15 years agoMerge git://git.infradead.org/~dwmw2/rbtree-2.6
Linus Torvalds [Tue, 20 Jun 2006 21:51:22 +0000]
Merge git://git.infradead.org/~dwmw2/rbtree-2.6

* git://git.infradead.org/~dwmw2/rbtree-2.6:
  [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency
  Update UML kernel/physmem.c to use rb_parent() accessor macro
  [RBTREE] Update hrtimers to use rb_parent() accessor macro.
  [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.
  [RBTREE] Merge colour and parent fields of struct rb_node.
  [RBTREE] Remove dead code in rb_erase()
  [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
  [RBTREE] Update eventpoll.c to use rb_parent() accessor macro.
  [RBTREE] Update key.c to use rb_parent() accessor macro.
  [RBTREE] Update ext3 to use rb_parent() accessor macro.
  [RBTREE] Change rbtree off-tree marking in I/O schedulers.
  [RBTREE] Add accessor macros for colour and parent fields of rb_node

15 years agoMerge git://git.infradead.org/mtd-2.6
Linus Torvalds [Tue, 20 Jun 2006 21:50:31 +0000]
Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (199 commits)
  [MTD] NAND: Fix breakage all over the place
  [PATCH] NAND: fix remaining OOB length calculation
  [MTD] NAND Fixup NDFC merge brokeness
  [MTD NAND] S3C2410 driver cleanup
  [MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.
  [JFFS2] Check CRC32 on dirent and data nodes each time they're read
  [JFFS2] When retiring nextblock, allocate a node_ref for the wasted space
  [JFFS2] Mark XATTR support as experimental, for now
  [JFFS2] Don't trust node headers before the CRC is checked.
  [MTD] Restore MTD_ROM and MTD_RAM types
  [MTD] assume mtd->writesize is 1 for NOR flashes
  [MTD NAND] Fix s3c2410 NAND driver so it at least _looks_ like it compiles
  [MTD] Prepare physmap for 64-bit-resources
  [JFFS2] Fix more breakage caused by janitorial meddling.
  [JFFS2] Remove stray __exit from jffs2_compressors_exit()
  [MTD] Allow alternate JFFS2 mount variant for root filesystem.
  [MTD] Disconnect struct mtd_info from ABI
  [MTD] replace MTD_RAM with MTD_GENERIC_TYPE
  [MTD] replace MTD_ROM with MTD_GENERIC_TYPE
  [MTD] remove a forgotten MTD_XIP
  ...

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Tue, 20 Jun 2006 21:49:45 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] PARPORT_SERIAL should depend on SERIAL_8250_PCI

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Tue, 20 Jun 2006 21:49:29 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Add (MMC) to entry in MAINTAINERS file
  [MMC] sdhci truncated pointer fix

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 20 Jun 2006 21:49:00 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  [ARM] 3559/1: S3C2442: core and serial port
  [ARM] 3557/1: S3C24XX: centralise and cleanup uart registration
  [ARM] 3558/1: SMDK24XX: LED platform devices
  [ARM] 3534/1: add spi support to lubbock platform
  [ARM] 3554/1: ARM: Fix dyntick locking
  [ARM] 3553/1: S3C24XX: earlier print of cpu idcode info
  [ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug
  [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH
  [ARM] 3550/1: OSIRIS: fix serial port map for 1:1
  [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S
  [ARM] 3335/1: Old-abi Thumb sys_syscall broken
  [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig
  [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support
  [ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers
  [ARM] 3407/1: lpd7x: documetation update
  [ARM] 3406/1: lpd7x: compilation fix for smc91x
  [ARM] 3405/1: lpd7a40x: CPLD ssp driver
  [ARM] 3404/1: lpd7a40x: AMBA CLCD support
  [ARM] 3403/1: lpd7a40x: updated default configurations
  [ARM] 3402/1: lpd7a40x: serial driver bug fix
  ...

15 years ago[MTD] NAND: Fix breakage all over the place
Thomas Gleixner [Tue, 20 Jun 2006 18:05:05 +0000]
[MTD] NAND: Fix breakage all over the place

Following problems are addressed:

- wrong status caused early break out of nand_wait()
- removed the bogus status check in nand_wait() which
  is a relict of the abandoned support for interrupted
  erase.
- status check moved to the correct place in read_oob
- oob support for syndrom based ecc with strange layouts
- use given offset in the AUTOOOB based oob operations

Partially based on a patch from Vitaly Vool <vwool@ru.mvista.com>
Thanks to Savin Zlobec <savin@epico.si> for tracking down the
status problem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[PATCH] NAND: fix remaining OOB length calculation
Vitaly Wool [Wed, 7 Jun 2006 05:34:37 +0000]
[PATCH] NAND: fix remaining OOB length calculation

In nand_read_page_syndrome/nand_write_page_syndrome the calculation of
the remaining oob length which is not used by the prepad/ecc/postpad
areas is wrong.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years ago[MTD] NAND Fixup NDFC merge brokeness
Thomas Gleixner [Fri, 16 Jun 2006 16:10:09 +0000]
[MTD] NAND Fixup NDFC merge brokeness

