Merge branch 'topic/convert-tasklet' into to-push
Takashi Iwai [Thu, 25 Dec 2008 10:40:27 +0000 (11:40 +0100)]
351 files changed:
Documentation/arm/mem_alignment
Documentation/kernel-parameters.txt
Documentation/sound/alsa/ALSA-Configuration.txt
Documentation/sound/alsa/soc/machine.txt
Documentation/usb/gadget_serial.txt
Documentation/usb/proc_usb_info.txt
Documentation/usb/usbmon.txt
MAINTAINERS
Makefile
arch/arm/common/sa1111.c
arch/arm/kernel/armksyms.c
arch/arm/kernel/traps.c
arch/arm/mach-pxa/include/mach/palmasoc.h [new file with mode: 0644]
arch/arm/mach-pxa/include/mach/reset.h
arch/arm/mm/fault.c
arch/avr32/boards/favr-32/flash.c
arch/avr32/boards/favr-32/setup.c
arch/avr32/boot/images/Makefile
arch/avr32/configs/atstk1006_defconfig
arch/avr32/mach-at32ap/at32ap700x.c
arch/ia64/hp/sim/Kconfig
arch/mips/Kconfig.debug
arch/mips/configs/ip32_defconfig
arch/mips/include/asm/asmmacro.h
arch/mips/include/asm/byteorder.h
arch/mips/include/asm/elf.h
arch/mips/mm/dma-default.c
arch/parisc/include/asm/tlbflush.h
arch/powerpc/boot/Makefile
arch/powerpc/kernel/misc_32.S
arch/powerpc/lib/rheap.c
arch/powerpc/mm/hugetlbpage.c
arch/powerpc/mm/numa.c
arch/powerpc/platforms/cell/axon_msi.c
arch/sh/Kconfig
arch/sparc/include/asm/ptrace_32.h
arch/sparc/include/asm/ptrace_64.h
arch/x86/Kconfig.cpu
arch/x86/include/asm/vmi.h
arch/x86/kernel/amd_iommu.c
arch/x86/kernel/amd_iommu_init.c
arch/x86/kernel/cpu/mcheck/mce_64.c
arch/x86/kernel/microcode_core.c
arch/x86/kernel/microcode_intel.c
arch/x86/kernel/pci-gart_64.c
arch/x86/kernel/setup.c
arch/x86/kernel/smpboot.c
arch/x86/kernel/vmi_32.c
crypto/async_tx/async_xor.c
drivers/acpi/bus.c
drivers/acpi/toshiba_acpi.c
drivers/acpi/utilities/utglobal.c
drivers/ata/libata-core.c
drivers/ata/pata_hpt366.c
drivers/block/cciss.c
drivers/cdrom/cdrom.c
drivers/char/cp437.uni
drivers/char/vt.c
drivers/char/xilinx_hwicap/buffer_icap.c
drivers/char/xilinx_hwicap/buffer_icap.h
drivers/char/xilinx_hwicap/fifo_icap.c
drivers/char/xilinx_hwicap/fifo_icap.h
drivers/char/xilinx_hwicap/xilinx_hwicap.c
drivers/char/xilinx_hwicap/xilinx_hwicap.h
drivers/dma/dmaengine.c
drivers/dma/ioat_dma.c
drivers/dma/iop-adma.c
drivers/dma/mv_xor.c
drivers/edac/edac_device.c
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/radeon/radeon_irq.c
drivers/i2c/busses/i2c-cpm.c
drivers/i2c/busses/i2c-highlander.c
drivers/i2c/busses/i2c-pmcmsp.c
drivers/i2c/busses/i2c-s3c2410.c
drivers/ide/cs5530.c
drivers/ide/sc1200.c
drivers/ieee1394/nodemgr.c
drivers/md/bitmap.c
drivers/media/dvb/b2c2/Kconfig
drivers/media/dvb/b2c2/flexcop-fe-tuner.c
drivers/media/dvb/b2c2/flexcop-i2c.c
drivers/media/dvb/bt8xx/Kconfig
drivers/media/dvb/dvb-usb/Kconfig
drivers/media/dvb/dvb-usb/dib0700_devices.c
drivers/media/dvb/ttpci/Kconfig
drivers/media/video/compat_ioctl32.c
drivers/media/video/cx18/Kconfig
drivers/media/video/cx23885/Kconfig
drivers/media/video/cx88/Kconfig
drivers/media/video/em28xx/em28xx-video.c
drivers/media/video/gspca/gspca.c
drivers/media/video/pvrusb2/Kconfig
drivers/media/video/saa7134/Kconfig
drivers/message/fusion/mptscsih.c
drivers/net/bnx2.c
drivers/net/e1000e/ich8lan.c
drivers/net/enc28j60.c
drivers/net/jme.h
drivers/net/phy/mdio_bus.c
drivers/net/ppp_generic.c
drivers/net/starfire.c
drivers/net/sungem.c
drivers/net/tlan.c
drivers/pci/hotplug/acpiphp.h
drivers/pci/hotplug/acpiphp_core.c
drivers/pci/hotplug/acpiphp_glue.c
drivers/pci/hotplug/ibmphp_core.c
drivers/pci/hotplug/pciehp_core.c
drivers/pci/pcie/aer/aerdrv_core.c
drivers/pcmcia/bfin_cf_pcmcia.c
drivers/rtc/rtc-isl1208.c
drivers/scsi/aacraid/linit.c
drivers/scsi/device_handler/scsi_dh_hp_sw.c
drivers/scsi/ibmvscsi/ibmvstgt.c
drivers/scsi/libiscsi.c
drivers/scsi/scsi_lib.c
drivers/sh/maple/maple.c
drivers/staging/Kconfig
drivers/usb/class/usbtmc.c
drivers/usb/core/driver.c
drivers/usb/gadget/f_rndis.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/ftdi_sio.h
drivers/usb/serial/pl2303.c
drivers/usb/serial/pl2303.h
drivers/usb/serial/ti_usb_3410_5052.c
drivers/usb/storage/unusual_devs.h
drivers/video/aty/radeon_accel.c
drivers/video/aty/radeon_backlight.c
drivers/video/aty/radeon_base.c
drivers/video/aty/radeon_pm.c
drivers/video/aty/radeonfb.h
drivers/w1/w1_io.c
fs/9p/fid.c
fs/9p/v9fs.c
fs/9p/vfs_dentry.c
fs/9p/vfs_inode.c
fs/cifs/cifssmb.c
fs/ocfs2/ocfs2_fs.h
fs/ocfs2/xattr.c
include/acpi/acoutput.h
include/acpi/platform/aclinux.h
include/linux/mfd/wm8350/audio.h
include/linux/netdevice.h
include/linux/netfilter/nfnetlink_conntrack.h
include/linux/smp.h
include/linux/usb/ch9.h
include/net/irda/irda_device.h
include/sound/core.h
include/sound/l3.h [new file with mode: 0644]
include/sound/s3c24xx_uda134x.h [new file with mode: 0644]
include/sound/soc-dai.h [new file with mode: 0644]
include/sound/soc-dapm.h
include/sound/soc.h
include/sound/uda134x.h [new file with mode: 0644]
include/sound/version.h
include/video/radeon.h
kernel/cgroup.c
kernel/posix-timers.c
kernel/sched_clock.c
lib/dynamic_printk.c
mm/migrate.c
mm/slob.c
net/bluetooth/rfcomm/core.c
net/core/netpoll.c
net/ipv4/netfilter/nf_nat_rule.c
net/ipv4/tcp_vegas.c
net/ipv6/ndisc.c
net/netlabel/netlabel_unlabeled.c
net/phonet/pep-gprs.c
net/sched/sch_netem.c
net/socket.c
sound/ac97_bus.c
sound/aoa/codecs/Makefile
sound/aoa/codecs/onyx.c [moved from sound/aoa/codecs/snd-aoa-codec-onyx.c with 99% similarity]
sound/aoa/codecs/onyx.h [moved from sound/aoa/codecs/snd-aoa-codec-onyx.h with 100% similarity]
sound/aoa/codecs/tas-basstreble.h [moved from sound/aoa/codecs/snd-aoa-codec-tas-basstreble.h with 100% similarity]
sound/aoa/codecs/tas-gain-table.h [moved from sound/aoa/codecs/snd-aoa-codec-tas-gain-table.h with 100% similarity]
sound/aoa/codecs/tas.c [moved from sound/aoa/codecs/snd-aoa-codec-tas.c with 99% similarity]
sound/aoa/codecs/tas.h [moved from sound/aoa/codecs/snd-aoa-codec-tas.h with 100% similarity]
sound/aoa/codecs/toonie.c [moved from sound/aoa/codecs/snd-aoa-codec-toonie.c with 98% similarity]
sound/aoa/core/Makefile
sound/aoa/core/alsa.c [moved from sound/aoa/core/snd-aoa-alsa.c with 98% similarity]
sound/aoa/core/alsa.h [moved from sound/aoa/core/snd-aoa-alsa.h with 100% similarity]
sound/aoa/core/core.c [moved from sound/aoa/core/snd-aoa-core.c with 99% similarity]
sound/aoa/core/gpio-feature.c [moved from sound/aoa/core/snd-aoa-gpio-feature.c with 99% similarity]
sound/aoa/core/gpio-pmf.c [moved from sound/aoa/core/snd-aoa-gpio-pmf.c with 100% similarity]
sound/aoa/fabrics/Makefile
sound/aoa/fabrics/layout.c [moved from sound/aoa/fabrics/snd-aoa-fabric-layout.c with 99% similarity]
sound/aoa/soundbus/i2sbus/Makefile
sound/aoa/soundbus/i2sbus/control.c [moved from sound/aoa/soundbus/i2sbus/i2sbus-control.c with 100% similarity]
sound/aoa/soundbus/i2sbus/core.c [moved from sound/aoa/soundbus/i2sbus/i2sbus-core.c with 99% similarity]
sound/aoa/soundbus/i2sbus/i2sbus.h
sound/aoa/soundbus/i2sbus/interface.h [moved from sound/aoa/soundbus/i2sbus/i2sbus-interface.h with 100% similarity]
sound/aoa/soundbus/i2sbus/pcm.c [moved from sound/aoa/soundbus/i2sbus/i2sbus-pcm.c with 100% similarity]
sound/core/device.c
sound/drivers/Kconfig
sound/drivers/pcsp/pcsp.c
sound/drivers/pcsp/pcsp.h
sound/drivers/pcsp/pcsp_lib.c
sound/isa/sb/sb8.c
sound/pci/ac97/ac97_codec.c
sound/pci/ac97/ac97_patch.c
sound/pci/ca0106/ca0106.h
sound/pci/ca0106/ca0106_main.c
sound/pci/ca0106/ca0106_mixer.c
sound/pci/cs46xx/cs46xx_lib.c
sound/pci/emu10k1/emu10k1_main.c
sound/pci/emu10k1/emumixer.c
sound/pci/hda/patch_sigmatel.c
sound/pci/ice1712/ice1724.c
sound/pci/mixart/mixart.c
sound/pci/pcxhr/pcxhr.c
sound/pci/riptide/riptide.c
sound/ppc/pmac.c
sound/ppc/tumbler.c
sound/soc/Kconfig
sound/soc/Makefile
sound/soc/at32/Kconfig [deleted file]
sound/soc/at32/Makefile [deleted file]
sound/soc/at32/at32-pcm.c [deleted file]
sound/soc/at32/at32-pcm.h [deleted file]
sound/soc/at32/at32-ssc.c [deleted file]
sound/soc/at32/at32-ssc.h [deleted file]
sound/soc/at91/Kconfig [deleted file]
sound/soc/at91/Makefile [deleted file]
sound/soc/at91/at91-pcm.c [deleted file]
sound/soc/at91/at91-pcm.h [deleted file]
sound/soc/at91/at91-ssc.c [deleted file]
sound/soc/at91/at91-ssc.h [deleted file]
sound/soc/atmel/Kconfig [new file with mode: 0644]
sound/soc/atmel/Makefile [new file with mode: 0644]
sound/soc/atmel/atmel-pcm.c [new file with mode: 0644]
sound/soc/atmel/atmel-pcm.h [new file with mode: 0644]
sound/soc/atmel/atmel_ssc_dai.c [new file with mode: 0644]
sound/soc/atmel/atmel_ssc_dai.h [new file with mode: 0644]
sound/soc/atmel/playpaq_wm8510.c [moved from sound/soc/at32/playpaq_wm8510.c with 98% similarity]
sound/soc/atmel/sam9g20_wm8731.c [new file with mode: 0644]
sound/soc/au1x/dbdma2.c
sound/soc/au1x/psc-ac97.c
sound/soc/au1x/psc-i2s.c
sound/soc/au1x/sample-ac97.c
sound/soc/blackfin/Kconfig
sound/soc/blackfin/bf5xx-ac97-pcm.c
sound/soc/blackfin/bf5xx-ac97.c
sound/soc/blackfin/bf5xx-ac97.h
sound/soc/blackfin/bf5xx-ad1980.c
sound/soc/blackfin/bf5xx-ad73311.c
sound/soc/blackfin/bf5xx-i2s-pcm.c
sound/soc/blackfin/bf5xx-i2s.c
sound/soc/blackfin/bf5xx-sport.h
sound/soc/blackfin/bf5xx-ssm2602.c
sound/soc/codecs/Kconfig
sound/soc/codecs/Makefile
sound/soc/codecs/ac97.c
sound/soc/codecs/ad1980.c
sound/soc/codecs/ad73311.c
sound/soc/codecs/ak4535.c
sound/soc/codecs/cs4270.c
sound/soc/codecs/l3.c [new file with mode: 0644]
sound/soc/codecs/pcm3008.c [new file with mode: 0644]
sound/soc/codecs/pcm3008.h [new file with mode: 0644]
sound/soc/codecs/ssm2602.c
sound/soc/codecs/tlv320aic23.c
sound/soc/codecs/tlv320aic26.c
sound/soc/codecs/tlv320aic3x.c
sound/soc/codecs/tlv320aic3x.h
sound/soc/codecs/twl4030.c [new file with mode: 0644]
sound/soc/codecs/twl4030.h [new file with mode: 0644]
sound/soc/codecs/uda134x.c [new file with mode: 0644]
sound/soc/codecs/uda134x.h [new file with mode: 0644]
sound/soc/codecs/uda1380.c
sound/soc/codecs/wm8350.c [new file with mode: 0644]
sound/soc/codecs/wm8350.h [new file with mode: 0644]
sound/soc/codecs/wm8510.c
sound/soc/codecs/wm8580.c
sound/soc/codecs/wm8580.h
sound/soc/codecs/wm8728.c [new file with mode: 0644]
sound/soc/codecs/wm8728.h [new file with mode: 0644]
sound/soc/codecs/wm8731.c
sound/soc/codecs/wm8750.c
sound/soc/codecs/wm8753.c
sound/soc/codecs/wm8900.c
sound/soc/codecs/wm8900.h
sound/soc/codecs/wm8903.c
sound/soc/codecs/wm8903.h
sound/soc/codecs/wm8971.c
sound/soc/codecs/wm8990.c
sound/soc/codecs/wm8990.h
sound/soc/codecs/wm9712.c
sound/soc/codecs/wm9713.c
sound/soc/davinci/Kconfig
sound/soc/davinci/Makefile
sound/soc/davinci/davinci-evm.c
sound/soc/davinci/davinci-i2s.c
sound/soc/davinci/davinci-pcm.c
sound/soc/davinci/davinci-sffsdr.c [new file with mode: 0644]
sound/soc/fsl/Kconfig
sound/soc/fsl/fsl_dma.c
sound/soc/fsl/fsl_ssi.c
sound/soc/fsl/mpc5200_psc_i2s.c
sound/soc/fsl/mpc8610_hpcd.c
sound/soc/fsl/soc-of-simple.c
sound/soc/omap/Kconfig
sound/soc/omap/Makefile
sound/soc/omap/n810.c
sound/soc/omap/omap-mcbsp.c
sound/soc/omap/omap-pcm.c
sound/soc/omap/omap2evm.c [new file with mode: 0644]
sound/soc/omap/omap3beagle.c [new file with mode: 0644]
sound/soc/omap/omap3pandora.c [new file with mode: 0644]
sound/soc/omap/osk5912.c
sound/soc/omap/overo.c [new file with mode: 0644]
sound/soc/omap/sdp3430.c [new file with mode: 0644]
sound/soc/pxa/Kconfig
sound/soc/pxa/Makefile
sound/soc/pxa/corgi.c
sound/soc/pxa/e800_wm9712.c
sound/soc/pxa/em-x270.c
sound/soc/pxa/palm27x.c [new file with mode: 0644]
sound/soc/pxa/poodle.c
sound/soc/pxa/pxa-ssp.c [new file with mode: 0644]
sound/soc/pxa/pxa-ssp.h [new file with mode: 0644]
sound/soc/pxa/pxa2xx-ac97.c
sound/soc/pxa/pxa2xx-i2s.c
sound/soc/pxa/pxa2xx-pcm.c
sound/soc/pxa/spitz.c
sound/soc/pxa/tosa.c
sound/soc/pxa/zylonite.c [new file with mode: 0644]
sound/soc/s3c24xx/Kconfig
sound/soc/s3c24xx/Makefile
sound/soc/s3c24xx/ln2440sbc_alc650.c
sound/soc/s3c24xx/neo1973_wm8753.c
sound/soc/s3c24xx/s3c2412-i2s.c
sound/soc/s3c24xx/s3c2443-ac97.c
sound/soc/s3c24xx/s3c24xx-i2s.c
sound/soc/s3c24xx/s3c24xx-pcm.c
sound/soc/s3c24xx/s3c24xx_uda134x.c [new file with mode: 0644]
sound/soc/s3c24xx/smdk2443_wm9710.c
sound/soc/sh/dma-sh7760.c
sound/soc/sh/hac.c
sound/soc/sh/sh7760-ac97.c
sound/soc/sh/ssi.c
sound/soc/soc-core.c
sound/soc/soc-dapm.c
sound/usb/caiaq/caiaq-control.c
sound/usb/caiaq/caiaq-device.c
sound/usb/usx2y/usb_stream.c

