Oct 2009 16:29:10 +0000]
Btrfs: take i_mutex before generic_write_checks

btrfs_file_write was incorrectly calling generic_write_checks without
taking i_mutex.  This lead to problems with racing around i_size when
doing O_APPEND writes.

The fix here is to move i_mutex higher.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: fix arguments to btrfs_wait_on_page_writeback_range
Christoph Hellwig [Wed, 30 Sep 2009 20:47:08 +0000]
Btrfs: fix arguments to btrfs_wait_on_page_writeback_range

wait_on_page_writeback_range/btrfs_wait_on_page_writeback_range takes
a pagecache offset, not a byte offset into the file.  Shift the arguments
around to wait for the correct range

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 1 Oct 2009 00:36:45 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ax25: Fix possible oops in ax25_make_new
  net: restore tx timestamping for accelerated vlans
  Phonet: fix mutex imbalance
  sit: fix off-by-one in ipip6_tunnel_get_prl
  net: Fix sock_wfree() race
  net: Make setsockopt() optlen be unsigned.

11 years agoax25: Fix possible oops in ax25_make_new
Jarek Poplawski [Sun, 27 Sep 2009 10:57:02 +0000]
ax25: Fix possible oops in ax25_make_new

In ax25_make_new, if kmemdup of digipeat returns an error, there would
be an oops in sk_free while calling sk_destruct, because sk_protinfo
is NULL at the moment; move sk->sk_destruct initialization after this.

BTW of reported-by: Bernard Pidoux F6BVP <f6bvp@free.fr>

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: restore tx timestamping for accelerated vlans
Eric Dumazet [Wed, 30 Sep 2009 23:42:42 +0000]
net: restore tx timestamping for accelerated vlans

Since commit 9b22ea560957de1484e6b3e8538f7eef202e3596
( net: fix packet socket delivery in rx irq handler )

We lost rx timestamping of packets received on accelerated vlans.

Effect is that tcpdump on real dev can show strange timings, since it gets rx timestamps
too late (ie at skb dequeueing time, not at skb queueing time)

14:47:26.986871 IP 192.168.20.110 > 192.168.20.141: icmp 64: echo request seq 1
14:47:26.986786 IP 192.168.20.141 > 192.168.20.110: icmp 64: echo reply seq 1

14:47:27.986888 IP 192.168.20.110 > 192.168.20.141: icmp 64: echo request seq 2
14:47:27.986781 IP 192.168.20.141 > 192.168.20.110: icmp 64: echo reply seq 2

14:47:28.986896 IP 192.168.20.110 > 192.168.20.141: icmp 64: echo request seq 3
14:47:28.986780 IP 192.168.20.141 > 192.168.20.110: icmp 64: echo reply seq 3

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoPhonet: fix mutex imbalance
Rémi Denis-Courmont [Wed, 30 Sep 2009 23:41:34 +0000]
Phonet: fix mutex imbalance

From: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>

port_mutex was unlocked twice.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosit: fix off-by-one in ipip6_tunnel_get_prl
Sascha Hlusiak [Tue, 29 Sep 2009 11:27:05 +0000]
sit: fix off-by-one in ipip6_tunnel_get_prl

When requesting all prl entries (kprl.addr == INADDR_ANY) and there are
more prl entries than there is space passed from userspace, the existing
code would always copy cmax+1 entries, which is more than can be handled.

This patch makes the kernel copy only exactly cmax entries.

Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de>
Acked-By: Fred L. Templin <Fred.L.Templin@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: Fix sock_wfree() race
Eric Dumazet [Thu, 24 Sep 2009 10:49:24 +0000]
net: Fix sock_wfree() race

Commit 2b85a34e911bf483c27cfdd124aeb1605145dc80
(net: No more expensive sock_hold()/sock_put() on each tx)
opens a window in sock_wfree() where another cpu
might free the socket we are working on.

A fix is to call sk->sk_write_space(sk) while still
holding a reference on sk.

Reported-by: Jike Song <albcamus@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: Make setsockopt() optlen be unsigned.
David S. Miller [Wed, 30 Sep 2009 23:12:20 +0000]
net: Make setsockopt() optlen be unsigned.

