13 years agoPCI: constify function pointer tables
Jan Engelhardt [Tue, 22 Jan 2008 19:53:43 +0000]
PCI: constify function pointer tables

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Convert drivers/pci/proc.c to use unlocked_ioctl
Mathieu Segaud [Thu, 10 Jan 2008 13:27:12 +0000]
PCI: Convert drivers/pci/proc.c to use unlocked_ioctl

Change access to inode thru file->f_dentry->d_inode, and add explicit
lock/unlock_kernel() calls.

Signed-off-by: Mathieu Segaud <mathieu.segaud@regala.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agopciehp: block new requests from the device before power off
Kenji Kaneshige [Thu, 20 Dec 2007 10:46:33 +0000]
pciehp: block new requests from the device before power off

Disable Bus Master, SERR# and INTx to ensure that no new Requests will
be generated from the device before turning power off, in accordance
with the specification.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agopciehp: workaround against Bad DLLP during power off
Kenji Kaneshige [Thu, 20 Dec 2007 10:45:09 +0000]
pciehp: workaround against Bad DLLP during power off

Set Bad DLLP Mask bit in Correctable Error Mask Register during
turning power off the slot.

This is the workaround against Bad DLLP error that sometimes happen
during turning power off on the slot which conforms to PCI Express
1.0a spec. The cause of this error seems that PCI Express 1.0a spec
doesn't have the following consideration that was added to PCI Express
1.1 spec.

    "If the port is associated with a hot-pluggable slot (Hot-Plug
    Capable bit in the Slot Capabilities register set to 1b), and
    Power Controller Control bit in Slot Control register is 1b(Off),
    then any transition to DL Inactive must not be considered an
    error."

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agopciehp: wait for 1000ms before LED operation after power off
Kenji Kaneshige [Thu, 20 Dec 2007 10:43:56 +0000]
pciehp: wait for 1000ms before LED operation after power off

After turning power off, we must wait for at least 1 second *before*
LED operation.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Remove pci_enable_device_bars() from documentation
Grant Grundler [Mon, 24 Dec 2007 07:08:51 +0000]
PCI: Remove pci_enable_device_bars() from documentation

Patch below removes pci_enable_device_bars() from Documentation/pci.txt .

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Remove pci_enable_device_bars()
Benjamin Herrenschmidt [Thu, 20 Dec 2007 04:28:10 +0000]
PCI: Remove pci_enable_device_bars()

Now that all in-tree users are gone, this removes pci_enable_device_bars()
completely.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Remove users of pci_enable_device_bars()
Benjamin Herrenschmidt [Thu, 20 Dec 2007 04:28:09 +0000]
PCI: Remove users of pci_enable_device_bars()

This patch converts users of pci_enable_device_bars() to the new
pci_enable_device_{io,mem} interface.

The new API fits nicely, except maybe for the QLA case where a bit of
code re-organization might be a good idea but I prefer sticking to the
simple patch as I don't have hardware to test on.

I'll also need some feedback on the cs5520 change.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Add pci_enable_device_{io,mem} intefaces
Benjamin Herrenschmidt [Thu, 20 Dec 2007 04:28:08 +0000]
PCI: Add pci_enable_device_{io,mem} intefaces

The pci_enable_device_bars() interface isn't well suited to PCI
because you can't actually enable/disable BARs individually on
a device. So for example, if a device has 2 memory BARs 0 and 1,
and one of them (let's say 1) has not been successfully allocated
by the firmware or the kernel, then enabling memory decoding
shouldn't be permitted for the entire device since it will decode
whatever random address is still in that BAR 1.

So a device must be either fully enabled for IO, for Memory, or
for both. Not on a per-BAR basis.

