14 years ago[PATCH] Remove 'volatile' from spinlock_types
Art Haas [Wed, 6 Dec 2006 20:45:53 +0000]
[PATCH] Remove 'volatile' from spinlock_types

This is a resubmission of patches originally created by Ingo Molnar.
The link below is the initial (?) posting of the patch.

  http://marc.theaimsgroup.com/?l=linux-kernel&m=115217423929806&w=2

Remove 'volatile' from spinlock_types as it causes GCC to generate bad
code (see link) and locking should be used on kernel data.

Signed-off-by: Art Haas <ahaas@airmail.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] drivers/{char|isdn}: work_struct-induced breakage
Al Viro [Wed, 6 Dec 2006 18:41:45 +0000]
[PATCH] drivers/{char|isdn}: work_struct-induced breakage

part 1 of fsck-knows-how-many

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] hamradio/dmascc: fix up work_struct-induced breakage
Al Viro [Wed, 6 Dec 2006 18:51:40 +0000]
[PATCH] hamradio/dmascc: fix up work_struct-induced breakage

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Wed, 6 Dec 2006 16:10:55 +0000]
Merge /pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (43 commits)
  sh: sh775x/titan fixes for irq header changes.
  sh: update r7780rp defconfig.
  sh: compile fixes for header cleanup.
  sh: Fixup pte_mkhuge() build failure.
  sh: set KBUILD_IMAGE to something sensible.
  sh: show held locks in stack trace with lockdep.
  sh: platform_pata support for R7780RP
  sh: stacktrace/lockdep/irqflags tracing support.
  sh: Fixup movli.l/movco.l atomic ops for gcc4.
  sh: dyntick infrastructure.
  sh: Clock framework tidying.
  sh: Turn off IRQs around get_timer_offset() calls.
  sh: Get the PGD right in oops case with 64-bit PTEs.
  sh: Fix store queue bitmap end.
  sh: More flexible + SH7780 earlyprintk SCIF support.
  sh: Fixup various PAGE_SIZE == 4096 assumptions.
  sh: Fixup 4K irq stacks.
  sh: dma-api channel capability extensions.
  sh: Drop name overload in dma-sh.
  sh: Make dma-isa depend on ISA_DMA_API.
  ...

14 years agoMerge git://git.infradead.org/users/dhowells/workq-2.6
Linus Torvalds [Wed, 6 Dec 2006 16:01:37 +0000]
Merge git://git.infradead.org/users/dhowells/workq-2.6

* git://git.infradead.org/users/dhowells/workq-2.6:
  Actually update the fixed up compile failures.
  WorkQueue: Fix up arch-specific work items where possible
  WorkStruct: make allyesconfig
  WorkStruct: Pass the work_struct pointer instead of context data
  WorkStruct: Merge the pending bit into the wq_data pointer
  WorkStruct: Typedef the work function prototype
  WorkStruct: Separate delayable and non-delayable events.

14 years ago[PATCH] uclinux: fix mmap() of directory for nommu case
Mike Frysinger [Wed, 6 Dec 2006 02:02:59 +0000]
[PATCH] uclinux: fix mmap() of directory for nommu case

I was playing with blackfin when i hit a neat bug ... doing an open() on a
directory and then passing that fd to mmap() would cause the kernel to hang

after poking into the code a bit more, i found that
mm/nommu.c:validate_mmap_request() checks the length and if it is 0, just
returns the address ... this is in stark contrast to mmu's
mm/mmap.c:do_mmap_pgoff() where it returns -EINVAL for 0 length requests ...
i then noticed that some other parts of the logic is out of date between the
two funcs, so perhaps that's the easy fix ?

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m68knommu: remove FP conditionals in ucontext struct
Gavin Lambert [Wed, 6 Dec 2006 01:57:53 +0000]
[PATCH] m68knommu: remove FP conditionals in ucontext struct

The first patch is to the 2.6 kernel include file (for m68knommu), to get
rid of the conditional definitions, otherwise the structures have different
sizes depending on whether there's an FPU or not.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m68knommu: ColdFire serial driver fixes
Greg Ungerer [Wed, 6 Dec 2006 01:49:34 +0000]
[PATCH] m68knommu: ColdFire serial driver fixes

Some updates for the old ColdFire serial driver:

 . support 3 and 4 UARTs on some ColdFire parts that have them
 . enable multifunction pins to serial for 527x CPU's
 . support the 5272 UART's fractional baud rate divisor
 . switch driver name to "mcfserial"

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m68knommu: switch 68360 to using rtc_time
Greg Ungerer [Wed, 6 Dec 2006 01:43:14 +0000]
[PATCH] m68knommu: switch 68360 to using rtc_time

Adds support for RTCs (through genrtc) for M68KNOMMU.

Board-specific code will have to link the appropriate RTC driver to the
mach_hwclk callback, at minimum.

This patch switches the 68360 code over to using rtc_time.

