issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
<para>
- Called by ata_device_add() after ata_dev_identify() determines
- a device is present.
- </para>
- <para>
This entry may be specified as NULL in ata_port_operations.
</para>
<sect2><title>Taskfile read/write</title>
<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
hardware registers / DMA buffers, to obtain the current set of
taskfile register values.
Most drivers for taskfile-based hardware (PIO or MMIO) use
- ata_tf_load() and ata_tf_read() for these hooks.
+ ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
</para>
</sect2>
<sect2><title>PIO data read/write</title>
<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
</programlisting>
<para>
All bmdma-style drivers must implement this hook. This is the low-level
operation that actually copies the data bytes during a PIO data
transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
</para>
</sect2>
<sect2><title>ATA command execute</title>
<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
causes an ATA command, previously loaded with
->tf_load(), to be initiated in hardware.
- Most drivers for taskfile-based hardware use ata_exec_command()
+ Most drivers for taskfile-based hardware use ata_sff_exec_command()
for this hook.
</para>
<sect2><title>Read specific ATA shadow registers</title>
<programlisting>
-u8 (*check_status)(struct ata_port *ap);
-u8 (*check_altstatus)(struct ata_port *ap);
+u8 (*sff_check_status)(struct ata_port *ap);
+u8 (*sff_check_altstatus)(struct ata_port *ap);
</programlisting>
<para>
hardware. On some hardware, reading the Status register has
the side effect of clearing the interrupt condition.
Most drivers for taskfile-based hardware use
- ata_check_status() for this hook.
- </para>
- <para>
- Note that because this is called from ata_device_add(), at
- least a dummy function that clears device interrupts must be
- provided for all drivers, even if the controller doesn't
- actually have a taskfile status register.
+ ata_sff_check_status() for this hook.
</para>
</sect2>
<sect2><title>Select ATA device on bus</title>
<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>
<para>
</para>
<para>
Most drivers for taskfile-based hardware use
- ata_std_dev_select() for this hook. Controllers which do not
- support second drives on a port (such as SATA contollers) will
- use ata_noop_dev_select().
+ ata_sff_dev_select() for this hook.
</para>
</sect2>
to struct ata_host_set.
</para>
<para>
- Most legacy IDE drivers use ata_interrupt() for the
+ Most legacy IDE drivers use ata_sff_interrupt() for the
irq_handler hook, which scans all ports in the host_set,
determines which queued command was active (if any), and calls
- ata_host_intr(ap,qc).
+ ata_sff_host_intr(ap,qc).
</para>
<para>
- Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+ Most legacy IDE drivers use ata_sff_irq_clear() for the
irq_clear() hook, which simply clears the interrupt and error
flags in the DMA status register.
</para>
data from port at this time.
</para>
<para>
- Many drivers use ata_port_stop() as this hook, which frees the
- PRD table.
- </para>
- <para>
->host_stop() is called after all ->port_stop() calls
have completed. The hook must finalize hardware shutdown, release DMA
and other resources, etc.
The CONFIG_RCU_CPU_STALL_DETECTOR kernel config parameter enables
RCU's CPU stall detector, which detects conditions that unduly delay
RCU grace periods. The stall detector's idea of what constitutes
-"unduly delayed" is controlled by a pair of C preprocessor macros:
+"unduly delayed" is controlled by a set of C preprocessor macros:
RCU_SECONDS_TILL_STALL_CHECK
This macro defines the period of time that RCU will wait from
the beginning of a grace period until it issues an RCU CPU
- stall warning. It is normally ten seconds.
+ stall warning. This time period is normally ten seconds.
RCU_SECONDS_TILL_STALL_RECHECK
This macro defines the period of time that RCU will wait after
- issuing a stall warning until it issues another stall warning.
- It is normally set to thirty seconds.
+ issuing a stall warning until it issues another stall warning
+ for the same stall. This time period is normally set to thirty
+ seconds.
RCU_STALL_RAT_DELAY
- The CPU stall detector tries to make the offending CPU rat on itself,
- as this often gives better-quality stack traces. However, if
- the offending CPU does not detect its own stall in the number
- of jiffies specified by RCU_STALL_RAT_DELAY, then other CPUs will
- complain. This is normally set to two jiffies.
+ The CPU stall detector tries to make the offending CPU print its
+ own warnings, as this often gives better-quality stack traces.
+ However, if the offending CPU does not detect its own stall in
+ the number of jiffies specified by RCU_STALL_RAT_DELAY, then
+ some other CPU will complain. This delay is normally set to
+ two jiffies.