This provides safety against negative optlen at the type
level instead of depending upon (sometimes non-trivial)
checks against this sprinkled all over the the place, in
each and every implementation.

Based upon work done by Arjan van de Ven and feedback
from Linus Torvalds.

Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 30 Sep 2009 22:10:40 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched_clock: Fix atomicity/continuity bug by using cmpxchg64()
  x86: Provide an alternative() based cmpxchg64()

11 years agosched_clock: Fix atomicity/continuity bug by using cmpxchg64()
Eric Dumazet [Wed, 30 Sep 2009 18:36:19 +0000]
sched_clock: Fix atomicity/continuity bug by using cmpxchg64()

Commit def0a9b2573 (sched_clock: Make it NMI safe) assumed
cmpxchg() of 64bit values was available on X86_32.

That is not so - and causes some subtle scheduler misbehavior due
to incorrect timestamps off to up by ~4 seconds.

Two symptoms are known right now:

 - interactivity problems seen by Arjan: up to 600 msecs
   latencies instead of the expected 20-40 msecs. These
   latencies are very visible on the desktop.

 - incorrect CPU stats: occasionally too high percentages in 'top',
   and crazy CPU usage stats.

Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090930170754.0886ff2e@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agox86: Provide an alternative() based cmpxchg64()
Arjan van de Ven [Wed, 30 Sep 2009 15:07:54 +0000]
x86: Provide an alternative() based cmpxchg64()

cmpxchg64() today generates, to quote Linus, "barf bag" code.

cmpxchg64() is about to get used in the scheduler to fix a bug there,
but it's a prerequisite that cmpxchg64() first be made non-sucking.

This patch turns cmpxchg64() into an efficient implementation that
uses the alternative() mechanism to just use the raw instruction on
all modern systems.

Note: the fallback is NOT smp safe, just like the current fallback
is not SMP safe. (Interested parties with i486 based SMP systems
are welcome to submit fix patches for that.)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
[ fixed asm constraint bug ]
Fixed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090930170754.0886ff2e@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 30 Sep 2009 20:46:56 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Avoid spurious make includecheck message
  MIPS: VPE: Get rid of BKL.
  MIPS: VPE: Fix build after the credential changes a while ago.
  MIPS: Excite: Get rid of BKL.
  MIPS: Sibyte: Get rid of BKL.
  MIPS: BCM63xx: Add PCMCIA & Cardbus support.
  MIPS: MSP71xx: request_irq() failure ignored in msp_pcibios_config_access()
  MIPS: Decrease size of au1xxx_dbdma_pm_regs[][]
  MIPS: SMP: Inline arch_send_call_function_{single_ipi,ipi_mask}
  MIPS: SMP: Fix build.
  MIPS: MIPSxx SC: Avoid destructive invalidation on partial L2 cachelines.
  MIPS: Sibyte: Fix compilation error.
  MIPS: BCM1480: Re-apply patch lost due to bad resolution of merge conflict.
  MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.
  MIPS: Loongson2: Fix typo "enalbe" -> "enable"
  MIPS: SMTC: Remove duplicate structure field initialization
  MIPS: Remove duplicated #include
  MIPS: BCM63xx: Remove duplicated #include

11 years agoMIPS: Avoid spurious make includecheck message
Ralf Baechle [Tue, 29 Sep 2009 08:14:17 +0000]
MIPS: Avoid spurious make includecheck message

arch/mips/include/asm/unaligned.h: linux/unaligned/generic.h is included more than once.

Entirely legitimate but just noise.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: VPE: Get rid of BKL.
Ralf Baechle [Mon, 28 Sep 2009 23:52:27 +0000]
MIPS: VPE: Get rid of BKL.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: VPE: Fix build after the credential changes a while ago.
Ralf Baechle [Mon, 28 Sep 2009 23:19:20 +0000]
MIPS: VPE: Fix build after the credential changes a while ago.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: Excite: Get rid of BKL.
Ralf Baechle [Mon, 28 Sep 2009 15:59:12 +0000]
MIPS: Excite: Get rid of BKL.