Signed-off-by: Gavin Lambert <gavinl@compacsort.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m68knommu: fix timer register access on 523x ColdFire platforms
Greg Ungerer [Wed, 6 Dec 2006 01:36:59 +0000]
[PATCH] m68knommu: fix timer register access on 523x ColdFire platforms

The 523x timer TRR register is a full 32bits, the older register (on
other ColdFire parts) was only 16 bits.  Use the right type of
__raw_read when accessing it.

Problem found by Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m68knommu: implement irq_canonicalize()
Greg Ungerer [Wed, 6 Dec 2006 01:36:13 +0000]
[PATCH] m68knommu: implement irq_canonicalize()

Add a null definition for irq_canonicalize(). It is used in the gerneric
serial subsystem code, can't compile without it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m68knommu: create rtc.h
Greg Ungerer [Wed, 6 Dec 2006 01:35:16 +0000]
[PATCH] m68knommu: create rtc.h

This adds support for RTCs (through genrtc) for M68KNOMMU.

Board-specific code will have to link the appropriate RTC driver to the
mach_hwclk callback, at minimum.

Signed-off-by: Gavin Lambert <gavinl@compacsort.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoActually update the fixed up compile failures.
David Howells [Wed, 6 Dec 2006 15:02:26 +0000]
Actually update the fixed up compile failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
David Howells [Wed, 6 Dec 2006 15:01:18 +0000]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6

Conflicts:

drivers/pcmcia/ds.c

Fix up merge failures with Linus's head and fix new compile failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

14 years agosh: sh775x/titan fixes for irq header changes.
Jamie Lenehan [Wed, 6 Dec 2006 03:05:02 +0000]
sh: sh775x/titan fixes for irq header changes.

The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: update r7780rp defconfig.
Paul Mundt [Wed, 6 Dec 2006 03:02:01 +0000]
sh: update r7780rp defconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: compile fixes for header cleanup.
Paul Mundt [Wed, 6 Dec 2006 02:24:48 +0000]
sh: compile fixes for header cleanup.

Since some header inclusion paths were cleaned up, compilation
broke. Add in the headers we need directly to build again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Fixup pte_mkhuge() build failure.
Paul Mundt [Wed, 6 Dec 2006 02:20:53 +0000]
sh: Fixup pte_mkhuge() build failure.

When hugetlbpage support isn't enabled, this can be bogus.
Wrap it back in _PAGE_FLAGS_HARD to avoid changes to the
base PTE when not aiming for larger sizes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: set KBUILD_IMAGE to something sensible.
Paul Mundt [Wed, 6 Dec 2006 02:08:49 +0000]
sh: set KBUILD_IMAGE to something sensible.

This was missing for sh too, wire it up..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: show held locks in stack trace with lockdep.
Paul Mundt [Wed, 6 Dec 2006 02:07:51 +0000]
sh: show held locks in stack trace with lockdep.

Follows the same change as other architectures..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: platform_pata support for R7780RP
Paul Mundt [Wed, 6 Dec 2006 01:43:44 +0000]
sh: platform_pata support for R7780RP

This adds a platform device for the directly connected
CF interface on R7780RP boards, for use with the
pata_platform libata driver.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: stacktrace/lockdep/irqflags tracing support.
Paul Mundt [Mon, 4 Dec 2006 09:17:28 +0000]
sh: stacktrace/lockdep/irqflags tracing support.

Wire up all of the essentials for lockdep..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Fixup movli.l/movco.l atomic ops for gcc4.
Paul Mundt [Fri, 1 Dec 2006 05:32:54 +0000]
sh: Fixup movli.l/movco.l atomic ops for gcc4.

gcc4 gets a bit pissy about the outputs:

include/asm/atomic.h: In function 'atomic_add':
include/asm/atomic.h:37: error: invalid lvalue in asm statement
include/asm/atomic.h:30: error: invalid lvalue in asm output 1
...

this ended up being a thinko anyways, so just fix it up.

Verified for proper behaviour with the older toolchains, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: dyntick infrastructure.
Paul Mundt [Fri, 1 Dec 2006 04:23:47 +0000]
sh: dyntick infrastructure.

This adds basic NO_IDLE_HZ support to the SH timer API so timers
are able to wire it up. Taken from the ARM version, as it fit in
to our API with very few changes needed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Clock framework tidying.
Paul Mundt [Fri, 1 Dec 2006 04:15:14 +0000]
sh: Clock framework tidying.

This syncs up the SH clock framework with the linux/clk.h API,
for which there were only some minor changes required, namely
the clk_get() dev_id and subsequent callsites.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Turn off IRQs around get_timer_offset() calls.
Paul Mundt [Fri, 1 Dec 2006 04:12:05 +0000]
sh: Turn off IRQs around get_timer_offset() calls.

Since all of the sys_timer sources currently do this on their own
within the ->get_offset() path, it's more sensible to just have
the caller take care of it when grabbing xtime_lock. Incidentally,
this is more in line with what others (ie, ARM) are doing already.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Get the PGD right in oops case with 64-bit PTEs.
Paul Mundt [Fri, 1 Dec 2006 03:14:11 +0000]
sh: Get the PGD right in oops case with 64-bit PTEs.

