Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel
Russell King [Fri, 13 Mar 2009 21:44:51 +0000 (21:44 +0000)]
Conflicts:

arch/arm/mach-at91/gpio.c

1121 files changed:
CREDITS
Documentation/ABI/testing/sysfs-bus-pci
Documentation/ABI/testing/sysfs-firmware-memmap
Documentation/DocBook/Makefile
Documentation/DocBook/device-drivers.tmpl [new file with mode: 0644]
Documentation/DocBook/kernel-api.tmpl
Documentation/PCI/PCIEBUS-HOWTO.txt
Documentation/RCU/checklist.txt
Documentation/cgroups/cgroups.txt
Documentation/cgroups/cpusets.txt
Documentation/connector/cn_test.c
Documentation/cpu-freq/user-guide.txt
Documentation/driver-model/device.txt
Documentation/dvb/README.flexcop [deleted file]
Documentation/dvb/technisat.txt
Documentation/feature-removal-schedule.txt
Documentation/filesystems/squashfs.txt
Documentation/filesystems/sysfs-pci.txt
Documentation/filesystems/sysfs.txt
Documentation/hwmon/hpfall.c [new file with mode: 0644]
Documentation/hwmon/lis3lv02d
Documentation/kernel-doc-nano-HOWTO.txt
Documentation/kernel-parameters.txt
Documentation/networking/ipv6.txt [new file with mode: 0644]
Documentation/scsi/cxgb3i.txt
Documentation/tracers/mmiotrace.txt
MAINTAINERS
Makefile
README
arch/alpha/kernel/process.c
arch/alpha/kernel/smp.c
arch/arm/configs/at91sam9260ek_defconfig
arch/arm/configs/at91sam9261ek_defconfig
arch/arm/configs/at91sam9263ek_defconfig
arch/arm/configs/at91sam9rlek_defconfig
arch/arm/configs/qil-a9260_defconfig
arch/arm/kernel/elf.c
arch/arm/kernel/machine_kexec.c
arch/arm/kernel/setup.c
arch/arm/mach-at91/at91cap9_devices.c
arch/arm/mach-at91/at91sam9260_devices.c
arch/arm/mach-at91/at91sam9261_devices.c
arch/arm/mach-at91/at91sam9263_devices.c
arch/arm/mach-at91/at91sam9rl_devices.c
arch/arm/mach-at91/gpio.c
arch/arm/mach-at91/include/mach/board.h
arch/arm/mach-at91/pm.c
arch/arm/mach-davinci/board-evm.c
arch/arm/mach-davinci/clock.c
arch/arm/mach-davinci/usb.c
arch/arm/mach-ep93xx/include/mach/gesbc9312.h [deleted file]
arch/arm/mach-ep93xx/include/mach/hardware.h
arch/arm/mach-kirkwood/irq.c
arch/arm/mach-mv78xx0/irq.c
arch/arm/mach-mx1/Kconfig
arch/arm/mach-mx1/Makefile
arch/arm/mach-mx1/clock.c
arch/arm/mach-mx1/devices.c
arch/arm/mach-mx1/mx1ads.c
arch/arm/mach-mx1/scb9328.c [new file with mode: 0644]
arch/arm/mach-mx2/Kconfig
arch/arm/mach-mx2/Makefile
arch/arm/mach-mx2/Makefile.boot
arch/arm/mach-mx2/clock_imx21.c [new file with mode: 0644]
arch/arm/mach-mx2/clock_imx27.c
arch/arm/mach-mx2/cpu_imx27.c
arch/arm/mach-mx2/crm_regs.h
arch/arm/mach-mx2/devices.c
arch/arm/mach-mx2/devices.h
arch/arm/mach-mx2/generic.c
arch/arm/mach-mx2/mx27ads.c
arch/arm/mach-mx2/pcm038.c
arch/arm/mach-mx2/pcm970-baseboard.c
arch/arm/mach-mx2/serial.c
arch/arm/mach-mx3/Kconfig
arch/arm/mach-mx3/Makefile
arch/arm/mach-mx3/clock-imx35.c [new file with mode: 0644]
arch/arm/mach-mx3/clock.c
arch/arm/mach-mx3/crm_regs.h
arch/arm/mach-mx3/devices.c
arch/arm/mach-mx3/devices.h
arch/arm/mach-mx3/iomux.c
arch/arm/mach-mx3/mm.c
arch/arm/mach-mx3/mx31ads.c
arch/arm/mach-mx3/mx31lite.c
arch/arm/mach-mx3/mx31moboard-devboard.c [new file with mode: 0644]
arch/arm/mach-mx3/mx31moboard-marxbot.c [new file with mode: 0644]
arch/arm/mach-mx3/mx31moboard.c
arch/arm/mach-mx3/mx31pdk.c
arch/arm/mach-mx3/pcm037.c
arch/arm/mach-mx3/qong.c [new file with mode: 0644]
arch/arm/mach-omap2/board-ldp.c
arch/arm/mach-omap2/clock.c
arch/arm/mach-orion5x/irq.c
arch/arm/mach-rpc/riscpc.c
arch/arm/mm/Kconfig
arch/arm/mm/abort-ev6.S
arch/arm/mm/mmu.c
arch/arm/plat-mxc/Kconfig
arch/arm/plat-mxc/Makefile
arch/arm/plat-mxc/clock.c
arch/arm/plat-mxc/cpu.c [new file with mode: 0644]
arch/arm/plat-mxc/devices.c
arch/arm/plat-mxc/dma-mx1-mx2.c
arch/arm/plat-mxc/gpio.c
arch/arm/plat-mxc/include/mach/board-mx27ads.h
arch/arm/plat-mxc/include/mach/board-mx31ads.h
arch/arm/plat-mxc/include/mach/board-mx31moboard.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/board-qong.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/clkdev.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/clock.h
arch/arm/plat-mxc/include/mach/common.h
arch/arm/plat-mxc/include/mach/debug-macro.S
arch/arm/plat-mxc/include/mach/hardware.h
arch/arm/plat-mxc/include/mach/imxfb.h [moved from arch/arm/mach-imx/include/mach/imxfb.h with 96% similarity]
arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h [deleted file]
arch/arm/plat-mxc/include/mach/iomux-mx1.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/iomux-mx21.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/iomux-mx27.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/iomux-mx2x.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/iomux-mx3.h
arch/arm/plat-mxc/include/mach/iomux.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/memory.h
arch/arm/plat-mxc/include/mach/mx21.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/mx27.h
arch/arm/plat-mxc/include/mach/mx2x.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/mx31.h
arch/arm/plat-mxc/include/mach/mx35.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/mx3x.h [new file with mode: 0644]
arch/arm/plat-mxc/include/mach/mxc.h
arch/arm/plat-mxc/iomux-mx1-mx2.c
arch/arm/plat-mxc/pwm.c [new file with mode: 0644]
arch/arm/plat-mxc/time.c
arch/arm/plat-orion/gpio.c
arch/arm/plat-orion/include/plat/gpio.h
arch/arm/plat-s3c64xx/irq-eint.c
arch/avr32/mach-at32ap/include/mach/board.h
arch/blackfin/Kconfig
arch/blackfin/Kconfig.debug
arch/blackfin/configs/BF518F-EZBRD_defconfig
arch/blackfin/configs/BF527-EZKIT_defconfig
arch/blackfin/configs/BF533-EZKIT_defconfig
arch/blackfin/configs/BF533-STAMP_defconfig
arch/blackfin/configs/BF537-STAMP_defconfig
arch/blackfin/configs/BF538-EZKIT_defconfig
arch/blackfin/configs/BF548-EZKIT_defconfig
arch/blackfin/configs/BF561-EZKIT_defconfig
arch/blackfin/configs/BlackStamp_defconfig
arch/blackfin/configs/CM-BF527_defconfig
arch/blackfin/configs/CM-BF548_defconfig
arch/blackfin/configs/IP0X_defconfig
arch/blackfin/configs/SRV1_defconfig
arch/blackfin/include/asm/Kbuild
arch/blackfin/include/asm/bfin_sport.h
arch/blackfin/include/asm/ipipe.h
arch/blackfin/include/asm/ipipe_base.h
arch/blackfin/include/asm/irq.h
arch/blackfin/include/asm/thread_info.h
arch/blackfin/kernel/Makefile
arch/blackfin/kernel/cplb-nompu/cplbinit.c
arch/blackfin/kernel/ipipe.c
arch/blackfin/kernel/irqchip.c
arch/blackfin/kernel/kgdb_test.c
arch/blackfin/kernel/ptrace.c
arch/blackfin/kernel/setup.c
arch/blackfin/kernel/time.c
arch/blackfin/mach-bf518/boards/ezbrd.c
arch/blackfin/mach-bf518/include/mach/anomaly.h
arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf527/boards/cm_bf527.c
arch/blackfin/mach-bf527/boards/ezbrd.c
arch/blackfin/mach-bf527/include/mach/anomaly.h
arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf533/boards/Kconfig
arch/blackfin/mach-bf533/boards/Makefile
arch/blackfin/mach-bf533/boards/blackstamp.c
arch/blackfin/mach-bf533/boards/cm_bf533.c
arch/blackfin/mach-bf533/boards/generic_board.c [deleted file]
arch/blackfin/mach-bf533/boards/ip0x.c
arch/blackfin/mach-bf533/include/mach/anomaly.h
arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf537/boards/Kconfig
arch/blackfin/mach-bf537/boards/Makefile
arch/blackfin/mach-bf537/boards/cm_bf537.c
arch/blackfin/mach-bf537/boards/generic_board.c [deleted file]
arch/blackfin/mach-bf537/boards/minotaur.c
arch/blackfin/mach-bf537/boards/pnav10.c
arch/blackfin/mach-bf537/boards/tcm_bf537.c
arch/blackfin/mach-bf537/include/mach/anomaly.h
arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf538/include/mach/anomaly.h
arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf548/include/mach/anomaly.h
arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf548/include/mach/irq.h
arch/blackfin/mach-bf561/boards/Kconfig
arch/blackfin/mach-bf561/boards/Makefile
arch/blackfin/mach-bf561/boards/cm_bf561.c
arch/blackfin/mach-bf561/boards/generic_board.c [deleted file]
arch/blackfin/mach-bf561/include/mach/anomaly.h
arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-common/arch_checks.c
arch/blackfin/mach-common/cache.S
arch/blackfin/mach-common/clocks-init.c
arch/blackfin/mach-common/dpmc_modes.S
arch/blackfin/mach-common/entry.S
arch/blackfin/mach-common/interrupt.S
arch/blackfin/mach-common/ints-priority.c
arch/blackfin/mach-common/smp.c
arch/blackfin/mm/init.c
arch/frv/mm/dma-alloc.c
arch/ia64/Kconfig
arch/ia64/configs/xen_domu_defconfig [new file with mode: 0644]
arch/ia64/include/asm/kvm.h
arch/ia64/include/asm/mmzone.h
arch/ia64/include/asm/sn/bte.h
arch/ia64/kernel/iosapic.c
arch/ia64/kernel/smpboot.c
arch/ia64/kernel/unwind.c
arch/ia64/kvm/kvm-ia64.c
arch/ia64/kvm/process.c
arch/ia64/mm/numa.c
arch/ia64/sn/kernel/bte.c
arch/ia64/sn/kernel/io_acpi_init.c
arch/ia64/sn/kernel/io_init.c
arch/ia64/sn/pci/pcibr/pcibr_dma.c
arch/ia64/xen/Kconfig
arch/ia64/xen/xen_pv_ops.c
arch/m68k/atari/ataints.c
arch/m68k/atari/atakeyb.c
arch/m68k/atari/config.c
arch/m68k/atari/debug.c
arch/m68k/atari/time.c
arch/m68k/include/asm/atarihw.h
arch/m68k/include/asm/atariints.h
arch/m68knommu/platform/5206e/config.c
arch/m68knommu/platform/528x/config.c
arch/mips/Kconfig
arch/mips/alchemy/common/time.c
arch/mips/include/asm/compat.h
arch/mips/include/asm/seccomp.h
arch/mips/include/asm/spinlock.h
arch/mips/kernel/irq.c
arch/mips/kernel/linux32.c
arch/mips/kernel/scall32-o32.S
arch/mips/kernel/scall64-64.S
arch/mips/kernel/scall64-n32.S
arch/mips/kernel/scall64-o32.S
arch/mips/kernel/signal.c
arch/mips/kernel/signal32.c
arch/mips/kernel/syscall.c
arch/mips/mm/cache.c
arch/mn10300/Kconfig
arch/mn10300/unit-asb2305/pci.c
arch/powerpc/boot/dts/mpc8313erdb.dts
arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
arch/powerpc/include/asm/compat.h
arch/powerpc/include/asm/pgtable-4k.h
arch/powerpc/include/asm/pgtable-64k.h
arch/powerpc/include/asm/pgtable-ppc32.h
arch/powerpc/include/asm/seccomp.h
arch/powerpc/kernel/align.c
arch/powerpc/kernel/ftrace.c
arch/powerpc/kernel/pci-common.c
arch/powerpc/kvm/powerpc.c
arch/powerpc/lib/copyuser_64.S
arch/powerpc/lib/memcpy_64.S
arch/powerpc/lib/sstep.c
arch/powerpc/mm/fsl_booke_mmu.c
arch/powerpc/mm/hash_low_32.S
arch/powerpc/mm/numa.c
arch/powerpc/mm/pgtable_32.c
arch/powerpc/oprofile/cell/spu_profiler.c
arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
arch/powerpc/platforms/86xx/gef_sbc610.c
arch/powerpc/platforms/ps3/mm.c
arch/powerpc/platforms/pseries/hotplug-memory.c
arch/powerpc/sysdev/cpm2_pic.c
arch/powerpc/sysdev/ipic.c
arch/powerpc/sysdev/ppc4xx_pci.c
arch/s390/crypto/aes_s390.c
arch/s390/defconfig
arch/s390/include/asm/cputime.h
arch/s390/include/asm/lowcore.h
arch/s390/include/asm/setup.h
arch/s390/kernel/irq.c
arch/s390/kernel/setup.c
arch/s390/kvm/kvm-s390.c
arch/sh/boards/board-ap325rxa.c
arch/sh/kernel/cpu/sh2a/clock-sh7201.c
arch/sparc/include/asm/compat.h
arch/sparc/include/asm/seccomp.h