Remove the remains of a broken merge.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

15 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 20 Jun 2006 02:07:12 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (51 commits)
  [MIPS] Make timer interrupt frequency configurable from kconfig.
  [MIPS] Correct HAL2 Kconfig description
  [MIPS] Fix R4K cache macro names
  [MIPS] Add Missing R4K Cache Macros to IP27 & IP32
  [MIPS] Support for the RM9000-based Basler eXcite smart camera platform.
  [MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board
  [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.
  [MIPS] SN: include asm/sn/types.h for nasid_t.
  [MIPS] Random fixes for sb1250
  [MIPS] Fix bcm1480 compile
  [MIPS] Remove support for NEC DDB5476.
  [MIPS] Remove support for NEC DDB5074.
  [MIPS] Cleanup memory managment initialization.
  [MIPS] SN: Declare bridge_pci_ops.
  [MIPS] Remove unused function alloc_pci_controller.
  [MIPS] IP27: Extract pci_ops into separate file.
  [MIPS] IP27: Use symbolic constants instead of magic numbers.
  [MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig.
  [MIPS] IP27: Cleanup N/M mode configuration.
  [MIPS] IP27: Throw away old unused hacks.
  ...

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Tue, 20 Jun 2006 02:01:59 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (46 commits)
  IB/uverbs: Don't serialize with ib_uverbs_idr_mutex
  IB/mthca: Make all device methods truly reentrant
  IB/mthca: Fix memory leak on modify_qp error paths
  IB/uverbs: Factor out common idr code
  IB/uverbs: Don't decrement usecnt on error paths
  IB/uverbs: Release lock on error path
  IB/cm: Use address handle helpers
  IB/sa: Add ib_init_ah_from_path()
  IB: Add ib_init_ah_from_wc()
  IB/ucm: Get rid of duplicate P_Key parameter
  IB/srp: Factor out common request reset code
  IB/srp: Support SRP rev. 10 targets
  [SCSI] srp.h: Add I/O Class values
  IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool.
  IB/mthca: Fill in max_map_per_fmr device attribute
  IB/ipath: Add client reregister event generation
  IB/mthca: Add client reregister event generation
  IB: Move struct port_info from ipath to <rdma/ib_smi.h>
  IPoIB: Handle client reregister events
  IB: Add client reregister event type
  ...

15 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 20 Jun 2006 01:55:56 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits)
  [ETHTOOL]: Fix UFO typo
  [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer.
  [SCTP]: Send only 1 window update SACK per message.
  [SCTP]: Don't do CRC32C checksum over loopback.
  [SCTP] Reset rtt_in_progress for the chunk when processing its sack.
  [SCTP]: Reject sctp packets with broadcast addresses.
  [SCTP]: Limit association max_retrans setting in setsockopt.
  [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate.
  [IPV6]: Sum real space for RTAs.
  [IRDA]: Use put_unaligned() in irlmp_do_discovery().
  [BRIDGE]: Add support for NETIF_F_HW_CSUM devices
  [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM
  [TG3]: Convert to non-LLTX
  [TG3]: Remove unnecessary tx_lock
  [TCP]: Add tcp_slow_start_after_idle sysctl.
  [BNX2]: Update version and reldate
  [BNX2]: Use CPU native page size
  [BNX2]: Use compressed firmware
  [BNX2]: Add firmware decompression
  [BNX2]: Allow WoL settings on new 5708 chips
  ...

Manual fixup for conflict in drivers/net/tulip/winbond-840.c

15 years agoMerge branch 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelf...
Linus Torvalds [Tue, 20 Jun 2006 01:53:20 +0000]
Merge branch 'i915fb' of git://git./linux/kernel/git/airlied/intelfb-2.6

* 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6: (25 commits)
  intelfb: fixup clock calculation debugging.
  Removed hard coded EDID buffer size.
  intelfb: use regular modedb table instead of VESA
  intelfb: use firmware EDID for mode database
  Revert "intelfb driver -- use the regular modedb table instead of the VESA"
  intelfb: int option fix
  sync modesetting code with X.org
  intelfb: align with changes from my X driver.
  intelfb driver -- use the regular modedb table instead of the VESA
  Adds support for 256MB aperture on 945 chipsets to the intelfb driver
  intelfb -- uses stride alignment of 64 on the 9xx chipsets.
  intelfb: some cleanups for intelfbhw
  intelfb: fixup pitch calculation like X does
  intelfb: fixup p calculation
  This patch makes a needlessly global struct static.
  intelfb: add i945GM support
  intelfb: fixup whitespace..
  intelfb: add hw cursor support for i9xx
  intelfb: make i915 modeset
  intelfb: add support for i945G
  ...