Previously this was using a static pgd shift in the reporting
code, simply flip this to PGDIR_SHIFT which does the right
thing depending on varying PTE magnitudes on the SH-X2 MMU.

While we're at it, and since it's been recently added, use
get_TTB() for fetching the TTB, rather than the open coded
instructions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Fix store queue bitmap end.
Paul Mundt [Fri, 1 Dec 2006 03:01:43 +0000]
sh: Fix store queue bitmap end.

The end of the store queue bitmap is miscalculated when searching
for a free range in sq_remap(), missing the PAGE_SHIFT shift that's
done in sq_api_init(). This runs in to workloads where we can scan
beyond the end of the bitmap.

Spotted by Paul Jackson:

http://marc.theaimsgroup.com/?l=linux-kernel&m=116493191224097&w

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: More flexible + SH7780 earlyprintk SCIF support.
Paul Mundt [Mon, 27 Nov 2006 03:10:23 +0000]
sh: More flexible + SH7780 earlyprintk SCIF support.

This makes the early printk support somewhat more flexible,
moving the port definition to a config option, and making the
port initialization configurable for sh-ipl+g users.

At the same time, this allows us to trivially wire up the
SH7780 SCIF0, so that's thrown in too more or less for free.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Fixup various PAGE_SIZE == 4096 assumptions.
Paul Mundt [Mon, 27 Nov 2006 03:06:26 +0000]
sh: Fixup various PAGE_SIZE == 4096 assumptions.

There were a number of places that made evil PAGE_SIZE == 4k
assumptions that ended up breaking when trying to play with
8k and 64k page sizes, this fixes those up.

The most significant change is the way we load THREAD_SIZE,
previously this was done via:

mov #(THREAD_SIZE >> 8), reg
shll8 reg

to avoid a memory access and allow the immediate load. With
a 64k PAGE_SIZE, we're out of range for the immediate load
size without resorting to special instructions available in
later ISAs (movi20s and so on). The "workaround" for this is
to bump up the shift to 10 and insert a shll2, which gives a
bit more flexibility while still being much cheaper than a
memory access.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Fixup 4K irq stacks.
Paul Mundt [Fri, 24 Nov 2006 10:46:18 +0000]
sh: Fixup 4K irq stacks.

There was a clobber issue with the register we were saving
the stack in, so we switch to a register that we handle in
the clobber list properly already.

This also follows the x86 changes for allowing the softirq
checks from hardirq context.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: dma-api channel capability extensions.
Mark Glaisher [Fri, 24 Nov 2006 06:13:52 +0000]
sh: dma-api channel capability extensions.

This extends the SH DMA API for allowing handling of DMA
channels based off of their respective capabilities.

A couple of functions are added to the existing API,
the core bits are register_chan_caps() for registering
channel capabilities, and request_dma_bycap() for fetching
a channel dynamically based off of a capability set.

Signed-off-by: Mark Glaisher <mark.glaisher@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Drop name overload in dma-sh.
Paul Mundt [Fri, 24 Nov 2006 05:50:05 +0000]
sh: Drop name overload in dma-sh.

Pass along the dev_id from request_dma() all the way down,
rather than inserting an artificial name relating to the TEI
line that we were doing before.

This makes the line a bit less obvious, but dev_id is the proper
behaviour for this regardless.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Make dma-isa depend on ISA_DMA_API.
Paul Mundt [Fri, 24 Nov 2006 05:48:14 +0000]
sh: Make dma-isa depend on ISA_DMA_API.

Previously we linked in the ISA DMA wrapper unconditionally.
As there are very few users of this, it's better to make it
conditional.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: dma-sysfs fixes.
Paul Mundt [Fri, 24 Nov 2006 05:43:09 +0000]
sh: dma-sysfs fixes.

Handle the case where no registered DMACs exist somewhat more
gracefully. While we're at it, check for sysdev_create_file()
failing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Fix syscall tracing ordering.
Stuart Menefy [Fri, 24 Nov 2006 04:01:36 +0000]
sh: Fix syscall tracing ordering.

The implementation of system call tracing in the kernel has a
couple of ordering problems:

 - the validity of the system call number is checked before
   calling out to system call tracing code, and should be
   done after

 - the system call number used when tracing is the one the
   system call was invoked with, while the system call tracing
   code can legitimatly change the call number (for example
   strace permutes fork into clone)

This patch fixes both of these problems, and also reoders the
code slightly to make the direct path through the code the
common case.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: KSTK_EIP/KSTK_ESP consistency.
Stuart Menefy [Fri, 24 Nov 2006 03:53:02 +0000]
sh: KSTK_EIP/KSTK_ESP consistency.

Two of the fields in /proc/[number]/stat are documented in
proc(5) as:

      kstkesp %lu
     The current value of esp (stack pointer), as
     found in the kernel stack page for the process.

      kstkeip %lu
     The current EIP (instruction pointer).

The SH currently prints the the last SP and PC of the process
inside the kernel, while most other archs use the last user
space values.