This provides two new functions, pci_enable_device_io() and
pci_enable_device_mem() to replace pci_enable_device_bars(). The
implementation internally builds a BAR mask in order to be able
to use existing arch infrastructure.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: avoid save the same type of cap multiple times
Shaohua Li [Tue, 18 Dec 2007 01:57:09 +0000]
PCI: avoid save the same type of cap multiple times

Avoid adding the same type of cap multiple times, otherwise we will see dead loop.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: correctly initialize a structure for pcie_save_pcix_state()
Shaohua Li [Tue, 18 Dec 2007 01:56:56 +0000]
PCI: correctly initialize a structure for pcie_save_pcix_state()

save_state->cap_nr should be correctly set, otherwise we can't find the
saved cap at resume.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: fix typo in pci_save_pcix_state
Shaohua Li [Tue, 18 Dec 2007 01:56:47 +0000]
PCI: fix typo in pci_save_pcix_state

pci_save/store_state has multiple bugs, which will cause cap can't be
saved/restored correctly. Below 3 patches fix them.

fix the typo in pci_save_pcix_state

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: use dev_printk in x86 quirk messages
bjorn.helgaas@hp.com [Mon, 17 Dec 2007 21:09:40 +0000]
PCI: use dev_printk in x86 quirk messages

Convert quirk printks to dev_printk().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: use dev_printk in quirk messages
bjorn.helgaas@hp.com [Mon, 17 Dec 2007 21:09:39 +0000]
PCI: use dev_printk in quirk messages

Convert quirk printks to dev_printk().

I made the MSI disable messages a little more consistent:

    - always use "disabled", not "deactivated"
    - specify "device MSI disabled" or "subordinate MSI disabled" when
      disabling MSI for only a specific device or subordinate bus

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: print quirk name in debug messages
bjorn.helgaas@hp.com [Mon, 17 Dec 2007 21:09:38 +0000]
PCI: print quirk name in debug messages

Instead of printing this:

    PCI: Calling quirk c023b250 for 0000:00:00.0

we can print this:

    pci 0000:00:00.0: calling quirk 0xc023b270: quirk_cardbus_legacy+0x0/0x30()

The address is superfluous because sprint_symbol() includes the
address if the symbol lookup fails, but this is the same style used
in do_initcalls() and pnp_fixup_device().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: fix for quirk_e100_interrupt()
Ivan Kokshaysky [Mon, 17 Dec 2007 21:39:27 +0000]
PCI: fix for quirk_e100_interrupt()

Check that the e100 is in the D0 power state. If it's not, it won't
respond to MMIO accesses and we end up with master-abort machine
checks on some platforms.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Spelling fixes
Joe Perches [Mon, 17 Dec 2007 19:40:11 +0000]
PCI: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Kconfig help: don't refer to the PCI-HOWTO
Adrian Bunk [Thu, 13 Dec 2007 18:45:17 +0000]
PCI: Kconfig help: don't refer to the PCI-HOWTO

A HOWTO that hasn't been updated for half a dozen years no longer
"contains valuable information about which PCI hardware does work under
Linux and which doesn't".

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: drivers/pci/msi.c: move arch hooks to the top
Adrian Bunk [Tue, 11 Dec 2007 22:19:41 +0000]
PCI: drivers/pci/msi.c: move arch hooks to the top

This patch fixes the following problem present with older gcc versions:

<--  snip  -->

...
CC drivers/pci/msi.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/pci/msi.c:692: warning: weak declaration of `arch_msi_check_device' after first use results in unspecified behavior
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/pci/msi.c:704: warning: weak declaration of `arch_setup_msi_irqs' after first use results in unspecified behavior
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/pci/msi.c:724: warning: weak declaration of `arch_teardown_msi_irqs' after first use results in unspecified behavior
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: quirk: enable MSI Mapping on HT1000
Sebastien Dugue [Fri, 14 Dec 2007 00:09:25 +0000]
PCI: quirk: enable MSI Mapping on HT1000

Add a quirk to enable the MSI mapping capability on HyperTransport bridges.

Wire Broadcom's HT1000 to use the quirk.

Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Currid <acurrid@nvidia.com>
Cc: Peer Chen <pchen@nvidia.com>
Cc: Prakash Punnoor <prakash@punnoor.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michael Chan <mchan@broadcom.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andy Currid <acurrid@nvidia.com>
Cc: Peer Chen <pchen@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Fix warning in setup-res.c on 32-bit platforms with 64-bit resources
Benjamin Herrenschmidt [Mon, 10 Dec 2007 06:32:16 +0000]
PCI: Fix warning in setup-res.c on 32-bit platforms with 64-bit resources

This adds appropriate casts to avoid a warning and print the correct
values in pr_debug.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Fix bus resource assignment on 32 bits with 64b resources
Benjamin Herrenschmidt [Mon, 10 Dec 2007 06:32:15 +0000]
PCI: Fix bus resource assignment on 32 bits with 64b resources

The current pci_assign_unassigned_resources() code doesn't work properly
on 32 bits platforms with 64 bits resources. The main reason is the use
of unsigned long in various places instead of resource_size_t.