index d145ccc..c7c7a11 100644 (file)
@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment.  The number is made up from various bits:
+/proc/cpu/alignment.  The number is made up from various bits:
 
 bit            behavior when set
 ---            -----------------
index e0f346d..c9115c1 100644 (file)
@@ -220,14 +220,17 @@ and is between 256 and 4096 characters. It is defined in the file
                        Bits in debug_level correspond to a level in
                        ACPI_DEBUG_PRINT statements, e.g.,
                            ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
-                       See Documentation/acpi/debug.txt for more information
-                       about debug layers and levels.
+                       The debug_level mask defaults to "info".  See
+                       Documentation/acpi/debug.txt for more information about
+                       debug layers and levels.
 
+                       Enable processor driver info messages:
+                           acpi.debug_layer=0x20000000
+                       Enable PCI/PCI interrupt routing info messages:
+                           acpi.debug_layer=0x400000
                        Enable AML "Debug" output, i.e., stores to the Debug
                        object while interpreting AML:
                            acpi.debug_layer=0xffffffff acpi.debug_level=0x2
-                       Enable PCI/PCI interrupt routing info messages:
-                           acpi.debug_layer=0x400000 acpi.debug_level=0x4
                        Enable all messages related to ACPI hardware:
                            acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
 
index 3cd2ad9..394d7d3 100644 (file)
@@ -1063,6 +1063,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
        STAC9227/9228/9229/927x
          ref           Reference board
+         ref-no-jd     Reference board without HP/Mic jack detection
          3stack        D965 3stack
          5stack        D965 5stack + SPDIF
          dell-3stack   Dell Dimension E520
@@ -1076,6 +1077,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
        STAC92HD73*
          ref           Reference board
+         no-jd         BIOS setup but without jack-detection
          dell-m6-amic  Dell desktops/laptops with analog mics
          dell-m6-dmic  Dell desktops/laptops with digital mics
          dell-m6       Dell desktops/laptops with both type of mics
index f370e7d..bab7711 100644 (file)
@@ -9,7 +9,7 @@ the audio subsystem with the kernel as a platform device and is represented by
 the following struct:-
 
 /* SoC machine */
-struct snd_soc_machine {
+struct snd_soc_card {
        char *name;
 
        int (*probe)(struct platform_device *pdev);
@@ -67,10 +67,10 @@ static struct snd_soc_dai_link corgi_dai = {
        .ops = &corgi_ops,
 };
 
-struct snd_soc_machine then sets up the machine with it's DAIs. e.g.
+struct snd_soc_card then sets up the machine with it's DAIs. e.g.
 
 /* corgi audio machine driver */
-static struct snd_soc_machine snd_soc_machine_corgi = {
+static struct snd_soc_card snd_soc_corgi = {
        .name = "Corgi",
        .dai_link = &corgi_dai,
        .num_links = 1,
@@ -90,7 +90,7 @@ static struct wm8731_setup_data corgi_wm8731_setup = {
 
 /* corgi audio subsystem */
 static struct snd_soc_device corgi_snd_devdata = {
-       .machine = &snd_soc_machine_corgi,
+       .machine = &snd_soc_corgi,
        .platform = &pxa2xx_soc_platform,
        .codec_dev = &soc_codec_dev_wm8731,
        .codec_data = &corgi_wm8731_setup,
index 9b22bd1..eac7df9 100644 (file)
@@ -114,11 +114,11 @@ modules.
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget
index 077e903..fafcd47 100644 (file)
@@ -49,8 +49,10 @@ it and 002/048 sometime later.
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,
index 2917ce4..2704819 100644 (file)
@@ -34,11 +34,12 @@ if usbmon is built into the kernel.
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
@@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond
index 24741de..7010257 100644 (file)
@@ -1527,10 +1527,10 @@ W:      http://ebtables.sourceforge.net/
 S:     Maintained
 
 ECRYPT FILE SYSTEM
-P:     Mike Halcrow, Phillip Hellewell
-M:     mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L:     ecryptfs-devel@lists.sourceforge.net
-W:     http://ecryptfs.sourceforge.net/
+P:     Tyler Hicks, Dustin Kirkland
+M:     tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L:     ecryptfs-devel@lists.launchpad.net
+W:     https://launchpad.net/ecryptfs
 S:     Supported
 
 EDAC-CORE
@@ -2191,9 +2191,9 @@ S:        Supported
 
 INOTIFY
 P:     John McCutchan
-M:     ttb@tentacle.dhs.org
+M:     john@johnmccutchan.com
 P:     Robert Love
-M:     rml@novell.com
+M:     rlove@rlove.org
 L:     linux-kernel@vger.kernel.org
 S:     Maintained
 
@@ -3977,7 +3977,7 @@ M:        tiwai@suse.de
 L:     alsa-devel@alsa-project.org (subscribers-only)
 S:     Maintained
 
-SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT
+SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
 P:     Liam Girdwood
 M:     lrg@slimlogic.co.uk
 P:     Mark Brown
@@ -4529,7 +4529,7 @@ S:        Maintained
 USB VIDEO CLASS
 P:     Laurent Pinchart
 M:     laurent.pinchart@skynet.be
-L:     linux-uvc-devel@lists.berlios.de
+L:     linux-uvc-devel@lists.berlios.de (subscribers-only)
 L:     video4linux-list@redhat.com
 W:     http://linux-uvc.berlios.de
 S:     Maintained
index 6c2f51b..71e98e9 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc8
+EXTRAVERSION =
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
index 47ccec9..ef12794 100644 (file)
@@ -630,7 +630,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
                return -ENOMEM;
 
        sachip->clk = clk_get(me, "SA1111_CLK");
-       if (!sachip->clk) {
+       if (IS_ERR(sachip->clk)) {
                ret = PTR_ERR(sachip->clk);
                goto err_free;
        }
index c74f766..23af3c9 100644 (file)
@@ -115,6 +115,8 @@ EXPORT_SYMBOL(__strnlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 
 #ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
@@ -181,8 +183,6 @@ EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
-EXPORT_SYMBOL(copy_page);
-
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif
index 57e6874..79abc4d 100644 (file)
@@ -18,6 +18,7 @@
 #include <linux/personality.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h
new file mode 100644 (file)
index 0000000..6c4b1f7
--- /dev/null
@@ -0,0 +1,13 @@
+#ifndef _INCLUDE_PALMASOC_H_
+#define _INCLUDE_PALMASOC_H_
+struct palm27x_asoc_info {
+       int     jack_gpio;
+};
+
+#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
+void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
+#else
+static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
+#endif
+
+#endif
index 7b8842c..31e6a7b 100644 (file)
@@ -12,9 +12,8 @@ extern void clear_reset_status(unsigned int mask);
 
 /**
  * init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
  */
 extern int init_gpio_reset(int gpio, int output);
 
index 2df8d9f..22c9530 100644 (file)
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/mm.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
index 5f139b7..604bbd5 100644 (file)
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
        .ncs_read_setup         = 0,
index 7538f3d..1ee4faf 100644 (file)
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/init.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/init.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {
index 219720a..1848bf0 100644 (file)
@@ -10,7 +10,7 @@ MKIMAGE               := $(srctree)/scripts/mkuboot.sh
 
 extra-y                := vmlinux.bin vmlinux.gz
 
-OBJCOPYFLAGS_vmlinux.bin := -O binary
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
 $(obj)/vmlinux.bin: vmlinux FORCE
        $(call if_changed,objcopy)
 
index 8b6e54c..6c45a3b 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug  5 15:40:26 2008
+# Linux kernel version: 2.6.28-rc8
+# Thu Dec 18 11:22:23 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -67,6 +67,7 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
@@ -77,15 +78,8 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -118,6 +112,7 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type and features
@@ -134,6 +129,8 @@ CONFIG_CPU_AT32AP700X=y
 CONFIG_CPU_AT32AP7000=y
 CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MIMC200 is not set
 # CONFIG_BOARD_ATSTK1002 is not set
 # CONFIG_BOARD_ATSTK1003 is not set
 # CONFIG_BOARD_ATSTK1004 is not set
@@ -171,14 +168,14 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
@@ -186,7 +183,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_CMDLINE=""
 
 #
@@ -228,6 +225,8 @@ CONFIG_CPU_FREQ_AT32AP=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -299,6 +298,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -321,14 +321,8 @@ CONFIG_LLC=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -359,6 +353,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_HAVE_MTD_OTP=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -407,6 +402,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # Self-contained MTD device drivers
 #
 CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+CONFIG_MTD_DATAFLASH_OTP=y
 CONFIG_MTD_M25P80=m
 CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_SLRAM is not set
@@ -464,9 +461,10 @@ CONFIG_ATMEL_TCLIB=y
 CONFIG_ATMEL_TCB_CLKSRC=y
 CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 CONFIG_ATMEL_SSC=m
 # CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
 
 #
 # SCSI device support
@@ -548,6 +546,9 @@ CONFIG_MACB=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -653,6 +654,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=m
 
 #
@@ -717,6 +719,10 @@ CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -745,11 +751,11 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -758,6 +764,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -783,6 +793,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -804,10 +815,13 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
 # CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
 # CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
@@ -818,6 +832,7 @@ CONFIG_LCD_LTV350QV=y
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -848,28 +863,32 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
@@ -887,7 +906,7 @@ CONFIG_MMC=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -895,10 +914,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -918,6 +938,7 @@ CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
@@ -950,25 +971,31 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -989,6 +1016,8 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_NET_DMA is not set
 CONFIG_DMATEST=m
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -998,12 +1027,17 @@ CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+# CONFIG_EXT4_FS_XATTR is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -1036,6 +1070,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1054,7 +1089,8 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
@@ -1088,6 +1124,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1185,10 +1222,21 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1196,17 +1244,26 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1257,7 +1314,7 @@ CONFIG_CRYPTO_SHA1=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1278,14 +1335,17 @@ CONFIG_CRYPTO_DES=m
 #
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=m
index 0c6e02f..066252e 100644 (file)
@@ -967,28 +967,28 @@ static inline void configure_usart0_pins(void)
 {
        u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
 
-       select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+       select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart1_pins(void)
 {
        u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
 
-       select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+       select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart2_pins(void)
 {
        u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
 
-       select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+       select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart3_pins(void)
 {
        u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
 
-       select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+       select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static struct platform_device *__initdata at32_usarts[4];
index f92306b..8d513a8 100644 (file)
@@ -4,6 +4,7 @@ menu "HP Simulator drivers"
 
 config HP_SIMETH
        bool "Simulated Ethernet "
+       depends on NET
 
 config HP_SIMSERIAL
        bool "Simulated serial driver support"
index 765c8e2..364ca89 100644 (file)
@@ -48,7 +48,7 @@ config RUNTIME_DEBUG
        help
          If you say Y here, some debugging macros will do run-time checking.
          If you say N here, those macros will mostly turn to no-ops.  See
-         include/asm-mips/debug.h for debuging macros.
+         arch/mips/include/asm/debug.h for debugging macros.
          If unsure, say N.
 
 endmenu
index fe4699d..de4c7a0 100644 (file)
@@ -1,71 +1,71 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:33 2007
+# Linux kernel version: 2.6.28-rc7
+# Wed Dec 10 14:39:08 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_ARC32=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -75,6 +75,7 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -87,6 +88,7 @@ CONFIG_ARC_PROMLIB=y
 # CONFIG_CPU_TX49XX is not set
 CONFIG_CPU_R5000=y
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -116,65 +118,73 @@ CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -184,27 +194,43 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -213,59 +239,50 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_MIPS32_O32=y
-# CONFIG_MIPS32_N32 is not set
+CONFIG_MIPS32_N32=y
 CONFIG_BINFMT_ELF32=y
 
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -273,56 +290,83 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
 CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -332,10 +376,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -343,15 +383,14 @@ CONFIG_NETWORK_SECMARK=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -360,60 +399,40 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-
-#
-# Misc devices
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=y
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -421,19 +440,20 @@ CONFIG_SGI_IOC4=y
 #
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
 
 #
@@ -443,35 +463,36 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=y
 CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_HOST_SMP=y
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 CONFIG_AIC7XXX_DEBUG_ENABLE=y
 CONFIG_AIC7XXX_DEBUG_MASK=0
 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -482,6 +503,7 @@ CONFIG_SCSI_AIC94XX=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -492,147 +514,81 @@ CONFIG_SCSI_AIC94XX=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -640,6 +596,7 @@ CONFIG_NETXEN_NIC=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -649,16 +606,32 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -669,8 +642,8 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_MACEPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_MACEPS2=y
+CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=y
 # CONFIG_GAMEPORT is not set
 
