10 years ago[SCSI] cxgb3i: fixed connection over vlan
kxie@chelsio.com [Thu, 23 Sep 2010 23:43:23 +0000]
[SCSI] cxgb3i: fixed connection over vlan

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] libcxgbi: pdu read fixes
kxie@chelsio.com [Thu, 23 Sep 2010 23:43:23 +0000]
[SCSI] libcxgbi: pdu read fixes

Fixed the locking and releasing skb in the case of error in the pdu
read path, and added define iscsi_task_cxgbi_data to access the
private data inside the iscsi_task.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] cxgbi: rename alloc_cpl to alloc_wr
kxie@chelsio.com [Thu, 23 Sep 2010 23:43:23 +0000]
[SCSI] cxgbi: rename alloc_cpl to alloc_wr

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] ibmvfc: Handle Virtual I/O Server reboot
Brian King [Tue, 21 Sep 2010 15:17:11 +0000]
[SCSI] ibmvfc: Handle Virtual I/O Server reboot

If a Virtual I/O server is rebooted, the client fibre channel sees a
transport event on its CRQ, which causes it to attempt to reconnect
to the CRQ. For a period of time during the VIOS reboot, the client's
attempts to register the CRQ will return H_CLOSED, indicating the server
side is not currently registered. The ibmvfc driver was not handling
this well and was taking the virtual adapter offline. Fix this by
re-enabling our interrupt and waiting for the event on our CRQ
indicating the server is back, at which point we can reconnect.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] sd name space exhaustion causes system hang
Michael Reed [Mon, 20 Sep 2010 16:20:22 +0000]
[SCSI] sd name space exhaustion causes system hang

Following a site power outage which re-enabled all the ports on my FC
switches, my system subsequently booted with far too many luns!  I had
let it run hoping it would make multi-user.  It didn't.  :(  It hung solid
after exhausting the last sd device, sdzzz, and attempting to create sdaaaa
and beyond.  I was unable to get a dump.

Discovered using a 2.6.32.13 based system.

correct this by detecting when the last index is utilized and failing
the sd probe of the device.  Patch applies to scsi-misc-2.6.

Signed-off-by: Michael Reed <mdr@sgi.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] fc class: add fc host dev loss sysfs file
Mike Christie [Wed, 15 Sep 2010 21:52:32 +0000]
[SCSI] fc class: add fc host dev loss sysfs file

This adds a fc host dev loss sysfs file. Instead of
calling into the driver using the get_host_def_dev_loss_tmo
callback, we allow drivers to init the dev loss like is done
for other fc host params, and then the fc class will handle
updating the value if the user writes to the new sysfs file.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] lpfc: prep for fc host dev loss tmo support
Mike Christie [Wed, 15 Sep 2010 21:52:31 +0000]
[SCSI] lpfc: prep for fc host dev loss tmo support

This removes the driver's get_host_def_dev_loss_tmo
callback and just has the driver set the dev loss
using the fc class fc_host_dev_loss_tmo macro like is
done for other fc params.

It also adds compat support for the driver's existing
dev loss and nodev sysfs and modparams.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: prep for fc host dev loss tmo support
Mike Christie [Wed, 15 Sep 2010 21:52:30 +0000]
[SCSI] qla2xxx: prep for fc host dev loss tmo support

This removes the driver's get_host_def_dev_loss_tmo
callback and just has the driver set the dev loss
using the fc class fc_host_dev_loss_tmo macro like is
done for other fc params.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] ibmvfc: prep for fc host dev loss tmo support
Mike Christie [Wed, 15 Sep 2010 21:52:29 +0000]
[SCSI] ibmvfc: prep for fc host dev loss tmo support

This removes the driver's get_host_def_dev_loss_tmo
callback and just has the driver set the dev loss
using the fc class fc_host_dev_loss_tmo macro like is
done for other fc params.

This patch also removes the module dev loss param.
To override the value the fc host sysfs value being
added in the fc class patch can be used instead of the driver
module param.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] fnic: prep for fc host dev loss tmo support
Mike Christie [Wed, 15 Sep 2010 21:52:28 +0000]
[SCSI] fnic: prep for fc host dev loss tmo support

This removes the driver's get_host_def_dev_loss_tmo
callback and just has the driver set the dev loss
using the fc class fc_host_dev_loss_tmo macro like is
done for other fc params.

This also adds a set rport dev loss function so the
fc class host dev loss tmp sysfs support being added
in the fc class patch can update rports.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla4xxx: fix build on PPC
Jiri Slaby [Tue, 14 Sep 2010 12:12:54 +0000]
[SCSI] qla4xxx: fix build on PPC

We use read/write[bslq] but do not include linux/io.h. This causes
build failures on PPC. Include that file.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Stable Tree <stable@kernel.org>
Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] libsas: fix NCQ mixing with non-NCQ
David Milburn [Fri, 3 Sep 2010 22:13:03 +0000]
[SCSI] libsas: fix NCQ mixing with non-NCQ

Some cards (like mvsas) have issue troubles if non-NCQ commands are
mixed with NCQ ones.  Fix this by using the libata default NCQ check
routine which waits until all NCQ commands are complete before issuing
a non-NCQ one.  The impact to cards (like aic94xx) which don't need
this logic should be minimal

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] sd: Update thin provisioning support
Martin K. Petersen [Fri, 10 Sep 2010 05:22:07 +0000]
[SCSI] sd: Update thin provisioning support

Add support for the Thin Provisioning VPD page and use the TPU and TPWS
bits to switch between UNMAP and WRITE SAME(16) for discards.  If no TP
VPD page is present we fall back to old scheme where the max descriptor
count combined with the max lba count are used trigger UNMAP.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] bfa: cleanup driver
Krishna Gudipati [Wed, 15 Sep 2010 18:50:55 +0000]
[SCSI] bfa: cleanup driver

We have flattened the BFA hierarchy and also reduced the number of
source and header files we used to have earlier.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Replace status modifier functions.
Swen Schillig [Wed, 8 Sep 2010 12:40:01 +0000]
[SCSI] zfcp: Replace status modifier functions.