arch/sparc/kernel/chmc.c
arch/sparc/kernel/head_64.S
arch/sparc/kernel/nmi.c
arch/sparc/kernel/pcr.c
arch/sparc/lib/GENbzero.S
arch/sparc/lib/GENcopy_from_user.S
arch/sparc/lib/GENcopy_to_user.S
arch/sparc/lib/NG2copy_from_user.S
arch/sparc/lib/NG2copy_to_user.S
arch/sparc/lib/NGbzero.S
arch/sparc/lib/NGcopy_from_user.S
arch/sparc/lib/NGcopy_to_user.S
arch/sparc/lib/U1copy_from_user.S
arch/sparc/lib/U1copy_to_user.S
arch/sparc/lib/U3copy_from_user.S
arch/sparc/lib/U3copy_to_user.S
arch/sparc/lib/bzero.S
arch/sparc/lib/copy_in_user.S
arch/um/drivers/vde_user.c
arch/x86/Kconfig
arch/x86/Kconfig.cpu
arch/x86/Kconfig.debug
arch/x86/include/asm/a.out-core.h
arch/x86/include/asm/cpufeature.h
arch/x86/include/asm/efi.h
arch/x86/include/asm/fixmap_64.h
arch/x86/include/asm/i387.h
arch/x86/include/asm/iomap.h
arch/x86/include/asm/kvm.h
arch/x86/include/asm/math_emu.h
arch/x86/include/asm/mmzone_32.h
arch/x86/include/asm/mmzone_64.h
arch/x86/include/asm/mpspec.h
arch/x86/include/asm/page.h
arch/x86/include/asm/paravirt.h
arch/x86/include/asm/pgtable.h
arch/x86/include/asm/processor.h
arch/x86/include/asm/seccomp_32.h
arch/x86/include/asm/seccomp_64.h
arch/x86/include/asm/spinlock.h
arch/x86/include/asm/traps.h
arch/x86/include/asm/xen/page.h
arch/x86/kernel/acpi/boot.c
arch/x86/kernel/acpi/sleep.c
arch/x86/kernel/acpi/wakeup_64.S
arch/x86/kernel/apic.c
arch/x86/kernel/apm_32.c
arch/x86/kernel/cpu/cpufreq/Kconfig
arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
arch/x86/kernel/cpu/cpufreq/powernow-k8.c
arch/x86/kernel/cpu/intel.c
arch/x86/kernel/cpu/mcheck/mce_64.c
arch/x86/kernel/cpu/mcheck/mce_amd_64.c
arch/x86/kernel/cpu/mcheck/mce_intel_64.c
arch/x86/kernel/ds.c
arch/x86/kernel/efi.c
arch/x86/kernel/efi_64.c
arch/x86/kernel/ftrace.c
arch/x86/kernel/hpet.c
arch/x86/kernel/i387.c
arch/x86/kernel/i8237.c
arch/x86/kernel/io_apic.c
arch/x86/kernel/olpc.c
arch/x86/kernel/paravirt.c
arch/x86/kernel/process.c
arch/x86/kernel/process_32.c
arch/x86/kernel/process_64.c
arch/x86/kernel/ptrace.c
arch/x86/kernel/reboot.c
arch/x86/kernel/setup.c
arch/x86/kernel/time_64.c
arch/x86/kernel/traps.c
arch/x86/kernel/vmi_32.c
arch/x86/kernel/vmiclock_32.c
arch/x86/kvm/i8254.c
arch/x86/kvm/irq.c
arch/x86/kvm/irq.h
arch/x86/kvm/lapic.c
arch/x86/kvm/lapic.h
arch/x86/kvm/mmu.c
arch/x86/kvm/svm.c
arch/x86/kvm/vmx.c
arch/x86/kvm/x86.c
arch/x86/lguest/boot.c
arch/x86/mach-default/setup.c
arch/x86/mach-voyager/setup.c
arch/x86/mach-voyager/voyager_smp.c
arch/x86/math-emu/fpu_aux.c
arch/x86/math-emu/fpu_entry.c
arch/x86/math-emu/fpu_proto.h
arch/x86/math-emu/fpu_system.h
arch/x86/math-emu/get_address.c
arch/x86/mm/init_64.c
arch/x86/mm/iomap_32.c
arch/x86/mm/ioremap.c
arch/x86/mm/kmmio.c
arch/x86/mm/numa_64.c
arch/x86/mm/pageattr.c
arch/x86/mm/pat.c
arch/x86/mm/testmmiotrace.c
arch/x86/oprofile/op_model_ppro.c
arch/x86/xen/enlighten.c
arch/xtensa/Kconfig
arch/xtensa/kernel/setup.c
arch/xtensa/kernel/traps.c
arch/xtensa/mm/fault.c
arch/xtensa/platforms/iss/console.c
block/blk-merge.c
block/blk-timeout.c
block/blktrace.c
block/bsg.c
block/genhd.c
crypto/ahash.c
crypto/algapi.c
crypto/api.c
crypto/lrw.c
crypto/scatterwalk.c
crypto/shash.c
drivers/acpi/Kconfig
drivers/acpi/Makefile
drivers/acpi/acpica/tbutils.c
drivers/acpi/acpica/uteval.c
drivers/acpi/battery.c
drivers/acpi/container.c
drivers/acpi/dock.c
drivers/acpi/ec.c
drivers/acpi/glue.c
drivers/acpi/osl.c
drivers/acpi/pci_link.c
drivers/acpi/processor_idle.c
drivers/acpi/processor_perflib.c
drivers/acpi/sleep.c
drivers/acpi/tables.c
drivers/acpi/video.c
drivers/ata/ahci.c
drivers/ata/libata-core.c
drivers/ata/libata-eh.c
drivers/ata/libata-sff.c
drivers/ata/pata_amd.c
drivers/ata/pata_it821x.c
drivers/ata/pata_legacy.c
drivers/ata/pata_via.c
drivers/ata/sata_mv.c
drivers/ata/sata_nv.c
drivers/atm/fore200e.c
drivers/atm/lanai.c
drivers/atm/solos-pci.c
drivers/base/base.h
drivers/base/dd.c
drivers/base/node.c
drivers/base/power/main.c
drivers/base/sys.c
drivers/block/aoe/aoe.h
drivers/block/aoe/aoedev.c
drivers/block/aoe/aoenet.c
drivers/block/ataflop.c
drivers/block/cciss.c
drivers/block/floppy.c
drivers/block/loop.c
drivers/block/nbd.c
drivers/block/paride/pg.c
drivers/block/xen-blkfront.c
drivers/char/agp/amd64-agp.c
drivers/char/agp/intel-agp.c
drivers/char/scc.h
drivers/char/sx.c
drivers/char/tpm/tpm_infineon.c
drivers/cpufreq/cpufreq.c
drivers/cpufreq/cpufreq_ondemand.c
drivers/crypto/ixp4xx_crypto.c
drivers/crypto/padlock-aes.c
drivers/crypto/padlock-sha.c
drivers/dca/dca-core.c
drivers/dma/dmaengine.c
drivers/dma/dmatest.c
drivers/dma/dw_dmac.c
drivers/dma/dw_dmac_regs.h
drivers/dma/fsldma.c
drivers/dma/ioat.c
drivers/dma/ioat_dca.c
drivers/dma/ioat_dma.c
drivers/dma/ioatdma.h
drivers/dma/ioatdma_hw.h
drivers/dma/ioatdma_registers.h
drivers/dma/iop-adma.c
drivers/dma/ipu/ipu_idmac.c
drivers/dma/mv_xor.c
drivers/firmware/memmap.c
drivers/gpu/drm/Kconfig
drivers/gpu/drm/drm_bufs.c
drivers/gpu/drm/drm_crtc.c
drivers/gpu/drm/drm_crtc_helper.c
drivers/gpu/drm/drm_edid.c
drivers/gpu/drm/drm_fops.c
drivers/gpu/drm/drm_gem.c
drivers/gpu/drm/drm_irq.c
drivers/gpu/drm/drm_lock.c
drivers/gpu/drm/drm_memory.c
drivers/gpu/drm/drm_stub.c
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_drv.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gem_tiling.c
drivers/gpu/drm/i915/i915_irq.c
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_bios.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_fb.c
drivers/gpu/drm/i915/intel_lvds.c
drivers/gpu/drm/i915/intel_sdvo.c
drivers/gpu/drm/i915/intel_sdvo_regs.h
drivers/gpu/drm/i915/intel_tv.c
drivers/gpu/drm/radeon/radeon_cp.c
drivers/hid/hid-core.c
drivers/hid/hid-ids.h
drivers/hid/hidraw.c
drivers/hwmon/f71882fg.c
drivers/hwmon/hp_accel.c
drivers/hwmon/lis3lv02d.c
drivers/hwmon/lis3lv02d.h
drivers/hwmon/lm85.c
drivers/hwmon/vt1211.c
drivers/hwmon/w83627ehf.c
drivers/i2c/busses/i2c-acorn.c
drivers/i2c/busses/i2c-amd8111.c
drivers/i2c/busses/i2c-ixp2000.c
drivers/i2c/busses/i2c-mv64xxx.c
drivers/i2c/busses/i2c-pxa.c
drivers/i2c/busses/scx200_i2c.c
drivers/i2c/i2c-core.c
drivers/i2c/i2c-dev.c
drivers/ide/Kconfig
drivers/ide/Makefile
drivers/ide/amd74xx.c
drivers/ide/at91_ide.c [new file with mode: 0644]
drivers/ide/atiixp.c
drivers/ide/ide-cd.c
drivers/ide/ide-cd.h
drivers/ide/ide-disk_proc.c
drivers/ide/ide-floppy_proc.c
drivers/ide/ide-gd.c
drivers/ide/ide-gd.h
drivers/ide/ide-io.c
drivers/ide/ide-iops.c
drivers/ide/ide-probe.c
drivers/ide/ide-proc.c
drivers/ide/ide-tape.c
drivers/ide/ide.c
drivers/ide/it821x.c
drivers/ieee1394/dma.h
drivers/ieee1394/ieee1394_core.c
drivers/ieee1394/ieee1394_transactions.c
drivers/ieee1394/ieee1394_transactions.h
drivers/ieee1394/iso.h
drivers/ieee1394/nodemgr.c
drivers/ieee1394/nodemgr.h
drivers/input/keyboard/atkbd.c
drivers/input/keyboard/bf54x-keys.c
drivers/input/keyboard/corgikbd.c
drivers/input/keyboard/omap-keypad.c
drivers/input/keyboard/spitzkbd.c
drivers/input/mouse/Kconfig
drivers/input/mouse/elantech.c
drivers/input/mouse/pxa930_trkball.c
drivers/input/mouse/synaptics.c
drivers/input/serio/ambakmi.c
drivers/input/serio/gscps2.c
drivers/input/serio/sa1111ps2.c
drivers/input/touchscreen/atmel_tsadcc.c
drivers/input/touchscreen/corgi_ts.c
drivers/input/touchscreen/tsc2007.c
drivers/input/touchscreen/usbtouchscreen.c
drivers/isdn/hardware/mISDN/hfcmulti.c
drivers/isdn/sc/shmem.c
drivers/lguest/lguest_device.c
drivers/md/dm-io.c
drivers/md/dm-kcopyd.c
drivers/md/md.c
drivers/md/raid1.c
drivers/md/raid10.c
drivers/media/common/tuners/tuner-simple.c
drivers/media/dvb/Kconfig
drivers/media/dvb/Makefile
drivers/media/dvb/b2c2/flexcop-hw-filter.c
drivers/media/dvb/b2c2/flexcop-pci.c
drivers/media/dvb/b2c2/flexcop.c
drivers/media/dvb/dvb-core/dmxdev.c
drivers/media/dvb/dvb-core/dvb_demux.c
drivers/media/dvb/firewire/Kconfig [new file with mode: 0644]
drivers/media/dvb/firewire/Makefile [new file with mode: 0644]
drivers/media/dvb/firewire/firedtv-1394.c [new file with mode: 0644]
drivers/media/dvb/firewire/firedtv-avc.c [new file with mode: 0644]
drivers/media/dvb/firewire/firedtv-ci.c [new file with mode: 0644]
drivers/media/dvb/firewire/firedtv-dvb.c [new file with mode: 0644]
drivers/media/dvb/firewire/firedtv-fe.c [new file with mode: 0644]
drivers/media/dvb/firewire/firedtv-rc.c [new file with mode: 0644]
drivers/media/dvb/firewire/firedtv.h [new file with mode: 0644]
drivers/media/radio/radio-si470x.c
drivers/media/video/em28xx/em28xx-audio.c
drivers/media/video/gspca/gspca.c
drivers/media/video/ivtv/ivtv-ioctl.c
drivers/media/video/pxa_camera.c
drivers/media/video/sh_mobile_ceu_camera.c
drivers/media/video/uvc/uvc_status.c
drivers/message/fusion/mptbase.c
drivers/mfd/htc-egpio.c
drivers/mfd/pcf50633-core.c
drivers/mfd/sm501.c
drivers/mfd/twl4030-core.c
drivers/mfd/wm8350-core.c
drivers/mfd/wm8350-regmap.c
drivers/misc/hpilo.c
drivers/mmc/card/block.c
drivers/mmc/card/mmc_test.c
drivers/mmc/core/mmc_ops.c
drivers/mmc/host/atmel-mci.c
drivers/mmc/host/mxcmmc.c
drivers/mmc/host/omap_hsmmc.c
drivers/mmc/host/s3cmci.c
drivers/mmc/host/sdhci-pci.c
drivers/mmc/host/sdhci.c
drivers/mmc/host/sdhci.h
drivers/mtd/chips/map_rom.c
drivers/mtd/devices/mtd_dataflash.c
drivers/mtd/devices/slram.c
drivers/mtd/lpddr/Kconfig
drivers/mtd/maps/Kconfig
drivers/mtd/maps/bfin-async-flash.c
drivers/mtd/maps/ck804xrom.c
drivers/mtd/maps/physmap.c
drivers/mtd/nand/atmel_nand.c
drivers/mtd/nand/mxc_nand.c
drivers/mtd/nand/orion_nand.c
drivers/net/3c505.c
drivers/net/3c509.c
drivers/net/Kconfig
drivers/net/Makefile
drivers/net/arm/Makefile
drivers/net/arm/etherh.c
drivers/net/arm/ks8695net.c
drivers/net/atl1c/Makefile [new file with mode: 0644]
drivers/net/atl1c/atl1c.h [new file with mode: 0644]
drivers/net/atl1c/atl1c_ethtool.c [new file with mode: 0644]
drivers/net/atl1c/atl1c_hw.c [new file with mode: 0644]
drivers/net/atl1c/atl1c_hw.h [new file with mode: 0644]
drivers/net/atl1c/atl1c_main.c [new file with mode: 0644]
drivers/net/b44.c
drivers/net/bnx2.c
drivers/net/bnx2.h
drivers/net/bnx2_fw.h
drivers/net/bnx2_fw2.h
drivers/net/bonding/bond_main.c
drivers/net/cxgb3/cxgb3_main.c
drivers/net/cxgb3/t3_hw.c
drivers/net/forcedeth.c
drivers/net/gianfar.c
drivers/net/hp-plus.c
drivers/net/irda/mcs7780.c
drivers/net/jme.c
drivers/net/mv643xx_eth.c
drivers/net/netxen/netxen_nic.h
drivers/net/netxen/netxen_nic_main.c
drivers/net/pcmcia/3c574_cs.c
drivers/net/pcmcia/3c589_cs.c
drivers/net/phy/mdio-gpio.c
drivers/net/qlge/qlge_main.c
drivers/net/r8169.c
drivers/net/smc911x.h
drivers/net/smsc911x.c
drivers/net/smsc9420.c
drivers/net/smsc9420.h
drivers/net/sun3lance.c
drivers/net/sundance.c
drivers/net/sungem.c
drivers/net/sunhme.c
drivers/net/sunlance.c
drivers/net/tg3.c
drivers/net/tokenring/tmspci.c
drivers/net/tulip/de2104x.c
drivers/net/tun.c
drivers/net/ucc_geth_mii.c
drivers/net/usb/asix.c