It's not obvious what good it was supposed to do here anyway.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: Sibyte: Get rid of BKL.
Ralf Baechle [Mon, 28 Sep 2009 15:57:54 +0000]
MIPS: Sibyte: Get rid of BKL.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: BCM63xx: Add PCMCIA & Cardbus support.
Maxime Bizon [Mon, 28 Sep 2009 12:49:43 +0000]
MIPS: BCM63xx: Add PCMCIA & Cardbus support.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: MSP71xx: request_irq() failure ignored in msp_pcibios_config_access()
Roel Kluin [Fri, 18 Sep 2009 19:50:11 +0000]
MIPS: MSP71xx: request_irq() failure ignored in msp_pcibios_config_access()

Produce an error if request_irq() fails.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: "Ithamar R. Adema" <ithamar.adema@team-embedded.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: Decrease size of au1xxx_dbdma_pm_regs[][]
Roel Kluin [Fri, 18 Sep 2009 19:50:10 +0000]
MIPS: Decrease size of au1xxx_dbdma_pm_regs[][]

There are 16 individual channels (NUM_DBDMA_CHANS) to save/restore plus the
global ddma block config (the +1).  The last register in a channel can be
skipped since it's read-only (at offset 0x18).

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: SMP: Inline arch_send_call_function_{single_ipi,ipi_mask}
Ralf Baechle [Fri, 25 Sep 2009 14:35:28 +0000]
MIPS: SMP: Inline arch_send_call_function_{single_ipi,ipi_mask}

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: SMP: Fix build.
Ralf Baechle [Fri, 25 Sep 2009 14:08:01 +0000]
MIPS: SMP: Fix build.

commit 48a048fed82a8e5fdd8618574f6d3de1a0d67a50
Author: Rusty Russell <rusty@rustcorp.com.au>
Date:   Thu Sep 24 09:34:44 2009 -0600

apparently only passed the "looks good" level of QA ;-)

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: MIPSxx SC: Avoid destructive invalidation on partial L2 cachelines.
Kevin Cernekee [Sat, 19 Sep 2009 02:12:45 +0000]
MIPS: MIPSxx SC: Avoid destructive invalidation on partial L2 cachelines.

This extends commit a8ca8b64e3fdfec17679cba0ca5ce6e3ffed092d to cover
MIPSxx-style board cache code.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: Sibyte: Fix compilation error.
Mark Mason [Wed, 23 Sep 2009 20:35:09 +0000]
MIPS: Sibyte: Fix compilation error.

Build error introduced by d4f587c67fc39e0030ddd718675e252e208da4d7.

Signed-off-by: Mark Mason <mmason@upwardaccess.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: BCM1480: Re-apply patch lost due to bad resolution of merge conflict.
Ralf Baechle [Wed, 23 Sep 2009 20:37:08 +0000]
MIPS: BCM1480: Re-apply patch lost due to bad resolution of merge conflict.

Patch 14275ccdb1e4b487cca745aba994699c426a31ee and
d5dedd4507d307eb3f35f21b6e16f336fdc0d82a are conflicting and the
conflict was resolved badly in merge
92241940be501f798cb21db344bbb3d1ec3c4f1c resulting in the BCM1480 changes
of 14275ccdb1e4b487cca745aba994699c426a31ee getting lost.  Sort out the
damage.

Reported and initial patch by Mark Mason <mmason@upwardaccess.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.
Maxime Bizon [Fri, 18 Sep 2009 11:04:58 +0000]
MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: Loongson2: Fix typo "enalbe" -> "enable"
Uwe Kleine-König [Mon, 21 Sep 2009 08:40:37 +0000]
MIPS: Loongson2: Fix typo "enalbe" -> "enable"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Yanhua <yanh@lemote.com>
Cc: Robert Richter <robert.richter@amd.com>
Acked-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: SMTC: Remove duplicate structure field initialization
Julia Lawall [Mon, 21 Sep 2009 15:08:55 +0000]
MIPS: SMTC: Remove duplicate structure field initialization

The definition of the irq_ipi structure has two initializations of the
flags field.  This combines them.