@@ -678,10 +651,13 @@ CONFIG_SERIO_RAW=y
 # Character devices
 #
 CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -702,192 +678,304 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# I2C support
+# Watchdog Device Drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 
 #
-# SPI support
+# PCI-based Watchdog Cards
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+CONFIG_DAB=y
 
 #
-# Console display driver support
+# Graphics support
 #
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_GBE=y
+CONFIG_FB_GBE_MEM=4
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# HID Devices
+# Console display driver support
 #
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SGI_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
+# Special HID drivers
 #
+CONFIG_HID_COMPAT=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
 #
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# Real Time Clock
+# SPI RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
+# Platform RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -896,11 +984,11 @@ CONFIG_GENERIC_ACL=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -916,33 +1004,42 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -953,45 +1050,83 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_AMIGA_PARTITION is not set
 # CONFIG_ATARI_PARTITION is not set
 # CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -1000,51 +1135,99 @@ CONFIG_CMDLINE=""
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
@@ -1052,10 +1235,15 @@ CONFIG_CRYPTO_CAMELLIA=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
index 7a88175..6c8342a 100644 (file)
        mtc0    \reg, CP0_TCSTATUS
        _ehb
        .endm
+#elif defined(CONFIG_CPU_MIPSR2)
+       .macro  local_irq_enable reg=t0
+       ei
+       irq_enable_hazard
+       .endm
+
+       .macro  local_irq_disable reg=t0
+       di
+       irq_disable_hazard
+       .endm
 #else
        .macro  local_irq_enable reg=t0
        mfc0    \reg, CP0_STATUS
index 2988d29..33790b9 100644 (file)
@@ -50,9 +50,8 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 {
        __asm__(
-       "       dsbh    %0, %1                  \n"
-       "       dshd    %0, %0                  \n"
-       "       drotr   %0, %0, 32              \n"
+       "       dsbh    %0, %1\n"
+       "       dshd    %0, %0"
        : "=r" (x)
        : "r" (x));
 
index a8eac16..d58f128 100644 (file)
@@ -232,7 +232,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
  */
 #ifdef __MIPSEB__
 #define ELF_DATA       ELFDATA2MSB
-#elif __MIPSEL__
+#elif defined(__MIPSEL__)
 #define ELF_DATA       ELFDATA2LSB
 #endif
 #define ELF_ARCH       EM_MIPS
index 5b98d0e..e6708b3 100644 (file)
@@ -111,6 +111,7 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
        dma_addr_t dma_handle)
 {
+       plat_unmap_dma_mem(dma_handle);
        free_pages((unsigned long) vaddr, get_order(size));
 }
 
@@ -121,6 +122,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
 {
        unsigned long addr = (unsigned long) vaddr;
 
+       plat_unmap_dma_mem(dma_handle);
+
        if (!plat_device_is_coherent(dev))
                addr = CAC_ADDR(addr);
 
index b72ec66..1f6fd4f 100644 (file)
@@ -44,9 +44,12 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
 {
        BUG_ON(mm == &init_mm); /* Should never happen */
 
-#ifdef CONFIG_SMP
+#if 1 || defined(CONFIG_SMP)
        flush_tlb_all();
 #else
+       /* FIXME: currently broken, causing space id and protection ids
+        *  to go out of sync, resulting in faults on userspace accesses.
+        */
        if (mm) {
                if (mm->context != 0)
                        free_sid(mm->context);
index 8fc6d72..3d3daa6 100644 (file)
@@ -41,6 +41,7 @@ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
index bdc8b0e..5c33bc1 100644 (file)
@@ -479,17 +479,20 @@ _GLOBAL(_tlbil_pid)
  * (no broadcast)
  */
 _GLOBAL(_tlbil_va)
+       mfmsr   r10
+       wrteei  0
        slwi    r4,r4,16
        mtspr   SPRN_MAS6,r4            /* assume AS=0 for now */
        tlbsx   0,r3
        mfspr   r4,SPRN_MAS1            /* check valid */
        andis.  r3,r4,MAS1_VALID@h
-       beqlr
+       beq     1f
        rlwinm  r4,r4,0,1,31
        mtspr   SPRN_MAS1,r4
        tlbwe
        msync
        isync
+1:     wrtee   r10
        blr
 #endif /* CONFIG_FSL_BOOKE */
 
index 29b2941..45907c1 100644 (file)
@@ -556,6 +556,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co
                be = blk->start + blk->size;
                if (s >= bs && e <= be)
                        break;
+               blk = NULL;
        }
 
        if (blk == NULL)
index 7bbf4e4..f0c3b88 100644 (file)
@@ -507,6 +507,9 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 {
        struct hstate *hstate = hstate_file(file);
        int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+
+       if (!mmu_huge_psizes[mmu_psize])
+               return -EINVAL;
        return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
 }
 
index a8397bb..cf81049 100644 (file)
@@ -901,10 +901,17 @@ static void mark_reserved_regions_for_nid(int nid)
                        if (end_pfn > node_ar.end_pfn)
                                reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
                                        - (start_pfn << PAGE_SHIFT);
-                       dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
-                               reserve_size, node_ar.nid);
-                       reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
-                                               reserve_size, BOOTMEM_DEFAULT);
+                       /*
+                        * Only worry about *this* node, others may not
+                        * yet have valid NODE_DATA().
+                        */
+                       if (node_ar.nid == nid) {
+                               dbg("reserve_bootmem %lx %lx nid=%d\n",
+                                       physbase, reserve_size, node_ar.nid);
+                               reserve_bootmem_node(NODE_DATA(node_ar.nid),
+                                               physbase, reserve_size,
+                                               BOOTMEM_DEFAULT);
+                       }
                        /*
                         * if reserved region is contained in the active region
                         * then done.
@@ -929,7 +936,6 @@ static void mark_reserved_regions_for_nid(int nid)
 void __init do_init_bootmem(void)
 {
        int nid;
-       unsigned int i;
 
        min_low_pfn = 0;
        max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
index 442cf36..0ce45c2 100644 (file)
@@ -413,6 +413,9 @@ static int axon_msi_probe(struct of_device *device,
                        MSIC_CTRL_IRQ_ENABLE | MSIC_CTRL_ENABLE |
                        MSIC_CTRL_FIFO_SIZE);
 
+       msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG)
+                               & MSIC_FIFO_SIZE_MASK;
+
        device->dev.platform_data = msic;
 
        ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs;
index 80119b3..5c9cbfc 100644 (file)
@@ -55,6 +55,8 @@ config GENERIC_HARDIRQS
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
        def_bool y
+       depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
+                               !SH_7751_SYSTEMH && !HD64461)
 
 config GENERIC_IRQ_PROBE
        def_bool y
index d409c4f..4cef450 100644 (file)
@@ -62,6 +62,8 @@ struct sparc_stackf {
 
 #ifdef __KERNEL__
 
+#include <asm/system.h>
+
 static inline bool pt_regs_is_syscall(struct pt_regs *regs)
 {
        return (regs->psr & PSR_SYSCALL);
@@ -72,6 +74,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
        return (regs->psr &= ~PSR_SYSCALL);
 }
 
+#define arch_ptrace_stop_needed(exit_code, info) \
+({     flush_user_windows(); \
+       current_thread_info()->w_saved != 0;    \
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+       synchronize_user_stack()
+
 #define user_mode(regs) (!((regs)->psr & PSR_PS))
 #define instruction_pointer(regs) ((regs)->pc)
 #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
index 84e969f..cd6fbfc 100644 (file)
@@ -114,6 +114,7 @@ struct sparc_trapf {
 #ifdef __KERNEL__
 
 #include <linux/threads.h>
+#include <asm/system.h>
 
 static inline int pt_regs_trap_type(struct pt_regs *regs)
 {
@@ -130,6 +131,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
        return (regs->tstate &= ~TSTATE_SYSCALL);
 }
 
+#define arch_ptrace_stop_needed(exit_code, info) \
+({     flush_user_windows(); \
+       get_thread_wsaved() != 0; \
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+       synchronize_user_stack()
+
 struct global_reg_snapshot {
        unsigned long           tstate;
        unsigned long           tpc;
index b815664..8e99073 100644 (file)
@@ -520,6 +520,7 @@ config X86_PTRACE_BTS
        bool "Branch Trace Store"
        default y
        depends on X86_DEBUGCTLMSR
+       depends on BROKEN
        help
          This adds a ptrace interface to the hardware's branch trace store.
 
index b7c0dea..61e08c0 100644 (file)
@@ -223,9 +223,15 @@ struct pci_header {
 } __attribute__((packed));
 
 /* Function prototypes for bootstrapping */
+#ifdef CONFIG_VMI
 extern void vmi_init(void);
+extern void vmi_activate(void);
 extern void vmi_bringup(void);
-extern void vmi_apply_boot_page_allocations(void);
+#else
+static inline void vmi_init(void) {}
+static inline void vmi_activate(void) {}
+static inline void vmi_bringup(void) {}
+#endif
 
 /* State needed to start an application processor in an SMP system. */
 struct vmi_ap_state {
index a7b6dec..0a60d60 100644 (file)
@@ -235,8 +235,9 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
        status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
        writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
 
-       if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
-               printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+       if (unlikely(i == EXIT_LOOP_COUNT))
+               panic("AMD IOMMU: Completion wait loop failed\n");
+
 out:
        spin_unlock_irqrestore(&iommu->lock, flags);
 
index 30ae270..c6cc228 100644 (file)
@@ -427,6 +427,10 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
        memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
                        &entry, sizeof(entry));
 
+       /* set head and tail to zero manually */
+       writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+       writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
        iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
 
        return cmd_buf;
@@ -1074,7 +1078,8 @@ int __init amd_iommu_init(void)
                goto free;
 
        /* IOMMU rlookup table - find the IOMMU for a specific device */
-       amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL,
+       amd_iommu_rlookup_table = (void *)__get_free_pages(
+                       GFP_KERNEL | __GFP_ZERO,
                        get_order(rlookup_table_size));
        if (amd_iommu_rlookup_table == NULL)
                goto free;
index 4b031a4..1c83803 100644 (file)
@@ -510,12 +510,9 @@ static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
  */
 void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
 {
-       static cpumask_t mce_cpus = CPU_MASK_NONE;
-
        mce_cpu_quirks(c);
 
        if (mce_dont_init ||
-           cpu_test_and_set(smp_processor_id(), mce_cpus) ||
            !mce_available(c))
                return;
 
index 82fb280..c4b5b24 100644 (file)
@@ -272,13 +272,18 @@ static struct attribute_group mc_attr_group = {
        .name = "microcode",
 };
 
-static void microcode_fini_cpu(int cpu)
+static void __microcode_fini_cpu(int cpu)
 {
        struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
-       mutex_lock(&microcode_mutex);
        microcode_ops->microcode_fini_cpu(cpu);
        uci->valid = 0;
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+       mutex_lock(&microcode_mutex);
+       __microcode_fini_cpu(cpu);
        mutex_unlock(&microcode_mutex);
 }
 
@@ -306,12 +311,16 @@ static int microcode_resume_cpu(int cpu)
         * to this cpu (a bit of paranoia):
         */
        if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
-               microcode_fini_cpu(cpu);
+               __microcode_fini_cpu(cpu);
+               printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n",
+                               cpu);
                return -1;
        }
 
-       if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
-               microcode_fini_cpu(cpu);
+       if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) {
+               __microcode_fini_cpu(cpu);
+               printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n",
+                               cpu);
                /* Should we look for a new ucode here? */
                return 1;
        }
index 622dc4a..a8e6279 100644 (file)
@@ -155,6 +155,7 @@ static DEFINE_SPINLOCK(microcode_update_lock);
 static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 {
        struct cpuinfo_x86 *c = &cpu_data(cpu_num);
+       unsigned long flags;
        unsigned int val[2];
 
        memset(csig, 0, sizeof(*csig));
@@ -174,11 +175,16 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
                csig->pf = 1 << ((val[1] >> 18) & 7);
        }
 
+       /* serialize access to the physical write to MSR 0x79 */
+       spin_lock_irqsave(&microcode_update_lock, flags);
+
        wrmsr(MSR_IA32_UCODE_REV, 0, 0);
        /* see notes above for revision 1.07.  Apparent chip bug */
        sync_core();
        /* get the current revision from MSR 0x8B */
        rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
+       spin_unlock_irqrestore(&microcode_update_lock, flags);
+
        pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
                        csig->sig, csig->pf, csig->rev);
 
index ba7ad83..a35eaa3 100644 (file)
@@ -745,10 +745,8 @@ void __init gart_iommu_init(void)
        unsigned long scratch;
        long i;
 
-       if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) {
-               printk(KERN_INFO "PCI-GART: No AMD GART found.\n");
+       if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
                return;
-       }
 
 #ifndef CONFIG_AGP_AMD64
        no_agp = 1;
index 9d5674f..bdec76e 100644 (file)
@@ -794,6 +794,9 @@ void __init setup_arch(char **cmdline_p)
        printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
+       /* VMI may relocate the fixmap; do this before touching ioremap area */
+       vmi_init();
+
        early_cpu_init();
        early_ioremap_init();
 
@@ -880,13 +883,8 @@ void __init setup_arch(char **cmdline_p)
        check_efer();
 #endif
 
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
-       /*
-        * Must be before kernel pagetables are setup
-        * or fixmap area is touched.
-        */
-       vmi_init();
-#endif
+       /* Must be before kernel pagetables are setup */
+       vmi_activate();
 
        /* after early param, so could get panic from serial */
        reserve_early_setup_data();
index 7b10933..f71f96f 100644 (file)
@@ -294,9 +294,7 @@ static void __cpuinit start_secondary(void *unused)
         * fragile that we want to limit the things done here to the
         * most necessary things.
         */
-#ifdef CONFIG_VMI
        vmi_bringup();
-#endif
        cpu_init();
        preempt_disable();
        smp_callin();
index 8b6c393..22fd657 100644 (file)
@@ -960,8 +960,6 @@ static inline int __init activate_vmi(void)
 
 void __init vmi_init(void)
 {
-       unsigned long flags;
-
        if (!vmi_rom)
                probe_vmi_rom();
        else
@@ -973,13 +971,21 @@ void __init vmi_init(void)
 
        reserve_top_address(-vmi_rom->virtual_top);
 
-       local_irq_save(flags);
-       activate_vmi();
-
 #ifdef CONFIG_X86_IO_APIC
        /* This is virtual hardware; timer routing is wired correctly */
        no_timer_check = 1;
 #endif
+}
+
+void vmi_activate(void)
+{
+       unsigned long flags;
+
+       if (!vmi_rom)
+               return;
+
+       local_irq_save(flags);
+       activate_vmi();
        local_irq_restore(flags & X86_EFLAGS_IF);
 }
 
index c029d3e..595b786 100644 (file)
@@ -53,10 +53,17 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
        int xor_src_cnt;
        dma_addr_t dma_dest;
 