15 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
Linus Torvalds [Tue, 20 Jun 2006 01:51:41 +0000]
Merge /pub/scm/linux/kernel/git/davej/agpgart

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] alpha-agp warning fix
  [AGPGART] uninorth-agp warning fixes
  [AGPGART] Remove pointless initialisation in intel-agp
  [AGPGART] Remove pointless code from agp_generic_create_gatt_table()

15 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Tue, 20 Jun 2006 01:51:21 +0000]
Merge /pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] sets nforce2 minimum PLL divider to 2.
  [CPUFREQ] Make powernow-k7 work on SMP kernels.
  [CPUFREQ] cpufreq core {d,}printk adjustments
  [CPUFREQ] dprintk adjustments to cpufreq-speedstep-centrino
  [CPUFREQ] dprintk adjustments to cpufreq-nforce2
  [CPUFREQ] Prepare powernow-k8 for future CPUs.
  [CPUFREQ] Make acpi-cpufreq 'sticky'.
  [CPUFREQ] Remove strange No-op from longrun.c
  [CPUFREQ] Remove more freq_table reinitialisations.
  [CPUFREQ] Fix another redundant initialisation in freq_table
  [CPUFREQ] Remove duplicate assignment in freq_table
  [CPUFREQ] CodingStyle nits in cpufreq_stats.c
  [CPUFREQ] Remove duplicate assignment from cpufreq-nforce2
  [CPUFREQ] Remove pointless reinitialisations in acpi-cpufreq
  [CPUFREQ] Remove pointless reinitialisation from powernow-k8
  [CPUFREQ] Remove redundant initialisation from longhaul.
  [CPUFREQ] Clean up longhaul's speed pretty-printer
  [CPUFREQ] Disambiguate loop indexes in powernow-k7
  [CPUFREQ] Typo in powernow-k8

15 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 20 Jun 2006 01:50:43 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (166 commits)
  [PATCH] net: au1000_eth: PHY framework conversion
  [PATCH] 3c5zz ethernet: fix section warnings
  [PATCH] smc ethernet: fix section mismatch warnings
  [PATCH] hp ethernet: fix section mismatches
  [PATCH] Section mismatch in drivers/net/ne.o during modpost
  [PATCH] e1000: prevent statistics from getting garbled during reset
  [PATCH] smc911x Kconfig fix
  [PATCH] forcedeth: new device ids
  [PATCH] forcedeth config: version
  [PATCH] forcedeth config: module parameters
  [PATCH] forcedeth config: diagnostics
  [PATCH] forcedeth config: move functions
  [PATCH] forcedeth config: statistics
  [PATCH] forcedeth config: csum
  [PATCH] forcedeth config: wol
  [PATCH] forcedeth config: phy
  [PATCH] forcedeth config: flow control
  [PATCH] forcedeth config: ring sizes
  [PATCH] forcedeth config: tso cleanup
  [DOC] Update bonding documentation with sysfs info
  ...

15 years agoAdd support for suspending and resuming the whole console subsystem
Linus Torvalds [Tue, 20 Jun 2006 01:16:01 +0000]
Add support for suspending and resuming the whole console subsystem

Trying to suspend/resume with console messages flying all around is
doomed to failure, when the devices that the messages are trying to
go to are being shut down.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoMake sure to re-enable SCI after an ACPI suspend
Linus Torvalds [Tue, 20 Jun 2006 01:05:09 +0000]
Make sure to re-enable SCI after an ACPI suspend

According to the ACPI spec, it should be enabled on return from suspend,
but bugs happen.  Apparently especially on the Apple Intel Macs.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years agoImprove SATA core suspend/resume
Linus Torvalds [Tue, 20 Jun 2006 01:01:27 +0000]
Improve SATA core suspend/resume

Doing a full ata_busy_sleep() seems to get suspend and resume working
fine on the Apple Mac Mini, at least.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[MIPS] Make timer interrupt frequency configurable from kconfig.
Atsushi Nemoto [Mon, 19 Jun 2006 15:19:13 +0000]
[MIPS] Make timer interrupt frequency configurable from kconfig.

Make HZ configurable.  DECSTATION can select 128/256/1024 HZ, JAZZ can
only select 100 HZ, others can select 100/128/250/256/1000/1024 HZ if
not explicitly specified).  Also remove all mach-xxx/param.h files and
update all defconfigs according to current HZ value.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Correct HAL2 Kconfig description
Kumba [Sun, 18 Jun 2006 06:17:08 +0000]
[MIPS] Correct HAL2 Kconfig description

The current HAL2 Kconfig description indicates it is only used on SGI
Indy systems, however all members of the Indigo2 Family have this sound
card as well.  Plus a minor grammatical fix is included.

Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Fix R4K cache macro names
Kumba [Sun, 18 Jun 2006 06:17:01 +0000]
[MIPS] Fix R4K cache macro names

Several machines have the R4K cache macro name spelled incorrectly.  Namely,
they have cpu_has_4kcache defined instead of cpu_has_4k_cache.

Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Add Missing R4K Cache Macros to IP27 & IP32
Kumba [Sun, 18 Jun 2006 06:16:53 +0000]
[MIPS] Add Missing R4K Cache Macros to IP27 & IP32

Keeping in accordance with other machines, IP27 and IP32 lack a few
macros.  IP27 lacks cpu_has_4kex & cpu_has_4k_cache macros while IP32
lacks just the cpu_has_4k_cache macro.

Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Support for the RM9000-based Basler eXcite smart camera platform.
Ralf Baechle [Sun, 18 Jun 2006 15:39:46 +0000]
[MIPS] Support for the RM9000-based Basler eXcite smart camera platform.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board
dmitry pervushin [Sun, 21 May 2006 10:53:06 +0000]
[MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board

Signed-off-by: dmitry pervushin <dpervushin@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.
Thomas Bogendoerfer [Tue, 13 Jun 2006 11:59:01 +0000]
[MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.

Added support for RM200C machines with big endian firmware
Added support for RM200-C40 (R5000 support)

Signed-off-by: Florian Lohoff <flo@rfc822.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] SN: include asm/sn/types.h for nasid_t.
Ralf Baechle [Sat, 17 Jun 2006 09:56:26 +0000]
[MIPS] SN: include asm/sn/types.h for nasid_t.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Random fixes for sb1250
Thiemo Seufer [Sun, 18 Jun 2006 04:23:47 +0000]
[MIPS] Random fixes for sb1250

Random improvements for sb1250: Silence compiler warnings, a bugfix for
the profiling code, and a comment typo.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Fix bcm1480 compile
Thiemo Seufer [Sun, 18 Jun 2006 04:17:54 +0000]
[MIPS] Fix bcm1480 compile

Fix compilation for bcm1480, a hpt is only available on sb1250/bcm112x.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Remove support for NEC DDB5476.
Ralf Baechle [Sun, 18 Jun 2006 04:28:38 +0000]
[MIPS] Remove support for NEC DDB5476.

As warned several times before.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Remove support for NEC DDB5074.
Ralf Baechle [Sun, 18 Jun 2006 03:58:57 +0000]
[MIPS] Remove support for NEC DDB5074.

As warned several times before.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Cleanup memory managment initialization.
Ralf Baechle [Sun, 18 Jun 2006 00:32:22 +0000]
[MIPS] Cleanup memory managment initialization.

Historically plat_mem_setup did the entire platform initialization.  This
was rather impractical because it meant plat_mem_setup had to get away
without any kind of memory allocator.  To keep old code from breaking
plat_setup was just renamed to plat_setup and a second platform
initialization hook for anything else was introduced.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] SN: Declare bridge_pci_ops.
Ralf Baechle [Sat, 17 Jun 2006 13:55:40 +0000]
[MIPS] SN: Declare bridge_pci_ops.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Remove unused function alloc_pci_controller.
Ralf Baechle [Sat, 17 Jun 2006 13:54:32 +0000]
[MIPS] Remove unused function alloc_pci_controller.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Extract pci_ops into separate file.
Ralf Baechle [Fri, 16 Jun 2006 23:55:45 +0000]
[MIPS] IP27: Extract pci_ops into separate file.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Use symbolic constants instead of magic numbers.
Ralf Baechle [Fri, 16 Jun 2006 23:46:27 +0000]
[MIPS] IP27: Use symbolic constants instead of magic numbers.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig.
Yoichi Yuasa [Thu, 15 Jun 2006 14:29:37 +0000]
[MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig.

Remove unnecessary items from vr41xx/Kconfig.  SYS_HA_CPU_VR41XX has
already been selected by MACH_VR41XX.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Cleanup N/M mode configuration.
Ralf Baechle [Wed, 14 Jun 2006 07:10:35 +0000]
[MIPS] IP27: Cleanup N/M mode configuration.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Throw away old unused hacks.
Ralf Baechle [Wed, 14 Jun 2006 07:01:30 +0000]
[MIPS] IP27: Throw away old unused hacks.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Drop 0 definition for kern_addr_valid
Ralf Baechle [Mon, 12 Jun 2006 11:20:09 +0000]
[MIPS] Drop 0 definition for kern_addr_valid

kern_addr_valid is currently only being used in kmem_ptr_validate which
is making some vague attempt at verfying the validity of an address.
Only IA-64, PARISC and x86-64 actually make some actual effort to verify
the validity of the pointer.  Most architecture definitions of
kern_addr_valid() just define it as 1; the Alpha and CONFIG_DISCONTIGMEM
on i386 and MIPS even as 0; the 0-definition will result in
kmem_ptr_validate always failing which in turn will cause d_validate to
always fail.  d_validate's only two users are smbfs and ncpfs, so the
0 definition ended breaking those ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Consolidate definitions of pfn_valid in one file.
Ralf Baechle [Mon, 12 Jun 2006 08:13:56 +0000]
[MIPS] Consolidate definitions of pfn_valid in one file.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] APM emu support
Rodolfo Giometti [Mon, 5 Jun 2006 15:43:10 +0000]
[MIPS] APM emu support

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] SN: Rename SGI_SN0_N_MODE -> SGI_SN_N_MODE.
Ralf Baechle [Sun, 11 Jun 2006 23:55:14 +0000]
[MIPS] SN: Rename SGI_SN0_N_MODE -> SGI_SN_N_MODE.