Replace the zfcp_modify_<xxx>_status functions and its accompanying wrappers
with dedicated status modifier functions. This eases code readability and
maintenance.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Remove duplicated code from zfcp_ccw_set_online
Christof Schmitt [Wed, 8 Sep 2010 12:40:00 +0000]
[SCSI] zfcp: Remove duplicated code from zfcp_ccw_set_online

The steps for setting the zfcp_adapter online are the same in
zfcp_ccw_set_online and zfcp_ccw_activate. Remove the code duplication
by calling zfcp_ccw_activate from zfcp_ccw_set_online.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Move ACL/CFDC code to zfcp_cfdc.c
Christof Schmitt [Wed, 8 Sep 2010 12:39:59 +0000]
[SCSI] zfcp: Move ACL/CFDC code to zfcp_cfdc.c

Move the code evaluating the ACL/CFDC specific errors to the file
zfcp_cfdc.c. With this change, all code related to the old access
control feature is kept in one file, not split across zfcp_erp.c and
zfcp_fsf.c.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Reorder FCP I/O and task management handler functions
Christof Schmitt [Wed, 8 Sep 2010 12:39:58 +0000]
[SCSI] zfcp: Reorder FCP I/O and task management handler functions

Instead of calling the same handler for both, I/O and task management
commands, use different handlers that call a function for the common
part.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Change spin_lock_bh to spin_lock_irq to fix lockdep warning
Christof Schmitt [Wed, 8 Sep 2010 12:39:57 +0000]
[SCSI] zfcp: Change spin_lock_bh to spin_lock_irq to fix lockdep warning

With the change to use the data on the SCSI device, iterating through
all LUNs/scsi_devices takes the SCSI host_lock. This triggers warnings
from the lock dependency checker:

=========================================================
[ INFO: possible irq lock inversion dependency detected ]
2.6.34.1 #97
---------------------------------------------------------
chchp/3224 just changed the state of lock:
 (&(shost->host_lock)->rlock){-.-...}, at: [<00000000003a73f4>] __scsi_iterate_devices+0x38/0xbc
but this lock took another, HARDIRQ-unsafe lock in the past:
 (&(&qdio->req_q_lock)->rlock){+.-...}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this: [   24.972394] 2 locks held by chchp/3224:
 #0:  (&(sch->lock)->rlock){-.-...}, at: [<0000000000401efa>] do_IRQ+0xb2/0x1e4
 #1:  (&adapter->port_list_lock){.-....}, at: [<0000000000490302>] zfcp_erp_modify_adapter_status+0x9e/0x16c
[...]

=========================================================
[ INFO: possible irq lock inversion dependency detected ]
2.6.34.1 #98
---------------------------------------------------------
chchp/3235 just changed the state of lock:
 (&(shost->host_lock)->rlock){-.-...}, at: [<00000000003a73f4>] __scsi_iterate_devices+0x38/0xbc
but this lock took another, HARDIRQ-unsafe lock in the past:
 (&(&qdio->stat_lock)->rlock){+.-...}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
2 locks held by chchp/3235:
 #0:  (&(sch->lock)->rlock){-.-...}, at: [<0000000000401efa>] do_IRQ+0xb2/0x1e4
 #1:  (&adapter->port_list_lock){.-.-..}, at: [<00000000004902f6>] zfcp_erp_modify_adapter_status+0x9e/0x16c
[...]

To stop this warning, change the request queue lock to disable irqs,
not only softirq. The changes are required only outside of the
critical "send fcp command" path.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode
Christof Schmitt [Wed, 8 Sep 2010 12:39:56 +0000]
[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode

Enable the LUN scanning mechanism in the SCSI midlayer:
- Do not set the disable_target_scan bit in the FC transport class.
- Set max_lun to 0xFFFFFFFF to allow the midlayer scan to include
  the two-level hierachical LUNs (like 0x40XX40XX00000000, but in SCSI
  midlayer LUN format).
- Set max_id to a high value to allow triggering the SCSI device
  rescan from sysfs.

When running in NPIV mode, zfcp accepts all LUNs in slave_attach. When
running in non-NPIV mode, the list of zfcp_unit structs determines
which SCSI devices are allowed on the current system.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit
Christof Schmitt [Wed, 8 Sep 2010 12:39:55 +0000]
[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit

This is the large change to switch from using the data in
zfcp_unit to zfcp_scsi_dev. Keeping everything working requires doing
the switch in one piece. To ensure that no code keeps using the data
in zfcp_unit, this patch also removes the data from zfcp_unit that is
now being replaced with zfcp_scsi_dev.

For zfcp, the scsi_device together with zfcp_scsi_dev exist from the
call of slave_alloc to the call of slave_destroy. The data in
zfcp_scsi_dev is initialized in zfcp_scsi_slave_alloc and the LUN is
opened; the final shutdown for the LUN is run from slave_destroy.

Where the scsi_device or zfcp_scsi_dev is needed, the pointer to the
scsi_device is passed as function argument and inside the function
converted to the pointer to zfcp_scsi_dev; this avoids back and forth
conversion betweeen scsi_device and zfcp_scsi_dev.