This is a pre-requisite for making powerpc use the generic code instead of
its own half-useful implementation.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI Hotplug: PCIeHP: Fix some whitespace damage
Rolf Eike Beer [Tue, 6 Nov 2007 12:20:17 +0000]
PCI Hotplug: PCIeHP: Fix some whitespace damage

PCIeHP: Fix some whitespace damage

Signed-off-by: Rolf Eike Beer <eike-hotplug@sf-tec.de>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI Hotplug: pciehp: use generic function to find ext capability
Kenji Kaneshige [Fri, 9 Nov 2007 08:28:11 +0000]
PCI Hotplug: pciehp: use generic function to find ext capability

Remove duplicated code to find an extend capability in PCIEHP driver.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI Hotplug: pciehp: remove needless hp_slot calculation
Kenji Kaneshige [Fri, 9 Nov 2007 08:29:42 +0000]
PCI Hotplug: pciehp: remove needless hp_slot calculation

Remove needless hp_slot calculation. This has no functional changes.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI Hotplug: pciehp: remove needless members from struct controller
Kenji Kaneshige [Fri, 9 Nov 2007 08:30:29 +0000]
PCI Hotplug: pciehp: remove needless members from struct controller

Remove needless members from struct controller. This has no functional
changes.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI Hotplug: acpiphp: remove unneeded acpi_get_name function call
MUNEDA Takahiro [Fri, 9 Nov 2007 10:06:20 +0000]
PCI Hotplug: acpiphp: remove unneeded acpi_get_name function call

acpi_get_name() is called before and after dbg(). The latter is
useless and should be removed.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI Hotplug: acpiphp: fix trivial typos
MUNEDA Takahiro [Fri, 9 Nov 2007 10:07:02 +0000]
PCI Hotplug: acpiphp: fix trivial typos

fix trivial typos.

Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCIe: fix double initialization bug
Mark Lord [Wed, 21 Nov 2007 23:07:55 +0000]
PCIe: fix double initialization bug

Earlier patches to split out the hardware init for PCIe hotplug resulted in
some one-time initializations being redone on every resume cycle.  Eg.
irq/polling initialization.

This patch splits the hardware init into two parts, and separates the
one-time initializations from those so that they only ever get done once,
as intended.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCIE: Make use of the previously split out pcie_init_enable_events() function
Mark Lord [Wed, 28 Nov 2007 23:12:00 +0000]
PCIE: Make use of the previously split out pcie_init_enable_events() function

Make use of the previously split out pcie_init_enable_events() function
to reinitialize the hotplug hardware on resume from suspend, but only
when pciehp_force==1.  Otherwise behaviour is unmodified.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: more fixes for PCIe Hotplug so that it works with ExpressCard slots on Dell...
Mark Lord [Wed, 28 Nov 2007 23:11:46 +0000]
PCI: more fixes for PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1

Split out the hotplug hardware initialization code from pcie_init()
into pcie_init_enable_events(), without changing any functionality.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCIE: fix PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks...
Mark Lord [Wed, 28 Nov 2007 23:11:28 +0000]
PCIE: fix PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1.

Fix pciehp_probe() to deal with ExpressCard cards
that were inserted prior to the driver being loaded.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Add missing "space" in printk messages
Joe Perches [Tue, 20 Nov 2007 01:48:29 +0000]
PCI: Add missing "space" in printk messages

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: export pci_restore_msi_state()
Linas Vepstas [Wed, 7 Nov 2007 21:43:59 +0000]
PCI: export pci_restore_msi_state()

PCI error recovery usually involves the PCI adapter being reset.
If the device is using MSI, the reset will cause the MSI state
to be lost; the device driver needs to restore the MSI state.