-The following problems can result in an RCU CPU stall warning:
+When a CPU detects that it is stalling, it will print a message similar
+to the following:
+
+INFO: rcu_sched_state detected stall on CPU 5 (t=2500 jiffies)
+
+This message indicates that CPU 5 detected that it was causing a stall,
+and that the stall was affecting RCU-sched. This message will normally be
+followed by a stack dump of the offending CPU. On TREE_RCU kernel builds,
+RCU and RCU-sched are implemented by the same underlying mechanism,
+while on TREE_PREEMPT_RCU kernel builds, RCU is instead implemented
+by rcu_preempt_state.
+
+On the other hand, if the offending CPU fails to print out a stall-warning
+message quickly enough, some other CPU will print a message similar to
+the following:
+
+INFO: rcu_bh_state detected stalls on CPUs/tasks: { 3 5 } (detected by 2, 2502 jiffies)
+
+This message indicates that CPU 2 detected that CPUs 3 and 5 were both
+causing stalls, and that the stall was affecting RCU-bh. This message
+will normally be followed by stack dumps for each CPU. Please note that
+TREE_PREEMPT_RCU builds can be stalled by tasks as well as by CPUs,
+and that the tasks will be indicated by PID, for example, "P3421".
+It is even possible for a rcu_preempt_state stall to be caused by both
+CPUs -and- tasks, in which case the offending CPUs and tasks will all
+be called out in the list.
+
+Finally, if the grace period ends just as the stall warning starts
+printing, there will be a spurious stall-warning message:
+
+INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffies)
+
+This is rare, but does happen from time to time in real life.
+
+So your kernel printed an RCU CPU stall warning. The next question is
+"What caused it?" The following problems can result in RCU CPU stall
+warnings:
o A CPU looping in an RCU read-side critical section.
-o A CPU looping with interrupts disabled.
+o A CPU looping with interrupts disabled. This condition can
+ result in RCU-sched and RCU-bh stalls.
-o A CPU looping with preemption disabled.
+o A CPU looping with preemption disabled. This condition can
+ result in RCU-sched stalls and, if ksoftirqd is in use, RCU-bh
+ stalls.
+
+o A CPU looping with bottom halves disabled. This condition can
+ result in RCU-sched and RCU-bh stalls.
o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
without invoking schedule().
o A bug in the RCU implementation.
o A hardware failure. This is quite unlikely, but has occurred
- at least once in a former life. A CPU failed in a running system,
+ at least once in real life. A CPU failed in a running system,
becoming unresponsive, but not causing an immediate crash.
This resulted in a series of RCU CPU stall warnings, eventually
leading the realization that the CPU had failed.
-The RCU, RCU-sched, and RCU-bh implementations have CPU stall warning.
-SRCU does not do so directly, but its calls to synchronize_sched() will
-result in RCU-sched detecting any CPU stalls that might be occurring.
-
-To diagnose the cause of the stall, inspect the stack traces. The offending
-function will usually be near the top of the stack. If you have a series
-of stall warnings from a single extended stall, comparing the stack traces
-can often help determine where the stall is occurring, which will usually
-be in the function nearest the top of the stack that stays the same from
-trace to trace.
+The RCU, RCU-sched, and RCU-bh implementations have CPU stall
+warning. SRCU does not have its own CPU stall warnings, but its
+calls to synchronize_sched() will result in RCU-sched detecting
+RCU-sched-related CPU stalls. Please note that RCU only detects
+CPU stalls when there is a grace period in progress. No grace period,
+no CPU stall warnings.
+
+To diagnose the cause of the stall, inspect the stack traces.
+The offending function will usually be near the top of the stack.
+If you have a series of stall warnings from a single extended stall,
+comparing the stack traces can often help determine where the stall
+is occurring, which will usually be in the function nearest the top of
+that portion of the stack which remains the same from trace to trace.
+If you can reliably trigger the stall, ftrace can be quite helpful.
RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE.
sched_expedited-torture: Reader Pipe: 12660320201 95875 0 0 0 0 0 0 0 0 0
sched_expedited-torture: Reader Batch: 12660424885 0 0 0 0 0 0 0 0 0 0
sched_expedited-torture: Free-Block Circulation: 1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0
- state: -1 / 0:0 3:0 4:0
-
-As before, the first four lines are similar to those for RCU.
-The last line shows the task-migration state. The first number is
--1 if synchronize_sched_expedited() is idle, -2 if in the process of
-posting wakeups to the migration kthreads, and N when waiting on CPU N.
-Each of the colon-separated fields following the "/" is a CPU:state pair.