[Ralf: The issue was originally introduced by commit
be4894196d79455f420dd7bb78be7dc73bec115c (linux-mips.org) rsp.
033890b084adfa367c544864451d7730552ce8bf (kernel.org).  The original
intention of the code was to initialize .flags with both flags ored together.
The broken C code as actually implemented will be compiled by an equally
broken gcc to use only the last initialization, that is IRQF_PERCPU
which means this turned into an SMTC bug for 2.6.23 and newer.]

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier I, s, fld;
position p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@s@
identifier I, s, r.fld;
position r.p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@script:python@
p0 << r.p0;
fld << r.fld;
ps << s.p;
pr << r.p;
@@

if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column):
  cocci.print_main(fld,p0)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: Remove duplicated #include
Huang Weiyi [Fri, 18 Sep 2009 07:14:35 +0000]
MIPS: Remove duplicated #include

Remove duplicated #include in arch/mips/kernel/smp.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMIPS: BCM63xx: Remove duplicated #include
Huang Weiyi [Fri, 18 Sep 2009 07:14:19 +0000]
MIPS: BCM63xx: Remove duplicated #include

Remove duplicated #include in arch/mips/bcm63xx/boards/board_bcm963xx.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Wed, 30 Sep 2009 16:42:24 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix missing initialization of i_dir_start_lookup member
  nilfs2: fix missing zero-fill initialization of btree node cache

11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Wed, 30 Sep 2009 16:32:30 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fix time encoding with extra epoch bits
  ext4: Add a stub for mpage_da_data in the trace header
  jbd2: Use tracepoints for history file
  ext4: Use tracepoints for mb_history trace file
  ext4, jbd2: Drop unneeded printks at mount and unmount time
  ext4: Handle nested ext4_journal_start/stop calls without a journal
  ext4: Make sure ext4_dirty_inode() updates the inode in no journal mode
  ext4: Avoid updating the inode table bh twice in no journal mode
  ext4: EXT4_IOC_MOVE_EXT: Check for different original and donor inodes first
  ext4: async direct IO for holes and fallocate support
  ext4: Use end_io callback to avoid direct I/O fallback to buffered I/O
  ext4: Split uninitialized extents for direct I/O
  ext4: release reserved quota when block reservation for delalloc retry
  ext4: Adjust ext4_da_writepages() to write out larger contiguous chunks
  ext4: Fix hueristic which avoids group preallocation for closed files
  ext4: Use ext4_msg() for ext4_da_writepage() errors
  ext4: Update documentation about quota mount options

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6
Linus Torvalds [Wed, 30 Sep 2009 16:31:14 +0000]
Merge git://git./linux/kernel/git/hirofumi/fatfs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: Check s_dirt in fat_sync_fs()
  vfat: change the default from shortname=lower to shortname=mixed
  fat/nls: Fix handling of utf8 invalid char

11 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspe...
Linus Torvalds [Wed, 30 Sep 2009 15:11:24 +0000]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / yenta: Fix cardbus suspend/resume regression
  PM / PCMCIA: Drop second argument of pcmcia_socket_dev_suspend()

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 30 Sep 2009 15:07:12 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  sony-laptop: re-read the rfkill state when resuming from suspend
  sony-laptop: check for rfkill hard block at load time
  wext: add back wireless/ dir in sysfs for cfg80211 interfaces
  wext: Add bound checks for copy_from_user
  mac80211: improve/fix mlme messages
  cfg80211: always get BSS
  iwlwifi: fix 3945 ucode info retrieval after failure
  iwlwifi: fix memory leak in command queue handling
  iwlwifi: fix debugfs buffer handling
  cfg80211: don't set privacy w/o key
  cfg80211: wext: don't display BSSID unless associated
  net: Add explicit bound checks in net/socket.c
  bridge: Fix double-free in br_add_if.
  isdn: fix netjet/isdnhdlc build errors
  atm: dereference of he_dev->rbps_virt in he_init_group()
  ax25: Add missing dev_put in ax25_setsockopt
  Revert "sit: stateless autoconf for isatap"
  net: fix double skb free in dcbnl
  net: fix nlmsg len size for skb when error bit is set.
  net: fix vlan_get_size to include vlan_flags size
  ...