While changing the function arguments from zfcp_unit to scsi_device,
the functions names are renamed form "unit" to "lun". This is to have
a seperation between zfcp_scsi_dev/LUN and the zfcp_unit; only code
referring to the remaining configuration information in zfcp_unit
struct uses "unit".

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Allow running unit/LUN shutdown without acquiring reference
Christof Schmitt [Wed, 8 Sep 2010 12:39:54 +0000]
[SCSI] zfcp: Allow running unit/LUN shutdown without acquiring reference

With the change for the LUN data to be part of the scsi_device, the
slave_destroy callback will be the final call to the
zfcp_erp_unit_shutdown function. The erp tries to acquire a reference
to run the action asynchronously and fail, if it cannot get the
reference. But calling scsi_device_get from slave_destroy will fail,
because the scsi_device is already in the state SDEV_DEL.

Introduce a new call into the zfcp erp to solve this: The function
zfcp_erp_unit_shutdown_wait will close the LUN and wait for the erp to
finish without acquiring an additional reference. The wait allows to
omit the reference; the caller waiting for the erp to finish already
has a reference that holds the struct in place.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Remove ZFCP_SYSFS_FAILED macro and implement fcp_lun_show without macro
Christof Schmitt [Wed, 8 Sep 2010 12:39:53 +0000]
[SCSI] zfcp: Remove ZFCP_SYSFS_FAILED macro and implement fcp_lun_show without macro

These sysfs attributes will require different functions. Implement
them without using macros, so that the open coded functions can be
changed later.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Move code for managing zfcp_unit devices to new file
Christof Schmitt [Wed, 8 Sep 2010 12:39:52 +0000]
[SCSI] zfcp: Move code for managing zfcp_unit devices to new file

Move the code for managing zfcp_unit devices to the new file
zfcp_unit.c. This is in preparation for the change that zfcp_unit will
only track the LUNs configured via unit_add, other data will be moved
from zfcp_unit to the new struct zfcp_scsi_dev.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Add zfcp private struct as SCSI device driver data
Christof Schmitt [Wed, 8 Sep 2010 12:39:51 +0000]
[SCSI] zfcp: Add zfcp private struct as SCSI device driver data

Add a new data structure zfcp_scsi_dev that holds zfcp private data
for each SCSI device. Use scsi_transport_reserve_device to let the
SCSI midlayer automatically allocate this with each SCSI device.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] ibmvfc: Log link up/down events
Brian King [Thu, 9 Sep 2010 21:20:42 +0000]
[SCSI] ibmvfc: Log link up/down events

By default, ibmvfc does not log any async events in order
to avoid flooding the log with them. Improve on this by
logging by default events that are not likely to flood the
log, such as link up/down. Having these events in the log
will improve the ability to debug issues with ibmvfc.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: ROM lock recovery if fw hangs while holding the lock.
Shyam Sundar [Wed, 8 Sep 2010 03:55:32 +0000]
[SCSI] qla2xxx: ROM lock recovery if fw hangs while holding the lock.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] aacraid: semaphore cleanup
Thomas Gleixner [Tue, 7 Sep 2010 14:32:47 +0000]
[SCSI] aacraid: semaphore cleanup

Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: aacraid@adaptec.com
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] scsi_debug: Convert to use root_device_register() and root_device_unregister()
Nicholas Bellinger [Tue, 7 Sep 2010 00:24:28 +0000]
[SCSI] scsi_debug: Convert to use root_device_register() and root_device_unregister()

This patch updates the scsi_debug virtual LLD to use
root_device_register() and root_device_unregister() from
include/linux/device.h instead of device_register() and
device_unregister() respectively within scsi_debug_init() and
scsi_debug_exit() This simply involved converting the static struct
device pseudo_primary into a pointer that is setup by the call to
root_device_register().

This patch also contains the correct IS_ERR() conditional check of
root_device_register() from within scsi_debug_init().

Thanks to Richard Sharpe and Dmitry Torokhov for their help with this
item.

Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] scsi_transport_fc: fix blocked bsg request when fc object deleted
James Smart [Wed, 1 Sep 2010 02:27:31 +0000]
[SCSI] scsi_transport_fc: fix blocked bsg request when fc object deleted

When an rport is "blocked" and a bsg request is received, the bsg request gets
placed on the queue but the queue stalls. If the fc object is then deleted - the
bsg queue never restarts and keeps the reference on the object, and stops the
overall teardown.

This patch restarts the bsg queue on teardown and drains any pending requests,
allowing the teardown to succeed.

Signed-off-by: Carl Lajeunesse <carl.lajeunesse@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] zfcp: Reorder registration of initial SCSI device
Christof Schmitt [Mon, 30 Aug 2010 08:55:09 +0000]
[SCSI] zfcp: Reorder registration of initial SCSI device

Make sure that the rport registration did complete and then register
SCSI device directly. Otherwise the unit_enqueue would race with the
call to zfcp_scsi_queue_unit_register.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] ipr: reverse the isr optimization changes
Wayne Boyer [Fri, 27 Aug 2010 21:45:07 +0000]
[SCSI] ipr: reverse the isr optimization changes

The isr optimization patch that was submitted a few months ago
exposed problems with receiving and handling spurious HRRQ interrutps.

commit 64ffdb762241c0a9c0c8fac7ea92aa0ba1529334
Author: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Date:   Wed May 19 11:56:13 2010 -0700

    [SCSI] ipr: improve interrupt service routine performance

That patch is reverted with this one.  A new patch will be submitted
once the issue is better understood and properly handled in the driver.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] scsi_debug: Update thin provisioning support
Martin K. Petersen [Thu, 19 Aug 2010 15:49:00 +0000]
[SCSI] scsi_debug: Update thin provisioning support

The previous thin provisioning support was not very user friendly
because it depended on all the relevant options being set on the command
line.