This patch modifes the SH to display the user space values.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: TLB miss fast-path optimizations.
Stuart Menefy [Fri, 24 Nov 2006 02:42:24 +0000]
sh: TLB miss fast-path optimizations.

Handle simple TLB miss faults which can be resolved completely
from the page table in assembler.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: R7780RP push-switch support.
Paul Mundt [Fri, 24 Nov 2006 02:24:39 +0000]
sh: R7780RP push-switch support.

This adds simple push-switch support for the RDBRP-1/RDBREVRP-1 debug
boards found on the R7780RP-1.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: generic push-switch framework.
Paul Mundt [Fri, 24 Nov 2006 02:22:57 +0000]
sh: generic push-switch framework.

This adds support for a generic push switch framework. Adaptable for
various switches, including GPIO switches and the push switches commonly
found on Renesas debug boards.

This allows switch states to be trivially reported through sysfs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: pmd rework.
Stuart Menefy [Tue, 21 Nov 2006 06:38:05 +0000]
sh: pmd rework.

Remove extra bits from the pmd structure and store a kernel logical
address rather than a physical address. This allows it to be directly
dereferenced. Another piece of wierdness inherited from x86.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Use MMU.TTB register as pointer to current pgd.
Stuart Menefy [Tue, 21 Nov 2006 04:53:44 +0000]
sh: Use MMU.TTB register as pointer to current pgd.

Add TTB accessor functions and give it a sensible default
value. We will use this later for optimizing the fault
path.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Set up correct siginfo structures for page faults.
Stuart Menefy [Tue, 21 Nov 2006 04:34:04 +0000]
sh: Set up correct siginfo structures for page faults.

Remove the previous saving of fault codes into the thread_struct
as they are never used, and appeared to be inherited from x86.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: gcc4 support.
Stuart Menefy [Tue, 21 Nov 2006 02:16:57 +0000]
sh: gcc4 support.

This fixes up the kernel for gcc4. The existing exception handlers
needed some wrapping for pt_regs access, acessing the registers
via a RELOC_HIDE() pointer.

The strcpy() issues popped up here too, so add -ffreestanding and
kill off the symbol export.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Explicit endian selection support.
Paul Mundt [Tue, 21 Nov 2006 02:12:19 +0000]
sh: Explicit endian selection support.

Previously big endian was simply assumed if little endian was
not set, which led to some cflags ordering issues. There's not
much point to not having a big endian option, so shove one in
a choice and wire it up in the Makefile.

This lets us clean up some of the cflags ordering while we're
at it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: p3map_sem sem2mutex conversion.
Paul Mundt [Tue, 21 Nov 2006 02:09:41 +0000]
sh: p3map_sem sem2mutex conversion.

Simple sem2mutex conversion for the p3map semaphores.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Preliminary support for SH-X2 MMU.
Paul Mundt [Mon, 20 Nov 2006 05:30:26 +0000]
sh: Preliminary support for SH-X2 MMU.

This adds some preliminary support for the SH-X2 MMU, used by
newer SH-4A parts (particularly SH7785).

This MMU implements a 'compat' mode with SH-X MMUs and an
'extended' mode for SH-X2 extended features. Extended features
include additional page sizes (8kB, 4MB, 64MB), as well as the
addition of page execute permissions.

The extended mode attributes are placed in a second data array,
which requires us to switch to 64-bit PTEs when in X2 mode.

With the addition of the exec perms, we also overhaul the mmap
prots somewhat, now that it's possible to handle them more
intelligently.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Hook SH7785 in to the build system.
Paul Mundt [Mon, 20 Nov 2006 05:14:29 +0000]
sh: Hook SH7785 in to the build system.

Simple 7785 placeholders to start hooking up other bits of code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Drop CPU subtype IRQ headers.
Paul Mundt [Mon, 20 Nov 2006 04:55:34 +0000]
sh: Drop CPU subtype IRQ headers.

This drops the various IRQ headers that were floating around
and primarily providing hardcoded IRQ definitions for the
various CPU subtypes. This quickly got to be an unmaintainable
mess, made even more evident by the subtle breakage introduced
by the SH-2 and SH-2A changes.

Now that subtypes are able to register IRQ maps directly, just
rip all of the headers out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Configurable timer IRQ.
Paul Mundt [Mon, 20 Nov 2006 02:18:30 +0000]
sh: Configurable timer IRQ.

All of the various CPU subtypes currently hardcode TIMER_IRQ,
switch this to a config option in the few places we need this.

This allows further removal of hardcoded IRQ headers..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Fixup entry-common path breakage for SH-3.
Paul Mundt [Tue, 7 Nov 2006 10:29:23 +0000]
sh: Fixup entry-common path breakage for SH-3.

The nommu patches broke the path for the common bits, get it building
for the SH-3/4 case again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: SE7206 build fixes.
Paul Mundt [Sun, 5 Nov 2006 07:48:42 +0000]
sh: SE7206 build fixes.