-Valid states are "0" for idle, "1" for waiting for quiescent state,
-"2" for passed through quiescent state, and "3" when a race with a
-CPU-hotplug event forces use of the synchronize_sched() primitive.
USAGE
The output of "cat rcu/rcu_pending" looks as follows:
rcu_sched:
- 0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
- 1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
- 2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
- 3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
- 4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
- 5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
- 6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
- 7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
+ 0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
+ 1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
+ 2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
+ 3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
+ 4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
+ 5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
+ 6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
+ 7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
rcu_bh:
- 0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
- 1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
- 2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
- 3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
- 4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
- 5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
- 6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
- 7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
+ 0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
+ 1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
+ 2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
+ 3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
+ 4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
+ 5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
+ 6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
+ 7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
As always, this is once again split into "rcu_sched" and "rcu_bh"
portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
o "qsp" is the number of times that the RCU was waiting for a
quiescent state from this CPU.
+o "rpq" is the number of times that the CPU had passed through
+ a quiescent state, but not yet reported it to RCU.
+
o "cbr" is the number of times that this CPU had RCU callbacks
that had passed through a grace period, and were thus ready
to be invoked.
Generally invoked by accident today.
Seen as doing more harm than good.
Who: Len Brown <len.brown@intel.com>
+
+----------------------------
+
+What: video4linux /dev/vtx teletext API support
+When: 2.6.35
+Files: drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
+ include/linux/videotext.h
+Why: The vtx device nodes have been superseded by vbi device nodes
+ for many years. No applications exist that use the vtx support.
+ Of the two i2c drivers that actually support this API the saa5249
+ has been impossible to use for a year now and no known hardware
+ that supports this device exists. The saa5246a is theoretically
+ supported by the old mxb boards, but it never actually worked.
+
+ In summary: there is no hardware that can use this API and there
+ are no applications actually implementing this API.
+
+ The vtx support still reserves minors 192-223 and we would really
+ like to reuse those for upcoming new functionality. In the unlikely
+ event that new hardware appears that wants to use the functionality
+ provided by the vtx API, then that functionality should be build
+ around the sliced VBI API instead.
+Who: Hans Verkuil <hverkuil@xs4all.nl>
08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0 [threadstack:001ff4b4]
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0
a7eb2000-a7eb3000 ---p 00000000 00:00 0
a7eb3000-a7ed5000 rw-p 00000000 00:00 0
a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
[stack] = the stack of the main process
[vdso] = the "virtual dynamic shared object",
the kernel system call handler
- [threadstack:xxxxxxxx] = the stack of the thread, xxxxxxxx is the stack size
or if empty, the mapping is anonymous.
/* retrieve the value */
void *i2c_get_clientdata(const struct i2c_client *client);
+Note that starting with kernel 2.6.34, you don't have to set the `data' field
+to NULL in remove() or if probe() failed anymore. The i2c-core does this
+automatically on these occasions. Those are also the only times the core will
+touch this field.
+
Accessing the client
====================
byte 1:
bit 7 6 5 4 3 2 1 0
- x15 x14 x13 x12 x11 x10 x9 x8
+ . . . . . x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x4 x2 x1 x0
- x15..x0 = absolute x value (horizontal)
+ x10..x0 = absolute x value (horizontal)
byte 3:
byte 4:
bit 7 6 5 4 3 2 1 0
- y15 y14 y13 y12 y11 y10 y8 y8
+ . . . . . . y9 y8
byte 5:
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
- y15..y0 = absolute y value (vertical)
+ y9..y0 = absolute y value (vertical)
4.2.2 Two finger touch
has been restored, it will restore the TPM PCRs and then
transfer control back to the kernel's S3 resume vector.
In order to preserve system integrity across S3, the kernel
- provides tboot with a set of memory ranges (kernel
- code/data/bss, S3 resume code, and AP trampoline) that tboot
- will calculate a MAC (message authentication code) over and then
- seal with the TPM. On resume and once the measured environment
- has been re-established, tboot will re-calculate the MAC and
- verify it against the sealed value. Tboot's policy determines
- what happens if the verification fails.
+ provides tboot with a set of memory ranges (RAM and RESERVED_KERN
+ in the e820 table, but not any memory that BIOS might alter over
+ the S3 transition) that tboot will calculate a MAC (message
+ authentication code) over and then seal with the TPM. On resume
+ and once the measured environment has been re-established, tboot
+ will re-calculate the MAC and verify it against the sealed value.
+ Tboot's policy determines what happens if the verification fails.
+ Note that the c/s 194 of tboot which has the new MAC code supports
+ this.