Implement support for the Thin Provisioning VPD page from SBC3 r24 and
add module options for TPU (UNMAP) and TPWS (WRITE SAME (16) with UNMAP
bit).  This allows us to have sane default and to enable thin
provisioning with a simple tpu=1 or tpws=1 on the command line depending
on whether we want UNMAP or WRITE SAME behavior.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] fix kconfig dependency warnings related to SCSI_SAS_ATTRS
Randy Dunlap [Wed, 18 Aug 2010 16:28:43 +0000]
[SCSI] fix kconfig dependency warnings related to SCSI_SAS_ATTRS

Fix kconfig dependency warnings in scsi/Kconfig:

warning: (SCSI_SAS_LIBSAS && SCSI || SCSI_MPT2SAS && SCSI_LOWLEVEL && PCI && SCSI || FUSION_SAS && FUSION && PCI && SCSI) selects SCSI_SAS_ATTRS which has unmet direct dependencies (SCSI && BLK_DEV_BSG)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] pm8001: handle allocation failures
Dan Carpenter [Tue, 17 Aug 2010 11:54:57 +0000]
[SCSI] pm8001: handle allocation failures

Return -ENOMEM if the allocations fail.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] iscsi transport: fix kernel-doc notation
Randy Dunlap [Sat, 14 Aug 2010 20:05:41 +0000]
[SCSI] iscsi transport: fix kernel-doc notation

Fix typo in scsi_transport_iscsi.c kernel-doc notation:

Warning(drivers/scsi/scsi_transport_iscsi.c:548): No description found for parameter 'cmd'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: AER Support-Return recovered from mmio_enable function for 82XX.
Saurav Kashyap [Fri, 3 Sep 2010 22:20:57 +0000]
[SCSI] qla2xxx: AER Support-Return recovered from mmio_enable function for 82XX.

Return recovered from pci_mmio_enabled function if it is 82XX.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: Increase SG table size to support large IO size per scsi command.
Giridhar Malavali [Fri, 3 Sep 2010 22:20:56 +0000]
[SCSI] qla2xxx: Increase SG table size to support large IO size per scsi command.

The sg table size is increased from 128 to 1024 to support multiple sg lists
and number of sg elements per scsi command.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: Clear local references of rport on device loss timeout notification...
Giridhar Malavali [Fri, 3 Sep 2010 22:20:55 +0000]
[SCSI] qla2xxx: Clear local references of rport on device loss timeout notification from FC transport.

The clearing of local references to rport was blocked when abort is
active. This code clears the local references unconditionaly upon
device loss timeout callback from FC transport.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: Handle MPI timeout indicated by AE8002
Madhuranath Iyengar [Fri, 3 Sep 2010 22:20:54 +0000]
[SCSI] qla2xxx: Handle MPI timeout indicated by AE8002

In case the MPI times out, the FW issues an async event AE8002
to indicate this to every FCoE function. The FC/FCoE driver is
required to handle this, by doing a soft reset and issuing a
Write MPI register mailbox command to reset the MPI.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: Update to AER support, do early abort commands.
Lalit Chandivade [Fri, 3 Sep 2010 22:20:53 +0000]
[SCSI] qla2xxx: Update to AER support, do early abort commands.

Currently the IOs are returned back in slot reset, this
could be late and can cause error handler to invoke.
If error handler invokes, eh_abort fails and escalate to
device/bus/host resets causing issues.
The commands need to be returned back to upper layer in
io_error_detected.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: Cleanup some dead-code and make some functions static.
Giridhar Malavali [Fri, 3 Sep 2010 22:20:52 +0000]
[SCSI] qla2xxx: Cleanup some dead-code and make some functions static.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: Return proper fabric name based on device state.
Giridhar Malavali [Fri, 3 Sep 2010 22:20:51 +0000]
[SCSI] qla2xxx: Return proper fabric name based on device state.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: Added AER support for ISP82xx.
Lalit Chandivade [Fri, 3 Sep 2010 22:20:50 +0000]
[SCSI] qla2xxx: Added AER support for ISP82xx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: Pass first 64 bytes of MBX information when vendor commands fail.
Giridhar Malavali [Fri, 3 Sep 2010 22:20:49 +0000]
[SCSI] qla2xxx: Pass first 64 bytes of MBX information when vendor commands fail.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: Don't issue set or get port param MBC if port is not online.
Giridhar Malavali [Fri, 3 Sep 2010 22:20:48 +0000]
[SCSI] qla2xxx: Don't issue set or get port param MBC if port is not online.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] scsi/block: increase flush/sync timeout
Mike Christie [Wed, 11 Aug 2010 16:06:25 +0000]
[SCSI] scsi/block: increase flush/sync timeout

We have been seeing the flush request timeout with a wide
range of hardware from tgt+iser to FC targets from a major vendor.

After discussions about if the value should be configurable and
what the best value should be, this patch just increases the flush/sync
cache timeout to 1 minute. 2 minutes was determined to be too long, and
making it configurable was troublesome for users.