A number of API changes happened underneath the 7206 patches, update
for everything that broke.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Add support for Solution Engine 7206 and 7619 boards.
Yoshinori Sato [Sun, 5 Nov 2006 07:21:09 +0000]
sh: Add support for Solution Engine 7206 and 7619 boards.

This adds support for the Solution Engine 7206 and 7619.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Add SH-2A platform headers.
Yoshinori Sato [Sun, 5 Nov 2006 07:18:08 +0000]
sh: Add SH-2A platform headers.

Mostly SH-2 wrappers..

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Exception vector rework and SH-2/SH-2A support.
Yoshinori Sato [Sun, 5 Nov 2006 07:15:19 +0000]
sh: Exception vector rework and SH-2/SH-2A support.

This splits out common bits from the existing exception handler for
use between SH-2/SH-2A and SH-3/4, and adds support for the SH-2/2A
exceptions.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Wire up division and address error exceptions on SH-2A.
Yoshinori Sato [Sun, 5 Nov 2006 06:58:47 +0000]
sh: Wire up division and address error exceptions on SH-2A.

SH-2A has special division hardware as opposed to a full-fledged FPU,
wire up the exception handlers for this.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agosh: Add support for SH7206 and SH7619 CPU subtypes.
Yoshinori Sato [Sun, 5 Nov 2006 06:40:13 +0000]
sh: Add support for SH7206 and SH7619 CPU subtypes.

This implements initial support for the SH7206 (SH-2A) and SH7619
(SH-2) MMU-less CPUs.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Wed, 6 Dec 2006 00:09:46 +0000]
Merge /pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (73 commits)
  [SCSI] aic79xx: Add ASC-29320LPE ids to driver
  [SCSI] stex: version update
  [SCSI] stex: change wait loop code
  [SCSI] stex: add new device type support
  [SCSI] stex: update device id info
  [SCSI] stex: adjust default queue length
  [SCSI] stex: add value check in hard reset routine
  [SCSI] stex: fix controller_info command handling
  [SCSI] stex: fix biosparam calculation
  [SCSI] megaraid: fix MMIO casts
  [SCSI] tgt: fix undefined flush_dcache_page() problem
  [SCSI] libsas: better error handling in sas_expander.c
  [SCSI] lpfc 8.1.11 : Change version number to 8.1.11
  [SCSI] lpfc 8.1.11 : Misc Fixes
  [SCSI] lpfc 8.1.11 : Add soft_wwnn sysfs attribute, rename soft_wwn_enable
  [SCSI] lpfc 8.1.11 : Removed decoding of PCI Subsystem Id
  [SCSI] lpfc 8.1.11 : Add MSI (Message Signalled Interrupts) support
  [SCSI] lpfc 8.1.11 : Adjust LOG_FCP logging
  [SCSI] lpfc 8.1.11 : Fix Memory leaks
  [SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_support
  ...

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
Linus Torvalds [Tue, 5 Dec 2006 23:52:06 +0000]
Merge /pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  [PATCH] pcmcia: at91_cf update
  [PATCH] pcmcia: fix m32r_cfc.c compilation
  [PATCH] pcmcia: ds.c debug enhancements
  [PATCH] pcmcia: at91_cf update
  [PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation
  [PATCH] pcmcia: remove prod_id indirection
  [PATCH] pcmcia: remove manf_id and card_id indirection
  [PATCH] pcmcia: IDs for Elan serial PCMCIA devcies
  [PATCH] pcmcia: allow for four multifunction subdevices
  [PATCH] pcmcia: handle __copy_from_user() return value in ioctl
  [PATCH] pcmcia: multifunction card handling fixes
  [PATCH] pcmcia: allow shared IRQs on pd6729 sockets
  [PATCH] pcmcia: start over after CIS override
  [PATCH] cm4000_cs: fix return value check
  [PATCH] pcmcia: yet another IDE ID
  [PATCH] pcmcia: Add an id to ide-cs.c

14 years ago[SCSI] aic79xx: Add ASC-29320LPE ids to driver
Salyzyn, Mark [Tue, 5 Dec 2006 19:37:30 +0000]
[SCSI] aic79xx: Add ASC-29320LPE ids to driver

Simple patch to add the new PCIe version of the 29320 card.

Signed-off: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years agoWorkQueue: Fix up arch-specific work items where possible
David Howells [Tue, 5 Dec 2006 19:36:26 +0000]
WorkQueue: Fix up arch-specific work items where possible

Fix up arch-specific work items where possible to use the new work_struct and
delayed_work structs.

Three places that enqueue bits of their stack and then return have been marked
with #error as this is not permitted.

Signed-Off-By: David Howells <dhowells@redhat.com>

14 years ago[SCSI] stex: version update
Ed Lin [Tue, 5 Dec 2006 01:49:46 +0000]
[SCSI] stex: version update

Update version to 3.1.0.1

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] stex: change wait loop code
Ed Lin [Tue, 5 Dec 2006 01:49:42 +0000]
[SCSI] stex: change wait loop code

The original wait loop may be much longer than intended time.
Use more accurate timer_after for it. Also adjust wait value to
avoid unnecessary long waiting.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] stex: add new device type support
Ed Lin [Tue, 5 Dec 2006 01:49:39 +0000]
[SCSI] stex: add new device type support

Add support for st_vsc1 type device (st_vsc is ok because it does not
require extra buffer).