-       dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_FROM_DEVICE);
-       for (i = 0; i < src_cnt; i++)
+       /* map the dest bidrectional in case it is re-used as a source */
+       dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL);
+       for (i = 0; i < src_cnt; i++) {
+               /* only map the dest once */
+               if (unlikely(src_list[i] == dest)) {
+                       dma_src[i] = dma_dest;
+                       continue;
+               }
                dma_src[i] = dma_map_page(dma->dev, src_list[i], offset,
                                          len, DMA_TO_DEVICE);
+       }
 
        while (src_cnt) {
                async_flags = flags;
index 7edf6d9..765fd1c 100644 (file)
@@ -688,14 +688,6 @@ void __init acpi_early_init(void)
        if (acpi_disabled)
                return;
 
-       /*
-        * ACPI CA initializes acpi_dbg_level to non-zero, which means
-        * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
-        * Turn it off so we don't get output unless the user specifies
-        * acpi.debug_level.
-        */
-       acpi_dbg_level = 0;
-
        printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
 
        /* enable workarounds, unless strict ACPI spec. compliance */
index 25f531d..40e60fc 100644 (file)
@@ -824,32 +824,36 @@ static int __init toshiba_acpi_init(void)
                        toshiba_acpi_exit();
                        return -ENOMEM;
                }
-       }
 
-       /* Register input device for kill switch */
-       toshiba_acpi.poll_dev = input_allocate_polled_device();
-       if (!toshiba_acpi.poll_dev) {
-               printk(MY_ERR "unable to allocate kill-switch input device\n");
-               toshiba_acpi_exit();
-               return -ENOMEM;
-       }
-       toshiba_acpi.poll_dev->private = &toshiba_acpi;
-       toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
-       toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
-       toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
-       toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
-       toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
-       set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
-       set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
-       input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
-       input_sync(toshiba_acpi.poll_dev->input);
-
-       ret = input_register_polled_device(toshiba_acpi.poll_dev);
-       if (ret) {
-               printk(MY_ERR "unable to register kill-switch input device\n");
-               toshiba_acpi_exit();
-               return ret;
+               /* Register input device for kill switch */
+               toshiba_acpi.poll_dev = input_allocate_polled_device();
+               if (!toshiba_acpi.poll_dev) {
+                       printk(MY_ERR
+                              "unable to allocate kill-switch input device\n");
+                       toshiba_acpi_exit();
+                       return -ENOMEM;
+               }
+               toshiba_acpi.poll_dev->private = &toshiba_acpi;
+               toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+               toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+               toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+               toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+               /* Toshiba USB ID */
+               toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+               set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+               set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+               input_report_switch(toshiba_acpi.poll_dev->input,
+                                   SW_RFKILL_ALL, TRUE);
+               input_sync(toshiba_acpi.poll_dev->input);
+
+               ret = input_register_polled_device(toshiba_acpi.poll_dev);
+               if (ret) {
+                       printk(MY_ERR
+                              "unable to register kill-switch input device\n");
+                       toshiba_acpi_exit();
+                       return ret;
+               }
        }
 
        return 0;
index 670551b..17ed5ac 100644 (file)
@@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT;
 
 /* Debug switch - layer (component) mask */
 
-u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS;
+u32 acpi_dbg_layer = 0;
 u32 acpi_gbl_nesting_level = 0;
 
 /* Debugger globals */
index 5e2eb74..bc6695e 100644 (file)
@@ -4050,17 +4050,70 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
        { "ST3160023AS",        "3.42",         ATA_HORKAGE_NONCQ },
 
        /* Seagate NCQ + FLUSH CACHE firmware bug */
-       { "ST31500341AS",       "9JU138",       ATA_HORKAGE_NONCQ |
+       { "ST31500341AS",       "SD15",         ATA_HORKAGE_NONCQ |
                                                ATA_HORKAGE_FIRMWARE_WARN },
-       { "ST31000333AS",       "9FZ136",       ATA_HORKAGE_NONCQ |
+       { "ST31500341AS",       "SD16",         ATA_HORKAGE_NONCQ |
                                                ATA_HORKAGE_FIRMWARE_WARN },
-       { "ST3640623AS",        "9FZ164",       ATA_HORKAGE_NONCQ |
+       { "ST31500341AS",       "SD17",         ATA_HORKAGE_NONCQ |
                                                ATA_HORKAGE_FIRMWARE_WARN },
-       { "ST3640323AS",        "9FZ134",       ATA_HORKAGE_NONCQ |
+       { "ST31500341AS",       "SD18",         ATA_HORKAGE_NONCQ |
                                                ATA_HORKAGE_FIRMWARE_WARN },
-       { "ST3320813AS",        "9FZ182",       ATA_HORKAGE_NONCQ |
+       { "ST31500341AS",       "SD19",         ATA_HORKAGE_NONCQ |
                                                ATA_HORKAGE_FIRMWARE_WARN },
-       { "ST3320613AS",        "9FZ162",       ATA_HORKAGE_NONCQ |
+
+       { "ST31000333AS",       "SD15",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST31000333AS",       "SD16",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST31000333AS",       "SD17",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST31000333AS",       "SD18",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST31000333AS",       "SD19",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+
+       { "ST3640623AS",        "SD15",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3640623AS",        "SD16",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3640623AS",        "SD17",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3640623AS",        "SD18",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3640623AS",        "SD19",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+
+       { "ST3640323AS",        "SD15",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3640323AS",        "SD16",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3640323AS",        "SD17",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3640323AS",        "SD18",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3640323AS",        "SD19",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+
+       { "ST3320813AS",        "SD15",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3320813AS",        "SD16",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3320813AS",        "SD17",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3320813AS",        "SD18",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3320813AS",        "SD19",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+
+       { "ST3320613AS",        "SD15",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3320613AS",        "SD16",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3320613AS",        "SD17",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3320613AS",        "SD18",         ATA_HORKAGE_NONCQ |
+                                               ATA_HORKAGE_FIRMWARE_WARN },
+       { "ST3320613AS",        "SD19",         ATA_HORKAGE_NONCQ |
                                                ATA_HORKAGE_FIRMWARE_WARN },
 
        /* Blacklist entries taken from Silicon Image 3124/3132
index a098ba8..e0c4f05 100644 (file)
@@ -183,7 +183,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
                        mask &= ~(0xF8 << ATA_SHIFT_UDMA);
                if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
                        mask &= ~(0xF0 << ATA_SHIFT_UDMA);
-       }
+       } else if (adev->class == ATA_DEV_ATAPI)
+               mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
        return ata_bmdma_mode_filter(adev, mask);
 }
 
@@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 
 static int hpt36x_cable_detect(struct ata_port *ap)
 {
-       u8 ata66;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+       u8 ata66;
 
+       /*
+        * Each channel of pata_hpt366 occupies separate PCI function
+        * as the primary channel and bit1 indicates the cable type.
+        */
        pci_read_config_byte(pdev, 0x5A, &ata66);
-       if (ata66 & (1 << ap->port_no))
+       if (ata66 & 2)
                return ATA_CBL_PATA40;
        return ATA_CBL_PATA80;
 }
index 9364dc5..9f7c543 100644 (file)
@@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
        for (i = 0; i <= h->highest_lun; i++) {
                int j;
                drv_found = 0;
+
+               /* skip holes in the array from already deleted drives */
+               if (h->drv[i].raid_level == -1)
+                       continue;
+
                for (j = 0; j < num_luns; j++) {
                        memcpy(&lunid, &ld_buff->LUN[j][0], 4);
                        lunid = le32_to_cpu(lunid);
index d16b024..7d2e91c 100644 (file)
@@ -2081,10 +2081,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
        if (!q)
                return -ENXIO;
 
-       rq = blk_get_request(q, READ, GFP_KERNEL);
-       if (!rq)
-               return -ENOMEM;
-
        cdi->last_sense = 0;
 
        while (nframes) {
@@ -2096,9 +2092,17 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
 
                len = nr * CD_FRAMESIZE_RAW;
 
+               rq = blk_get_request(q, READ, GFP_KERNEL);
+               if (!rq) {
+                       ret = -ENOMEM;
+                       break;
+               }
+
                ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL);
-               if (ret)
+               if (ret) {
+                       blk_put_request(rq);
                        break;
+               }
 
                rq->cmd[0] = GPCMD_READ_CD;
                rq->cmd[1] = 1 << 2;
@@ -2124,6 +2128,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
 
                if (blk_rq_unmap_user(bio))
                        ret = -EFAULT;
+               blk_put_request(rq);
 
                if (ret)
                        break;
@@ -2133,7 +2138,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
                ubuf += len;
        }
 
-       blk_put_request(rq);
        return ret;
 }
 
index 1f06889..bc61634 100644 (file)
@@ -27,7 +27,7 @@
 0x0c   U+2640
 0x0d   U+266a
 0x0e   U+266b
-0x0f   U+263c
+0x0f   U+263c U+00a4
 0x10   U+25b6 U+25ba
 0x11   U+25c0 U+25c4
 0x12   U+2195
@@ -55,7 +55,7 @@
 0x24   U+0024
 0x25   U+0025
 0x26   U+0026
-0x27   U+0027
+0x27   U+0027 U+00b4
 0x28   U+0028
 0x29   U+0029
 0x2a   U+002a
@@ -84,7 +84,7 @@
 0x41   U+0041 U+00c0 U+00c1 U+00c2 U+00c3
 0x42   U+0042
 0x43   U+0043 U+00a9
-0x44   U+0044
+0x44   U+0044 U+00d0
 0x45   U+0045 U+00c8 U+00ca U+00cb
 0x46   U+0046
 0x47   U+0047
 0x79   U+0079 U+00fd
 0x7a   U+007a
 0x7b   U+007b
-0x7c   U+007c U+00a5
+0x7c   U+007c U+00a6
 0x7d   U+007d
 0x7e   U+007e
 #
 0xe8   U+03a6 U+00d8
 0xe9   U+0398
 0xea   U+03a9 U+2126
-0xeb   U+03b4
+0xeb   U+03b4 U+00f0
 0xec   U+221e
 0xed   U+03c6 U+00f8
-0xee   U+03b5
+0xee   U+03b5 U+2208
 0xef   U+2229
 0xf0   U+2261
 0xf1   U+00b1
index a5af607..008176e 100644 (file)
@@ -2274,7 +2274,7 @@ rescan_last_byte:
                                    continue; /* nothing to display */
                                }
                                /* Glyph not found */
-                               if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
+                               if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
                                    /* In legacy mode use the glyph we get by a 1:1 mapping.
                                       This would make absolutely no sense with Unicode in mind,
                                       but do this for ASCII characters since a font may lack
index aa7f796..05d8977 100644 (file)
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *
index 8b0252b..d4f419e 100644 (file)
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *
index 776b505..02225eb 100644 (file)
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *
index 62bda45..4c9dd9a 100644 (file)
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *
index d161319..f40ab69 100644 (file)
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2007-2008 Xilinx Inc.
index 24d0d9b..8cca119 100644 (file)
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2007 Xilinx Inc.
  *     All rights reserved.
  *
index 5317e08..6579965 100644 (file)
@@ -388,7 +388,10 @@ int dma_async_device_register(struct dma_device *device)
 
        init_completion(&device->done);
        kref_init(&device->refcount);
+
+       mutex_lock(&dma_list_mutex);
        device->dev_id = id++;
+       mutex_unlock(&dma_list_mutex);
 
        /* represent channels in sysfs. Probably want devs too */
        list_for_each_entry(chan, &device->channels, device_node) {
index ecd743f..6607fdd 100644 (file)
@@ -1341,10 +1341,12 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan)
  */
 #define IOAT_TEST_SIZE 2000
 
+DECLARE_COMPLETION(test_completion);
 static void ioat_dma_test_callback(void *dma_async_param)
 {
        printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n",
                dma_async_param);
+       complete(&test_completion);
 }
 
 /**
@@ -1410,7 +1412,8 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
                goto free_resources;
        }
        device->common.device_issue_pending(dma_chan);
-       msleep(1);
+
+       wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000));
 
        if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
                                        != DMA_SUCCESS) {
index c7a9306..6be3172 100644 (file)
@@ -85,18 +85,28 @@ iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc,
                        enum dma_ctrl_flags flags = desc->async_tx.flags;
                        u32 src_cnt;
                        dma_addr_t addr;
+                       dma_addr_t dest;
 
+                       src_cnt = unmap->unmap_src_cnt;
+                       dest = iop_desc_get_dest_addr(unmap, iop_chan);
                        if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
-                               addr = iop_desc_get_dest_addr(unmap, iop_chan);
-                               dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+                               enum dma_data_direction dir;
+
+                               if (src_cnt > 1) /* is xor? */
+                                       dir = DMA_BIDIRECTIONAL;
+                               else
+                                       dir = DMA_FROM_DEVICE;
+
+                               dma_unmap_page(dev, dest, len, dir);
                        }
 
                        if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
-                               src_cnt = unmap->unmap_src_cnt;
                                while (src_cnt--) {
                                        addr = iop_desc_get_src_addr(unmap,
                                                                     iop_chan,
                                                                     src_cnt);
+                                       if (addr == dest)
+                                               continue;
                                        dma_unmap_page(dev, addr, len,
                                                       DMA_TO_DEVICE);
                                }
index 0328da0..bcda174 100644 (file)
@@ -311,17 +311,26 @@ mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc,
                        enum dma_ctrl_flags flags = desc->async_tx.flags;
                        u32 src_cnt;
                        dma_addr_t addr;
+                       dma_addr_t dest;
 
+                       src_cnt = unmap->unmap_src_cnt;
+                       dest = mv_desc_get_dest_addr(unmap);
                        if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
-                               addr = mv_desc_get_dest_addr(unmap);
-                               dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+                               enum dma_data_direction dir;
+
+                               if (src_cnt > 1) /* is xor ? */
+                                       dir = DMA_BIDIRECTIONAL;
+                               else
+                                       dir = DMA_FROM_DEVICE;
+                               dma_unmap_page(dev, dest, len, dir);
                        }
 
                        if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
-                               src_cnt = unmap->unmap_src_cnt;
                                while (src_cnt--) {
                                        addr = mv_desc_get_src_addr(unmap,
                                                                    src_cnt);
+                                       if (addr == dest)
+                                               continue;
                                        dma_unmap_page(dev, addr, len,
                                                       DMA_TO_DEVICE);
                                }
index 5fcd3d8..4041e91 100644 (file)
@@ -394,6 +394,12 @@ static void edac_device_workq_function(struct work_struct *work_req)
 
        mutex_lock(&device_ctls_mutex);
 
+       /* If we are being removed, bail out immediately */
+       if (edac_dev->op_state == OP_OFFLINE) {
+               mutex_unlock(&device_ctls_mutex);
+               return;
+       }
+
        /* Only poll controllers that are running polled and have a check */
        if ((edac_dev->op_state == OP_RUNNING_POLL) &&
                (edac_dev->edac_check != NULL)) {
@@ -585,14 +591,14 @@ struct edac_device_ctl_info *edac_device_del_device(struct device *dev)
        /* mark this instance as OFFLINE */
        edac_dev->op_state = OP_OFFLINE;
 