That's pretty much it for TXT support.
they are unmapped. Otherwise they are
flushed before they will be reused, which
is a lot of faster
+ off - do not initialize any AMD IOMMU found in
+ the system
amijoy.map= [HW,JOY] Amiga joystick support
Map of devices attached to JOY0DAT and JOY1DAT
as early as possible in order to facilitate early
boot debugging.
- ftrace_dump_on_oops
+ ftrace_dump_on_oops[=orig_cpu]
[FTRACE] will dump the trace buffers on oops.
+ If no parameter is passed, ftrace will dump
+ buffers of all CPUs, but if you pass orig_cpu, it will
+ dump only the buffer of the CPU that triggered the
+ oops.
ftrace_filter=[function-list]
[FTRACE] Limit the functions traced by the function
1.4 How Does Jump Optimization Work?
-If you configured your kernel with CONFIG_OPTPROBES=y (currently
-this option is supported on x86/x86-64, non-preemptive kernel) and
+If your kernel is built with CONFIG_OPTPROBES=y (currently this flag
+is automatically set 'y' on x86/x86-64, non-preemptive kernel) and
the "debug.kprobes_optimization" kernel parameter is set to 1 (see
sysctl(8)), Kprobes tries to reduce probe-hit overhead by using a jump
instruction instead of a breakpoint instruction at each probepoint.
using one of the following techniques:
- Specify an empty function for the kprobe's post_handler or break_handler.
or
-- Config CONFIG_OPTPROBES=n.
- or
- Execute 'sysctl -w debug.kprobes_optimization=n'
2. Architectures Supported
so you can use "objdump -d -l vmlinux" to see the source-to-object
code mapping.
-If you want to reduce probing overhead, set "Kprobes jump optimization
-support" (CONFIG_OPTPROBES) to "y". You can find this option under the
-"Kprobes" line.
-
4. API Reference
The Kprobes API includes a "register" function and an "unregister"
for (node = rb_first(&mytree); node; node = rb_next(node))
printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
+Support for Augmented rbtrees
+-----------------------------
+
+Augmented rbtree is an rbtree with "some" additional data stored in each node.
+This data can be used to augment some new functionality to rbtree.
+Augmented rbtree is an optional feature built on top of basic rbtree
+infrastructure. rbtree user who wants this feature will have an augment
+callback function in rb_root initialized.
+
+This callback function will be called from rbtree core routines whenever
+a node has a change in one or both of its children. It is the responsibility
+of the callback function to recalculate the additional data that is in the
+rb node using new children information. Note that if this new additional
+data affects the parent node's additional data, then callback function has
+to handle it and do the recursive updates.
+
+
+Interval tree is an example of augmented rb tree. Reference -
+"Introduction to Algorithms" by Cormen, Leiserson, Rivest and Stein.
+More details about interval trees:
+
+Classical rbtree has a single key and it cannot be directly used to store
+interval ranges like [lo:hi] and do a quick lookup for any overlap with a new
+lo:hi or to find whether there is an exact match for a new lo:hi.
+
+However, rbtree can be augmented to store such interval ranges in a structured
+way making it possible to do efficient lookup and exact match.
+
+This "extra information" stored in each node is the maximum hi
+(max_hi) value among all the nodes that are its descendents. This
+information can be maintained at each node just be looking at the node
+and its immediate children. And this will be used in O(log n) lookup
+for lowest match (lowest start address among all possible matches)
+with something like:
+
+find_lowest_match(lo, hi, node)
+{
+ lowest_match = NULL;
+ while (node) {
+ if (max_hi(node->left) > lo) {
+ // Lowest overlap if any must be on left side
+ node = node->left;
+ } else if (overlap(lo, hi, node)) {
+ lowest_match = node;
+ break;
+ } else if (lo > node->lo) {
+ // Lowest overlap if any must be on right side
+ node = node->right;
+ } else {
+ break;
+ }
+ }
+ return lowest_match;
+}
+
+Finding exact match will be to first find lowest match and then to follow
+successor nodes looking for exact match, until the start of a node is beyond
+the hi value we are looking for.
desirable to first provide fair CPU time to each user on the system and then to
each task belonging to a user.
-CONFIG_GROUP_SCHED strives to achieve exactly that. It lets tasks to be
+CONFIG_CGROUP_SCHED strives to achieve exactly that. It lets tasks to be
grouped and divides CPU time fairly among such groups.
CONFIG_RT_GROUP_SCHED permits to group real-time (i.e., SCHED_FIFO and
CONFIG_FAIR_GROUP_SCHED permits to group CFS (i.e., SCHED_NORMAL and
SCHED_BATCH) tasks.