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] stex: update device id info
Ed Lin [Tue, 5 Dec 2006 01:49:36 +0000]
[SCSI] stex: update device id info

- add comments for various devices
- remove unused device ids(0xf350, 0x4301, 0x8301, 0x8302)
- add new device id(0xe350)
- fix vendor id of st_vsc
- modify Kconfig help info

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] stex: adjust default queue length
Ed Lin [Tue, 5 Dec 2006 01:49:34 +0000]
[SCSI] stex: adjust default queue length

Firmware of new version may adjust default queue length. It is
backward compatible.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] stex: add value check in hard reset routine
Ed Lin [Tue, 5 Dec 2006 01:49:31 +0000]
[SCSI] stex: add value check in hard reset routine

During hard reset, an all-1 value from PCI_COMMAND should be invalid.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] stex: fix controller_info command handling
Ed Lin [Tue, 5 Dec 2006 01:49:28 +0000]
[SCSI] stex: fix controller_info command handling

This command needs information from both firmware and driver. First copy
information from firmware to buffer, then fill in driver information.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] stex: fix biosparam calculation
Ed Lin [Tue, 5 Dec 2006 01:49:24 +0000]
[SCSI] stex: fix biosparam calculation

Fix biosparam calculation.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
David Howells [Tue, 5 Dec 2006 17:01:28 +0000]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6

Conflicts:

drivers/ata/libata-scsi.c
include/linux/libata.h

Futher merge of Linus's head and compilation fixups.

Signed-Off-By: David Howells <dhowells@redhat.com>

14 years ago[SCSI] megaraid: fix MMIO casts
Jeff Garzik [Mon, 4 Dec 2006 01:49:23 +0000]
[SCSI] megaraid: fix MMIO casts

megaraid's MMIO RD*/WR* macros directly call readl() and writel() with
an 'unsigned long' argument.  This throws a warning, but is otherwise OK
because the 'unsigned long' is really the result of ioremap().  This
setup is also OK because the variable can hold an ioremap cookie /or/ a
PCI I/O port (PIO).

However, to fix the warning thrown when readl() and writel() are passed
an unsigned long cookie, I introduce 'void __iomem *mmio_base', holding
the same value as 'base'.  This will silence the warnings, and also
cause an oops whenever these MMIO-only functions are ever accidentally
passed an I/O address.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] tgt: fix undefined flush_dcache_page() problem
akpm@osdl.org [Tue, 5 Dec 2006 07:06:48 +0000]
[SCSI] tgt: fix undefined flush_dcache_page() problem

drivers/scsi/scsi_tgt_if.c: In function 'tgt_uspace_send_event':
drivers/scsi/scsi_tgt_if.c:88: warning: implicit declaration of function 'flush_dcache_page'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
David Howells [Tue, 5 Dec 2006 14:37:56 +0000]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6

Conflicts:

drivers/infiniband/core/iwcm.c
drivers/net/chelsio/cxgb2.c
drivers/net/wireless/bcm43xx/bcm43xx_main.c
drivers/net/wireless/prism54/islpci_eth.c
drivers/usb/core/hub.h
drivers/usb/input/hid-core.c
net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

14 years ago[PATCH] Centralise definitions of sector_t and blkcnt_t
Matthew Wilcox [Mon, 4 Dec 2006 10:38:31 +0000]
[PATCH] Centralise definitions of sector_t and blkcnt_t

CONFIG_LBD and CONFIG_LSF are spread into asm/types.h for no particularly
good reason.

Centralising the definition in linux/types.h means that arch maintainers
don't need to bother adding it, as well as fixing the problem with
x86-64 users being asked to make a decision that has absolutely no
effect.

The H8/300 porters seem particularly confused since I'm not aware of any
microcontrollers that need to support 2TB filesystems.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Tue, 5 Dec 2006 03:38:30 +0000]
Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] blktrace: don't return blktrace_seq from trace_note()
  [PATCH] blktrace: uninline trace_note()

14 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Tue, 5 Dec 2006 03:33:45 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits)
  ocfs2: implement i_op->permission
  configfs: make configfs_dirent_exists() static
  ocfs2: update file system paths to set atime
  ocfs2: core atime update functions
  ocfs2: Add splice support
  ocfs2: Remove ocfs2_write_should_remove_suid()
  [PATCH] Export should_remove_suid()
  configfs: mutex_lock_nested() fix
  ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t
  ocfs2: remove handle argument to ocfs2_start_trans()
  ocfs2: remove ocfs2_journal_handle journal field
  ocfs2: pass ocfs2_super * into ocfs2_commit_trans()
  ocfs2: remove unused handle argument from ocfs2_meta_lock_full()
  ocfs2: make ocfs2_alloc_handle() static
  ocfs2: remove unused ocfs2_handle_add_lock()
  ocfs2: remove unused ocfs2_handle_add_inode()
  ocfs2: Don't allocate handle early in ocfs2_rename()
  ocfs2: don't use handle for locking in allocation functions
  ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_rename()
  ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_symlink()
  ...