drivers/net/usb/cdc_ether.c
drivers/net/usb/dm9601.c
drivers/net/usb/usbnet.c
drivers/net/usb/zaurus.c
drivers/net/veth.c
drivers/net/wimax/i2400m/i2400m.h
drivers/net/wireless/ath5k/base.c
drivers/net/wireless/ath9k/main.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-tx.c
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/libertas/ethtool.c
drivers/net/wireless/libertas/if_usb.c
drivers/net/wireless/libertas/main.c
drivers/net/wireless/libertas/persistcfg.c
drivers/net/wireless/libertas/scan.c
drivers/net/wireless/libertas/tx.c
drivers/net/wireless/libertas/wext.c
drivers/net/wireless/orinoco/orinoco.c
drivers/net/wireless/p54/p54common.c
drivers/net/wireless/rt2x00/rt2500usb.c
drivers/net/wireless/rt2x00/rt73usb.c
drivers/net/wireless/rtl818x/rtl8187_dev.c
drivers/net/wireless/zd1211rw/zd_rf.c
drivers/net/wireless/zd1211rw/zd_usb.c
drivers/parport/parport_atari.c
drivers/parport/parport_serial.c
drivers/pci/dmar.c
drivers/pci/hotplug/pciehp.h
drivers/pci/hotplug/pciehp_core.c
drivers/pci/hotplug/pciehp_hpc.c
drivers/pci/intel-iommu.c
drivers/pci/intr_remapping.c
drivers/pci/msi.c
drivers/pci/pci-driver.c
drivers/pci/pci-sysfs.c
drivers/pci/pci.c
drivers/pci/pci.h
drivers/pci/pcie/aer/aerdrv_core.c
drivers/pci/pcie/aspm.c
drivers/pci/pcie/portdrv_pci.c
drivers/pci/quirks.c
drivers/pci/rom.c
drivers/platform/x86/Kconfig
drivers/platform/x86/asus-laptop.c
drivers/platform/x86/asus_acpi.c
drivers/platform/x86/eeepc-laptop.c
drivers/platform/x86/fujitsu-laptop.c
drivers/platform/x86/panasonic-laptop.c
drivers/power/pcf50633-charger.c
drivers/rtc/rtc-au1xxx.c
drivers/rtc/rtc-pxa.c
drivers/s390/block/dasd.c
drivers/s390/block/dasd_devmap.c
drivers/s390/char/sclp.c
drivers/s390/char/sclp_cmd.c
drivers/scsi/cxgb3i/cxgb3i.h
drivers/scsi/cxgb3i/cxgb3i_ddp.c
drivers/scsi/cxgb3i/cxgb3i_ddp.h
drivers/scsi/cxgb3i/cxgb3i_init.c
drivers/scsi/cxgb3i/cxgb3i_iscsi.c
drivers/scsi/cxgb3i/cxgb3i_offload.c
drivers/scsi/cxgb3i/cxgb3i_offload.h
drivers/scsi/cxgb3i/cxgb3i_pdu.c
drivers/scsi/cxgb3i/cxgb3i_pdu.h
drivers/scsi/hptiop.c
drivers/scsi/ibmvscsi/ibmvfc.c
drivers/scsi/ibmvscsi/ibmvfc.h
drivers/scsi/ibmvscsi/ibmvscsi.c
drivers/scsi/libiscsi.c
drivers/scsi/lpfc/lpfc_els.c
drivers/scsi/qla2xxx/qla_attr.c
drivers/scsi/qla2xxx/qla_def.h
drivers/scsi/qla2xxx/qla_devtbl.h
drivers/scsi/qla2xxx/qla_fw.h
drivers/scsi/qla2xxx/qla_gbl.h
drivers/scsi/qla2xxx/qla_init.c
drivers/scsi/qla2xxx/qla_isr.c
drivers/scsi/qla2xxx/qla_mbx.c
drivers/scsi/qla2xxx/qla_mid.c
drivers/scsi/qla2xxx/qla_os.c
drivers/scsi/qla2xxx/qla_sup.c
drivers/scsi/qla2xxx/qla_version.h
drivers/scsi/scsi_lib.c
drivers/scsi/scsi_scan.c
drivers/scsi/sd.c
drivers/scsi/sg.c
drivers/serial/8250.c
drivers/serial/8250_pci.c
drivers/serial/atmel_serial.c
drivers/serial/imx.c
drivers/serial/jsm/jsm_driver.c
drivers/serial/sh-sci.h
drivers/spi/spi_gpio.c
drivers/staging/android/Kconfig
drivers/staging/android/ram_console.c
drivers/staging/android/timed_gpio.c
drivers/staging/at76_usb/Kconfig
drivers/staging/at76_usb/at76_usb.c
drivers/staging/at76_usb/at76_usb.h
drivers/staging/panel/panel.c
drivers/staging/rtl8187se/Kconfig
drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
drivers/staging/rtl8187se/r8180_core.c
drivers/staging/winbond/wbusb.c
drivers/usb/Makefile
drivers/usb/class/cdc-acm.c
drivers/usb/core/hcd-pci.c
drivers/usb/core/hcd.h
drivers/usb/core/message.c
drivers/usb/gadget/Kconfig
drivers/usb/gadget/f_obex.c
drivers/usb/gadget/file_storage.c
drivers/usb/gadget/fsl_qe_udc.c
drivers/usb/gadget/fsl_usb2_udc.c
drivers/usb/gadget/pxa25x_udc.c
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci-mem.c
drivers/usb/host/ehci-pci.c
drivers/usb/host/ehci-sched.c
drivers/usb/host/ehci.h
drivers/usb/host/ohci-pci.c
drivers/usb/host/uhci-hcd.c
drivers/usb/host/whci/asl.c
drivers/usb/host/whci/pzl.c
drivers/usb/musb/davinci.c
drivers/usb/musb/musb_core.c
drivers/usb/musb/musb_gadget.c
drivers/usb/musb/musb_host.c
drivers/usb/serial/aircable.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/ftdi_sio.h
drivers/usb/serial/option.c
drivers/usb/serial/ti_usb_3410_5052.c
drivers/usb/serial/ti_usb_3410_5052.h
drivers/usb/storage/scsiglue.c
drivers/usb/storage/transport.c
drivers/usb/storage/unusual_devs.h
drivers/video/Kconfig
drivers/video/atafb.c
drivers/video/aty/aty128fb.c
drivers/video/aty/atyfb_base.c
drivers/video/aty/radeon_pm.c
drivers/video/aty/radeonfb.h
drivers/video/bfin-t350mcqb-fb.c
drivers/video/geode/gx1fb_core.c
drivers/video/geode/gxfb_core.c
drivers/video/geode/lxfb_core.c
drivers/video/i810/i810_main.c
drivers/video/imxfb.c
drivers/video/mx3fb.c
drivers/video/pxafb.c
drivers/video/sh_mobile_lcdcfb.c
drivers/w1/masters/mxc_w1.c
drivers/w1/slaves/Kconfig
drivers/w1/slaves/Makefile
drivers/w1/slaves/w1_ds2433.c
drivers/w1/slaves/w1_therm.c
drivers/watchdog/Kconfig
drivers/watchdog/at91rm9200_wdt.c
drivers/watchdog/at91sam9_wdt.c
drivers/watchdog/gef_wdt.c
drivers/watchdog/iTCO_vendor_support.c
drivers/watchdog/iTCO_wdt.c
drivers/watchdog/ks8695_wdt.c
drivers/watchdog/orion5x_wdt.c
drivers/watchdog/rc32434_wdt.c
drivers/xen/manage.c
fs/Makefile
fs/bio.c
fs/btrfs/btrfs_inode.h
fs/btrfs/ctree.c
fs/btrfs/ctree.h
fs/btrfs/disk-io.c
fs/btrfs/disk-io.h
fs/btrfs/extent-tree.c
fs/btrfs/extent_io.c
fs/btrfs/file.c
fs/btrfs/inode-map.c
fs/btrfs/inode.c
fs/btrfs/ioctl.c
fs/btrfs/locking.c
fs/btrfs/locking.h
fs/btrfs/super.c
fs/btrfs/transaction.c
fs/btrfs/tree-log.c
fs/btrfs/volumes.c
fs/buffer.c
fs/cifs/CHANGES
fs/cifs/cifsfs.h
fs/cifs/cifsglob.h
fs/cifs/cifsproto.h
fs/cifs/cifssmb.c
fs/cifs/connect.c
fs/cifs/dir.c
fs/cifs/inode.c
fs/cifs/readdir.c
fs/cifs/sess.c
fs/compat.c
fs/compat_ioctl.c
fs/dcache.c
fs/devpts/inode.c
fs/exec.c
fs/ext2/super.c
fs/ext3/super.c
fs/ext4/balloc.c
fs/ext4/ext4.h
fs/ext4/ialloc.c
fs/ext4/inode.c
fs/ext4/mballoc.c
fs/ext4/migrate.c
fs/ext4/super.c
fs/hugetlbfs/inode.c
fs/internal.h
fs/jbd/journal.c
fs/jbd2/journal.c
fs/jbd2/transaction.c
fs/jffs2/background.c
fs/jffs2/readinode.c
fs/lockd/svclock.c
fs/namespace.c
fs/notify/inotify/inotify.c
fs/ocfs2/alloc.c
fs/ocfs2/dlm/dlmmaster.c
fs/ocfs2/dlm/dlmthread.c
fs/ocfs2/dlm/dlmunlock.c
fs/ocfs2/dlmglue.c
fs/ocfs2/journal.h
fs/ocfs2/ocfs2.h
fs/ocfs2/super.c
fs/ocfs2/xattr.c
fs/proc/inode.c
fs/proc/page.c
fs/seq_file.c
fs/squashfs/block.c
fs/squashfs/cache.c
fs/squashfs/inode.c
fs/squashfs/squashfs.h
fs/squashfs/super.c
fs/super.c
fs/timerfd.c
fs/xfs/linux-2.6/xfs_buf.c
include/acpi/pdc_intel.h
include/asm-frv/pgtable.h
include/crypto/hash.h
include/drm/drmP.h
include/drm/drm_crtc.h
include/drm/drm_crtc_helper.h
include/drm/drm_edid.h
include/drm/i915_drm.h
include/linux/Kbuild
include/linux/async.h
include/linux/ata.h
include/linux/bio.h
include/linux/blkdev.h
include/linux/blktrace_api.h
include/linux/cgroup.h
include/linux/cpufreq.h
include/linux/crypto.h
include/linux/dcbnl.h
include/linux/device.h
include/linux/dmaengine.h
include/linux/firmware-map.h
include/linux/fs.h
include/linux/hdreg.h
include/linux/hugetlb.h
include/linux/i2c-dev.h
include/linux/i2c.h
include/linux/ide.h
include/linux/if_vlan.h
include/linux/init_task.h
include/linux/intel-iommu.h
include/linux/io-mapping.h
include/linux/jbd2.h
include/linux/kvm.h
include/linux/kvm_host.h
include/linux/libata.h
include/linux/mm.h
include/linux/mmzone.h
include/linux/module.h
include/linux/netdevice.h
include/linux/netfilter/xt_NFLOG.h
include/linux/pci.h
include/linux/pci_ids.h
include/linux/pkt_sched.h
include/linux/pm.h
include/linux/rcuclassic.h
include/linux/rcupdate.h
include/linux/rcupreempt.h
include/linux/rcutree.h
include/linux/sched.h
include/linux/seq_file.h
include/linux/serial_core.h
include/linux/serio.h
include/linux/skbuff.h
include/linux/slab.h
include/linux/soundcard.h
include/linux/spi/spi_bitbang.h
include/linux/spinlock.h
include/linux/syscalls.h
include/linux/timerfd.h
include/linux/user_namespace.h
include/linux/vmalloc.h
include/net/net_namespace.h
include/net/netfilter/nf_conntrack_core.h
include/net/sock.h
init/Kconfig
init/do_mounts.c
init/do_mounts_md.c
init/main.c
ipc/shm.c
kernel/Makefile
kernel/async.c
kernel/cgroup.c
kernel/exit.c
kernel/fork.c
kernel/futex.c
kernel/itimer.c
kernel/kexec.c
kernel/posix-cpu-timers.c
kernel/power/Makefile
kernel/power/console.c
kernel/power/disk.c
kernel/power/main.c
kernel/power/swap.c
kernel/power/user.c
kernel/printk.c
kernel/profile.c
kernel/rcuclassic.c
kernel/rcupdate.c
kernel/rcupreempt.c
kernel/rcutree.c
kernel/sched.c
kernel/sched_fair.c
kernel/sched_stats.h
kernel/seccomp.c
kernel/signal.c
kernel/softirq.c
kernel/sys.c
kernel/sysctl.c
kernel/trace/Kconfig
kernel/trace/ftrace.c
kernel/trace/trace_mmiotrace.c
kernel/trace/trace_selftest.c
kernel/tsacct.c
kernel/user.c
kernel/user_namespace.c
lib/Kconfig.debug
lib/idr.c
mm/fremap.c
mm/hugetlb.c
mm/migrate.c
mm/mlock.c
mm/mmap.c
mm/mprotect.c
mm/page-writeback.c
mm/page_alloc.c
mm/page_cgroup.c
mm/page_io.c
mm/rmap.c
mm/shmem.c
mm/slab.c
mm/slob.c
mm/slub.c
mm/swapfile.c
mm/util.c
mm/vmalloc.c
mm/vmscan.c
net/802/tr.c
net/8021q/vlan_core.c
net/8021q/vlan_dev.c
net/9p/protocol.c
net/bridge/br_forward.c
net/core/dev.c
net/core/neighbour.c
net/core/net-sysfs.c
net/core/net_namespace.c
net/core/skbuff.c
net/core/sock.c
net/ipv4/cipso_ipv4.c
net/ipv4/icmp.c
net/ipv4/tcp_input.c
net/ipv4/tcp_ipv4.c
net/ipv4/tcp_output.c
net/ipv4/tcp_scalable.c
net/ipv4/udp.c
net/ipv6/addrconf.c
net/ipv6/af_inet6.c
net/ipv6/inet6_hashtables.c
net/ipv6/ip6_flowlabel.c
net/ipv6/ip6_tunnel.c
net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
net/mac80211/tx.c
net/netfilter/nf_conntrack_netlink.c
net/netfilter/nfnetlink_log.c
net/netfilter/x_tables.c
net/netfilter/xt_recent.c
net/netfilter/xt_sctp.c
net/netlink/af_netlink.c
net/phonet/pep-gprs.c
net/phonet/pep.c
net/rxrpc/af_rxrpc.c
net/sched/act_police.c
net/sched/sch_drr.c
net/sctp/protocol.c
net/sctp/sm_sideeffect.c
net/sctp/sm_statefuns.c
net/wimax/id-table.c
net/wireless/reg.c
scripts/bootgraph.pl
scripts/checkpatch.pl
scripts/kernel-doc
scripts/markup_oops.pl
scripts/mod/file2alias.c
scripts/package/mkspec
scripts/setlocalversion
scripts/tags.sh
security/selinux/netlabel.c
security/smack/smack_lsm.c
security/smack/smackfs.c
sound/arm/aaci.c
sound/core/jack.c
sound/core/oss/rate.c
sound/drivers/mtpav.c
sound/oss/dmasound/dmasound_atari.c
sound/pci/aw2/aw2-alsa.c
sound/pci/emu10k1/emu10k1_main.c
sound/pci/hda/hda_codec.c
sound/pci/hda/hda_hwdep.c
sound/pci/hda/hda_intel.c
sound/pci/hda/hda_local.h
sound/pci/hda/patch_analog.c
sound/pci/hda/patch_intelhdmi.c
sound/pci/hda/patch_realtek.c
sound/pci/hda/patch_sigmatel.c
sound/pci/oxygen/virtuoso.c
sound/pci/pcxhr/pcxhr.h
sound/soc/codecs/tlv320aic3x.c
sound/soc/codecs/wm8990.c
sound/soc/omap/sdp3430.c
sound/soc/soc-core.c
sound/usb/usbaudio.c
sound/usb/usbmidi.c
virt/kvm/iommu.c
virt/kvm/kvm_main.c