It's not SN0-specific.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] SN: Move FRU header one level up; it is not SN0-specific.
Ralf Baechle [Fri, 9 Jun 2006 23:37:20 +0000]
[MIPS] SN: Move FRU header one level up; it is not SN0-specific.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Cleanup ARCH_DISCONTIGMEM_ENABLE and NUMA configuration.
Ralf Baechle [Sun, 11 Jun 2006 22:03:08 +0000]
[MIPS] Cleanup ARCH_DISCONTIGMEM_ENABLE and NUMA configuration.

IP27 configuration isn't the only NUMA system - it just happens to be
the currently only supported MIPS NUMA system.  So move the necessary
options back into the main MIPS Kconfig file.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Remove #if 0'ed code.
Ralf Baechle [Wed, 7 Jun 2006 19:13:20 +0000]
[MIPS] IP27: Remove #if 0'ed code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Nuke leftovers of _STANDALONE
Ralf Baechle [Wed, 7 Jun 2006 19:10:06 +0000]
[MIPS] IP27: Nuke leftovers of _STANDALONE

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Remove leftovers of sable support.
Ralf Baechle [Wed, 7 Jun 2006 19:07:29 +0000]
[MIPS] IP27: Remove leftovers of sable support.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Nuke last leftovers from FRUTEST
Ralf Baechle [Wed, 7 Jun 2006 19:04:23 +0000]
[MIPS] IP27: Nuke last leftovers from FRUTEST

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Nuke last leftovers of CONFIG_SGI_IO.
Ralf Baechle [Wed, 7 Jun 2006 19:02:21 +0000]
[MIPS] IP27: Nuke last leftovers of CONFIG_SGI_IO.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] C99-ify struct resource initialization.
Ralf Baechle [Sun, 4 Jun 2006 22:14:05 +0000]
[MIPS] C99-ify struct resource initialization.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Remove duplicate declarations from Alchemy code.
Ralf Baechle [Sat, 3 Jun 2006 23:55:21 +0000]
[MIPS] Remove duplicate declarations from Alchemy code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Cleanup __emt() a bit.
Ralf Baechle [Sat, 3 Jun 2006 20:59:51 +0000]
[MIPS] Cleanup __emt() a bit.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Remove unused definitions from addrspace.h.
Yoichi Yuasa [Wed, 31 May 2006 07:00:05 +0000]
[MIPS] Remove unused definitions from addrspace.h.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] arch/mips/au1000/time.c cleanup
Sergei Shtylyov [Sat, 27 May 2006 20:04:01 +0000]
[MIPS] arch/mips/au1000/time.c cleanup

Mark au1xxx_timer_setup() __init, just because it is. Get rid of
unneeded extern's (note that (*do_gettimeoffset)() is already declared by
<asm/time.c>) and an unused variable. Kill some whitespace...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Remove unused instances of prom_build_cpu_map.
Ralf Baechle [Thu, 18 May 2006 11:38:47 +0000]
[MIPS] Remove unused instances of prom_build_cpu_map.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Qemu system shutdown support
Thiemo Seufer [Mon, 15 May 2006 17:59:34 +0000]
[MIPS] Qemu system shutdown support

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Unify mips_fpu_soft_struct and mips_fpu_hard_structs.
Atsushi Nemoto [Mon, 15 May 2006 16:26:03 +0000]
[MIPS] Unify mips_fpu_soft_struct and mips_fpu_hard_structs.

The struct mips_fpu_soft_struct and mips_fpu_hard_struct are
completely same now and the kernel fpu emulator assumes that.  This
patch unifies them to mips_fpu_struct and get rid of mips_fpu_union.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Remove prototype for non-existing function.
Ralf Baechle [Mon, 15 May 2006 14:08:22 +0000]
[MIPS] Remove prototype for non-existing function.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Wind River 4KC PPMC Eval Board Support
Mark.Zhan [Sat, 6 May 2006 09:04:20 +0000]
[MIPS] Wind River 4KC PPMC Eval Board Support

Support for the GT-64120-based Wind River 4KC PPMC Evaluation board.

Signed-off-by: Rongkai.Zhan <Rongkai.zhan@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Au1xxx: board specific irq code cleanup
Herbert Valerio Riedel [Sun, 7 May 2006 13:48:25 +0000]
[MIPS] Au1xxx: board specific irq code cleanup

Convert sizeof/sizeof use to use of ARRAY_SIZE macro, and annotate
irqmap structures as __initdata.

Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP27: Fix collision with hardcoded interrupt number.
Ralf Baechle [Fri, 16 Jun 2006 15:10:49 +0000]
[MIPS] IP27: Fix collision with hardcoded interrupt number.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Fix futex_atomic_op_inuser.
Atsushi Nemoto [Sun, 11 Jun 2006 14:25:43 +0000]
[MIPS] Fix futex_atomic_op_inuser.