14 years ago[PATCH] remote memory corruptor in ibmtr.c
Al Viro [Mon, 4 Dec 2006 22:05:09 +0000]
[PATCH] remote memory corruptor in ibmtr.c

ip_summed changes last summer had missed that one.  As the result,
we have ip_summed interpreted as CHECKSUM_PARTIAL now.  IOW,
->csum is interpreted as offset of checksum in the packet.  net/core/*
will both read and modify the value as that offset, with obvious
reasons.  At the very least it's a remote memory corruptor.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] selinux endianness annotations
Al Viro [Mon, 4 Dec 2006 22:00:55 +0000]
[PATCH] selinux endianness annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 5 Dec 2006 03:23:34 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Cleanup memory barriers for weakly ordered systems.
  [MIPS] Alchemy: Automatically enable CONFIG_RESOURCES_64BIT for PCI configs.
  [MIPS] Unify csum_partial.S
  [MIPS] SWARM: Fix a typo in #error directives
  [MIPS] Fix atomic.h build errors.
  [MIPS] Use SYSVIPC_COMPAT to fix various problems on N32
  [MIPS] klconfig add missing bracket

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Tue, 5 Dec 2006 03:22:33 +0000]
Merge /pub/scm/linux/kernel/git/paulus/powerpc

* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (194 commits)
  [POWERPC] Add missing EXPORTS for mpc52xx support
  [POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment
  [POWERPC] ps3: add a default zImage target
  [POWERPC] Add of_platform_bus support to mpc52xx psc uart driver
  [POWERPC] typo fix and whitespace cleanup on mpc52xx-uart driver
  [POWERPC] Fix debug printks for 32-bit resources in the PCI code
  [POWERPC] Replace kmalloc+memset with kzalloc
  [POWERPC] Linkstation / kurobox support
  [POWERPC] Add the e300c3 core to the CPU table.
  [POWERPC] ppc: m48t35 add missing bracket
  [POWERPC] iSeries: don't build head_64.o unnecessarily
  [POWERPC] iSeries: stop dt_mod.o being rebuilt unnecessarily
  [POWERPC] Fix cputable.h for combined build
  [POWERPC] Allow CONFIG_BOOTX_TEXT on iSeries
  [POWERPC] Allow xmon to build on legacy iSeries
  [POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3
  [POWERPC] Tell firmware we can handle POWER6 compatible mode
  [POWERPC] Clean images in arch/powerpc/boot
  [POWERPC] Fix OF pci flags parsing
  [POWERPC] defconfig for lite5200 board
  ...

14 years ago[PATCH] pcmcia: at91_cf update
Andrew Victor [Mon, 4 Dec 2006 10:26:36 +0000]
[PATCH] pcmcia: at91_cf update

This is an update to the AT91 CompactFlash driver.

We replace the hard-coded "chip select 4" with the chip-select value
passed via platform_data.  The configuration of the EBI memory
controller to enable Compact Flash access is now also handled in the
platform setup code and not in the driver.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: fix m32r_cfc.c compilation
Adrian Bunk [Sat, 2 Dec 2006 17:55:06 +0000]
[PATCH] pcmcia: fix m32r_cfc.c compilation

More fallout of the post 2.6.19-rc1 IRQ changes...

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: ds.c debug enhancements
Dominik Brodowski [Sat, 2 Dec 2006 20:11:44 +0000]
[PATCH] pcmcia: ds.c debug enhancements

Add verbose error messages and debug information to ds.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: at91_cf update
Andrew Victor [Mon, 6 Nov 2006 13:56:07 +0000]
[PATCH] pcmcia: at91_cf update

This is an update to the AT91RM9200 CompactFlash driver.

The changes include:
- Use the I/O memory address passed via the platform_device resources
  instead of constant global values.
- The IRQ should not be used as a random'ness source.
- Return errors if ioremap() or request_mem_region() fails.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation
Dominik Brodowski [Thu, 26 Oct 2006 01:49:27 +0000]
[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation

struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost
all PCMICA driver right at the beginning, using the same calls but slightly
different implementations. Unfiy this in the PCMCIA core.

Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused
label") from and Signed-off-by Adrian Bunk <bunk@stusta.de>

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: remove prod_id indirection
Dominik Brodowski [Sun, 4 Jun 2006 16:06:13 +0000]
[PATCH] pcmcia: remove prod_id indirection

As we read out the product information strings (VERS_1) from the PCMCIA device
in the PCMCIA core, and device drivers can access those reliably in struct
pcmcia_device's fields prod_id[], remove additional product information string
detection logic from PCMCIA device drivers.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: remove manf_id and card_id indirection
Dominik Brodowski [Thu, 26 Oct 2006 01:28:53 +0000]
[PATCH] pcmcia: remove manf_id and card_id indirection

As we read out the manufactor and card_id from the PCMCIA device in the
PCMCIA core, and device drivers can access those reliably in struct
pcmcia_device's fields manf_id and card_id, remove additional (and partly
broken) manf_id and card_id detection logic from PCMCIA device drivers.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: IDs for Elan serial PCMCIA devcies
Tony Olech [Wed, 29 Nov 2006 08:54:51 +0000]
[PATCH] pcmcia: IDs for Elan serial PCMCIA devcies

Add IDs for Elan serial PCMCIA devices. In addition, move the
pdaudio_cf driver from matching based on manf_id and card_id to
the more specific prod_id1 and prod_id2 to avoid false
positives.

Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: allow for four multifunction subdevices
Dominik Brodowski [Tue, 28 Nov 2006 02:03:48 +0000]
[PATCH] pcmcia: allow for four multifunction subdevices

Some Elan serial cards allow for four (independent) multifunction
subdevices. Teach the PCMCIA core to deal with such devices.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: handle __copy_from_user() return value in ioctl
Dominik Brodowski [Sun, 19 Nov 2006 16:21:27 +0000]
[PATCH] pcmcia: handle __copy_from_user() return value in ioctl

Handle __copy_from_user() return value.

drivers/pcmcia/pcmcia_ioctl.c:597: warning: ignoring return value of '__copy_from_user', declared with attribute warn_unused_result

Noticed and first fix by Randy Dunlap.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: multifunction card handling fixes
Dominik Brodowski [Tue, 7 Nov 2006 02:52:16 +0000]
[PATCH] pcmcia: multifunction card handling fixes

s->functions needs to be initialized earlier, for the "let's see
how high it increases" approach means that pcmcia_request_irq()
(which makes use of this value) is confused, and might request
an exclusive IRQ first even though it is not supposed to.

Also, a CIS override autoloaded using the firmware loader may
allow for the use of more or less functions in a multifunction
card. Therefore, we may need to schedule a call to add this
second function later on, or simply remove the other function
(it's always the first -valid- function which reaches this
codepath).

Many thanks to Fabrice Bellet for debugging and testing patches.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: allow shared IRQs on pd6729 sockets
Komuro [Sat, 4 Nov 2006 01:00:47 +0000]
[PATCH] pcmcia: allow shared IRQs on pd6729 sockets

Use IRQF_PROBE_SHARED flag for request_irq() to find an unused
interrupt for PCMCIA cards.

Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: start over after CIS override
Dominik Brodowski [Fri, 3 Nov 2006 15:54:00 +0000]
[PATCH] pcmcia: start over after CIS override

When overriding the CIS, re-start the configuration of the card from
scratch. Reported and debugged by Fabrice Bellet <fabrice@bellet.info>

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] cm4000_cs: fix return value check
Akinobu Mita [Tue, 17 Oct 2006 06:25:59 +0000]
[PATCH] cm4000_cs: fix return value check

The return value of class_create() need to be checked with IS_ERR().
And register_chrdev() returns errno on failure.
This patch includes these fixes for cm4000_cs and cm4040_cs.

Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: yet another IDE ID
Marcin Juszkiewicz [Mon, 30 Oct 2006 21:28:09 +0000]
[PATCH] pcmcia: yet another IDE ID

Microdrive reported by one of OpenEmbedded developers.

product info: "WEIDA", "TWTTI", ""
manfid: 0x000a, 0x0000
function: 4 (fixed disk)

(equivalent update to pata_pcmcia.c by Dominik Brodowski)

Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[PATCH] pcmcia: Add an id to ide-cs.c
Matt Reimer [Thu, 26 Oct 2006 22:56:00 +0000]
[PATCH] pcmcia: Add an id to ide-cs.c

Add an ID entry for:

product info: "TRANSCEND", "TS1GCF80", "", ""
manfid: 0x000a, 0x0000
function: 4 (fixed disk)

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

14 years ago[POWERPC] Add missing EXPORTS for mpc52xx support
Grant Likely [Tue, 5 Dec 2006 00:29:12 +0000]
[POWERPC] Add missing EXPORTS for mpc52xx support

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

14 years ago[POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment
Grant Likely [Tue, 5 Dec 2006 00:29:13 +0000]
[POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment

The support for the 52xx-based systems is now included under
CONFIG_CLASSIC32, since the 52xx chips have a 603e-based core.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

14 years ago[POWERPC] ps3: add a default zImage target
Geoff Levand [Tue, 5 Dec 2006 00:11:38 +0000]
[POWERPC] ps3: add a default zImage target

Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and
set this as the default image to build for that platform.

Until the compressed zImage wrapper is made, this arranges for a stripped
vmlinux image to be built.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

14 years ago[POWERPC] Add of_platform_bus support to mpc52xx psc uart driver
Grant Likely [Mon, 27 Nov 2006 21:21:02 +0000]
[POWERPC] Add of_platform_bus support to mpc52xx psc uart driver

Needed to support mpc52xx boards in arch/powerpc.  This patch
retains the platform_bus support when compiling for arch/ppc,
but uses the of_platform bindings for arch/powerpc.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>