This patch was made over Linus's tree. It is not made over scsi-misc
or scsi-rc-fixes, because Linus's had block layer changes that my
patch was built over.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] drivers/message/fusion: Return -ENOMEM on memory allocation failure
Julia Lawall [Wed, 11 Aug 2010 10:11:24 +0000]
[SCSI] drivers/message/fusion: Return -ENOMEM on memory allocation failure

In this code, 0 is returned on memory allocation failure, even though other
failures return -ENOMEM or other similar values.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ret;
expression x,e1,e2,e3;
@@

ret = 0
... when != ret = e1
*x = \(kmalloc\|kcalloc\|kzalloc\)(...)
... when != ret = e2
if (x == NULL) { ... when != ret = e3
  return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] bnx2i: Updated version to bnx2i-2.1.3
Eddie Wai [Thu, 12 Aug 2010 23:44:31 +0000]
[SCSI] bnx2i: Updated version to bnx2i-2.1.3

Also updated maintainer info.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] bnx2i: Added chip cleanup for the remove module path
Eddie Wai [Thu, 12 Aug 2010 23:44:30 +0000]
[SCSI] bnx2i: Added chip cleanup for the remove module path

In the case when an ep_connect request is interrupted due to route
request stall, if the iSCSI daemon is terminated by the user, the chip
will be left in a state which will not get cleaned up upon module
removal.  Upon module reload, when the same context id is used for a
new connection, chip panic would occur.

This patch adds chip cleanup in the module removal path.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Acked-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] bnx2i: Recouple the CFC delete cleanup with cm_abort/close completion
Eddie Wai [Thu, 12 Aug 2010 23:44:29 +0000]
[SCSI] bnx2i: Recouple the CFC delete cleanup with cm_abort/close completion

Specific to the Broadcom 10g chipset, the CFC delete operation must be
coupled with the cm_abort/close with does the SRC delete/terminate offload
operation prior.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Acked-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] bxn2i: Added support for other TMFs besides ABORT_TASK
Eddie Wai [Fri, 13 Aug 2010 16:33:27 +0000]
[SCSI] bxn2i: Added support for other TMFs besides ABORT_TASK

Expanded the TMF request routine to support other TMFs such as LUN
RESET, etc.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] bnx2i: Fixed a protocol violation on nopout responses
Eddie Wai [Thu, 12 Aug 2010 23:44:27 +0000]
[SCSI] bnx2i: Fixed a protocol violation on nopout responses

According to RFC3720, nopout packet sent in response to unsolicited
nopin packet requesting a response must retain the TTT of the requester.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] ipr: Driver version 2.5.1
Wayne Boyer [Tue, 10 Aug 2010 16:13:00 +0000]
[SCSI] ipr: Driver version 2.5.1

Bump the driver version.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] ipr: fix resource address formatting and add attribute for device ID
Wayne Boyer [Wed, 11 Aug 2010 14:15:17 +0000]
[SCSI] ipr: fix resource address formatting and add attribute for device ID

This patch fixes a resource address formatting problem where the first byte
was being zeroed out.

Also, the device ID is now made available as a sysfs attribute.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] cxgb3i: change cxgb3i to use libcxgbi
kxie@chelsio.com [Tue, 17 Aug 2010 03:55:53 +0000]
[SCSI] cxgb3i: change cxgb3i to use libcxgbi

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] cxgb4i v5: iscsi driver
kxie@chelsio.com [Tue, 17 Aug 2010 03:55:53 +0000]
[SCSI] cxgb4i v5: iscsi driver

Added cxgb4i iSCSI driver.

This patch implements the cxgb4i iscsi connection acceleration for the
open-iscsi initiator.

The cxgb4i driver offers the iscsi PDU based offload:
- digest insertion and verification
- payload direct-placement into host memory buffer.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] libcxgbi: common library for cxgb3i and cxgb4i
kxie@chelsio.com [Tue, 17 Aug 2010 03:55:53 +0000]
[SCSI] libcxgbi: common library for cxgb3i and cxgb4i

[PATCH v5 1/3] libcxgbi: common library for cxgb3i and cxgb4i

From: Karen Xie <kxie@chelsio.com>

Extracts common functions to libcxgbi.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] lpfc: change spin_lock_irq() to spin_lock()
Dan Carpenter [Sat, 7 Aug 2010 22:15:17 +0000]
[SCSI] lpfc: change spin_lock_irq() to spin_lock()

In lpfc_cleanup_pending_mbox() we already have IRQs disabled so we don't
need to disable them again.

Also in lpfc_sli_intr_handler() there is a typo where it has
spin_unlock_irq() instead of just spin_unlock().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] drivers/scsi: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 20:19:36 +0000]
[SCSI] drivers/scsi: Adjust confusing if indentation

Outdent the code following the if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Nick Cheng <nick.cheng@areca.com.tw>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] ibmvfc: do not reset dev_loss_tmo in slave callout
Mike Christie [Fri, 6 Aug 2010 08:02:41 +0000]
[SCSI] ibmvfc: do not reset dev_loss_tmo in slave callout

This fixes a bug where the driver was resetting the
rport dev_loss_tmo when devices were added by adding
support for the get_host_def_dev_loss_tmo callout.

Patch has only been compile tested.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] fnic: do not reset dev_loss_tmo in slave callout
Mike Christie [Fri, 6 Aug 2010 08:02:40 +0000]
[SCSI] fnic: do not reset dev_loss_tmo in slave callout

This fixes a bug where the driver was resetting the
rport dev_loss_tmo when devices were added by adding
support for the get_host_def_dev_loss_tmo callout.