-       /* clear workq processing on this instance */
-       edac_device_workq_teardown(edac_dev);
-
        /* deregister from global list */
        del_edac_device_from_global_list(edac_dev);
 
        mutex_unlock(&device_ctls_mutex);
 
+       /* clear workq processing on this instance */
+       edac_device_workq_teardown(edac_dev);
+
        /* Tear down the sysfs entries for this instance */
        edac_device_remove_sysfs(edac_dev);
 
index 553dd4b..afa8a12 100644 (file)
@@ -717,7 +717,7 @@ static int i915_getparam(struct drm_device *dev, void *data,
                value = dev->pci_device;
                break;
        case I915_PARAM_HAS_GEM:
-               value = 1;
+               value = dev_priv->has_gem;
                break;
        default:
                DRM_ERROR("Unknown parameter %d\n", param->param);
@@ -830,6 +830,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
        dev_priv->regs = ioremap(base, size);
 
+#ifdef CONFIG_HIGHMEM64G
+       /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
+       dev_priv->has_gem = 0;
+#else
+       /* enable GEM by default */
+       dev_priv->has_gem = 1;
+#endif
+
        i915_gem_load(dev);
 
        /* Init HWS */
index adc972c..b3cc473 100644 (file)
@@ -106,6 +106,8 @@ struct intel_opregion {
 typedef struct drm_i915_private {
        struct drm_device *dev;
 
+       int has_gem;
+
        void __iomem *regs;
        drm_local_map_t *sarea;
 
index ad672d8..24fe8c1 100644 (file)
@@ -2309,7 +2309,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
        }
 
        obj_priv = obj->driver_private;
-       args->busy = obj_priv->active;
+       /* Don't count being on the flushing list against the object being
+        * done.  Otherwise, a buffer left on the flushing list but not getting
+        * flushed (because nobody's flushing that domain) won't ever return
+        * unbusy and get reused by libdrm's bo cache.  The other expected
+        * consumer of this interface, OpenGL's occlusion queries, also specs
+        * that the objects get unbusy "eventually" without any interference.
+        */
+       args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0;
 
        drm_gem_object_unreference(obj);
        mutex_unlock(&dev->struct_mutex);
index 99be114..8289e16 100644 (file)
@@ -44,7 +44,7 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state)
        else
                dev_priv->irq_enable_reg &= ~mask;
 
-       if (!dev->irq_enabled)
+       if (dev->irq_enabled)
                RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
 }
 
@@ -57,7 +57,7 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
        else
                dev_priv->r500_disp_irq_reg &= ~mask;
 
-       if (!dev->irq_enabled)
+       if (dev->irq_enabled)
                RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
 }
 
index 228f757..3fcf78e 100644 (file)
@@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
                pmsg = &msgs[tptr];
                if (pmsg->flags & I2C_M_RD)
                        ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+                               (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
                                !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
                                1 * HZ);
                else
index f4d22ae..e5a8dae 100644 (file)
@@ -92,7 +92,7 @@ static void highlander_i2c_setup(struct highlander_i2c_dev *dev)
 static void smbus_write_data(u8 *src, u16 *dst, int len)
 {
        for (; len > 1; len -= 2) {
-               *dst++ = be16_to_cpup((u16 *)src);
+               *dst++ = be16_to_cpup((__be16 *)src);
                src += 2;
        }
 
@@ -103,7 +103,7 @@ static void smbus_write_data(u8 *src, u16 *dst, int len)
 static void smbus_read_data(u16 *src, u8 *dst, int len)
 {
        for (; len > 1; len -= 2) {
-               *(u16 *)dst = cpu_to_be16p(src++);
+               *(__be16 *)dst = cpu_to_be16p(src++);
                dst += 2;
        }
 
index dcf2045..0bdb2d7 100644 (file)
@@ -486,7 +486,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
 
        if (cmd->type == MSP_TWI_CMD_WRITE ||
            cmd->type == MSP_TWI_CMD_WRITE_READ) {
-               __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
+               u64 tmp = be64_to_cpup((__be64 *)cmd->write_data);
                tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
                dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
                pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
index 1fac4e2..b7434d2 100644 (file)
@@ -56,6 +56,7 @@ enum s3c24xx_i2c_state {
 struct s3c24xx_i2c {
        spinlock_t              lock;
        wait_queue_head_t       wait;
+       unsigned int            suspended:1;
 
        struct i2c_msg          *msg;
        unsigned int            msg_num;
@@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
        unsigned long timeout;
        int ret;
 
-       if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
+       if (i2c->suspended)
                return -EIO;
 
        ret = s3c24xx_i2c_set_master(i2c);
@@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
+static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
+                                   pm_message_t msg)
+{
+       struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
+       i2c->suspended = 1;
+       return 0;
+}
+
 static int s3c24xx_i2c_resume(struct platform_device *dev)
 {
        struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
 
-       if (i2c != NULL)
-               s3c24xx_i2c_init(i2c);
+       i2c->suspended = 0;
+       s3c24xx_i2c_init(i2c);
 
        return 0;
 }
 
 #else
+#define s3c24xx_i2c_suspend_late NULL
 #define s3c24xx_i2c_resume NULL
 #endif
 
@@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev)
 static struct platform_driver s3c2410_i2c_driver = {
        .probe          = s3c24xx_i2c_probe,
        .remove         = s3c24xx_i2c_remove,
+       .suspend_late   = s3c24xx_i2c_suspend_late,
        .resume         = s3c24xx_i2c_resume,
        .driver         = {
                .owner  = THIS_MODULE,
@@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = {
 static struct platform_driver s3c2440_i2c_driver = {
        .probe          = s3c24xx_i2c_probe,
        .remove         = s3c24xx_i2c_remove,
+       .suspend_late   = s3c24xx_i2c_suspend_late,
        .resume         = s3c24xx_i2c_resume,
        .driver         = {
                .owner  = THIS_MODULE,
index 53f079c..d8ede85 100644 (file)
@@ -81,11 +81,12 @@ static u8 cs5530_udma_filter(ide_drive_t *drive)
 {
        ide_hwif_t *hwif = drive->hwif;
        ide_drive_t *mate = ide_get_pair_dev(drive);
-       u16 *mateid = mate->id;
+       u16 *mateid;
        u8 mask = hwif->ultra_mask;
 
        if (mate == NULL)
                goto out;
+       mateid = mate->id;
 
        if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
                if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
index f1a8758..ec7f766 100644 (file)
@@ -104,11 +104,12 @@ static u8 sc1200_udma_filter(ide_drive_t *drive)
 {
        ide_hwif_t *hwif = drive->hwif;
        ide_drive_t *mate = ide_get_pair_dev(drive);
-       u16 *mateid = mate->id;
+       u16 *mateid;
        u8 mask = hwif->ultra_mask;
 
        if (mate == NULL)
                goto out;
+       mateid = mate->id;
 
        if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
                if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
index d333ae2..79ef5fd 100644 (file)
@@ -115,8 +115,14 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length,
        return error;
 }
 
+#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db
+
 static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci)
 {
+       /* Freecom FireWire Hard Drive firmware bug */
+       if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH)
+               return 0;
+
        return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3;
 }
 
index ac89a5d..ab7c8e4 100644 (file)
@@ -208,16 +208,19 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page)
  */
 
 /* IO operations when bitmap is stored near all superblocks */
-static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index)
+static struct page *read_sb_page(mddev_t *mddev, long offset,
+                                struct page *page,
+                                unsigned long index, int size)
 {
        /* choose a good rdev and read the page from there */
 
        mdk_rdev_t *rdev;
        struct list_head *tmp;
-       struct page *page = alloc_page(GFP_KERNEL);
        sector_t target;
 
        if (!page)
+               page = alloc_page(GFP_KERNEL);
+       if (!page)
                return ERR_PTR(-ENOMEM);
 
        rdev_for_each(rdev, tmp, mddev) {
@@ -227,7 +230,9 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde
 
                target = rdev->sb_start + offset + index * (PAGE_SIZE/512);
 
-               if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) {
+               if (sync_page_io(rdev->bdev, target,
+                                roundup(size, bdev_hardsect_size(rdev->bdev)),
+                                page, READ)) {
                        page->index = index;
                        attach_page_buffers(page, NULL); /* so that free_buffer will
                                                          * quietly no-op */
@@ -544,7 +549,9 @@ static int bitmap_read_sb(struct bitmap *bitmap)
 
                bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes);
        } else {
-               bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0);
+               bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset,
+                                              NULL,
+                                              0, sizeof(bitmap_super_t));
        }
        if (IS_ERR(bitmap->sb_page)) {
                err = PTR_ERR(bitmap->sb_page);
@@ -957,11 +964,16 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
                                 */
                                page = bitmap->sb_page;
                                offset = sizeof(bitmap_super_t);
+                               read_sb_page(bitmap->mddev, bitmap->offset,
+                                            page,
+                                            index, count);
                        } else if (file) {
                                page = read_page(file, index, bitmap, count);
                                offset = 0;
                        } else {
-                               page = read_sb_page(bitmap->mddev, bitmap->offset, index);
+                               page = read_sb_page(bitmap->mddev, bitmap->offset,
+                                                   NULL,
+                                                   index, count);
                                offset = 0;
                        }
                        if (IS_ERR(page)) { /* read error */
index 73dc2ee..b34301d 100644 (file)
@@ -9,11 +9,11 @@ config DVB_B2C2_FLEXCOP
        select DVB_STV0297 if !DVB_FE_CUSTOMISE
        select DVB_BCM3510 if !DVB_FE_CUSTOMISE
        select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
        select DVB_S5H1420 if !DVB_FE_CUSTOMISE
        select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
        select DVB_ISL6421 if !DVB_FE_CUSTOMISE
        select DVB_CX24123 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
        help
          Support for the digital TV receiver chip made by B2C2 Inc. included in
          Technisats PCI cards and USB boxes.
index a127a41..5cded37 100644 (file)
@@ -628,12 +628,14 @@ int flexcop_frontend_init(struct flexcop_device *fc)
        }
 
        /* try the cable dvb (stv0297) */
+       fc->fc_i2c_adap[0].no_base_addr = 1;
        fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
        if (fc->fe != NULL) {
                fc->dev_type = FC_CABLE;
                fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
                goto fe_found;
        }
+       fc->fc_i2c_adap[0].no_base_addr = 0;
 
        /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
        fc->fe = dvb_attach(mt312_attach,
index 43a112e..f13783f 100644 (file)
@@ -47,9 +47,13 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
        int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
                ret;
 
-       r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
        ret = flexcop_i2c_operation(i2c->fc, &r100);
        if (ret != 0) {
+               deb_i2c("Retrying operation\n");
+               r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+               ret = flexcop_i2c_operation(i2c->fc, &r100);
+       }
+       if (ret != 0) {
                deb_i2c("read failed. %d\n", ret);
                return ret;
        }
index 7e9c090..27edb0e 100644 (file)
@@ -8,7 +8,7 @@ config DVB_BT8XX
        select DVB_OR51211 if !DVB_FE_CUSTOMISE
        select DVB_LGDT330X if !DVB_FE_CUSTOMISE
        select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
        help
          Support for PCI cards based on the Bt8xx PCI bridge. Examples are
          the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
index 62b68c2..49f7b20 100644 (file)
@@ -24,8 +24,8 @@ config DVB_USB_A800
        tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
        depends on DVB_USB
        select DVB_DIB3000MC
-       select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
        select DVB_PLL if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
 
@@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB
        depends on DVB_USB
        select DVB_PLL if !DVB_FE_CUSTOMISE
        select DVB_DIB3000MB
-       select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
        help
          Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
          DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC
        tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
        depends on DVB_USB
        select DVB_DIB3000MC
-       select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
        help
          Support for USB2.0 DVB-T receivers based on reference designs made by
          DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@@ -73,11 +73,11 @@ config DVB_USB_DIB0700
        select DVB_DIB7000M
        select DVB_DIB3000MC
        select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
        select DVB_TUNER_DIB0070
+       select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
        help
          Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
          USB bridge is also present in devices having the DiB7700 DVB-T-USB
@@ -95,7 +95,7 @@ config DVB_USB_UMT_010
        depends on DVB_USB
        select DVB_PLL if !DVB_FE_CUSTOMISE
        select DVB_DIB3000MC
-       select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
@@ -107,11 +107,11 @@ config DVB_USB_CXUSB
        select DVB_LGDT330X if !DVB_FE_CUSTOMISE
        select DVB_MT352 if !DVB_FE_CUSTOMISE
        select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
        select DVB_DIB7000P if !DVB_FE_CUSTOMISE
        select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the Conexant USB2.0 hybrid reference design.
          Currently, only DVB and ATSC modes are supported, analog mode
@@ -124,9 +124,9 @@ config DVB_USB_M920X
        tristate "Uli m920x DVB-T USB2.0 support"
        depends on DVB_USB
        select DVB_MT352 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
        select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
          Currently, only devices with a product id of
@@ -137,7 +137,7 @@ config DVB_USB_GL861
        tristate "Genesys Logic GL861 USB2.0 support"
        depends on DVB_USB
        select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
          receiver with USB ID 0db0:5581.
@@ -146,7 +146,7 @@ config DVB_USB_AU6610
        tristate "Alcor Micro AU6610 USB2.0 support"
        depends on DVB_USB
        select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
 
@@ -198,8 +198,8 @@ config DVB_USB_NOVA_T_USB2
        tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
        depends on DVB_USB
        select DVB_DIB3000MC
-       select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
        select DVB_PLL if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
 
@@ -235,8 +235,8 @@ config DVB_USB_OPERA1
 config DVB_USB_AF9005
        tristate "Afatech AF9005 DVB-T USB1.1 support"
        depends on DVB_USB && EXPERIMENTAL
-       select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
          and the TerraTec Cinergy T USB XE (Rev.1)
@@ -284,7 +284,7 @@ config DVB_USB_DTV5100
        tristate "AME DTV-5100 USB2.0 DVB-T support"
        depends on DVB_USB
        select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
 
@@ -293,9 +293,9 @@ config DVB_USB_AF9015
        depends on DVB_USB && EXPERIMENTAL
        select DVB_AF9013
        select DVB_PLL              if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_MT2060   if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_QT1010   if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_MT2060   if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_QT1010   if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
        help
          Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
index f28d3ae..3917327 100644 (file)
@@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
                == NULL ? -ENODEV : 0;
 }
 
-#define DEFAULT_RC_INTERVAL 150
+#define DEFAULT_RC_INTERVAL 50
 
 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
 
 /* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY 2
-#define RC_REPEAT_DELAY_V1_20 5
+#define RC_REPEAT_DELAY 6
+#define RC_REPEAT_DELAY_V1_20 10
 
 
 
index 867027c..401a04e 100644 (file)
@@ -106,7 +106,7 @@ config DVB_BUDGET_CI
        select DVB_TDA1004X if !DVB_FE_CUSTOMISE
        select DVB_LNBP21 if !DVB_FE_CUSTOMISE
        select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
        select VIDEO_IR
        help
          Support for simple SAA7146 based DVB cards
index e6ca401..0ea85a0 100644 (file)
@@ -831,7 +831,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 {
        int ret = -ENOIOCTLCMD;
 