I found that NPTL's pthread_cond_signal() does not work properly on
kernels compiled by gcc 4.1.x.  I suppose inline asm for
__futex_atomic_op() was wrong.  I suppose:

1. "=&r" constraint should be used for oldval.
2. Instead of "r" (uaddr), "=R" (*uaddr) for output and "R" (*uaddr)
   for input should be used.
3. "memory" should be added to the clobber list.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[PATCH] Fix BCM1480 doubled process accounting times.
[MIPS] James E Wilson [Mon, 27 Feb 2006 23:04:38 +0000]
[PATCH] Fix BCM1480 doubled process accounting times.

Running a UP kernel on a bcm1480 board, I get nonsensical timing
results, like this:
release@unknown:~/tmp$ time ./a.out
real    0m22.906s
user    0m45.792s
sys     0m0.010s
According to my watch, this program took 23 seconds to run, so the real
time clock is OK.  It is process accounting that is broken.

I tracked this down to a problem with the function
bcm1480_timer_interrupt in the file sibyte/bcm1480/time.c.  This
function calls ll_timer_interrupt for cpu0, and ll_local_timer_interrupt
for all cpus.  However, both of these functions do process accounting.
Thus processes running on cpu0 end up with doubled times.  This is very
obvious in a UP kernel where all processes run on cpu0.

The correct way to do this is to only call ll_local_timer interrupt if
this is not cpu0.  This can be seen in the mips-board/generic/time.c
file, and also in the sibyte/sb1250/time.c file, both of which handle
this correctly.  I fixed the bcm1480/time.c file by copying over the
correct code from the sb1250/time.c file.

With this fix, I now get sensible results.
release@unknown:~/tmp$ time ./a.out
real    0m22.903s
user    0m22.894s
sys     0m0.006s

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Mark PNX8550 support broken.
Ralf Baechle [Wed, 7 Jun 2006 14:24:44 +0000]
[MIPS] Mark PNX8550 support broken.

Broken in too many way for me to fix it for 2.6.17.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Fix optimization for size build.
Ralf Baechle [Wed, 7 Jun 2006 12:25:37 +0000]
[MIPS] Fix optimization for size build.

It took a while longer than on other architectures but gcc has finally
started to strike us as well ...

This also fixes the damage by 6edfba1b33c701108717f4e036320fc39abe1912.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] IP22: Fix ISA driver builds if CONFIG_EISA is selected.
Ralf Baechle [Wed, 7 Jun 2006 11:53:17 +0000]
[MIPS] IP22: Fix ISA driver builds if CONFIG_EISA is selected.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Cobalt: Fix undefined reference to disable_early_printk.
Yoichi Yuasa [Wed, 7 Jun 2006 00:53:34 +0000]
[MIPS] Cobalt: Fix undefined reference to disable_early_printk.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Fix fpu_save_double on 64-bit.
Atsushi Nemoto [Mon, 22 May 2006 15:47:41 +0000]
[MIPS] Fix fpu_save_double on 64-bit.

> Without this fix, _save_fp() in 64-bit kernel is seriously broken.
>
ffffffff8010bec0 <_save_fp>:
ffffffff8010bec0:       400d6000        mfc0    t1,c0_status
ffffffff8010bec4:       000c7140        sll     t2,t0,0x5
ffffffff8010bec8:       05c10011        bgez    t2,ffffffff8010bf10 <_save_fp+0x50>
ffffffff8010becc:       00000000        nop
ffffffff8010bed0:       f4810328        sdc1    $f1,808(a0)
> ...

Fix register usage in fpu_save_double() and make fpu_restore_double()
more symmetric with fpu_save_double().

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MIPS] Malta: Handle byteswapping hardare bug in big endian mode.
Elizabeth Oldham [Tue, 6 Jun 2006 09:57:09 +0000]
[MIPS] Malta: Handle byteswapping hardare bug in big endian mode.

The SOC-it system controller running in big endian mode might forget
byteswapping when DMAing to the last word of physical memory.  Fixed by
ignoring the last page of memory.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

15 years ago[MTD NAND] S3C2410 driver cleanup
Ben Dooks [Mon, 19 Jun 2006 08:43:23 +0000]
[MTD NAND] S3C2410 driver cleanup

Fix unused variables and commenting since tglx's
new NAND updates

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

15 years ago[MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.
Ben Dooks [Mon, 19 Jun 2006 08:29:38 +0000]
[MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

15 years ago[ARM] 3559/1: S3C2442: core and serial port
Ben Dooks [Sun, 18 Jun 2006 22:06:41 +0000]
[ARM] 3559/1: S3C2442: core and serial port

Patch from Ben Dooks

Core support for the Samsung S3C2442, and the
serial port driver update to allow the serial
port blocks to be used.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3557/1: S3C24XX: centralise and cleanup uart registration
Ben Dooks [Sun, 18 Jun 2006 22:04:05 +0000]
[ARM] 3557/1: S3C24XX: centralise and cleanup uart registration