Patch has only been compile tested.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] lpfc: do not reset dev_loss_tmo in slave callout
Mike Christie [Fri, 6 Aug 2010 08:02:39 +0000]
[SCSI] lpfc: do not reset dev_loss_tmo in slave callout

This fixes a bug where the driver was resetting the
rport dev_loss_tmo when devices were added by adding
support for the get_host_def_dev_loss_tmo callout.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] qla2xxx: do not reset dev_loss_tmo in slave callout
Mike Christie [Fri, 6 Aug 2010 08:02:38 +0000]
[SCSI] qla2xxx: do not reset dev_loss_tmo in slave callout

This fixes a bug where the driver was resetting the
rport dev_loss_tmo when devices were added by adding
support for the get_host_def_dev_loss_tmo callout.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years ago[SCSI] fc class: add fc host default default dev loss setting
Mike Christie [Fri, 6 Aug 2010 08:02:37 +0000]
[SCSI] fc class: add fc host default default dev loss setting

This patch adds a fc_host setting to store the
default dev_loss_tmo. It is used if the driver
has a callack to get the value from the LLD. If
the callback is not set, then we use the fc class
module default value.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

10 years agoLinux 2.6.36-rc3
Linus Torvalds [Sun, 29 Aug 2010 15:36:04 +0000]
Linux 2.6.36-rc3

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Sun, 29 Aug 2010 15:19:02 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: work around VIA and NEC PHY packet reception bug
  firewire: core: do not use del_timer_sync() in interrupt context
  firewire: net: fix unicast reception RCODE in failure paths
  firewire: sbp2: fix stall with "Unsolicited response"
  firewire: sbp2: fix memory leak in sbp2_cancel_orbs or at send error
  ieee1394: Adjust confusing if indentation

10 years agofirewire: ohci: work around VIA and NEC PHY packet reception bug
Stefan Richter [Sat, 28 Aug 2010 12:21:26 +0000]
firewire: ohci: work around VIA and NEC PHY packet reception bug

VIA VT6306, VIA VT6308, and NEC OrangeLink controllers do not write
packet event codes for received PHY packets (or perhaps write
evt_no_status, hard to tell).  Work around it by overwriting the
packet's ACK by ack_complete, so that upper layers that listen to PHY
packet reception get to see these packets.

(Also tested:  TI TSB82AA2, TI TSB43AB22/A, TI XIO2213A, Agere FW643,
JMicron JMB381 --- these do not exhibit this bug.)

Clemens proposed a quirks flag for that, IOW whitelist known misbehaving
controllers for this workaround.  Though to me it seems harmless enough
to enable for all controllers.

The log_ar_at_event() debug log will continue to show the original
status from the DMA unit.

Reported-by: Clemens Ladisch <clemens@ladisch.de> (VT6308)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 28 Aug 2010 22:42:44 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net/ipv4: Eliminate kstrdup memory leak
  net/caif/cfrfml.c: use asm/unaligned.h
  ax25: missplaced sock_put(sk)
  qlge: reset the chip before freeing the buffers
  l2tp: test for ethernet header in l2tp_eth_dev_recv()
  tcp: select(writefds) don't hang up when a peer close connection
  tcp: fix three tcp sysctls tuning
  tcp: Combat per-cpu skew in orphan tests.
  pxa168_eth: silence gcc warnings
  pxa168_eth: update call to phy_mii_ioctl()
  pxa168_eth: fix error handling in prope
  pxa168_eth: remove unneeded null check
  phylib: Fix race between returning phydev and calling adjust_link
  caif-driver: add HAS_DMA dependency
  3c59x: Fix deadlock between boomerang_interrupt and boomerang_start_tx
  qlcnic: fix poll implementation
  netxen: fix poll implementation
  bridge: netfilter: fix a memory leak

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier...
Linus Torvalds [Sat, 28 Aug 2010 21:24:49 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: bf52x/bf54x boards: drop unused nand page size
  Blackfin: punt duplicate SPORT MMR defines

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sat, 28 Aug 2010 21:24:34 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: pcm: add more format names
  sound: oss: fix uninitialized spinlock
  ALSA: asihpi - Return hw error directly from oustream_write.
  ASoC: soc-core: fix debugfs_pop_time file permissions
  ALSA: hda - Add Sony VAIO quirk for ALC269

10 years agoMerge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 28 Aug 2010 21:12:05 +0000]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV310: Fix on Secondary CPU startup
  ARM: S5PV310: Bug fix on uclk1 and sclk_pwm
  ARM: S5PV310: Fix missed uart clocks
  ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apll
  ARM: S5PV310: Fix on PLL setting for S5PV310
  ARM: S5PV310: Add CMU block for S5PV310 Clock
  ARM: S5PV310: Fix on typo irqs.h of S5PV310
  ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310
  ARM: S5PV310: Fix on GPIO base addresses
  ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END type
  ARM: S5P: VMALLOC_END should be unsigned long

10 years agoMerge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
Linus Torvalds [Sat, 28 Aug 2010 21:11:04 +0000]
Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify

* 'for-linus' of git://git.infradead.org/users/eparis/notify:
  fsnotify: drop two useless bools in the fnsotify main loop
  fsnotify: fix list walk order
  fanotify: Return EPERM when a process is not privileged
  fanotify: resize pid and reorder structure
  fanotify: drop duplicate pr_debug statement
  fanotify: flush outstanding perm requests on group destroy
  fsnotify: fix ignored mask handling between inode and vfsmount marks
  fanotify: add MAINTAINERS entry
  fsnotify: reset used_inode and used_vfsmount on each pass
  fanotify: do not dereference inode_mark when it is unset

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs...
Linus Torvalds [Sat, 28 Aug 2010 21:10:43 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Fix encrypted file name lookup regression
  ecryptfs: properly mark init functions
  fs/ecryptfs: Return -ENOMEM on memory allocation failure