-At present, there are two (mutually exclusive) mechanisms to group tasks for
-CPU bandwidth control purposes:
-
- - Based on user id (CONFIG_USER_SCHED)
-
- With this option, tasks are grouped according to their user id.
-
- - Based on "cgroup" pseudo filesystem (CONFIG_CGROUP_SCHED)
-
- This options needs CONFIG_CGROUPS to be defined, and lets the administrator
+ These options need CONFIG_CGROUPS to be defined, and let the administrator
create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See
Documentation/cgroups/cgroups.txt for more information about this filesystem.
-Only one of these options to group tasks can be chosen and not both.
-
-When CONFIG_USER_SCHED is defined, a directory is created in sysfs for each new
-user and a "cpu_share" file is added in that directory.
-
- # cd /sys/kernel/uids
- # cat 512/cpu_share # Display user 512's CPU share
- 1024
- # echo 2048 > 512/cpu_share # Modify user 512's CPU share
- # cat 512/cpu_share # Display user 512's CPU share
- 2048
- #
-
-CPU bandwidth between two users is divided in the ratio of their CPU shares.
-For example: if you would like user "root" to get twice the bandwidth of user
-"guest," then set the cpu_share for both the users such that "root"'s cpu_share
-is twice "guest"'s cpu_share.
-
-When CONFIG_CGROUP_SCHED is defined, a "cpu.shares" file is created for each
+When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each
group created using the pseudo filesystem. See example steps below to create
task groups and modify their CPU share using the "cgroups" pseudo filesystem.
# #Launch gmplayer (or your favourite movie player)
# echo <movie_player_pid> > multimedia/tasks
-
-8. Implementation note: user namespaces
-
-User namespaces are intended to be hierarchical. But they are currently
-only partially implemented. Each of those has ramifications for CFS.
-
-First, since user namespaces are hierarchical, the /sys/kernel/uids
-presentation is inadequate. Eventually we will likely want to use sysfs
-tagging to provide private views of /sys/kernel/uids within each user
-namespace.
-
-Second, the hierarchical nature is intended to support completely
-unprivileged use of user namespaces. So if using user groups, then
-we want the users in a user namespace to be children of the user
-who created it.
-
-That is currently unimplemented. So instead, every user in a new
-user namespace will receive 1024 shares just like any user in the
-initial user namespace. Note that at the moment creation of a new
-user namespace requires each of CAP_SYS_ADMIN, CAP_SETUID, and
-CAP_SETGID.
2.3 Basis for grouping tasks
----------------------------
-There are two compile-time settings for allocating CPU bandwidth. These are
-configured using the "Basis for grouping tasks" multiple choice menu under
-General setup > Group CPU Scheduler:
-
-a. CONFIG_USER_SCHED (aka "Basis for grouping tasks" = "user id")
-
-This lets you use the virtual files under
-"/sys/kernel/uids/<uid>/cpu_rt_runtime_us" to control he CPU time reserved for
-each user .
-
-The other option is:
-
-.o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
+Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real
+CPU bandwidth to task groups.
This uses the /cgroup virtual file system and
"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
-control group instead.
+control group.
For more information on working with control groups, you should read
Documentation/cgroups/cgroups.txt as well.
===============
There is work in progress to make the scheduling period for each group
-("/sys/kernel/uids/<uid>/cpu_rt_period_us" or
-"/cgroup/<cgroup>/cpu.rt_period_us" respectively) configurable as well.
+("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well.
The constraint on the period is that a subgroup must have a smaller or
equal period to its parent. But realistically its not very useful _yet_
};
ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
- if (ret == 1)
+ if (ret < 1)
pabort("can't send spi message");
for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
trace_event=[event-list]
-The format of this boot option is the same as described in section 2.1.
+event-list is a comma separated list of events. See section 2.1 for event
+format.
3. Defining an event-enabled tracepoint
=======================================
to be traced. Echoing names of functions into this file
will limit the trace to only those functions.
+ This interface also allows for commands to be used. See the
+ "Filter commands" section for more details.
+
set_ftrace_notrace:
This has an effect opposite to that of
can either use the sysctl function or set it via the proc system
interface.
- sysctl kernel.ftrace_dump_on_oops=1
+ sysctl kernel.ftrace_dump_on_oops=n
or
- echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
+ echo n > /proc/sys/kernel/ftrace_dump_on_oops
+If n = 1, ftrace will dump buffers of all CPUs, if n = 2 ftrace will
+only dump the buffer of the CPU that triggered the oops.