diff --git a/CREDITS b/CREDITS
index 2b39168..5e07367 100644 (file)
--- a/CREDITS
+++ b/CREDITS
@@ -2166,7 +2166,6 @@ D: Initial implementation of VC's, pty's and select()
 
 N: Pavel Machek
 E: pavel@ucw.cz
-E: pavel@suse.cz
 D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
 D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
 D: work on suspend-to-ram/disk, killing duplicates from ioctl32
index ceddcff..e638e15 100644 (file)
@@ -1,3 +1,46 @@
+What:          /sys/bus/pci/drivers/.../bind
+Date:          December 2003
+Contact:       linux-pci@vger.kernel.org
+Description:
+               Writing a device location to this file will cause
+               the driver to attempt to bind to the device found at
+               this location.  This is useful for overriding default
+               bindings.  The format for the location is: DDDD:BB:DD.F.
+               That is Domain:Bus:Device.Function and is the same as
+               found in /sys/bus/pci/devices/.  For example:
+               # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+               (Note: kernels before 2.6.28 may require echo -n).
+
+What:          /sys/bus/pci/drivers/.../unbind
+Date:          December 2003
+Contact:       linux-pci@vger.kernel.org
+Description:
+               Writing a device location to this file will cause the
+               driver to attempt to unbind from the device found at
+               this location.  This may be useful when overriding default
+               bindings.  The format for the location is: DDDD:BB:DD.F.
+               That is Domain:Bus:Device.Function and is the same as
+               found in /sys/bus/pci/devices/. For example:
+               # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+               (Note: kernels before 2.6.28 may require echo -n).
+
+What:          /sys/bus/pci/drivers/.../new_id
+Date:          December 2003
+Contact:       linux-pci@vger.kernel.org
+Description:
+               Writing a device ID to this file will attempt to
+               dynamically add a new device ID to a PCI device driver.
+               This may allow the driver to support more hardware than
+               was included in the driver's static device ID support
+               table at compile time.  The format for the device ID is:
+               VVVV DDDD SVVV SDDD CCCC MMMM PPPP.  That is Vendor ID,
+               Device ID, Subsystem Vendor ID, Subsystem Device ID,
+               Class, Class Mask, and Private Driver Data.  The Vendor ID
+               and Device ID fields are required, the rest are optional.
+               Upon successfully adding an ID, the driver will probe
+               for the device and attempt to bind to it.  For example:
+               # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
 What:          /sys/bus/pci/devices/.../vpd
 Date:          February 2008
 Contact:       Ben Hutchings <bhutchings@solarflare.com>
index 0d99ee6..eca0d65 100644 (file)
@@ -1,6 +1,6 @@
 What:          /sys/firmware/memmap/
 Date:          June 2008
-Contact:       Bernhard Walle <bwalle@suse.de>
+Contact:       Bernhard Walle <bernhard.walle@gmx.de>
 Description:
                On all platforms, the firmware provides a memory map which the
                kernel reads. The resources from that memory map are registered
index dc3154e..1462ed8 100644 (file)
@@ -6,7 +6,7 @@
 # To add a new book the only step required is to add the book to the
 # list of DOCBOOKS.
 
-DOCBOOKS := z8530book.xml mcabook.xml \
+DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
            kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
            procfs-guide.xml writing_usb_driver.xml networking.xml \
            kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
new file mode 100644 (file)
index 0000000..94a20fe
--- /dev/null
@@ -0,0 +1,418 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+       "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="LinuxDriversAPI">
+ <bookinfo>
+  <title>Linux Device Drivers</title>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="Basics">
+     <title>Driver Basics</title>
+     <sect1><title>Driver Entry and Exit points</title>
+!Iinclude/linux/init.h
+     </sect1>
+
+     <sect1><title>Atomic and pointer manipulation</title>
+!Iarch/x86/include/asm/atomic_32.h
+!Iarch/x86/include/asm/unaligned.h
+     </sect1>
+
+     <sect1><title>Delaying, scheduling, and timer routines</title>
+!Iinclude/linux/sched.h
+!Ekernel/sched.c
+!Ekernel/timer.c
+     </sect1>
+     <sect1><title>High-resolution timers</title>
+!Iinclude/linux/ktime.h
+!Iinclude/linux/hrtimer.h
+!Ekernel/hrtimer.c
+     </sect1>
+     <sect1><title>Workqueues and Kevents</title>
+!Ekernel/workqueue.c
+     </sect1>
+     <sect1><title>Internal Functions</title>
+!Ikernel/exit.c
+!Ikernel/signal.c
+!Iinclude/linux/kthread.h
+!Ekernel/kthread.c
+     </sect1>
+
+     <sect1><title>Kernel objects manipulation</title>
+<!--
+X!Iinclude/linux/kobject.h
+-->
+!Elib/kobject.c
+     </sect1>
+
+     <sect1><title>Kernel utility functions</title>
+!Iinclude/linux/kernel.h
+!Ekernel/printk.c
+!Ekernel/panic.c
+!Ekernel/sys.c
+!Ekernel/rcupdate.c
+     </sect1>
+
+     <sect1><title>Device Resource Management</title>
+!Edrivers/base/devres.c
+     </sect1>
+
+  </chapter>
+
+  <chapter id="devdrivers">
+     <title>Device drivers infrastructure</title>
+     <sect1><title>Device Drivers Base</title>
+<!--
+X!Iinclude/linux/device.h
+-->
+!Edrivers/base/driver.c
+!Edrivers/base/core.c
+!Edrivers/base/class.c
+!Edrivers/base/firmware_class.c
+!Edrivers/base/transport_class.c
+<!-- Cannot be included, because
+     attribute_container_add_class_device_adapter
+ and attribute_container_classdev_to_container
+     exceed allowed 44 characters maximum
+X!Edrivers/base/attribute_container.c
+-->
+!Edrivers/base/sys.c
+<!--
+X!Edrivers/base/interface.c
+-->
+!Edrivers/base/platform.c
+!Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers Power Management</title>
+!Edrivers/base/power/main.c
+     </sect1>
+     <sect1><title>Device Drivers ACPI Support</title>
+<!-- Internal functions only
+X!Edrivers/acpi/sleep/main.c
+X!Edrivers/acpi/sleep/wakeup.c
+X!Edrivers/acpi/motherboard.c
+X!Edrivers/acpi/bus.c
+-->
+!Edrivers/acpi/scan.c
+!Idrivers/acpi/scan.c
+<!-- No correct structured comments
+X!Edrivers/acpi/pci_bind.c
+-->
+     </sect1>
+     <sect1><title>Device drivers PnP support</title>
+!Idrivers/pnp/core.c
+<!-- No correct structured comments
+X!Edrivers/pnp/system.c
+ -->
+!Edrivers/pnp/card.c
+!Idrivers/pnp/driver.c
+!Edrivers/pnp/manager.c
+!Edrivers/pnp/support.c
+     </sect1>
+     <sect1><title>Userspace IO devices</title>
+!Edrivers/uio/uio.c
+!Iinclude/linux/uio_driver.h
+     </sect1>
+  </chapter>
+
+  <chapter id="parportdev">
+     <title>Parallel Port Devices</title>
+!Iinclude/linux/parport.h
+!Edrivers/parport/ieee1284.c
+!Edrivers/parport/share.c
+!Idrivers/parport/daisy.c
+  </chapter>
+
+  <chapter id="message_devices">
+       <title>Message-based devices</title>
+     <sect1><title>Fusion message devices</title>
+!Edrivers/message/fusion/mptbase.c
+!Idrivers/message/fusion/mptbase.c
+!Edrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptctl.c
+!Idrivers/message/fusion/mptspi.c
+!Idrivers/message/fusion/mptfc.c
+!Idrivers/message/fusion/mptlan.c
+     </sect1>
+     <sect1><title>I2O message devices</title>
+!Iinclude/linux/i2o.h
+!Idrivers/message/i2o/core.h
+!Edrivers/message/i2o/iop.c
+!Idrivers/message/i2o/iop.c
+!Idrivers/message/i2o/config-osm.c
+!Edrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/bus-osm.c
+!Edrivers/message/i2o/device.c
+!Idrivers/message/i2o/device.c
+!Idrivers/message/i2o/driver.c
+!Idrivers/message/i2o/pci.c
+!Idrivers/message/i2o/i2o_block.c
+!Idrivers/message/i2o/i2o_scsi.c
+!Idrivers/message/i2o/i2o_proc.c
+     </sect1>
+  </chapter>
+
+  <chapter id="snddev">
+     <title>Sound Devices</title>
+!Iinclude/sound/core.h
+!Esound/sound_core.c
+!Iinclude/sound/pcm.h
+!Esound/core/pcm.c
+!Esound/core/device.c
+!Esound/core/info.c
+!Esound/core/rawmidi.c
+!Esound/core/sound.c
+!Esound/core/memory.c
+!Esound/core/pcm_memory.c
+!Esound/core/init.c
+!Esound/core/isadma.c
+!Esound/core/control.c
+!Esound/core/pcm_lib.c
+!Esound/core/hwdep.c
+!Esound/core/pcm_native.c
+!Esound/core/memalloc.c
+<!-- FIXME: Removed for now since no structured comments in source
+X!Isound/sound_firmware.c
+-->
+  </chapter>
+
+  <chapter id="uart16x50">
+     <title>16x50 UART Driver</title>
+!Iinclude/linux/serial_core.h
+!Edrivers/serial/serial_core.c
+!Edrivers/serial/8250.c
+  </chapter>
+
+  <chapter id="fbdev">
+     <title>Frame Buffer Library</title>
+
+     <para>
+       The frame buffer drivers depend heavily on four data structures.
+       These structures are declared in include/linux/fb.h.  They are
+       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
+       The last three can be made available to and from userland.
+     </para>
+
+     <para>
+       fb_info defines the current state of a particular video card.
+       Inside fb_info, there exists a fb_ops structure which is a
+       collection of needed functions to make fbdev and fbcon work.
+       fb_info is only visible to the kernel.
+     </para>
+
+     <para>
+       fb_var_screeninfo is used to describe the features of a video card
+       that are user defined.  With fb_var_screeninfo, things such as
+       depth and the resolution may be defined.
+     </para>
+
+     <para>
+       The next structure is fb_fix_screeninfo. This defines the
+       properties of a card that are created when a mode is set and can't
+       be changed otherwise.  A good example of this is the start of the
+       frame buffer memory.  This "locks" the address of the frame buffer
+       memory, so that it cannot be changed or moved.
+     </para>
+
+     <para>
+       The last structure is fb_monospecs. In the old API, there was
+       little importance for fb_monospecs. This allowed for forbidden things
+       such as setting a mode of 800x600 on a fix frequency monitor. With
+       the new API, fb_monospecs prevents such things, and if used
+       correctly, can prevent a monitor from being cooked.  fb_monospecs
+       will not be useful until kernels 2.5.x.
+     </para>
+
+     <sect1><title>Frame Buffer Memory</title>
+!Edrivers/video/fbmem.c
+     </sect1>
+<!--
+     <sect1><title>Frame Buffer Console</title>
+X!Edrivers/video/console/fbcon.c
+     </sect1>
+-->
+     <sect1><title>Frame Buffer Colormap</title>
+!Edrivers/video/fbcmap.c
+     </sect1>
+<!-- FIXME:
+  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
+  out until somebody adds docs.  KAO
+     <sect1><title>Frame Buffer Generic Functions</title>
+X!Idrivers/video/fbgen.c
+     </sect1>
+KAO -->
+     <sect1><title>Frame Buffer Video Mode Database</title>
+!Idrivers/video/modedb.c
+!Edrivers/video/modedb.c
+     </sect1>
+     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
+!Edrivers/video/macmodes.c
+     </sect1>
+     <sect1><title>Frame Buffer Fonts</title>
+        <para>
+           Refer to the file drivers/video/console/fonts.c for more information.
+        </para>
+<!-- FIXME: Removed for now since no structured comments in source
+X!Idrivers/video/console/fonts.c
+-->
+     </sect1>
+  </chapter>
+
+  <chapter id="input_subsystem">
+     <title>Input Subsystem</title>
+!Iinclude/linux/input.h
+!Edrivers/input/input.c
+!Edrivers/input/ff-core.c
+!Edrivers/input/ff-memless.c
+  </chapter>
+
+  <chapter id="spi">
+      <title>Serial Peripheral Interface (SPI)</title>
+  <para>
+       SPI is the "Serial Peripheral Interface", widely used with
+       embedded systems because it is a simple and efficient
+       interface:  basically a multiplexed shift register.
+       Its three signal wires hold a clock (SCK, often in the range
+       of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
+       a "Master In, Slave Out" (MISO) data line.
+       SPI is a full duplex protocol; for each bit shifted out the
+       MOSI line (one per clock) another is shifted in on the MISO line.
+       Those bits are assembled into words of various sizes on the
+       way to and from system memory.
+       An additional chipselect line is usually active-low (nCS);
+       four signals are normally used for each peripheral, plus
+       sometimes an interrupt.
+  </para>
+  <para>
+       The SPI bus facilities listed here provide a generalized
+       interface to declare SPI busses and devices, manage them
+       according to the standard Linux driver model, and perform
+       input/output operations.
+       At this time, only "master" side interfaces are supported,
+       where Linux talks to SPI peripherals and does not implement
+       such a peripheral itself.
+       (Interfaces to support implementing SPI slaves would
+       necessarily look different.)
+  </para>
+  <para>
+       The programming interface is structured around two kinds of driver,
+       and two kinds of device.
+       A "Controller Driver" abstracts the controller hardware, which may
+       be as simple as a set of GPIO pins or as complex as a pair of FIFOs
+       connected to dual DMA engines on the other side of the SPI shift
+       register (maximizing throughput).  Such drivers bridge between
+       whatever bus they sit on (often the platform bus) and SPI, and
+       expose the SPI side of their device as a
+       <structname>struct spi_master</structname>.
+       SPI devices are children of that master, represented as a
+       <structname>struct spi_device</structname> and manufactured from
+       <structname>struct spi_board_info</structname> descriptors which
+       are usually provided by board-specific initialization code.
+       A <structname>struct spi_driver</structname> is called a
+       "Protocol Driver", and is bound to a spi_device using normal
+       driver model calls.
+  </para>
+  <para>
+       The I/O model is a set of queued messages.  Protocol drivers
+       submit one or more <structname>struct spi_message</structname>
+       objects, which are processed and completed asynchronously.
+       (There are synchronous wrappers, however.)  Messages are
+       built from one or more <structname>struct spi_transfer</structname>
+       objects, each of which wraps a full duplex SPI transfer.
+       A variety of protocol tweaking options are needed, because
+       different chips adopt very different policies for how they
+       use the bits transferred with SPI.
+  </para>
+!Iinclude/linux/spi/spi.h
+!Fdrivers/spi/spi.c spi_register_board_info
+!Edrivers/spi/spi.c
+  </chapter>
+
+  <chapter id="i2c">
+     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
+
+     <para>
+       I<superscript>2</superscript>C (or without fancy typography, "I2C")
+       is an acronym for the "Inter-IC" bus, a simple bus protocol which is
+       widely used where low data rate communications suffice.
+       Since it's also a licensed trademark, some vendors use another
+       name (such as "Two-Wire Interface", TWI) for the same bus.
+       I2C only needs two signals (SCL for clock, SDA for data), conserving
+       board real estate and minimizing signal quality issues.
+       Most I2C devices use seven bit addresses, and bus speeds of up
+       to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
+       found wide use.
+       I2C is a multi-master bus; open drain signaling is used to
+       arbitrate between masters, as well as to handshake and to
+       synchronize clocks from slower clients.
+     </para>
+
+     <para>
+       The Linux I2C programming interfaces support only the master
+       side of bus interactions, not the slave side.
+       The programming interface is structured around two kinds of driver,
+       and two kinds of device.
+       An I2C "Adapter Driver" abstracts the controller hardware; it binds
+       to a physical device (perhaps a PCI device or platform_device) and
+       exposes a <structname>struct i2c_adapter</structname> representing
+       each I2C bus segment it manages.
+       On each I2C bus segment will be I2C devices represented by a
+       <structname>struct i2c_client</structname>.  Those devices will
+       be bound to a <structname>struct i2c_driver</structname>,
+       which should follow the standard Linux driver model.
+       (At this writing, a legacy model is more widely used.)
+       There are functions to perform various I2C protocol operations; at
+       this writing all such functions are usable only from task context.
+     </para>
+
+     <para>
+       The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
+       systems are also I2C conformant.  The electrical constraints are
+       tighter for SMBus, and it standardizes particular protocol messages
+       and idioms.  Controllers that support I2C can also support most
+       SMBus operations, but SMBus controllers don't support all the protocol
+       options that an I2C controller will.
+       There are functions to perform various SMBus protocol operations,
+       either using I2C primitives or by issuing SMBus commands to
+       i2c_adapter devices which don't support those I2C operations.
+     </para>
+
+!Iinclude/linux/i2c.h
+!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
+!Edrivers/i2c/i2c-core.c
+  </chapter>
+
+</book>
index 5818ff7..bc962cd 100644 (file)
 