Patch from Ben Dooks

All the S3C24XX based devices currently have similar
uart blocks, in the same location. Make the process
of adding new uart blocks easier by commonising the
device definitions and adding a new init function
for the cpu code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3558/1: SMDK24XX: LED platform devices
Ben Dooks [Sun, 18 Jun 2006 21:56:37 +0000]
[ARM] 3558/1: SMDK24XX: LED platform devices

Patch from Ben Dooks

Platform devices for the LEDs on all the SMDK24XX boards

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[JFFS2] Check CRC32 on dirent and data nodes each time they're read
David Woodhouse [Sun, 18 Jun 2006 21:44:21 +0000]
[JFFS2] Check CRC32 on dirent and data nodes each time they're read

Also, make sure dirents are marked REF_UNCHECKED when we 'discover' them
through eraseblock summary.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

15 years ago[JFFS2] When retiring nextblock, allocate a node_ref for the wasted space
David Woodhouse [Sun, 18 Jun 2006 17:35:10 +0000]
[JFFS2] When retiring nextblock, allocate a node_ref for the wasted space

Failing to do so makes the calculated length of the last node incorrect,
when we're not using eraseblock summaries.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

15 years ago[ARM] 3534/1: add spi support to lubbock platform
David Brownell [Sun, 18 Jun 2006 15:39:33 +0000]
[ARM] 3534/1: add spi support to lubbock platform

Patch from David Brownell

This adds the platform device for SSP/SPI controller, and declares
the ads7846 device hooked up to it.  Not all Lubbock boards appear
to populate the connector needed to use this instead of the ucb1400
chip, but it can always be used as a temperature sensor.

In short, this is probably most useful as an example of how to
provide the configuration data used by the pxa2xx_spi driver.
(Last tested against a slightly earlier version of that driver.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3554/1: ARM: Fix dyntick locking
Tony Lindgren [Sun, 18 Jun 2006 15:26:58 +0000]
[ARM] 3554/1: ARM: Fix dyntick locking

Patch from Tony Lindgren

This patch fixes some dyntick locking issues on ARM as pointed
out by Russell King.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3553/1: S3C24XX: earlier print of cpu idcode info
Ben Dooks [Sun, 18 Jun 2006 15:21:53 +0000]
[ARM] 3553/1: S3C24XX: earlier print of cpu idcode info

Patch from Ben Dooks

Move the printk of the CPU information and IDCODE
before the checking of the table entry validity
to aide in debugging new cpu entries.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug
Ben Dooks [Sun, 18 Jun 2006 15:21:52 +0000]
[ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug

Patch from Ben Dooks

Using the low-level debug routines early in the
kernel debug cause the 1:1 mapping to get into
the TLB, which is not flushed until after the
CPU detection process (which needs the GPIO VA).

This patch moves the VA for the GPIO to the
same offset as the physical offset of the UART
to the GPIO.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH
Ben Dooks [Sun, 18 Jun 2006 15:21:51 +0000]
[ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH

Patch from Ben Dooks

If CONFIG_CPU_DCACHE_WRITETHOUGH is set, then the
S3C24XX PM code fails to compile, as there is no
need to flush the D-cache, the flush function
arm920_flush_kern_cache_all() is not compiled.

Fix the code to not use this if the config is set.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3550/1: OSIRIS: fix serial port map for 1:1
Ben Dooks [Sun, 18 Jun 2006 15:21:50 +0000]
[ARM] 3550/1: OSIRIS: fix serial port map for 1:1

Patch from Ben Dooks

The default serial port-mapping for the Osiris has
the port 2 mapped onto the first serial port, and
no port1. Correct this so port 1 is port.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S
Catalin Marinas [Sun, 18 Jun 2006 15:21:50 +0000]
[ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S

Patch from Catalin Marinas

This code was still using the old format for the ARMv6 CPU id and it wasn't
flushing the caches on the MPCore CPU (and other ARM1176 cores). The patch
changes the mask bits to cope with the new id format.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3335/1: Old-abi Thumb sys_syscall broken
Paul Brook [Tue, 16 May 2006 13:25:55 +0000]
[ARM] 3335/1: Old-abi Thumb sys_syscall broken

Patch from Paul Brook

The old-abi sys_syscall syscall is broken when called from Thumb mode. It
assumes the syscall number is an Arm syscall number (ie. starts from
__NR_OABI_SYSCALL_BASE).  In thumb mode syscall numbers start from zero.

The patch below fixes this by clearing the nigh bits of the syscall number
instead of inverting them. Technically this means we accept some invalid
syscall numbers, but I can't see how that could be a problem. The two sets of
numbers far apart that unimplemented syscalls should still be rejected.