-       if (!file->f_op->ioctl)
+       if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl)
                return ret;
 
        switch (cmd) {
index ef48565..8940b53 100644 (file)
@@ -9,7 +9,7 @@ config VIDEO_CX18
        select VIDEO_CX2341X
        select VIDEO_CS5345
        select DVB_S5H1409 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
        ---help---
          This is a video4linux driver for Conexant cx23418 based
          PCI combo video recorder devices.
index 8c1b7fa..00f1e2e 100644 (file)
@@ -11,16 +11,16 @@ config VIDEO_CX23885
        select VIDEO_CX25840
        select VIDEO_CX2341X
        select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE
        select DVB_S5H1409 if !DVB_FE_CUSTOMISE
        select DVB_S5H1411 if !DVB_FE_CUSTOMISE
        select DVB_LGDT330X if !DVB_FE_CUSTOMISE
        select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+       select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
+       select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE
        select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
        select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
        select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
        select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
-       select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
        ---help---
          This is a video4linux driver for Conexant 23885 based
          TV cards.
index 0b9e5fa..b0f8375 100644 (file)
@@ -56,12 +56,12 @@ config VIDEO_CX88_DVB
        select DVB_NXT200X if !DVB_FE_CUSTOMISE
        select DVB_CX24123 if !DVB_FE_CUSTOMISE
        select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
        select DVB_S5H1411 if !DVB_FE_CUSTOMISE
        select DVB_CX24116 if !DVB_FE_CUSTOMISE
        select DVB_STV0299 if !DVB_FE_CUSTOMISE
        select DVB_STV0288 if !DVB_FE_CUSTOMISE
        select DVB_STB6000 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
        ---help---
          This adds support for DVB/ATSC cards based on the
          Conexant 2388x chip.
index 610f535..4ea1f1e 100644 (file)
@@ -549,10 +549,11 @@ static int em28xx_config(struct em28xx *dev)
 static void em28xx_config_i2c(struct em28xx *dev)
 {
        struct v4l2_routing route;
+       int zero = 0;
 
        route.input = INPUT(dev->ctl_input)->vmux;
        route.output = 0;
-       em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL);
+       em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero);
        em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
        em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
 }
index 748a87e..02a6e9e 100644 (file)
@@ -1264,10 +1264,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv,
        struct gspca_dev *gspca_dev = priv;
        int ret;
 
-       if (mutex_lock_interruptible(&gspca_dev->usb_lock))
-               return -ERESTARTSYS;
        if (!gspca_dev->sd_desc->set_jcomp)
                return -EINVAL;
+       if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+               return -ERESTARTSYS;
        ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp);
        mutex_unlock(&gspca_dev->usb_lock);
        return ret;
index 19eb274..854c2a8 100644 (file)
@@ -42,7 +42,7 @@ config VIDEO_PVRUSB2_DVB
        select DVB_S5H1411 if !DVB_FE_CUSTOMISE
        select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
        select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
-       select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
        select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
        ---help---
 
index 7021bbf..fc2164e 100644 (file)
@@ -34,9 +34,9 @@ config VIDEO_SAA7134_DVB
        select DVB_NXT200X if !DVB_FE_CUSTOMISE
        select DVB_TDA10086 if !DVB_FE_CUSTOMISE
        select DVB_TDA826X if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
        select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-       select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
+       select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
        ---help---
          This adds support for DVB cards based on the
          Philips saa7134 chip.
index d62fd4f..ee09041 100644 (file)
@@ -2008,6 +2008,9 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
                return FAILED;
        }
 
+       /* make sure we have no outstanding commands at this stage */
+       mptscsih_flush_running_cmds(hd);
+
        ioc = hd->ioc;
        printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
            ioc->name, SCpnt);
index a1a3d0e..9e8222f 100644 (file)
@@ -543,9 +543,9 @@ bnx2_free_rx_mem(struct bnx2 *bp)
                for (j = 0; j < bp->rx_max_pg_ring; j++) {
                        if (rxr->rx_pg_desc_ring[j])
                                pci_free_consistent(bp->pdev, RXBD_RING_SIZE,
-                                                   rxr->rx_pg_desc_ring[i],
-                                                   rxr->rx_pg_desc_mapping[i]);
-                       rxr->rx_pg_desc_ring[i] = NULL;
+                                                   rxr->rx_pg_desc_ring[j],
+                                                   rxr->rx_pg_desc_mapping[j]);
+                       rxr->rx_pg_desc_ring[j] = NULL;
                }
                if (rxr->rx_pg_ring)
                        vfree(rxr->rx_pg_ring);
index 523b971..d115a6d 100644 (file)
@@ -1893,12 +1893,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
                ctrl |= E1000_CTRL_PHY_RST;
        }
        ret_val = e1000_acquire_swflag_ich8lan(hw);
+       /* Whether or not the swflag was acquired, we need to reset the part */
        hw_dbg(hw, "Issuing a global reset to ich8lan");
        ew32(CTRL, (ctrl | E1000_CTRL_RST));
        msleep(20);
 
-       /* release the swflag because it is not reset by hardware reset */
-       e1000_release_swflag_ich8lan(hw);
+       if (!ret_val) {
+               /* release the swflag because it is not reset by
+                * hardware reset
+                */
+               e1000_release_swflag_ich8lan(hw);
+       }
 
        ret_val = e1000e_get_auto_rd_done(hw);
        if (ret_val) {
index c414554..36cb6e9 100644 (file)
@@ -959,7 +959,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
                        ndev->stats.rx_packets++;
                        ndev->stats.rx_bytes += len;
                        ndev->last_rx = jiffies;
-                       netif_rx(skb);
+                       netif_rx_ni(skb);
                }
        }
        /*
index f863aee..3f5d915 100644 (file)
@@ -22,7 +22,7 @@
  */
 
 #ifndef __JME_H_INCLUDED__
-#define __JME_H_INCLUDEE__
+#define __JME_H_INCLUDED__
 
 #define DRV_NAME       "jme"
 #define DRV_VERSION    "1.0.3"
index 536bda1..289fc26 100644 (file)
@@ -105,8 +105,6 @@ int mdiobus_register(struct mii_bus *bus)
                return -EINVAL;
        }
 
-       bus->state = MDIOBUS_REGISTERED;
-
        mutex_init(&bus->mdio_lock);
 
        if (bus->reset)
@@ -123,6 +121,9 @@ int mdiobus_register(struct mii_bus *bus)
                }
        }
 
+       if (!err)
+               bus->state = MDIOBUS_REGISTERED;
+
        pr_info("%s: probed\n", bus->name);
 
        return err;
index 7e857e9..714a230 100644 (file)
@@ -116,6 +116,7 @@ struct ppp {
        unsigned long   last_xmit;      /* jiffies when last pkt sent 9c */
        unsigned long   last_recv;      /* jiffies when last pkt rcvd a0 */
        struct net_device *dev;         /* network interface device a4 */
+       int             closing;        /* is device closing down? a8 */
 #ifdef CONFIG_PPP_MULTILINK
        int             nxchan;         /* next channel to send something on */
        u32             nxseq;          /* next sequence number to send */
@@ -995,7 +996,7 @@ ppp_xmit_process(struct ppp *ppp)
        struct sk_buff *skb;
 
        ppp_xmit_lock(ppp);
-       if (ppp->dev) {
+       if (!ppp->closing) {
                ppp_push(ppp);
                while (!ppp->xmit_pending
                       && (skb = skb_dequeue(&ppp->file.xq)))
@@ -1463,8 +1464,7 @@ static inline void
 ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 {
        ppp_recv_lock(ppp);
-       /* ppp->dev == 0 means interface is closing down */
-       if (ppp->dev)
+       if (!ppp->closing)
                ppp_receive_frame(ppp, skb, pch);
        else
                kfree_skb(skb);
@@ -2498,18 +2498,16 @@ init_ppp_file(struct ppp_file *pf, int kind)
  */
 static void ppp_shutdown_interface(struct ppp *ppp)
 {
-       struct net_device *dev;
-
        mutex_lock(&all_ppp_mutex);
-       ppp_lock(ppp);
-       dev = ppp->dev;
-       ppp->dev = NULL;
-       ppp_unlock(ppp);
        /* This will call dev_close() for us. */
-       if (dev) {
-               unregister_netdev(dev);
-               free_netdev(dev);
-       }
+       ppp_lock(ppp);
+       if (!ppp->closing) {
+               ppp->closing = 1;
+               ppp_unlock(ppp);
+               unregister_netdev(ppp->dev);
+       } else
+               ppp_unlock(ppp);
+
        cardmap_set(&all_ppp_units, ppp->file.index, NULL);
        ppp->file.dead = 1;
        ppp->owner = NULL;
@@ -2554,7 +2552,7 @@ static void ppp_destroy_interface(struct ppp *ppp)
        if (ppp->xmit_pending)
                kfree_skb(ppp->xmit_pending);
 
-       kfree(ppp);
+       free_netdev(ppp->dev);
 }
 
 /*
@@ -2616,7 +2614,7 @@ ppp_connect_channel(struct channel *pch, int unit)
        if (pch->file.hdrlen > ppp->file.hdrlen)
                ppp->file.hdrlen = pch->file.hdrlen;
        hdrlen = pch->file.hdrlen + 2;  /* for protocol bytes */
-       if (ppp->dev && hdrlen > ppp->dev->hard_header_len)
+       if (hdrlen > ppp->dev->hard_header_len)
                ppp->dev->hard_header_len = hdrlen;
        list_add_tail(&pch->clist, &ppp->channels);
        ++ppp->n_channels;
index 1d2ef8f..5a40f2d 100644 (file)
@@ -1509,6 +1509,11 @@ static int __netdev_rx(struct net_device *dev, int *quota)
                desc->status = 0;
                np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE;
        }
+
+       if (*quota == 0) {      /* out of rx quota */
+               retcode = 1;
+               goto out;
+       }
        writew(np->rx_done, np->base + CompletionQConsumerIdx);
 
  out:
index 1349e41..fed7eba 100644 (file)
@@ -1142,6 +1142,70 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev)
        return NETDEV_TX_OK;
 }
 
+static void gem_pcs_reset(struct gem *gp)
+{
+       int limit;
+       u32 val;
+
+       /* Reset PCS unit. */
+       val = readl(gp->regs + PCS_MIICTRL);
+       val |= PCS_MIICTRL_RST;
+       writel(val, gp->regs + PCS_MIICTRL);
+
+       limit = 32;
+       while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
+               udelay(100);
+               if (limit-- <= 0)
+                       break;
+       }
+       if (limit <= 0)
+               printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+                      gp->dev->name);
+}
+
+static void gem_pcs_reinit_adv(struct gem *gp)
+{
+       u32 val;
+
+       /* Make sure PCS is disabled while changing advertisement
+        * configuration.
+        */
+       val = readl(gp->regs + PCS_CFG);
+       val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
+       writel(val, gp->regs + PCS_CFG);
+
+       /* Advertise all capabilities except assymetric
+        * pause.
+        */
+       val = readl(gp->regs + PCS_MIIADV);
+       val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
+               PCS_MIIADV_SP | PCS_MIIADV_AP);
+       writel(val, gp->regs + PCS_MIIADV);
+
+       /* Enable and restart auto-negotiation, disable wrapback/loopback,
+        * and re-enable PCS.
+        */
+       val = readl(gp->regs + PCS_MIICTRL);
+       val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
+       val &= ~PCS_MIICTRL_WB;
+       writel(val, gp->regs + PCS_MIICTRL);
+
+       val = readl(gp->regs + PCS_CFG);
+       val |= PCS_CFG_ENABLE;
+       writel(val, gp->regs + PCS_CFG);
+
+       /* Make sure serialink loopback is off.  The meaning
+        * of this bit is logically inverted based upon whether
+        * you are in Serialink or SERDES mode.
+        */
+       val = readl(gp->regs + PCS_SCTRL);
+       if (gp->phy_type == phy_serialink)
+               val &= ~PCS_SCTRL_LOOP;
+       else
+               val |= PCS_SCTRL_LOOP;
+       writel(val, gp->regs + PCS_SCTRL);
+}
+
 #define STOP_TRIES 32
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1168,6 +1232,9 @@ static void gem_reset(struct gem *gp)
 
        if (limit <= 0)
                printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+
+       if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+               gem_pcs_reinit_adv(gp);
 }
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1324,7 +1391,7 @@ static int gem_set_link_modes(struct gem *gp)
                   gp->phy_type == phy_serdes) {
                u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
 
-               if (pcs_lpa & PCS_MIIADV_FD)
+               if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
                        full_duplex = 1;
                speed = SPEED_1000;
        }
@@ -1488,6 +1555,9 @@ static void gem_link_timer(unsigned long data)
                        val = readl(gp->regs + PCS_MIISTAT);
 
                if ((val & PCS_MIISTAT_LS) != 0) {
+                       if (gp->lstate == link_up)
+                               goto restart;
+
                        gp->lstate = link_up;
                        netif_carrier_on(gp->dev);
                        (void)gem_set_link_modes(gp);
@@ -1708,61 +1778,8 @@ static void gem_init_phy(struct gem *gp)
                if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
                        gp->phy_mii.def->ops->init(&gp->phy_mii);
        } else {
-               u32 val;
-               int limit;
-
-               /* Reset PCS unit. */
-               val = readl(gp->regs + PCS_MIICTRL);
-               val |= PCS_MIICTRL_RST;
-               writel(val, gp->regs + PCS_MIICTRL);
-
-               limit = 32;
-               while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
-                       udelay(100);
-                       if (limit-- <= 0)
-                               break;
-               }
-               if (limit <= 0)
-                       printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
-                              gp->dev->name);
-
-               /* Make sure PCS is disabled while changing advertisement
-                * configuration.
-                */
-               val = readl(gp->regs + PCS_CFG);
-               val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
-               writel(val, gp->regs + PCS_CFG);
-
-               /* Advertise all capabilities except assymetric
-                * pause.
-                */
-               val = readl(gp->regs + PCS_MIIADV);
-               val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
-                       PCS_MIIADV_SP | PCS_MIIADV_AP);
-               writel(val, gp->regs + PCS_MIIADV);
-
-               /* Enable and restart auto-negotiation, disable wrapback/loopback,
-                * and re-enable PCS.
-                */
-               val = readl(gp->regs + PCS_MIICTRL);
-               val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
-               val &= ~PCS_MIICTRL_WB;
-               writel(val, gp->regs + PCS_MIICTRL);
-
-               val = readl(gp->regs + PCS_CFG);
-               val |= PCS_CFG_ENABLE;
-               writel(val, gp->regs + PCS_CFG);
-
-               /* Make sure serialink loopback is off.  The meaning
-                * of this bit is logically inverted based upon whether
-                * you are in Serialink or SERDES mode.
-                */
-               val = readl(gp->regs + PCS_SCTRL);
-               if (gp->phy_type == phy_serialink)
-                       val &= ~PCS_SCTRL_LOOP;
-               else
-                       val |= PCS_SCTRL_LOOP;
-               writel(val, gp->regs + PCS_SCTRL);
+               gem_pcs_reset(gp);
+               gem_pcs_reinit_adv(gp);
        }
 