 <toc></toc>
 
-  <chapter id="Basics">
-     <title>Driver Basics</title>
-     <sect1><title>Driver Entry and Exit points</title>
-!Iinclude/linux/init.h
-     </sect1>
-
-     <sect1><title>Atomic and pointer manipulation</title>
-!Iarch/x86/include/asm/atomic_32.h
-!Iarch/x86/include/asm/unaligned.h
-     </sect1>
-
-     <sect1><title>Delaying, scheduling, and timer routines</title>
-!Iinclude/linux/sched.h
-!Ekernel/sched.c
-!Ekernel/timer.c
-     </sect1>
-     <sect1><title>High-resolution timers</title>
-!Iinclude/linux/ktime.h
-!Iinclude/linux/hrtimer.h
-!Ekernel/hrtimer.c
-     </sect1>
-     <sect1><title>Workqueues and Kevents</title>
-!Ekernel/workqueue.c
-     </sect1>
-     <sect1><title>Internal Functions</title>
-!Ikernel/exit.c
-!Ikernel/signal.c
-!Iinclude/linux/kthread.h
-!Ekernel/kthread.c
-     </sect1>
-
-     <sect1><title>Kernel objects manipulation</title>
-<!--
-X!Iinclude/linux/kobject.h
--->
-!Elib/kobject.c
-     </sect1>
-
-     <sect1><title>Kernel utility functions</title>
-!Iinclude/linux/kernel.h
-!Ekernel/printk.c
-!Ekernel/panic.c
-!Ekernel/sys.c
-!Ekernel/rcupdate.c
-     </sect1>
-
-     <sect1><title>Device Resource Management</title>
-!Edrivers/base/devres.c
-     </sect1>
-
-  </chapter>
-
   <chapter id="adt">
      <title>Data Types</title>
      <sect1><title>Doubly Linked Lists</title>
@@ -298,62 +246,6 @@ X!Earch/x86/kernel/mca_32.c
 !Ikernel/acct.c
   </chapter>
 
-  <chapter id="devdrivers">
-     <title>Device drivers infrastructure</title>
-     <sect1><title>Device Drivers Base</title>
-<!--
-X!Iinclude/linux/device.h
--->
-!Edrivers/base/driver.c
-!Edrivers/base/core.c
-!Edrivers/base/class.c
-!Edrivers/base/firmware_class.c
-!Edrivers/base/transport_class.c
-<!-- Cannot be included, because
-     attribute_container_add_class_device_adapter
- and attribute_container_classdev_to_container
-     exceed allowed 44 characters maximum
-X!Edrivers/base/attribute_container.c
--->
-!Edrivers/base/sys.c
-<!--
-X!Edrivers/base/interface.c
--->
-!Edrivers/base/platform.c
-!Edrivers/base/bus.c
-     </sect1>
-     <sect1><title>Device Drivers Power Management</title>
-!Edrivers/base/power/main.c
-     </sect1>
-     <sect1><title>Device Drivers ACPI Support</title>
-<!-- Internal functions only
-X!Edrivers/acpi/sleep/main.c
-X!Edrivers/acpi/sleep/wakeup.c
-X!Edrivers/acpi/motherboard.c
-X!Edrivers/acpi/bus.c
--->
-!Edrivers/acpi/scan.c
-!Idrivers/acpi/scan.c
-<!-- No correct structured comments
-X!Edrivers/acpi/pci_bind.c
--->
-     </sect1>
-     <sect1><title>Device drivers PnP support</title>
-!Idrivers/pnp/core.c
-<!-- No correct structured comments
-X!Edrivers/pnp/system.c
- -->
-!Edrivers/pnp/card.c
-!Idrivers/pnp/driver.c
-!Edrivers/pnp/manager.c
-!Edrivers/pnp/support.c
-     </sect1>
-     <sect1><title>Userspace IO devices</title>
-!Edrivers/uio/uio.c
-!Iinclude/linux/uio_driver.h
-     </sect1>
-  </chapter>
-
   <chapter id="blkdev">
      <title>Block Devices</title>
 !Eblock/blk-core.c
@@ -381,275 +273,6 @@ X!Edrivers/pnp/system.c
 !Edrivers/char/misc.c
   </chapter>
 
-  <chapter id="parportdev">
-     <title>Parallel Port Devices</title>
-!Iinclude/linux/parport.h
-!Edrivers/parport/ieee1284.c
-!Edrivers/parport/share.c
-!Idrivers/parport/daisy.c
-  </chapter>
-
-  <chapter id="message_devices">
-       <title>Message-based devices</title>
-     <sect1><title>Fusion message devices</title>
-!Edrivers/message/fusion/mptbase.c
-!Idrivers/message/fusion/mptbase.c
-!Edrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptctl.c
-!Idrivers/message/fusion/mptspi.c
-!Idrivers/message/fusion/mptfc.c
-!Idrivers/message/fusion/mptlan.c
-     </sect1>
-     <sect1><title>I2O message devices</title>
-!Iinclude/linux/i2o.h
-!Idrivers/message/i2o/core.h
-!Edrivers/message/i2o/iop.c
-!Idrivers/message/i2o/iop.c
-!Idrivers/message/i2o/config-osm.c
-!Edrivers/message/i2o/exec-osm.c
-!Idrivers/message/i2o/exec-osm.c
-!Idrivers/message/i2o/bus-osm.c
-!Edrivers/message/i2o/device.c
-!Idrivers/message/i2o/device.c
-!Idrivers/message/i2o/driver.c
-!Idrivers/message/i2o/pci.c
-!Idrivers/message/i2o/i2o_block.c
-!Idrivers/message/i2o/i2o_scsi.c
-!Idrivers/message/i2o/i2o_proc.c
-     </sect1>
-  </chapter>
-
-  <chapter id="snddev">
-     <title>Sound Devices</title>
-!Iinclude/sound/core.h
-!Esound/sound_core.c
-!Iinclude/sound/pcm.h
-!Esound/core/pcm.c
-!Esound/core/device.c
-!Esound/core/info.c
-!Esound/core/rawmidi.c
-!Esound/core/sound.c
-!Esound/core/memory.c
-!Esound/core/pcm_memory.c
-!Esound/core/init.c
-!Esound/core/isadma.c
-!Esound/core/control.c
-!Esound/core/pcm_lib.c
-!Esound/core/hwdep.c
-!Esound/core/pcm_native.c
-!Esound/core/memalloc.c
-<!-- FIXME: Removed for now since no structured comments in source
-X!Isound/sound_firmware.c
--->
-  </chapter>
-
-  <chapter id="uart16x50">
-     <title>16x50 UART Driver</title>
-!Iinclude/linux/serial_core.h
-!Edrivers/serial/serial_core.c
-!Edrivers/serial/8250.c
-  </chapter>
-
-  <chapter id="fbdev">
-     <title>Frame Buffer Library</title>
-
-     <para>
-       The frame buffer drivers depend heavily on four data structures.  
-       These structures are declared in include/linux/fb.h.  They are 
-       fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. 
-       The last three can be made available to and from userland. 
-     </para>
-
-     <para>
-       fb_info defines the current state of a particular video card. 
-       Inside fb_info, there exists a fb_ops structure which is a 
-       collection of needed functions to make fbdev and fbcon work.
-       fb_info is only visible to the kernel.
-     </para>
-
-     <para>
-       fb_var_screeninfo is used to describe the features of a video card 
-       that are user defined.  With fb_var_screeninfo, things such as
-       depth and the resolution may be defined.
-     </para>
-
-     <para>
-       The next structure is fb_fix_screeninfo. This defines the 
-       properties of a card that are created when a mode is set and can't 
-       be changed otherwise.  A good example of this is the start of the 
-       frame buffer memory.  This "locks" the address of the frame buffer
-       memory, so that it cannot be changed or moved.
-     </para>
-
-     <para>
-       The last structure is fb_monospecs. In the old API, there was 
-       little importance for fb_monospecs. This allowed for forbidden things 
-       such as setting a mode of 800x600 on a fix frequency monitor. With 
-       the new API, fb_monospecs prevents such things, and if used 
-       correctly, can prevent a monitor from being cooked.  fb_monospecs
-       will not be useful until kernels 2.5.x.
-     </para>
-
-     <sect1><title>Frame Buffer Memory</title>
-!Edrivers/video/fbmem.c
-     </sect1>
-<!--
-     <sect1><title>Frame Buffer Console</title>
-X!Edrivers/video/console/fbcon.c
-     </sect1>
--->
-     <sect1><title>Frame Buffer Colormap</title>
-!Edrivers/video/fbcmap.c
-     </sect1>
-<!-- FIXME:
-  drivers/video/fbgen.c has no docs, which stuffs up the sgml.  Comment
-  out until somebody adds docs.  KAO
-     <sect1><title>Frame Buffer Generic Functions</title>
-X!Idrivers/video/fbgen.c
-     </sect1>
-KAO -->
-     <sect1><title>Frame Buffer Video Mode Database</title>
-!Idrivers/video/modedb.c
-!Edrivers/video/modedb.c
-     </sect1>
-     <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
-!Edrivers/video/macmodes.c
-     </sect1>
-     <sect1><title>Frame Buffer Fonts</title>
-        <para>
-           Refer to the file drivers/video/console/fonts.c for more information.
-        </para>
-<!-- FIXME: Removed for now since no structured comments in source
-X!Idrivers/video/console/fonts.c
--->
-     </sect1>
-  </chapter>
-
-  <chapter id="input_subsystem">
-     <title>Input Subsystem</title>
-!Iinclude/linux/input.h
-!Edrivers/input/input.c
-!Edrivers/input/ff-core.c
-!Edrivers/input/ff-memless.c
-  </chapter>
-
-  <chapter id="spi">
-      <title>Serial Peripheral Interface (SPI)</title>
-  <para>
-       SPI is the "Serial Peripheral Interface", widely used with
-       embedded systems because it is a simple and efficient
-       interface:  basically a multiplexed shift register.
-       Its three signal wires hold a clock (SCK, often in the range
-       of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
-       a "Master In, Slave Out" (MISO) data line.
-       SPI is a full duplex protocol; for each bit shifted out the
-       MOSI line (one per clock) another is shifted in on the MISO line.
-       Those bits are assembled into words of various sizes on the
-       way to and from system memory.
-       An additional chipselect line is usually active-low (nCS);
-       four signals are normally used for each peripheral, plus
-       sometimes an interrupt.
-  </para>
-  <para>
-       The SPI bus facilities listed here provide a generalized
-       interface to declare SPI busses and devices, manage them
-       according to the standard Linux driver model, and perform
-       input/output operations.
-       At this time, only "master" side interfaces are supported,
-       where Linux talks to SPI peripherals and does not implement
-       such a peripheral itself.
-       (Interfaces to support implementing SPI slaves would
-       necessarily look different.)
-  </para>
-  <para>
-       The programming interface is structured around two kinds of driver,
-       and two kinds of device.
-       A "Controller Driver" abstracts the controller hardware, which may
-       be as simple as a set of GPIO pins or as complex as a pair of FIFOs
-       connected to dual DMA engines on the other side of the SPI shift
-       register (maximizing throughput).  Such drivers bridge between
-       whatever bus they sit on (often the platform bus) and SPI, and
-       expose the SPI side of their device as a
-       <structname>struct spi_master</structname>.
-       SPI devices are children of that master, represented as a
-       <structname>struct spi_device</structname> and manufactured from
-       <structname>struct spi_board_info</structname> descriptors which
-       are usually provided by board-specific initialization code.
-       A <structname>struct spi_driver</structname> is called a
-       "Protocol Driver", and is bound to a spi_device using normal
-       driver model calls.
-  </para>
-  <para>
-       The I/O model is a set of queued messages.  Protocol drivers
-       submit one or more <structname>struct spi_message</structname>
-       objects, which are processed and completed asynchronously.
-       (There are synchronous wrappers, however.)  Messages are
-       built from one or more <structname>struct spi_transfer</structname>
-       objects, each of which wraps a full duplex SPI transfer.
-       A variety of protocol tweaking options are needed, because
-       different chips adopt very different policies for how they
-       use the bits transferred with SPI.
-  </para>
-!Iinclude/linux/spi/spi.h
-!Fdrivers/spi/spi.c spi_register_board_info
-!Edrivers/spi/spi.c
-  </chapter>
-
-  <chapter id="i2c">
-     <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
-
-     <para>
-       I<superscript>2</superscript>C (or without fancy typography, "I2C")
-       is an acronym for the "Inter-IC" bus, a simple bus protocol which is
-       widely used where low data rate communications suffice.
-       Since it's also a licensed trademark, some vendors use another
-       name (such as "Two-Wire Interface", TWI) for the same bus.
-       I2C only needs two signals (SCL for clock, SDA for data), conserving
-       board real estate and minimizing signal quality issues.
-       Most I2C devices use seven bit addresses, and bus speeds of up
-       to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
-       found wide use.
-       I2C is a multi-master bus; open drain signaling is used to
-       arbitrate between masters, as well as to handshake and to
-       synchronize clocks from slower clients.
-     </para>
-
-     <para>
-       The Linux I2C programming interfaces support only the master
-       side of bus interactions, not the slave side.
-       The programming interface is structured around two kinds of driver,
-       and two kinds of device.
-       An I2C "Adapter Driver" abstracts the controller hardware; it binds
-       to a physical device (perhaps a PCI device or platform_device) and
-       exposes a <structname>struct i2c_adapter</structname> representing
-       each I2C bus segment it manages.
-       On each I2C bus segment will be I2C devices represented by a
-       <structname>struct i2c_client</structname>.  Those devices will
-       be bound to a <structname>struct i2c_driver</structname>,
-       which should follow the standard Linux driver model.
-       (At this writing, a legacy model is more widely used.)
-       There are functions to perform various I2C protocol operations; at
-       this writing all such functions are usable only from task context.
-     </para>
-
-     <para>
-       The System Management Bus (SMBus) is a sibling protocol.  Most SMBus
-       systems are also I2C conformant.  The electrical constraints are
-       tighter for SMBus, and it standardizes particular protocol messages
-       and idioms.  Controllers that support I2C can also support most
-       SMBus operations, but SMBus controllers don't support all the protocol
-       options that an I2C controller will.
-       There are functions to perform various SMBus protocol operations,
-       either using I2C primitives or by issuing SMBus commands to
-       i2c_adapter devices which don't support those I2C operations.
-     </para>
-
-!Iinclude/linux/i2c.h
-!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
-!Edrivers/i2c/i2c-core.c
-  </chapter>
-
   <chapter id="clk">
      <title>Clock Framework</title>
 
index 9a07e38..6bd5f37 100644 (file)
@@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver.
 
 int pcie_port_service_register(struct pcie_port_service_driver *new)
 
-This API replaces the Linux Driver Model's pci_module_init API. A
+This API replaces the Linux Driver Model's pci_register_driver API. A
 service driver should always calls pcie_port_service_register at
 module init. Note that after service driver being loaded, calls
 such as pci_enable_device(dev) and pci_set_master(dev) are no longer
index 6e25340..accfe2f 100644 (file)
@@ -298,3 +298,15 @@ over a rather long period of time, but improvements are always welcome!
 