11 years agoMerge branch 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Wed, 30 Sep 2009 15:03:00 +0000]
Merge branch 'drm-next' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (25 commits)
  drm/radeon/kms: Convert R520 to new init path and associated cleanup
  drm/radeon/kms: Convert RV515 to new init path and associated cleanup
  drm: fix radeon DRM warnings when !CONFIG_DEBUG_FS
  drm: fix drm_fb_helper warning when !CONFIG_MAGIC_SYSRQ
  drm/r600: fix memory leak introduced with 64k malloc avoidance fix.
  drm/kms: make fb helper work for all drivers.
  drm/radeon/r600: fix offset handling in CS parser
  drm/radeon/kms/r600: fix forcing pci mode on agp cards
  drm/radeon/kms: fix for the extra pages copying.
  drm/radeon/kms/r600: add support for vline relocs
  drm/radeon/kms: fix some bugs in vline reloc
  drm/radeon/kms/r600: clamp vram to aperture size
  drm/kms: protect against fb helper not being created.
  drm/r600: get values from the passed in IB not the copy.
  drm: create gitignore file for radeon
  drm/radeon/kms: remove unneeded master create/destroy functions.
  drm/kms: start adding command line interface using fb.
  fb: change rules for global rules match.
  drm/radeon/kms: don't require up to 64k allocations. (v2)
  drm/radeon/kms: enable dac load detection by default.
  ...

Trivial conflicts in drivers/gpu/drm/radeon/radeon_asic.h due to adding
'->vga_set_state' function pointers.

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Linus Torvalds [Wed, 30 Sep 2009 14:58:46 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tj/percpu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: make allocation failures more verbose
  percpu: make pcpu_setup_first_chunk() failures more verbose
  percpu: make embedding first chunk allocator check vmalloc space size
  sparc64: implement page mapping percpu first chunk allocator
  percpu: make pcpu_build_alloc_info() clear static buffers
  percpu: fix unit_map[] verification in pcpu_setup_first_chunk()

11 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 30 Sep 2009 14:58:25 +0000]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: Fix wrong condition check in while loop for mailbox and iommu2
  omap: rng: Use resource_size instead of manual calculation
  omap: Fix MMC gpio_wp for BeagleBoard C2 and above
  omap: Fix matrix_keymap_data usage
  omap: Fix a OMAP_MPUIO_VBASE typo for 850
  omap: Fix wrong jtag_id for 850
  omap: iovmm: Fix compiler warning
  omap: mailbox: Flush posted write when acking mailbox irq
  omap: mailbox: Execute softreset at startup
  omap: Add missing mux pin for EHCI phy reset line
  omap: Fix 44xx compile
  omap: Fix mcspi compile for 2420
  omap: Fix compile for arch/arm/mach-omap2

11 years agopty: reconnect the BSD TIOCSPTLCK handling to legacy ptys
Linus Torvalds [Wed, 30 Sep 2009 14:49:40 +0000]
pty: reconnect the BSD TIOCSPTLCK handling to legacy ptys

David Howells noticed (due to the compiler warning about an unused
'pty_ops_bsd' variable) that we haven't actually been using the code
that implements TIOCSPTLCK for legacy pty handling.  It's been that way
since 2.6.26, commit 3e8e88ca053150efdbecb45d8f481cf560ec808d to be
exact ("pty: prepare for tty->ops changes").

DavidH initially submitted a patch just removing the dead code entirely,
and since nobody has apparently ever complained, I'm not entirely sure
that wouldn't be the right thing to do.  But since the whole and only
point of the legacy pty code is to be compatible with legacy distros
that don't use the new unix98 pty model, let's just wire it up again.

And clean it up a bit while we're at it.

Acked-by: David Howells <dhowells@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoRevert "x86, mce: do not compile mcelog message on AMD"
Linus Torvalds [Wed, 30 Sep 2009 14:48:37 +0000]
Revert "x86, mce: do not compile mcelog message on AMD"

This reverts commit 22223c9b417be5fd0ab2cf9ad17eb7bd1e19f7b9, as
requested by Andi Kleen:

  "Obviously kernels compiled with AMD support can still run on non AMD
   systems, so messages like this can never be removed at compile time."