Signed-off-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig
Vitaly Wool [Tue, 16 May 2006 10:54:38 +0000]
[ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig

Patch from Vitaly Wool

This patch adds default configuration file PNX4008 ARM platform.
It\'s basically the same as the previos one.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support
Vitaly Wool [Tue, 16 May 2006 10:54:37 +0000]
[ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support

Patch from Vitaly Wool

This patch adds basic chip support for PNX4008 ARM platform.
It's basically the same as the previous one, but with the rmk's
comments taken into account.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers
Vitaly Wool [Tue, 16 May 2006 10:54:36 +0000]
[ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers

Patch from Vitaly Wool

This patch adds kernel headers for PNX4008 ARM platform.
It's basically the same as the previos one, but with the rmk's comments taken into account.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3407/1: lpd7x: documetation update
Marc Singer [Tue, 16 May 2006 10:41:43 +0000]
[ARM] 3407/1: lpd7x: documetation update

Patch from Marc Singer

New documentation for the touchscreen controllers and LCD panels.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3406/1: lpd7x: compilation fix for smc91x
Marc Singer [Tue, 16 May 2006 10:41:40 +0000]
[ARM] 3406/1: lpd7x: compilation fix for smc91x

Patch from Marc Singer

Reworking of the adaptation macros to allow driver to compile again
for the lpd7x's.  Also, support added for the lh79520 so it may use
the smc91x.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3405/1: lpd7a40x: CPLD ssp driver
Marc Singer [Tue, 16 May 2006 10:41:32 +0000]
[ARM] 3405/1: lpd7a40x: CPLD ssp driver

Patch from Marc Singer

Driver for operating SSP devices through LPD7A40X CPLD chip.  This
driver is used by the audio codecs.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3404/1: lpd7a40x: AMBA CLCD support
Marc Singer [Tue, 16 May 2006 10:41:30 +0000]
[ARM] 3404/1: lpd7a40x: AMBA CLCD support

Patch from Marc Singer

Board support and LCD panel configurations to integrate lh7a40x's with
the amba clcd driver.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3403/1: lpd7a40x: updated default configurations
Marc Singer [Tue, 16 May 2006 10:41:29 +0000]
[ARM] 3403/1: lpd7a40x: updated default configurations

Patch from Marc Singer

Revised default configuration files.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3402/1: lpd7a40x: serial driver bug fix
Marc Singer [Tue, 16 May 2006 10:41:29 +0000]
[ARM] 3402/1: lpd7a40x: serial driver bug fix

Patch from Marc Singer

The serial driver now sets up the third UART when it is to be used.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3401/1: lpd7a40x: platform update
Marc Singer [Tue, 16 May 2006 10:41:28 +0000]
[ARM] 3401/1: lpd7a40x: platform update

Patch from Marc Singer

Updates to the lpd7a40x_platform files.  Includes support for new
architecture, lpd7a400.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[ARM] 3400/1: lpd7a40x: platform headers update
Marc Singer [Tue, 16 May 2006 10:41:27 +0000]
[ARM] 3400/1: lpd7a40x: platform headers update

Patch from Marc Singer

Updates to the lpd7a40x platform headers.  Includes support for new
architecture, lpd7a400.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[SERIAL] PARPORT_SERIAL should depend on SERIAL_8250_PCI
Russell King [Sun, 18 Jun 2006 12:00:48 +0000]
[SERIAL] PARPORT_SERIAL should depend on SERIAL_8250_PCI

Since parport_serial uses symbols from 8250_pci, there should
be a dependency between the configuration symbols for these
two modules.  Problem reported by Andrey Borzenkov

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[JFFS2] Mark XATTR support as experimental, for now
David Woodhouse [Sun, 18 Jun 2006 09:22:40 +0000]
[JFFS2] Mark XATTR support as experimental, for now

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

15 years agointelfb: fixup clock calculation debugging.
Dave Airlie [Sun, 18 Jun 2006 06:12:27 +0000]
intelfb: fixup clock calculation debugging.

The debugging code for pll clocks was wrong and causing div by 0.

Signed-off-by: Dave Airlie <airlied@linux.ie>

15 years ago[ETHTOOL]: Fix UFO typo
Herbert Xu [Sun, 18 Jun 2006 06:00:20 +0000]
[ETHTOOL]: Fix UFO typo

The function ethtool_get_ufo was referring to ETHTOOL_GTSO instead of
ETHTOOL_GUFO.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer.
Neil Horman [Sun, 18 Jun 2006 05:59:03 +0000]
[SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer.

In the event that our entire receive buffer is full with a series of
chunks that represent a single gap-ack, and then we accept a chunk
(or chunks) that fill in the gap between the ctsn and the first gap,
we renege chunks from the end of the buffer, which effectively does
nothing but move our gap to the end of our received tsn stream. This
does little but move our missing tsns down stream a little, and, if the
sender is sending sufficiently large retransmit frames, the result is a
perpetual slowdown which can never be recovered from, since the only
chunk that can be accepted to allow progress in the tsn stream necessitates
that a new gap be created to make room for it. This leads to a constant
need for retransmits, and subsequent receiver stalls. The fix I've come up
with is to deliver the frame without reneging if we have a full receive
buffer and the receiving sockets sk_receive_queue is empty(indicating that
the receive buffer is being blocked by a missing tsn).

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>