        Note that, rcu_assign_pointer() and rcu_dereference() relate to
        SRCU just as they do to other forms of RCU.
+
+15.    The whole point of call_rcu(), synchronize_rcu(), and friends
+       is to wait until all pre-existing readers have finished before
+       carrying out some otherwise-destructive operation.  It is
+       therefore critically important to -first- remove any path
+       that readers can follow that could be affected by the
+       destructive operation, and -only- -then- invoke call_rcu(),
+       synchronize_rcu(), or friends.
+
+       Because these primitives only wait for pre-existing readers,
+       it is the caller's responsibility to guarantee safety to
+       any subsequent readers.
index d9e5d6f..93feb84 100644 (file)
@@ -252,10 +252,8 @@ cgroup file system directories.
 When a task is moved from one cgroup to another, it gets a new
 css_set pointer - if there's an already existing css_set with the
 desired collection of cgroups then that group is reused, else a new
-css_set is allocated. Note that the current implementation uses a
-linear search to locate an appropriate existing css_set, so isn't
-very efficient. A future version will use a hash table for better
-performance.
+css_set is allocated. The appropriate existing css_set is located by
+looking into a hash table.
 
 To allow access from a cgroup to the css_sets (and hence tasks)
 that comprise it, a set of cg_cgroup_link objects form a lattice;
index 5c86c25..0611e95 100644 (file)
@@ -142,7 +142,7 @@ into the rest of the kernel, none in performance critical paths:
  - in fork and exit, to attach and detach a task from its cpuset.
  - in sched_setaffinity, to mask the requested CPUs by what's
    allowed in that tasks cpuset.
- - in sched.c migrate_all_tasks(), to keep migrating tasks within
+ - in sched.c migrate_live_tasks(), to keep migrating tasks within
    the CPUs allowed by their cpuset, if possible.
  - in the mbind and set_mempolicy system calls, to mask the requested
    Memory Nodes by what's allowed in that tasks cpuset.
@@ -175,6 +175,10 @@ files describing that cpuset:
  - mem_exclusive flag: is memory placement exclusive?
  - mem_hardwall flag:  is memory allocation hardwalled
  - memory_pressure: measure of how much paging pressure in cpuset
+ - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - sched_relax_domain_level: the searching range when migrating tasks
 
 In addition, the root cpuset only has the following file:
  - memory_pressure_enabled flag: compute memory_pressure?
@@ -252,7 +256,7 @@ is causing.
 
 This is useful both on tightly managed systems running a wide mix of
 submitted jobs, which may choose to terminate or re-prioritize jobs that
-are trying to use more memory than allowed on the nodes assigned them,
+are trying to use more memory than allowed on the nodes assigned to them,
 and with tightly coupled, long running, massively parallel scientific
 computing jobs that will dramatically fail to meet required performance
 goals if they start to use more memory than allowed to them.
@@ -378,7 +382,7 @@ as cpusets and sched_setaffinity.
 The algorithmic cost of load balancing and its impact on key shared
 kernel data structures such as the task list increases more than
 linearly with the number of CPUs being balanced.  So the scheduler
-has support to  partition the systems CPUs into a number of sched
+has support to partition the systems CPUs into a number of sched
 domains such that it only load balances within each sched domain.
 Each sched domain covers some subset of the CPUs in the system;
 no two sched domains overlap; some CPUs might not be in any sched
@@ -485,17 +489,22 @@ of CPUs allowed to a cpuset having 'sched_load_balance' enabled.
 The internal kernel cpuset to scheduler interface passes from the
 cpuset code to the scheduler code a partition of the load balanced
 CPUs in the system. This partition is a set of subsets (represented
-as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all
-the CPUs that must be load balanced.
-
-Whenever the 'sched_load_balance' flag changes, or CPUs come or go
-from a cpuset with this flag enabled, or a cpuset with this flag
-enabled is removed, the cpuset code builds a new such partition and
-passes it to the scheduler sched domain setup code, to have the sched
-domains rebuilt as necessary.
+as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
+all the CPUs that must be load balanced.
+
+The cpuset code builds a new such partition and passes it to the
+scheduler sched domain setup code, to have the sched domains rebuilt
+as necessary, whenever:
+ - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - or CPUs come or go from a cpuset with this flag enabled,
+ - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+   and with this flag enabled changes,
+ - or a cpuset with non-empty CPUs and with this flag enabled is removed,
+ - or a cpu is offlined/onlined.
 
 This partition exactly defines what sched domains the scheduler should
-setup - one sched domain for each element (cpumask_t) in the partition.
+setup - one sched domain for each element (struct cpumask) in the
+partition.
 
 The scheduler remembers the currently active sched domain partitions.
 When the scheduler routine partition_sched_domains() is invoked from
@@ -559,7 +568,7 @@ domain, the largest value among those is used.  Be careful, if one
 requests 0 and others are -1 then 0 is used.
 
 Note that modifying this file will have both good and bad effects,
-and whether it is acceptable or not will be depend on your situation.
+and whether it is acceptable or not depends on your situation.
 Don't modify this file if you are not sure.
 
 If your situation is:
@@ -600,19 +609,15 @@ to allocate a page of memory for that task.
 
 If a cpuset has its 'cpus' modified, then each task in that cpuset
 will have its allowed CPU placement changed immediately.  Similarly,
-if a tasks pid is written to a cpusets 'tasks' file, in either its
-current cpuset or another cpuset, then its allowed CPU placement is
-changed immediately.  If such a task had been bound to some subset
-of its cpuset using the sched_setaffinity() call, the task will be
-allowed to run on any CPU allowed in its new cpuset, negating the
-affect of the prior sched_setaffinity() call.
+if a tasks pid is written to another cpusets 'tasks' file, then its
+allowed CPU placement is changed immediately.  If such a task had been
+bound to some subset of its cpuset using the sched_setaffinity() call,
+the task will be allowed to run on any CPU allowed in its new cpuset,
+negating the effect of the prior sched_setaffinity() call.
 
 In summary, the memory placement of a task whose cpuset is changed is
 updated by the kernel, on the next allocation of a page for that task,
-but the processor placement is not updated, until that tasks pid is
-rewritten to the 'tasks' file of its cpuset.  This is done to avoid
-impacting the scheduler code in the kernel with a check for changes
-in a tasks processor placement.
+and the processor placement is updated immediately.
 
 Normally, once a page is allocated (given a physical page
 of main memory) then that page stays on whatever node it
@@ -681,10 +686,14 @@ and then start a subshell 'sh' in that cpuset:
   # The next line should display '/Charlie'
   cat /proc/self/cpuset
 
-In the future, a C library interface to cpusets will likely be
-available.  For now, the only way to query or modify cpusets is
-via the cpuset file system, using the various cd, mkdir, echo, cat,
-rmdir commands from the shell, or their equivalent from C.
+There are ways to query or modify cpusets:
+ - via the cpuset file system directly, using the various cd, mkdir, echo,
+   cat, rmdir commands from the shell, or their equivalent from C.
+ - via the C library libcpuset.
+ - via the C library libcgroup.
+   (http://sourceforge.net/proects/libcg/)
+ - via the python application cset.
+   (http://developer.novell.com/wiki/index.php/Cpuset)
 
 The sched_setaffinity calls can also be done at the shell prompt using
 SGI's runon or Robert Love's taskset.  The mbind and set_mempolicy
@@ -756,7 +765,7 @@ mount -t cpuset X /dev/cpuset
 
 is equivalent to
 
-mount -t cgroup -ocpuset X /dev/cpuset
+mount -t cgroup -ocpuset,noprefix X /dev/cpuset
 echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
 
 2.2 Adding/removing cpus
index be7af14..6977c17 100644 (file)
@@ -137,7 +137,7 @@ static void cn_test_timer_func(unsigned long __data)
 
                memcpy(m + 1, data, m->len);
 
-               cn_netlink_send(m, 0, gfp_any());
+               cn_netlink_send(m, 0, GFP_ATOMIC);
                kfree(m);
        }
 
@@ -160,10 +160,8 @@ static int cn_test_init(void)
                goto err_out;
        }
 
-       init_timer(&cn_test_timer);
-       cn_test_timer.function = cn_test_timer_func;
+       setup_timer(&cn_test_timer, cn_test_timer_func, 0);
        cn_test_timer.expires = jiffies + HZ;
-       cn_test_timer.data = 0;
        add_timer(&cn_test_timer);
 