        /* Default aneg parameters */
@@ -2680,6 +2697,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                cmd->speed = 0;
                cmd->duplex = cmd->port = cmd->phy_address =
                        cmd->transceiver = cmd->autoneg = 0;
+
+               /* serdes means usually a Fibre connector, with most fixed */
+               if (gp->phy_type == phy_serdes) {
+                       cmd->port = PORT_FIBRE;
+                       cmd->supported = (SUPPORTED_1000baseT_Half |
+                               SUPPORTED_1000baseT_Full |
+                               SUPPORTED_FIBRE | SUPPORTED_Autoneg |
+                               SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+                       cmd->advertising = cmd->supported;
+                       cmd->transceiver = XCVR_INTERNAL;
+                       if (gp->lstate == link_up)
+                               cmd->speed = SPEED_1000;
+                       cmd->duplex = DUPLEX_FULL;
+                       cmd->autoneg = 1;
+               }
        }
        cmd->maxtxpkt = cmd->maxrxpkt = 0;
 
index c41d687..e604982 100644 (file)
@@ -1098,6 +1098,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
        dma_addr_t      tail_list_phys;
        u8              *tail_buffer;
        unsigned long   flags;
+       unsigned int    txlen;
 
        if ( ! priv->phyOnline ) {
                TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s PHY is not ready\n",
@@ -1108,6 +1109,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 
        if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
                return 0;
+       txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
 
        tail_list = priv->txList + priv->txTail;
        tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
@@ -1125,16 +1127,16 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 
        if ( bbuf ) {
                tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
-               skb_copy_from_linear_data(skb, tail_buffer, skb->len);
+               skb_copy_from_linear_data(skb, tail_buffer, txlen);
        } else {
                tail_list->buffer[0].address = pci_map_single(priv->pciDev,
-                                                             skb->data, skb->len,
+                                                             skb->data, txlen,
                                                              PCI_DMA_TODEVICE);
                TLan_StoreSKB(tail_list, skb);
        }
 
-       tail_list->frameSize = (u16) skb->len;
-       tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+       tail_list->frameSize = (u16) txlen;
+       tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
        tail_list->buffer[1].count = 0;
        tail_list->buffer[1].address = 0;
 
@@ -1431,7 +1433,9 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
                if ( ! bbuf ) {
                        struct sk_buff *skb = TLan_GetSKB(head_list);
                        pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
-                                        skb->len, PCI_DMA_TODEVICE);
+                                        max(skb->len,
+                                            (unsigned int)TLAN_MIN_FRAME_SIZE),
+                                        PCI_DMA_TODEVICE);
                        dev_kfree_skb_any(skb);
                        head_list->buffer[8].address = 0;
                        head_list->buffer[9].address = 0;
@@ -2055,9 +2059,12 @@ static void TLan_FreeLists( struct net_device *dev )
                        list = priv->txList + i;
                        skb = TLan_GetSKB(list);
                        if ( skb ) {
-                               pci_unmap_single(priv->pciDev,
-                                                list->buffer[0].address, skb->len,
-                                                PCI_DMA_TODEVICE);
+                               pci_unmap_single(
+                                       priv->pciDev,
+                                       list->buffer[0].address,
+                                       max(skb->len,
+                                           (unsigned int)TLAN_MIN_FRAME_SIZE),
+                                       PCI_DMA_TODEVICE);
                                dev_kfree_skb_any( skb );
                                list->buffer[8].address = 0;
                                list->buffer[9].address = 0;
index f9e244d..9bcb6cb 100644 (file)
@@ -113,7 +113,7 @@ struct acpiphp_slot {
 
        u8              device;         /* pci device# */
 
-       u32             sun;            /* ACPI _SUN (slot unique number) */
+       unsigned long long sun;         /* ACPI _SUN (slot unique number) */
        u32             flags;          /* see below */
 };
 
index 95b536a..43c10bd 100644 (file)
@@ -337,7 +337,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
        slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
        acpiphp_slot->slot = slot;
-       snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun);
+       snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
 
        retval = pci_hp_register(slot->hotplug_slot,
                                        acpiphp_slot->bridge->pci_bus,
index 955aae4..3affc64 100644 (file)
@@ -255,13 +255,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 
                bridge->nr_slots++;
 
-               dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n",
+               dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
                                slot->sun, pci_domain_nr(bridge->pci_bus),
                                bridge->pci_bus->number, slot->device);
                retval = acpiphp_register_hotplug_slot(slot);
                if (retval) {
                        if (retval == -EBUSY)
-                               warn("Slot %d already registered by another "
+                               warn("Slot %llu already registered by another "
                                        "hotplug driver\n", slot->sun);
                        else
                                warn("acpiphp_register_hotplug_slot failed "
index c892daa..633e743 100644 (file)
@@ -1402,10 +1402,6 @@ static int __init ibmphp_init(void)
                goto error;
        }
 
-       /* lock ourselves into memory with a module 
-        * count of -1 so that no one can unload us. */
-       module_put(THIS_MODULE);
-
 exit:
        return rc;
 
@@ -1423,4 +1419,3 @@ static void __exit ibmphp_exit(void)
 }
 
 module_init(ibmphp_init);
-module_exit(ibmphp_exit);
index 4b23bc3..39cf248 100644 (file)
@@ -432,18 +432,19 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
                goto err_out_release_ctlr;
        }
 
+       /* Check if slot is occupied */
        t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-
-       t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
-       if (value && pciehp_force) {
-               rc = pciehp_enable_slot(t_slot);
-               if (rc) /* -ENODEV: shouldn't happen, but deal with it */
-                       value = 0;
-       }
-       if ((POWER_CTRL(ctrl)) && !value) {
-               rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
-               if (rc)
-                       goto err_out_free_ctrl_slot;
+       t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+       if (value) {
+               if (pciehp_force)
+                       pciehp_enable_slot(t_slot);
+       } else {
+               /* Power off slot if not occupied */
+               if (POWER_CTRL(ctrl)) {
+                       rc = t_slot->hpc_ops->power_off_slot(t_slot);
+                       if (rc)
+                               goto err_out_free_ctrl_slot;
+               }
        }
 
        return 0;
index dfc63d0..aac7006 100644 (file)
@@ -252,7 +252,7 @@ static void report_resume(struct pci_dev *dev, void *data)
 
        if (!dev->driver ||
                !dev->driver->err_handler ||
-               !dev->driver->err_handler->slot_reset)
+               !dev->driver->err_handler->resume)
                return;
 
        err_handler = dev->driver->err_handler;
index bb73388..b59d411 100644 (file)
@@ -334,6 +334,6 @@ static void __exit bfin_cf_exit(void)
 module_init(bfin_cf_init);
 module_exit(bfin_cf_exit);
 
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>")
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
 MODULE_LICENSE("GPL");
index 2cd77ab..054e052 100644 (file)
@@ -328,6 +328,13 @@ isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
        int sr;
        u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 
+       /* The clock has an 8 bit wide bcd-coded register (they never learn)
+        * for the year. tm_year is an offset from 1900 and we are interested
+        * in the 2000-2099 range, so any value less than 100 is invalid.
+        */
+       if (tm->tm_year < 100)
+               return -EINVAL;
+
        regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
        regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
        regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
index 162cd92..94acbee 100644 (file)
@@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drivers[] = {
        { aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
        { aac_rx_init, "aacraid",  "ADAPTEC ", "catapult        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
        { aac_rx_init, "aacraid",  "ADAPTEC ", "tomcat          ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
-       { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
-       { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
+       { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },                     /* Adaptec 2120S (Crusader) */
+       { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },                     /* Adaptec 2200S (Vulcan) */
        { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
        { aac_rx_init, "aacraid",  "Legend  ", "Legend S220     ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
        { aac_rx_init, "aacraid",  "Legend  ", "Legend S230     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
index 9aec4ca..f7da753 100644 (file)
@@ -107,6 +107,7 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
        struct request *req;
        int ret;
 
+retry:
        req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
        if (!req)
                return SCSI_DH_RES_TEMP_UNAVAIL;
@@ -121,7 +122,6 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
        memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
        req->sense_len = 0;
 
-retry:
        ret = blk_execute_rq(req->q, NULL, req, 1);
        if (ret == -EIO) {
                if (req->sense_len > 0) {
@@ -136,8 +136,10 @@ retry:
                h->path_state = HP_SW_PATH_ACTIVE;
                ret = SCSI_DH_OK;
        }
-       if (ret == SCSI_DH_IMM_RETRY)
+       if (ret == SCSI_DH_IMM_RETRY) {
+               blk_put_request(req);
                goto retry;
+       }
        if (ret == SCSI_DH_DEV_OFFLINED) {
                h->path_state = HP_SW_PATH_PASSIVE;
                ret = SCSI_DH_OK;
@@ -200,6 +202,7 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
        struct request *req;
        int ret, retry;
 
+retry:
        req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
        if (!req)
                return SCSI_DH_RES_TEMP_UNAVAIL;
@@ -216,7 +219,6 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
        req->sense_len = 0;
        retry = h->retries;
 
-retry:
        ret = blk_execute_rq(req->q, NULL, req, 1);
        if (ret == -EIO) {
                if (req->sense_len > 0) {
@@ -231,8 +233,10 @@ retry:
                ret = SCSI_DH_OK;
 
        if (ret == SCSI_DH_RETRY) {
-               if (--retry)
+               if (--retry) {
+                       blk_put_request(req);
                        goto retry;
+               }
                ret = SCSI_DH_IO;
        }
 
index 2a5b29d..e2dd6a4 100644 (file)
@@ -864,21 +864,23 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id)
 
        INIT_WORK(&vport->crq_work, handle_crq);
 
-       err = crq_queue_create(&vport->crq_queue, target);
+       err = scsi_add_host(shost, target->dev);
        if (err)
                goto free_srp_target;
 
-       err = scsi_add_host(shost, target->dev);
+       err = scsi_tgt_alloc_queue(shost);
        if (err)
-               goto destroy_queue;
+               goto remove_host;
 
-       err = scsi_tgt_alloc_queue(shost);
+       err = crq_queue_create(&vport->crq_queue, target);
        if (err)
-               goto destroy_queue;
+               goto free_queue;
 
        return 0;
-destroy_queue:
-       crq_queue_destroy(target);
+free_queue:
+       scsi_tgt_free_queue(shost);
+remove_host:
+       scsi_remove_host(shost);
 free_srp_target:
        srp_target_free(target);
 put_host:
index 801c7cf..3fdee73 100644 (file)
@@ -489,12 +489,6 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
                if (!__kfifo_get(session->cmdpool.queue,
                                 (void*)&task, sizeof(void*)))
                        return NULL;
-
-               if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) &&
-                    hdr->ttt == RESERVED_ITT) {
-                       conn->ping_task = task;
-                       conn->last_ping = jiffies;
-               }
        }
        /*
         * released in complete pdu for task we expect a response for, and
@@ -703,6 +697,11 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
        task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
        if (!task)
                iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
+       else if (!rhdr) {
+               /* only track our nops */
+               conn->ping_task = task;
+               conn->last_ping = jiffies;
+       }
 }
 
 static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
index fa45a1a..148d3af 100644 (file)
@@ -648,8 +648,8 @@ static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
        struct request *req = cmd->request;
        unsigned long flags;
 
-       scsi_unprep_request(req);
        spin_lock_irqsave(q->queue_lock, flags);
+       scsi_unprep_request(req);
        blk_requeue_request(q, req);
        spin_unlock_irqrestore(q->queue_lock, flags);
 
index d1812d3..63f0de2 100644 (file)
@@ -827,7 +827,7 @@ static int __init maple_bus_init(void)
 
        maple_queue_cache =
            kmem_cache_create("maple_queue_cache", 0x400, 0,
-                             SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL);
+                             SLAB_HWCACHE_ALIGN, NULL);
 
        if (!maple_queue_cache)
                goto cleanup_bothirqs;
index c95b286..5d457c9 100644 (file)
@@ -22,6 +22,8 @@ menuconfig STAGING
          If in doubt, say N here.
 
 
+if STAGING
+
 config STAGING_EXCLUDE_BUILD
        bool "Exclude Staging drivers from being built" if STAGING
        default y
@@ -62,3 +64,4 @@ source "drivers/staging/at76_usb/Kconfig"
 source "drivers/staging/poch/Kconfig"
 
 endif # !STAGING_EXCLUDE_BUILD
+endif # STAGING
index 8e74657..43a863c 100644 (file)
@@ -51,6 +51,7 @@ static struct usb_device_id usbtmc_devices[] = {
        { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
        { 0, } /* terminating entry */
 };
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
 
 /*
  * This structure is the capabilities for the device
index 3d7793d..8c08130 100644 (file)
@@ -279,7 +279,9 @@ static int usb_unbind_interface(struct device *dev)
         * altsetting means creating new endpoint device entries).
         * When either of these happens, defer the Set-Interface.
         */
-       if (!error && intf->dev.power.status == DPM_ON)
+       if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+               ;       /* Already in altsetting 0 so skip Set-Interface */
+       else if (!error && intf->dev.power.status == DPM_ON)
                usb_set_interface(udev, intf->altsetting[0].
                                desc.bInterfaceNumber, 0);
        else
index 428b599..3a8bb53 100644 (file)
@@ -651,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
                                fs_in_desc.bEndpointAddress;
                hs_out_desc.bEndpointAddress =
                                fs_out_desc.bEndpointAddress;
+               hs_notify_desc.bEndpointAddress =
+                               fs_notify_desc.bEndpointAddress;
 
                /* copy descriptors, and track endpoint copies */
                f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
@@ -662,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
                                f->hs_descriptors, &hs_in_desc);
                rndis->hs.out = usb_find_endpoint(eth_hs_function,
                                f->hs_descriptors, &hs_out_desc);
+               rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+                               f->hs_descriptors, &hs_notify_desc);
        }
 
        rndis->port.open = rndis_open;
index aad1359..fb6f293 100644 (file)
@@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -166,6 +167,7 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
        { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
        { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
index 07a3992..373ee09 100644 (file)
@@ -40,6 +40,9 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID       0xBFD8
 
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II          0xF0C8
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
index 491c885..1aed584 100644 (file)
@@ -91,6 +91,8 @@ static struct usb_device_id id_table [] = {
        { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
        { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
        { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+       { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+       { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
        { }                                     /* Terminating entry */
 };
 
index a3bd039..54974f4 100644 (file)
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID      0x05ad
 #define YCCABLE_PRODUCT_ID     0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID     0x5372
+#define SUPERIAL_PRODUCT_ID    0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID           0x03f0
+#define HP_LD220_PRODUCT_ID    0x3524
index 31c42d1..01d0c70 100644 (file)
  * For questions or problems with this driver, contact Texas Instruments
  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  * Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- *     exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- *     exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*}              # delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- *     s=$1
- *     shift
- *     for i
- *     do
- *             if [[ $s -eq $i ]]
- *             then
- *                     return 0
- *             fi
- *     done
- *     return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- *     echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
  */
 
 #include <linux/kernel.h>
@@ -457,9 +407,10 @@ static int ti_startup(struct usb_serial *serial)
                goto free_tdev;
        }
 
-       /* the second configuration must be set (in sysfs by hotplug script) */
+       /* the second configuration must be set */
        if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
-               status = -ENODEV;
+               status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+               status = status ? status : -ENODEV;
                goto free_tdev;
        }
 
index e61f2bf..bfcc1fe 100644 (file)
@@ -167,8 +167,22 @@ UNUSUAL_DEV(  0x0421, 0x005d, 0x0001, 0x0600,
                US_SC_DEVICE, US_PR_DEVICE, NULL,
                US_FL_FIX_CAPACITY ),
 