Requsted-by: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoext4: Fix time encoding with extra epoch bits
Theodore Ts'o [Wed, 30 Sep 2009 05:13:55 +0000]
ext4: Fix time encoding with extra epoch bits

"Looking at ext4.h, I think the setting of extra time fields forgets to
mask the epoch bits so the epoch part overwrites nsec part. The second
change is only for coherency (2 -> EXT4_EPOCH_BITS)."

Thanks to Damien Guibouret for pointing out this problem.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

11 years agoext4: Add a stub for mpage_da_data in the trace header
Josh Stone [Wed, 30 Sep 2009 04:51:22 +0000]
ext4: Add a stub for mpage_da_data in the trace header

The tracepoint ext4_da_write_pages has a struct mpage_da_data*
parameter, but that struct is only defined in fs/ext4/ext4.h.  This
patch adds a forward declaration for that struct, so this tracepoint
header can still be used by tools like SystemTap.

This is a continuation of the fix in commit 3661d286.

http://sourceware.org/bugzilla/show_bug.cgi?id=10703

Signed-off-by: Josh Stone <jistone@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

11 years agojbd2: Use tracepoints for history file
Theodore Ts'o [Wed, 30 Sep 2009 04:32:06 +0000]
jbd2: Use tracepoints for history file

The /proc/fs/jbd2/<dev>/history was maintained manually; by using
tracepoints, we can get all of the existing functionality of the /proc
file plus extra capabilities thanks to the ftrace infrastructure.  We
save memory as a bonus.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

11 years agoext4: Use tracepoints for mb_history trace file
Theodore Ts'o [Wed, 30 Sep 2009 04:32:42 +0000]
ext4: Use tracepoints for mb_history trace file

The /proc/fs/ext4/<dev>/mb_history was maintained manually, and had a
number of problems: it required a largish amount of memory to be
allocated for each ext4 filesystem, and the s_mb_history_lock
introduced a CPU contention problem.

By ripping out the mb_history code and replacing it with ftrace
tracepoints, and we get more functionality: timestamps, event
filtering, the ability to correlate mballoc history with other ext4
tracepoints, etc.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

11 years agoBtrfs: fix deadlock with free space handling and user transactions
Sage Weil [Tue, 29 Sep 2009 22:38:44 +0000]
Btrfs: fix deadlock with free space handling and user transactions

If an ioctl-initiated transaction is open, we can't force a commit during
the free space checks in order to free up pinned extents or else we
deadlock.  Just ENOSPC instead.

A more satisfying solution that reserves space for the entire user
transaction up front is forthcoming...

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: fix error cases for ioctl transactions
Sage Weil [Tue, 29 Sep 2009 22:38:44 +0000]
Btrfs: fix error cases for ioctl transactions

Fix leak of vfsmount write reference and open_ioctl_trans reference on
ENOMEM.  Clean up the error paths while we're at it.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoext4, jbd2: Drop unneeded printks at mount and unmount time
Theodore Ts'o [Tue, 29 Sep 2009 19:51:30 +0000]
ext4, jbd2: Drop unneeded printks at mount and unmount time

There are a number of kernel printk's which are printed when an ext4
filesystem is mounted and unmounted.  Disable them to economize space
in the system logs.  In addition, disabling the mballoc stats by
default saves a number of unneeded atomic operations for every block
allocation or deallocation.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

11 years agoBtrfs: Use CONFIG_BTRFS_POSIX_ACL to enable ACL code
Chris Ball [Tue, 29 Sep 2009 17:51:05 +0000]
Btrfs: Use CONFIG_BTRFS_POSIX_ACL to enable ACL code

We've already defined CONFIG_BTRFS_POSIX_ACL in Kconfig, but we're
currently not using it and are testing CONFIG_FS_POSIX_ACL instead.
CONFIG_FS_POSIX_ACL states "Never use this symbol for ifdefs".

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoBtrfs: introduce missing kfree
Julia Lawall [Tue, 29 Sep 2009 17:51:04 +0000]
Btrfs: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>