        return 0;
index e3443dd..917918f 100644 (file)
@@ -195,19 +195,3 @@ scaling_setspeed.          By "echoing" a new frequency into this
                                you can change the speed of the CPU,
                                but only within the limits of
                                scaling_min_freq and scaling_max_freq.
-                               
-
-3.2 Deprecated Interfaces
--------------------------
-
-Depending on your kernel configuration, you might find the following 
-cpufreq-related files:
-/proc/cpufreq
-/proc/sys/cpu/*/speed
-/proc/sys/cpu/*/speed-min
-/proc/sys/cpu/*/speed-max
-
-These are files for deprecated interfaces to cpufreq, which offer far
-less functionality. Because of this, these interfaces aren't described
-here.
-
index a05ec50..a7cbfff 100644 (file)
@@ -127,9 +127,11 @@ void unlock_device(struct device * dev);
 Attributes
 ~~~~~~~~~~
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device * dev, const char * buf, size_t count, loff_t off);
+       struct attribute        attr;
+       ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+                       char *buf);
+       ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+                        const char *buf, size_t count);
 };
 
 Attributes of devices can be exported via drivers using a simple
diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop
deleted file mode 100644 (file)
index 5515469..0000000
+++ /dev/null
@@ -1,205 +0,0 @@
-This README escorted the skystar2-driver rewriting procedure. It describes the
-state of the new flexcop-driver set and some internals are written down here
-too.
-
-This document hopefully describes things about the flexcop and its
-device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
-drivers based on the skystar2.c and other information.
-
-Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
-touched and rewritten.
-
-History & News
-==============
-  2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
-
-
-
-
-General coding processing
-=========================
-
-We should proceed as follows (as long as no one complains):
-
-0) Think before start writing code!
-
-1) rewriting the skystar2.c with the help of the flexcop register descriptions
-and splitting up the files to a pci-bus-part and a flexcop-part.
-The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
-device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
-
-2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
-and other pci drivers)
-
-3) make some beautification (see 'Improvements when rewriting (refactoring) is
-done')
-
-4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
-a wider tester audience.
-
-5) creating an usb-bus-part using the already written flexcop code for the pci
-card.
-
-Idea: create a kernel-object for the flexcop and export all important
-functions. This option saves kernel-memory, but maybe a lot of functions have
-to be exported to kernel namespace.
-
-
-Current situation
-=================
-
-0) Done :)
-1) Done (some minor issues left)
-2) Done
-3) Not ready yet, more information is necessary
-4) next to be done (see the table below)
-5) USB driver is working (yes, there are some minor issues)
-
-What seems to be ready?
------------------------
-
-1) Rewriting
-1a) i2c is cut off from the flexcop-pci.c and seems to work
-1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1e) eeprom (reading MAC address)
-1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
-1f) misc. register accesses for reading parameters (e.g. resetting, revision)
-1g) pid/mac filter (flexcop-hw-filter.c)
-1i) dvb-stuff initialization in flexcop.c (done)
-1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
-1j) remove flexcop initialization from flexcop-pci.c completely (done)
-1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
-1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
-non-static where possible, moved code to proper places)
-
-2) Search for errors in the leftover of flexcop-pci.c (partially done)
-5a) add MAC address reading
-5c) feeding of ISOC data to the software demux (format of the isochronous data
-and speed optimization, no real error) (thanks to Vadim Catana)
-
-What to do in the near future?
---------------------------------------
-(no special order here)
-
-5) USB driver
-5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
-
-Testing changes
----------------
-
-O             = item is working
-P             = item is partially working
-X             = item is not working
-N             = item does not apply here
-<empty field> = item need to be examined
-
-       | PCI                               | USB
-item   | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
--------+-------+---------+---------+-------+-------+---------+---------+-------
-1a)    | O     |         |         |       | N     | N       | N       | N
-1b)    | O     |         |         |       |       |         | O       |
-1c)    | N     | N       |         |       | N     | N       | O       |
-1d)    |                 O                 |                 O
-1e)    |                 O                 |                 O
-1f)    |                                   P
-1g)    |                                   O
-1h)    |                 P                 |
-1i)    |                 O                 |                 N
-1j)    |                 O                 |                 N
-1l)    |                 O                 |                 N
-2)     |                 O                 |                 N
-5a)    |                 N                 |                 O
-5b)*   |                 N                 |
-5c)    |                 N                 |                 O
-
-* - not done yet
-
-Known bugs and problems and TODO
---------------------------------
-
-1g/h/l) when pid filtering is enabled on the pci card
-
-DMA usage currently:
-  The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
-  address and triggers an IRQ when it's full and starts writing to the second
-  address. When the second address is full, the IRQ is triggered again, and
-  the flexcop writes to first address again, and so on.
-  The buffersize of each address is currently 640*188 bytes.
-
-  Problem is, when using hw-pid-filtering and doing some low-bandwidth
-  operation (like scanning) the buffers won't be filled enough to trigger
-  the IRQ. That's why:
-
-  When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
-  is triggered.  Is the current write address of DMA1 different to the one
-  during the last IRQ, then the data is passed to the demuxer.
-
-  There is an additional DMA-IRQ-method: packet count IRQ. This isn't
-  implemented correctly yet.
-
-  The solution is to disable HW PID filtering, but I don't know how the DVB
-  API software demux behaves on slow systems with 45MBit/s TS.
-
-Solved bugs :)
---------------
-1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
-working)
-SOLUTION: also index 0 was affected, because net_translation is done for
-these indexes by default
-
-5b) isochronous transfer does only work in the first attempt (for the Sky2PC
-USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
-woke up again (don't know if this need fixes, see
-flexcop-fe-tuner.c:flexcop_sleep)
-
-NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
-anything in the while the driver is loaded the first time), no transfers take
-place anymore.
-
-Improvements when rewriting (refactoring) is done
-=================================================
-
-- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
-  (enable sleeping for other demods than dvb-s)
-- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
-
-Debugging
----------
-- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
-  with this flexcop, this is important, because i2c is now using the
-  flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
-  that, please tell us so).
-
-Everything which is identical in the following table, can be put into a common
-flexcop-module.
-
-                 PCI                  USB
--------------------------------------------------------------------------------
-Different:
-Register access:  accessing IO memory  USB control message
-I2C bus:          I2C bus of the FC    USB control message
-Data transfer:    DMA                  isochronous transfer
-EEPROM transfer:  through i2c bus      not clear yet
-
-Identical:
-Streaming:                 accessing registers
-PID Filtering:             accessing registers
-Sram destinations:         accessing registers
-Tuner/Demod:                     I2C bus
-DVB-stuff:            can be written for common use
-
-Acknowledgements (just for the rewriting part)
-================
-
-Bjarne Steinsbo thought a lot in the first place of the pci part for this code
-sharing idea.
-
-Andreas Oberritter for providing a recent PCI initialization template
-(pluto2.c).
-
-Boleslaw Ciesielski for pointing out a problem with firmware loader.
-
-Vadim Catana for correcting the USB transfer.
-
-comments, critics and ideas to linux-dvb@linuxtv.org.
index cdf6ee4..3f435ff 100644 (file)
@@ -1,5 +1,5 @@
-How to set up the Technisat devices
-===================================
+How to set up the Technisat/B2C2 Flexcop devices
+================================================
 
 1) Find out what device you have
 ================================
@@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)...
 
 If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
 "Multimedia devices" => "Customise analog and hybrid tuner modules to build"
-In this directory uncheck every driver which is activated there.
+In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
 
 Then please activate:
 2a) Main module part:
 
 a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
-b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
+b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
+OR
 c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
 d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
 Notice: d.) is helpful for troubleshooting
 
 2b) Frontend module part:
 
-1.) Revision 2.3:
+1.) SkyStar DVB-S Revision 2.3:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
 
-2.) Revision 2.6:
+2.) SkyStar DVB-S Revision 2.6:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
 
-3.) Revision 2.7:
+3.) SkyStar DVB-S Revision 2.7:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
 c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
 d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
 
-4.) Revision 2.8:
+4.) SkyStar DVB-S Revision 2.8:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
 c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
 d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
 
-5.) DVB-T card:
+5.) AirStar DVB-T card:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
 
-6.) DVB-C card:
+6.) CableStar DVB-C card:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
 
-7.) ATSC card 1st generation:
+7.) AirStar ATSC card 1st generation:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
 
-8.) ATSC card 2nd generation:
+8.) AirStar ATSC card 2nd generation:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
-c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
 
-Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
+9.) AirStar ATSC card 3rd generation:
+a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
+
+Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009
index 5ddbe35..20d3b94 100644 (file)
@@ -335,3 +335,12 @@ Why:       In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
        Secmark, it is time to deprecate the older mechanism and start the
        process of removing the old code.
 Who:   Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What:  sysfs ui for changing p4-clockmod parameters
+When:  September 2009
+Why:   See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+       e088e4c9cdb618675874becb91b2fd581ee707e6.
+       Removal is subject to fixing any remaining bugs in ACPI which may
+       cause the thermal throttling not to happen at the right time.
+Who:   Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
index 3e79e4a..b324c03 100644 (file)
@@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs:
 
                                Squashfs                Cramfs
 
-Max filesystem size:           2^64                    16 MiB
+Max filesystem size:           2^64                    256 MiB
 Max file size:                 ~ 2 TiB                 16 MiB
 Max files:                     unlimited               unlimited
 Max directories:               unlimited               unlimited
index 68ef488..9f8740c 100644 (file)
@@ -9,6 +9,7 @@ that support it.  For example, a given bus might look like this:
      |   |-- class
      |   |-- config
      |   |-- device
+     |   |-- enable
      |   |-- irq
      |   |-- local_cpus
      |   |-- resource
@@ -32,6 +33,7 @@ files, each with their own function.
        class              PCI class (ascii, ro)
        config             PCI config space (binary, rw)
        device             PCI device (ascii, ro)
+       enable             Whether the device is enabled (ascii, rw)
        irq                IRQ number (ascii, ro)
        local_cpus         nearby CPU mask (cpumask, ro)
        resource                   PCI resource host addresses (ascii, ro)
@@ -57,10 +59,19 @@ used to do actual device programming from userspace.  Note that some platforms
 don't support mmapping of certain resources, so be sure to check the return
 value from any attempted mmap.
 
+The 'enable' file provides a counter that indicates how many times the device 
+has been enabled.  If the 'enable' file currently returns '4', and a '1' is
+echoed into it, it will then return '5'.  Echoing a '0' into it will decrease
+the count.  Even when it returns to 0, though, some of the initialisation
+may not be reversed.  
+
 The 'rom' file is special in that it provides read-only access to the device's
 ROM file, if available.  It's disabled by default, however, so applications
 should write the string "1" to the file to enable it before attempting a read
-call, and disable it following the access by writing "0" to the file.
+call, and disable it following the access by writing "0" to the file.  Note
+that the device must be enabled for a rom read to return data succesfully.
+In the event a driver is not bound to the device, it can be enabled using the
+'enable' file, documented above.
 
 Accessing legacy resources through sysfs
 ----------------------------------------
index 9e9c348..7e81e37 100644 (file)
@@ -2,8 +2,10 @@
 sysfs - _The_ filesystem for exporting kernel objects. 
 
 Patrick Mochel <mochel@osdl.org>
+Mike Murphy <mamurph@cs.clemson.edu>
 
-10 January 2003
+Revised:    22 February 2009
+Original:   10 January 2003
 
 
 What it is:
@@ -64,12 +66,13 @@ An attribute definition is simply:
 
 struct attribute {
         char                    * name;
+        struct module          *owner;
         mode_t                  mode;
 };
 
 
-int sysfs_create_file(struct kobject * kobj, struct attribute * attr);
-void sysfs_remove_file(struct kobject * kobj, struct attribute * attr);
+int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
+void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
 
 
 A bare attribute contains no means to read or write the value of the
@@ -80,9 +83,11 @@ a specific object type.
 For example, the driver model defines struct device_attribute like:
 
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+       struct attribute        attr;
+       ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+                       char *buf);
+       ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+                        const char *buf, size_t count);
 };
 
 int device_create_file(struct device *, struct device_attribute *);
@@ -90,12 +95,8 @@ void device_remove_file(struct device *, struct device_attribute *);
 
 It also defines this helper for defining device attributes: 
 
-#define DEVICE_ATTR(_name, _mode, _show, _store)      \
-struct device_attribute dev_attr_##_name = {            \
-        .attr = {.name  = __stringify(_name) , .mode   = _mode },      \
-        .show   = _show,                                \
-        .store  = _store,                               \
-};
+#define DEVICE_ATTR(_name, _mode, _show, _store) \
+struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
 
 For example, declaring
 
@@ -107,9 +108,9 @@ static struct device_attribute dev_attr_foo = {
        .attr   = {
                .name = "foo",
                .mode = S_IWUSR | S_IRUGO,
+               .show = show_foo,
+               .store = store_foo,
        },
-       .show = show_foo,
-       .store = store_foo,
 };
 
 
@@ -161,10 +162,12 @@ To read or write attributes, show() or store() methods must be
 specified when declaring the attribute. The method types should be as
 simple as those defined for device attributes:
 
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+ssize_t (*show)(struct device * dev, struct device_attribute * attr,
+                char * buf);
+ssize_t (*store)(struct device * dev, struct device_attribute * attr,
+                 const char * buf);
 
-IOW, they should take only an object and a buffer as parameters. 
+IOW, they should take only an object, an attribute, and a buffer as parameters.
 
 
 sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
@@ -299,14 +302,16 @@ The following interface layers currently exist in sysfs:
 Structure:
 
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+       struct attribute        attr;
+       ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+                       char *buf);
+       ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+                        const char *buf, size_t count);
 };
 
 Declaring:
 
-DEVICE_ATTR(_name, _str, _mode, _show, _store);
+DEVICE_ATTR(_name, _mode, _show, _store);
 
 Creation/Removal:
 
@@ -342,7 +347,8 @@ Structure:
 struct driver_attribute {
         struct attribute        attr;
         ssize_t (*show)(struct device_driver *, char * buf);
-        ssize_t (*store)(struct device_driver *, const char * buf);
+        ssize_t (*store)(struct device_driver *, const char * buf,
+                         size_t count);
 };
 
 Declaring:
diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c
new file mode 100644 (file)
index 0000000..bbea1cc
--- /dev/null
@@ -0,0 +1,101 @@
+/* Disk protection for HP machines.
+ *
+ * Copyright 2008 Eric Piel
+ * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ *
+ * GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <signal.h>
+
+void write_int(char *path, int i)
+{
+       char buf[1024];
+       int fd = open(path, O_RDWR);
+       if (fd < 0) {
+               perror("open");
+               exit(1);
+       }
+       sprintf(buf, "%d", i);
+       if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+               perror("write");
+               exit(1);
+       }
+       close(fd);
+}
+
+void set_led(int on)
+{
+       write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+}
+
+void protect(int seconds)
+{
+       write_int("/sys/block/sda/device/unload_heads", seconds*1000);
+}
+
+int on_ac(void)
+{
+//     /sys/class/power_supply/AC0/online
+}
+
+int lid_open(void)
+{
+//     /proc/acpi/button/lid/LID/state
+}
+
+void ignore_me(void)
+{
+       protect(0);
+       set_led(0);
+
+}
+
+int main(int argc, char* argv[])
+{
+       int fd, ret;
+
+       fd = open("/dev/freefall", O_RDONLY);
+       if (fd < 0) {
+               perror("open");
+               return EXIT_FAILURE;
+       }
+
+       signal(SIGALRM, ignore_me);
+
+       for (;;) {
+              unsigned char count;
+
+               ret = read(fd, &count, sizeof(count));
+              alarm(0);
+              if ((ret == -1) && (errno == EINTR)) {
+                      /* Alarm expired, time to unpark the heads */
+                      continue;
+              }
+
+               if (ret != sizeof(count)) {
+                       perror("read");
+                       break;
+               }
+
+              protect(21);
+              set_led(1);
+              if (1 || on_ac() || lid_open()) {
+                      alarm(2);
+              } else {
+                      alarm(20);
+              }
+       }
+
+       close(fd);
+       return EXIT_SUCCESS;
+}
index 0fcfc4a..287f8c9 100644 (file)
@@ -33,6 +33,14 @@ rate - reports the sampling rate of the accelerometer device in HZ
 This driver also provides an absolute input class device, allowing
 the laptop to act as a pinball machine-esque joystick.
 
+Another feature of the driver is misc device called "freefall" that
+acts similar to /dev/rtc and reacts on free-fall interrupts received
+from the device. It supports blocking operations, poll/select and
+fasync operation modes. You must read 1 bytes from the device.  The
+result is number of free-fall interrupts since the last successful
+read (or 255 if number of interrupts would not fit).
+
+
 Axes orientation
 ----------------
 
index d73fbd2..026ec7d 100644 (file)
@@ -43,7 +43,8 @@ Only comments so marked will be considered by the kernel-doc scripts,
 and any comment so marked must be in kernel-doc format.  Do not use
 "/**" to be begin a comment block unless the comment block contains
 kernel-doc formatted comments.  The closing comment marker for
-kernel-doc comments can be either "*/" or "**/".
+kernel-doc comments can be either "*/" or "**/", but "*/" is
+preferred in the Linux kernel tree.
 
 Kernel-doc comments should be placed just before the function
 or data structure being described.
@@ -63,7 +64,7 @@ Example kernel-doc function comment:
  * comment lines.
  *
  * The longer description can have multiple paragraphs.
- **/
+ */
 
 The first line, with the short description, must be on a single line.
 
@@ -85,7 +86,7 @@ Example kernel-doc data structure comment.
  *             perhaps with more lines and words.
  *
  * Longer description of this structure.
- **/
+ */
 
 The kernel-doc function comments describe each parameter to the
 function, in order, with the @name lines.
index d8362cf..54f21a5 100644 (file)
@@ -114,7 +114,7 @@ In addition, the following text indicates that the option:
 Parameters denoted with BOOT are actually interpreted by the boot
 loader, and have no meaning to the kernel directly.
 Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/i386/boot.txt>.
+need or coordination with <Documentation/x86/boot.txt>.
 
 There are also arch-specific kernel-parameters not documented here.
 See for example <Documentation/x86/x86_64/boot-options.txt>.