The pci_restore_msi_state() routine is currently protected
by CONFIG_PM; remove this, and also export the symbol, so
that it can be used in a modle.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agopci hotplug: fix rpaphp directory naming
Linas Vepstas [Mon, 26 Nov 2007 07:51:37 +0000]
pci hotplug: fix rpaphp directory naming

Fix presentation of the slot number in the /sys/bus/pci/slots
directory to match that used in the majority of other drivers.

> Greg said:
> How is anyone supposed to write sane managability tools in the
> presence
> of such anarchy?
>
> > ~ # cat /sys/bus/pci/slots/0000:00:02.2/phy_location
> > U787A.001.DNZ00Z5-P1-C2
>
> Right.  This should look like:
>
> # cat /sys/bus/pci/slots/U787A.001.DNZ00Z5-P1-C2/address
> 0000:00:02

This patch implements exactly what you describe. Boot tested.
I assume you really mean it -- if so, then please review and
ack the patch !?

I have absolutely no clue if this breaks any existing IBM tools.
I'm pretty sure it doesn't ... but attention Mike Strosaker! does it?

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: <strosake@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Unhide the SMBus on the HP xw4100
Jean Delvare [Wed, 21 Nov 2007 17:29:06 +0000]
PCI: Unhide the SMBus on the HP xw4100

Unhide the SMBus on the HP xw4100. This gives access to a hardware
monitoring chip (ADT7463) and to the memory module SPD EEPROMs. I
checked that ACPI wasn't accessing the SMBus, so it should be safe.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: More Sanity checks for DMAR
Fenghua Yu [Wed, 21 Nov 2007 23:07:14 +0000]
PCI: More Sanity checks for DMAR

Add and changes a few sanity checks in dmar.c.

1.  The haw field in ACPI DMAR table in VT-d spec doesn't describe the
   range of haw.  But since DMA page size is 4KB in DMA remapping, haw
   should be at least 4KB.  The current VT-d code in dmar.c returns failure
   when haw==0.  This sanity check is not accurate and execution can pass
   when haw is less than one page size 4KB.  This patch changes the haw
   sanity check to validate if haw is less than 4KB.

2. Add dmar_rmrr_units verification.

3. Add parse_dmar_table() verification.

[akpm@linux-foundation.org: coding-style fixes]

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: mark gross <mgross@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: drivers/pci/quirks.c: coding-style cleanup
Andrew Morton [Wed, 21 Nov 2007 23:07:13 +0000]
PCI: drivers/pci/quirks.c: coding-style cleanup

Remove lots of space-before-) instances.  Perhaps these were a workaround for
problems in some long-dead cpp version.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: remove additional pci_scan_child_bus() prototype
Adrian Bunk [Wed, 21 Nov 2007 23:07:12 +0000]
PCI: remove additional pci_scan_child_bus() prototype

There's already a prototype for pci_scan_child_bus() at the correct place in
pci.h, so there's no reason for an additional one.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: always export pci_scan_single_device
Adrian Bunk [Wed, 21 Nov 2007 23:07:11 +0000]
PCI: always export pci_scan_single_device

This patch fixes the following build error with CONFIG_HOTPLUG=n:

  MODPOST 2137 modules
ERROR: "pci_scan_single_device" [drivers/edac/i82875p_edac.ko] undefined!

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: remove unneeded lock_kernel() in drivers/pci/syscall.c.
Diego Woitasen [Wed, 21 Nov 2007 23:07:08 +0000]
PCI: remove unneeded lock_kernel() in drivers/pci/syscall.c.

sys_pciconfig_{read,write}() are protected against PCI removal with the
reference count in struct pci_dev.  The concurrency of
pci_user_{read,write}_config_* functions are already protected by pci_lock
in drivers/pci/access.c.

Signed-off-by: Diego Woitasen <diego@woitasen.com.ar>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: get rid of pci_dev::{vendor,device}_compatible fields
Lennert Buytenhek [Wed, 21 Nov 2007 23:07:07 +0000]
PCI: get rid of pci_dev::{vendor,device}_compatible fields

The vendor_compatible and device_compatible fields in struct pci_dev aren't
used anywhere, and are somewhat pointless.  Assuming that these are
historical artifacts, remove them.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: Mem Policy: fix mempolicy usage in pci driver
Lee Schermerhorn [Wed, 21 Nov 2007 23:07:05 +0000]
PCI: Mem Policy: fix mempolicy usage in pci driver

In an attempt to ensure memory allocation from the local node, the pci
driver temporarily replaces the current task's memory policy with the
system default policy.  Trying to be a good citizen, the driver then call's
mpol_get() on the new policy.  When it's finished probing, it undoes the
'_get by calling mpol_free() [on the system default policy] and then
restores the current task's saved mempolicy.