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0060, 0x0551, 0x0551,
+               "Nokia",
+               "3500c",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_FIX_CAPACITY ),
+
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV(  0x0421, 0x0063, 0x0001, 0x0601,
+               "Nokia",
+               "Nokia 3109c",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_FIX_CAPACITY ),
+
 /* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0701,
                "Nokia",
                "5310",
                US_SC_DEVICE, US_PR_DEVICE, NULL,
index 8da5e5a..a469a3d 100644 (file)
@@ -5,61 +5,61 @@
  * --dte
  */
 
-#define FLUSH_CACHE_WORKAROUND 1
-
-void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries)
+static void radeon_fixup_offset(struct radeonfb_info *rinfo)
 {
-       int i;
+       u32 local_base;
+
+       /* *** Ugly workaround *** */
+       /*
+        * On some platforms, the video memory is mapped at 0 in radeon chip space
+        * (like PPCs) by the firmware. X will always move it up so that it's seen
+        * by the chip to be at the same address as the PCI BAR.
+        * That means that when switching back from X, there is a mismatch between
+        * the offsets programmed into the engine. This means that potentially,
+        * accel operations done before radeonfb has a chance to re-init the engine
+        * will have incorrect offsets, and potentially trash system memory !
+        *
+        * The correct fix is for fbcon to never call any accel op before the engine
+        * has properly been re-initialized (by a call to set_var), but this is a
+        * complex fix. This workaround in the meantime, called before every accel
+        * operation, makes sure the offsets are in sync.
+        */
 
-       for (i=0; i<2000000; i++) {
-               rinfo->fifo_free = INREG(RBBM_STATUS) & 0x7f;
-               if (rinfo->fifo_free >= entries)
-                       return;
-               udelay(10);
-       }
-       printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
-       /* XXX Todo: attempt to reset the engine */
-}
+       radeon_fifo_wait (1);
+       local_base = INREG(MC_FB_LOCATION) << 16;
+       if (local_base == rinfo->fb_local_base)
+               return;
 
-static inline void radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
-{
-       if (entries <= rinfo->fifo_free)
-               rinfo->fifo_free -= entries;
-       else
-               radeon_fifo_update_and_wait(rinfo, entries);
-}
+       rinfo->fb_local_base = local_base;
 
-static inline void radeonfb_set_creg(struct radeonfb_info *rinfo, u32 reg,
-                                    u32 *cache, u32 new_val)
-{
-       if (new_val == *cache)
-               return;
-       *cache = new_val;
-       radeon_fifo_wait(rinfo, 1);
-       OUTREG(reg, new_val);
+       radeon_fifo_wait (3);
+       OUTREG(DEFAULT_PITCH_OFFSET, (rinfo->pitch << 0x16) |
+                                    (rinfo->fb_local_base >> 10));
+       OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
+       OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
 }
 
 static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo, 
                                   const struct fb_fillrect *region)
 {
-       radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
-                         rinfo->dp_gui_mc_base | GMC_BRUSH_SOLID_COLOR | ROP3_P);
-       radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
-                         DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
-       radeonfb_set_creg(rinfo, DP_BRUSH_FRGD_CLR, &rinfo->dp_brush_fg_cache,
-                         region->color);
-
-       /* Ensure the dst cache is flushed and the engine idle before
-        * issuing the operation.
-        *
-        * This works around engine lockups on some cards
-        */
-#if FLUSH_CACHE_WORKAROUND
-       radeon_fifo_wait(rinfo, 2);
+       radeon_fifo_wait(4);  
+  
+       OUTREG(DP_GUI_MASTER_CNTL,  
+               rinfo->dp_gui_master_cntl  /* contains, like GMC_DST_32BPP */
+                | GMC_BRUSH_SOLID_COLOR
+                | ROP3_P);
+       if (radeon_get_dstbpp(rinfo->depth) != DST_8BPP)
+               OUTREG(DP_BRUSH_FRGD_CLR, rinfo->pseudo_palette[region->color]);
+       else
+               OUTREG(DP_BRUSH_FRGD_CLR, region->color);
+       OUTREG(DP_WRITE_MSK, 0xffffffff);
+       OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM));
+
+       radeon_fifo_wait(2);
        OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
        OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
-       radeon_fifo_wait(rinfo, 2);
+
+       radeon_fifo_wait(2);  
        OUTREG(DST_Y_X, (region->dy << 16) | region->dx);
        OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height);
 }
@@ -70,14 +70,15 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region)
        struct fb_fillrect modded;
        int vxres, vyres;
   
-       WARN_ON(rinfo->gfx_mode);
-       if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+       if (info->state != FBINFO_STATE_RUNNING)
                return;
        if (info->flags & FBINFO_HWACCEL_DISABLED) {
                cfb_fillrect(info, region);
                return;
        }
 
+       radeon_fixup_offset(rinfo);
+
        vxres = info->var.xres_virtual;
        vyres = info->var.yres_virtual;
 
@@ -90,10 +91,6 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region)
        if(modded.dx + modded.width  > vxres) modded.width  = vxres - modded.dx;
        if(modded.dy + modded.height > vyres) modded.height = vyres - modded.dy;
 
-       if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
-           info->fix.visual == FB_VISUAL_DIRECTCOLOR )
-               modded.color = ((u32 *) (info->pseudo_palette))[region->color];
-
        radeonfb_prim_fillrect(rinfo, &modded);
 }
 
@@ -112,22 +109,22 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo,
        if ( xdir < 0 ) { sx += w-1; dx += w-1; }
        if ( ydir < 0 ) { sy += h-1; dy += h-1; }
 
-       radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
-                         rinfo->dp_gui_mc_base |
-                         GMC_BRUSH_NONE |
-                         GMC_SRC_DATATYPE_COLOR |
-                         ROP3_S |
-                         DP_SRC_SOURCE_MEMORY);
-       radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
-                         (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) |
-                         (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
-
-#if FLUSH_CACHE_WORKAROUND
-       radeon_fifo_wait(rinfo, 2);
+       radeon_fifo_wait(3);
+       OUTREG(DP_GUI_MASTER_CNTL,
+               rinfo->dp_gui_master_cntl /* i.e. GMC_DST_32BPP */
+               | GMC_BRUSH_NONE
+               | GMC_SRC_DSTCOLOR
+               | ROP3_S 
+               | DP_SRC_SOURCE_MEMORY );
+       OUTREG(DP_WRITE_MSK, 0xffffffff);
+       OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0)
+                       | (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
+
+       radeon_fifo_wait(2);
        OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
        OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
-       radeon_fifo_wait(rinfo, 3);
+
+       radeon_fifo_wait(3);
        OUTREG(SRC_Y_X, (sy << 16) | sx);
        OUTREG(DST_Y_X, (dy << 16) | dx);
        OUTREG(DST_HEIGHT_WIDTH, (h << 16) | w);
@@ -146,14 +143,15 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
        modded.width  = area->width;
        modded.height = area->height;
   
-       WARN_ON(rinfo->gfx_mode);
-       if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+       if (info->state != FBINFO_STATE_RUNNING)
                return;
        if (info->flags & FBINFO_HWACCEL_DISABLED) {
                cfb_copyarea(info, area);
                return;
        }
 
+       radeon_fixup_offset(rinfo);
+
        vxres = info->var.xres_virtual;
        vyres = info->var.yres_virtual;
 
@@ -170,116 +168,13 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
        radeonfb_prim_copyarea(rinfo, &modded);
 }
 
-static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo,
-                                   const struct fb_image *image,
-                                   u32 fg, u32 bg)
-{
-       unsigned int dwords;
-       u32 *bits;
-
-       radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
-                         rinfo->dp_gui_mc_base |
-                         GMC_BRUSH_NONE | GMC_DST_CLIP_LEAVE |
-                         GMC_SRC_DATATYPE_MONO_FG_BG |
-                         ROP3_S |
-                         GMC_BYTE_ORDER_MSB_TO_LSB |
-                         DP_SRC_SOURCE_HOST_DATA);
-       radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
-                         DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
-       radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg);
-       radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg);
-
-       /* Ensure the dst cache is flushed and the engine idle before
-        * issuing the operation.
-        *
-        * This works around engine lockups on some cards
-        */
-#if FLUSH_CACHE_WORKAROUND
-       radeon_fifo_wait(rinfo, 2);
-       OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
-       OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
-
-       /* X here pads width to a multiple of 32 and uses the clipper to
-        * adjust the result. Is that really necessary ? Things seem to
-        * work ok for me without that and the doco doesn't seem to imply]
-        * there is such a restriction.
-        */
-       radeon_fifo_wait(rinfo, 4);
-       OUTREG(SC_TOP_LEFT, (image->dy << 16) | image->dx);
-       OUTREG(SC_BOTTOM_RIGHT, ((image->dy + image->height) << 16) |
-              (image->dx + image->width));
-       OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
-
-       OUTREG(DST_HEIGHT_WIDTH, (image->height << 16) | ((image->width + 31) & ~31));
-
-       dwords = (image->width + 31) >> 5;
-       dwords *= image->height;
-       bits = (u32*)(image->data);
-
-       while(dwords >= 8) {
-               radeon_fifo_wait(rinfo, 8);
-#if BITS_PER_LONG == 64
-               __raw_writeq(*((u64 *)(bits)), rinfo->mmio_base + HOST_DATA0);
-               __raw_writeq(*((u64 *)(bits+2)), rinfo->mmio_base + HOST_DATA2);
-               __raw_writeq(*((u64 *)(bits+4)), rinfo->mmio_base + HOST_DATA4);
-               __raw_writeq(*((u64 *)(bits+6)), rinfo->mmio_base + HOST_DATA6);
-               bits += 8;
-#else
-               __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
-               __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA1);
-               __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA2);
-               __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA3);
-               __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA4);
-               __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA5);
-               __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA6);
-               __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA7);
-#endif
-               dwords -= 8;
-       }
-       while(dwords--) {
-               radeon_fifo_wait(rinfo, 1);
-               __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
-       }
-}
-
 void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image)
 {
        struct radeonfb_info *rinfo = info->par;
-       u32 fg, bg;
 
-       WARN_ON(rinfo->gfx_mode);
-       if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
-               return;
-
-       if (!image->width || !image->height)
+       if (info->state != FBINFO_STATE_RUNNING)
                return;
-
-       /* We only do 1 bpp color expansion for now */
-       if (!accel_cexp ||
-           (info->flags & FBINFO_HWACCEL_DISABLED) || image->depth != 1)
-               goto fallback;
-
-       /* Fallback if running out of the screen. We may do clipping
-        * in the future */
-       if ((image->dx + image->width) > info->var.xres_virtual ||
-           (image->dy + image->height) > info->var.yres_virtual)
-               goto fallback;
-
-       if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
-           info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
-               fg = ((u32*)(info->pseudo_palette))[image->fg_color];
-               bg = ((u32*)(info->pseudo_palette))[image->bg_color];
-       } else {
-               fg = image->fg_color;
-               bg = image->bg_color;
-       }
-
-       radeonfb_prim_imageblit(rinfo, image, fg, bg);
-       return;
-
- fallback:
-       radeon_engine_idle(rinfo);
+       radeon_engine_idle();
 
        cfb_imageblit(info, image);
 }
@@ -290,8 +185,7 @@ int radeonfb_sync(struct fb_info *info)
 
        if (info->state != FBINFO_STATE_RUNNING)
                return 0;
-
-       radeon_engine_idle(rinfo);
+       radeon_engine_idle();
 
        return 0;
 }
@@ -367,10 +261,9 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
        /* disable 3D engine */
        OUTREG(RB3D_CNTL, 0);
 
-       rinfo->fifo_free = 0;
        radeonfb_engine_reset(rinfo);
 
-       radeon_fifo_wait(rinfo, 1);
+       radeon_fifo_wait (1);
        if (IS_R300_VARIANT(rinfo)) {
                OUTREG(RB2D_DSTCACHE_MODE, INREG(RB2D_DSTCACHE_MODE) |
                       RB2D_DC_AUTOFLUSH_ENABLE |
@@ -384,7 +277,7 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
                OUTREG(RB2D_DSTCACHE_MODE, 0);
        }
 
-       radeon_fifo_wait(rinfo, 3);
+       radeon_fifo_wait (3);
        /* We re-read MC_FB_LOCATION from card as it can have been
         * modified by XFree drivers (ouch !)
         */
@@ -395,57 +288,41 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
        OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
        OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
 
-       radeon_fifo_wait(rinfo, 1);
-#ifdef __BIG_ENDIAN
+       radeon_fifo_wait (1);
+#if defined(__BIG_ENDIAN)
        OUTREGP(DP_DATATYPE, HOST_BIG_ENDIAN_EN, ~HOST_BIG_ENDIAN_EN);
 #else
        OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN);
 #endif
-       radeon_fifo_wait(rinfo, 2);
+       radeon_fifo_wait (2);
        OUTREG(DEFAULT_SC_TOP_LEFT, 0);
        OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX |
                                         DEFAULT_SC_BOTTOM_MAX));
 
-       /* set default DP_GUI_MASTER_CNTL */
        temp = radeon_get_dstbpp(rinfo->depth);
-       rinfo->dp_gui_mc_base = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
+       rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
 
-       rinfo->dp_gui_mc_cache = rinfo->dp_gui_mc_base |
-               GMC_BRUSH_SOLID_COLOR |
-               GMC_SRC_DATATYPE_COLOR;
-       radeon_fifo_wait(rinfo, 1);
-       OUTREG(DP_GUI_MASTER_CNTL, rinfo->dp_gui_mc_cache);
+       radeon_fifo_wait (1);
+       OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl |
+                                   GMC_BRUSH_SOLID_COLOR |
+                                   GMC_SRC_DATATYPE_COLOR));
 
+       radeon_fifo_wait (7);
 
        /* clear line drawing regs */
-       radeon_fifo_wait(rinfo, 2);
        OUTREG(DST_LINE_START, 0);
        OUTREG(DST_LINE_END, 0);
 
-       /* set brush and source color regs */
-       rinfo->dp_brush_fg_cache = 0xffffffff;
-       rinfo->dp_brush_bg_cache = 0x00000000;
-       rinfo->dp_src_fg_cache = 0xffffffff;
-       rinfo->dp_src_bg_cache = 0x00000000;
-       radeon_fifo_wait(rinfo, 4);
-       OUTREG(DP_BRUSH_FRGD_CLR, rinfo->dp_brush_fg_cache);
-       OUTREG(DP_BRUSH_BKGD_CLR, rinfo->dp_brush_bg_cache);
-       OUTREG(DP_SRC_FRGD_CLR, rinfo->dp_src_fg_cache);
-       OUTREG(DP_SRC_BKGD_CLR, rinfo->dp_src_bg_cache);
-
-       /* Default direction */
-       rinfo->dp_cntl_cache = DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM;
-       radeon_fifo_wait(rinfo, 1);
-       OUTREG(DP_CNTL, rinfo->dp_cntl_cache);
+       /* set brush color regs */
+