Here's an example of such a dump after a null pointer
dereference in a kernel module:
echo > set_graph_function
+Filter commands
+---------------
+
+A few commands are supported by the set_ftrace_filter interface.
+Trace commands have the following format:
+
+<function>:<command>:<parameter>
+
+The following commands are supported:
+
+- mod
+ This command enables function filtering per module. The
+ parameter defines the module. For example, if only the write*
+ functions in the ext3 module are desired, run:
+
+ echo 'write*:mod:ext3' > set_ftrace_filter
+
+ This command interacts with the filter in the same way as
+ filtering based on function names. Thus, adding more functions
+ in a different module is accomplished by appending (>>) to the
+ filter file. Remove specific module functions by prepending
+ '!':
+
+ echo '!writeback*:mod:ext3' >> set_ftrace_filter
+
+- traceon/traceoff
+ These commands turn tracing on and off when the specified
+ functions are hit. The parameter determines how many times the
+ tracing system is turned on and off. If unspecified, there is
+ no limit. For example, to disable tracing when a schedule bug
+ is hit the first 5 times, run:
+
+ echo '__schedule_bug:traceoff:5' > set_ftrace_filter
+
+ These commands are cumulative whether or not they are appended
+ to set_ftrace_filter. To remove a command, prepend it by '!'
+ and drop the parameter:
+
+ echo '!__schedule_bug:traceoff' > set_ftrace_filter
+
+
trace_pipe
----------
$stack : Fetch stack address.
$retval : Fetch return value.(*)
+|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
- NAME=FETCHARG: Set NAME as the argument name of FETCHARG.
+ NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
+ FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
+ (u8/u16/u32/u64/s8/s16/s32/s64) are supported.
(*) only for return probe.
(**) this is useful for fetching a field of data structures.
F: Documentation/networking/README.ipw2200
F: drivers/net/wireless/ipw2x00/ipw2200.*
+INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
+M: Joseph Cihula <joseph.cihula@intel.com>
+M: Shane Wang <shane.wang@intel.com>
+L: tboot-devel@lists.sourceforge.net
+W: http://tboot.sourceforge.net
+T: Mercurial http://www.bughost.org/repos.hg/tboot.hg
+S: Supported
+F: Documentation/intel_txt.txt
+F: include/linux/tboot.h
+F: arch/x86/kernel/tboot.c
+
INTEL WIRELESS WIMAX CONNECTION 2400
M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
M: linux-wimax@intel.com
M: Robert Richter <robert.richter@amd.com>
L: oprofile-list@lists.sf.net
S: Maintained
+F: arch/*/include/asm/oprofile*.h
F: arch/*/oprofile/
F: drivers/oprofile/
F: include/linux/oprofile.h
M: Ingo Molnar <mingo@elte.hu>
M: Arnaldo Carvalho de Melo <acme@redhat.com>
S: Supported
-F: kernel/perf_event.c
+F: kernel/perf_event*.c
F: include/linux/perf_event.h
-F: arch/*/kernel/perf_event.c
-F: arch/*/kernel/*/perf_event.c
-F: arch/*/kernel/*/*/perf_event.c
+F: arch/*/kernel/perf_event*.c
+F: arch/*/kernel/*/perf_event*.c
+F: arch/*/kernel/*/*/perf_event*.c
F: arch/*/include/asm/perf_event.h
-F: arch/*/lib/perf_event.c
+F: arch/*/lib/perf_event*.c
F: arch/*/kernel/perf_callchain.c
F: tools/perf/
F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
-M: Geoff Levand <geoffrey.levand@am.sony.com>
+M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
L: cbe-oss-dev@ozlabs.org
-S: Supported
+S: Maintained
F: drivers/net/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
-M: Geoff Levand <geoffrey.levand@am.sony.com>
+M: Geoff Levand <geoff@infradead.org>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
-S: Supported
+S: Maintained
F: arch/powerpc/boot/ps3*
F: arch/powerpc/include/asm/lv1call.h
F: arch/powerpc/include/asm/ps3*.h
F: drivers/mmc/host/tmio_mmc.*
TMPFS (SHMEM FILESYSTEM)
-M: Hugh Dickins <hugh.dickins@tiscali.co.uk>
+M: Hugh Dickins <hughd@google.com>
L: linux-mm@kvack.org
S: Maintained
F: include/linux/shmem_fs.h
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 34
-EXTRAVERSION = -rc5
+EXTRAVERSION =
NAME = Sheep on Meth
# *DOCUMENTATION*
If in doubt, say "N".