A couple of issues here:

1) it's never necessary to set a task's mempolicy to the
   system default policy in order to get system default
   allocation behavior.  Simply set the current task's
   mempolicy to NULL and allocations will fall back to
   system default policy.

2) we should never [need to] call mpol_free() on the system
   default policy.  [I plan on trapping this with a VM_BUG_ON()
   in a subsequent patch.]

This patch removes the calls to mpol_get() and mpol_free()
and uses NULL for the temporary task mempolicy to effect
default allocation behavior.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: VIA CX700 quirk to disable PCI Bus Parking
Tim Yamin [Thu, 1 Nov 2007 23:14:54 +0000]
PCI: VIA CX700 quirk to disable PCI Bus Parking

PCI Bus Parking and PCI Master read caching on the VIA CX700 is buggy and
can lead to problems such as USB2.0 packet loss if a VT6212L controller
is on the PCI bus. It's disabled by default, but some BIOSes turn these
features on and this patch reverts the configuration to the safe defaults.

Signed-off-by: Tim Yamin <tim.yamin@zonbu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: quirk_vialatency: Omit reading pci revision ID
Auke Kok [Mon, 29 Oct 2007 21:55:02 +0000]
PCI: quirk_vialatency: Omit reading pci revision ID

Don't read the revision ID unnecessary since the PCI subsystem
fills this field in already.

Updated to fix a thinko bug in a previously sent patch.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: hotplug: Link fakephp last
Alex Chiang [Fri, 12 Oct 2007 23:20:33 +0000]
PCI: hotplug: Link fakephp last

Currently, fakephp will claim all devices; we really only want it
to claim those not in slots.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: hotplug: pci_hotplug_core whitespace fix
Alex Chiang [Fri, 12 Oct 2007 23:20:32 +0000]
PCI: hotplug: pci_hotplug_core whitespace fix

Remove superfluous space.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: hotplug: acpiphp: Remove unused variable from acpiphp
Alex Chiang [Fri, 12 Oct 2007 23:20:31 +0000]
PCI: hotplug: acpiphp: Remove unused variable from acpiphp

Remove unused variable from acpiphp.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: hotplug: remove Experimental
Kristen Carlson Accardi [Fri, 12 Oct 2007 23:20:30 +0000]
PCI: hotplug: remove Experimental

Remove EXPERIMENTAL from PCI Hot Plug.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: hotplug: Switch to pci_get_bus_and_slot
Joonwoo Park [Fri, 12 Oct 2007 23:20:29 +0000]
PCI: hotplug: Switch to pci_get_bus_and_slot

Thank you so much for your check & advise.
This time, I've tried on ibmphp_core.c, is it OK?

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agopcie: utilize pcie transaction pending bit
Shaohua Li [Wed, 24 Oct 2007 02:45:08 +0000]
pcie: utilize pcie transaction pending bit

PCIE has a mechanism to wait for Non-Posted request to complete. I think
pci_disable_device is a good place to do this.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agopcie port driver: correctly detect native PME feature
Shaohua Li [Wed, 24 Oct 2007 02:43:23 +0000]
pcie port driver: correctly detect native PME feature

Native PME is capability of root port or root complex event collector.
It's not determined by PCI PME capability.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: drivers/pci/: remove unused exports
Adrian Bunk [Sat, 27 Oct 2007 01:06:33 +0000]
PCI: drivers/pci/: remove unused exports

This patch removes the following unused exports:
- remove the following unused EXPORT_SYMBOL's:
 - pci-acpi.c: pci_osc_support_set
 - proc.c: pci_proc_detach_bus
- remove the following unused EXPORT_SYMBOL_GPL's:
  - bus.c: pci_walk_bus
  - probe.c: pci_create_bus
  - setup-res.c: pci_claim_resource

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: drivers/pci/rom.c: #if 0 two functions
Adrian Bunk [Sat, 27 Oct 2007 01:06:25 +0000]
PCI: drivers/pci/rom.c: #if 0 two functions