10 years agoMerge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra
Linus Torvalds [Sat, 28 Aug 2010 21:09:16 +0000]
Merge branch 'for-linus' of git://android.git./kernel/tegra

* 'for-linus' of git://android.git.kernel.org/kernel/tegra:
  arm: tegra: VMALLOC_END should be unsigned long
  arm: tegra: fix compilation of board-harmony.c

10 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Sat, 28 Aug 2010 21:08:38 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  vgaarb: Wrap vga_(get|put) in CONFIG_VGA_ARB
  drm/radeon/kms: add missing scratch update in dp_detect
  drm/modes: Fix CVT-R modeline generation
  drm: fix regression in drm locking since BKL removal.
  drm/radeon/kms: remove stray radeon_i2c_destroy
  drm: mm: fix range restricted allocations
  drm/nouveau: drop drm_global_mutex before sleeping in submission path
  drm: export drm_global_mutex for drivers to use
  drm/nv20: Don't use pushbuf calls on the original nv20.
  drm/nouveau: Fix TMDS on some DCB1.5 boards.
  drm/nouveau: Fix backlight control on PPC machines with an internal TMDS panel.
  drm/nv30: Apply modesetting to the correct slave encoder
  drm/nouveau: Use a helper function to match PCI device/subsystem IDs.
  drm/nv50: add dcb type 14 to enum to prevent compiler complaint

10 years agoMerge branch 'lguest' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux...
Linus Torvalds [Sat, 28 Aug 2010 21:08:10 +0000]
Merge branch 'lguest' of git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* 'lguest' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: Odd Fixes
  lguest: clean up warnings in demonstration launcher.

10 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 28 Aug 2010 21:07:38 +0000]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP3: PM: ensure IO wakeups are properly disabled
  omap: Fix omap_4430sdp_defconfig for make oldconfig
  omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirq
  omap: Fix sev instruction usage for multi-omap
  OMAP3: Fix a cpu type check problem
  omap3: id: fix 3630 rev detection

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Sat, 28 Aug 2010 21:07:20 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix get_ticket_handler() error handling
  ceph: don't BUG on ENOMEM during mds reconnect
  ceph: ceph_mdsc_build_path() returns an ERR_PTR
  ceph: Fix warnings
  ceph: ceph_get_inode() returns an ERR_PTR
  ceph: initialize fields on new dentry_infos
  ceph: maintain i_head_snapc when any caps are dirty, not just for data
  ceph: fix osd request lru adjustment when sending request
  ceph: don't improperly set dir complete when holding EXCL cap
  mm: exporting account_page_dirty
  ceph: direct requests in snapped namespace based on nonsnap parent
  ceph: queue cap snap writeback for realm children on snap update
  ceph: include dirty xattrs state in snapped caps
  ceph: fix xattr cap writeback
  ceph: fix multiple mds session shutdown

10 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspe...
Linus Torvalds [Sat, 28 Aug 2010 21:06:19 +0000]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM QoS: Fix inline documentation.
  PM QoS: Fix kzalloc() parameters swapped in pm_qos_power_open()

10 years agoMerge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Sat, 28 Aug 2010 21:05:55 +0000]
Merge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
  nfsd: fix NULL dereference in nfsd_statfs()
  nfsd4: fix downgrade/lock logic
  nfsd4: typo fix in find_any_file
  nfsd4: bad BUG() in preprocess_stateid_op

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Sat, 28 Aug 2010 21:05:15 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  Cannot allocate memory error on mount
  [CIFS] Eliminate unused variable warning

10 years agoAlpha: Fix a missing comma in sys_osf_statfs()
David Howells [Thu, 26 Aug 2010 16:44:35 +0000]
Alpha: Fix a missing comma in sys_osf_statfs()

Fix a comma that got accidentally deleted from sys_osf_statfs() leading to the
following warning:

  arch/alpha/kernel/osf_sys.c: In function 'SYSC_osf_statfs':
  arch/alpha/kernel/osf_sys.c:255: error: syntax error before 'buffer'

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoNOMMU: Stub out vm_get_page_prot() if there's no MMU
David Howells [Thu, 26 Aug 2010 15:00:34 +0000]
NOMMU: Stub out vm_get_page_prot() if there's no MMU

Stub out vm_get_page_prot() if there's no MMU.

This was added by commit 804af2cf6e7a ("[AGPGART] remove private page
protection map") and is used in commit c07fbfd17e61 ("fbmem: VM_IO set,
but not propagated") in the fbmem video driver, but the function doesn't
exist on NOMMU, resulting in an undefined symbol at link time.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Linus Torvalds [Sat, 28 Aug 2010 20:55:54 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Do not report error overflow as a separate error
  MCE, AMD: Limit MCE decoding to current families for now

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 28 Aug 2010 20:55:31 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove()
  Input: mousedev - fix regression of inverting axes
  Input: uinput - add devname alias to allow module on-demand load
  Input: hil_kbd - fix compile error
  USB: drop tty argument from usb_serial_handle_sysrq_char()
  Input: sysrq - drop tty argument form handle_sysrq()
  Input: sysrq - drop tty argument from sysrq ops handlers

10 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Sat, 28 Aug 2010 20:54:55 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata-sff: remove harmful BUG_ON from ata_bmdma_qc_issue
  sata_mv: fix broken DSM/TRIM support (v2)
  libata: be less of a drama queen on empty data commands
  [libata] sata_dwc_460ex: signdness bug
  ahci: add HFLAG_YES_FBS and apply it to 88SE9128
  libata: remove no longer needed pata_winbond driver
  pata_cmd64x: revert commit d62f5576

10 years agomm: fix hang on anon_vma->root->lock
Hugh Dickins [Thu, 26 Aug 2010 06:12:54 +0000]
mm: fix hang on anon_vma->root->lock

After several hours, kbuild tests hang with anon_vma_prepare() spinning on
a newly allocated anon_vma's lock - on a box with CONFIG_TREE_PREEMPT_RCU=y
(which makes this very much more likely, but it could happen without).