config OPTPROBES
- bool "Kprobes jump optimization support (EXPERIMENTAL)"
- default y
- depends on KPROBES
+ def_bool y
+ depends on KPROBES && HAVE_OPTPROBES
depends on !PREEMPT
- depends on HAVE_OPTPROBES
select KALLSYMS_ALL
- help
- This option will allow kprobes to optimize breakpoint to
- a jump for reducing its overhead.
config HAVE_EFFICIENT_UNALIGNED_ACCESS
bool
bool
depends on PERF_EVENTS
+config HAVE_MIXED_BREAKPOINTS_REGS
+ bool
+ depends on HAVE_HW_BREAKPOINT
+ help
+ Depending on the arch implementation of hardware breakpoints,
+ some of them have separate registers for data and instruction
+ breakpoints addresses, others have mixed registers to store
+ them but define the access type in a control register.
+ Select this option if your arch implements breakpoints under the
+ latter fashion.
+
config HAVE_USER_RETURN_NOTIFIER
bool
#define ATOMIC_INIT(i) ( (atomic_t) { (i) } )
#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } )
-#define atomic_read(v) ((v)->counter + 0)
-#define atomic64_read(v) ((v)->counter + 0)
+#define atomic_read(v) (*(volatile int *)&(v)->counter)
+#define atomic64_read(v) (*(volatile long *)&(v)->counter)
#define atomic_set(v,i) ((v)->counter = (i))
#define atomic64_set(v,i) ((v)->counter = (i))
#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
/* Whee. EV67 can calculate it directly. */
-static inline unsigned long hweight64(unsigned long w)
+static inline unsigned long __arch_hweight64(unsigned long w)
{
return __kernel_ctpop(w);
}
-static inline unsigned int hweight32(unsigned int w)
+static inline unsigned int __arch_weight32(unsigned int w)
{
- return hweight64(w);
+ return __arch_hweight64(w);
}
-static inline unsigned int hweight16(unsigned int w)
+static inline unsigned int __arch_hweight16(unsigned int w)
{
- return hweight64(w & 0xffff);
+ return __arch_hweight64(w & 0xffff);
}
-static inline unsigned int hweight8(unsigned int w)
+static inline unsigned int __arch_hweight8(unsigned int w)
{
- return hweight64(w & 0xff);
+ return __arch_hweight64(w & 0xff);
}
#else
-#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/arch_hweight.h>
#endif
+#include <asm-generic/bitops/const_hweight.h>
+
#endif /* __KERNEL__ */
#include <asm-generic/bitops/find.h>
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select GPIO_PL061 if GPIOLIB
help
This enables support for ARM Ltd RealView boards.
W(b) __armv4_mmu_cache_off
W(b) __armv4_mmu_cache_flush
- .word 0x56056930
- .word 0xff0ffff0 @ PXA935
+ .word 0x56056900
+ .word 0xffffff00 @ PXA9xx
W(b) __armv4_mmu_cache_on
W(b) __armv4_mmu_cache_off
W(b) __armv4_mmu_cache_flush
W(b) __armv4_mmu_cache_off
W(b) __armv5tej_mmu_cache_flush
- .word 0x56056930
- .word 0xff0ffff0 @ PXA935
- W(b) __armv4_mmu_cache_on
- W(b) __armv4_mmu_cache_off
- W(b) __armv4_mmu_cache_flush
-
.word 0x56050000 @ Feroceon
.word 0xff0f0000
W(b) __armv4_mmu_cache_on
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Fri Jul 17 12:07:28 2009
+# Linux kernel version: 2.6.34-rc2
+# Mon Mar 29 12:01:41 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_PERF_COUNTERS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_FPGA11107 is not set
CONFIG_ARCH_BCM11107=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
CONFIG_UACCESS_WITH_MEMCPY=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc8
-# Sat Feb 13 21:48:53 2010
+# Linux kernel version: 2.6.34-rc2
+# Thu Apr 8 14:49:08 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
#
# Intel PXA2xx/PXA3xx Implementations
# CONFIG_MACH_EM_X270 is not set
# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_CAPC7117 is not set
# CONFIG_ARCH_GUMSTIX is not set
CONFIG_MACH_INTELMOTE2=y
# CONFIG_MACH_STARGATE2 is not set
# CONFIG_PXA_EZX is not set
# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_RAUMFELD_RC is not set
+# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
+# CONFIG_MACH_RAUMFELD_SPEAKER is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_ICONTROL is not set
# CONFIG_ARCH_PXA_ESERIES is not set
CONFIG_PXA27x=y
CONFIG_PXA_SSP=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_CPU_HAS_PMU=y
CONFIG_COMMON_CLKDEV=y
#
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
#
# CPU Power Management
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_BT_ATH3K is not set
+# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TC6393XB is not set
CONFIG_PMIC_DA903X=y
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
CONFIG_VIDEO_PXA27x=y
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
#
# Special HID drivers
#
-CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
#
CONFIG_MMC_PXA=y
# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PXA=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
#define USER(x...) \
9999: x; \
- .section __ex_table,"a"; \
+ .pushsection __ex_table,"a"; \
.align 3; \
.long 9999b,9001f; \
- .previous
+ .popsection
/*
* SMP data memory barrier
.error "Unsupported inc macro argument"
.endif
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
- .previous
+ .popsection
.endm
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
.error "Unsupported inc macro argument"
.endif
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
- .previous
+ .popsection
.endr
.endm
* strex/ldrex monitor on some implementations. The reason we can use it for
* atomic_set() is the clrex or dummy strex done on every exception return.