This patch #if 0's the following unused global functions:
- rom.c: pci_map_rom_copy()
- rom.c: pci_remove_rom()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoPCI: make pci_restore_bars() static
Adrian Bunk [Sat, 27 Oct 2007 01:06:22 +0000]
PCI: make pci_restore_bars() static

This patch makes the needlessly global pci_restore_bars() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 1 Feb 2008 10:48:45 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: kill swap_io_context()
  as-iosched: fix inconsistent ioc->lock context
  ide-cd: fix leftover data BUG
  block: make elevator lib checkpatch compliant
  cfq-iosched: make checkpatch compliant
  block: make core bits checkpatch compliant
  block: new end request handling interface should take unsigned byte counts
  unexport add_disk_randomness
  block/sunvdc.c:print_version() must be __devinit
  splice: always updated atime in direct splice

13 years agoblock: kill swap_io_context()
Jens Axboe [Fri, 1 Feb 2008 10:34:49 +0000]
block: kill swap_io_context()

It blindly copies everything in the io_context, including the lock.
That doesn't work so well for either lock ordering or lockdep.

There seems zero point in swapping io contexts on a request to request
merge, so the best point of action is to just remove it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

13 years agodocbook: rapidio: fix fatal filename error
Randy Dunlap [Fri, 1 Feb 2008 06:09:08 +0000]
docbook: rapidio: fix fatal filename error

Fix docbook fatal error (files were renamed):
docproc: linux-2.6.24-git9/arch/ppc/kernel/rio.c: No such file or directory

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agofix directory entry in arch-x86-Makefile
Steven Rostedt [Fri, 1 Feb 2008 05:13:58 +0000]
fix directory entry in arch-x86-Makefile

Doing a make randconfig I came across this error in the Makefile.

This patch makes a directory out of arch/x86/mach-default for
CONFIG_X86_RDC321X

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Fri, 1 Feb 2008 10:06:56 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix inconsistent .section usage in lib/
  [SPARC/SPARC64]: Fix usage of .section .sched.text in assembler code.

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 1 Feb 2008 10:06:29 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (173 commits)
  [NETNS]: Lookup in FIB semantic hashes taking into account the namespace.
  [NETNS]: Add a namespace mark to fib_info.
  [IPV4]: fib_sync_down rework.
  [NETNS]: Process interface address manipulation routines in the namespace.
  [IPV4]: Small style cleanup of the error path in rtm_to_ifaddr.
  [IPV4]: Fix memory leak on error path during FIB initialization.
  [NETFILTER]: Ipv6-related xt_hashlimit compilation fix.
  [NET_SCHED]: Add flow classifier
  [NET_SCHED]: sch_sfq: make internal queues visible as classes
  [NET_SCHED]: sch_sfq: add support for external classifiers
  [NET_SCHED]: Constify struct tcf_ext_map
  [BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes.
  [TCP]: Unexport sysctl_tcp_tso_win_divisor
  [IPV4]: Make struct ipv4_devconf static.
  [TR] net/802/tr.c: sysctl_tr_rif_timeout static
  [XFRM]: Fix statistics.
  [XFRM]: Remove unused exports.
  [PKT_SCHED] sch_teql.c: Duplicate IFF_BROADCAST in FMASK, remove 2nd.
  [BNX2]: Fix ASYM PAUSE advertisement for remote PHY.
  [IPV4] route cache: Introduce rt_genid for smooth cache invalidation
  ...

13 years agopasemi: Fix thinko in dma_direct_ops setup
Olof Johansson [Thu, 31 Jan 2008 23:50:02 +0000]
pasemi: Fix thinko in dma_direct_ops setup

[POWERPC] pasemi: Fix thinko in dma_direct_ops setup

The first patch will just fall through and still set dma_data to a bad
value, make it return directly instead.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: remove dead timer int pending code
Greg Ungerer [Fri, 1 Feb 2008 07:40:52 +0000]
m68knommu: remove dead timer int pending code

Remove all the dead timer interrupt checking functions for the ColdFire
CPU "timers" hardware that are not used after switching to GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: remove empty timer offset function for 68360
Greg Ungerer [Fri, 1 Feb 2008 07:40:49 +0000]
m68knommu: remove empty timer offset function for 68360