The ever-subtle page_lock_anon_vma() now needs a further twist: since
anon_vma_prepare() and anon_vma_fork() are liable to change the ->root
of a reused anon_vma structure at any moment, page_lock_anon_vma()
needs to check page_mapped() again before succeeding, otherwise
page_unlock_anon_vma() might address a different root->lock.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sat, 28 Aug 2010 19:44:15 +0000]
Merge branch 'fix/asoc' into for-linus

10 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Sat, 28 Aug 2010 19:44:12 +0000]
Merge branch 'fix/hda' into for-linus

10 years agoALSA: pcm: add more format names
Dan Carpenter [Fri, 27 Aug 2010 20:02:15 +0000]
ALSA: pcm: add more format names

There were some new formats added in commit 15c0cee6c809 "ALSA: pcm:
Define G723 3-bit and 5-bit formats".  That commit increased
SNDRV_PCM_FORMAT_LAST as well.  My concern is that there are a couple
places which do:

        for (i = 0; i < SNDRV_PCM_FORMAT_LAST; i++) {
                if (dummy->pcm_hw.formats & (1ULL << i))
                        snd_iprintf(buffer, " %s", snd_pcm_format_name(i));
        }

I haven't tested these but it looks like if "i" were equal to
SNDRV_PCM_FORMAT_G723_24 or higher then we might read past the end of
the array.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agosound: oss: fix uninitialized spinlock
Akinobu Mita [Sat, 28 Aug 2010 04:25:33 +0000]
sound: oss: fix uninitialized spinlock

The spinlock lock in sound_timer.c is used without initialization.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoALSA: asihpi - Return hw error directly from oustream_write.
Eliot Blennerhassett [Sat, 28 Aug 2010 07:52:24 +0000]
ALSA: asihpi - Return hw error directly from oustream_write.

If hw error is ignored, status is updated with invalid info.

Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agonet/ipv4: Eliminate kstrdup memory leak
Julia Lawall [Sat, 28 Aug 2010 02:31:56 +0000]
net/ipv4: Eliminate kstrdup memory leak

The string clone is only used as a temporary copy of the argument val
within the while loop, and so it should be freed before leaving the
function.  The call to strsep, however, modifies clone, so a pointer to the
front of the string is kept in saved_clone, to make it possible to free it.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E;
identifier l;
statement S;
@@

*x= \(kasprintf\|kstrdup\)(...);
...
if (x == NULL) S
... when != kfree(x)
    when != E = x
if (...) {
  <... when != kfree(x)
* goto l;
  ...>
* return ...;
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agofsnotify: drop two useless bools in the fnsotify main loop
Eric Paris [Sat, 28 Aug 2010 01:42:11 +0000]
fsnotify: drop two useless bools in the fnsotify main loop

The fsnotify main loop has 2 bools which indicated if we processed the
inode or vfsmount mark in that particular pass through the loop.  These
bool can we replaced with the inode_group and vfsmount_group variables
and actually make the code a little easier to understand.

Signed-off-by: Eric Paris <eparis@redhat.com>

10 years agofsnotify: fix list walk order
Eric Paris [Sat, 28 Aug 2010 01:24:24 +0000]
fsnotify: fix list walk order

Marks were stored on the inode and vfsmonut mark list in order from
highest memory address to lowest memory address.  The code to walk those
lists thought they were in order from lowest to highest with
unpredictable results when trying to match up marks from each.  It was
possible that extra events would be sent to userspace when inode
marks ignoring events wouldn't get matched with the vfsmount marks.

This problem only affected fanotify when using both vfsmount and inode
marks simultaneously.

Signed-off-by: Eric Paris <eparis@redhat.com>

10 years agofanotify: Return EPERM when a process is not privileged
Andreas Gruenbacher [Tue, 24 Aug 2010 10:58:54 +0000]
fanotify: Return EPERM when a process is not privileged

The appropriate error code when privileged operations are denied is
EPERM, not EACCES.

Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <paris@paris.rdu.redhat.com>

10 years agofanotify: resize pid and reorder structure
Tvrtko Ursulin [Fri, 20 Aug 2010 09:02:15 +0000]
fanotify: resize pid and reorder structure

resize pid and reorder the fanotify_event_metadata so it is naturally
aligned and we can work towards dropping the packed attributed

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com>
Cc: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Eric Paris <eparis@redhat.com>

10 years agoBlackfin: bf52x/bf54x boards: drop unused nand page size
Barry Song [Wed, 2 Jun 2010 04:22:11 +0000]
Blackfin: bf52x/bf54x boards: drop unused nand page size

Now that the driver for the Blackfin on-chip NFC no longer uses/respects
the page_size from the platform resources (figures out the needs on the
fly), drop it from the platform resources.  This fixes some build errors
since the defines no longer exists.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: punt duplicate SPORT MMR defines
Mike Frysinger [Tue, 17 Nov 2009 15:40:30 +0000]
Blackfin: punt duplicate SPORT MMR defines

The common bfin_sport.h header now has unified definitions of these, so
stop polluting the global namespace.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>