@@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
        acpi=           [HW,ACPI,X86-64,i386]
                        Advanced Configuration and Power Interface
-                       Format: { force | off | ht | strict | noirq }
+                       Format: { force | off | ht | strict | noirq | rsdt }
                        force -- enable ACPI if default was off
                        off -- disable ACPI if default was on
                        noirq -- do not use ACPI for IRQ routing
@@ -868,8 +868,10 @@ and is between 256 and 4096 characters. It is defined in the file
        icn=            [HW,ISDN]
                        Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
 
-       ide=            [HW] (E)IDE subsystem
-                       Format: ide=nodma or ide=doubler
+       ide-core.nodma= [HW] (E)IDE subsystem
+                       Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
+                       .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
+                       .chs .ignore_cable are additional options
                        See Documentation/ide/ide.txt.
 
        idebus=         [HW] (E)IDE subsystem - VLB/PCI bus speed
@@ -937,6 +939,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 
        intel_iommu=    [DMAR] Intel IOMMU driver (DMAR) option
+               on
+                       Enable intel iommu driver.
                off
                        Disable intel iommu driver.
                igfx_off [Default Off]
@@ -2447,7 +2451,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        See Documentation/fb/modedb.txt.
 
        vga=            [BOOT,X86-32] Select a particular video mode
-                       See Documentation/x86/i386/boot.txt and
+                       See Documentation/x86/boot.txt and
                        Documentation/svga.txt.
                        Use vga=ask for menu.
                        This is actually a boot loader parameter; the value is
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
new file mode 100644 (file)
index 0000000..268e5c1
--- /dev/null
@@ -0,0 +1,35 @@
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+       Specifies whether to load the IPv6 module, but disable all
+       its functionality.  This might be used when another module
+       has a dependency on the IPv6 module being loaded, but no
+       IPv6 addresses or operations are desired.
+
+       The possible values and their effects are:
+
+       0
+               IPv6 is enabled.
+
+               This is the default value.
+
+       1
+               IPv6 is disabled.
+
+               No IPv6 addresses will be added to interfaces, and
+               it will not be possible to open an IPv6 socket.
+
+               A reboot is required to enable IPv6.
+
index 8141fa0..7ac8032 100644 (file)
@@ -4,7 +4,7 @@ Introduction
 ============
 
 The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
-series of products) supports iSCSI acceleration and iSCSI Direct Data Placement
+series of products) support iSCSI acceleration and iSCSI Direct Data Placement
 (DDP) where the hardware handles the expensive byte touching operations, such
 as CRC computation and verification, and direct DMA to the final host memory
 destination:
@@ -31,9 +31,9 @@ destination:
          the TCP segments onto the wire. It handles TCP retransmission if
          needed.
 
-         On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP
+         On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
          segments, separating the header and data, calculating and verifying
-         the digests, then forwards the header to the host. The payload data,
+         the digests, then forwarding the header to the host. The payload data,
          if possible, will be directly placed into the pre-posted host DDP
          buffer. Otherwise, the payload data will be sent to the host too.
 
@@ -68,9 +68,8 @@ The following steps need to be taken to accelerates the open-iscsi initiator:
        sure the ip address is unique in the network.
 
 3. edit /etc/iscsi/iscsid.conf
-   The default setting for MaxRecvDataSegmentLength (131072) is too big,
-   replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no
-   bigger than 15360 (for example 8192):
+   The default setting for MaxRecvDataSegmentLength (131072) is too big;
+   replace with a value no bigger than 15360 (for example 8192):
 
        node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
 
index cde23b4..5731c67 100644 (file)
@@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
 events were lost, the trace is incomplete. You should enlarge the buffers and
 try again. Buffers are enlarged by first seeing how large the current buffers
 are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
 gives you a number. Approximately double this number and write it back, for
 instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also
index 799f9d8..9633fb0 100644 (file)
@@ -692,6 +692,13 @@ M: kernel@wantstofly.org
 L:     linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:     Maintained
 
+ARM/NUVOTON W90X900 ARM ARCHITECTURE
+P:      Wan ZongShun
+M:      mcuos.com@gmail.com
+L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W:      http://www.mcuos.com
+S:      Maintained
+
 ARPD SUPPORT
 P:     Jonathan Layes
 L:     netdev@vger.kernel.org
@@ -1202,6 +1209,8 @@ S:        Supported
 CONTROL GROUPS (CGROUPS)
 P:     Paul Menage
 M:     menage@google.com
+P:     Li Zefan
+M:     lizf@cn.fujitsu.com
 L:     containers@lists.linux-foundation.org
 S:     Maintained
 
@@ -1903,10 +1912,10 @@ W:      http://gigaset307x.sourceforge.net/
 S:     Maintained
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P:     Robert Love
-M:     rlove@rlove.org
-M:     linux-kernel@vger.kernel.org
-W:     http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
+P:     Frank Seidel
+M:     frank@f-seidel.de
+L:     lm-sensors@lm-sensors.org
+W:     http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:     Maintained
 
 GSPCA FINEPIX SUBDRIVER
@@ -1999,7 +2008,7 @@ S:        Maintained
 
 HIBERNATION (aka Software Suspend, aka swsusp)
 P:     Pavel Machek
-M:     pavel@suse.cz
+M:     pavel@ucw.cz
 P:     Rafael J. Wysocki
 M:     rjw@sisk.pl
 L:     linux-pm@lists.linux-foundation.org
@@ -2455,7 +2464,7 @@ S:        Maintained
 
 ISDN SUBSYSTEM
 P:     Karsten Keil
-M:     kkeil@suse.de
+M:     isdn@linux-pingi.de
 L:     isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:     http://www.isdn4linux.de
 T:     git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
@@ -3325,8 +3334,8 @@ P:        Jeremy Fitzhardinge
 M:     jeremy@xensource.com
 P:     Chris Wright
 M:     chrisw@sous-sol.org
-P:     Zachary Amsden
-M:     zach@vmware.com
+P:     Alok Kataria
+M:     akataria@vmware.com
 P:     Rusty Russell
 M:     rusty@rustcorp.com.au
 L:     virtualization@lists.osdl.org
@@ -3537,6 +3546,12 @@ S:       Maintained
 PXA MMCI DRIVER
 S:     Orphan
 
+PXA RTC DRIVER
+P:     Robert Jarzmik
+M:     robert.jarzmik@free.fr
+L:     rtc-linux@googlegroups.com
+S:     Maintained
+
 QLOGIC QLA2XXX FC-SCSI DRIVER
 P:     Andrew Vasquez
 M:     linux-driver@qlogic.com
@@ -4164,7 +4179,7 @@ SUSPEND TO RAM
 P:     Len Brown
 M:     len.brown@intel.com
 P:     Pavel Machek
-M:     pavel@suse.cz
+M:     pavel@ucw.cz
 P:     Rafael J. Wysocki
 M:     rjw@sisk.pl
 L:     linux-pm@lists.linux-foundation.org
@@ -4285,8 +4300,8 @@ P:        Rajiv Andrade
 M:     srajiv@linux.vnet.ibm.com
 W:     http://tpmdd.sourceforge.net
 P:     Marcel Selhorst
-M:     tpm@selhorst.net
-W:     http://www.prosec.rub.de/tpm/
+M:     m.selhorst@sirrix.com
+W:     http://www.sirrix.com
 L:     tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:     Maintained
 
@@ -4916,11 +4931,11 @@ L:      zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:     Maintained
 
 ZR36067 VIDEO FOR LINUX DRIVER
-P:     Ronald Bultje
-M:     rbultje@ronald.bitfreak.net
 L:     mjpeg-users@lists.sourceforge.net
+L:     linux-media@vger.kernel.org
 W:     http://mjpeg.sourceforge.net/driver-zoran/
-S:     Maintained
+T:     Mercurial http://linuxtv.org/hg/v4l-dvb
+S:     Odd Fixes
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
 P:     Maciej W. Rozycki
index 7715b2c..d04ee0a 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc7
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
@@ -389,6 +389,7 @@ PHONY += outputmakefile
 # output directory.
 outputmakefile:
 ifneq ($(KBUILD_SRC),)
+       $(Q)ln -fsn $(srctree) source
        $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
            $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 endif
@@ -946,7 +947,6 @@ ifneq ($(KBUILD_SRC),)
            mkdir -p include2;                                          \
            ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm;     \
        fi
-       ln -fsn $(srctree) source
 endif
 
 # prepare2 creates a makefile if using a separate output directory
diff --git a/README b/README
index 90a0765..d6c6c74 100644 (file)
--- a/README
+++ b/README
@@ -188,7 +188,7 @@ CONFIGURING the kernel:
                           values to random values.
 
    You can find more information on using the Linux kernel config tools
-   in Documentation/kbuild/make-configs.txt.
+   in Documentation/kbuild/kconfig.txt.
 
        NOTES on "make config":
        - having unnecessary drivers will make the kernel bigger, and can
index f238370..8d0097f 100644 (file)
@@ -93,8 +93,8 @@ common_shutdown_1(void *generic_ptr)
        if (cpuid != boot_cpuid) {
                flags |= 0x00040000UL; /* "remain halted" */
                *pflags = flags;
-               cpu_clear(cpuid, cpu_present_map);
-               cpu_clear(cpuid, cpu_possible_map);
+               set_cpu_present(cpuid, false);
+               set_cpu_possible(cpuid, false);
                halt();
        }
 #endif
@@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)
 
 #ifdef CONFIG_SMP
        /* Wait for the secondaries to halt. */
-       cpu_clear(boot_cpuid, cpu_present_map);
-       cpu_clear(boot_cpuid, cpu_possible_map);
+       set_cpu_present(boot_cpuid, false);
+       set_cpu_possible(boot_cpuid, false);
        while (cpus_weight(cpu_present_map))
                barrier();
 #endif
index 00f1dc3..b1fe567 100644 (file)
@@ -120,12 +120,12 @@ void __cpuinit
 smp_callin(void)
 {
        int cpuid = hard_smp_processor_id();
-       cpumask_t mask = cpu_online_map;
 
-       if (cpu_test_and_set(cpuid, mask)) {
+       if (cpu_online(cpuid)) {
                printk("??, cpu 0x%x already present??\n", cpuid);
                BUG();
        }
+       set_cpu_online(cpuid, true);
 
        /* Turn on machine checks.  */
        wrmces(7);
@@ -436,8 +436,8 @@ setup_smp(void)
                                ((char *)cpubase + i*hwrpb->processor_size);
                        if ((cpu->flags & 0x1cc) == 0x1cc) {
                                smp_num_probed++;
-                               cpu_set(i, cpu_possible_map);
-                               cpu_set(i, cpu_present_map);
+                               set_cpu_possible(i, true);
+                               set_cpu_present(i, true);
                                cpu->pal_revision = boot_cpu_palrev;
                        }
 
@@ -470,8 +470,8 @@ smp_prepare_cpus(unsigned int max_cpus)
 
        /* Nothing to do on a UP box, or when told not to.  */
        if (smp_num_probed == 1 || max_cpus == 0) {
-               cpu_possible_map = cpumask_of_cpu(boot_cpuid);
-               cpu_present_map = cpumask_of_cpu(boot_cpuid);
+               init_cpu_possible(cpumask_of(boot_cpuid));
+               init_cpu_present(cpumask_of(boot_cpuid));
                printk(KERN_INFO "SMP mode deactivated.\n");
                return;
        }
index e0ee706..98e2f3d 100644 (file)
@@ -608,7 +608,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards
index 01d1ef9..1494561 100644 (file)
@@ -700,7 +700,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards
index 036a126..21599f3 100644 (file)
@@ -710,7 +710,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards
index 237a2a6..e2df81a 100644 (file)
@@ -606,7 +606,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # Sonics Silicon Backplane
index cd1d717..9b32d0e 100644 (file)
@@ -727,7 +727,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9_WATCHDOG is not set
+# CONFIG_AT91SAM9X_WATCHDOG is not set
 
 #
 # USB-based Watchdog Cards
index 8484909..d4a0da1 100644 (file)
@@ -74,9 +74,9 @@ EXPORT_SYMBOL(elf_set_personality);
  */
 int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
 {
-       if (executable_stack != EXSTACK_ENABLE_X)
+       if (executable_stack != EXSTACK_DISABLE_X)
                return 1;
-       if (cpu_architecture() <= CPU_ARCH_ARMv6)
+       if (cpu_architecture() < CPU_ARCH_ARMv6)
                return 1;
        return 0;
 }
index 440dc62..598ca61 100644 (file)
@@ -13,8 +13,8 @@
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
 
-const extern unsigned char relocate_new_kernel[];
-const extern unsigned int relocate_new_kernel_size;
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned int relocate_new_kernel_size;
 
 extern void setup_mm_for_reboot(char mode);
 
index 8d21427..bc5e412 100644 (file)
@@ -234,12 +234,13 @@ static void __init cacheid_init(void)
        unsigned int cachetype = read_cpuid_cachetype();
        unsigned int arch = cpu_architecture();
 
-       if (arch >= CPU_ARCH_ARMv7) {
-               cacheid = CACHEID_VIPT_NONALIASING;
-               if ((cachetype & (3 << 14)) == 1 << 14)
-                       cacheid |= CACHEID_ASID_TAGGED;
-       } else if (arch >= CPU_ARCH_ARMv6) {
-               if (cachetype & (1 << 23))
+       if (arch >= CPU_ARCH_ARMv6) {
+               if ((cachetype & (7 << 29)) == 4 << 29) {
+                       /* ARMv7 register format */
+                       cacheid = CACHEID_VIPT_NONALIASING;
+                       if ((cachetype & (3 << 14)) == 1 << 14)
+                               cacheid |= CACHEID_ASID_TAGGED;
+               } else if (cachetype & (1 << 23))
                        cacheid = CACHEID_VIPT_ALIASING;
                else
                        cacheid = CACHEID_VIPT_NONALIASING;
index 9eca220..412aa49 100644 (file)
@@ -697,7 +697,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91cap9_wdt_device = {
        .name           = "at91_wdt",
        .id             = -1,
index fdde1ea..d74c9ac 100644 (file)
@@ -643,7 +643,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9260_wdt_device = {
        .name           = "at91_wdt",
        .id             = -1,
index 1728975..59fc483 100644 (file)
@@ -621,7 +621,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9261_wdt_device = {
        .name           = "at91_wdt",
        .id             = -1,
index b753cb8..b7f2332 100644 (file)
@@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+       [0] = {
+               .start  = AT91_CHIPSELECT_4,
+               .end    = AT91_CHIPSELECT_4 + SZ_256M - 1,
+               .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+       }
+};
+
+static struct platform_device cf0_device = {
+       .id             = 0,
+       .dev            = {
+                               .platform_data  = &cf0_data,
+       },
+       .resource       = cf0_resources,
+       .num_resources  = ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+       [0] = {
+               .start  = AT91_CHIPSELECT_5,
+               .end    = AT91_CHIPSELECT_5 + SZ_256M - 1,
+               .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+       }
+};
+
+static struct platform_device cf1_device = {
+       .id             = 1,
+       .dev            = {
+                               .platform_data  = &cf1_data,
+       },
+       .resource       = cf1_resources,
+       .num_resources  = ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+       unsigned long ebi0_csa;
+       struct platform_device *pdev;
+
+       if (!data)
+               return;
+
+       /*
+        * assign CS4 or CS5 to SMC with Compact Flash logic support,
+        * we assume SMC timings are configured by board code,
+        * except True IDE where timings are controlled by driver
+        */
+       ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+       switch (data->chipselect) {
+       case 4:
+               at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+               ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+               cf0_data = *data;
+               pdev = &cf0_device;
+               break;
+       case 5:
+               at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+               ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+               cf1_data = *data;
+               pdev = &cf1_device;
+               break;
+       default:
+               printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+                      data->chipselect);
+               return;
+       }
+       at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+       if (data->det_pin) {
+               at91_set_gpio_input(data->det_pin, 1);
+               at91_set_deglitch(data->det_pin, 1);
+       }
+
+       if (data->irq_pin) {
+               at91_set_gpio_input(data->irq_pin, 1);
+               at91_set_deglitch(data->irq_pin, 1);
+       }
+
+       if (data->vcc_pin)
+               /* initially off */
+               at91_set_gpio_output(data->vcc_pin, 0);
+
+       /* enable EBI controlled pins */
+       at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+       at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+       at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+       at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+       pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+       platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
@@ -854,7 +959,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9263_wdt_device = {
        .name           = "at91_wdt",
        .id             = -1,
index 145324f..7281865 100644 (file)
@@ -609,7 +609,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9rl_wdt_device = {
        .name           = "at91_wdt",
        .id             = -1,
index 028e4f7..f2236f0 100644 (file)
@@ -437,7 +437,68 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 
 /*--------------------------------------------------------------------------*/
 
-/* This lock class tells lockdep that GPIO irqs are in a different
+#ifdef CONFIG_DEBUG_FS
+
+static int at91_gpio_show(struct seq_file *s, void *unused)
+{
+       int bank, j;
+
+       /* print heading */
+       seq_printf(s, "Pin\t");
+       for (bank = 0; bank < gpio_banks; bank++) {
+               seq_printf(s, "PIO%c\t", 'A' + bank);
+       };
+       seq_printf(s, "\n\n");
+
+       /* print pin status */
+       for (j = 0; j < 32; j++) {
+               seq_printf(s, "%i:\t", j);
+
+               for (bank = 0; bank < gpio_banks; bank++) {
+                       unsigned        pin  = PIN_BASE + (32 * bank) + j;
+                       void __iomem    *pio = pin_to_controller(pin);
+                       unsigned        mask = pin_to_mask(pin);
+
+                       if (__raw_readl(pio + PIO_PSR) & mask)
+                               seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
+                       else
+                               seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
+
+                       seq_printf(s, "\t");
+               }
+
+               seq_printf(s, "\n");
+       }
+
+       return 0;
+}
+
+static int at91_gpio_open(struct inode *inode, struct file *file)
+{
+       return single_open(file, at91_gpio_show, NULL);
+}
+
+static const struct file_operations at91_gpio_operations = {
+       .open           = at91_gpio_open,
+       .read           = seq_read,
+       .llseek         = seq_lseek,
+       .release        = single_release,
+};
+
+static int __init at91_gpio_debugfs_init(void)
+{
+       /* /sys/kernel/debug/at91_gpio */
+       (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
+       return 0;
+}
+postcore_initcall(at91_gpio_debugfs_init);
+
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
  * category than their parents, so it won't report false recursion.
  */
 static struct lock_class_key gpio_lock_class;
@@ -456,9 +517,6 @@ void __init at91_gpio_irq_setup(void)
                unsigned        id = this->bank->id;
                unsigned        i;
 
-               /* enable PIO controller's clock */
-               clk_enable(this->bank->clock);
-
                __raw_writel(~0, this->regbase + PIO_IDR);
 
                for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
@@ -589,6 +647,9 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
                at91_gpio->regbase = at91_gpio->bank->offset +
                        (void __iomem *)AT91_VA_BASE_SYS;
 
+               /* enable PIO controller's clock */
+               clk_enable(at91_gpio->bank->clock);
+
                /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
                if (last && last->bank->id == at91_gpio->bank->id)
                        last->next = at91_gpio;
index fb51f0e..793fe7b 100644 (file)
@@ -56,6 +56,9 @@ struct at91_cf_data {
        u8      vcc_pin;                /* power switching */
        u8      rst_pin;                /* card reset */
        u8      chipselect;             /* EBI Chip Select number */
+       u8      flags;
+#define AT91_CF_TRUE_IDE       0x01
+#define AT91_IDE_SWAP_A0_A2    0x02
 };
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
@@ -93,6 +96,7 @@ struct atmel_nand_data {
        u8              enable_pin;     /* chip enable */
        u8              det_pin;        /* card detect */
        u8              rdy_pin;        /* ready/busy */
+       u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
        u8              ale;            /* address line number connected to ALE */
        u8              cle;            /* address line number connected to CLE */
        u8              bus_width_16;   /* buswidth is 16 bit */
index 9bb4f04..7ac812d 100644 (file)
@@ -332,7 +332,6 @@ static int at91_pm_enter(suspend_state_t state)
                        at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
 
 error:
-       sdram_selfrefresh_disable();
        target_state = PM_SUSPEND_ON;
        at91_irq_resume();
        at91_gpio_resume();
index a957d23..38b6a9c 100644 (file)
@@ -311,6 +311,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
        gpio_request(gpio + 7, "nCF_SEL"