Switching to GENERIC_TIME means we no longer need the empty timer offset
function for the 68360 CPU.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: remove local gettimeofday code
Greg Ungerer [Fri, 1 Feb 2008 07:40:39 +0000]
m68knommu: remove local gettimeofday code

Remove unused local gettimeofday functions, now that we are using
GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: set config to use GENERIC_TIME
Greg Ungerer [Fri, 1 Feb 2008 07:40:30 +0000]
m68knommu: set config to use GENERIC_TIME

Switch m68knommu arch to using GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: switch ColdFire TIMER to use GENERIC_TIME
Greg Ungerer [Fri, 1 Feb 2008 07:40:26 +0000]
m68knommu: switch ColdFire TIMER to use GENERIC_TIME

Switch the ColdFire TIMER timer to use GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: switch ColdFire PIT timer to use GENERIC_TIME
Greg Ungerer [Fri, 1 Feb 2008 07:40:21 +0000]
m68knommu: switch ColdFire PIT timer to use GENERIC_TIME

Switch the ColdFire PIT timer to using GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: switch 68328 timer to use GENERIC_TIME
Greg Ungerer [Fri, 1 Feb 2008 07:40:17 +0000]
m68knommu: switch 68328 timer to use GENERIC_TIME

Switch the 68328 CPU timer code to using GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: remove unused CONFIG_DISKtel symbol
Greg Ungerer [Fri, 1 Feb 2008 07:38:26 +0000]
m68knommu: remove unused CONFIG_DISKtel symbol

Remove unused CONFIG_DISKtel define.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: fix 528x ColdFire cache settings
Greg Ungerer [Fri, 1 Feb 2008 07:38:24 +0000]
m68knommu: fix 528x ColdFire cache settings

Fix problems with the 528x ColdFire CPU cache setup.
Do not cache the flash region (if present), and make the runtime
settings consistent with the init setting.

Problems pointed out by Bernd Buttner <b.buettner@mkc-gmbh.de>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: use container_of in mcf.c
Greg Ungerer [Fri, 1 Feb 2008 07:38:34 +0000]
m68knommu: use container_of in mcf.c

Use container_of() instead of assuming local uart struct is first member
of uart_port struct.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: remove dead code from m68knommu timer code
Greg Ungerer [Fri, 1 Feb 2008 07:38:20 +0000]
m68knommu: remove dead code from m68knommu timer code

Remove unused LED heartbeat code from m68knommu timer code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: use IRQF_DISABLE in m68328serial.c
Greg Ungerer [Fri, 1 Feb 2008 07:38:32 +0000]
m68knommu: use IRQF_DISABLE in m68328serial.c

Use IRQF_DISABLED instead of obsolete IRQ_FLG_STD for request_irq() flags
in m68328serial.c driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: create common DMA table for ColdFire CPUs
Greg Ungerer [Fri, 1 Feb 2008 07:38:03 +0000]
m68knommu: create common DMA table for ColdFire CPUs

Move the ColdFire DMA address table into its own file, and out
of each of the different CPU config files. No need to have a copy
of it in each of the config setup files.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: modify Makefiles to support common coldfire directory
Greg Ungerer [Fri, 1 Feb 2008 07:37:56 +0000]
m68knommu: modify Makefiles to support common coldfire directory

Modify Makefiles to support separate coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: move ColdFire vectors.c to its own coldfire directory
Greg Ungerer [Fri, 1 Feb 2008 07:37:46 +0000]
m68knommu: move ColdFire vectors.c to its own coldfire directory

Move common ColdFire CPU vectors.c to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: move ColdFire timers.c to its own coldfire directory
Greg Ungerer [Fri, 1 Feb 2008 07:37:39 +0000]
m68knommu: move ColdFire timers.c to its own coldfire directory

Move common ColdFire CPU timers.c to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: move ColdFire pit.c to its own coldfire directory
Greg Ungerer [Fri, 1 Feb 2008 07:37:36 +0000]
m68knommu: move ColdFire pit.c to its own coldfire directory