*/
-#define atomic_read(v) ((v)->counter)
+#define atomic_read(v) (*(volatile int *)&(v)->counter)
#define atomic_set(v,i) (((v)->counter) = (i))
#if __LINUX_ARM_ARCH__ >= 6
#ifdef CONFIG_ARM_ERRATA_411920
extern void v6_icache_inval_all(void);
v6_icache_inval_all();
+#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7
+ asm("mcr p15, 0, %0, c7, c1, 0 @ invalidate I-cache inner shareable\n"
+ :
+ : "r" (0));
#else
asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n"
:
#include <asm/ptrace.h>
#include <asm/user.h>
+struct task_struct;
+
typedef unsigned long elf_greg_t;
typedef unsigned long elf_freg_t[3];
"2: strt %0, [%2]\n" \
" mov %0, #0\n" \
"3:\n" \
- " .section __ex_table,\"a\"\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4f, 2b, 4f\n" \
- " .previous\n" \
- " .section .fixup,\"ax\"\n" \
+ " .popsection\n" \
+ " .pushsection .fixup,\"ax\"\n" \
"4: mov %0, %4\n" \
" b 3b\n" \
- " .previous" \
+ " .popsection" \
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
" it eq @ explicit IT needed for the 2b label\n"
"2: streqt %2, [%3]\n"
"3:\n"
- " .section __ex_table,\"a\"\n"
+ " .pushsection __ex_table,\"a\"\n"
" .align 3\n"
" .long 1b, 4f, 2b, 4f\n"
- " .previous\n"
- " .section .fixup,\"ax\"\n"
+ " .popsection\n"
+ " .pushsection .fixup,\"ax\"\n"
"4: mov %0, %4\n"
" b 3b\n"
- " .previous"
+ " .popsection"
: "=&r" (val)
: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
: "cc", "memory");
#ifndef __ASMARM_SMP_TWD_H
#define __ASMARM_SMP_TWD_H
+#define TWD_TIMER_LOAD 0x00
+#define TWD_TIMER_COUNTER 0x04
+#define TWD_TIMER_CONTROL 0x08
+#define TWD_TIMER_INTSTAT 0x0C
+
+#define TWD_WDOG_LOAD 0x20
+#define TWD_WDOG_COUNTER 0x24
+#define TWD_WDOG_CONTROL 0x28
+#define TWD_WDOG_INTSTAT 0x2C
+#define TWD_WDOG_RESETSTAT 0x30
+#define TWD_WDOG_DISABLE 0x34
+
+#define TWD_TIMER_CONTROL_ENABLE (1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT (0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
+
struct clock_event_device;
extern void __iomem *twd_base;
#define TLB_V7_UIS_FULL (1 << 20)
#define TLB_V7_UIS_ASID (1 << 21)
+/* Inner Shareable BTB operation (ARMv7 MP extensions) */
+#define TLB_V7_IS_BTB (1 << 22)
+
#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */
#define TLB_DCLEAN (1 << 30)
#define TLB_WB (1 << 31)
#endif
#ifdef CONFIG_SMP
-#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
#else
#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
dsb();
isb();
}
+ if (tlb_flag(TLB_V7_IS_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
}
static inline void local_flush_tlb_mm(struct mm_struct *mm)
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
}
+ if (tlb_flag(TLB_V7_IS_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
}
static inline void
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
}
+ if (tlb_flag(TLB_V7_IS_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
}
static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
dsb();
isb();
}
+ if (tlb_flag(TLB_V7_IS_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
}
/*
__asm__ __volatile__( \
"1: ldrbt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
__asm__ __volatile__( \
"1: ldrt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
__asm__ __volatile__( \
"1: strbt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" &
projects / linux-2.6.git / commitdiff