Move common ColdFire CPU pit.c to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: move ColdFire head.S to its own coldfire directory
Greg Ungerer [Fri, 1 Feb 2008 07:37:28 +0000]
m68knommu: move ColdFire head.S to its own coldfire directory

Move common ColdFire CPU head.S to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: move ColdFire entry.S to its own coldfire directory
Greg Ungerer [Fri, 1 Feb 2008 07:37:18 +0000]
m68knommu: move ColdFire entry.S to its own coldfire directory

Move common ColdFire CPU entry.S to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 5407 ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:35:03 +0000]
m68knommu: platform setup for 5407 ColdFire parts

Switch to platform style configuration for 5407 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 532x ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:58 +0000]
m68knommu: platform setup for 532x ColdFire parts

Switch to platform style configuration for 532x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 527x ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:40 +0000]
m68knommu: platform setup for 527x ColdFire parts

Switch to platform style configuration for 527x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 5307 ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:55 +0000]
m68knommu: platform setup for 5307 ColdFire parts

Switch to platform style configuration for 5307 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 528x ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:50 +0000]
m68knommu: platform setup for 528x ColdFire parts

Switch to platform style configuration for 528x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 5249 ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:30 +0000]
m68knommu: platform setup for 5249 ColdFire parts

Switch to platform style configuration for 5249 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 5272 ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:32 +0000]
m68knommu: platform setup for 5272 ColdFire parts

Switch to platform style configuration for 5272 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 520x ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:10 +0000]
m68knommu: platform setup for 520x ColdFire parts

Switch to platform style configuration for 520x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 523x ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:15 +0000]
m68knommu: platform setup for 523x ColdFire parts

Switch to platform style configuration for 523x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 5206e ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:08 +0000]
m68knommu: platform setup for 5206e ColdFire parts

Switch to platform style configuration for 5206e ColdFire parts.
Initial support is for the UARTs. DMA support is moved to common code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: platform setup for 5206 ColdFire parts
Greg Ungerer [Fri, 1 Feb 2008 07:34:04 +0000]
m68knommu: platform setup for 5206 ColdFire parts

Switch to platform style configuration for 5206 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: configure support for new ColdFire serial driver
Greg Ungerer [Fri, 1 Feb 2008 07:32:00 +0000]
m68knommu: configure support for new ColdFire serial driver

Add configure support for new ColdFire serial driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68knommu: build support for new ColdFire serial driver
Greg Ungerer [Fri, 1 Feb 2008 07:31:58 +0000]
m68knommu: build support for new ColdFire serial driver

Add build support for new ColdFire serial driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoFix dl2k constants
Al Viro [Fri, 1 Feb 2008 07:05:44 +0000]
Fix dl2k constants

The MSSR constants didn't match the reality - bitfield declarations used
to be correct (1000BT_FD - bit 11, 1000BT_HD - bit 10), but enum had
them the other way round.  Went unnoticed until the switch from the
bitfields use to the explicit arithmetics and I hadn't caught that one
when verifying correctness of change...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoas-iosched: fix inconsistent ioc->lock context
Jens Axboe [Fri, 1 Feb 2008 08:44:28 +0000]
as-iosched: fix inconsistent ioc->lock context

Since it's acquired from irq context, all locking must be of the
irq safe variant. Most are already inside the queue lock (which
already disables interrupts), but the io scheduler rmmod path
always has irqs enabled and the put_io_context() path may legally
be called with irqs enabled (even if it isn't usually). So fixup
those two.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

13 years agoide-cd: fix leftover data BUG
Jens Axboe [Thu, 31 Jan 2008 12:57:51 +0000]
ide-cd: fix leftover data BUG

It's perfectly legal to have data leftovers when a drive signals
completion, it happens all the time when a user issues a command
with a transfer count that is too large.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

13 years agoblock: make elevator lib checkpatch compliant
Jens Axboe [Thu, 31 Jan 2008 23:37:27 +0000]
block: make elevator lib checkpatch compliant

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

13 years agocfq-iosched: make checkpatch compliant
Jens Axboe [Thu, 31 Jan 2008 12:08:54 +0000]
cfq-iosched: make checkpatch compliant

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

13 years agoblock: make core bits checkpatch compliant
Jens Axboe [Thu, 31 Jan 2008 12:03:55 +0000]
block: make core bits checkpatch compliant

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>